Hello,
I have installed Chainfire3D and at the reboot for installation driver the firmware don't works. I flashed again the firmware with Odin and its returns ok, but to the boot the model name N7100 disappear.
Do you have any suggestions?
I guess you didn't even bother to read the description on Play?
!! For Froyo and Gingerbread ONLY. NOT COMPATIBLE with Honeycomb/Ice Cream Sandwich/Jelly Bean !!
Click to expand...
Click to collapse
FloatingFatMan said:
I guess you didn't even bother to read the description on Play?
Click to expand...
Click to collapse
I'd forgotten about it.
I resolve it flashing the new bootloader.
Related
Is there an updated driver for the adreno on Play Gingerbread 2.3.4 ?
Excuse me for my bad English
Lucas Ringuenet said:
Is there an updated driver for the adreno on Play Gingerbread 2.3.4 ?
Excuse me for my bad English
Click to expand...
Click to collapse
There is an update, but I dont think anyone is able to flash it, or install it. Here is the thread:
http://forum.xda-developers.com/showthread.php?t=1470300
No adreno update for Gingerbread. wait for stable ICS...
jgregoryj1 said:
There is an update, but I dont think anyone is able to flash it, or install it. Here is the thread:
http://forum.xda-developers.com/showthread.php?t=1470300
Click to expand...
Click to collapse
Thank you , but this update is for Samsung devices only
I guess I misread that part about the Samsung, I though ti was saying it was already available for Samsung devices, and thought that it just hadnt been released for our devices. So in a nutshell DO NOT try to flash this file?
jgregoryj1 said:
I guess I misread that part about the Samsung, I though ti was saying it was already available for Samsung devices, and thought that it just hadnt been released for our devices. So in a nutshell DO NOT try to flash this file?
Click to expand...
Click to collapse
I tried flashing it but after turning the phone menu to 5fps : (
Lucas Ringuenet said:
I tried flashing it but after turning the phone menu to 5fps : (
Click to expand...
Click to collapse
Ouch.... that sucks. Hope you had a recovery backup to restore to.
jgregoryj1 said:
Ouch.... that sucks. Hope you had a recovery backup to restore to.
Click to expand...
Click to collapse
Yes, I don't change system file without system backup
I wanted the original rom on my galaxy, without upgrade, the froyo that came with it, just like it was when I bought, it is possible? I updated by kies and regretted, now I can not recover the froyo I had before, if I put some the kies no recognize, wanted the same that came on the phone.
Thanks.
bigjoe2675 said:
Have tried looking for your model forum and posted there....you would be best helped there.
Sent from a closet at Arkham Asylum using Forum Runner.
Click to expand...
Click to collapse
Thanks, but I don't find forum of my model
Must running on gingerbread 2.3.x.
GalaxyAce.ICS said:
Must running on gingerbread 2.3.x.
Click to expand...
Click to collapse
I have gingerbread 2.3.6 but the bluetooth is not working right
If is possible I wanna the froyo
How its work? Cannot connect to others device?
Not too sure, but maybe you could google and download the stock froyo rom and flash it using ODIN?
My Ace 2 is stuck on the "Samsung Galaxy Ace 2" . The Problem was started when I was flashing my ace 2 to Jellybean 4.1, I have problems with like lagging, crashing etc etc now I want to back to Gingerbread or return to stock for short but when I try to flash it. Odin says "Pass" but the phone is stuck on the splash. I can go to Download mode but I can't go to Recovery mode to clear the cache and some resetting. I live in the Philippines incase that you will link me an official gingerbread rom for the galaxy ace 2.
Did you use search option or try reading before starting new thread?
Did you follow that tutorial?:
http://forum.xda-developers.com/showthread.php?t=2141930
AW: Stock on Samsung Logo after flashing back to Gingerbread
There's a "go to gingerbread" thread, where you can find help.
Sent from my GT-I8160 using xda app-developers app
I know
xxmyselfxx said:
there's a "go to gingerbread" thread, where you can find help.
Sent from my gt-i8160 using xda app-developers app
Click to expand...
Click to collapse
it's a fail !
Have you tried the how-to thread already?
It worked !
mo22i said:
Have you tried the how-to thread already?
Click to expand...
Click to collapse
But it's a Russian firmware, can I use my Philippines firmware ?
Jayzee_16 said:
But it's a Russian firmware, can I use my Philippines firmware ?
Click to expand...
Click to collapse
LOL. flash XXLK6 then go to download mode again, flash Philippine software. worked for me.
Already flashed it to DXMA1
Dr01nE said:
LOL. flash XXLK6 then go to download mode again, flash Philippine software. worked for me.
Click to expand...
Click to collapse
BTW, is there going to be a Jellybean update for this device ? I know there's a leaked version but how about the FINAL version ? They say that it will be on March am I right ?
Jayzee_16 said:
BTW, is there going to be a Jellybean update for this device ? I know there's a leaked version but how about the FINAL version ? They say that it will be on March am I right ?
Click to expand...
Click to collapse
Yes. Its not yet released. Hopefully yes.
April/22
Hello folks,
New to N7100, just got one out of the box with this info:
Product Code: MWD
PDA: N7100XXDMC3
CSC: N7100OJVDMC1
MODEM: N7100XXDLK7
Click to expand...
Click to collapse
sure it is still on 4.1.2
so according to sammobile, there is a 4.3 update for my product code since December.
OTA and Kies tells that I have the latest version installed.
im puuure stock...
(sure i know about odin....) but im wondering why it would not update normally?
am i missing something with this device?
thx in advance
Samer
EDIT: Oooops sorry Mod please move it to the right section...
Note 2 sure will satisfy you.
For now don't update yet , read about 4.3 and Knox, later decide if you want to update.
Sent from my GT-N7100 using xda app-developers app
samersh72 said:
Hello folks,
New to N7100, just got one out of the box with this info:
sure it is still on 4.1.2
so according to sammobile, there is a 4.3 update for my product code since December.
OTA and Kies tells that I have the latest version installed.
im puuure stock...
(sure i know about odin....) but im wondering why it would not update normally?
am i missing something with this device?
thx in advance
Samer
EDIT: Oooops sorry Mod please move it to the right section...
Click to expand...
Click to collapse
reboot on download mode and tell us what is written there.
or follow this guide and update with kies
note2nooby said:
Note 2 sure will satisfy you.
For now don't update yet , read about 4.3 and Knox, later decide if you want to update.
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
no intentions to root...
cosmyndemeter said:
reboot on download mode and tell us what is written there.
or follow this guide and update with kies
Click to expand...
Click to collapse
everything is official
no traces for knox
samersh72 said:
everything is official
no traces for knox
Click to expand...
Click to collapse
try the given guide or do a factory reset and see if OTA works
cosmyndemeter said:
try the given guide or do a factory reset and see if OTA works
Click to expand...
Click to collapse
i will give it a try..
if it didnt work, my only way is with odin
is it safe to flash another 4.3 firmware than my product code (region) without facing imei/connectivity issues like sometimes happen with an s4?
thx
regards
samersh72 said:
i will give it a try..
if it didnt work, my only way is with odin
is it safe to flash another 4.3 firmware than my product code (region) without facing imei/connectivity issues like sometimes happen with an s4?
thx
regards
Click to expand...
Click to collapse
flash with odin a stock official firmware 4.3 (that you want) and is safe
HELLO!!
im using a downgraded gio running android 2.2 at the moment.
Can anyone tell me how to root it?
swhackeristahsan said:
HELLO!!
im using a downgraded gio running android 2.2 at the moment.
Can anyone tell me how to root it?
Click to expand...
Click to collapse
I'm not sure how to root froyo but why not upgrade ur phone to 2.3.6? U can root it easily!
rooted it but.......
ironman38102 said:
I'm not sure how to root froyo but why not upgrade ur phone to 2.3.6? U can root it easily!
Click to expand...
Click to collapse
i rooted it but....
After flashing cwm, its stuck on the samsung logo
And no recovery too
swhackeristahsan said:
i rooted it but....
After flashing cwm, its stuck on the samsung logo
And no recovery too
Click to expand...
Click to collapse
Is it possible u flashed wrong recovery? As most recoveries are for Gingerbread
fixed
ironman38102 said:
Is it possible u flashed wrong recovery? As most recoveries are for Gingerbread
Click to expand...
Click to collapse
I just fixed everything and updated to gb. Thanks
btw nice seeing you here on the gio forums
swhackeristahsan said:
I just fixed everything and updated to gb. Thanks
btw nice seeing you here on the gio forums
Click to expand...
Click to collapse
Gio was my first android phone and well ocasionally I visit here. Suprising this phone still has development considering how old it is and anyways now I have Moto G.
ironman38102 said:
Gio was my first android phone and well ocasionally I visit here. Suprising this phone still has development considering how old it is and anyways now I have Moto G.
Click to expand...
Click to collapse
Oh
Sent from my GT-S5660 using XDA Free mobile app