I'm surprised I didn't see this question already when I searched. Maybe I am blind.
I want to get a One X (or maybe a One X+ depending on price and release date), I have been dragging my feet because I swap phones often (I have a really old Nokia GAIT phone that pop my current SIM into so I can I take that phone with me out on my JetSki so I won't ruin a good phone and I keep my teeny Aria in my bag for when my Inspire battery dies).
I have seen adaptors for sale online and I've seen videos how to make adaptors, but I have seen mixed reviews on them. Does anyone here have personal experience?
Thank you.
The two SIMs are the same thickness but the adaptor has to increase that, so you get mixed results depending on how the SIM fits into the phone and how much space there is.
I tried several before finding one that worked in my phone.
Like the poster above me said, it depends on the adapter and phone. I bought a cheap one from a local shop for a couple of dollars, looks very similar to those found on eBay, it has a very thin plastic layer where the micro SIM fits, so doesn’t add much thickness. Has worked fine with the few devices I tested so far (2 phones and a USB mobile broadband modem). With one of the phones it was a very tight fit, but managed to push it in and take it out. but be careful not to put too mush pressure, otherwise you might not be able to get it out.
When you cut your regular sim down to a micro sim, save the pieces and just tape it back to together. Worked fine for me. Make sure you use a strong tape though, otherwise you'll have pieces of sim card stuck in your slot.
Go to Vodafone (or your local carrier's store) when I went back to regular SIM, all I had to do was ask, and they gave me a free adapter. Worth asking
Otherwise, I think they go for 50 cents or maybe 1 euro at your local electronics store.
BenPope said:
The two SIMs are the same thickness but the adaptor has to increase that, so you get mixed results depending on how the SIM fits into the phone and how much space there is.
I tried several before finding one that worked in my phone.
Click to expand...
Click to collapse
PhoenixFx said:
Like the poster above me said, it depends on the adapter and phone. I bought a cheap one from a local shop for a couple of dollars, looks very similar to those found on eBay, it has a very thin plastic layer where the micro SIM fits, so doesn’t add much thickness. Has worked fine with the few devices I tested so far (2 phones and a USB mobile broadband modem). With one of the phones it was a very tight fit, but managed to push it in and take it out. but be careful not to put too mush pressure, otherwise you might not be able to get it out.
Click to expand...
Click to collapse
That's exactly the kind of concerns I have. Can either of you recommend what worked for you?
Thanks!
gtmaster303 said:
When you cut your regular sim down to a micro sim, save the pieces and just tape it back to together. Worked fine for me. Make sure you use a strong tape though, otherwise you'll have pieces of sim card stuck in your slot.
Click to expand...
Click to collapse
Presumably a new phone would come with the proper SIM so I wouldn't have to cut mine (I have a small stack of old ones from every new phone purchase). But even if I did have to cut my own, I'd rather try to avoid the tape idea because of that exact reason.
Quiksilver78 said:
Go to Vodafone (or your local carrier's store) when I went back to regular SIM, all I had to do was ask, and they gave me a free adapter. Worth asking
Otherwise, I think they go for 50 cents or maybe 1 euro at your local electronics store.
Click to expand...
Click to collapse
Hmm. I hadn't even thought of asking my AT&T store about that. The girl I usually talk to there is awesome so if there is a way to get one from them, she would know. Thanks for the idea!
struff said:
That's exactly the kind of concerns I have. Can either of you recommend what worked for you?
Thanks!
Click to expand...
Click to collapse
I just wandered into a local phone accessory store and told them I'd buy one if it worked, she wasn't pleased but by about the third one we got one that fitted.
My microsim came as a pop out from a normal size sim and can just be placed back to work as full size sim
Related
just wondering is their such a product which looks and acts like a normal wallet but can hold my dopod p800w?
thanks, Mackz
there are loads on ebay
still can find any....any links?
What a great idea. I would also like to get one. I did a search on eBay and all I got was stuff for the G1.
Here's one option:
http://www.eforcity.com/universal-w...edit-card-holder-clip-large-cothxxxxlc40.html
glam said:
Here's one option:
http://www.eforcity.com/universal-w...edit-card-holder-clip-large-cothxxxxlc40.html
Click to expand...
Click to collapse
I bought one of these and the concept is good but the quality is rubbish.
As I'm out of the office a lot I used an extended battery and my Dopod P800W still fits in the case section of this one. Unfortunately the credit card slots are super small and thin, Getting a card is in an accomplishment, getting it out again without using pliers is near impossible. Yes it will probably loosen up over time but I'll probably snap a card first.
The slot with the window (for an ID card or license) is shorter than a standard card so the end of the card sticks out just short of the zip. Last complaint is the material is a very cheap fake leather.
If the same design was made properly it would suit me well as it could carry my frequently used travel cards such as corporate credit card, hire car ID, drivers license, frequently flyer membership card all with my phone.
If you know of other options to this one please post.
Here are some other cases but I do not know if they will fit the Artemis.
Link
Link
Link
Thanks.
Your 3rd link is for the case I bought and it really is rubbish.
1st link is for a different size phone.
2nd link only has the one card slot.
Thanks anyway.
Funny, i had the same problem exactley!!!
Try this Chanel Line Cambon Zipped wallet. If you dont like this specific model, you have planty of more!!!
Artemis Wallet.
Best ones I have seen are from Krusell
They are expensive, but the leather is really good and the manufacturing is excellent.
http://www.krusell.se/
I have seen them online in several places, but also in stock in local electronics stores in my city at a much more reasonable price. Not for all telephone models, tough...
Has anyone used this case? I bought the kickstand case and after 3 weeks the bottom half of the kickstand broke off. I was thinking of getting the credit card case because in L.A. we have these things called Tap cards for bus passes. You just tap it onto a sensor and it'd be easier for me to tap my phone and put the card in the slots. Is the case fine? Is the plastic between the slots and the back of the thick or just right for sensors to maybe reach it?
Sorry for writing so much!
Thank You.
Sent from my HTC Glacier using XDA App
I don't know about those cases but that's a great idea! I wouldn't mind having one for a pay pass debit card. They work on the same concept.
Sent from Royal Glacier 2.1 powered HTC MyTouch4G using XDA App.
i have the case mate for the mt4g. it hold up to 3 cards. works amazingly. not sure about your bus pass though
I've used that case since December of last year. It's a really nice case and it holds 2 cards, but I managed to fit one more, lol. As far as the Tap card goes, I'm not sure. Never tried it. I always had the Tap in my pocket. Not so sure if it'll work since it is a little thick.
I have one really convenient
Where did you guys find this case with credit card slot?
please link.
^google "casemate mytouch 4g"
I love mine, had it on since I bought phone last year. It is only good for 2 cards though, I have found 3 makes it too tight to pull them out. It has literally saved my phone from a lot of damage.
lion766 said:
I love mine, had it on since I bought phone last year. It is only good for 2 cards though, I have found 3 makes it too tight to pull them out. It has literally saved my phone from a lot of damage.
Click to expand...
Click to collapse
Planning on picking this up at local TMO store today after work. They have em on sale for $15, and my best skins ever is peeling off, so I figured why not? I like the idea of the card holder...any more updated reviews on this case? Does it protect decently? Not too bulky?
UPDATE in case anyone reads this thread: The $15 price was only for online TMO, in-store was still $35. But I wound up getting it on Amazon for $10
Quick review: Love the case. It adds a little bulk to the back of the phone (due to the slot for cards), but not much - and I consider it worth it because I can fit: my drivers license, my bank card, my metro pass, and my gym key card all in the space provided; which means I don't have to carry my wallet around, so the slight bump in the back of the phone is worth it to me. (Side note that makes this case more beneficial: there's growing evidence to support that carrying a wallet in your back pocket can lead to serious back problems).
Can anyone recommend a flip case in which i can also put in credit cards and money (notes) aswell ?
Kld
Tricked Fauxed Sprint One
Cj719 said:
Kld
Tricked Fauxed Sprint One
Click to expand...
Click to collapse
Kld can hold just one and not really spave for notes.
pcigre said:
Kld can hold just one and not really spave for notes.
Click to expand...
Click to collapse
I have two cases: an EasyAcc (http://www.amazon.com/gp/product/B00CALPJOY/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1) and an Evecase (http://www.amazon.com/gp/product/B00BQN4UII/ref=oh_details_o02_s00_i00?ie=UTF8&psc=1). I think I prefer the EasyAcc-- it really does feel nice in the hand, doesn't add too much heft, and closes rather cleverly. It's also an excellent stand. However, while it's easy to snap the phone in and out of, that comes at the cost of capacity. It'll take one card, and if you push the card too far back in, it won't close well (although it's still a good case).
The Evecase is more like your standard "wallet," with three card slots and a pocket in the back for cash. Since the closing mechanism is a full clasp, it'll take whatever you stuff in within reason. I personally can't stand button clasps (they flap around), but it might fit your needs.
I would be wary of credit card cases.. I've seen a couple in person and they have ended up leaving marks on the screen after awhile.
You can pick up these little right angle adaptors on that well known auction site very cheaply. Just do a search for "Vertical Right Angled 90D USB A Female to Micro B Male". Along with a Cruzer Fit tiny USB stick, they make an alternative neat way of extending the storage on rooted devices. I have several for movies now. This is one with the Cruzer Fit inserted: click for a larger image.
Brilliant! Definitely gonna get one of those.
This is my current setup and I hate it, one bad bump in the wrong direction could result in a busted microUSB port
AlderCass said:
Brilliant! Definitely gonna get one of those.
This is my current setup and I hate it, one bad bump in the wrong direction could result in a busted microUSB port
Click to expand...
Click to collapse
Yes, I have one of those too! And a couple of the ones with dangly wires. But the right angled adaptor is a lot more stable. Delivery from HK took a couple of weeks.
Quick question about the Cruzer Fit as well actually - does it get very hot when in use? Mine is a different brand, I forget what, and it gets worryingly hot whenever I use it, presumably because it's so small.
I think this is alot neater .....I preordered 2 for the wife and I . They are shipping within the next week or so. Solid build quality.
http://forum.xda-developers.com/showthread.php?t=2421184
EDIT: $12 each plus shipping.
AlderCass said:
Quick question about the Cruzer Fit as well actually - does it get very hot when in use? Mine is a different brand, I forget what, and it gets worryingly hot whenever I use it, presumably because it's so small.
Click to expand...
Click to collapse
I can't detect the Cruzers even getting warm. Mind you, they are only doing serial reads of pre-written video files so there is no writing involved.
DC_MTP said:
I think this is alot neater .....I preordered 2 for the wife and I . They are shipping within the next week or so. Solid build quality.
http://forum.xda-developers.com/showthread.php?t=2421184
EDIT: $12 each plus shipping.
Click to expand...
Click to collapse
Yes I looked at those. But microsd cards are so easy to lose if you want to work with several, fine if it's just one permanently fitted card. With a Cruzer Fit permanently attached, these devices form a nice little module and end up cheaper overall: they're less than £1 post paid to the UK, and I would assume similar to the USA.
Some people are starting to make micro usb memory sticks, but they seem to be taking the line that they have a standard USB on one end and the micro USB at the other, which makes them rather clumsy. They're also silly prices at the moment!
I agree on the micro sd card reader being a better option. This looks like a nice option for those with external hard drives.
Sent from my SCH-I605 using xda app-developers app
Does anyone know where I can buy a dual SIM tray that actually fits as good as the original one? I bought one off of Sunsky-online but it won't fit in all the way, it stands out of the case by half a millimeter or so. Don't really get why that is, in terms of size it looks completely identical to the original one.
The plastic cover is a little bit longer. I file a little the part with a nile file (The two ends trying to respect the curvature) and now it fit perfectly.
Will be 0.1 mm not more.....
@dgardel what a pleasant surprise, it was indeed actually quite easy once I knew what I had to do, thanks for the hint!
I just got mine from Sunsky and it's absolutely not worth it. Not only do you need to sand down the edges like you guys said but the rubber that supposed to be on the inside to provide some water resistance is actually just 3D printed and painted plastic. Honestly anyone who wants dual sim try finding another source because these scammers are going to get your phone wrecked.
MeTheRebel said:
I just got mine from Sunsky and it's absolutely not worth it. Not only do you need to sand down the edges like you guys said but the rubber that supposed to be on the inside to provide some water resistance is actually just 3D printed and painted plastic. Honestly anyone who wants dual sim try finding another source because these scammers are going to get your phone wrecked.
Click to expand...
Click to collapse
Where to get one that properly fits!
Anyone knows where I can buy a dual sim tray that fits?
roninxt said:
Anyone knows where I can buy a dual sim tray that fits?
Click to expand...
Click to collapse
i got 2 from sunsky and they both fit perfectly. i was surprised after reading many comments about bad fitting earlier.
[$0.79] For OPPO Find X2 Pro SIM Card Tray + SIM Card Tray (Black)
1. SIM card tray + SIM card tray for OPPO Find X2 Pro. 2. Replace your broken or unworkable one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to...
www.sunsky-online.com