Related
Hello guys!
I am noob right now. I just bought an used rhodium100 and I am trying to install a new rom on it. It has a different language, one that I do not understand.
So I read and read, and I download HardSPL app, RUU, and I wanna get it going when I realize that my phone is not recognized by my computer, nor by a laptop of a friend (both using windows 7). So my question is:
Can it be something wrong software wise that does not allow to connect to the PC or is a hardware thing for sure?
paulielciu said:
Hello guys!
I am noob right now. I just bought an used rhodium100 and I am trying to install a new rom on it. It has a different language, one that I do not understand.
So I read and read, and I download HardSPL app, RUU, and I wanna get it going when I realize that my phone is not recognized by my computer, nor by a laptop of a friend (both using windows 7). So my question is:
Can it be something wrong software wise that does not allow to connect to the PC or is a hardware thing for sure?
Click to expand...
Click to collapse
Are you plugging it in while in bootloader mode, or while in WinMo? Bootloader mode = tri-color screen where you flash.
Honestly, I would flash via SD. Much easier, no need to worry about drivers or any of that nonsense.
Thanks dude for that quick response.
I tried in both ways. As I said, I tried not to be a complete total noob and I read and read.
I tried to flash it via SD card, but I guess the previous owner did not HardSPL it, so when I reboot it in bootloader, it just goes to the screen "Loading..." and it freezes. I've let it over night but it just drained the battery and no progress.
Any other idea?
paulielciu said:
Thanks dude for that quick response.
I tried in both ways. As I said, I tried not to be a complete total noob and I read and read.
I tried to flash it via SD card, but I guess the previous owner did not HardSPL it, so when I reboot it in bootloader, it just goes to the screen "Loading..." and it freezes. I've let it over night but it just drained the battery and no progress.
Any other idea?
Click to expand...
Click to collapse
You should be able to HSPL from the SD. You just can't revert HSPL from SD.
Also, you can tell at the tri-color screen if it's unlocked or not - if you see anything about OliNix, it's unlocked.
well,there was nothing about olinix. So it's not unlocked. Can you tell me how to HSPL it from the sd? Can I then install the ROM via sd card? I do not need to revert the spl.
paulielciu said:
well,there was nothing about olinix. So it's not unlocked. Can you tell me how to HSPL it from the sd? Can I then install the ROM via sd card? I do not need to revert the spl.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=550131
read some of the posts on that thread but I could not find anything about hardspl via micro sd. if it's not too much of a trouble, can you be more specific of what should I do?
paulielciu said:
read some of the posts on that thread but I could not find anything about hardspl via micro sd. if it's not too much of a trouble, can you be more specific of what should I do?
Click to expand...
Click to collapse
It's on that thread. You basically flash HSPL with SD. I could be mistaken, and you can only relock with SD? I can't remember. If I recall correctly, you can only go one-way with flashing via SD....
Nope. Couldn't find anything... guess I better get started to learn Netherlands' language...
paulielciu said:
Nope. Couldn't find anything... guess I better get started to learn Netherlands' language...
Click to expand...
Click to collapse
You should be able to change the language, but I would sort out why you can't flash. That's pretty crippling and IMHO makes a useless device.
arrrghhh said:
You should be able to change the language, but I would sort out why you can't flash. That's pretty crippling and IMHO makes a useless device.
Click to expand...
Click to collapse
Psssst, be quiet, let him learn Netherlands' language
Jackos said:
Psssst, be quiet, let him learn Netherlands' language
Click to expand...
Click to collapse
Come on dude! Please can you tell me how to change the language? any cab file... or how? at least until I can find out if the usb or whatever can be fixed...
Sorry for my dumb joke
I do not have any clue how to fix your problem, it might be a software related, a cable issue or even the MB/connector could fail.
You could translate the rom using a cab file, but this isn't easy and requires a lot of resources and knowledge.
Feel like I am going nuts! Well...what can you do?
I'll stop latter by a service shop...to see what can they do...
Latter posted:
I had somewhat of a breakthrough: I run xdandroid on it, and it was connected to my computer while the android version(linux kernell I believe it is called) was loading and my computer started to install drivers and found a driver for XDA. So I do not believe it is from the connectors. It's something software related. What do you guys think?
Thanks!
paulielciu said:
Feel like I am going nuts! Well...what can you do?
I'll stop latter by a service shop...to see what can they do...
Latter posted:
I had somewhat of a breakthrough: I run xdandroid on it, and it was connected to my computer while the android version(linux kernell I believe it is called) was loading and my computer started to install drivers and found a driver for XDA. So I do not believe it is from the connectors. It's something software related. What do you guys think?
Thanks!
Click to expand...
Click to collapse
XDAndroid is completely different. Please don't mix issues here - Android questions go in Android section, preferably in the build thread you're using. That probably does rule out a hardware issue with the USB port on the phone tho.
I would ensure that you guys have the right setup for flashing. Make sure you try different USB ports, different cables, etc. Triage.
arrrghhh said:
XDAndroid is completely different. Please don't mix issues here - Android questions go in Android section, preferably in the build thread you're using. That probably does rule out a hardware issue with the USB port on the phone tho.
I would ensure that you guys have the right setup for flashing. Make sure you try different USB ports, different cables, etc. Triage.
Click to expand...
Click to collapse
I understand that. I just said that the connectors are OK. Working. If android can connect so should original ROM load, or at least that's what I think it should.
I just hate that neither in active synch nor in bootloader mode can't connect it. Is there any program that facilitates the connection?
paulielciu said:
I understand that. I just said that the connectors are OK. Working. If android can connect so should original ROM load, or at least that's what I think it should.
I just hate that neither in active synch nor in bootloader mode can't connect it. Is there any program that facilitates the connection?
Click to expand...
Click to collapse
Did you try what I suggested...?
There's no program that facilitates the connection, lol.
arrrghhh said:
Did you try what I suggested...?
There's no program that facilitates the connection, lol.
Click to expand...
Click to collapse
I did everything I could think of...
2 usb cables(both working on other devices), and 3 computers...all of them working with other htc devices...
any other ideeas?
paulielciu said:
I did everything I could think of...
2 usb cables(both working on other devices), and 3 computers...all of them working with other htc devices...
any other ideeas?
Click to expand...
Click to collapse
Nothing shows up in Device Manager? Have you tried looking at hidden devices? I've never really had a problem with the computer detecting it.
nothing shows up. Just like it was never or is never connected.
I am running now xdandroid. at least I understand the language.
But I would like the windows mobile OS because I have some programs that only run on it.
Well... is there any way to fully delete the memory? the ROM memory? wipe it clean?
It may help I think... :-?
so odin wont recognize phone nor does my computer i have every drive needed to installed what is going on?
We need more info what are you trying to do? Reboot your computer.
HUH???
curly9 said:
so odin wont recognize phone nor does my computer i have every drive needed to installed what is going on?
Click to expand...
Click to collapse
UHHH what? What the man above said....More info bud. Where did you get your "drive" from? Did you install Kies? Did you check your phone's usb settings?...Throw us a frickin' bone here. Wanna help
Did you try different USB ports? Did you try a different USB cable? Did you threaten your phone/pc with physical violence if it doesn't cooperate? (The last one usually works the best.)
Havek923 said:
Did you try different USB ports? Did you try a different USB cable? Did you threaten your phone/pc with physical violence if it doesn't cooperate? (The last one usually works the best.)
Click to expand...
Click to collapse
Cursing profusely generally helps too.
Sent from my SGSIIE4GTuvwxyz....should I touch my nose or walk a straight line now?
If your computer is x64 try installing them to the other program file directory. Fixed my problem
Sent from my SPH-D710 using XDA App
Good afternoon.
I bought myself this device ASUS MeMO Pad Smart (ME301T).
There was a problem I can not get to the files of the system, you need to restore a single program.
Tell me how to get Root on the device.
I would be very grateful.
nikrzd said:
Good afternoon.
I bought myself this device ASUS MeMO Pad Smart (ME301T).
There was a problem I can not get to the files of the system, you need to restore a single program.
Tell me how to get Root on the device.
I would be very grateful.
Click to expand...
Click to collapse
Hi! Just interested in the issue.
Help!
nikrzd said:
Good afternoon.
I bought myself this device ASUS MeMO Pad Smart (ME301T).
There was a problem I can not get to the files of the system, you need to restore a single program.
Tell me how to get Root on the device.
I would be very grateful.
Click to expand...
Click to collapse
haven't you tried z4root?
I Invite you to see this post which discuss around what's interesting for you
http://forum.xda-developers.com/showthread.php?t=2172581&page=3
mosy7 said:
haven't you tried z4root?
I Invite you to see this post which discuss around what's interesting for you
http://forum.xda-developers.com/showthread.php?t=2172581&page=3
Click to expand...
Click to collapse
Thanks.Not working :crying:
Just picked up this tablet today, wondering if anyone has found anything about rooting it?
I'm searching to buy the original OTG, if someone have one.
Hey guys, I'm still searching for the original OTG adapter, does anyone mind ti sell his, to me?
nikrzd said:
Thanks.Not working :crying:
Click to expand...
Click to collapse
mosy7 said:
haven't you tried z4root?
I Invite you to see this post which discuss around what's interesting for you
http://forum.xda-developers.com/showthread.php?t=2172581&page=3
Click to expand...
Click to collapse
Hi all, I recently bought this tablet as well and I'm quite happy with it except for the fact that I don't have root permissions too.
I tried with SuperOneClick v.2.3.3.0 software but it didn't work as it makes few steps and then it hang as it waits for the device; and yes, USB debugging mode was enabled.
As the majority of the Android devices, if you turn on the device by holding the power button AND the volume key up or down - can't remember which one right now - you can access the recovery boot. Here the options are just 4 and you have 10 seconds to select one of them with the volume rocker.
I managed to start up the pad in Safe Mode (it is written on the bottom left of the screen) but I haven't tried to root it from there.
I'm unsure what the other options stand for and the only other I tried, showed a picture of android and an exclamation mark on a red triangle, I guess it's related to the root permission missing.
Any suggestion on how to root this device would be really appreciated. Thanks in advance.
---------- Post added at 11:58 PM ---------- Previous post was at 11:40 PM ----------
E15i said:
Hey guys, I'm still searching for the original OTG adapter, does anyone mind ti sell his, to me?
Click to expand...
Click to collapse
Hi there, I don't have this cable but have you tried using a non-brand cable with this tablet?
It is my plan to buy a compatible USB OTG cable, I guess it should work fine although not from Asus...at least this is my understanding from a review that I found:
"...The MeMO ME301T has a micro USB port that you'll use for charging with the included 5v 2 amp charger and for USB peripherals with a USB host OTG cable (not included). We tested the USB port with USB flash drives, hard drives and USB game controllers like the XBOX PC controller and a Logitech controller. Portable hard drives didn't get consistently adequate power from the port, but hard drives with external power supplies worked, including NTFS drives. ..."
The source is here: mobiletechreview.com/ubbthreads/showflat.php?Number=44326 (can't yet post external links so just copy & paste it in the browser URL field)
Hope this can help, it would great if you can share your experience about this, shall you have the opportunity to test it. :fingers-crossed:
Rooting with Motochopper
I can confirm that Motochopper gives me root access with the filemanager.
I can also confirm that Motochopper roots the same tablet (still running 4.1.1 on mine). Many thanks.
GHBLoos said:
I can confirm that Motochopper gives me root access with the filemanager.
Click to expand...
Click to collapse
GenghisKhan67 said:
I can also confirm that Motochopper roots the same tablet (still running 4.1.1 on mine). Many thanks.
Click to expand...
Click to collapse
Hi GHBLoos, thanks a lot for your suggestion and along with GenghisKhan67 for your confirmations!
I just tried and it worked perfectly!! :highfive: :highfive: I'm running v.4.1.1 as well.
Let's see if Asus next update to 4.2 will affect the root permission... fingers crossed it won't! :fingers-crossed:
Thanks again to both!
Trying this on my fully updated me301t as soon as I get home!
Edit, I'm running 4.1.1 and am now rooted using motochopper! After updating to 4.2.1 I lost root and even ota root keeper couldn't restore it. But motochopper rooted it again successfully.
Sent from my Galaxy Note 2 using Tapatalk 2
WyoSi said:
...After updating to 4.2.1 ...
Click to expand...
Click to collapse
How did you update to 4.2.1? Did you receive the update from Asus or did you use another mod?
GHBLoos said:
How did you update to 4.2.1? Did you receive the update from Asus or did you use another mod?
Click to expand...
Click to collapse
I got it straight from Asus, I checked for updated before I rooted and there were none available. Then rooted and it told me I had updates available.
So I did the Voodoo ota root keeper install, installed the update, but couldn't recover root. So I just re-ran the root script and boom was rooted on 4.2.1
Sent from my Galaxy Note 2 using Tapatalk 2
Can anyone post the usb drivers and some instructions? Thanks
goochj said:
Can anyone post the usb drivers and some instructions? Thanks
Click to expand...
Click to collapse
My mac loaded it right up. Not sure what drivers for Windows would be necessary
Sent from my Galaxy Note 2 using Tapatalk 2
HiSurfer said:
Hi GHBLoos, thanks a lot for your suggestion and along with GenghisKhan67 for your confirmations!
I just tried and it worked perfectly!! :highfive: :highfive: I'm running v.4.1.1 as well.
Let's see if Asus next update to 4.2 will affect the root permission... fingers crossed it won't! :fingers-crossed:
Thanks again to both!
Click to expand...
Click to collapse
Can you post the usb drivers you used?
I enabled usb debugging (just in the settings by checking it on)
and ran the bat file but the the dos window just stays at "deamon started" .
Im running windows 7
goochj said:
Can you post the usb drivers you used?
I enabled usb debugging (just in the settings by checking it on)
and ran the bat file but the the dos window just stays at "deamon started" .
Im running windows 7
Click to expand...
Click to collapse
You should be able to run adb directly from the directory that contains motochopper.
Run
adb usb
Which will stay the daemon, then
adb devices
To see if it detected your tablet, I had to hit enter (or maybe a cntl-c) once during the 4.1.1 root to get it to continue on from starting the daemon to actually rooting. But that was in my mac.
If your tablet is identified in adb you should be good to go.
I know that doesn't really answer your question, but worth seeing if it detects it, because if it does you have the drivers needed.
Sent from my Galaxy Note 2 using Tapatalk 2
ME301t
goochj said:
Can you post the usb drivers you used?
I enabled usb debugging (just in the settings by checking it on)
and ran the bat file but the the dos window just stays at "deamon started" .
Im running windows 7[/QUOTE
Memo smart 10 drivers available fron Asus website... Asus dot com
Click to expand...
Click to collapse
Hello,
I just bought a On-The-Go USB memory stick and I'd like to see if I can use it on my Desire HD to transfer files, music, etc...
After doing some searching and a bit of reading, I found u need USB host mode drivers.
Currently I have CM11 BR4 rom, am S-Off, and my recovery is TWRP 2.7.10.
Anyone has any input on this?
vegojimbo said:
Hello,
I just bought a On-The-Go USB memory stick and I'd like to see if I can use it on my Desire HD to transfer files, music, etc...
After doing some searching and a bit of reading, I found u need USB host mode drivers.
Currently I have CM11 BR4 rom, am S-Off, and my recovery is TWRP 2.7.10.
Anyone has any input on this?
Click to expand...
Click to collapse
Go download SVHD rom. I believe it has OTG present by default.
Download it from Here
vegojimbo said:
Hello,
I just bought a On-The-Go USB memory stick and I'd like to see if I can use it on my Desire HD to transfer files, music, etc...
After doing some searching and a bit of reading, I found u need USB host mode drivers.
Currently I have CM11 BR4 rom, am S-Off, and my recovery is TWRP 2.7.10.
Anyone has any input on this?
Click to expand...
Click to collapse
If you dont have y-cable, it doesnt work anymore.
mickeyasamoah said:
Go download SVHD rom. I believe it has OTG present by default.
Download it from Here
Click to expand...
Click to collapse
Thx. Too bad the rom you mentioned has been discontinued.
And I am happy with the current rom I have to switch to another one at the moment just to get the USB host option.
So, I have a rooted, unlocked Nexus 7 4G 2013 with TWRP flashed. I did however drop it on the floor earlier today, which made the screen crack and the touchscreen completely unresponsive.
This is all covered in my insurance, so it's not like I'm trying to fix it. I do however need some of the files in it, but since I had a password lock on the startpage, I have no way of getting through it with my touchscreen broken.
So I was wondering if it was possible to remove the lockscreen without doing a wipe that'll delete all my files, or if there's another way to mount the device as a USB drive so I can fetch my files.
Thanks a lot for taking time and reading this far, and thanks in advance for all suggestions.
November13 said:
So, I have a rooted, unlocked Nexus 7 4G 2013 with TWRP flashed. I did however drop it on the floor earlier today, which made the screen crack and the touchscreen completely unresponsive.
This is all covered in my insurance, so it's not like I'm trying to fix it. I do however need some of the files in it, but since I had a password lock on the startpage, I have no way of getting through it with my touchscreen broken.
So I was wondering if it was possible to remove the lockscreen without doing a wipe that'll delete all my files, or if there's another way to mount the device as a USB drive so I can fetch my files.
Thanks a lot for taking time and reading this far, and thanks in advance for all suggestions.
Click to expand...
Click to collapse
Install AROMA filemanager via TWRP google it!
then you can copy your files to a usb drive IF YOU HAVE AN OTG CABLE
malikmoreni said:
Install AROMA filemanager via TWRP google it!
then you can copy your files to a usb drive IF YOU HAVE AN OTG CABLE
Click to expand...
Click to collapse
I don't have an OTG cable, sadly.
November13 said:
I don't have an OTG cable, sadly.
Click to expand...
Click to collapse
Do you have usb debugging enabled?
malikmoreni said:
Do you have usb debugging enabled?
Click to expand...
Click to collapse
Yeah, I do.
November13 said:
I don't have an OTG cable, sadly.
Click to expand...
Click to collapse
November13 said:
Yeah, I do.
Click to expand...
Click to collapse
Wrote a blog post for you http://www.andgeek.com/2014/06/using-adb-to-copy-files-to-from-your.html
follow it if you have ADB on your pc