Related
Hello,
i have broken the amoled on my phone, its just the amoled. the touch and gorilla glass are just fine, i can answer call or make call sometime ( without seeing ).
i searched ebay and found digitalizer but amoled.
please tell me what i need and where can i get them. i like to have genuine Samsung's products.
looking forward to your immediate response.
Thanks
To my knowledge the digitizer and LCD are fused together meaning you have to replace both
Sent from my GT-I9100
Thank you so much
Sammy service center..Let them check it for you may be a bad connection.
Nyssa1104 said:
Sammy service center..Let them check it for you may be a bad connection.
Click to expand...
Click to collapse
i wish i could, the phone did't come with warranty
pretty sure the digitizer and lcd are a one piece, u might just have to get the lcd or else if ur confident open it up and have a look see if u can see any obvious problems
Is that meaning that NO warranty for the LCD??? curious about it
If you want to replace it yourself then you're going to need to buy a whole new screen unit. Even then it will be risky and fiddly replacing it. Unless you're an electrician you don't stand a chance replacing individual units. Replacing a digitizer on its own requires soldering anyway, a sure fire way to kill your phone if you don't know exactly what you are doing.
Hello guys,
10 minutes ago my galaxy note N7000 screen cracked in my pocket.
So I need to buy a replenishment screen from Samsung but I simply can't find stores that supplies replenishment parts for it. Do anyone knows where to buy a new Amoled LCD screen for galaxy note ?
Thank you and best regards,
Amid
ebay, took 5 days to ship from HK to NYC. Follow youtube guide in opening the note and use blow dryer/heat gun to loosen the sceen, wedge open with something sharp and slowly tear back the screen gently. You will need the old Wacom sensor from the broken screen so becareful to not to rip it. There is guide in the general section. I broke mine 2 weeks ago and replaced it in a hour. take your time you can get it done.
Thanks man. Just to be sure, the price is about US$ 230,00 for it ? i am not sure if I am looking for the right spare part.
amidsal said:
Thanks man. Just to be sure, the price is about US$ 230,00 for it ? i am not sure if I am looking for the right spare part.
Click to expand...
Click to collapse
I think this is what you are looking for:
http://www.ebay.com/itm/S-Black-Dig...087?pt=LH_DefaultDomain_0&hash=item2c65951cd7
I can try but I don´t think this will help the problem. The screen doesn´t show any images anymore, looks like a broken LCD. When you press it, a lot colors appears around it. Do you believe this is the one I need ?
Thank you and best regards
amidsal said:
I can try but I don´t think this will help the problem. The screen doesn´t show any images anymore, looks like a broken LCD. When you press it, a lot colors appears around it. Do you believe this is the one I need ?
Thank you and best regards
Click to expand...
Click to collapse
Hmmm no, in that case you will need the 200ish one.
You will need the entire setup, glass, LCD, and Touch. Does not come with Wacom sensor. Looking around you can get them for 230-260. Look for delivery, that makes a huge difference, especially with your phone out of commission.
This is the guy I purchased mine from, but I panic and purchase the first one I saw. If you do some research you will find cheaper, but I got min in 5 days. So I am glad this guy came thru. Good luck, its going to stress you out a bit when you have to remove the screen from the front panel, they are glued on so take your time. Looks like your LCD broke so it is going to crack and shatter further so make sure you do it in area where it is easy to clean. If you look at the front panel after you remove it, you will see one wire that does not come with the replacement one, that is for the wacom sensor, so be careful and don't damage that part, you will need to peel it off and place it back on to the replacement lcd, otherwise your s-pen won't work. It's been 2 weeks, my phone is going strong and no sensor or sceen issues. You should get a more protective case, since you probably already blew close to ~$1000 on this phone by now. I have a casemate, otterbox commuter looks like a good one. Once again good luck, you can do this.
Please stop advising people to do something that is not meant to be done and can possibly damage their phone even more. And most likely look completely rubbish when assembled.
The correct repair part is a complete display assembly including everything - the glass, digitizer, Wacom digitizer, AMOLED, bezel, frame abd home button. It costs around 260 dollars on eBay and is relatively simple to install. By installing the complete assembly you don't need to worry about separating the glass and AMOLED or about the Wacom digitizer, since they are all included. Just remove the screws, back housing and motherboard, disassemble the audio flex cable and front camera flex from the old display and put them into the new one. Most displays also require the old charger port flex and speaker module to be used.
The correct part looks like this, for example: http://pages.ebay.com/link/?nav=item.view&id=320843198847
Well mine looks brand new, must be the workmanship ;-P But why flame my advise when he is going to need to do it anyways, the screen is completely useless, as was mine. Why don't you keep your assumption to yourself in how it will look or if he is going to ruin the device. If he decides that he would rather live with a crack screen or someone who is willing to do it, there really isn't much options here. What's up with such negative attitude here. Just trying to show him that it can be done.
---------- Post added at 04:30 PM ---------- Previous post was at 04:26 PM ----------
jusutus said:
The correct part looks like this, for example: http://pages.ebay.com/link/?nav=item.view&id=320843198847
Click to expand...
Click to collapse
Look at the delivery time. I got mine in 5 days. just talked to the seller.
Replacement screen with 2 connectors
Hello!
First of all I would like to say Thank you for all the resources provided in this forums!
Could someone please help me to find a replacement screen for the International version of the Galaxy Note GT-N7000 with 2 connectors? This phone has the physical home button. All the replacements that I've been able to find have just the first connector. I tried to post a photo hoping to help better explain it, but I can't do it yet.
Thank you in advance for your cooperation!
Leo.F said:
Hello!
First of all I would like to say Thank you for all the resources provided in this forums!
Could someone please help me to find a replacement screen for the International version of the Galaxy Note GT-N7000 with 2 connectors? This phone has the physical home button. All the replacements that I've been able to find have just the first connector. I tried to post a photo hoping to help better explain it, but I can't do it yet.
Thank you in advance for your cooperation!
Click to expand...
Click to collapse
Hello, I have got repaired my GN in Samsung service (Slovakia) for 165 €. I have had the same problem. I think, that should be the best way.
s.magus said:
Hello, I have got repaired my GN in Samsung service (Slovakia) for 165 €. I have had the same problem. I think, that should be the best way.
Click to expand...
Click to collapse
Thank you s.magus! I would love to go that route, but I'm in Venezuela, and Samsung is selling the GN, but does not yet have replacement parts. You're right, that will be the best way.
n7000 replenishment screen
hello jignesh here .... i hav note gt n7000 ... it working 100% normally ... just cracked screen or glass or lcd ... i dont know what is problem .... can u tell me what is the problem .... glass cracked or screen cracked or lcd cracked ???? how can i find problem ???? touch and everything is working perfectly as like new note .... i already using note since 1month ... but now i want to repair it ... so what can i do ??? just change the front glass or change lcd ??? please reply me ....
Where is the cheapest part in uk?
is there anyone in India who could tell the price of galaxy note's white screen touch (not the lcd screen).Thanks in advance....:good:
I can recommend this site, they send working usb module
http://www.parts4repair.com/.
They have other parts also
Sent from my GT-N7000 using Tapatalk 2
baz77 said:
I can recommend this site, they send working usb module
http://www.parts4repair.com/.
They have other parts also
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
SUPER NICE !!!!
After a search for 5 days ... This one is the best !!!
THNX baz77
your welcome, hope you fix yer stuff and be carefull electronics is delicate stuff
Sent from my GT-N7000 using Tapatalk 2
i disagree
Hi ,
I think Senior member Justis is right... many of us dont want to do a full screen replacement for 220$...when we can just remove the front screen for 20$..many have done this method successfully... U just need to watch a lot of youtube videos on this and be careful/delicate with the procedure... its possible.
So i dont think what he said was a waste.. Pls keep such remarks to yourself.. He was not wasting anyones time.
Infact you are wasting my time making me read your message and give u a reply.
You know what...im doing a screen replacement too... thats what guys do first. njot jump in and do a full replacement for 220 $.:good::good::good:
jusutus said:
Please stop advising people to do something that is not meant to be done and can possibly damage their phone even more. And most likely look completely rubbish when assembled.
The correct repair part is a complete display assembly including everything - the glass, digitizer, Wacom digitizer, AMOLED, bezel, frame abd home button. It costs around 260 dollars on eBay and is relatively simple to install. By installing the complete assembly you don't need to worry about separating the glass and AMOLED or about the Wacom digitizer, since they are all included. Just remove the screws, back housing and motherboard, disassemble the audio flex cable and front camera flex from the old display and put them into the new one. Most displays also require the old charger port flex and speaker module to be used.
Click to expand...
Click to collapse
Hey everyone,
Just yesterday, I managed to somehow do this : http://dl.dropbox.com/u/62874133/IMG_20120815_022135-1.jpg to my phone. However, the phone still registers the touch inputs even on the crack ( see : http://dl.dropbox.com/u/62874133/Screenshot_2012-08-15-12-21-48.png ). Does this mean I just need a new lens as found here : http://www.ebay.com/itm/Black-Front...ltDomain_0&hash=item53ee3cff34#ht_1596wt_1165 ? Or do I need a new digitizer as found here : http://www.ebay.com/itm/Frame-LCD-T...000?pt=LH_DefaultDomain_0&hash=item3cc82f3618 ?
Thanks so much.
ohhh that sucks!!
I got my screen broken too and like yours touchscreen was still working. I had to pay around $40 to the local repair shop to replace it.. i think new lens will be good enough for you.. but before you buy, go to a repair shop for checking i guess
shahadat said:
ohhh that sucks!!
I got my screen broken too and like yours touchscreen was still working. I had to pay around $40 to the local repair shop to replace it.. i think new lens will be good enough for you.. but before you buy, go to a repair shop for checking i guess
Click to expand...
Click to collapse
I went to 5 repair shops and they said that they would need to change the entire thing so it would be around $190. Which shop did you go to? The touchscreen works fine, so does this mean that they are wrong?
If I'm not mistaken the "display" is glued to the digitizer, basically the glass is the digitizer. If you do plan to separate the screen from the glass I would be extremely cautious while doing so. As one mistake can scratch the display.
The Glass, digitizer and screen are glued together, afaik this is what the "super" means in AMOLED.
You might be able to separate them, but I don't know of anyone who had managed to.
Tbh your best bet is to replace the whole unit
Separating digitizer from glass would be plain hard,but your digitizer is still in one piece.you could try it,but it would be hard and you need to be very careful.if you suceed,buy just the glass,if you break the whole thing,pay for the total replacement,you end up with the same thing.
Sent from my Galaxy Nexus using xda premium
Yes they are glued and you have to buy the set. When they get calibrated together its then set. Separating them gives the chance that you may not line up where you touch and that same point on the display.
Thanks so much for your replies!
Well, considering the fact that a new Galaxy Nexus is $300 at a local store, I'll pass on getting the new digitizer + lcd panel. Has anyone tried taking out the LCD and putting a new one? (Like this : http://www.ebay.com/itm/Black-Front...6256&pid=100011&prg=1005&rk=1&#ht_1290wt_1165 )? Does anyone know if it's still possible? I'd really like for this phone to be in perfect shape :/
Hi!
So as the question might have made it clear, I dropped my grand and cracked the screen.
Details:
Got a hairline crack on the screen on the bottom right part, about 2 inches in total length. Touch and visuals still perfectly normal. But the glass needs to be changed anyways.
The Questions:
How much would it cost to get it changed from the Samsung Care centers?
And since i've never EVER had to send a phone to service centers, how much time would it take to get it fixed?
Also, will the replaced glass quality be the same? Is there any difference in anything after the repair? Anything at all?
And is it advisable to get it repaired locally?
Also, is it possible to get it fixed by myself? Yeah i've read a lot of DIY tutorials, but they seem risky, especially that i've never done it before.
CyberZ-JB said:
Hi!
So as the question might have made it clear, I dropped my grand and cracked the screen.
Details:
Got a hairline crack on the screen on the bottom right part, about 2 inches in total length. Touch and visuals still perfectly normal. But the glass needs to be changed anyways.
The Questions:
How much would it cost to get it changed from the Samsung Care centers?
And since i've never EVER had to send a phone to service centers, how much time would it take to get it fixed?
Also, will the replaced glass quality be the same? Is there any difference in anything after the repair? Anything at all?
And is it advisable to get it repaired locally?
Also, is it possible to get it fixed by myself? Yeah i've read a lot of DIY tutorials, but they seem risky, especially that i've never done it before.
Click to expand...
Click to collapse
i would suggest you to sell your grand after changing the screen..
your answers
A1. Dont know. you may get idea on net
A2. depends on your service center.
A3. the quality will be low as compared to you use right now.
A4. if your local vendor knows you personally then only its advisable .
A5. yea its easy... but take all precautions.
Kishan14 said:
i would suggest you to sell your grand after changing the screen..
your answers
A1. Dont know. you may get idea on net
A2. depends on your service center.
A3. the quality will be low as compared to you use right now.
A4. if your local vendor knows you personally then only its advisable .
A5. yea its easy... but take all precautions.
Click to expand...
Click to collapse
Quality will be low, but could you explain in what sense?
Like, how?
Rougher touch?
Not as good display? Even then, what would be bad in there? Something wrong with the color?
Just want to know what quality are you specifying.
CyberZ-JB said:
Quality will be low, but could you explain in what sense?
Like, how?
Rougher touch?
Not as good display? Even then, what would be bad in there? Something wrong with the color?
Just want to know what quality are you specifying.
Click to expand...
Click to collapse
Your display is cracked too... Ryt? So when you replace it there will be some brightness problem... Can say a bit dull... Sometimes touch problem.. But there are less chance of tch prob... Everything depends on your service center.... Fitting and all...
Sent from my GT-I9082 using Tapatalk
Kishan14 said:
Your display is cracked too... Ryt? So when you replace it there will be some brightness problem... Can say a bit dull... Sometimes touch problem.. But there are less chance of tch prob... Everything depends on your service center.... Fitting and all...
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
As I mentioned in the post, "Got a hairline crack on the screen on the bottom right part, about 2 inches in total length. Touch and visuals still perfectly normal. But the glass needs to be changed anyways.".
ONLY the glass is cracked. That's all. Just the glass. That too, not much, unnoticeable at certain angles and lighting conditions. But still annoying to use it. So I just want the glass changed. Everything else is perfect.
CyberZ-JB said:
As I mentioned in the post, "Got a hairline crack on the screen on the bottom right part, about 2 inches in total length. Touch and visuals still perfectly normal. But the glass needs to be changed anyways.".
ONLY the glass is cracked. That's all. Just the glass. That too, not much, unnoticeable at certain angles and lighting conditions. But still annoying to use it. So I just want the glass changed. Everything else is perfect.
Click to expand...
Click to collapse
So, the display and touch problems can be ruled out now?
Apart from that, what else?
CyberZ-JB said:
Hi!
So as the question might have made it clear, I dropped my grand and cracked the screen.
Details:
Got a hairline crack on the screen on the bottom right part, about 2 inches in total length. Touch and visuals still perfectly normal. But the glass needs to be changed anyways.
The Questions:
How much would it cost to get it changed from the Samsung Care centers?
And since i've never EVER had to send a phone to service centers, how much time would it take to get it fixed?
Also, will the replaced glass quality be the same? Is there any difference in anything after the repair? Anything at all?
And is it advisable to get it repaired locally?
Also, is it possible to get it fixed by myself? Yeah i've read a lot of DIY tutorials, but they seem risky, especially that i've never done it before.
Click to expand...
Click to collapse
1. Cost is what you can know by approaching service centre. But you will get an idea if you take time to have a live chat with Samsung in web.
2. Depends on your place, service will be speedy if its a city, but you should wait atleast 1 week. They order for spare after you give it for service, and it should arrive your place.
3. The replaced display should be of the same quality as factory product. But since you are not under warranty, i guess because you are gonna pay, there is a less chance they may buy a substandard display from other sources and fit it in your cell after taking money from you. This depends on the officials there. The chance is very less.
There should not be any difference after replacing, this depends on the service personnel his workmanship and experience.
I got my display replaced once when i was under warranty. Display is same as my factory Display. Never had any problem.
4. Not Advised
5. Result may be disastrous
DMJoh said:
1. Cost is what you can know by approaching service centre. But you will get an idea if you take time to have a live chat with Samsung in web.
2. Depends on your place, service will be speedy if its a city, but you should wait atleast 1 week. They order for spare after you give it for service, and it should arrive your place.
3. The replaced display should be of the same quality as factory product. But since you are not under warranty, i guess because you are gonna pay, there is a less chance they may buy a substandard display from other sources and fit it in your cell after taking money from you. This depends on the officials there. The chance is very less.
There should not be any difference after replacing, this depends on the service personnel his workmanship and experience.
I got my display replaced once when i was under warranty. Display is same as my factory Display. Never had any problem.
4. Not Advised
5. Result may be disastrous
Click to expand...
Click to collapse
Thanks @DMJoh, that was really helpful. Especially points 2 and 3. Would look into it about the replacement thing. Thanks a lot again.
video tutorial
CyberZ-JB said:
Hi!
So as the question might have made it clear, I dropped my grand and cracked the screen.
Details:
Got a hairline crack on the screen on the bottom right part, about 2 inches in total length. Touch and visuals still perfectly normal. But the glass needs to be changed anyways.
The Questions:
How much would it cost to get it changed from the Samsung Care centers?
And since i've never EVER had to send a phone to service centers, how much time would it take to get it fixed?
Also, will the replaced glass quality be the same? Is there any difference in anything after the repair? Anything at all?
And is it advisable to get it repaired locally?
Also, is it possible to get it fixed by myself? Yeah i've read a lot of DIY tutorials, but they seem risky, especially that i've never done it before.
Click to expand...
Click to collapse
Here is a video how to fix a touch screen on a samsung galaxy grand 2 link herehttps://youtu.be/Id95veDZvL4
Hey guys, I bought the Samsung Galaxy TabPro 8.4 LTE variant (SM-T325) and unfortunately, just after 2 weeks of use, my friend dropped it and cracked the screen and scratched the bezels. I live in the UK and I bought this tab online. I know dropping the tab is out of warranty and I have to pay for the damages but I have contacted Samsung which they referred me to some of their repair centres but with no hope as they couldn't replace/repair the damage because my tab is the LTE variant and it's not of European Region.
I'm pretty pissed that my beautiful TabPro 8.4 is cracked and I'd do anything to fix it.
I just want to ask you guys for advice on how I should fix my tab if official samsung repair centres here can't do it because they don't have the parts? Or is my best bet taking it to a repair centre in Asia (where it's most likely from)?
Thank you if anyone replies ;_;
Not good when you crack your screen
The only and best advice i can give you is check Ebay, look up LCD & Digitizer for Galaxy Tab Pro 8.4 LTE, you should find it there. The best of luck Buddy..
Zakanam said:
Hey guys, I bought the Samsung Galaxy TabPro 8.4 LTE variant (SM-T325) and unfortunately, just after 2 weeks of use, my friend dropped it and cracked the screen and scratched the bezels. I live in the UK and I bought this tab online. I know dropping the tab is out of warranty and I have to pay for the damages but I have contacted Samsung which they referred me to some of their repair centres but with no hope as they couldn't replace/repair the damage because my tab is the LTE variant and it's not of European Region.
I'm pretty pissed that my beautiful TabPro 8.4 is cracked and I'd do anything to fix it.
I just want to ask you guys for advice on how I should fix my tab if official samsung repair centres here can't do it because they don't have the parts? Or is my best bet taking it to a repair centre in Asia (where it's most likely from)?
Thank you if anyone replies ;_;
Click to expand...
Click to collapse
Zakanam said:
Hey guys, I bought the Samsung Galaxy TabPro 8.4 LTE variant (SM-T325) and unfortunately, just after 2 weeks of use, my friend dropped it and cracked the screen and scratched the bezels. I live in the UK and I bought this tab online. I know dropping the tab is out of warranty and I have to pay for the damages but I have contacted Samsung which they referred me to some of their repair centres but with no hope as they couldn't replace/repair the damage because my tab is the LTE variant and it's not of European Region.
I'm pretty pissed that my beautiful TabPro 8.4 is cracked and I'd do anything to fix it.
I just want to ask you guys for advice on how I should fix my tab if official samsung repair centres here can't do it because they don't have the parts? Or is my best bet taking it to a repair centre in Asia (where it's most likely from)?
Thank you if anyone replies ;_;
Click to expand...
Click to collapse
I hate that it happened to u too but if all u did was crack the digitizer glass then consider yourself lucky because that part can be found all over the internet for as low as $40 (i'll link to a site below but as the user above said they are also on ebay...although for a higher price)...how about I also have the lte version BUT I broke the actual lcd display and somehow managed NOT to shatter the glass (weird but true). The crazy thing is I didn't even drop it...just picked it up and it was cracked/bleeding inside...not even sure if its something I did & not looking forward to arguing with Samsung about it either not to even mention the fact that's its actually a hong kong unit. The ironic part is I actually fix these things for a living but I cant find the screen anywhere online yet...if u decide to get rid of it for whatever reason then I would be willing to purchase the lcd from u (assuming u didn't break both screens) for a reasonable price & in order to help u make your money back. I could also part it out & put it on ebay for u...the motherboard alone should get a pretty penny
http://www.parts4repair.com/touch-screen-digitizer-for-samsung-galaxy-tab-pro-8-4-t320-t325-t321-black/?ref=lexity&_vs=google&_vm=productsearch&gclid=CK-_8fLzhL4CFe5aMgodskEASQ
^cheapest link I found (I cant vouch for the credibility of the sute bit as I stated above the part can be found at mor popular places as well)
THEDEVIOUS1 said:
I hate that it happened to u too but if all u did was crack the digitizer glass then consider yourself lucky because that part can be found all over the internet for as low as $40 (i'll link to a site below but as the user above said they are also on ebay...although for a higher price)...how about I also have the lte version BUT I broke the actual lcd display and somehow managed NOT to shatter the glass (weird but true). The crazy thing is I didn't even drop it...just picked it up and it was cracked/bleeding inside...not even sure if its something I did & not looking forward to arguing with Samsung about it either not to even mention the fact that's its actually a hong kong unit. The ironic part is I actually fix these things for a living but I cant find the screen anywhere online yet...if u decide to get rid of it for whatever reason then I would be willing to purchase the lcd from u (assuming u didn't break both screens) for a reasonable price & in order to help u make your money back. I could also part it out & put it on ebay for u...the motherboard alone should get a pretty penny
http://www.parts4repair.com/touch-screen-digitizer-for-samsung-galaxy-tab-pro-8-4-t320-t325-t321-black/?ref=lexity&_vs=google&_vm=productsearch&gclid=CK-_8fLzhL4CFe5aMgodskEASQ
^cheapest link I found (I cant vouch for the credibility of the sute bit as I stated above the part can be found at mor popular places as well)
Click to expand...
Click to collapse
LowaEastSide said:
The only and best advice i can give you is check Ebay, look up LCD & Digitizer for Galaxy Tab Pro 8.4 LTE, you should find it there. The best of luck Buddy..
Click to expand...
Click to collapse
Thanks guys for replying, I totally appreciate it but yeah, my LCD itself isn't broken, just the glass so the touch screen digitizer is what I need. However, if I buy from eBay or from the given link, will the glass be of the same quality/made from the same thing? Cause the touch screen glass on the TabPro 8.4 feels so smooth and not cheap so I don't really wanna change that :/
And also, do you guys now if they sell the bezels? since they scratched too
Thanks again!
Wow.
Im sorry to read the situation the both of you are in, as for the first post i replied to i did mention the LCD & Digitizer, however doing the research on Ebay the Digitizer Cant be found, that really sucks, just makes me MUCH MORE aware of NOT dropping my device, they do feel really light a delicate, with that said I love watching movies on it in 1080p, the clarity is unbelievable. I'm loving this device, But on the other hand there isn't any development for it out, really sucks cause i was looking to switch it to the Google Addition of Android.. Or if a developer can cook up a Custom Rom from the S5 Operating System that would be SICKKK... That how i have my Note 3 running, exactly like the S5, its hottt... the best of Luck to you both, hope it works out. BLESS..!!
THEDEVIOUS1 said:
I hate that it happened to u too but if all u did was crack the digitizer glass then consider yourself lucky because that part can be found all over the internet for as low as $40 (i'll link to a site below but as the user above said they are also on ebay...although for a higher price)...how about I also have the lte version BUT I broke the actual lcd display and somehow managed NOT to shatter the glass (weird but true). The crazy thing is I didn't even drop it...just picked it up and it was cracked/bleeding inside...not even sure if its something I did & not looking forward to arguing with Samsung about it either not to even mention the fact that's its actually a hong kong unit. The ironic part is I actually fix these things for a living but I cant find the screen anywhere online yet...if u decide to get rid of it for whatever reason then I would be willing to purchase the lcd from u (assuming u didn't break both screens) for a reasonable price & in order to help u make your money back. I could also part it out & put it on ebay for u...the motherboard alone should get a pretty penny
http://www.parts4repair.com/touch-screen-digitizer-for-samsung-galaxy-tab-pro-8-4-t320-t325-t321-black/?ref=lexity&_vs=google&_vm=productsearch&gclid=CK-_8fLzhL4CFe5aMgodskEASQ
^cheapest link I found (I cant vouch for the credibility of the sute bit as I stated above the part can be found at mor popular places as well)
Click to expand...
Click to collapse
LowaEastSide said:
Im sorry to read the situation the both of you are in, as for the first post i replied to i did mention the LCD & Digitizer, however doing the research on Ebay the Digitizer Cant be found, that really sucks, just makes me MUCH MORE aware of NOT dropping my device, they do feel really light a delicate, with that said I love watching movies on it in 1080p, the clarity is unbelievable. I'm loving this device, But on the other hand there isn't any development for it out, really sucks cause i was looking to switch it to the Google Addition of Android.. Or if a developer can cook up a Custom Rom from the S5 Operating System that would be SICKKK... That how i have my Note 3 running, exactly like the S5, its hottt... the best of Luck to you both, hope it works out. BLESS..!!
Click to expand...
Click to collapse
I actually replied to your thread about custom roms with something I was working on before the incident happened...its an extremely basic test build so its probably no where near what u want (no s5 setup) but if u want to test it out I posted the link in the other thread. I wish it was just my glass that was broken right now because it would already be fixed....I was able to find the digitizers on ebay althought there are only a few listings I'll post the lowest link below
EDIT: nevermind...probably should have checked my pm first. As far as the selinux function...if u go to "settings-general-about device" and scroll down to the very bottom u should see "se for android device" which will probably say "enforcing" although hopefully it will be set to "permissive" which would allow us to connect NTFS(WINDOWS) formatted hard drives to our device as well as other things
Zakanam said:
Thanks guys for replying, I totally appreciate it but yeah, my LCD itself isn't broken, just the glass so the touch screen digitizer is what I need. However, if I buy from eBay or from the given link, will the glass be of the same quality/made from the same thing? Cause the touch screen glass on the TabPro 8.4 feels so smooth and not cheap so I don't really wanna change that :/
And also, do you guys now if they sell the bezels? since they scratched too
Thanks again!
Click to expand...
Click to collapse
@Zakanam as for the quality of the part as far as I know most lcds are factory originals while most digitizers are usually aftermarket reproductions although I haven't EVER had an issue with any I've replaced as far as registering touches or smoothness. As I stated above device repair is part of what I do for a living although i'll admit I may have just been lucky...u will most likely have to wait until someone puts an 8.4 up for parts on ebay before u can find the bezels however I hope this helps
http://www.ebay.com/itm/Touch-Screen-Digitizer-Glass-For-Samsung-Galaxy-Tab-Pro-8-4-T320-T321-T325-/201077168569?pt=Other_Tablet_eReader_Accessories&var=&hash=item2ed12219b9
^CHEAPEST DIGITIZER ON EBAY
Does anyone know where I can buy the OEM backplate and possibly the cheap silver trim between the backplate and the screen?
I wrote a review on Amazon about what happened under the same name. Got nowhere with Samsung support, while looking for parts I found this post. Figured someone here may know.
THEDEVIOUS1 said:
I hate that it happened to u too but if all u did was crack the digitizer glass then consider yourself lucky because that part can be found all over the internet for as low as $40 (i'll link to a site below but as the user above said they are also on ebay...although for a higher price)...how about I also have the lte version BUT I broke the actual lcd display and somehow managed NOT to shatter the glass (weird but true). The crazy thing is I didn't even drop it...just picked it up and it was cracked/bleeding inside...not even sure if its something I did & not looking forward to arguing with Samsung about it either not to even mention the fact that's its actually a hong kong unit. The ironic part is I actually fix these things for a living but I cant find the screen anywhere online yet...if u decide to get rid of it for whatever reason then I would be willing to purchase the lcd from u (assuming u didn't break both screens) for a reasonable price & in order to help u make your money back. I could also part it out & put it on ebay for u...the motherboard alone should get a pretty penny
http://www.parts4repair.com/touch-screen-digitizer-for-samsung-galaxy-tab-pro-8-4-t320-t325-t321-black/?ref=lexity&_vs=google&_vm=productsearch&gclid=CK-_8fLzhL4CFe5aMgodskEASQ
^cheapest link I found (I cant vouch for the credibility of the sute bit as I stated above the part can be found at mor popular places as well)
Click to expand...
Click to collapse
In the same predicament. The lcd display on my 8.4 LTE T325 is broken, but the digitizer still recognizes touch. Finding a replacement screen is a pain, especially in the UK. Only quote I've managed to get is for £169, which is more than what I paid for it on ebay....decisions decisions...
stoney73 said:
In the same predicament. The lcd display on my 8.4 LTE T325 is broken, but the digitizer still recognizes touch. Finding a replacement screen is a pain, especially in the UK. Only quote I've managed to get is for £169, which is more than what I paid for it on ebay....decisions decisions...
Click to expand...
Click to collapse
Similar situation when I broke the screen on my Note 8. While glass was available at a reasonable price, the process to get it unglued from the digitizer looked too involved for me. The price for screen + digitizer was similar to the price of buying a new Note 8. So my solution . . . was to buy the Pro 8.4!
redpoint73 said:
Similar situation when I broke the screen on my Note 8. While glass was available at a reasonable price, the process to get it unglued from the digitizer looked too involved for me. The price for screen + digitizer was similar to the price of buying a new Note 8. So my solution . . . was to buy the Pro 8.4!
Click to expand...
Click to collapse
Lol. My solution was to buy the tab S 8.4 LTE. Still wondering whether it's worth fixing the tab pro or not
Hello, i broke my lcd a week after buying it and found only one place that has the digitizer and lcd as one unit. Its costly! $159.00 + $10.00 shipping from Singapore! here is the link
http://www.parts4repair.com/samsung-galaxy-tab-pro-8-4-t320-parts/
I did it on mine but proly could have found a new tablet for the cost! The repair was very easy.
Hi I have a similar problem but with a different tablet thr tab 4 7 inch which does not have gorilla glass so whatever glass is put in it does the tabpro have gorilla glass?
Anyway 2 days after buying it I sat on my tab 4 by accident while it was sitting in its box on my bed, the tablet just sunk to 1 side and collapsed in the box so I am hoping I didn't do any damage. Ive been so worried about it when I look at the screen and lcd thrre is no damage or cracks I can see is it possible the lcd at thr back of it cluld be cracked? Or is it pretty obvious if it is cracked?
Looking at youtube for vids I see cracked screens but if thr lcd is cracked even just a little bit will it show?
I put thr tablet back in thr box an d pushed down on it with my fingers to try to see how mufh pressure it takes to collapse in the box again..and I heard a crack sound im so stupid..I don't see any damage still and I think the crack sound was from the see through plastic sheet inside rhe box and the cardboard pressing dosn against it.
If I dont see any cracks or damage to thr lcd is it most likely ok? Im so paranoid now. Maybe I should return it just ij case and get a replacement seeing as I am in my 28 day returns period
Is it safe to assume if I can't see any cracks its unlikely to br damaged?
i may say had a bad luck when buying online via lazada.my , CANT claim warranty . still under warranty, not caused by dropping, its factory defect.. sent to singapore but not fixed, send to local seller and returned back. this is my timeline https://www.youtube.com/watch?v=9DD4dz3VTUs
no choice i gotta put aside till have enough money by myself. looking at aliexpress and dhgate, price still beyond my budget
fyi, aliexpress and dhgate i had good purchase track record
please watch and spread this https://www.youtube.com/watch?v=9DD4dz3VTUs
price complete set http://www.aliexpress.com/item/For-...2272498413.html?spm=2114.32010308.5.11.WBmYM2
might be mean but if your friend dropped it, he should be paying
this happened to me to, but about a month, and a half latter.
THE ONLY ADVICE I would give you is to go take it somewhere and get it fixed by a professional. If you follow that one YouTube Video, all your going to manage is cracking the Actual Display underneath the Glass. As it is these pieces are fused and, are essentially one unit. While it might be possible to just replace the Glass. It's doubtfull that finding the right fixer (i.e. Glue) would-be that simple. It also (to me) seems like the Tab Pro also has a thin polarising film between the Glass and the LCD display. Which was too easily damaged with the String technique. Not so much a problem if you have an extra 50.00€ for a pack of 25 Strips @ 8.4"
About your best option is to locate the next Samsung Depot (for myself that would be in the Netherlands), and they want ca. ~120.00€ (Before Tax!), for a replacement unit. (i.e. the Touchscreen + LCD + Frame. e.g. more like 169~€ by the time you work out shipping & tax.
Having a thought about it... It was just cheaper in the end to by a totally new neused Device. Which then set me back a 175.00€.
but those Displays from Fleebay, are as I gather chepo counterfeit Chinese Displays which are not as good as the original ones. Be that as it may... I'd have yet to find one that came with the Frame (i.e. with the Home Button.), cause for ~115€ they sure don't, and again you'd have to figure out how to reglue that bit without destroying the new Display.
1miracle2 said:
Does anyone know where I can buy the OEM backplate and possibly the cheap silver trim between the backplate and the screen?
I wrote a review on Amazon about what happened under the same name. Got nowhere with Samsung support, while looking for parts I found this post. Figured someone here may know.
Click to expand...
Click to collapse
My guess is your supposed to recycle the Backplate from the Original Screen. I guess getting it off the old one may be one thing. But how you'd go about regluing it back to the new Screen is to me questionable.
The 'Silver' bit is the rear cover. So One would think you already had that bit. in fact it's between this and the Glass Panel where you need to take a thin but very stiff like a Driver's License. To pry open the Device.
Again the best way to go is either though Samsung Direct, or one of its other partners.
It would also be helpful to know the Part Nr. Which are:
GH97-15740A (White)
GH97-1574B (Black)
Needless to say at those prices... You may well be better off buying a whole new Device.
I have an excellent condition digitizer but the glass is cracked. If wants to buy it they will have to remove the glass. Its from a T705
I too have a replacementWhite Digitizer Screen (White), still in the Envelope it came in with. Which I bought in a panic, after having also dropped my first T325. T_T.
Unless your very skilled, or know someone who is, at removing said Damaged Digitizer. I would forget this exercise. As you will at the least of it damage the Polarising Filter (Between the Digitizer, and the LCD Display), and at worst actually damage the LCD Display.
Having replaced a few Chinese Devices with their cheap plastic Digitizers is nothing like the way Samsung have done it. Unfortunately both the Digitizer, and the LCD have been fused together, as One unit. Again with a sandwiched Polarising Filter in the Middle.
There have been some Videos of People fixing the T320 that way, but the T320 doesn't have a Speaker Grill on it either. When I tried it on m, first One, the Dental Floss kept getting caught on it, an eventually damaged the underlying Filter (Which if you had done this would appear as just White Light.) Eventually in that game of tug, and war the LCD completely disintegrated.
I eventually found the Part Number (from a Samsung Tech Manual) p, and was able to locate two possible locations from which to order a replacement Screen from. Samsung in the Netherlands, and some other 3'erd Party from Poland. But either way you were looking at about 160€'s before Postage, and VAT (e.g. Sales Tax, which was higher in the NL). Making a total replacement, both simplier, and more cost effective.
Did you try heating it up like in the videos? I think the key is getting the glue loosened up