Related
Hi! I'm new to this forum so I hope there will be some understanding for the urgency.
Here's the deal; I dropped my HTC Desire in the toilet, clumsy me. I managed to grab it within a few seconds and so I removed all parts and let them dry over a towel. Stupidly enough, I tried to reboot the phone after some time, not thinking that electricity and water does not mix too well. I dried the cell phone with a vacuum cleaner for about 5 minutes and placed it in a bowl of rice. Just recently, I tried to start the phone with the charger plugged in but it won't work this time either. The phone keeps vibrating and vibrating until I remove the battery - what should I do?
Any help is appreciated!
Difeddy said:
Hi! I'm new to this forum so I hope there will be some understanding for the urgency.
Here's the deal; I dropped my HTC Desire in the toilet, clumsy me. I managed to grab it within a few seconds and so I removed all parts and let them dry over a towel. Stupidly enough, I tried to reboot the phone after some time, not thinking that electricity and water does not mix too well. I dried the cell phone with a vacuum cleaner for about 5 minutes and placed it in a bowl of rice. Just recently, I tried to start the phone with the charger plugged in but it won't work this time either. The phone keeps vibrating and vibrating until I remove the battery - what should I do?
Any help is appreciated!
Click to expand...
Click to collapse
the fact its vibrating must be a good sign, atleast it means you didnt fry the whole thing when u tried to switch it on wet, the best i can recomend is put it back in a air tight container filled with rice, make sure the desire is totaly submerged in the rice and leave it for 24 hrs+ , if it wont switch on after that, then its a repair job
AndroHero said:
the fact its vibrating must be a good sign, atleast it means you didnt fry the whole thing when u tried to switch it on wet, the best i can recomend is put it back in a air tight container filled with rice, make sure the desire is totaly submerged in the rice and leave it for 24 hrs+ , if it wont switch on after that, then its a repair job
Click to expand...
Click to collapse
Have to agree; at least it's giving some sort of sign! Problem is that it won't stop vibrating and the screen remains black - no lights, etc. I suppose I'll have to give it a try and see what follows. My parents wouldn't be too happy with me explaining the circumstances... Lesson learned.
Thanks for your help!
AndroHero said:
the fact its vibrating must be a good sign, atleast it means you didnt fry the whole thing when u tried to switch it on wet, the best i can recomend is put it back in a air tight container filled with rice, make sure the desire is totaly submerged in the rice and leave it for 24 hrs+ , if it wont switch on after that, then its a repair job
Click to expand...
Click to collapse
and if it is a repair job, have fun
http://tjworld.net/blog/htc-desire-tear-down
http://forum.xda-developers.com/showthread.php?t=720717&highlight=teardown
I used both guides to fix my broken AMOLED.. good luck!
hope this helps! and hope your Desire isnt broken!
!PANDA said:
and if it is a repair job, have fun
I used both guides to fix my broken AMOLED.. good luck!
hope this helps! and hope your Desire isnt broken!
Click to expand...
Click to collapse
Thanks for the reply! Are you quite sure if it's worth the risk, though?
-----------
F*ck. I placed the cell phone in a box of rice and let it stay for about 20 hours, but it won't start at all now after a few attempts. No vibration at all. I'm starting to think that I'm screwed.
YES!!!
It booted up now! The power button doesn't appear to work properly, but it will start!
Difeddy said:
YES!!!
It booted up now! The power button doesn't appear to work properly, but it will start!
Click to expand...
Click to collapse
well thats a start, give it a few more days in a bowl of rice and if that wont help (to make sure everything work!) hopefully it will! but yu know.. if you have no insurance and have no choice, get a compressed air spray and have fun
!PANDA said:
well thats a start, give it a few more days in a bowl of rice and if that wont help (to make sure everything work!) hopefully it will! but yu know.. if you have no insurance and have no choice, get a compressed air spray and have fun
Click to expand...
Click to collapse
The power button isn't working now either. Will check if the warranty covers this, I'm just hoping that there will be no indications of water damage.
Difeddy said:
The power button isn't working now either. Will check if the warranty covers this, I'm just hoping that there will be no indications of water damage.
Click to expand...
Click to collapse
There are usually little white stickers inside the phone which turn red if they get wet, so my guess is you've got little hope trying to get a warranty repair.
Regards,
Dave
foxmeister said:
There are usually little white stickers inside the phone which turn red if they get wet, so my guess is you've got little hope trying to get a warranty repair.
Regards,
Dave
Click to expand...
Click to collapse
Well, there is a sticker near the battery slot on the phone and another one on the battery itself. Both of them are white, luckily enough. We'll see what the guy says, thanks for the help though!
Hello!
Got any luck with a service with power button?
I have the same issue. Phone fell into water.. after few days phone works fine, except power button.
HTC Service refuses to make a guarantee repairment (suprisingly - liquid damage).
I think, in my case power button is short-circuited: when inserting the battery, phone is turning on and starting up w/o any problems (normally, Desire doesn't do that, I've tested friend's phone).
Unfortunately, get the root and remap sleep button to optical trackball isn't an option for me...
Someone advised me to disassemble the phone, and try to clean the power button with an alcohol. But I didn't tried this yet...
AE777 said:
Hello!
Got any luck with a service with power button?
I have the same issue. Phone fell into water.. after few days phone works fine, except power button.
HTC Service refuses to make a guarantee repairment (suprisingly - liquid damage).
I think, in my case power button is short-circuited: when inserting the battery, phone is turning on and starting up w/o any problems (normally, Desire doesn't do that, I've tested friend's phone).
Unfortunately, get the root and remap sleep button to optical trackball isn't an option for me...
Someone advised me to disassemble the phone, and try to clean the power button with an alcohol. But I didn't tried this yet...
Click to expand...
Click to collapse
I'm a bit late, I suppose.
We sent the phone for a repair job but it was "quickly" sent back to me. Good of them to say this a month later, when I was eagerly waiting for them to send it back, whole and functional. Anyhow, I got it back and fortunately; it worked. There were no issues, what-so-ever, with the goddamn power button.
But, ironically enough, I managed to trip into a lake yesterday. What goes around comes around. At least I wasn't browsing for some porn this time. Jokes aside, the power button doesn't seem to be working anymore. Sometimes it'll respond when I boot the phone up, but now it doesn't seem to do this anymore.
Disconnect motor
Disassemble the phone and disconnect contact on vibration motor? Or remove motor and reassemble phone. Worth a try to get a functioning phone minus vibration option. :fingers-crossed:
Hey can know how much the company charge for d repair ????
Ok my one and a half year old son got a hold of my Epic Touch and I dont know for how long he had it in the toilet.I knew this day would come but I was hoping for it to be my girlfriend's original Epic,lol.
So I took it apart,dryed it real good with paper towel first,then with air and baked it in oven for a minute or two.
I put it back together and it works!Its amazing because after my son diped it in water it layed wet for about twenty minutes before I found it.
I have one question for those that have more knowledge about Epic's internals:
Everything works except the POWER BUTTON!Yes I can use the power button one time to turn on the phone but after that it doesnt work anymore.
I cant turn off the phone,bring up the shutdown/airplane mode menu or anything else,in order to turn off the phone I need to pull battery.
Yes I took it apart again cleaned everything with rubbin alcohol inside and still same problem,any ideas?
Thanks in advance.
Oh,is there any apps out there that can map power button to search or home buttons?
lviv73 said:
Ok my one and a half year old son got a hold of my Epic Touch and I dont know for how long he had it in the toilet.I knew this day would come but I was hoping for it to be my girlfriend's original Epic,lol.
So I took it apart,dryed it real good with paper towel first,then with air and baked it in oven for a minute or two.
I put it back together and it works!Its amazing because after my son diped it in water it layed wet for about twenty minutes before I found it.
I have one question for those that have more knowledge about Epic's internals:
Everything works except the POWER BUTTON!Yes I can use the power button one time to turn on the phone but after that it doesnt work anymore.
I cant turn off the phone,bring up the shutdown/airplane mode menu or anything else,in order to turn off the phone I need to pull battery.
Yes I took it apart again cleaned everything with rubbin alcohol inside and still same problem,any ideas?
Thanks in advance.
Oh,is there any apps out there that can map power button to search or home buttons?
Click to expand...
Click to collapse
Maybe umm quickboot plus from the market can do it. Only $2
Sent from my SPH-D710 using Tapatalk 2
Do not power it back on.. Put it in a sealed bowl and fill it with rice. Leave it there for at least 24hrs. Even longer if you want the best result. It takes water damage a couple of weeks to really rear its ugly head. Sofar rice seems to be the best bet.
Good luck.. Report back to help out others with this same prob.
Definitely try the rice trick... I would recommend doing that before baking your motherboard in the oven.
The only time I've ever heard of baking any electronic device in the oven is for the Xbox 360...
Sent from my SPH-D710 using xda premium
Indrid Cole said:
Do not power it back on.. Put it in a sealed bowl and fill it with rice. Leave it there for at least 24hrs. Even longer if you want the best result. It takes water damage a couple of weeks to really rear its ugly head. Sofar rice seems to be the best bet.
Good luck.. Report back to help out others with this same prob.
Click to expand...
Click to collapse
I already took it apart and dried it,plus put it in oven.I would say that there is no need for rice now,rice is for those that want to dry inside without talkn the phone apart.Everything works but the power button which is really strange.
Mattix724 said:
Definitely try the rice trick... I would recommend doing that before baking your motherboard in the oven.
The only time I've ever heard of baking any electronic device in the oven is for the Xbox 360...
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I just did that to make sure any remaing moisture was gone.Still no answer why I cant use the power button except to turn on the phone.
Are you on a custom ROM? if so, maybe its the ROM bugging out, not the phone. Just a wild guess.
Do the RICE deal as mentioned above it WORKS on all sorts of electronics!
Chew DZ said:
Are you on a custom ROM? if so, maybe its the ROM bugging out, not the phone. Just a wild guess.
Click to expand...
Click to collapse
Im starting to think that too,im gonna try reflashing and see what happens.Power button does work to turn the phone on but after this it doesn't.
I just don't want to reflash because i been running Blazer 4.0 for 3 months now(the longest i ever went without flashing,lol) and i added all types of custom apk"s to that rom.I would usually extract apk files from this rom and pit them in the new one but i odexed it,so no it looks like im going to have to make a whole new rom and that's a day gone.
He has already gone far and above the rice trick. That would be repetitive and unnecessary.
Also, rubbing alcohol is not a good solution. It leaves a film on the metal that is highly corrosive. You need denatured alcohol.
The power button has a two step contact. That button most likely needs to be replaced. You can order cheap on a wholesale parts website.
Sent from my SPH-D710 using Tapatalk 2
azyouthinkeyeiz said:
He has already gone far and above the rice trick. That would be repetitive and unnecessary.
Also, rubbing alcohol is not a good solution. It leaves a film on the metal that is highly corrosive. You need denatured alcohol.
The power button has a two step contact. That button most likely needs to be replaced. You can order cheap on a wholesale parts website.
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
Finally someone understands it.I don't think power button needs replacement because i use the power button to turn on the phone,lol.But after that power button doesn't work.The power button only works one time-to turn on the phone but that's it,so its not the button that's defective.Its gotta be software related or one of the chips that controls power button after the phone is on is fried.
I didnt kno the e4gt was out that long lol.. Either way anything could be going on.. It was dropped in water lol
Sent from my SPH-D710 using XDA
Try button remapper to resolve the power button ordeal. I personally would ditch the search button and use that as the new power button.
Sent from my SPH-D710 using xda premium
The likely reason its not functioning after you power on is a short somewhere created by the liquid. When powered off the short is not affecting but once on it disables the button. I dont think you can replace that button unless you've got some decent soldering skills and you cant really be sure that even that would fix it. Liquid is one of those wildcards when it comes to electronics. You dont know if your screwed from jump or if the liquid might rear its ugly head later... too unpredictable.
d12unk13astard said:
Try button remapper to resolve the power button ordeal. I personally would ditch the search button and use that as the new power button.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Just what i was thinking,what is the button remapper app called?
blackhawksnip3r said:
The likely reason its not functioning after you power on is a short somewhere created by the liquid. When powered off the short is not affecting but once on it disables the button. I dont think you can replace that button unless you've got some decent soldering skills and you cant really be sure that even that would fix it. Liquid is one of those wildcards when it comes to electronics. You dont know if your screwed from jump or if the liquid might rear its ugly head later... too unpredictable.
Click to expand...
Click to collapse
I already thought of that,i was thinking if i run the phone for a while and internals get warm that this little drop of water will evaporate(if that's what it is because i heated in in the oven pretty good,i couldn't even touch it),i will have to see after few days of usage.
i thought the one problem... would be it smelled like ****. :good:
lviv73 said:
I already thought of that,i was thinking if i run the phone for a while and internals get warm that this little drop of water will evaporate(if that's what it is because i heated in in the oven pretty good,i couldn't even touch it),i will have to see after few days of usage.
Click to expand...
Click to collapse
Lol the water emits an electrical shock when put in water which can damage any part of the phone.. Heating it up in a microwave is only resoldering the phone.. Wont fix an electrical shock that could have damaged a chip or a hardware button a led etc.. What would happen if you had a pc plugged in and dropped it in water while it was on? Just throw it in the microwave and itd be fine?
Sent from my SPH-D710 using XDA
elliwigy said:
Lol the water emits an electrical shock when put in water which can damage any part of the phone.. Heating it up in a microwave is only resoldering the phone.. Wont fix an electrical shock that could have damaged a chip or a hardware button a led etc.. What would happen if you had a pc plugged in and dropped it in water while it was on? Just throw it in the microwave and itd be fine?
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
Lol,microwave?Who said anything about microwave?Im talking about regular oven,microwave will fry everything in few seconds.
Damn it,now its serious,phone wont go into Download Mode.When i try to put it in download mode i push "up" key for "Yes" and it flashes for about one second download mode,well not exactly it flashes this:
ODIN MODE(in red letters)
Product Name:SPH-700
Custom Binary Download:NO
Current Binary:Samsung Official
Downloading do not turn off target
It flashes that for about one second then it starts to boot into android.Another thing that i noticed is when i power on the phone i get Samsung Galaxy S2 logo then it disappears then the phone reboots and i get Samsung Galaxy S2 logo second time and then it boots into android.
So it boots after second galaxy s logo.I can still boot into CWM though that's only good thing.
Has anyone encountered similar phenomenon before?
Hello people,
I was hoping somebody could help me, my phone got wet(stupid i know) and shut down because of the water.
I pulled the battery and put my phone in rice for a day, at first it wouldnt boot and kept refreshing the google logo, after awhile it started to boot normally (and work normally) except booting which took 2 or 3 google refreshes before it started bootanimation, and with the charger plugged in it took more(like 5).
Im not sure what is happening with booting, may be related to my next problem, the camera stopped working.
when i start up camera all i get is a black screen and my navbar buttons, no shutter button, no error or w/e just nothing. sometimes not even all the navbars show up.
Other then that the phone is working normal so i dont know if it is a soft- or hardware problem.
Does anybody know what is going on?
Id like to pull a logcat but it isnt working for me, says adb isnt a internal or external command after installing all the sdk tools etc.
It's likely that your camera module broke.
Lesicnik1 said:
It's likely that your camera module broke.
Click to expand...
Click to collapse
Thx for input, if so, can i replace it?
Afwasmassi said:
my phone got wet(stupid i know) and shut down because of the water.
<snip>
Other then that the phone is working normal so i dont know if it is a soft- or hardware problem.
Click to expand...
Click to collapse
I'd say chances are it's a hardware problem.
Afwasmassi said:
Thx for input, if so, can i replace it?
Click to expand...
Click to collapse
Well you can replace it yourself, but assuming that you've never done disassembling and stuff, I don't recommend you doing it...
Lesicnik1 said:
It's likely that your camera module broke.
Click to expand...
Click to collapse
kyokeun1234 said:
Well you can replace it yourself, but assuming that you've never done disassembling and stuff, I don't recommend you doing it...
Click to expand...
Click to collapse
I get your point, i was thinking more along the lines of getting it repaced..
maybe warranty? I looked for a water damage sticker and i couldnt find a single one, can sb tell me where it is supposed to be?
Afwasmassi said:
I get your point, i was thinking more along the lines of getting it repaced..
maybe warranty? I looked for a water damage sticker and i couldnt find a single one, can sb tell me where it is supposed to be?
Click to expand...
Click to collapse
You gotta pay Samsung to do it. Warranty doesn't cover that. If you're lucky, you can probably fix it from third party repair shop for a cheaper price
Swyped on my Galaxy Nexus running AOKP with Franco Kernel, overclocked to 1.4GHz
kyokeun1234 said:
You gotta pay Samsung to do it. Warranty doesn't cover that. If you're lucky, you can probably fix it from third party repair shop for a cheaper price
Swyped on my Galaxy Nexus running AOKP with Franco Kernel, overclocked to 1.4GHz
Click to expand...
Click to collapse
How do you mean, it cant pass as a fault from samsung itself? Like 'the camera stopped working'
Afwasmassi said:
How do you mean, it cant pass as a fault from samsung itself? Like 'the camera stopped working'
Click to expand...
Click to collapse
You mean, stone cold lying to cover up your own mistake and let somebody else pay for it?
Afwasmassi said:
How do you mean, it cant pass as a fault from samsung itself? Like 'the camera stopped working'
Click to expand...
Click to collapse
Well it's your fault, right? Plus, they'll know that something caused camera to stop working once they crack or open
Swyped on my Galaxy Nexus running AOKP with Franco Kernel, overclocked to 1.4GHz
Afwasmassi said:
Hello people,
I was hoping somebody could help me, my phone got wet(stupid i know) and shut down because of the water.
I pulled the battery and put my phone in rice for a day, at first it wouldnt boot and kept refreshing the google logo, after awhile it started to boot normally (and work normally) except booting which took 2 or 3 google refreshes before it started bootanimation, and with the charger plugged in it took more(like 5).
Im not sure what is happening with booting, may be related to my next problem, the camera stopped working.
when i start up camera all i get is a black screen and my navbar buttons, no shutter button, no error or w/e just nothing. sometimes not even all the navbars show up.
Other then that the phone is working normal so i dont know if it is a soft- or hardware problem.
Does anybody know what is going on?
Id like to pull a logcat but it isnt working for me, says adb isnt a internal or external command after installing all the sdk tools etc.
Click to expand...
Click to collapse
Man me too, i was out running with my phone yesterday (use my phone for GPS and music while running), 2 miles into my run and it started POURING! my phone got pretty wet pretty fast. I pulled the battery, wrapped it up in my shirt and ran that fastest 2 miles of my life back to my truck to get my nexus somewhere dry... its been sitting in rice since yesterday afternoon.... im scared to power back up
kyokeun1234 said:
Well it's your fault, right? Plus, they'll know that something caused camera to stop working once they crack or open
Swyped on my Galaxy Nexus running AOKP with Franco Kernel, overclocked to 1.4GHz
Click to expand...
Click to collapse
thx for your input, i will take it to a local phone shop to see if they can get it fixed.
Kinda regret not getting insurance for it though.
Last question, would the broken camera module be the cause of the bootloopish behaviour?
codya321 said:
Man me too, i was out running with my phone yesterday (use my phone for GPS and music while running), 2 miles into my run and it started POURING! my phone got pretty wet pretty fast. I pulled the battery, wrapped it up in my shirt and ran that fastest 2 miles of my life back to my truck to get my nexus somewhere dry... its been sitting in rice since yesterday afternoon.... im scared to power back up
Click to expand...
Click to collapse
Know that feel bro. i was scared ****less. but still the camera broke.
Any update on this?
I have EXACTLY the same situation with a little more info. Seems weird that the same components die in the same manner with water damage. Some traces too close together?
My phone wasn't actually soaked, just very humid. Was in my jacket pocket while running in a downpour. Jacket is completely waterproof, unfortunately it wicks a lot of water off me and the goddamn pocket is made of the same breathable wicking material. Time I realised what had happened, there was a lot of moisture in the pocket. Phone still working but .....
Flash modules no longer works. This is why the camera app fails to start. There's no error in logcat aside from the application taking too long to respond. Will dig a bit deeper here shortly, but I just found it odd that the phone is so susceptible to moisture in one specific piece of hardware. I know this isn't a ... catastrophic design flaw but it IS something any good electronics manufacturer should note and take into consideration. If a bit of moisture causes this failure reproducibly, it should be considered a design flaw, and addressed as such.
Back to the OP though. Did your phone ever miraculously start working?
Could you test if your flash module works (install a flashlight app and turn on...)?
codya321 said:
Man me too, i was out running with my phone yesterday (use my phone for GPS and music while running), 2 miles into my run and it started POURING! my phone got pretty wet pretty fast. I pulled the battery, wrapped it up in my shirt and ran that fastest 2 miles of my life back to my truck to get my nexus somewhere dry... its been sitting in rice since yesterday afternoon.... im scared to power back up
Click to expand...
Click to collapse
Leave it on the rice a couple more days. And in between try to replace rice with new one. I have read in this forums number of times people who have successfully dried out their phone waited longer, that is several days in rice.
Sent from my Galaxy Nexus using Tapatalk 2
I had an ogdroid take a swim in a Pool (i was pushed in). I left the phone & battery fully submerged in a bowl of rice for 2 weeks. I changed the rice out every to days. Reinserted battery and powered Up device and it when to bootloader. I sbf the phone....worked perfect as if it never went swimming.
The longer that you can leave it....the better. Oh and replace the water detection stickers. You can buy them just about anywhere on the net.
Sent from my Galaxy Nexus
Hey.. I flashed cm12 unofficial ROM 2-3 months ago on my lg d855.. There weren't any major bugs.. But recently I noticed that sometimes when I press the power button to unlock it .. The touch screen seems to stop working.. This happens only on the lock screen... I Also tried holding the power button and try to tap the "power off / reboot" buttons.. It doesn't work too.. But.. The weird part is..when I sort of slap the screen it starts to work again .. My question is .. Is it a ROM bug? Or is it a hardware issue.. If its a software issue.. Then why does it start working when I slap it.. And if its a hardware issue.. Why does it only occur on the lock screen? Please help.. Thanks
Sent from my LG-D855 using XDA Free mobile app
2000ftt said:
Hey.. I flashed cm12 unofficial ROM 2-3 months ago on my lg d855.. There weren't any major bugs.. But recently I noticed that sometimes when I press the power button to unlock it .. The touch screen seems to stop working.. This happens only on the lock screen... I Also tried holding the power button and try to tap the "power off / reboot" buttons.. It doesn't work too.. But.. The weird part is..when I sort of slap the screen it starts to work again .. My question is .. Is it a ROM bug? Or is it a hardware issue.. If its a software issue.. Then why does it start working when I slap it.. And if its a hardware issue.. Why does it only occur on the lock screen? Please help.. Thanks
Sent from my LG-D855 using XDA Free mobile app
Click to expand...
Click to collapse
Its not hardware issue for sure. Try to unlock with 3 fingers i think i saw this solution somewhere in the forum.
2000ftt said:
Hey.. I flashed cm12 unofficial ROM 2-3 months ago on my lg d855.. There weren't any major bugs.. But recently I noticed that sometimes when I press the power button to unlock it .. The touch screen seems to stop working.. This happens only on the lock screen... I Also tried holding the power button and try to tap the "power off / reboot" buttons.. It doesn't work too.. But.. The weird part is..when I sort of slap the screen it starts to work again .. My question is .. Is it a ROM bug? Or is it a hardware issue.. If its a software issue.. Then why does it start working when I slap it.. And if its a hardware issue.. Why does it only occur on the lock screen? Please help.. Thanks
Sent from my LG-D855 using XDA Free mobile app
Click to expand...
Click to collapse
I haven't had this problem on the D851, but I would try updating your device to the newest version of Cyanogenmod.
Also, back when I had the G2 I went through this problem a lot and actually had about five of them because they were under warranty. The problem was that the seal for the screen would come undone, and it's hard to notice since the screen is literally the entire front of the phone. When this seal broke, water would seep in and cause chaos with the screen. Wouldn't work in certain parts and so much more. I haven't had this happen on the G3, but my seal has broken and I can see it, so it's only a matter of time before water gets in there (or until I get the screen replaced). I've always had this problem with LGs they're just so damn good that I live with it. I'd bet this is what's going on if it's not the hardware.
ItsJacobee said:
I haven't had this problem on the D851, but I would try updating your device to the newest version of Cyanogenmod.
Also, back when I had the G2 I went through this problem a lot and actually had about five of them because they were under warranty. The problem was that the seal for the screen would come undone, and it's hard to notice since the screen is literally the entire front of the phone. When this seal broke, water would seep in and cause chaos with the screen. Wouldn't work in certain parts and so much more. I haven't had this happen on the G3, but my seal has broken and I can see it, so it's only a matter of time before water gets in there (or until I get the screen replaced). I've always had this problem with LGs they're just so damn good that I live with it. I'd bet this is what's going on if it's not the hardware.
Click to expand...
Click to collapse
Absolutely... I can see... Whenever I press on the edges on any of the sides.. It sort of gets pushed in.. It looks like its not glued properly.. Its a bummer as the "screen" is the reason y I bought this.. From ur experience , does it stop working completely at some point?
Sent from my LG-D855 using XDA Free mobile app
2000ftt said:
Absolutely... I can see... Whenever I press on the edges on any of the sides.. It sort of gets pushed in.. It looks like its not glued properly.. Its a bummer as the "screen" is the reason y I bought this.. From ur experience , does it stop working completely at some point?
Sent from my LG-D855 using XDA Free mobile app
Click to expand...
Click to collapse
If you can push it in then the seal is definitely broken.
On my G2, when in a moist and humid environment condensation would form on the inside of the device, but it was nothing too big and went away after a while. However, when too much fluid built up in the inside it began typing on its own. Furthermore, it got to the point where certain parts of the screen were unresponsive. This is why I had about five of them because over time it did get bad.
Although if there is water in the device rice usually absorbs it. Get a ziplock bag and fill it with rice. Take your battery, sim card, and sd card out, then place the phone in the bag full of rice. Seal it and shake it up a bit and let it sit over night. Keep the back cover off as well. If this is an option. I understand you might need your phone, but if you get a time where about eight hours are free I would highly recommend this. I have no idea how it works, but it takes the moisture out of the phone. I've done this with waterlogged phones, my G2, etc.
When I did that on the G2 it fixed my problems until moisture got back in there. I don't take care of my phones too well, so moisture got back in fast. Try this out and if it works just avoid keeping your phone in moist places (like playing music in shower, being on it while raining, etc.). If this fixes the problem it should hold you off until you can get the screen resealed or a new screen.
If it is with the hardware and its still under warranty I would get a replacement. I would revert to the stock ROM (if you made a backup) or find one and make sure it's updated. I would then do a full unroot, and attempt to make it so they cannot tell it was rooted. I would then attempt to get the replacement. Rooting voids the warranty, but if you unrooted I doubt they could tell. Furthermore, if you have insurance on the phone this could also work.
Edit: If you try the rice then try to replace the screen I would ensure that the current screen works properly after the rice. Make sure all the moisture is out before you replace the screen that way no moisture is trapped in there.
ItsJacobee said:
If you can push it in then the seal is definitely broken.
On my G2, when in a moist and humid environment condensation would form on the inside of the device, but it was nothing too big and went away after a while. However, when too much fluid built up in the inside it began typing on its own. Furthermore, it got to the point where certain parts of the screen were unresponsive. This is why I had about five of them because over time it did get bad.
Although if there is water in the device rice usually absorbs it. Get a ziplock bag and fill it with rice. Take your battery, sim card, and sd card out, then place the phone in the bag full of rice. Seal it and shake it up a bit and let it sit over night. Keep the back cover off as well. If this is an option. I understand you might need your phone, but if you get a time where about eight hours are free I would highly recommend this. I have no idea how it works, but it takes the moisture out of the phone. I've done this with waterlogged phones, my G2, etc.
When I did that on the G2 it fixed my problems until moisture got back in there. I don't take care of my phones too well, so moisture got back in fast. Try this out and if it works just avoid keeping your phone in moist places (like playing music in shower, being on it while raining, etc.). If this fixes the problem it should hold you off until you can get the screen resealed or a new screen.
If it is with the hardware and its still under warranty I would get a replacement. I would revert to the stock ROM (if you made a backup) or find one and make sure it's updated. I would then do a full unroot, and attempt to make it so they cannot tell it was rooted. I would then attempt to get the replacement. Rooting voids the warranty, but if you unrooted I doubt they could tell. Furthermore, if you have insurance on the phone this could also work.
Edit: If you try the rice then try to replace the screen I would ensure that the current screen works properly after the rice. Make sure all the moisture is out before you replace the screen that way no moisture is trapped in there.
Click to expand...
Click to collapse
First of all.. Thank you soo much.. Thank you for the time.u put into these posts.. It has really helped me.out a lot.. I can totally see how the rice method could work.. But it has not got to the point where its un-usable.. As I said, its only in the lock screen.. It has never ever occurred during actually using it.. I haven't found any dead spots.. Nothing.. If I use the rice trick to take out the moisture,, and if I can use the same screen (which should still work) can I just take it out and glue it in to place? What type of adhesive should be good... I'm asking this because I got this from abroad.. And it's not an international warranty. So there's no way I'm getting a warranty replacement .. So ive gotta make with what I have.. But this is very sad though, specially from such a big company.. I mean gluing a screen is not that hard.. I played loads.. Lol.. I really hope hot glue works lol..
Sent from my LG-D855 using XDA Free mobile app
2000ftt said:
First of all.. Thank you soo much.. Thank you for the time.u put into these posts.. It has really helped me.out a lot.. I can totally see how the rice method could work.. But it has not got to the point where its un-usable.. As I said, its only in the lock screen.. It has never ever occurred during actually using it.. I haven't found any dead spots.. Nothing.. If I use the rice trick to take out the moisture,, and if I can use the same screen (which should still work) can I just take it out and glue it in to place? What type of adhesive should be good... I'm asking this because I got this from abroad.. And it's not an international warranty. So there's no way I'm getting a warranty replacement .. So ive gotta make with what I have.. But this is very sad though, specially from such a big company.. I mean gluing a screen is not that hard.. I played loads.. Lol.. I really hope hot glue works lol..
Sent from my LG-D855 using XDA Free mobile app
Click to expand...
Click to collapse
Well then I'd try to fix it before it does get unstable! Thing with the lock screen is you're swiping and the moisture defuses the area you're touching which could cause problems. Definitely try the rice! However, I wouldn't recommend gluing it yourself. I imagine it requires some sort of water and heat resistant glue to be effective, and on top of that a professional application. Hot glue definitely won't work! I imagine you want something that looks nice and I can only seeing that being messy and leaving residue. Furthermore, I'm not entirely sure on what lies beneath the screen and if disturbing that could cause further problems. However, I understand you're probably planning on it so please watch a guide such as: https://www.youtube.com/watch?v=PcoEQVtUwYQ to see how it's done and what you need. There seems to be a lot more to it than just placing some glue on the screen and pressing it back down.
I'm sure you can get a replacement kit with instructions and all the required tools to do it properly for not too steep of a price. Check this out: http://www.ebay.com/itm/Replacement...46?pt=LH_DefaultDomain_15&hash=item54198f441a
Or you could take it to a professional like those at Broke Ass Phone: http://www.brokeassphone.com/smartphone-repair-selection/lg-smartphone-repair/lg-g3/ The price is steep, but it's professionally done and comes with a warranty.
Good luck to you!
ItsJacobee said:
I haven't had this problem on the D851, but I would try updating your device to the newest version of Cyanogenmod.
Also, back when I had the G2 I went through this problem a lot and actually had about five of them because they were under warranty. The problem was that the seal for the screen would come undone, and it's hard to notice since the screen is literally the entire front of the phone. When this seal broke, water would seep in and cause chaos with the screen. Wouldn't work in certain parts and so much more. I haven't had this happen on the G3, but my seal has broken and I can see it, so it's only a matter of time before water gets in there (or until I get the screen replaced). I've always had this problem with LGs they're just so damn good that I live with it. I'd bet this is what's going on if it's not the hardware.
Click to expand...
Click to collapse
Hi, ItsJacobee,
Sorry for breaking in, I have the same issue with 2000ftt, and I did tried "rice trick" but no luck. I think the screen is perfectly fitted in the case, when I press the edges, the feel is solid and no room for further pressing in.
My device is D855, I flashed many custom roms (resurrectionremix, CM12, Nameless ROM, CloudyG3 2.1), the mentioned issue happens to many of them but never happened in CloudyG3 & stock rom.
Any idea?
Best regards.
D855Lover said:
Hi, ItsJacobee,
Sorry for breaking in, I have the same issue with 2000ftt, and I did tried "rice trick" but no luck. I think the screen is perfectly fitted in the case, when I press the edges, the feel is solid and no room for further pressing in.
My device is D855, I flashed many custom roms (resurrectionremix, CM12, Nameless ROM, CloudyG3 2.1), the mentioned issue happens to many of them but never happened in CloudyG3 & stock rom.
Any idea?
Best regards.
Click to expand...
Click to collapse
Is it under warranty or do you have insurance on the phone?
ItsJacobee said:
Is it under warranty or do you have insurance on the phone?
Click to expand...
Click to collapse
Yes, it is under warranty, I am going to restore stock ROM and take it to service center. But I don't know how to trigger the issue (touch screen no response at lock screen while using power button to wake up), in stock rom and cloudyG3, this problem never happen.
Best regards,
D855 Lover.
D855Lover said:
Yes, it is under warranty, I am going to restore stock ROM and take it to service center. But I don't know how to trigger the issue (touch screen no response at lock screen while using power button to wake up), in stock rom and cloudyG3, this problem never happen.
Best regards,
D855 Lover.
Click to expand...
Click to collapse
Restore Stock ROM AND do a full unroot beforehand.
ItsJacobee said:
Restore Stock ROM AND do a full unroot beforehand.
Click to expand...
Click to collapse
Thanks for reminding. I restored the phone to stock with the downloaded .TOT file, then go to service center.
I can't trigger the problem in front of the service guy, however, they ask me to left the phone for checking, one day later, they confirmed that my phone is working fine no need to do anything, nothing to be replaced.
CM12 is already good enough, its speed and battery friendly....
I wish developers of CM12 would somehow fix the problem in future updates, as I knew some D855 user (but not much) also having the same issue.
Best regards,
D855Lover.
Hi long story short: Phone slip from my jacket into a ice cold water cooler and spend there at least 2 minutes.
I was able to disassemble and dry it up, did a trick with usb charging and replugging the battery at the same time of powering it up and I got it working again.
The display is soaked in water still no matter how much I try to dry it using a hair dryer. So I order a new one. + a new battery just in case this ones goes bad eventually.
Now my problem is that the usb is not being recognized while plugged on a computer.
Beside this I don't know what other hidden issues it might have.
How screw am I ?
How much mileage can I get out of this phone now?
Do you have any kind of corrosion on metal contact and/or phone motherboard? If so, the only way to fix corrosion is to clean it in ultrasound bath with chemicals.
you're not suppose to turn it on until it fully dried, too late for that
you should have left it in some rice for a few days
do it now and it might still be recoverable since it seems to still work, but don't get your hopes up
anonxlg said:
you're not suppose to turn it on until it fully dried, too late for that
you should have left it in some rice for a few days
do it now and it might still be recoverable since it seems to still work, but don't get your hopes up
Click to expand...
Click to collapse
it was still on when I took it off the cooler, I couldn't turn it off without using the power button and this is not a galaxy that I could remove the battery right away. I wasn't at my place and didn't have any tools with me.
The phone is working now, but I don't know for how long. thanks for your advice thou.
then it's probably fine then, it can't get worse at least
anonxlg said:
then it's probably fine then, it can't get worse at least
Click to expand...
Click to collapse
Yes it can, sometimes water damage shows itself after a few hours or days (corrossion). Hope OP is lucky and there is no permanant damage :fingers-crossed:
gee2012 said:
Yes it can, sometimes water damage shows itself after a few hours or days (corrossion). Hope OP is lucky and there is no permanant damage :fingers-crossed:
Click to expand...
Click to collapse
Thanks for your reply, this is what I am mostly worried about. I don't know what I can do to meausure the extend of the damage at this point, so I am sailing blindfolded atm.
Icharius said:
Thanks for your reply, this is what I am mostly worried about. I don't know what I can do to meausure the extend of the damage at this point, so I am sailing blindfolded atm.
Click to expand...
Click to collapse
Put the turned off phone covered in a bowl with uncooked rice asap and let it in for a day or two to extract as much moisture as possible :good:
Well it seems it is done.
First the volume button went out, then the power button. I tried and clean it again with alcohol to no avail. Send it to a repair shop to see if they can fix it since the phone is still working but can't turn it off without the buttons.
Thanks everyone that chime in. really appreciate it!