Hi all.
I'm using Seadersn's 10162012 build which includes bricked kernel AFAIK. I've always just used default supported kernels up to now.
Do I need to flash modules?
Seems to be running fine as is but I don't want to overlook stuff if its needed for functionalities or running smoothly.
Sent from my HTC One X using xda app-developers app
conar said:
Hi all.
I'm using Seadersn's 10162012 build which includes bricked kernel AFAIK. I've always just used default supported kernels up to now.
Do I need to flash modules?
Seems to be running fine as is but I don't want to overlook stuff if its needed for functionalities or running smoothly.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
When you flash the Bricked kernel (which is the default kernel in CM10 these days), the ROM zip file that you flash from Recovery also has the kernel modules. So first you flash the boot.img on fastboot, then when you flash the ROM zip, the modules (which are inside it) also get flashed. That's why you don't need to flash modules separately.
When you want to use another AOSP kernel with CM10, then you flash the boot.img of that kernel, then the ROM zip, and then the modules of the new AOSP kernel you are flashing (because the ROM zip does not contain it).
Hope that answers your question.
I think it does.... thanks for that
Sent from my HTC One X using xda app-developers app
Can't yet reply on dev threads so hopefully I'll get an answer here.
Since the last update my phone seems to take about twice as long to charge.
The battery life is much improved with this latest flash so I'm happy to put up with it but is there anything I can do to improve this?
Sent from my HTC One X using xda app-developers app
Resolved by updating the rom
Sent from my HTC One X using xda app-developers app
Related
Happily I have flashed the new CM10 and rooted, and it is one of the greatest ROM's I have seen so far. But and update came out and Im wondering if I have to reflash the boot.img again or just flash the zip only to update it. I already have CM10 installed.
Also small question. What are your guys recommended undervolt values? I looked all over forums but could not find anything.
Always recommended-flash boot.img-wipe-flash ROM...but since ROM is same.
..wipe is not necessary..
Sent from my One V using xda app-developers app
Its not necessary that you always flash the kernel after a ROM update.. unless the thread specifies to do so .
Sent from my One V using xda app-developers app
just the zip brother!
fix miui v4 video problems
here are ics kernels included in viper rom (chinese ota kernel) and tazz's rom (leak kernel) to be used in other sense ics roms.
I actually made these to work with miui v4 as those have garbled video.
Any other rom which needs kernel updated can use this without any problems.
All credits should go to nitsuj17, tazzpirate and microdroid. All I did was extract kernel and hardware drivers from their roms and make a kernel update pakage.
flashing these kernels will fix garbled video problem in miui. both f these have working wifi and data. tested. these will not wipe data but make a backup just in case.
there's no point of flashing these kernels for a viper user. but tazz user may flash viper kernel to fix occasional wifi drop issue
flash only one.!! either tazz's one or viper one
thanks. :good: :laugh:
new version added. people having problems can try flashing that
Any one still having problems with these kernels just flash this boot.img from 4ext recovery after flashing the kernel zip fie.
http://d-h.st/Yvd - boot.img
http://d-h.st/b0A - new repacked viper kernel
fen0m said:
What I had to do to get this to work:
Boot the newest miui 12 21 I think
Open 4ext recovery CONTROL app
Select flash boot image.
Flash the new viper kernel in op
Camera looks great and hd recording is good.
Video playback is working well
Hope this helps someone
Sent from my supercharged viper miui
Click to expand...
Click to collapse
feel free to hit thanks button if i helped.
Is it need to flash both files???wish to use with kamals miui..
Sent from my Incredible 2 using xda app-developers app
rijujeevan said:
Is it need to flash both files???wish to use with kamals miui..
Sent from my Incredible 2 using xda app-developers app
Click to expand...
Click to collapse
of course not just flash either viper or tazz one.
I recommend to use viper.
*Macrodroid
Thank you for your contribution!
TA4S
I'm familiar with Viper's kernel since I've used viper rom but how does it differ from the one Tazz used? Is it just the Viper one having the wifi fix or is there more? Better yet is there even a reason to use Tazz's over Viper's?
I flashed the viper kernel over Miui and it gets stuck at the white HTC screen. Anyone else?
Sent from my Nexus 7 using xda app-developers app
Me to. I'm using the miui version right before the newest one tho
Using 1130 build
Sent from my pac
fen0m said:
Me to. I'm using the miui version right before the newest one tho
Using 1130 build
Sent from my pac
Click to expand...
Click to collapse
Me to, but only because I couldn't get the newest one to boot.
Sent from my ADR6350 using xda app-developers app
thenaut said:
I flashed the viper kernel over Miui and it gets stuck at the white HTC screen. Anyone else?
Click to expand...
Click to collapse
In what build???
I'm using it in 2.21.21 without any issues.
But I couldn't check it on cdma though!!
Im on gsm. But that shouldn't matter anyway.
Sent from my HTC Incredible 2 using xda app-developers app
thenaut said:
Me to, but only because I couldn't get the newest one to boot.
Click to expand...
Click to collapse
Newer one added in miui op download it and flash viper kernel
Sent from my HTC Incredible 2 using xda app-developers app
blaqbird said:
I'm familiar with Viper's kernel since I've used viper rom but how does it differ from the one Tazz used? Is it just the Viper one having the wifi fix or is there more? Better yet is there even a reason to use Tazz's over Viper's?
Click to expand...
Click to collapse
I think only viper kernel has fixed WiFi drop issue. Tazz kernel hasn't fixed it. And tazz kernel has some graphic driver issues so some items doesn't render properly in some games.
Sent from my HTC Incredible 2 using xda app-developers app
Here's a screen shot of my miui 2.12.21 running viper kernel.
Sent from my HTC Incredible 2 using xda app-developers app
casseer15 said:
Here's a screen shot of my miui 2.12.21 running viper kernel.
Sent from my HTC Incredible 2 using xda app-developers app
Click to expand...
Click to collapse
updated****!!!!
please try and provide feedback
What I had to do to get this to work:
Boot the newest miui 12 21 I think
Open 4ext recovery CONTROL app
Select flash boot image.
Flash the new viper kernel in op
Camera looks great and hd recording is good.
Video playback is working well
Hope this helps someone
Sent from my supercharged viper miui
fen0m said:
What I had to do to get this to work:
Boot the newest miui 12 21 I think
Open 4ext recovery CONTROL app
Select flash boot image.
Flash the new viper kernel in op
Camera looks great and hd recording is good.
Video playback is working well
Hope this helps someone
Sent from my supercharged viper miui
Click to expand...
Click to collapse
Thanx.
I'll add this to op
Sent from my HTC Incredible 2 using xda app-developers app
Happy new Year Everyone
casseer15 said:
fix miui v4 video problems
here are ics kernels included in viper rom (chinese ota kernel) and tazz's rom (leak kernel) to be used in other sense ics roms.
I actually made these to work with miui v4 as those have garbled video.
Any other rom which needs kernel updated can use this without any problems.
All credits should go to nitsuj17, tazzpirate and microdroid. All I did was extract kernel and hardware drivers from their roms and make a kernel update pakage.
flashing these kernels will fix garbled video problem in miui. both f these have working wifi and data. tested. these will not wipe data but make a backup just in case.
there's no point of flashing these kernels for a viper user. but tazz user may flash viper kernel to fix occasional wifi drop issue
flash only one.!! either tazz's one or viper one
thanks. :good: :laugh:
new version added. people having problems can try flashing that
Any one still having problems with these kernels just flash this boot.img from 4ext recovery after flashing the kernel zip fie.
http://d-h.st/Yvd - boot.img
http://d-h.st/b0A - new repacked viper kernel
feel free to hit thanks button if i helped.
Click to expand...
Click to collapse
Had someone been tried any of these kernel on ArcticICSed for the HTC Droid Incredible 2 ROM, Please let me know!!
thanks! :fingers-crossed:
I tried viper kernel on tazz rom and it worked. So I think these kernels will work on any Rom as long as its a vivow, sense based ics rom.
Sent from my HTC Incredible 2 using xda app-developers app
casseer15 said:
I tried viper kernel on tazz rom and it worked. So I think these kernels will work on any Rom as long as its a vivow, sense based ics rom.
Sent from my HTC Incredible 2 using xda app-developers app
Click to expand...
Click to collapse
Using this on MIUI, good work. Now all I need is to stop the radio from disconnecting for a few seconds when WIFI connects and I will be 100% content, until I get the itch to flash again, that is. Thanks again
Sent from my HTC Incredible 2 using xda app-developers app
thenaut said:
Using this on MIUI, good work. Now all I need is to stop the radio from disconnecting for a few seconds when WIFI connects and I will be 100% content, until I get the itch to flash again, that is. Thanks again
Sent from my HTC Incredible 2 using xda app-developers app
Click to expand...
Click to collapse
you're welcome. glad i could help.
:good:
Hi all guys. I flashed Ice col jelly 4.2.1 and i have some questions.. Why there si no photosphere option in camera app ? Which 3.x kernel can I sue for it to use project butter and optimize battery life ?
Hi. I've heard that photosphere is not supported on our device (it makes the camera app FC) and that's why developers removed it from their rom.
For the kernel, I don't know, I might be interested if someone has an answer.
PS : maybe you should be more specific in the title of your thread
I tried Trip's one x+ kernel on ICJ421 when it first came out it was v002 if I remember right. I was able to boot but got reboot after a minute of use.
The stock kernel is the best at the moment.
Sent from my HTC One X using xda app-developers app
JackIX said:
Hi. I've heard that photosphere is not supported on our device (it makes the camera app FC) and that's why developers removed it from their rom.
For the kernel, I don't know, I might be interested if someone has an answer.
PS : maybe you should be more specific in the title of your thread
Click to expand...
Click to collapse
Tnx man! Yes I forgot to erite a tittle but now i cant modify it!
TToivanen said:
I tried Trip's one x+ kernel on ICJ421 when it first came out it was v002 if I remember right. I was able to boot but got reboot after a minute of use.
The stock kernel is the best at the moment.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Maybe I will try this kernrl to know if the developer fixed this bug! How to flash the kernel ?
Repack the boot, flash like normal: fastboot flash boot boot.img
Then flash modules in recovery.
And nandroid before flashing!
Sent from my HTC One X using xda app-developers app
i tried both with viper x 3.3.1 and insertcoin v15.2.0. Every time I try to flash bricked kernel it flashes the kernel and then bootloop. I would really appreciate if someone would give me a zip file of faux kernel. I only find moduls on this site...
Please help I need a kernel.
Sent from my Nexus 7 using xda app-developers app
Currently there are no available custom kernels for the jelly bean base, because htc didnt release the kernel source code yet. All you can use will be the stock htc kernel that is also incorporated inside the rom when you extract it.
Sent from my HTC One X using xda app-developers app
There is the custom-stock kernel made by TripNDroid from Tegra3 references and from HOX+ source.
Just reflash the rom to fix the modules and reflash the original boot.img .....
Mr Hofs said:
Just reflash the rom to fix the modules and reflash the original boot.img .....
Click to expand...
Click to collapse
Yeah , and quit flashing ICS kernel onto JB rom , that can lead into some issues, bigger then you think.
Ok got it. Staying with viper x 3.2.2 and waiting for jb kernels to be created. When is htc giving the source to the devs?
Sent from my Nexus 7 using xda app-developers app
They should release the code about 90 days after the release.....but nobody knows for sure !
Hi, i'm still new about knowing android and installing custom roms. I recently installed ARHD 31.0 on my HOX and it's awesome! thanks mike. After the first boot, i tried to flash bricked 0.21, but it won't boot. I'm guessing it's a wrong move. So the question is there any kernels for this rom? The dirtier the better
I think not at this moment
Gesendet von meinem HTC One X mit Tapatalk 4
Rekon93 said:
Hi, i'm still new about knowing android and installing custom roms. I recently installed ARHD 31.0 on my HOX and it's awesome! thanks mike. After the first boot, i tried to flash bricked 0.21, but it won't boot. I'm guessing it's a wrong move. So the question is there any kernels for this rom? The dirtier the better
Click to expand...
Click to collapse
Try repackaging the kernel.
The only kernel currently working is trips kernel.
Sent from my HTC One X using xda app-developers app
treebill said:
Try repackaging the kernel.
The only kernel currently working is trips kernel.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
I've been trying the whole day today and i have trouble repacking kernels, dont really understand how and why i have to repack the kernel
Rekon93 said:
I've been trying the whole day today and i have trouble repacking kernels, dont really understand how and why i have to repack the kernel
Click to expand...
Click to collapse
http://nibble.cc/repack/
Source kernel (first box) is the boot.img that comes with the rom
New kernel (second box) is boot.img of the kernel.
Click upload and go make a sandwich.
You'll get a download link (valid for 3 hours) for your newly repacked boot.img
Download and flash in fastboot, restart into recovery and flash module. Wipe cache and dalvik cache
And enjoy.
Sent from my HTC One X using xda app-developers app