Hey guys did a clean install to update to the latest build of fi27 using agats 6.2. Now when i use my car charger it says voltage too high? So i switched to kubans latest and same thing. So is part of the new build. Its very strange ive never seen this before.
Sent from my SPH-D710 using xda app-developers app
xe4zy said:
Hey guys did a clean install to update to the latest build of fi27 using agats 6.2. Now when i use my car charger it says voltage too high? So i switched to kubans latest and same thing. So is part of the new build. Its very strange ive never seen this before.
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
When this issue happened to me, I took my phone into the Sprint store and they tested and found that the battery was bad. I had tried the phone of a couple of different car chargers before that and I received that same message on all of them.
djakx1 said:
When this issue happened to me, I took my phone into the Sprint store and they tested and found that the battery was bad. I had tried the phone of a couple of different car chargers before that and I received that same message on all of them.
Click to expand...
Click to collapse
Thanks for the input. Not sure if its the battery. Use my normal charger at home. No problems there. When i use my charger then i get that. ****ing weird
Sent from my SPH-D710 using xda app-developers app
Universal car chargers are very bad for batteries. You always want to charge your phone more on the original charger. Only use a car charger when it is absolutely necessary to charge your phone.
Sent from my SPH-D710 using xda premium
Sprint will tell you it is a bad battery in order to keep from exchanging your device, this is the beginning part of the usb port starting to fail...I had this, I checked everywhere and then eventually the port gave in and went bad. Sprint exchanged my device.
hooover said:
Sprint will tell you it is a bad battery in order to keep from exchanging your device, this is the beginning part of the usb port starting to fail...I had this, I checked everywhere and then eventually the port gave in and went bad. Sprint exchanged my device.
Click to expand...
Click to collapse
Thanks guys. Yeah very weird. Never had a problem before but now even when i switch back to gb same result. So this could be a sign of usb port failure? Good thing my upgrades in march. fingers crossed i also land my job at sprint but **** man just to get hired what a process its been two weeks. Hopefully when i work there maybe i can put in my two cents that would actually be benefical to the devs.
Sent from my SPH-D710 using xda app-developers app
Had this same issue yesterday after flashing FI27. Started with "voltage too high" eventually wouldnt charge at all. Luckily i have a repair center a mile ftom home.
Dropped off the phone and the rep seemed to be quite familiar with the problem. She said its been fairly common recently. They ordered me a new phone for Thur. Im pretty happy cause this assurion refurb has been locking up and running super hot since I got it.
Sent from my SPH-D710 using Tapatalk 2
dberend said:
Had this same issue yesterday after flashing FI27. Started with "voltage too high" eventually wouldnt charge at all. Luckily i have a repair center a mile ftom home.
Dropped off the phone and the rep seemed to be quite familiar with the problem. She said its been fairly common recently. They ordered me a new phone for Thur. Im pretty happy cause this assurion refurb has been locking up and running super hot since I got it.
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
Did you have to pay the $100 or whatever the cost of the deductible is?
Ever since I flashed agats 0.6.2 kernel my battery icon blinks. An even after unplugging the phone it still says its charging. Even if I take the battery out for hours today and put it back in it says charging on the lock screen and if I try to turn on adb it says please unplug usb cord. And the other weird thing is soon as I put the battery in it boots up with out holding the power button.
Sent from my SPH-D710 using Tapatalk 2
quazimodem said:
Did you have to pay the $100 or whatever the cost of the deductible is?
Click to expand...
Click to collapse
Nope, covered under warranty. I had a few dings but no water damage/cracked glass
Sent from my SPH-D710 using Tapatalk 2
Hey guys back again...so uh yeah ive tried everything my guess is the battery needs to go. Ive even set my cpu to 600 -200 and no luck the sucker just keeps draining. So i guess anyone know a good place to buy a battery for this phone? Im mean a site that is trustworthy?
Sent from my SPH-D710 using xda app-developers app
xe4zy said:
Hey guys back again...so uh yeah ive tried everything my guess is the battery needs to go. Ive even set my cpu to 600 -200 and no luck the sucker just keeps draining. So i guess anyone know a good place to buy a battery for this phone? Im mean a site that is trustworthy?
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
I''ve had good luck with these http://www.amazon.com/dp/B006GM6IF2/ref=cm_sw_r_an_am_ap_am_us?ie=UTF8
Sent from my SPH-D710 using Tapatalk 2
dberend said:
I''ve had good luck with these http://www.amazon.com/dp/B006GM6IF2/ref=cm_sw_r_an_am_ap_am_us?ie=UTF8
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
Thanks bro. Hoping it is just the battery and not my usb port going bad.
Sent from my SPH-D710 using xda app-developers app
If it's the same problem, I think it has to do with the charging circuits. My battery charged fine on an external charger. In fact at the Sprint store the were going to give me the old battery in my new refurb. Told them I didn't want it if there was a possibility the voltage protection was going bad, might have shortened its life.
Sent from my SPH-D710 using Tapatalk 2
Related
I am having a real problem here whenever i plug my phone into my wall socket or computer it will charge for about 5 seconds then say battery disconnected. I am on phantom hackers blazer rom v 3.7 and this just started happening yesterday when i installed 2 mods a battery icon and social hub. I restored because i thought it was one of the files but i still cant charge. Any advice would be greatly appreciated, thanks.
Sent from my SPH-D710 using XDA App
Anyone? I thought it may have been a software issue so I did a full data wipe, wiped everything and installed calkulins 2.8 and it is still doing it. Now sometimes it wont even recognize the battery when I try to charge it when the phone is off. Do you guys think its a failing battery or the phone? I should also not that the phone has always been extremely sensitive like if it I hit it by accident or drop it from even a couple inches it will reboot.
Night want to take it to sprint if it has always had issues
Sent from my SPH-D710 using XDA App
Ya i am thinking the same thing I dont know what they will do for me though because I dont have insurance and there stupid 14 day warranty is ridiculous!
rbtrucking said:
Ya i am thinking the same thing I dont know what they will do for me though because I dont have insurance and there stupid 14 day warranty is ridiculous!
Click to expand...
Click to collapse
Well if you do have insurance they will charge you, but what you might want to tty is using a different charger.. my charger broke the other day (it wasn't charging my phone ) and i grabbed my old HTC charger. Hope this helps..
Sent from my SPH-D710 using XDA App
Ya I flashed it back to stock it is still messed up. Anyone think it might just need a new battery?
davidc23 said:
Well if you do have insurance they will charge you, but what you might want to tty is using a different charger.. my charger broke the other day (it wasn't charging my phone ) and i grabbed my old HTC charger. Hope this helps..
Sent from my SPH-D710 using XDA App
Click to expand...
Click to collapse
ya I have tried numerous chargers usb style and wall they all do the same thing. Connects for like 3 seconds then I get a pop up saying battery disconnected.
rbtrucking said:
Ya I flashed it back to stock it is still messed up. Anyone think it might just need a new battery?
Click to expand...
Click to collapse
I mean, try the charger and then the battery. If you don't have a battery arrouns you, go to sprint and ask them if you can see if you're battery is messed up. They will more than likely give you one for free
Sent from my SPH-D710 using XDA App
davidc23 said:
I mean, try the charger and then the battery. If you don't have a battery arrouns you, go to sprint and ask them if you can see if you're battery is messed up. They will more than likely give you one for free
Sent from my SPH-D710 using XDA App
Click to expand...
Click to collapse
Ya I dont but I am taking it back to sprint later today to see what is going on. I am pretty sure it is either the battery or a loose connection somewhere in the phone because like I said in my earlier post this thing has always been extremely sensitive like if I accidentally put it down hard or anything it will reboot. Also like I said in my other thread it likes to reboot randomly when just in my pocket too. I also noticed whenever I try to run titanium backup it reboots 99% of the time before it finishes.
rbtrucking said:
Ya I dont but I am taking it back to sprint later today to see what is going on. I am pretty sure it is either the battery or a loose connection somewhere in the phone because like I said in my earlier post this thing has always been extremely sensitive like if I accidentally put it down hard or anything it will reboot. Also like I said in my other thread it likes to reboot randomly when just in my pocket too. I also noticed whenever I try to run titanium backup it reboots 99% of the time before it finishes.
Click to expand...
Click to collapse
Okay that sounds good, I hope I helped. I have to go to school now. Hope someone else drops by and helps.
Sent from my SPH-D710 using XDA App
davidc23 said:
Okay that sounds good, I hope I helped. I have to go to school now. Hope someone else drops by and helps.
Sent from my SPH-D710 using XDA App
Click to expand...
Click to collapse
You definitely helped, I really appreciate it. I will keep ya posted as to what sprint says.
rbtrucking said:
You definitely helped, I really appreciate it. I will keep ya posted as to what sprint says.
Click to expand...
Click to collapse
It really sounds like a bad micro USB port. They will take care of you at the store
Sent from my SPH-D710 using xda premium
JohnCorleone said:
It really sounds like a bad micro USB port. They will take care of you at the store
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Well the thing is I can transfer stuff flawlessly on it. I took it to the sprint store the guy played with it for 2 hours and told me there is absoluetly nothing wrong with it so I dont know what to think. It has been running good ever since I got it back. I knew that would happen though as soon as ya bring something in to get it fixed it works flawlessly! The guy gave me a new charger idk I did try numerous chargers and they all said battery disconnected but this one actually does seem to be working so we will see what happens.
Ok so here is the story, I noticed my micro usb was fitting in my phone pretty losely a few days ago. I didn't think anything of it, but today I was at work with 30% battery. So I go to charge it (stock wall mount & usb from my house) and noticed it wasnt charging. So after work I went to the mall to buy a charger, the ones they had didn't work, so I went to tmobile, and there's didn't work either. I came to the conclusion that my usb port is broken =/ my phone was completely dead for a few hours (plugged in the wall at home, hoping it'll charge) and as of 3 hours its gone from 0% to 15%, and the charging "lightning" bolt isn't over the battery indicating a charger is being recognized. Also it doesn't say its charging on the lock screen either. I am completely confused, is it a bad usb port? Bad battery? What should I do? I'm using an old G2 I found in a drawer until I find a solution.
Also I bought my Phone from some guy on craigstlist eliminating possible warranty right?
Thank guys!
Sent from my T-Mobile G2 using xda app-developers app
You can still try warranty and see if that works. I guess when you are submitting the service request just say what's wrong. I bought a phone from someone some time ago and sent it in for repair. Fixed no questions asked.
Sent from my Galaxy Nexus using xda app-developers app
Ieatnoobs said:
You can still try warranty and see if that works. I guess when you are submitting the service request just say what's wrong. I bought a phone from someone some time ago and sent it in for repair. Fixed no questions asked.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
I appreciate your input, who do I call?? Its not a tmobile device
Sent from my T-Mobile G2 using xda app-developers app
fuego77 said:
I appreciate your input, who do I call?? Its not a tmobile device
Sent from my T-Mobile G2 using xda app-developers app
Click to expand...
Click to collapse
You call Samsung of course. But when I called them for a warranty, they asked me for the receipt. So you might need it too... But doesn't hurt.
Swyped on my Galaxy Nexus running AOKP with Franco Kernel, overclocked to 1.4GHz
kyokeun1234 said:
You call Samsung of course. But when I called them for a warranty, they asked me for the receipt. So you might need it too... But doesn't hurt.
Swyped on my Galaxy Nexus running AOKP with Franco Kernel, overclocked to 1.4GHz
Click to expand...
Click to collapse
I don't have a reciept =O
And ill try calling them tomorrow. Will I need to relock my bootloader right?
Sent from my T-Mobile G2 using xda app-developers app
Here's an update. I pulled the battery out and back in then kept the phone off while the charger was in the phone, so it showed the Barry charing icon. I let it sit that way over night and when I turn the phone on this morning its 100% battery, but frankly it won't charge back up again. Its not recognizing my charger, I'm guessing it'll only charge the phone if the phone is off?
Sent from my Galaxy Nexus using xda app-developers app
So I got an epic touch it gives me a info tab" charging paused. Voltage too high." When I disconnect the charger from phone. Tried factory reset, changing rom, full wipe, different chargers, everything. I am rooted but it happened out of the blue while using stock rom. Plz help tia
Edit: the msg pops up every minute or 2
Sent from my SPH-L710 using xda app-developers app
Rodrigo87 said:
So I got an epic touch it gives me a info tab" charging paused. Voltage too high." When I disconnect the charger from phone. Tried factory reset, changing rom, full wipe, different chargers, everything. I am rooted but it happened out of the blue while using stock rom. Plz help tia
Edit: the msg pops up every minute or 2
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
To make sure, you have it disconnected and it's giving this error?
Maybe something on the MicroUSB leads that makes it think it's still charging?
garwynn said:
To make sure, you have it disconnected and it's giving this error?
Maybe something on the MicroUSB leads that makes it think it's still charging?
Click to expand...
Click to collapse
Thats correct sir. I think thats what it is, im going to take it to a sprint repair store. Thank you
Sent from my SPH-L710 using xda app-developers app
Rodrigo87 said:
Thats correct sir. I think thats what it is, im going to take it to a sprint repair store. Thank you
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Probably the easiest and best choice in this case. Hope they can repair it for you or offer a replacement.
Corrosion on charge port! The smallest bit can cause this! Happened with mine... I can fix.. For a price lol jk... I really can fix and really id need a price but just try to safely get charge port off and clean the crap out of it and solder it back on without damaging it
Sent from an Apple killing JellyBean
Since December I've been running CM10 on my GS-III with little to no issues. I flash CM 10.1 mid January and even though it was an unstable nightly it was very stable.
Flashing the nightlies as they became available with no issues at all.
Then today my phone starts slowing down and froze up.
Keep in mind that I hadn't flashed a nightly in like a day or 2 do I had been using the past nightly as a daily driver.
When my phone decided to freeze I rebooted it and it booted just fine.
About 2 minutes in the screen goes black. Holding the power button it's unresponsive.
Now my phone is completely unresponsive to all button presses. I've tried the 3 button combos for recovery and download mode with no luck. I've even held the buttons for a full minute but nothing is working.
Is my phone dead or is there a possibility of resurrecting it?
Sent from my SGH-T959 using xda premium
Are you positive the battery hasn't died. That would be the first thing I would check. Even if it showed it was charging doesn't mean the battery is good. I'm not trying to be insulting either by asking this. I'm a equipment tech at a large semiconductor company and you wouldn't believe the number of times the fix was as simple as turning a breaker back on when another tech wanted to replace something major. #1 rule of troubleshooting: Is there power. #2 rule: Double check rule #1. Sounds silly, but it is the easiest thing to overlook. Good luck and I hope it's as simple as a battery.
Sent from my AT100 using xda premium
tmjohnsonfse said:
Are you positive the battery hasn't died. That would be the first thing I would check. Even if it showed it was charging doesn't mean the battery is good. I'm not trying to be insulting either by asking this. I'm a equipment tech at a large semiconductor company and you wouldn't believe the number of times the fix was as simple as turning a breaker back on when another tech wanted to replace something major. #1 rule of troubleshooting: Is there power. #2 rule: Double check rule #1. Sounds silly, but it is the easiest thing to overlook. Good luck and I hope it's as simple as a battery.
Sent from my AT100 using xda premium
Click to expand...
Click to collapse
No you're not insulting by asking that. I use to record music and when something wasn't wasn't working that's the first thing we asked and re asked.
Unfortunately I do believe I checked that out. When I plug in a charger it doesn't even show me a battery charging logo.
I have noticed that when I pull out the battery and connect the charger the led turns red.
I'll see if i can't swap batteries with one of my friends and see if that helps.
Sent from my SGH-T959 using xda premium
Can adb on your pc detect your phone by any chance ? I do not want to scare you but hopefully your not having a motherboard failure or a sudden death :/
Sent from my SGH-T999 using xda premium
shahkam said:
Can adb on your pc detect your phone by any chance ? I do not want to scare you but hopefully your not having a motherboard failure or a sudden death :/
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I'm checking that right now
Sent from my SGH-T959 using xda premium
Well unfortunately there's no response from adb or phone.
However the computer does make a usb device connected sound.
Not sure if that's just a standard sound from the computer or if the phone is triggering it.
Sent from my SGH-T959 using xda premium
Did you do the three button combos for the T-Mobile version? They are different from the other s3s. Zedomax's root video shows them, well
Sent from my SGH-T999 using xda premium
Android_Monsters said:
Did you do the three button combos for the T-Mobile version? They are different from the other s3s. Zedomax's root video shows them, well
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
This.
Sent from my SGH-T999 using xda premium
Android_Monsters said:
Did you do the three button combos for the T-Mobile version? They are different from the other s3s. Zedomax's root video shows them, well
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
shahkam said:
This.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I have tried the 3 button combos for T-Mobiles variant of the GS-III with no luck either.... I even tried making a jig and didn't have much luck....
Next step is to buy a jig and see if that works
Thankfully I got a replacement GS-III from insurance. So I'm content... Also since I get to keep the other GS-III as well it feels even nicer.
Sent from my SGH-T959 using xda premium
ironlood said:
I have tried the 3 button combos for T-Mobiles variant of the GS-III with no luck either.... I even tried making a jig and didn't have much luck....
Next step is to buy a jig and see if that works
Thankfully I got a replacement GS-III from insurance. So I'm content... Also since I get to keep the other GS-III as well it feels even nicer.
Sent from my SGH-T959 using xda premium
Click to expand...
Click to collapse
A usb jig should do it most of the time it do work and if it doesn't oh well you could sell it out for parts i guess ?
Sent from my SGH-T999 using xda premium
You would probably make most of your back if you sold it for spare parts and may only have to pay $50 for a replacement. Good luck!
-------------------------------------
ROM: All-star ROM v7
Kernel: Lighting
Radio: LB7 blaze
-------------------------------------
I'm trying to make an app, message if you are willing to help!
-------------------------------------
I'm not sure I understand how a jig is going to help him when the phone won't turn on.
I would try another battery first. You said you were going to try this but I don't see where you confirmed that it wasn't the issue.
Hmm you could have ran into that now infamous mb crash and burn error although I'm not sure how since you were running aosp. Anyone else want to chime in?
Sent from my SPH-L710 using Tapatalk 2
If the battery truly died plugging it in won't be any help
Try another battery, I'm betting that's the issue. T-Mobile will have one or two on hand in store so you can try
Hopefully I will be able to get my hands on a spare battery to test this with as soon as I'm off work.
Sent from my SGH-T999 using Tapatalk 2
Yeah first of lets make sure its not the battery and the jig forces the phone to boot into download mode if im not mistaken.. It is intended for users having similar issues / unresponsive devices...
Sent from my SGH-T999 using xda premium
shahkam said:
Yeah first of lets make sure its not the battery and the jig forces the phone to boot into download mode if im not mistaken.. It is intended for users having similar issues / unresponsive devices...
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Well unfortunately the spare battery i used on my phone was no good in getting the phone to respond.
Now my next step is to attempt to hope that the jig will do something for my phone.
If not i guess that i will have a nice paper weight of luxury lol
Either that or i can sell it to someone.
So far those are the only options that i think i have at the moment.
Sent from my SGH-T999 using Tapatalk 2
Flash STOCK or different ROM (Don't forget kernel too) think the issue is with the Cyanogenmod, mine did something similar, when screen went dark it took literally 5-10 Power button presses to wake the phone up, sometimes it wouldn't respond, other soft keys only would light up, Make backup, Wipe, install, check everything, that what I would do
Shayd93 said:
Flash STOCK or different ROM (Don't forget kernel too) think the issue is with the Cyanogenmod, mine did something similar, when screen went dark it took literally 5-10 Power button presses to wake the phone up, sometimes it wouldn't respond, other soft keys only would light up, Make backup, Wipe, install, check everything, that what I would do
Click to expand...
Click to collapse
He cannot flash anything his phone doesn't answer to anything i don't see how he could do that..
Sent from my SGH-T999 using xda premium
The phone is dead. My friend's gs3 died suddenly one day while I just happen to be using it. I plugged in an otg plug and few minutes later the screen just went black. I was sure it was dead when I plug in a charger and there was no sign of life from the phone.
I don't know if you have to pay a deductible but Samsung is supposedly replacing galaxy s3 for free because there is a known defect which cause the motherboard to go bad. My friend's was a Verizon model and they just replaced it free.
Sent from my SGH-T999 using Tapatalk 2
I have problems with my bluetooth headphones. It will connect and I can hear music for about 1 minute then it stops, my phone becomes unresponsive then it will usually reboot but get stuck. I usually have to pull the battery to restart.
I'm curious if there is something that I have flashed in the past to cause this.
The headphones work fine on my wifes 4g touch and my galaxy tablet as well.
I've even unrooted and went back to stock but still no luck.
Sent from my SPH-D710 using xda app-developers app
Michael61182 said:
I have problems with my bluetooth headphones. It will connect and I can hear music for about 1 minute then it stops, my phone becomes unresponsive then it will usually reboot but get stuck. I usually have to pull the battery to restart.
I'm curious if there is something that I have flashed in the past to cause this.
The headphones work fine on my wifes 4g touch and my galaxy tablet as well.
I've even unrooted and went back to stock but still no luck.
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
Make sure all the screws in the back of the phone are very tight. If one is loose you may have a bad antenna connection.
I checked all the screws, they are all tight.
Sent from my SPH-D710 using xda app-developers app
I'm wondering if I were to switch the motherboard out with a phone that has a bad ESN will that affect this phone?
Sent from my SPH-D710 using xda app-developers app
The ESN follows the board unless you were to do that which we do not talk about on this board...
Hint
Hint.
Interesting, I didnt have that in mind, but may be worth a try. I saw some cheap S2's on ebay with bad ESN's. I'm just interested in getting my bluetooth working. I removed my motherboard last night just to see if I could see anything work visually. I already sent my phone to Samsung but they said it was OOW for having a cracked screen. The wanted to charge $160 to fix it.
Sent from my SPH-D710 using xda app-developers app
Michael61182 said:
Interesting, I didnt have that in mind, but may be worth a try. I saw some cheap S2's on ebay with bad ESN's. I'm just interested in getting my bluetooth working. I removed my motherboard last night just to see if I could see anything work visually. I already sent my phone to Samsung but they said it was OOW for having a cracked screen. The wanted to charge $160 to fix it.
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
You can get used E4GTs all day long for under $100 in good condition on Craigslist where I am. I usually see them running $50-$75, but I paid $30 for the last one I bought.
I would suggest buying a new one, and selling the defective one on eBay for parts. If the shell is in fair condition someone will buy it.
The other option, if you are not under contract, is to consider an upgrade to the s4. I have seen some $0-$50 prices so far this holiday season.