Does anyone have any recommendations for a good Screen Protector to use with my Qcell Extended Battery TPU Case? I want to try and avoId havIng the corners peal. Thanks.
My Glasszone doesn't have lift with the QCell case. Bit pricey though
http://www.ebay.com/itm/28093403992...eName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
I have the Skinomi screen protector and Diztronic TPU case. It did pop 2 corners up but I took my dremel tool and lightly sanded the sharp edge off the case and made it at an angle. You can't tell I did anything and worked like a charm.
Related
Hey guys 2 of my favorite cases so far have been the Incipio NGP and the matte black diztronic tpu. I had the SGP curved protector on and the NGP and it was the perfect combo. But I got some marks in the protector and there was a hair under it that had been bugging me so I decided to take it off and use the second curved protector (they come with 2) and my NGP now seems to push the corners of this one up. Not sure why but my other one was fine. Anways, I took off my battery cover and it fits fine in both cases but it fits tighter in the diztronic. Do you guys think its safe to use a tpu case without a battery cover? My main concern is dust/debris getting inside.
On a side note, anyone else use the curved protector and NGP combo and did yours push up the edge? Trying to decide if I should get a replacement or if I just got lucky that it didn't ruin my protector the first time.
Sent from my SGH-I747M using xda premium
Just like the title says, I recently scratched my screen protector which is pretty noticeable. I noticed the one that came with the Otter Box commuter case doesn't cover the entire screen because the rubber part covers the edges. Is there a particular screen protector I should use? Thx!
Sent from my SCH-I535 using xda app-developers app
i don't think there's a screen protector that will cover the entire front part (unless you're gonna cover the entire phone like some of the wrap protectors out there.
The spigen curved crystal is compatible with Commuter. But the sp only compatible with Commuter as commuter had bigger lips to cover the front screen. If u wish to change others case, choose the spigen ultra crystal.
Sent from my GT-I9300 using xda premium
I've used Spigen, Zagg and cheapo screen protectors (2/$10 dry-apply) with my Commuter cases.
Basically, if it's a flexible plastic screen protector it should fit under the silicone undershell of the Commuter. Just be careful when putting on the Commuter case - make sure you don't fold or "roll up" the screen protector as you put on the silicone. Once you have the silicone on, "flip" (just a quick lift/release) the lip of the silicone around the screen to make sure there's no pressure on the screen protector trying to side it around and push wrinkles into it. Then carefully put the outer shell on being careful to shift the silicone as little as possible.
Probably more than was needed to be said but hey, I called off work sick today.
I bought the Spigen Curved Glass screen protector, and I absolutely love the fit. I have zero bubbles anywhere on my screen and everything is laying flat. However, the case I have keeps making the sides of the screen protector come up. Here is the case I have now (which I freaking love):
http://tpu-cases.com/index.php?main...id=275&zenid=1bb0920acd2cedd0634ccf906fa15569
Is there anyone else that has this screen protector and can recommend a case that doesn't make the sides of the protector come up?
WrlsFanatic said:
I bought the Spigen Curved Glass screen protector, and I absolutely love the fit. I have zero bubbles anywhere on my screen and everything is laying flat. However, the case I have keeps making the sides of the screen protector come up. Here is the case I have now (which I freaking love):
http://tpu-cases.com/index.php?main...id=275&zenid=1bb0920acd2cedd0634ccf906fa15569
Is there anyone else that has this screen protector and can recommend a case that doesn't make the sides of the protector come up?
Click to expand...
Click to collapse
I use the Spigen curved crystal screen protector also. Here are the cases that I have that work without peeling the edges up:
UAG
Element Eclipse
Spigen Modello - tpu
j76ms said:
I use the Spigen curved crystal screen protector also. Here are the cases that I have that work without peeling the edges up:
UAG
Element Eclipse
Spigen Modello - tpu
Click to expand...
Click to collapse
Thanks for your response! The UAG is nice, but too bulky. The Element Eclipse looks amazing, but I'll pay $65 for a case the same day I win a lottery. As for Spigen, I don't see a Modello for the SGS3, but I don't like any of their cases. I'd get a flip cover case, but the ones I've seen have no protection for the top or bottom of the phone.
I do very much appreciate your feedback, I'm just hoping for a case that I like and that works with this protector.
The Rock Quicksand has been great for me.
Sent from my SPH-L710 using Tapatalk 2
FYI, I decided to try the Seidio Surface case, thinking that if I could slide the case on it wouldn't be a problem. Fail. Totally pulls the sides of the protector up. Unless I can find a similar, minimalist case that will work with this screen protector, I'll have to just get a different protector.
A little old, but all the cases in on my crappy blog worked fine with the Curved Glass.
Including all metal bumpers.
Spigen Ultra Thin Air
I didn't even think about this before I bought the ZeroLemon battery - that includes the TPU case over the battery - but the lip of the case peeled my Spigen, crystal screen-protector. I modified the shape of it to avoid this, but now it looks horrendous. Could anyone recommend a nice, smooth (and preferably cheap) screen protector that doesn't extend to the edges and will work with the ZeroLemon case?
I looked into the ILoome Glass screen protector, and if it didn't have those incredibly obvious grid-dots, I would have bought it.
My skinomi screen protector fits exactly on the Nexus 5 glass leaving zero margins or gaps to the edge.
Currently using a Rearth ringke slim case with the Nexus. It fits perfectly and doesn't push on my screen protector, but I am looking for something with more drop protection. Noticed all of the TPU or thicker bumper style cases wrap around the edge of screen a bit and will likely bubble or lift my screen protector up.
Anyone found a durable case that is screen protector friendly?
Momotani-Hitoshi said:
My skinomi screen protector fits exactly on the Nexus 5 glass leaving zero margins or gaps to the edge.
Currently using a Rearth ringke slim case with the Nexus. It fits perfectly and doesn't push on my screen protector, but I am looking for something with more drop protection. Noticed all of the TPU or thicker bumper style cases wrap around the edge of screen a bit and will likely bubble or lift my screen protector up.
Anyone found a durable case that is screen protector friendly?
Click to expand...
Click to collapse
The ringke fusion has the same fit as the slim, but with a bit thicker, all around coverage. I would guess that it doesn't give as much impact protection as tpu cases, but more than the slim.
Sent from my Nexus 5 using Tapatalk
The Ringke Fusion is very similar to the Spigen Ultra Hybrid. http://i.imgur.com/2869wVa.jpg Shows a side cross section. Looks like it has minimal contact with the edge. I might give one of those a shot.
The official nexus bumper case from Google does not interfere with the screen protector at all. I have the Spigen Neo Hybrid, which bubbles the edge of the screen protector in some areas. Also have a Nilkin case from eBay that bubbles the lower right corner.
The Google bumper is perfect. No interference at all.
I've had the Diztronic tpu case on for a few days now. It's causing no problems with my Spigen PET film screen protector.
Sent from my Nexus 5 using Tapatalk