I recently cracked the screen on my i9250 and am trying to come up with a way to sync a bluetooth keyboard etc and then use an MHL cable and just use it as an adhoc googletv. I've since picked up an S3 so I dont need to repair it. I was thinking the easiest way would be to use a usb hub with MHL and USB mouse but I've read that it wont work. Any ideas?
Hi guys,
My galaxy nexus screen has been cracked and it does not respond in 75% of the screen.
I bought a MHL to HDMI convertor on amazon and luckily got the phone UI to show up on my TV
Now since the touchscreen won't work , I need to connect a keyboard or mouse via USB OTG and use it for navigation.
Problem is the Galaxy Nexus has only a single microUSB/MHL port combined into one.
I have no idea how to split the output from the phone to connect to a USB OTG cable and MHL to HDMI adapter simultaneously !
Any help will be appreciated,
The phone is not rooted AFAIK , but may be I'm not sure. It was running Android 4.1 JellyBean when I dropped it on the floor
The phone does show up on my Windows PC and I have copied the photos off it. But I still want to copy contacts and SMS messages.
You tried just using something like Android Screencast from the PC (USB debugging is needed)
Also, some MHL adapters have a USB port in them, for power. Have you tried getting a crude micro USB splitter? Like this one? http://www.replacebase.co.uk/micro-usb-female-to-2-x-micro-usb-male-splitter-2392-p.asp#.URk59JGYOBs
Not guaranteed that would work though. Also, a quick google of what you want brings up some others with the same issue, have you tried to see if any of them have succeeded?
Quinny899 said:
You tried just using something like Android Screencast from the PC (USB debugging is needed)
Also, some MHL adapters have a USB port in them, for power. Have you tried getting a crude micro USB splitter? Like this one? http://www.replacebase.co.uk/micro-usb-female-to-2-x-micro-usb-male-splitter-2392-p.asp#.URk59JGYOBs
Not guaranteed that would work though. Also, a quick google of what you want brings up some others with the same issue, have you tried to see if any of them have succeeded?
Click to expand...
Click to collapse
Good news
I had a spare galaxy nexus in the office and I gently took the screws of both the devices , and just swapped the displays so that I could quickly turn on usb debugging , backup essential stuff and also turn on bluetooth.
Thanks to some assembly videos on youtube ! will share some pics soon
Hello all!
Here's the situation: I dropped my phone yesterday (Samsung Galaxy Nexus - i515) and the screen is destroyed. I can still see the top left corner (maybe 1/4 of the screen), but the digitizer is also hosed and I have a pattern lock. I need to get the data off the phone. When I connect it to my computer, it shows up as an external drive, but there is no file structure. From what I've read... I apparently have to unlock my phone before I can see the files, which as I said before is not possible right now.
Bootloader is locked, not rooted and the best part... USB Debugging is disabled. I've read through tons of information, but most threads either fade away when they get almost to a solution, or they are never fully answered.
I got the Unified Android Toolkit (GNEX V12.1.1.) by SKIPSOFT (which is amazing btw), but since good ole' USB Debugging isn't enabled, I can't use adb commands. I've read you can install a custom recovery and use adb at that point, but my bootloader is locked and I don't want to wipe data to unlock it.
I can get into fastboot, the driver shows up in device manager, serial shows up under 'fastboot devices', etc. but it looks like the only thing I can really do at that point requires a data wipe. I hit recovery (which is stock), the screen goes blank for a few minutes and then boots as normal. I'm guessing I can't use adb with the stock recovery??
I believe my final option here is to use a USB otg cable and use a USB mouse (wired only here? can I use a USB dongle? can I even unlock a pattern lock with a mouse?) to navigate until I can get USB debugging enabled. Since I can see a bit of the screen, I don't think it should be too hard. Even if it does prove too difficult trying to do it blind, there appears to be plenty of small apps that give you the capability to view what's on your phone via your PC. I was initially trying to find something that I could control phone from PC (screencast appears to be the best I've found so far), but without USB Debugging enabled or root, it's a no go.
I would like to hear from some of the smart folks out there about my options. I used to mess around with custom ROMs and all that good stuff, but it's been a few years so I am a little rusty.
TL;DR
Phone: Samsung Galaxy Nexus (i515) - broken screen and digitizer
Bootloader - Locked
Root - No
USB Debugging - Disabled
Phone has pattern lock
What is the best option to get my data backed up/copied?
Thanks in advance for any advice you can share!
buddy008 said:
Hello all!
Here's the situation: I dropped my phone yesterday (Samsung Galaxy Nexus - i515) and the screen is destroyed. I can still see the top left corner (maybe 1/4 of the screen), but the digitizer is also hosed and I have a pattern lock. I need to get the data off the phone. When I connect it to my computer, it shows up as an external drive, but there is no file structure. From what I've read... I apparently have to unlock my phone before I can see the files, which as I said before is not possible right now.
Bootloader is locked, not rooted and the best part... USB Debugging is disabled. I've read through tons of information, but most threads either fade away when they get almost to a solution, or they are never fully answered.
I got the Unified Android Toolkit (GNEX V12.1.1.) by SKIPSOFT (which is amazing btw), but since good ole' USB Debugging isn't enabled, I can't use adb commands. I've read you can install a custom recovery and use adb at that point, but my bootloader is locked and I don't want to wipe data to unlock it.
I can get into fastboot, the driver shows up in device manager, serial shows up under 'fastboot devices', etc. but it looks like the only thing I can really do at that point requires a data wipe. I hit recovery (which is stock), the screen goes blank for a few minutes and then boots as normal. I'm guessing I can't use adb with the stock recovery??
I believe my final option here is to use a USB otg cable and use a USB mouse (wired only here? can I use a USB dongle? can I even unlock a pattern lock with a mouse?) to navigate until I can get USB debugging enabled. Since I can see a bit of the screen, I don't think it should be too hard. Even if it does prove too difficult trying to do it blind, there appears to be plenty of small apps that give you the capability to view what's on your phone via your PC. I was initially trying to find something that I could control phone from PC (screencast appears to be the best I've found so far), but without USB Debugging enabled or root, it's a no go.
I would like to hear from some of the smart folks out there about my options. I used to mess around with custom ROMs and all that good stuff, but it's been a few years so I am a little rusty.
TL;DR
Phone: Samsung Galaxy Nexus (i515) - broken screen and digitizer
Bootloader - Locked
Root - No
USB Debugging - Disabled
Phone has pattern lock
What is the best option to get my data backed up/copied?
Thanks in advance for any advice you can share!
Click to expand...
Click to collapse
Unfortunately without ADB I do not know of any way to retrieve your data, or even clear the pattern lock. I think the easiest route would be to try a corded usb mouse and an otg adapter. You could try a cordless mouse with dongle, as long as it is not Bluetooth as that would most likely require a pairing code, but a standard 2.4GHz wireless mouse may work.
Hakugin said:
Unfortunately without ADB I do not know of any way to retrieve your data, or even clear the pattern lock. I think the easiest route would be to try a corded usb mouse and an otg adapter. You could try a cordless mouse with dongle, as long as it is not Bluetooth as that would most likely require a pairing code, but a standard 2.4GHz wireless mouse may work.
Click to expand...
Click to collapse
Thanks Hakugin.
I wanted to give an update. The USB OTG thing definitely works on the phone, but without being able to see the screen, unlocking the pattern would be extremely difficult. I tried for a little while, but there was just no way of knowing if I was even close.
I ended up getting a new phone via insurance. I took both phones apart and plugged the screen on the new phone into the old phone's motherboard. I was able to get into the phone, disable the pattern lock, enable USB debugging, and everything else I needed to do.
I know it's not the greatest and most available solution, but it definitely allowed me to get where I needed to be. I used MyPhoneExplorer (I think that's what it's called) to backup call logs, texts, etc and then restored to the new phone (once I had them both back together of course).
The USB Debugging is the biggest hurdle to overcome. If someone can find a good answer to solving that problem, we'd be ok. Of course, that would be a huge security issue...
Hi All,
My note 2 was fine and working with no serious issues until it fell from my pocket and the screen wouldn't show anything anymore. I took it to a repair shop and they said that the screen broke from the inside of the phone and that fixing it will cost a lot :crying:. My problem is that the phone has a pin lock but I can't interact with it to unlock it as the screen is pitch black and the touch doesn't work anymore. I need to backup my files but everywhere I looked seemed to have a solution for either rooted phones or phones with USB debugging being on and I have neither. Is there any way I can root or enable USB debugging with just my pc? or even unlock the pin code to access my files from the pc?
I've been looking for a solution for days now but with no luck . I hope there's hope. I'll appreciate any solution you guys might bless me with. Also, I just recently joined XDA so please excuse me if my question was placed in the wrong section
It will be quite cumbersome but you could buy an MHL adapter to get picture to HDMI and use an USB OTG cable for a keyboard and/or mouse and switch between them. This way you could enter the PIN code by a keyboard and install some apps to access it or as you said you could enable USB debugging and do stuff on your PC via ADB.
Hi, the wife dropped her 7T today, and now can't get into it. Part of the screen is viewable, and it responds to touch well enough to swipe up and get where you enter the PIN, but we can't actually enter the PIN, and it won't read her fingerprint, either. It also doesn't appear to respond to mouse movements or clicks on USB OTG. The phone is bootloader unlocked and rooted, and I think it must have had USB debugging turned on at some point, but now when I try to connect with "adb devices", it shows as "unauthorized".
Can anyone recommend a method for unlocking it so I can get her data transferred to a PC or possibly directly to her replacement phone (she's trying an Apple SE)? Then we can be done with it, as it's not apparently worth the cost to repair it.
I managed to get the device connected to our TV with a USB v3 hub, and was able to remove the PIN and change the other settings I needed to change so I could get into it. USB OTG connection was useful for part of the process as I was able to connect a keyboard and mouse to it, but I couldn't seem to set it up so that I could use external input devices AND mirror the screen at the same time. Frustrating. At least the data is accessible now.
mobilesentrix---com