Related
Trying to update my Epic's modem to EI22, but currently my baseband version is EG22. Unfortunately, I can't get the device back onto EC05...I'm on a Mac, so no Odin, and Heimdall stubbornly refuses to recognize my device. Any way I can flash the EC05 modem using Clockworkmod? Thanks for the help.
ironcladlou said:
Trying to update my Epic's modem to EI22, but currently my baseband version is EG22. Unfortunately, I can't get the device back onto EC05...I'm on a Mac, so no Odin, and Heimdall stubbornly refuses to recognize my device. Any way I can flash the EC05 modem using Clockworkmod? Thanks for the help.
Click to expand...
Click to collapse
Nope. It has to be Odin or Heimdall to access the modem of a CDMA phone. Only modem deltas are flashable. Sorry.
Sent from my SPH-D700 using XDA App
Ok...any suggestions on getting Heimdall to recognize my phone?
ironcladlou said:
Ok...any suggestions on getting Heimdall to recognize my phone?
Click to expand...
Click to collapse
Did you try a different cable like a Blackberry or HTC cable? Did you try different ports? If it is a desktop try the USB ports in the back. You ran the Heimdall setup program and it couldn't find the phone?
I tried the OEM cable, a webOS cable, and a generic monoprice cable. It's a laptop. Tried all ports.
ironcladlou said:
I tried the OEM cable, a webOS cable, and a generic monoprice cable. It's a laptop. Tried all ports.
Click to expand...
Click to collapse
1st opt. -Maybe re-installing the Epic 4G drivers could help you out (at least for ODIN), meanwhile you do that, take your batt. out for a couple of minutes...
2nd -Visit a neighbor or family w/ your phone on hand (& a usb to install the drivers/programs there) to start the process again. (-BEWARE!, NOT EVERYONE HAS A "MAC" & FOR WINDOWS COMES 2 DIFFERENT OP.SIST. 32BIT & 64BIT!, BE SURE TO KNOW WHICH ONE TO INSTALL FIRST!)
3rd -Are you paying monthly for the warranty? (I think you know where I'm going, LOL!).
Sorry about Heimdall but I've never use it so, can't help you there. I really hope that my little knowledge can help you here, =!
Sent from my SPH-D710 using XDA App.
I appreciate the reply. There ain't no warranty on this thing. Bought it on eBay and flashed it to Boost. I'm usually a Windows guy, but my work provided me with a decent Mac, so I handed my Windows machine off to my daughter.
ironcladlou said:
I appreciate the reply. There ain't no warranty on this thing. Bought it on eBay and flashed it to Boost. I'm usually a Windows guy, but my work provided me with a decent Mac, so I handed my Windows machine off to my daughter.
Click to expand...
Click to collapse
I remember seeing some command lines for Heimdall on a Mac somewhere. This is in a different phones forum but may help with it:
http://forum.xda-developers.com/showthread.php?t=1199406
I think you need Ubuntu to get it working properly.
I have upgraded to an S3 from having a Vibrant for years. I rooted and flashed several OS's to my Vibrant in those years without an issue ever. I have been trying to get files transferred to my S3 from my computer for 2 weeks now. The computer has the drivers installed correctly. It is recognized by name when I plug it in (it comes up as SGH-T999, Kies will recognize it too). whenever i try to transfer ANYTHING it stops in the middle of the transfer. just sits there with no further progress to be achieved. This is insanely frustrating. I am unable to root this thing because of the inability to actually transfer.
Things I have tried:
Uninstalling/reinstalling Kies multiple times
Uninstalling all USB device drivers multiple times
Reinstalling drivers through Kies and through Samsung's website multiple times
Factory reset on the phone multiple times (****ing aggravating btw)
Using my old Vibrant cable
Changing between MTP and camera mode... several times
Yelling at it
I have been trying to research how to fix this garbage for weeks now. there is no concrete way to remedy this problem that i have found. every thread about this is littered with the usual "uninstall your driver and reinstall it" nonsense that is the most generic response to anything tech related ever.
What I can tell you is that my phone is definitely getting recognized by anything that can do so. Odin, Kies, My computer, etc etc... it appears that the issue lies in the actual data transfer. As I mentioned, transfers initiate but will lock up mid-process and just hang there infinitely. Same goes with Odin when I try to get it to flash into CWM recovery.
Please, help. any time spent trying to fix this issue is greatly appreciated.
Are you uding the usb cable thst came with the phone?
Have you tried different cables? Or on another computer?
Im guessing your not rooted then?
Try installing the drivers ONLY. get them here:
http://forum.xda-developers.com/showthread.php?t=1728605
Uninstall previous versions of everything first.
What version odin are you using? Use 3.07 from above post if you're not already.
Also try this app
http://forum.xda-developers.com/showthread.php?t=1711009
If you are rooted try SwiFTP or another wireless transfer app.
Sorry to mention drivers again but if you're relying on kies to do that for you it could be the issue.
Sent from my SGH-T999 using xda app-developers app
---------- Post added at 01:41 PM ---------- Previous post was at 01:40 PM ----------
Sorry I missed the part where you mentioned drivers and cable. Damn choppy xda app!
Sent from my SGH-T999 using xda app-developers app
Since you've tried everything else might as well follow this guide and install the drivers through the toolkit.
http://forum.xda-developers.com/showthread.php?p=28175575
I'd also run windows update and check if there's a new bios/drivers for your mobo and usb controller.
If you plug another "foreign" usb device does it install fine?
May not have any bearing whatsoever here but do you have usb debugging checked? And I think I mentioned it in the other post but try a different computer if possible.
You said that this happens when using odin too? As in you start the flash with Odin but it doesn't complete? Or it wont even start? Does it give you any message?
When plugged in in download mode, does Odin show your COM port in the upper left?
Plug in the phone and open device manager. Does it show any errors or anything?
Sent from my SGH-T999 using xda app-developers app
I recommend an app called airdroid. I had issues transferring stuff to and from my Mac and haven't had any problems since I started using the program. Besides it's wireless so I don't have to worry about the wires being a problem
psykhotic said:
Since you've tried everything else might as well follow this guide and install the drivers through the toolkit.
http://forum.xda-developers.com/showthread.php?p=28175575
I'd also run windows update and check if there's a new bios/drivers for your mobo and usb controller.
If you plug another "foreign" usb device does it install fine?
Click to expand...
Click to collapse
everything else works fine from my 6 USB ports (2 USB 3.0 ports as well). The tool kit solution still needs Odin to root. The problem is not detecting the device. it is the transferring of data. Data transfers begin but that's about it. Odin gets to "firmware update start" and then "boot.img" and just hangs there forever. no change. nothing else.
Is there a wireless way to do this? I have purchased Rom Manager but since i can't achieve root it is just useless now. The phone is brand new from the Tmobile store. Not once has it been dropped (to put into perspective how careful i am with my devices, I managed to drop my Vibrant once in ~3 years, which caused no damage, what a great phone that was). I have not been able to read about this same issue anywhere else either...generally its an issue with the PC not recognizing the device but when someone gets it to link up correctly, it works. this is the opposite.
thank you for your ideas so far.
DocHoliday77 said:
May not have any bearing whatsoever here but do you have usb debugging checked? And I think I mentioned it in the other post but try a different computer if possible.
You said that this happens when using odin too? As in you start the flash with Odin but it doesn't complete? Or it wont even start? Does it give you any message?
When plugged in in download mode, does Odin show your COM port in the upper left?
Plug in the phone and open device manager. Does it show any errors or anything?
Click to expand...
Click to collapse
Odin shows the "0:COM" like it should, which means it is able to read that the device is there, it just is unable to do anything after "boot.img", everything that is needed for this to work via the toolkit method is checked (USB debug and unknown sources).
I just got the s3 and had transfer issues too. Turns out my s2 drivers wasn't perfect for it even though it recognizes the device. I used the s3 drivers instead and that helped things a bit with accessing my phone's storage. So i ended up formatting my internal storage and that seems to do the trick for me.
If that doesn't work and odin still gets stuck then try different usb ports also try different wires
Sent from my SGH-T999 using xda app-developers app
Try connecting without the external sdcard in.
What build are you currently on. Since you haven't roited or anything im assuming you're still on either UVALEM or UVALG1. If so try initiating the software update. It should download the ota thatll take you up to UVALH2. Maybe that'll help.
Sent from my SGH-T999 using xda app-developers app
DocHoliday77 said:
Try connecting without the external sdcard in.
What build are you currently on. Since you haven't roited or anything im assuming you're still on either UVALEM or UVALG1. If so try initiating the software update. It should download the ota thatll take you up to UVALH2. Maybe that'll help.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Currently do not have an external SD.
Baseband version T999UVLH2 is what i have running after a fresh phone reset.
Teo032 said:
So i ended up formatting my internal storage and that seems to do the trick for me.
Click to expand...
Click to collapse
Did you do that through terminal? doesn't the single partition mean that it would wipe everything?
Make sure the drivers you are using are the same ones that are in my comment (version).
What are you trying to flash through Odin? If the permissions of the files inside the tar file are not correct, the transfer will hang, and do nothing but give a timeout message after a couple minutes. I learned this the hard way.
In summary:
Use a different USB cable.
Download drivers, Odin, and CWM from my signature. After uninstalling the old drivers manually through devman (be sure to delete them during uninstall), reinstall them from the package you downloaded. Then use Odin to flash CWM. All three of these packages are tested and known to be 100% working. Please don't ignore this step. If I can't verify the validity of your installation sources, I can't rule this out for troubleshooting purposes.
If this doesn't work, it is most likely your computer. Are there any BIOS firmware updates that improve USB compatibility, or USB controller driver updates? The USB 3.0 isn't natively supported on =< Win7, so those are third party drivers. But I will assume you are connected to a USB 2.0 port.
Aerowinder said:
Make sure the drivers you are using are the same ones that are in my comment (version).
What are you trying to flash through Odin? If the permissions of the files inside the tar file are not correct, the transfer will hang, and do nothing but give a timeout message after a couple minutes. I learned this the hard way.
In summary:
Use a different USB cable.
Download drivers, Odin, and CWM from my signature. After uninstalling the old drivers manually through devman (be sure to delete them during uninstall), reinstall them from the package you downloaded. Then use Odin to flash CWM. All three of these packages are tested and known to be 100% working. Please don't ignore this step. If I can't verify the validity of your installation sources, I can't rule this out for troubleshooting purposes.
If this doesn't work, it is most likely your computer. Are there any BIOS firmware updates that improve USB compatibility, or USB controller driver updates? The USB 3.0 isn't natively supported on =< Win7, so those are third party drivers. But I will assume you are connected to a USB 2.0 port.
Click to expand...
Click to collapse
None of that worked. I did find a BIOS upgrade for my mobo that i didnt know was released, flashed it, and transfers still hang. i tried everything from your sig to no avail. i DON'T have access to another computer... BUT i do have Ubutnu running on my comp in conjunction with Win 7 Ultimate 64. can't seem to find too much on non-international S3 stuff for linux.
this has consumed my entire day and i am so frustrated.
Try in safe mode? This sounds really frustrating. I gave up when this happened with my mac. I think someone said it already but I always recommend Airdroid. It's just simpler.
psykhotic said:
Try in safe mode? This sounds really frustrating. I gave up when this happened with my mac. I think someone said it already but I always recommend Airdroid. It's just simpler.
Click to expand...
Click to collapse
airdroid for music transfers, got it. im screwed on the root thing though.
I didn't do it through terminal. I just connect it to the computer. Right click phone's internal storage and clicked format. It was a very quick format.
Sent from my SGH-T999 using xda app-developers app
Teo032 said:
I didn't do it through terminal. I just connect it to the computer. Right click phone's internal storage and clicked format. It was a very quick format.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
so let me get this straight... you plugged the phone in, right clicked on it in a browser window, clicked on format, selected yes to the "hey, this is going to erase everything on the device" warning pop up, and you were able to transfer files no problem after that? no adverse side effects came from this? it sounds like it would brick the phone...
Spaldino said:
so let me get this straight... you plugged the phone in, right clicked on it in a browser window, clicked on format, selected yes to the "hey, this is going to erase everything on the device" warning pop up, and you were able to transfer files no problem after that? no adverse side effects came from this? it sounds like it would brick the phone...
Click to expand...
Click to collapse
Yep that's what i did. That's only the storage partition. There's a system partition that isn't viewable on window explorer
Sent from my SGH-T999 using xda app-developers app
Teo032 said:
Yep that's what i did. That's only the storage partition. There's a system partition that isn't viewable on window explorer
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
didn't work either. i give up. MTP is garbage.
Different computer?
Sent from my SGH-T999 using xda app-developers app
I had these frustrations as well. I finally move where I was connecting the cables. First instinct was the easiest access on my computer. It always failed. I finally decided to try my back usb and it worked it also picked up as a mass storage as well.
Sent from my SGH-T999 using xda app-developers app
Yeah I'm starting to think you might need to use a different computer. Odin detects so it's not drivers.
From my experience with the hangs when i was on the s2. Many also reported this but what helped was different usb ports, wires, or an entirely different computer.
Sent from my SGH-T999 using xda app-developers app
Hello everyone,
I've searched around the forums but have yet to come across anyone with my exact set of problems.
Phone is a Samsung t999v on the Wind network.
I believe the problem started when a restore was done from a back up with no system information. TWRP tells me there is no OS on the phone.
As there isn't an OS zip file on the hard drive I cannot flash from internal card.
Odin 3.04 fails to add tar file of stock rom after repeated attempts.
drivers will not load with G s3 toolkit allowing phone to be recognized.
Connecting the phone to PC while in TWRP or even in download mode and the PC (Windows 7 ultimate wink wink) will show in devices as a modem but doesn't show up in "my computer". Drivers failed to load is the message after connecting the phone.
Last working OS was the latest AOKP build two.
I hoping someone can help me out. I do feel that this information is probably on here somewhere but I've searched with no luck.
I really trying to get an OS onto this phone and hope I haven't screw it up for a friend of mine. These forums have helped do some good works with my phone and phones of my friends that I guess I ended up thinking I knew more than I did. I should have stock with clockworkr which didn't have the option to back up without system. safer for a dummy.
I appreciate any and all comments.
nur.
Did you don't download the drivers from Samsung website?
Sent from my SGH-T999 using xda premium
vopezy said:
Did you don't download the drivers from Samsung website?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Yes I can download them from the website but at times the device is still not recognized. For some reason this happens with all my Samsung products. My PC often time does not recognize them. It started months ago with my 10.1 Tab and them my i727 and this t999v. I have to contect the usb and disconnect several time before they'll connect even changing ports. But now they don't connect at all.
Since you have twrp, why don't you just flash a ROM?
Sent from my SGH-T999 using xda premium
serio22 said:
Since you have twrp, why don't you just flash a ROM?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I would love to but how do I get the ROM on to the phone? The phone is not being recognized by computer. I have an sd car but my other samsung phone isn't recognized by the pc either.
Uninstall the drivers you have installed (the Samsung ones) and uninstall Kies if you have that installed.
Install the drivers from my signature. They are an older version. I use them because all of the newer ones do exactly what you are describing. The PC won't see the device, etc.
If all else fails buy a card reader. One of the 10+ in 1 sd card readers. Probably should have one of those anyway; just a thought.
Aerowinder said:
Uninstall the drivers you have installed (the Samsung ones) and uninstall Kies if you have that installed.
Install the drivers from my signature. They are an older version. I use them because all of the newer ones do exactly what you are describing. The PC won't see the device, etc.
If all else fails buy a card reader. One of the 10+ in 1 sd card readers. Probably should have one of those anyway; just a thought.
Click to expand...
Click to collapse
Thanks for the advise. I'm going to go grab a micro sd reader now, hopefully. The drivers from your signature didn't fail to install as well. Can anyone think of what the source of the issue is. My drivers failing to install is happening on both of my PC's. I didn't try to install the older drivers on my second pc however.
nurlord said:
I would love to but how do I get the ROM on to the phone? The phone is not being recognized by computer. I have an sd car but my other samsung phone isn't recognized by the pc either.
Click to expand...
Click to collapse
You can download the ROM on another phone and transfer it to an SD card, after that you can swap it to the one with no os and flash it
Sent from my SGH-T999 using xda premium
The card reader fixed it. Thanks everyone for helping me out. No more lurking for me.
P.S
If anyone has any additional insight into my driver issues I'm all ears.
I have the same problem with my phone being recognized. I will sit there and plug and unplug the cable into the same usb port repeatedly, and eventually it'll be recognized.
Sent from my SGH-T999 using Tapatalk 2
Did the drivers fail to install from the installation package or when you plugged the device in after that installation? Also, are you in MTP or PTP mode?
nurlord said:
The card reader fixed it. Thanks everyone for helping me out. No more lurking for me.
P.S
If anyone has any additional insight into my driver issues I'm all ears.
Click to expand...
Click to collapse
Go here:
http://forum.xda-developers.com/showthread.php?p=32906335#post32906335
Follow ALL the steps in order EXACTLY.
You will see it works for you. It has for every other person that I worked on their machines for...
If it does not, you did something wrong in following the steps.
if you do it exactly, it WILL work!
Good Luck!
Aloha
ports amethyz
bfranklin1986 said:
I have the same problem with my phone being recognized. I will sit there and plug and unplug the cable into the same usb port repeatedly, and eventually it'll be recognized.
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
That is what I use to do but that no longer works.
Aerowinder said:
Did the drivers fail to install from the installation package or when you plugged the device in after that installation? Also, are you in MTP or PTP mode?
Click to expand...
Click to collapse
It says MTP mode failed so I guess that's the mode. Both have happened but usually the fail happens after I plug in the device.
bobolinko said:
Go here:
http://forum.xda-developers.com/showthread.php?p=32906335#post32906335
Follow ALL the steps in order EXACTLY.
You will see it works for you. It has for every other person that I worked on their machines for...
If it does not, you did something wrong in following the steps.
if you do it exactly, it WILL work!
Good Luck!
Aloha
Click to expand...
Click to collapse
Appreciate it. I'll try it out now.
I'd get a new cable
Sent from my SGH-T999 using xda premium
nurlord said:
P.S
If anyone has any additional insight into my driver issues I'm all ears.
Click to expand...
Click to collapse
Sometimes peoples use port locate on the front panel of their PC.... Always use the usb on the back...... Thoses on the motherboard.
If it's not your case.... Try to switch port..
Sent from my SGH-T999 using Tapatalk 2
damn it im in the same position as you
i wiped my phone as well no os
i put the sd card into my blackberry copied the rom on to the phone but he phone wont pick it up
wont recongize my phone when i plug it in as well -_-
bobolinko said:
Go here:
http://forum.xda-developers.com/showthread.php?p=32906335#post32906335
Follow ALL the steps in order EXACTLY.
You will see it works for you. It has for every other person that I worked on their machines for...
If it does not, you did something wrong in following the steps.
if you do it exactly, it WILL work!
Good Luck!
Aloha
Click to expand...
Click to collapse
I followed all the steps exactly and the problem still persists. KIES fails at installing drivers and same happens when I connect the phone. The only place I can there being an error was that I replaced and copied the files in Windows INF as the new files had the same names as the old ones. As for that everything else I followed the steps exactly with no luck.
Android_Monsters said:
I'd get a new cable
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Might be worth a shot but it doesn't seem likely that it's a cable issue. The cable is effectively new and PC does recognize that I'm connecting a device.
cuzmonote said:
Sometimes peoples use port locate on the front panel of their PC.... Always use the usb on the back...... Thoses on the motherboard.
If it's not your case.... Try to switch port..
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
Trying that now but we'll see.
sky14 said:
damn it im in the same position as you
i wiped my phone as well no os
i put the sd card into my blackberry copied the rom on to the phone but he phone wont pick it up
wont recongize my phone when i plug it in as well -_-
Click to expand...
Click to collapse
What recovery are you using to try and read the SD card?
Okay i have seen similar posts around, and I apologize if this bothers anyone but when I post a thread asking for help, its because I've tried most solutions and have gotten nowhere. I recently bought one.of.these devices and I have to say for an old 1GHz device, its pretty darn smooth! (Got it for my girl who broke her phone. Cost $20 MINT screen, and some scuffs.on the trim believe it or not, fully functional, clean ESN)
I love for all devices in the house to be rooted and off that dreaded Gingerbread android. I have been stuck since i got it trying to use ODIN to flash CWM, and root it to flash a JB based rom. Problem is i installed the drivers, got the ODIN version required, have the CWM tar file, etc, the phone gets detected while on in ADB, normal file transfer way and so on. BUT Download Mode? Nope, i get the dreaded "Unknown Device" issue.
Now as I always read before annoying others, I read that switching the USB cable helps. I've tried 8 USB cables, and no go. 2 Samsungs (i read those are #1 NO GOs), 3 LG cables (device doesnt appear at all), and 3 non brand. No good.
I know Mobile Odin wont work, I rooted it using Framaroot.apk for now, but I need CWM for the rom flashing part.
So now that its 2013, is there really no other way other than ODIN? I tried using ROM Manager, it flashes but doesnt do a thing except boot into stock recovery (miracle no bricks or bootlooping). If I had Linux on my PC, will it get detected or its just the darn cable?
OR is there a specific USB cable brand I should go for that is guaranteed to work? I dont mind buying it just have been waiting to make sure.
Any help or advice is greatly appreciated.
Most people recommend using a BlackBerry cable
Sent from my SPH-D700 using Tapatalk 2
jeffreyjicha said:
Most people recommend using a BlackBerry cable
Sent from my SPH-D700 using Tapatalk 2
Click to expand...
Click to collapse
Thank GOSH I read your response in time! I am currently at BestBuy and was going to buy a totally different brand USB. Hopefully they have them here.
Crossvxm said:
Thank GOSH I read your response in time! I am currently at BestBuy and was going to buy a totally different brand USB. Hopefully they have them here.
Click to expand...
Click to collapse
I use this cable and have had zero issues. http://www.monoprice.com/products/p...=10303&cs_id=1030307&p_id=5458&seq=1&format=2
Well there's good news and bad.
Got an official BlackBerry USB cable.
Bad is the device is STILL not recognized.
The drivers have been properly installed, there is no updating the drivers manually, effing Windows won't let me. What the hell can I do now?
If only Mobile Odin worked, or there were other methods, I wouldn't be going thru this mess...
Like where did I go wrong?
I would swap out Windows to Linux, but I don't see how that will get the device detected.
Matter of fact I was trying to install a Linux based OS from my flash drivd, and it corrupted it. Theres 8gb Ill never see again...
Any other ideas? Will Linux pick up the device?
EDIT: This USB unlike the others BRIEFLY detects it as a USB Device, then goes back to unknown when I uninstall it thru Device Manager
Crossvxm said:
Well there's good news and bad.
Got an official BlackBerry USB cable.
Bad is the device is STILL not recognized.
The drivers have been properly installed, there is no updating the drivers manually, effing Windows won't let me. What the hell can I do now?
If only Mobile Odin worked, or there were other methods, I wouldn't be going thru this mess...
Like where did I go wrong?
I would swap out Windows to Linux, but I don't see how that will get the device detected.
Matter of fact I was trying to install a Linux based OS from my flash drivd, and it corrupted it. Theres 8gb Ill never see again...
Any other ideas? Will Linux pick up the device?
EDIT: This USB unlike the others BRIEFLY detects it as a USB Device, then goes back to unknown when I uninstall it thru Device Manager
Click to expand...
Click to collapse
Are you plugging into a port directly on the motherboard? (IE: A port on the back of the machine.) Using an emulated port or hub can cause this at times.
FYI, there are 2 drivers. One is for when the phone is fully booted in Android. The other is the driver when in download mode. Have you tried using another machine?
Sent from my Nexus 7 using Tapatalk 2
I think your issue is driver related. I had similiar issues and updated the wiki with the drivers that ended up working for me.
Sent from my SPH-D700 using xda app-developers app
Towel Root method won't run because my phone cancels it's installation. Odin isn't recognizing my device. Then I tried the Terminal Emulator method, but no matter which directory I put the files into it always gets to a point where I get an error. Where am I going wrong? Any ideas? If you need anymore info to determine a solution, please let me know.
Sent from my SPH-L710T
Does your computer even see it as a device? Like a USB external drive?
Are you in download mode when trying odin?
Also, when that happens to me, it is because I'm using a cheap cable that does not support data. You might want to try a good quality microusb cable.
Can your phone change via your usb port
meeniemuffin said:
Towel Root method won't run because my phone cancels it's installation. Odin isn't recognizing my device. Then I tried the Terminal Emulator method, but no matter which directory I put the files into it always gets to a point where I get an error. Where am I going wrong? Any ideas? If you need anymore info to determine a solution, please let me know.
Sent from my SPH-L710T
Click to expand...
Click to collapse
Your phone is not an SPH-L710. You have an SPH-L710T. This means that not everything L710 will work on your phone, so just be aware of that. Do you have USB Debugging enabled? Also, what carrier are you using?
Powered_By_Linux said:
Your phone is not an SPH-L710. You have an SPH-L710T. This means that not everything L710 will work on your phone, so just be aware of that. Do you have USB Debugging enabled? Also, what carrier are you using?
Click to expand...
Click to collapse
I am aware of this. I am on Boost Mobile, are there any keywords I should know to determine compatibility?
lvpre said:
Does your computer even see it as a device? Like a USB external drive?
Are you in download mode when trying odin?
Also, when that happens to me, it is because I'm using a cheap cable that does not support data. You might want to try a good quality microusb cable.
Can your phone change via your usb port
Click to expand...
Click to collapse
My computer does recognize my device and it just hit me that I am supposed to be in Download Mode. Ill try this method when I am less afraid of downloading Odin, last time I downloaded a legitimate-looking virus. Backed up and restored but now I'm iffy. Also, I have good quality cable, its no problem for me.
meeniemuffin said:
I am aware of this. I am on Boost Mobile, are there any keywords I should know to determine compatibility?
My computer does recognize my device and it just hit me that I am supposed to be in Download Mode. Ill try this method when I am less afraid of downloading Odin, last time I downloaded a legitimate-looking virus. Backed up and restored but now I'm iffy. Also, I have good quality cable, its no problem for me.
Click to expand...
Click to collapse
Just making sure . You are correct in saying that you have to be in download mode. Sadly, Odin is pretty shifty. As an alternative you could try Heimdall: http://glassechidna.com.au/heimdall/ It didn't work when I rooted my SPH-L710 a few months back, and I had to find an Odin download, but it's worth a shot.
As a side note (if you don't know about it already) this seems to be a pretty good resource for your phone.
Best of luck!
Powered_By_Linux said:
Just making sure . You are correct in saying that you have to be in download mode. Sadly, Odin is pretty shifty. As an alternative you could try Heimdall: http://glassechidna.com.au/heimdall/ It didn't work when I rooted my SPH-L710 a few months back, and I had to find an Odin download, but it's worth a shot.
As a side note (if you don't know about it already) this seems to be a pretty good resource for your phone.
Best of luck!
Click to expand...
Click to collapse
Did NOT know about that link, which I found to be pretty helpful, thanks for the guidance.