For last few months, my desire brakes phone calls randomly and sometimes doesn't brake calls at all - going mad about it.
What can cause this?
I have never flashed any rom, radio, kernel etc..
I am on latest official rom 2.2.2 - S-OFF/ROOT (Revolutionary) - 4EXT recovery - Link2SD - 1GB EXT3...or FAT32
Baseband: 32.49.00.32U_5.11.05.27
Kernel: 2.6.32.15-gf5a401c [email protected] #1
Build no: 2.29.405.14 CL345208
Software: 2.29.405.14
Browser: Webkit 3.1
Hboot
Bravo PVT1 Ship S-OFF
Hboot-6.93.1002
Microp-031d
Touchpanel-synw0101
Radio-5.11.05.27
Aug 10 2010
Any advice on what to do?
Can it be bad sim???
I would like to keep official rom if possible
I have the same problem, but it hasn't happenend very often so I haven't really cared. I don't know what fixes it, just wanted to let you know that you're not alone on this
Thanks for letting me know, I really don't know what to do..maybe I restore it to factory default state, with S-on, no extended mem partition, etc..
1st and most important function of all phones are calls - if that doesn't work then I don't have use of it.
I'm not sure if I already had the problem before I went S-Off, but it certainly happend before I got extended memory. So that should not be the problem.
Related
I must be the dumbest guy in the world, I got my Desire only 3 days and I screwed up. I wanted to try some custom roms and I did. Now I want to recover to the orginal RUU and root that and customize that.
But that isin't going to work like I want it to work.
My information:
Bravo PVT1 SHIP S-ON
HBOOT-0.80.0000
Microp-031d
Radio-4.06.00.02-2
My ROM:
2.1-update1
32.36.00.28U_4.06.00.02_2
2.6.29-0cb9f166 (htc-kernel - and18-2 #1)
1.21.405.2 CL174215 release-keys
Now I tried to use the follow RUU: RUU_Bravo_HTC_WWE_1.21.405.2_Radio_32.36.00.28U_4.06.00.02_2_release_126984_signed.exe but that is giving me a error 155 even before its going to load the bootloader.
Am I using the wrong RUU. Is something blocking? Can I downgrade my HBOOT to 0.75?
What should I do to go back to my Out of the Box desire?
Thanks.
Solved. Had to manually put my phone in the bootloader menu.
Sent from my HTC Desire using XDA App
hi there,
i have a htc desire. it was bought on o2 ireland. it was unlocked when i bought it. it came with the 2.1 software on it.
i followed a guide initially on hoz id lv entitled o2-ireland-de-branding-and-froyo. i can't post the link because i'm still a new user here and the system won't let me.
when i installed the 2.2 update the device kept rebooting constantly after giving me the force quit / wait error message for the "system" process everytime i booted.
i've tried a couple of other things since, a long list of messed up methods which i should really have put more thought and effort into.
as i stand now i have a htc desire which boots up but is very unresponsive when it does. i can't actually run anything on it. i can't drag down the notifications menu. i can't access the applications list. i can go into menu > settings > about phone and have this under software information:
android version: 2.2
baseband version: 32.36.00.28u_4.06.00.02_2
kernel version: 2.6.29-0cb9f166 htc-kernal and18-2 #1
build number: 2.10.405.2 cl226611 release-keys
software number: 2.10.405.2
browser version: webkit 3.1
Click to expand...
Click to collapse
so the phone as it stands is not usable. it also randomly reboots itself.
i want to get this phone back working again. ideally i'd like the generic / unbranded 2.2 software on it but if i can even just get it back to the o2 ireland 2.1 then i'll be happy with that.
can anyone please help me out? please let me know what other information you might need.
this is the error that keeps popping up
Sorry!
Process system is not responding.
| Force close | Wait |
Click to expand...
Click to collapse
when i hold down the volume down button when booting i get this info too if this helps any
bravo pvt1 ship s-on
hboot-0.80.0000
microp-031d
touch panel-synt0101
radio-4.06.00.02_2
mar 29 2010, 21:34:33
Click to expand...
Click to collapse
I am not quite an expert since I'm still learning, but I would recommend you searching for the goldcard method and then aplying the latest WWE (World Wide English) RUU, you will find a topic with al the RUU's in Development sub forum. Once you get your phone working you can run the OTA updates to get to the latest version.
Hope my answer is helpfull
[Resolved] [Q] reboots during nav & return to factory state for repair - how do i ?
Android version 2.2
Baseband 32.47.00.32U_5.10.05.23
Kernel 2.6.32.15-gf5a401c
Build 2.29.405.2 CL263770 release-keys
Software: DJ Droid v1.8 (but also tried latest MoDaco, Pinky, CM6 and LeeDroid)
Browser: WebKit 3.1
HBOOT 0.93.0001
BRAVO PVT3 SHIP S-OFF
MICROP-051d
TOUCH PANEL-SYNW0101
Clockwork Recovery v2.5.0.7
Phone reboots after 20-30 minutes of navigation with GPS (either in car charge or out walking no charge).
Tried several latest HTC Desire ROMS - still reboots. Battery end is very hot.
Contacted HTC and they may need the phone.
How do I reset and reinstate the phone to complete as-shipped factory condition. The phone is on Orange but not branded so I assume a stock HTC ROM? Orginally came with 2.1 and I updated OTA to 2.2. After that I learnt some more and rooted, hacked, unprotected(S-OFF) and all sorts. Now I cant remember what I've done and thus what to reverse.
Thanks in advance guys.
Closing this thread.
As I'm learning more, I have posted more detailed specific questions on the forum.
The phone belonged to a HTC programmer, and he's given it to me to look at, (i do phone repairs). I do own an XTC clip if that helps at all.
BRAVO PVT3 SHIP S-ON
HBOOT-0.93.0001
RADIO-5.09.05.38-2
BASEBAND VERSION: 32.44.00.32U_5.09.05.30_2
KERNEL VERSION: [email protected]#1
ROM IMAGE VERSION: 2.10.405.2
ANDROID VERSION: 2.3.3
MOD VERSION: cyanogenmod-7.0.0-DESIRE
BUILD: GRI40
CLOCKWORKMOD RECOVERY v2.5.0.7
gets error while searching for networks...
no signal on three UK (original network)
tried to reflash with...
RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed
i get ERROR[131]:CUSTOMER ID ERROR
Tried to flash with
RUU_Bravo_H3G_UK_1.20.771.3_Radio_32.36.00.28U_4.06.00.02_2_release_124822
i get ERROR[140]:BOOTLOADER VERSION ERROR
I am truly stumped as to where to go from here, i was going to attempt to take the phone back to stock software to see if that rectified the issue, but my attempts seem to be in vain. any and all help would be most appreciated.
Create a GoldCard, then you can flash the WWE RUU (since it is a branded device).
The Second RUU is too old, no wonder it won't flash.
RADIO-5.09.05.38-2
Click to expand...
Click to collapse
Radio is too old, try to update it to newer one (requires S-OFF).
Please help me fix it. The sd-card cannot be read, can't be recognized on my pc, Bluetooth doesn't work and sim is out of service.
Have you looked at the TroubleShooting guide, here:
http://forum.xda-developers.com/showthread.php?t=1275632
?
I'm too new at this, and won't be able to help, but you'll need to provide some more detail to get any assistance here, I think. Stuff like software and hardware versions, ROM, what you did to it to get it into the state it's in, how it behaves, etc.
Russell
I was backing up my ROM and the ClockWorkRecovery froze and only have an image showing a blurred out picture of the ClockworkRecovery picture so I pulled out my batteries. I tried to turn on my phone but it didn't work so i did a RUU and got me to s-on and unrooted. There was a high possibly that I was USB bricked before I did a Ruu.
Android Version 2.2
Baseband Verion
2.6.32.15-gf5a401c
[email protected]#1
Build Number
2.29.405.5 CL293415 release-keys
Software Number
2.29.405.5
Brower Version
Web Kit 3.1
Bravo EVT SHIP S-ON
HBOOT-0.93.0001
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-5.11.05.27
http://forum.xda-developers.com/showthread.php?t=1143252
this should help to solve it
Don't you need S-OFF to run those commands because it doesn't work for me
Actually never mind it did work thank you very much!