One thing I don't understand - AT&T, Rogers, Bell, Telus Samsung Galaxy S III

I bought the phone and my network indicator goes 3g, 4g, LTE.
I flashed JB 4.1 and the network indicator goes 3g, H+, 4g.
I flashed back to rogers original firmware, indicator goes 3g, 4g, LTE.
Flashed JB again, and goes 3g, H+, 4g.
Now I flashed back to the same rogers original firmware and now it goes 3g, H+, 4g.
One is the culprit that determine what should be shown?
EDIT - reflashed rogers firmware again, and now it reads 3g, 4g, LTE

roger85 said:
I bought the phone and my network indicator goes 3g, 4g, LTE.
I flashed JB 4.1 and the network indicator goes 3g, H+, 4g.
I flashed back to rogers original firmware, indicator goes 3g, 4g, LTE.
Flashed JB again, and goes 3g, H+, 4g.
Now I flashed back to the same rogers original firmware and now it goes 3g, H+, 4g.
One is the culprit that determine what should be shown?
Click to expand...
Click to collapse
When you flashed the 2nd time the original rogers firmware, did you perform a full wipe? Including dalvik and cache?

Hmm, i think i did. So I guess that is why.
Is there any difference between these indicators?

Do a speed test when you see 4g. Most JB ROMs show 4g but you get lte speed.

tonymtl said:
Do a speed test when you see 4g. Most JB ROMs show 4g but you get lte speed.
Click to expand...
Click to collapse
Because LTE is the only real 4g.

Related

Telus: 4G LTE turned into H+ ?

When I first got my galaxy s3, telus said it would come with 4g lte. It worked well and on the top notification section, it specifically said, 4g lte. Now I'm trying out custom roms and such, and I downloaded CM10. However, on CM10, the icon no longer says 4g lte, but it says H+. When I revert back to my old rom, it says 4G (ONLY 4G, no LTE at the end). Can anyone tell me why my data connection has been demoted, or if it has been demoted at all? Should I just give Telus a call and ask whats up with this?
And yes, LTE is available in my area, I'm in Vancouver.
Thanks
sulihpoeht said:
When I first got my galaxy s3, telus said it would come with 4g lte. It worked well and on the top notification section, it specifically said, 4g lte. Now I'm trying out custom roms and such, and I downloaded CM10. However, on CM10, the icon no longer says 4g lte, but it says H+. When I revert back to my old rom, it doesn't say 4G (i ahven't seen it say LTE at the end yet though). Anyone can tell me why my data connection has been demoted, or if it has been demoted at all? Should I just give Telus a call and ask whats up with this?
And yes, LTE is available in my area, I'm in Vancouver.
Thanks
Click to expand...
Click to collapse
I have the same problem: I have ATT, since using custom ROM (TASK ROM) i have lost LTE, even though the APN settings are correct, the only way that i've have gotten LTE back is by going to the store and getting a NEW micro-SIM , then LTE works, and to answer your question, H+ is just HSDPA+ and 4G is LTE.
40mpg said:
I have the same problem: I have ATT, since using custom ROM (TASK ROM) i have lost LTE, even though the APN settings are correct, the only way that i've have gotten LTE back is by going to the store and getting a NEW micro-SIM , then LTE works, and to answer your question, H+ is just HSDPA+ and 4G is LTE.
Click to expand...
Click to collapse
Thanks!
And just for clarification: when you got the new micro sim, were you able to combine both the custom rom and 4g lte? Or is it one or the other?
yeah apparently in canadian carriers, they're changing up things, like for example our rom on ics, i get 4g and LTE even tho im on 4g plan but s3 is LTE but some custom roms such as cm9,10,miui,aokp and so forth have things setup to h+ and for example even tho you might LTE speeds on cm10 via toggle of LTE on, it'll still show 4g meaning it is LTE but its just how structure in systemui is setup. eventually we all hope it'll change, best way to find your speeds and confirm what you're getting is Speed test via market and it'll tell u all.. hope it all helps
edit and it'll also depend which towers are setup in which configuration, such as if you're closer to main junction of cities for example Toronto for me, i'll get LTE like whoa but say im in brampton now it might have towers catching LTE but not as frequent hence it'll fallback on 4g.
AOSP ROMs will always be G, E, 3G, H, H+, 4G
G - GPRS
E - Edge
3G - 3G
H - 3.5G down
H+ - 3.5 G up/down
4G - LTE
BNaughty said:
AOSP ROMs will always be G, E, 3G, H, H+, 4G
G - GPRS
E - Edge
3G - 3G
H - 3.5G down
H+ - 3.5 G up/down
4G - LTE
Click to expand...
Click to collapse
yeah like as i was saying structure is based upon that. the reason why those structures don't change is because vanilla roms aka aosp roms are not just based on 1 type of device but 1000 of devices so you can imagine, doing 1,000 different things, ahh id go nuts haha
wali01x said:
yeah like as i was saying structure is based upon that. the reason why those structures don't change is because vanilla roms aka aosp roms are not just based on 1 type of device but 1000 of devices so you can imagine, doing 1,000 different things, ahh id go nuts haha
Click to expand...
Click to collapse
Well it's just a more accurate representation of what you are connected to... Despite what all the carriers say, the stock rom only saying 4g, is NOT 4g... it's 3.5g which is better represented with H, and H+.... Marketing schemes really... True 4G is LTE...
BNaughty said:
Well it's just a more accurate representation of what you are connected to... Despite what all the carriers say, the stock rom only saying 4g, is NOT 4g... it's 3.5g which is better represented with H, and H+.... Marketing schemes really... True 4G is LTE...
Click to expand...
Click to collapse
yes sir, true it is marketing schemes haha i didn't wanna say it out loud but hey sometimes you gotta do those things to sell =) right ,as carrier perspective if they can sell all the stock for the devices and make the money they're happy, and we're happy lol.
I've noticed with my device that LTE coverage, at least in my local area, is fairly sparse, but occasionally present nevertheless.
If you're not seeing it at all, you might check that LTE is enabled in two places: check Settings -> More -> Mobile Networks -> Network Mode for an LTE setting; and dial *#*#4636#*#* to pull up the Testing menu, go to Phone Information, and check "Set Preferred Network Type" for an LTE setting. Doing both of these allowed my phone to start seeing the LTE network.

(Q) how come theres no 3g icon?

Im coming from sprint to tmobile where it was 3g and 4g thats it. No matter what option i pick in mobile network i get the 4g icon up top. Is there no 3g?
SGS4 Tapatalk 2
With sprint they use evdo for 3g data, with tmo they use hspa+ which it technically is a 3g signal (upgraded to get near 4g speeds) they just call that 4g. Then on top of that they have lte which is true 4g. If you dont have lte in your area or you just turn off the lte radio you still get hspa+(hence why it says 4g).
Hope that helps
kanyewest said:
Im coming from sprint to tmobile where it was 3g and 4g thats it. No matter what option i pick in mobile network i get the 4g icon up top. Is there no 3g?
SGS4 Tapatalk 2
Click to expand...
Click to collapse
T-Mobile will not display the 3G icon because it is set up that way, custom ROM's on T-Mobile will display that 3G and H+ icons, rest assured, when using 3G speeds, the phone automatically drops to it. Edge even E, sometimes G lol. My wife's Note2 does that, I have the S2 and rooted with a custom ROM and I can display all when used.
My i9300 has showed everything but "g", guess I'm one of the lucky ones who gets 4g in my area on this beast.

[Q] How do I switch to 3G on cm10.1?

Recently after updating my modem to I747MVLDMF1, I noticed that the network symbol said H. I believe that means LTE. How do I switch back to 3G? I want to save battery life.
thats hspa. the "4G" signal type is LTE service
xBeerdroiDx said:
thats hspa. the "4G" signal type is LTE service
Click to expand...
Click to collapse
So I am already using 3G?
i think technically that 3g service may even display the title "3G" by your signal. in any event, "H" and "H+" are hspa/hspa+
H is a type of 3G. It is essentially an improved data rate version of 3G known as HSPA. You can read up on it for exact details. On CM10 LTE connections will be annotated with 4G vice H, H+, or 3G. On stock TouchWiz it is different. LTE is annotated as 4G LTE and H is annotated as 4G.
Sent from my SAMSUNG-SGH-I747
TimeAndroid said:
Recently after updating my modem to I747MVLDMF1, I noticed that the network symbol said H. I believe that means LTE. How do I switch back to 3G? I want to save battery life.
Click to expand...
Click to collapse
If you are still wondering... I do not believe there is a reliable fix to change to H+ only

How do I re-enable LTE

Hey all! Ok, so my gf has had this S2 from Koodo (Telus) since January. Out of the box it came with LTE/4G enabled and working fine. However, I rarely leave things alone and right away I installed TWRP, AOKP and I think, Tiberius Kernel. Have been using variations of each since. However, ever since I did that, the 4G hasn't worked. In the phone settings it says LTE/GSM Auto. However if I change it to anything else, like LTE ONLY, for example, it just stays at LTE/GSM auto. Nothing happens. So I am wondering how to get her 4G to work again since I know it is fully capable of it and my area does have working LTE.
santeana said:
Hey all! Ok, so my gf has had this S2 from Koodo (Telus) since January. Out of the box it came with LTE/4G enabled and working fine. However, I rarely leave things alone and right away I installed TWRP, AOKP and I think, Tiberius Kernel. Have been using variations of each since. However, ever since I did that, the 4G hasn't worked. In the phone settings it says LTE/GSM Auto. However if I change it to anything else, like LTE ONLY, for example, it just stays at LTE/GSM auto. Nothing happens. So I am wondering how to get her 4G to work again since I know it is fully capable of it and my area does have working LTE.
Click to expand...
Click to collapse
The t989d doesn't have lte. Doesn't have the hardware for it.
Sent from my cell phone telephone
Ok but my mother has the same phone (got them each one) but I haven't touched that one and it says 4G by the signal bars... Why is that?
Sent from my Nexus 4 using xda premium
santeana said:
Ok but my mother has the same phone (got them each one) but I haven't touched that one and it says 4G by the signal bars... Why is that?
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
4g is the same as H+ on custom roms. And now some say DC. Not sure why they left behind the 4g symbol, but its all the same thing. So if you see H+, DC or 4g, its all actually 4g.
You should be on GSM/wcdma preferred in mobile settings.
Sent from my cell phone telephone
kj2112 said:
4g is the same as H+ on custom roms. And now some say DC. Not sure why they left behind the 4g symbol, but its all the same thing. So if you see H+, DC or 4g, its all actually 4g.
Sent from my cell phone telephone
Click to expand...
Click to collapse
Oh ok! Thanks!
Sent from my Nexus 4 using xda premium
I have sorta the same problem, except I have a tmobile s2 t989. I flashed cm 10.1 nightlies and the newest radio. Phone works good except my phone no longer shows the 4G symbol above the signal bars. It instead says 3G. Before rooting it said 4G above the signal bars. Every once in a while it says DC. Any advice?
iMacMane said:
I have sorta the same problem, except I have a tmobile s2 t989. I flashed cm 10.1 nightlies and the newest radio. Phone works good except my phone no longer shows the 4G symbol above the signal bars. It instead says 3G. Before rooting it said 4G above the signal bars. Every once in a while it says DC. Any advice?
Click to expand...
Click to collapse
Explained the symbols in posts above. And if you are getting a lot of 3g....that's reception. Your losing your 4g connection and its picking up 3g. Usually for this to happen you'd only be getting about 1 bar on your signal.
Sent from my cell phone telephone
kj2112 said:
Explained the symbols in posts above. And if you are getting a lot of 3g....that's reception. Your losing your 4g connection and its picking up 3g. Usually for this to happen you'd only be getting about 1 bar on your signal.
Sent from my cell phone telephone
Click to expand...
Click to collapse
I appreciate the info. I live in Orlando and I'm pretty sure we have tmobiles 4g or hspa+. I was just wondering why I'm only getting 3G date speeds instead of 4G speeds. The internet still seems relatively fast but wanted to make sure the phone wasn't slowing down the speeds to 3G speeds.
iMacMane said:
I have sorta the same problem, except I have a tmobile s2 t989. I flashed cm 10.1 nightlies and the newest radio. Phone works good except my phone no longer shows the 4G symbol above the signal bars. It instead says 3G. Before rooting it said 4G above the signal bars. Every once in a while it says DC. Any advice?
Click to expand...
Click to collapse
Aosp ROMs run on 3g (umts) until data is called. Once data is called it will pull up h+(hspa+)or dc(dc-hspa) depending on your area. Its a battery saving feature and the stock Samsung ROMs show 4g all the time. Unless on edge or GPRS. I think even touchwiz ROMs went to umts while idle.
sent from my t989 hercules

Liquid smooth 3.2 not showing 4g or 4g lte only 3g on s3

Hi
Does anyone know if the liquid smooth 3.2 rom 10-9-14 version shows 4g lte on the status bar?
I just had it flashed yesterday and I never say it show 4g lte connection all day today? I usually always have 4g lte connection.
It only showed 3g all day.
I checked the settings and it says the preferred connection is LTE in liquid smooth. My stock rom always showed 4g LTE
yeah this liquidsmooth has not shown 4g or LTE once; it always says 3g

Categories

Resources