I've used Sony Ericsson phones before I went over to WM-phones, and on the SE phones there is a standard app that is very simple, but genious.
It is a very simple app to remember your pin numbers and/or passwords.
It works kind of like this:
At first use, you select a password and a control word. You enter the password every time you enter the program and it then displays your control word so you can check that you wrote the right password.
Whatever password you enter at program startup will get you inside, no error messages or anything. But entering the wrong passord will also display your control word wrong - whatever it might be. When inside all stored pins/passwords are displayed, but only if you write the correct password when entering they are correct. That way someone not knowing the password will not be able to tell if they actually guessed the password as the "pin numbers" show anyway, but with completely randomized numbers. So they are basically just waisting their time.
Not sure if I managed to explain so anyone can understand or if there is such an app already? I've tried dosens of wallet apps, but not succeded in finding one that is as simple and good as the one in SE phones.
I've been wanting something like this for a while. I can't use the last one I had (Flexwallet) since I had to hard reset and lost the registration number.
There are bunch of free apps to do this on your Windows Mobile device:
Cryptowallet
http://www.freewarepocketpc.net/ppc-download-cryptowallet.html
KeePassPPC
http://www.freewarepocketpc.net/ppc-download-keepassppc-v0-4-4.html
LockCrypt
http://www.freewarepocketpc.net/ppc-download-lockcrypt.html
Blender
http://www.freewarepocketpc.net/ppc-download-blender-v1-1.html
eSec
http://www.freewarepocketpc.net/ppc-download-esec-v1-0.html
You can also browse some more security related apps here:
http://www.freewarepocketpc.net/ppc-tag-secur.html
Hope that helps !
If you are interested in iPhone like interface, check this out
Password Safe
It's free too.
TESTED ON MANGO, AND WORKED FINE
Gentlemen,
I have found the reg key in some posts to disable the lock code for the windows phone, if you have configured the exchange e-mail account in Phone.
I was unable to view the specific reg key in normal registry editor. So I have converted the reg key to an xap file by using provxml method. And you can apply the key even if you don't have the registry editor app installed on your device.
Steps:
1. Deploy the xap file to your developer unlocked device.
2. Launch the app.
3. Tap on the green button, it should gibe you a success message.
4. Uninstall the app.
5. It may require to restart the device, since this is a registry change.
5. U r done. Now u will be able to turn off your phone security code even if you have configured the exchange e-mail account in your phone.
I have tested on my chevron unlocked HTC HD7, and it is working fine.
Hope some one will be looking for this.
Note: it's recommended to keep your phone with lock code enabled, but sometimes we need to keep the phone unlocked for some reasons.
If you install this xap, it will enable another wonderful feature..
By default, the 10 invalid attempts will erase ur phone. But after you install this xap, the password will be locked out for 1 min after 5 invalid attempts. Then after each attempts, the lockout time will double. I have tried untill the phone lockedout for 64 minutes. Then I stopped trying with the invalid lock codes. It will help you to keep the data safe, if anyone play with the phone, especially kids.
Note: Please don't try after 5-6 attempts if the phone didn't get locked out, may be this not compatible on your device. You may lose your data. I applied this on my T-Mobile HD7, and it is working fine.
Hit thanks if you like my post..
Thanks
JAZEEL
So I just applied the registry change in your provxml, and it temporarily works,i.e. it enables the option in the lock and wallpaper screen to disable the password, but next time you sync email the policy is reenforced and you have to set a pin again.
Are you also changing the permissions to that reg key in your xap somehow? haven't got a machine with the dev tools handy to try the actual xap out.
benneh said:
So I just applied the registry change in your provxml, and it temporarily works,i.e. it enables the option in the lock and wallpaper screen to disable the password, but next time you sync email the policy is reenforced and you have to set a pin again.
Are you also changing the permissions to that reg key in your xap somehow? haven't got a machine with the dev tools handy to try the actual xap out.
Click to expand...
Click to collapse
I have tested myself, and it's a permanent solution. It's stays for ever. But I don't know what will happen if you reconfigure the exchange account..
Is there any way to keep a timeout for the lock? I find it very irritating to enter the unlock code every time the device wakes up
@OP, what is the reg key for the change? You must know that to make an XAP?
timmymarsh said:
@OP, what is the reg key for the change? You must know that to make an XAP?
Click to expand...
Click to collapse
This is the key which deploys through the xap..
[HKEY_LOCAL_MACHINE\Security\Policies\Policies]
"00001023"=dword:1
Doesn't Work ...
Hi I tried this unlocker but it is not working for me every time I connect to the computer (Zune and Windows Phone Device Manager) it relocks and have to chevron unlock again.
Any suggestions?
Hello OP,
I have a Sprint HTC Arrive, I got the following message just trying to launch the xap file:
(WARNING)
(The carrier doesn't exist in database. Please contact your carrier for connection setting and go to Setting>cellular>edit
APN for further configuration.)
Theres no APN in my settings that I see, any help would be great, thanks
Striving said:
Hi I tried this unlocker but it is not working for me every time I connect to the computer (Zune and Windows Phone Device Manager) it relocks and have to chevron unlock again.
Any suggestions?
Click to expand...
Click to collapse
This is to disable the lock code on the phone if you have enabled the exchange account which will force to put the lock code.
To permanent developer unlock, please search in xda, someone already posted it before and I have applied that on my HD7.
purian23 said:
Hello OP,
I have a Sprint HTC Arrive, I got the following message just trying to launch the xap file:
(WARNING)
(The carrier doesn't exist in database. Please contact your carrier for connection setting and go to Setting>cellular>edit
APN for further configuration.)
Theres no APN in my settings that I see, any help would be great, thanks
Click to expand...
Click to collapse
I have checked on my HTC HD7 T-Mobile unlocked.. It's working fine..
Search for the reg key for your specific device, and if you find I will help you to deploy it on your device..
jazeelkk said:
This is to disable the lock code on the phone if you have enabled the exchange account which will force to put the lock code.
To permanent developer unlock, please search in xda, someone already posted it before and I have applied that on my HD7.
Click to expand...
Click to collapse
Thanks for the response funny a little while after I realized that is was for something other than the dev unlock. And happily I have gotten have way there I am unlock but have to make sure I remember to put phone in flight mode before connecting it.
rhn said:
is there any way to keep a timeout for the lock? I find it very irritating to enter the unlock code every time the device wakes up
Click to expand...
Click to collapse
i 2nd that!
jazeelkk said:
I have checked on my HTC HD7 T-Mobile unlocked.. It's working fine..
Search for the reg key for your specific device, and if you find I will help you to deploy it on your device..
Click to expand...
Click to collapse
Thanks for your response, the only reg i've ever found to disable the lock on my device is the one you posted and built into your xap file. For some reason the reg doesn't exist in my phone and I can't create it either.
Most likely why you put this together for us. But on my end here, I now have to app to my phone, once I go to launch it I get the message from my previous post, it just wont deploy/launch. Any ideas up i'm for trying.!!
Thank you,
The reg key is protected, so you can't browse to it, but you can still use a tool like advanced explorer to set it by manually specifying the full path and value to change.
I was able to set the value manually like this, but like I mentioned the value is set back automatically next time your phone sync's with exchange. The policy must get checked on every sync with exchange, and gets set back if your exchange server requires a PIN policy.
From what I can ascertain this XAP simply sets that value, so you would have to run this xap after every sync which isn't a great solution.
barrychon said:
i 2nd that!
Click to expand...
Click to collapse
I have tried it as mentioed in some old posts. But it is not working. Only thing I could do is to activate the ON/OFF button with this reg key, so that I can disable the code at any time.
I presume you guys know this already, but just for the heck of it.
You're bypassing a policy. A policy that's most likely you companies' policy. If you do lose your phone and people are able to access files or e-mails that are highly important and/or confidential, you could take the blame for leaking this information.
This could mean the company would sue you for all kinds of things, and it would be very much possible they would fire you. There is a reason the policy is enforced.
I can see why you want to disable the policy, but, as said, there is a reason your company wants that policy on a device that connects to their Exchange server and it's not to annoy you.
EvilWhiteDragon said:
I presume you guys know this already, but just for the heck of it.
You're bypassing a policy. A policy that's most likely you companies' policy. If you do lose your phone and people are able to access files or e-mails that are highly important and/or confidential, you could take the blame for leaking this information.
This could mean the company would sue you for all kinds of things, and it would be very much possible they would fire you. There is a reason the policy is enforced.
I can see why you want to disable the policy, but, as said, there is a reason your company wants that policy on a device that connects to their Exchange server and it's not to annoy you.
Click to expand...
Click to collapse
You are right. I recommend to keep the phone locked always.
It meant for some situation, where we need the phone need to be stayed unlocked. Atleast we should have the option for it.
EvilWhiteDragon said:
I presume you guys know this already, but just for the heck of it.
You're bypassing a policy. A policy that's most likely you companies' policy. If you do lose your phone and people are able to access files or e-mails that are highly important and/or confidential, you could take the blame for leaking this information.
This could mean the company would sue you for all kinds of things, and it would be very much possible they would fire you. There is a reason the policy is enforced.
I can see why you want to disable the policy, but, as said, there is a reason your company wants that policy on a device that connects to their Exchange server and it's not to annoy you.
Click to expand...
Click to collapse
Thanks mum. But seriously...
I think this is a perfect example of a security policy being set which isn't realistic, so users find workarounds. Like when you mandate everyone has a 50 character password which has to be changed once a week, everyone simply ends up writing them down on post it notes.
The PIN code every time you want to use your phone is bloody annoying. It could improved to make it more useable, e.g.:
Only require a PIN if it's been more than 30 minutes since you last entered it.
Only require a PIN when accessing data in exchange like calendar/email.
Specify certain actions which don't require a PIN unlock, e.g. playing music or games.
Anyhow this is mostly irrelevant as this hack is only temporary and the setting reverts so that's a killjoy.
benneh said:
Thanks mum. But seriously...
I think this is a perfect example of a security policy being set which isn't realistic, so users find workarounds. Like when you mandate everyone has a 50 character password which has to be changed once a week, everyone simply ends up writing them down on post it notes.
The PIN code every time you want to use your phone is bloody annoying. It could improved to make it more useable, e.g.:
Only require a PIN if it's been more than 30 minutes since you last entered it.
Only require a PIN when accessing data in exchange like calendar/email.
Specify certain actions which don't require a PIN unlock, e.g. playing music or games.
Anyhow this is mostly irrelevant as this hack is only temporary and the setting reverts so that's a killjoy.
Click to expand...
Click to collapse
Lol, you have a point, but or colleague above is quite correct, the policy is enforced for a reason. At my company, such an offense can mean instant dismissal
(if you use exchange for just calendar and contacts, as i do, a pin is not required to unlock, the policy is only enforced for email strangely enough....)
I agree the Pin should be how it was in WM 6.5 where you could have it only ask after 2 hours or evey 24 in some cases. That way if was a good balance. This business of requiring the PIN every time you look at your phone is crap. I have removed it from my droid device and I am fornunate that my company will not hassle me over it. Still though its a bunch a crap to enter it every 5 minutes.
Hi all,
I have an old Xperia Z1 compact that I have given to my son. It's stock and is not rooted. I wanted to lock the phone down and have found ways to restrict incoming and outgoing calls and restrict app usage. However, all this is pointless as if my son creates a new profile on the phone he can bypass all the restrictions.
I have been searching google and can't find an answer to my question of how to lock the profiles. Is the only way to do it to root the phone?
Abernus69 said:
Hi all,
I have an old Xperia Z1 compact that I have given to my son. It's stock and is not rooted. I wanted to lock the phone down and have found ways to restrict incoming and outgoing calls and restrict app usage. However, all this is pointless as if my son creates a new profile on the phone he can bypass all the restrictions.
I have been searching google and can't find an answer to my question of how to lock the profiles. Is the only way to do it to root the phone?
Click to expand...
Click to collapse
You can do it with root, for sure, but I doubt without. My only thought is to make pin lock for main user, then set up guest user account for your son. I don't think he'll be able to access the phone without factory reset.
Rooting is easy with kingroot, then you just change a database file and add a line to build.prop.