Develop Bugs

Samsung Galaxy Nexus Suddenly Stopped Working!

I was using the phone today and the screen suddenly locked up on me. It wouldn't respond to any button presses so I just did a battery pull to reset it. However, the phone won't turn back on now. It doesn't do anything, even when plugged into the charger, the phone doesn't even indicate that it's charging or anything at all. It's like it has been completely bricked.
It was completely stock, never unlocked it or rooted and never installed any custom rom or anything of that nature. I've only had the phone for a couple of months and I'm completely baffled as to what could have happened. It certainly wasn't anything that I did.
Any ideas? Or does anyone have any experience with this type of thing happening to their phone?

So I've left the battery out for over 30 minutes and it still won't turn on. I have an extended battery and the regulary battery that came with the phone and it won't turn on with either battery.
I have also tried the volume down and power button method and that doesn't do anything at all either.
Plugging the phone into the computer with the USB cable also does nothing.

How long have you had the phone. Did you buy it from a store?
.....Clones & Drones.....

Mine did the exact same thing! It was realy weird, however all i did was keep the power button pressed and it rebooted fine.
Sent from my Galaxy Nexus using xda premium

ptmr3 said:
How long have you had the phone. Did you buy it from a store?
.....Clones & Drones.....
Click to expand...
Click to collapse
I got the phone when it was released and I ordered it online right from Verizon's website.

I hope that you have the warranty from the carrier!

gulmat said:
Mine did the exact same thing! It was realy weird, however all i did was keep the power button pressed and it rebooted fine.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I wish it was that simple for me.. I held the power button down for over a minute and still, nothing happened. This is really frustrating.

!!!!!!!+111111
evolishesh said:
I hope that you have the warranty from the carrier!
Click to expand...
Click to collapse
.....Clones & Drones.....

ptmr3 said:
!!!!!!!+111111
.....Clones & Drones.....
Click to expand...
Click to collapse
I'm not sure about that one. I know I don't have insurance thru verizon but isn't there a manufacturer warranty? Like I could get a refurb from verizon instead of a brand new one?
I've never had a smartphone just stop working for no reason at all and I was never really into modding them so I thought I was safe. I guess I was wrong.
Really disappointed in Samsung right now. This is my first nexus device, not sure if I'll get another.. That's totally lame to have a crap product that just stops working for no reason. This is an unmodded phone, completely stock, never been dropped or anything of that sort. The only thing that I did was swap the regular battery out for the extended version.

russ4h said:
I'm not sure about that one. I know I don't have insurance thru verizon but isn't there a manufacturer warranty? Like I could get a refurb from verizon instead of a brand new one?
I've never had a smartphone just stop working for no reason at all and I was never really into modding them so I thought I was safe. I guess I was wrong.
Really disappointed in Samsung right now. This is my first nexus device, not sure if I'll get another.. That's totally lame to have a crap product that just stops working for no reason. This is an unmodded phone, completely stock, never been dropped or anything of that sort. The only thing that I did was swap the regular battery out for the extended version.
Click to expand...
Click to collapse
I'd definitely go to Verizon with this. Most definitely manufacturer defect.

Hold down volume up and volume down and the power button. Does it boot into fast boot? Id say if it doesn't do anything then go ahead and call your carrier because its a faulty unit. You can also try plugging it in without a battery and then Inserting the battery. That also saw sends a power up signal to the device. Though I don't know if this trick works on a nexus three. This was an old trick to "jump start" a nexus one that had a faulty power button. But aside from all this, it sounds to me like you've got a faulty unit whether you get it running or not. Probably just need to swap it , sounds like something went pop.
Sent from my Galaxy Nexus using Tapatalk

You should be able to get a refurbished phone.its probably just a manufacturer defect.
Sent from my Galaxy Nexus using Tapatalk

android01 said:
Hold down volume up and volume down and the power button. Does it boot into fast boot? Id say if it doesn't do anything then go ahead and call your carrier because its a faulty unit. You can also try plugging it in without a battery and then Inserting the battery. That also saw sends a power up signal to the device. Though I don't know if this trick works on a nexus three. This was an old trick to "jump start" a nexus one that had a faulty power button. But aside from all this, it sounds to me like you've got a faulty unit whether you get it running or not. Probably just need to swap it , sounds like something went pop.
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Thanks for the tips, I tried the volume up, volume down, and power button method just now and it doesn't do anything. I Also just tried plugging it in and then putting the battery in and nothing as well.
The thing is, I don't have insurance thru Verizon (i.e. the $5 a month thing). Would going to them even benefit me at all? Do you know if they would offer a refurb or something?

The phone has a 1 year warranty on it. You shouldn't have to pay anything but you might just get a refurbished replacement.

I think I had the same thing happen to me a few days ago. However, I have the GSM version that I bought from amazon (thru a third party seller), so no warranty. Yeah, I know. Smart. Also, in my case, I unlocked the bootloader so I could flash the official yakju so I would get updates faster from google. Despite some lagginess with 4.0.2, it had been working great for a month+.
When mine crashed, all I did was press the back button and the screen went crazy and froze up, then started glitching and made a buzzing sound. I pulled the battery and tried a reboot. The Google logo would glitch and "ghost" and then the animation would start, but it was slower and choppy. After a few seconds, it froze and the screen was all low-rez looking and I could see what I can only describe as strange pixelation or scan lines (with a few of them moving from the top of the screen down to the bottom in a continuous loop). The only way to get it to stop was another battery pull.
I tried to use fastboot to get back in and reflash to the original firmware, but I kept getting a usb error (didn't have that when I first unlocked the bootloader using a mac, so not sure what the problem was). Now, the phone won't get passed the Google logo and just sits there for 30+ minutes without making any progress (that I can see). I keep trying to get back into the bootloader using fastboot, but now it won't even do that.
I've contacted Samsung/UK (as that's where mine originated), but don't think I will be getting any help based on their initial response. And, since my bootloader is unlocked, that probably voided the warranty anyway. I have no idea what happened, but it seems like some sort of combination of hardware/software problem. So, basically I'm screwed and out $700.

russ4h said:
Thanks for the tips, I tried the volume up, volume down, and power button method just now and it doesn't do anything. I Also just tried plugging it in and then putting the battery in and nothing as well.
The thing is, I don't have insurance thru Verizon (i.e. the $5 a month thing). Would going to them even benefit me at all? Do you know if they would offer a refurb or something?
Click to expand...
Click to collapse
I'd say go contact Verizon and see what they say. If they can't help you out then you gotta contact Samsung and I believe (if my memory serves me right) all their products have a one year warrenty from the day the phone was used. So you should see what they have to say.

Similar thing happened to me, it rebooted itself, as it has been doing quite a bit of lately, and then wouldnt turn on no matter what I did.
Eventually just help the POWER and VOL DOWN button together to reboot, and it worked fine again. I'm completely stock wtf.

tandp74 said:
I think I had the same thing happen to me a few days ago. However, I have the GSM version that I bought from amazon (thru a third party seller), so no warranty. Yeah, I know. Smart. Also, in my case, I unlocked the bootloader so I could flash the official yakju so I would get updates faster from google. Despite some lagginess with 4.0.2, it had been working great for a month+.
When mine crashed, all I did was press the back button and the screen went crazy and froze up, then started glitching and made a buzzing sound. I pulled the battery and tried a reboot. The Google logo would glitch and "ghost" and then the animation would start, but it was slower and choppy. After a few seconds, it froze and the screen was all low-rez looking and I could see what I can only describe as strange pixelation or scan lines (with a few of them moving from the top of the screen down to the bottom in a continuous loop). The only way to get it to stop was another battery pull.
I tried to use fastboot to get back in and reflash to the original firmware, but I kept getting a usb error (didn't have that when I first unlocked the bootloader using a mac, so not sure what the problem was). Now, the phone won't get passed the Google logo and just sits there for 30+ minutes without making any progress (that I can see). I keep trying to get back into the bootloader using fastboot, but now it won't even do that.
I've contacted Samsung/UK (as that's where mine originated), but don't think I will be getting any help based on their initial response. And, since my bootloader is unlocked, that probably voided the warranty anyway. I have no idea what happened, but it seems like some sort of combination of hardware/software problem. So, basically I'm screwed and out $700.
Click to expand...
Click to collapse
That's awful man. I've been reading more and more about random reboots happening with this phone and what not.. I just don't know what to think right now, I thought this was supposed to this beast of a phone and now after only a couple of months, it has completely stopped working for no apparent reason at all. Pretty lame, and this has definitely never happened to me before as I always take care of my phones. I just figured that if something were to happen to this phone, it would be from my own doing, just as it has been with every other phone that I've ever owned (ie from modding, from a drop, etc.). Samsung gets a thumbs down from me, I paid a lot of money to get this phone and now I'm going to be stuck with a refurb because they have put out a crap product.
As for you, I wouldn't even tell Samsung that you unlocked it. They probably won't be able to tell if you did or not since the phone won't boot properly. They should offer you a refurb, so you'll be in the same boat as me. I went into Verizon today and that's the best that they could do. I have to wait til Monday for it to come in the mail. I'm stuck without a phone til Monday.

volsey said:
Similar thing happened to me, it rebooted itself, as it has been doing quite a bit of lately, and then wouldnt turn on no matter what I did.
Eventually just help the POWER and VOL DOWN button together to reboot, and it worked fine again. I'm completely stock wtf.
Click to expand...
Click to collapse
Yeah, it's looking like this phone has been giving many people similar problems. Samsung must have let a bad batch slip out or something. I was completely stock as well, no unlock, no root, no custom rom, just a plain old basic user here and mine took a dump on me.

Mine does this about every other day and I have to pull the battery and restart, sorry to hear yours won't reboot. Ouch

[Q] Sudden Hardbrick

My phone hardbricked for no apparent reason, and I'm not sure what to do. Battery was at about 50% yesterday, it turned off and wouldn't turn back on. I did a soft reset, and it turned on. I watched it go as far as the logo and then had to walk away. When I came back, the phone was black again. And it hasn't turned on since. No logo, nothing. I've tried a soft reset, plus multiple other reset combinations. I plugged my phone to the computer, I get the normal connecting 'ding', but then it says that driver's device cannot be found.
I'm running stock firmware, no mods. No history of battery issues (except the normal slow decline). I've had the phone for a year and three weeks, so I'm out of warranty too. I called T-mobile and they said it sounds like a hardbrick and are willing to switch it out for $20 since I'm out of warranty. I can't do that since I'm out of the country for the next 1.5 months, so I was wondering if anyone out there had any suggestions on what to do or why this even happened?
Thanks!

goeundiane said:
My phone hardbricked for no apparent reason, and I'm not sure what to do. Battery was at about 50% yesterday, it turned off and wouldn't turn back on. I did a soft reset, and it turned on. I watched it go as far as the logo and then had to walk away. When I came back, the phone was black again. And it hasn't turned on since. No logo, nothing. I've tried a soft reset, plus multiple other reset combinations. I plugged my phone to the computer, I get the normal connecting 'ding', but then it says that driver's device cannot be found.
I'm running stock firmware, no mods. No history of battery issues (except the normal slow decline). I've had the phone for a year and three weeks, so I'm out of warranty too. I called T-mobile and they said it sounds like a hardbrick and are willing to switch it out for $20 since I'm out of warranty. I can't do that since I'm out of the country for the next 1.5 months, so I was wondering if anyone out there had any suggestions on what to do or why this even happened?
Thanks!
Click to expand...
Click to collapse
does it respond to plugging in to charge? im not 100% but if its responding at all when it gets plugged in its not hardbricked only softbricked so go from there. when i hardbricked my first s2 due to a corrupt kernel file i flashed it would not react to anything at all. complete dead weight

U stated that when u plugged it into ur computer u got a ding then says driver device not found. Sounds to me that ur not in a hard birck when I bricked mine I didn't even get that. Check out the link it well help.
http://galaxys2root.com/t-mobile-ga...ck-t-mobile-galaxy-s2-sgh-t989-android-2-3-6/
on my t989 enjoying sith3, thank u to all

Thanks for everyone's help. I ended up sending in my phone to a Samsung service center (while I was in Korea). They confirmed that it is a hardbrick. They opened it up and said it looked like there was a short and it fried the motherboard. They couldn't tell me what caused the short--they said maybe some water got into the phone through the charging port, but I know that isn't true... I had it plugged into an old power strip and maybe that's why? :crying:
Either way, I was told my only option was to get the motherboard replaced which would be $200. I told them no thanks and that I'd just get a replacement phone from T-mobile for $20.

sounds like another " I swear i didn't do anything.. it just happened" story.. classic..
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

PJcastaldo said:
sounds like another " I swear i didn't do anything.. it just happened" story.. classic..
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
I know my story sounds unlikely, but it's the truth. Isn't this forum around to help fellow users? I have no reason to lie here. I actually take very good care of my phone and (after almost losing a laptop to a water spill) am extremely cautious about liquids around my electronic devices. You don't have to believe me since I'll get my phone replaced regardless. I just thought I would share the information in case someone else ends up facing the same problem.
Even now, the only cause I can come up with still is the old power strip frying the motherboard. *shrug* I would love to hear any other explanations.

[Q] Gray screen of death

Hi,
i was using muiu rom JB and phone got a grey screen and wont restart, i tried pulling out the batter and starting it back up but didn't work still grey screen on start up after the LG logo. I did try going back to stock ICS and GB but both not doing any good. If i remove the batter for few min and replace it it starts working fine but the issue recurred after few hrs ond one time it went a whole day with no issues, i noised what happend first is the phones speakers and mine would go numb no sound in ringtone, music or while calling if u restar it you get grey screen on start up so basically i cant yous my phone anymore i thing its like the phones GPU is broken. screen is ok as i can get to download mode and factory reset.
and help would be appreciated, i am from India and any of you guys from India tell me where can i get my phone repaired, i tried taking it to lg service center but since nitro hd was not lunched in India they wont take up the phone:crying: :crying::crying::crying:

mith13 said:
Hi,
i was using muiu rom JB and phone got a grey screen and wont restart, i tried pulling out the batter and starting it back up but didn't work still grey screen on start up after the LG logo. I did try going back to stock ICS and GB but both not doing any good. If i remove the batter for few min and replace it it starts working fine but the issue recurred after few hrs ond one time it went a whole day with no issues, i noised what happend first is the phones speakers and mine would go numb no sound in ringtone, music or while calling if u restar it you get grey screen on start up so basically i cant yous my phone anymore i thing its like the phones GPU is broken. screen is ok as i can get to download mode and factory reset.
and help would be appreciated, i am from India and any of you guys from India tell me where can i get my phone repaired, i tried taking it to lg service center but since nitro hd was not lunched in India they wont take up the phone:crying: :crying::crying::crying:
Click to expand...
Click to collapse
What happens when you do a factory reset? Does it load into CWM?

you can access download mode so you can unbrick your phone
I think its not a hardware problem because you can see the lg logo
If you can access cwm menu , wipe user data and cash , then flash hono stock ics.
Then if the phone startup was successful check the hardware parts via hidden menu in stock roms.
Sent from my LG-P930 using Tapatalk 2

GSOD
nss007 said:
you can access download mode so you can unbrick your phone
I think its not a hardware problem because you can see the lg logo
If you can access cwm menu , wipe user data and cash , then flash hono stock ics.
Then if the phone startup was successful check the hardware parts via hidden menu in stock roms.
Sent from my LG-P930 using Tapatalk 2
Click to expand...
Click to collapse
Hello,
Guys i did the whole unbricking guide but still when i restart the phone it goes into grey screen when the phone start up even after flashing the stock ICS and the Gb(No i was not able to gain access to CWM). The phone goes into grey screen and wont start up to set the account but if i revome the batter for a few min i can start it back up and go through the google account set up. But after a while if someone called me in the phone i cant hear what they are saying and they can hear me, if i restart is grey screen of death again. :crying::crying::crying::crying:

Thank you drumist for looking into this.
No i was not able to get into CWM. I have to do the unbricking guide to ICS was not able to go to GB as i cant root it goes into grey screen after the phone restarts while rooting causing the root to loose connection with the phone.
Please help.

I have the same problem. This is a problem in the system board. When pressed at a certain point the phone can turn on. I think the problem is contact a BGA chip
photo of issue atached

happyneser said:
I have the same problem. This is a problem in the system board. When pressed at a certain point the phone can turn on. I think the problem is contact a BGA chip
photo of issue atached
Click to expand...
Click to collapse
Yes this is the exactly the issue i am facing day by day it gets worst. The whole thing started after flashing CM10 ROM. the small bsod you get leads slowly into this. Guys i took real good care of my phone it never fell down from my hand nor does it have a scratch on it. never over did the flashing part as well, my advice is stick with the stock ICS. My Nitro is game over i bough a new Samsung s3. just a word of advice dont over do your beta flashing. :crying:

Gray screen lg p930 = solved!
Problem solved successfully!

Help Please
happyneser said:
Problem solved successfully!
Click to expand...
Click to collapse
happyneser how did u resolve the issue.
Please advice i tried every thing in the book and did not pull though.

You need to check the power IC, and make reballing
I was treated to the service (good repair workshop), they said that one of chips was soldered askew.
I think it one of this - Qualcomm PM8901, PM8058 and PM8?7? I do not know exactly.

mith13 said:
Yes this is the exactly the issue i am facing day by day it gets worst. The whole thing started after flashing CM10 ROM. the small bsod you get leads slowly into this. Guys i took real good care of my phone it never fell down from my hand nor does it have a scratch on it. never over did the flashing part as well, my advice is stick with the stock ICS. My Nitro is game over i bough a new Samsung s3. just a word of advice dont over do your beta flashing. :crying:
Click to expand...
Click to collapse
you might want to retract this statement if this issue is caused by faulty soldering and not CM10

Correction
KronicSkillz said:
you might want to retract this statement if this issue is caused by faulty soldering and not CM10
Click to expand...
Click to collapse
Dear Friend,
i believe i am still right the BSOD now a days Laptop are common mostly HP, its Due to the VGA chip being BGA(ball grid array) they are chips with small balls with soldering underneath them used for comm between the chip and the Bord. but went to chip overheats it melts the solder underneath and when it cools back down the solder get solid it a different area(we moving the phone like taking out of pocket or so) which causes lack of communication between chip and board(when they are back solid) it causes BSOD. I believe the Graphic chip in NITRO HD is using the BGA tech(It makes sense) so if our phone overheats too much the chances of De-aligning the solder in the chip is high cousin BSOD. We all know CM10 at the early stages caused overheating while in black screen coursing huge power drain in battery(we have stigmatic data with the help of battery analyst app).
So summer Nitro HD = BGA , CM10= overheating, Overheating=Bad for BGA(Causes BSOD) so overheating Nitro HD causes BSOD there u have it. i case if the phone really overheats while its in your pocket of in a uneven place and the solder goes out of place then you are in trouble like me.
Solution= Re balling or heat gun(temporary) Can FIX it.

So it's pm8028 near mdm9200

I got the same problem last weekend. I woke up and found the screen on and no sound from alarm clock. I checked and the phone got no sound at all.
I restarted the phone and got the gray screen. Late at the day the phone boot again but after another reboot it got the gray screen and never recovered.
I use CM10.1 and wind kernel with no overclock.
Too bad I didn't find any shop that reball the chips so my phone is dead
I got a i9305 today to replace it.

cn you fix the re-ball?
happyneser said:
So it's pm8028 near mdm9200
Click to expand...
Click to collapse
I think I have same problem...
my phone starts... and give me a good bright logo... but then goes black... then 2nd logo comes up and quickly fades... with
horizontal stripes....
is this same problem?? or is my phone bricked??
tks
joel

jb4home said:
I think I have same problem...
my phone starts... and give me a good bright logo... but then goes black... then 2nd logo comes up and quickly fades... with
horizontal stripes....
is this same problem?? or is my phone bricked??
tks
joel
Click to expand...
Click to collapse
Let your phone rest a bit before turning it on. still have gray logo?

constant problem since friday....
kidcalcium said:
Let your phone rest a bit before turning it on. still have gray logo?
Click to expand...
Click to collapse
REST? it's been on VACATION since friday night!
I play with it... booting and re-booting 20 times.. then I leave it alone...
been pretty much a vegetable since this past friday night!
tks
joel

jb4home said:
REST? it's been on VACATION since friday night!
I play with it... booting and re-booting 20 times.. then I leave it alone...
been pretty much a vegetable since this past friday night!
tks
joel
Click to expand...
Click to collapse
Can you enter recovery mode? If yes, do full wipe then flash your ROM.

jb4home said:
REST? it's been on VACATION since friday night!
I play with it... booting and re-booting 20 times.. then I leave it alone...
been pretty much a vegetable since this past friday night!
tks
joel
Click to expand...
Click to collapse
Make sure the phone is fully charged before you try to boot it up, if it is fading out after the logo splash screen it either sounds like a dead battery or a badly flashed rom. You can enter into recovery by holding the volume down and pressing and holding the power button till you get prompted to wipe the phone.
I have had a couple of grey screens (or "black" screens) which I was able to recover from, simply by making sure the phone was powered off, then fully charging the battery for 4 hours, then booting into recovery and flashing a different ROM
nz

ok... will attempt to reload
will try and download and attempt .....
best and easiest place to get files??
tks

[Q] Stuck on Android screen

I bought this tablet as a gift sometime in May of 2012. It was a refurbed unit but worked flawlessly since then. This morning, it was left turned on, as it always is, and when we returned to it later in the day it was off.
It was turned back on, booted past the Acer screen and stopped on the Android screen. It just keeps looking like its loading, but nothing happens. It was left on the charger for a while to see if maybe that helped but nothing. It turns off if the power button is held and we even tried the reset button only to keep coming back to the Android screen.
I would suspect the mother board failure that seems to be plaguing these things but those only get to the Acer screen. This one is getting to the Android screen atleast.
The tablet is COMPLETELY stock. Stock OTA ICS ROM, stock recovery, stock everything. I haven't flashed anything to it, no new apps were installed recently. Is it possible to recover the tablet back to its former self? I figured I would ask if there was anything I could possibly do before trying a hard reset.
I've used adb and all that for rooting and flashing ROMs on my phones before, so I would be comfortable doing so on the A100 if I have to but I'm assuming a hard reset will be the only choice at the moment.
Thanks!

hkt03 said:
I bought this tablet as a gift sometime in May of 2012. It was a refurbed unit but worked flawlessly since then. This morning, it was left turned on, as it always is, and when we returned to it later in the day it was off.
It was turned back on, booted past the Acer screen and stopped on the Android screen. It just keeps looking like its loading, but nothing happens. It was left on the charger for a while to see if maybe that helped but nothing. It turns off if the power button is held and we even tried the reset button only to keep coming back to the Android screen.
I would suspect the mother board failure that seems to be plaguing these things but those only get to the Acer screen. This one is getting to the Android screen atleast.
The tablet is COMPLETELY stock. Stock OTA ICS ROM, stock recovery, stock everything. I haven't flashed anything to it, no new apps were installed recently. Is it possible to recover the tablet back to its former self? I figured I would ask if there was anything I could possibly do before trying a hard reset.
I've used adb and all that for rooting and flashing ROMs on my phones before, so I would be comfortable doing so on the A100 if I have to but I'm assuming a hard reset will be the only choice at the moment.
Thanks!
Click to expand...
Click to collapse
Hard reset and pray. If that doesn't do it, I'm not sure acer will work with it as a refurb.
Sent from my HTC DNA

pio_masaki said:
Hard reset and pray. If that doesn't do it, I'm not sure acer will work with it as a refurb.
Sent from my HTC DNA
Click to expand...
Click to collapse
that's what I was afraid of, was just hoping there was hope haha
thanks

[Q] Samsung Galaxy S3 Completely Dead

Forum Noob here, I was using my Galaxy S3 (Wind) and all of a sudden the screen went black and it turned off. Something similar had happened a couple hours before and the phone wouldn't turn on through the power button so I simply took out the battery and put it back in and it worked. Then when it happened for a second time I tried the same thing but to no avail the phone stayed dead.
So far I've tried:
Using another GS3 Stock Battery
Tried getting into download and recovery mode
Tried charging it (I do know that the battery is charging since I checked it on another phone. The red light is not on but it turns on when I take out the battery and then plug it in. After 20-30 seconds of battery insertion the red light goes away and is completely unresponsive all that time)
Tried Keeping the battery out of the phone for a couple of hours (Suggested by a friend)
Also Tried connecting it to a pc, and it only connects when I keep the battery out. When it finally connects it tries to install drivers for "QHSUSB_DLOAD" but fails.
I have no idea what's happening to my phone and I would like to get it fixed as soon as possible. After some searches I've narrowed down to either a Hard Brick or a Sudden Death Syndrome but it doesn't completely match with all the characteristics of either problem. I greatly appreciate any help and I would like to know what exactly the problem is and what my best viable option.
Thank you.

Don't know why, but it's bricked. But you mentioned it started working at one point when you put the battery in. So if you take it out, then put it back, does the phone automatically try to turn on by itself?
Qhsusb is a definite indicator of a brick, but if your power button is faulty it may have caused the brick by rebooting over and over without ever fully booting up. Basically causing corruption somewhere.
There's a debrick thread stickied in development, but if the button is also faulty it may not help for long.
Sudden death is only describing a problem the international models had after release. Doesn't apply to ours in that way.
Sent from my SGH-T999 using Tapatalk

DocHoliday77 said:
Don't know why, but it's bricked. But you mentioned it started working at one point when you put the battery in. So if you take it out, then put it back, does the phone automatically try to turn on by itself?
Qhsusb is a definite indicator of a brick, but if your power button is faulty it may have caused the brick by rebooting over and over without ever fully booting up. Basically causing corruption somewhere.
There's a debrick thread stickied in development, but if the button is also faulty it may not help for long.
Sudden death is only describing a problem the international models had after release. Doesn't apply to ours in that way.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Yeah, when you put the battery back in it doesn't do anything. Also I don't think the power button is faulty I mean it's been working fine for the last year didn't really give me any problems.

TheSoldierDude said:
Yeah, when you put the battery back in it doesn't do anything. Also I don't think the power button is faulty I mean it's been working fine for the last year didn't really give me any problems.
Click to expand...
Click to collapse
Only reason I suspect the power button is you mentioned you couldn't get it to turn on using the button, but removing/replacing the battery worked. And it can work perfectly and then fail out of nowhere. So goes when you have plastic parts! But lots of people have had issues with this button recently.
Wasn't trying to convince you that was the problem, just letting you know it's a potential culprit.
But if you think it's ok, then try to use KAsp3rd's debrick thread and see if that gets you going again.
Sent from my SGH-T999 using Tapatalk

If it's completely dead then it's most likely hard bricked. My phone just got hard bricked so you will need to buy a JIG of Ebay. If it's not that then try reflashing your ROM or re rooting it. If none of that works then just take your phone in too wherever you bought it from and have them fix it. Oh a JIG is a small USB that will re write it and force it into download mode.

Your phone in stock rom ? If stock rom that is suddenly dead mean bad emmc on the logic board with my experience.

ssingh0247 said:
If it's completely dead then it's most likely hard bricked. My phone just got hard bricked so you will need to buy a JIG of Ebay. If it's not that then try reflashing your ROM or re rooting it. If none of that works then just take your phone in too wherever you bought it from and have them fix it. Oh a JIG is a small USB that will re write it and force it into download mode.
Click to expand...
Click to collapse
Since they are seeing the QHUSB_DLOAD (which is technically a hard brick) a simple USB jig wouldn't work, however they can attempt to use my recovery method. It's at no cost and just takes some time and reading.

When you attempt to restart your phone, does anything come up at all? I've been having issues over the past week, culminating in a device that won't charge, and won't complete a boot sequence. I get as far as the Samsung splash screen (and occasionally the first snippet of the ROM's splash screen) and then....a black screen and a quick buzz. Then the whole process repeats. In my case, I believe it's the power button.

P06o said:
When you attempt to restart your phone, does anything come up at all? I've been having issues over the past week, culminating in a device that won't charge, and won't complete a boot sequence. I get as far as the Samsung splash screen (and occasionally the first snippet of the ROM's splash screen) and then....a black screen and a quick buzz. Then the whole process repeats. In my case, I believe it's the power button.
Click to expand...
Click to collapse
Remove and reinsert battery. If it turns on by itself, you are probably right about the button.
Sent from my SGH-T999N using Tapatalk

You're Right I believe
tomy1986.nt said:
Your phone in stock rom ? If stock rom that is suddenly dead mean bad emmc on the logic board with my experience.
Click to expand...
Click to collapse
I went to a Samsung service center and they told me the motherboard had to be replaced.. I did some searching and found this http://forum.xda-developers.com/showthread.php?t=2178484
I've come to the conclusion that it was indeed a bad emmc (Yes, I was using stock ROM).. Any thoughts?

Nope
P06o said:
When you attempt to restart your phone, does anything come up at all? I've been having issues over the past week, culminating in a device that won't charge, and won't complete a boot sequence. I get as far as the Samsung splash screen (and occasionally the first snippet of the ROM's splash screen) and then....a black screen and a quick buzz. Then the whole process repeats. In my case, I believe it's the power button.
Click to expand...
Click to collapse
Nothing happens at all.. its completely dead, simply a paper weight.. a very bad one of sorts

TheSoldierDude said:
I went to a Samsung service center and they told me the motherboard had to be replaced.. I did some searching and found this http://forum.xda-developers.com/showthread.php?t=2178484
I've come to the conclusion that it was indeed a bad emmc (Yes, I was using stock ROM).. Any thoughts?
Click to expand...
Click to collapse
If it indeed is a Bad EMC then it should be In Warranty Repair as Samsung does offer that. If you didn't have Insurance that is.

Thank you
Perseus71 said:
If it indeed is a Bad EMC then it should be In Warranty Repair as Samsung does offer that. If you didn't have Insurance that is.
Click to expand...
Click to collapse
Nope.. xD 3 months off warranty, and yes I got it repaired from Samsung.. Motherboard was replaced, $300.. :|
Thanks to everyone helping out though
I can't believe I didn't know about these forums before :good:

Samsung Galaxy S3 died-black screen
my s3 gone black,its not getting turned on.there was red light(indicator) for some time before i tried to restart but when i tried to switch on. it's completly died,i am not getting any display.i have purchased in UK, unlocked using it now in India.some guys told me it would because of motherboard issue (if i replace motherboard it in India will it work normal,is there any possibility?)how to fix it?please give me some solutions.

screen not working
Hi all. In my s3 the red light is flashing fast. Also the screen is black but it works. Also the phone works and I can receive phone calls. Every few minutes the screen turns on for a sec and goes off again. I can feel the vibration when I touch the screen. Pkease help me.
Thanks

hard bricked
same issue, totally dead, short red light when connecting usb be, tried this http://forum.xda-developers.com/showthread.php?t=2439367 but nothing happens when holding power button, any possible help?

syben7 said:
same issue, totally dead, short red light when connecting usb be, tried this http://forum.xda-developers.com/showthread.php?t=2439367 but nothing happens when holding power button, any possible help?
Click to expand...
Click to collapse
Answered in the other thread. Just fyi, its best to only ask your question once, in one thread. It gets messy and confusing when different things are mentioned/attempted in different threads for the same issue.
Sent from my SGH-T999 using Tapatalk

DocHoliday77 said:
Answered in the other thread. Just fyi, its best to only ask your question once, in one thread. It gets messy and confusing when different things are mentioned/attempted in different threads for the same issue.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
yea, sry about that, was actually trying to get 10 posts in so that i could go post in the dev thread concerning this, gonna check out the method you sent, thanks a ton man!

STUCK
Well my s3 (us cellular r530u), has no boot but has a red led without the battery. Is there a debricking procedure? And if so..where can i find a debrick file.

There is for us. But you need to be in Sprints forums. Theres nothing for your device here, and I dont know what they have over there. Good luck though!
Sent from my SGH-T999 using Tapatalk