I have just flashed Jellytime R16 to my DHD but have a slightly damaged touch screen. Unfortunately the part of the touch screen that doesn't work is the bit where you have to press the start button to move off the screen where you select the language on first boot up.
Does anyone have any ideas how I could skip the first configuration screen of the Jellytime R16 ROM?
I don't think it's permanent maybe a bad zip? Did you check MD5 checksum before you flash? And did you full wipe?
Sorry, I don't think I made myself clear. I do have a damaged touch screen nothing to do with the rom. There is a section of the touch screen that just doesn't work. It is this part that sits exactly where the start button is. It is a shame these start screens don't rotate or the start button was slightly bigger.
So if I could skip this fisr language selection screen I would probably be ok for using the rest of the rom.
I had quite a bit of trouble earlier today installing R16 due to the screen not working at all after the bootup. Had to pull the battery 2 times in a row and make sure the charger was unplugged before the screen would react to touch. Maybe you're also experiencing this thing (several others are reporting it in the JT thread).
foxx1337 said:
I had quite a bit of trouble earlier today installing R16 due to the screen not working at all after the bootup. Had to pull the battery 2 times in a row and make sure the charger was unplugged before the screen would react to touch. Maybe you're also experiencing this thing (several others are reporting it in the JT thread).
Click to expand...
Click to collapse
As I said in my last post this is not a Rom problem I do have a damaged touch screen. I Just need a way of getting past the first setup screen or rotating th screen.
Skunkworx said:
As I said in my last post this is not a Rom problem I do have a damaged touch screen. I Just need a way of getting past the first setup screen or rotating th screen.
Click to expand...
Click to collapse
This is a horrible suggestion for any other use and goes against everything we know about proper flashing, but if all else fails maybe try dirty flashing it over another ROM in which you CAN go through the first boot settings (for example, an ICS ROM that doesn't require the START button in that location). If the unexpected problems that sometimes arise from dirty flashes don't come up, you might be able to get into Jelly Time without the first boot menus.
Obviously, all the problems with dirty-flashing different ROMs come with this "solution."
bananagranola said:
This is a horrible suggestion for any other use and goes against everything we know about proper flashing, but if all else fails maybe try dirty flashing it over another ROM in which you CAN go through the first boot settings (for example, an ICS ROM that doesn't require the START button in that location). If the unexpected problems that sometimes arise from dirty flashes don't come up, you might be able to get into Jelly Time without the first boot menus.
Obviously, all the problems with dirty-flashing different ROMs come with this "solution."
Click to expand...
Click to collapse
Thats an interesting suggestion but the question there is which ICS ROM would give the best results?
I think I would prefer to have a full wipe on installation. So having a way of skipping that first configuration screen, or remotly pressing the start button or even been able to force it to rotate the screen would do the trick. However untill you have got past those first configuration screen you are locked into not been able to run any applications.
I was wondering if there was any way via ADB command line to achive this?
Skunkworx said:
Thats an interesting suggestion but the question there is which ICS ROM would give the best results?
I think I would prefer to have a full wipe on installation. So having a way of skipping that first configuration screen, or remotly pressing the start button or even been able to force it to rotate the screen would do the trick. However untill you have got past those first configuration screen you are locked into not been able to run any applications.
I was wondering if there was any way via ADB command line to achive this?
Click to expand...
Click to collapse
Yes there is. You can use the "adb shell input keyevent <event_code>" command.
You'll probably want to send the DPAD_CENTER command to click that button. I think its event code is 23. Try typing "adb shell input keyevent 23".
Try the code for KEYCODE_ENTER as well.. its 66.
There is a whole list of keyevents at this link:
http://developer.android.com/reference/android/view/KeyEvent.html
Just lookup the "Constant Value" in the description of whatever KEYCODE_xxx you're trying to simulate and use that constant value as the event_code for the command.
I've tried simulating the DPAD_LEFT and DPAD_RIGHT keypress and they're working like a charm
---------- Post added at 04:34 PM ---------- Previous post was at 04:14 PM ----------
Yup. I've tried working with these Keycodes and they work fine.
Use event_codes 19 for UP, 20 for DOWN, 21 for LEFT, 22 for RIGHT to navigate to whatever button you need to press and then use 23 for pressing that button.
Should solve your problem.
Skunkworx said:
I have just flashed Jellytime R16 to my DHD but have a slightly damaged touch screen. Unfortunately the part of the touch screen that doesn't work is the bit where you have to press the start button to move off the screen where you select the language on first boot up.
Does anyone have any ideas how I could skip the first configuration screen of the Jellytime R16 ROM?
Click to expand...
Click to collapse
Hi, did you flash Gapps as well? I've moved from ARHD (which has the configuration start screen) to JellyTime and never got the language or any other configuration start screen (which I'm glad to get rid of). I always full wiped, clean flashed just the ROM, then booted into the OS for the first time to check it out. No Gapps and no language/configuration screen - it would always go straight to the lock screen where I would just swipe to the right and it would ask me to choose either the Nova or Trebuchet launcher. I'd then rebooted into recovery again and flashed Gapps. Hope this helps.
if4ctOr, Thanks for your suggestion this is what I was originally looking for however I didn't get around to trying it as the idea that divche put forward was a much easier approach.
Divche: Thanks, that did the trick perfectly. I am also comming from ARHD so I thought I give your idea a try. I was flashing the Gapps at the same time but booting into the OS first then flashing the Gapps after that prevented the configuration popup.
I am currently swapping between ARHD and Jellytime using the recovery backups as I still haven't got everything installed and setup in the new ROM yet. I didn't realise but I had quite a few of my contacts as phone contacts and not google contacts so they didn't sync into the new rom. So I am looking for a soloution to that and also a way to move my sms messages over.
Eventually I am planning on using the Jelly time as my full time ROM but there are alot of updates to it at the moment, which is a good thing in making it stable. However it takes quite a while to apply all the applications and settings I use after doing a full wipe. Do you need to do this when flashing a new version of JT over a previous one or is there an easy way of doing that? As I read in a lot of places that you should always do a full wipe and that titainum backup is not recomended?
Skunkworx said:
if4ctOr, Thanks for your suggestion this is what I was originally looking for however I didn't get around to trying it as the idea that divche put forward was a much easier approach.
Divche: Thanks, that did the trick perfectly. I am also comming from ARHD so I thought I give your idea a try. I was flashing the Gapps at the same time but booting into the OS first then flashing the Gapps after that prevented the configuration popup.
I am currently swapping between ARHD and Jellytime using the recovery backups as I still haven't got everything installed and setup in the new ROM yet. I didn't realise but I had quite a few of my contacts as phone contacts and not google contacts so they didn't sync into the new rom. So I am looking for a soloution to that and also a way to move my sms messages over.
Eventually I am planning on using the Jelly time as my full time ROM but there are alot of updates to it at the moment, which is a good thing in making it stable. However it takes quite a while to apply all the applications and settings I use after doing a full wipe. Do you need to do this when flashing a new version of JT over a previous one or is there an easy way of doing that? As I read in a lot of places that you should always do a full wipe and that titainum backup is not recomended?
Click to expand...
Click to collapse
For moving SMS, I'd suggest this app : https://play.google.com/store/apps/...mNvbS5yaXRlc2hzYWh1LlNNU0JhY2t1cFJlc3RvcmUiXQ..
And as far as flashing the updates of JellyTime are concerned... It is recommended to always full wipe but you might get away with flashing the update over the previous version without a wipe. In some updates the author of the ROM explicitly says that full wipe is needed... in those cases you must. In other cases you can flash the ROM without the wipe which will keep your apps and data intact. However, it would still be better to wipe your cache and dalvik cache atleast.
Using Titanium Backup is not recommended at all when you're switching between different Android versions.. however I personally think it works ok when used between updates of the same ROM.
Skunkworx said:
Divche: Thanks, that did the trick perfectly.
Click to expand...
Click to collapse
I never encountered the config screen, so it was more of a guess based on what I did, so I'm glad it helped!
I am currently swapping between ARHD and Jellytime using the recovery backups as I still haven't got everything installed and setup in the new ROM yet. I didn't realise but I had quite a few of my contacts as phone contacts and not google contacts so they didn't sync into the new rom.
Click to expand...
Click to collapse
I also had all my contacts as phone contacts too. I chose to convert my contacts (and my calendar as well) to google for ease of syncing later on, so I have no tried and tested suggestions on how to maintain them as phone contacts. What I did was let HTC Sync synchronise with Outlook (I created a new PST file for this, then specified it in HTC Sync), then used GO Contact Sync Mod (sorry I can't post links yet) to sync it with my gmail account.
If you really wanted to leave as phone contacts, you could try Titanium Backup - but since your phone contacts are saved as system data it's a bad idea - so I'd recommend against it. If you're backing up your nandroid for ARHD, you could always try TiBu and let us know how it went - I think it was labeled Dialer Storage - filter to system data and just look through all the green-colored items for something that says "CONTACTS" or "PEOPLE".
However it takes quite a while to apply all the applications and settings I use after doing a full wipe. Do you need to do this when flashing a new version of JT over a previous one or is there an easy way of doing that? As I read in a lot of places that you should always do a full wipe and that titainum backup is not recomended?
Click to expand...
Click to collapse
+1 to what if4!ct0r said regarding wiping before flashing.
There will always be some system settings that you will have to re-enter manually if you customize them a lot even when updating builds of the same ROM (probably because these are the system items that you shouldn't be restoring). These will depend on the ROM, but for me and JellyTime, the ones I had to redo were developer, lock screen, system/status bar, sound, display, language, as well as ringtone/sound notifications for alarms, messaging and calendar. Also you'll have to manually set up your widgets again - typically ones that require you to configure it as you place it.
As for TiBu not being recommended - personally I didn't have a problem with it when moving over to JellyTime. I actually purchased the Pro version just for this and for flashing new JellyTime builds. There are two things to consider when restoring via TiBu: 1) system data; and 2) app and app data.
System data: The main concern here is, when changing to a completely different ROM, do NOT restore any system data (unless you're aware whether it was updated in the new build or just experimenting). Even when you're updating to a new build of the same ROM, you should at least avoid restoring the red-coloured items and just stick to green and yellow items that may contain useful data such as contacts, sms, call logs, saved wifi access points, bookmarks, etc.
App and app data: I personally think it's ok to restore your apps themselves, but you could always record a list of what you had and download them manually again just to be safe - not a big deal unless you have over a hundred apps. When switching ROMs, try to avoid restoring the app's data unless you really wanted/needed it for certain apps - in that case, be conservative with what you choose. I'm not a programmer or developer, so I don't know how this would affect your system/app if switching to a ROM with a different Android version. Restoring app data between builds of the same ROM should be fine, as I've done it between all my JellyTime flashes with no issue even when it updated to Android 4.1.2.
Tip: after flashing the ROM, and doing your typical post-ROM-flash stuff (like fixing permissions, rebooting, wiping cache+dalvik, flashing Gapps, etc), and you've tested it and are happy with its stability, download TiBu again (or if you had the apk stored somewhere after you purchased it, just install it manually), boot to recovery and make a nandroid of the new ROM as it stands: nice and clean before any apps are installed. This way you've got a recovery option without having to go through the hassle of re-flashing the ROM build again, setting it up, etc if all you did was stuff up while experimenting with restoring data on TiBu.
As always, make a nandroid backup before flashing. As I mentioned, if you're initially happy with the ROM, I recommended also doing one after you flash while the system is fresh and clean. Sorry if this post is a bit wordy, but I thought more info would help, as it helped me in the past.
Skunkworx said:
So I am looking for a soloution ... to move my sms messages over.
Click to expand...
Click to collapse
if4ct0r said:
For moving SMS, I'd suggest this app...
Click to expand...
Click to collapse
+1 for SMS Backup & Restore; I also used it, but keep in mind AFAIK it doesn't save MMS. I also used Call Logs Backup & Restore, in case you're interested in backing this up too. But since I started using TiBu, I don't need either of these apps any more.
Maybe changing the digitizer could help asd
Sent from my Galaxy Nexus using xda app-developers app
Related
Hey everyone.
I know there's a couple other threads with this problem, but none of them included their last_kmsg files. It took a bunch of tries before I could stay booted up long enough to grab it, but I have one.
I'm getting a significant number of reboots on my EVO. Like almost unusable at times. It seems fairly random, although there's a slight suspicion is has something to do with the GPS. Maps has been a crash-cause before and the most recent bout last night was brought on by foursquare. (the annoying part is I had just used 4sq fine 30 minutes prior with no issues. Then, booted it up, refreshed locations and my phone was unusable for hours.)
I've done all the standard things. Fix permissions, wipe cache, wipe dalvik, wipe data/system, reinstall the latest CM7 build (update-cm-7.0.2.1-Supersonic-signed.zip), wipe cache, wipe dalvik. I entered my google account info but told it not to sync anything. It is now rebooting less than a minute after it starts up. I haven't installed any apps at all since this most recent wipe/reload of CM7. It reboots with and without the sd card installed.
I'm at a loss here and getting incredibly frustrated. Many replies say it's as easy to fix as wipe everything and re-do it. Obviously something abnormal is screwed up on my phone and I can't figure it out.
Here's the pastebin from this morning: pastebin.com/Ki7H8bH3 (Crap, I don't post here enough to be allowed to post links. Just add the http part to that.)
And then when I got awake enough, I did another complete wipe/reload. The rebooting is even worse now, it's taken me almost an hour to get to a point I can install es explorer to try and pull another file. And when I did, it was blank.
Any ideas?
Thanks!
1. Go to the link below and download the PC36IMG.zip file for amon RA v2.3 and place it on the root of your SD card.
http://forum.xda-developers.com/showthread.php?t=705026
2. Shutdown your device.
3. Simultaneously press the DOWN volume button and the power button until your device starts. There will be a short pause and then a few lines of text will scroll across the screen. Afterwards, the bootloader will automatically detect the PC36IMG.zip file and prompt you to install it. Follow the easy prompts to install. Installation will take less than 10 seconds to complete. Afterwards, reboot into your new recovery. Go to the backup/restore menu and make a nandroid backup of your current setup.
4. Now go to the wipe menu and wipe EVERYTHING in it EXCEPT the SD card.
5. Go to the flash menu and flash the rom you desire to flash.
On many occasions, reflashing the recovery solved rebooting issues and hopefully, it will solve yours.
posting & replying via the XDA Premium app.
Hi dougjamal,
Thanks for the reply.
I've made some progress. Last night I had done a majority of what you suggested, with installing amon RA. I've also just formatted my entire sd card just to be sure.
I haven't tried wiping things other than cache and dalvik, so I'll try that.
My progress I mentioned is that I had CM7 up and running until I flashed a new kernel and gapps in there. So I guess I'll just stick with the stock CM7 kernel, try your extra wiping and see how that works.
Thanks!
grifta67 said:
Hi dougjamal,
Thanks for the reply.
I've made some progress. Last night I had done a majority of what you suggested, with installing amon RA. I've also just formatted my entire sd card just to be sure.
I haven't tried wiping things other than cache and dalvik, so I'll try that.
My progress I mentioned is that I had CM7 up and running until I flashed a new kernel and gapps in there. So I guess I'll just stick with the stock CM7 kernel, try your extra wiping and see how that works.
Thanks!
Click to expand...
Click to collapse
You're very welcome. Sorry for the delayed response. I was having a late lunch and then drove home. Anyway, keep us informed of your progress and enjoy the rest of your day.
posting & replying via the XDA Premium app.
No worried on any delay, just glad to have someone that took a read and time to reply!
Ugh, it's the randomness of this that has me so frustrated. I thought I had a good install again, I left it sit on the "touch the android" screen for a few minutes and it stayed on. Made it through the setup process ok. I allowed the setup to "auto-download" a handful of the google apps it asks if you want. Once they got to about 38%... boom, restart.
So I did another toooootal wipe and I'll manually install those apps one by one. We'll see...
dougjamal said:
1. Go to the link below and download the PC36IMG.zip file for amon RA v2.3 and place it on the root of your SD card.
http://forum.xda-developers.com/showthread.php?t=705026
2. Shutdown your device.
3. Simultaneously press the DOWN volume button and the power button until your device starts. There will be a short pause and then a few lines of text will scroll across the screen. Afterwards, the bootloader will automatically detect the PC36IMG.zip file and prompt you to install it. Follow the easy prompts to install. Installation will take less than 10 seconds to complete. Afterwards, reboot into your new recovery. Go to the backup/restore menu and make a nandroid backup of your current setup.
4. Now go to the wipe menu and wipe EVERYTHING in it EXCEPT the SD card.
5. Go to the flash menu and flash the rom you desire to flash.
On many occasions, reflashing the recovery solved rebooting issues and hopefully, it will solve yours.
posting & replying via the XDA Premium app.
Click to expand...
Click to collapse
Seems like this gets posted quite often, huh??? lol
Don't rule out a corrupt download. If you have the time, download both Salvage-Mod 1.2.1 and the gapps zip from http://www.salvage-mod.com/node/4. If you like CM7, you may like Salvage-Mod. It is pure gingerbread. If you decide to flash it, see whether or not you get bootloops with it.
posting & replying via the XDA Premium app.
HipKat said:
Seems like this gets posted quite often, huh??? lol
Click to expand...
Click to collapse
Indeed, my friend...lol...but it works.
posting & replying via the XDA Premium app.
HipKat said:
Seems like this gets posted quite often, huh??? lol
Click to expand...
Click to collapse
It does and it wish it was that easy. It's frustrating to read that others seem to have no issues at all yet when I follow those directions, which are everywhere, nothing seems to work.
dougjamal said:
Don't rule out a corrupt download. If you have the time, download both Salvage-Mod 1.2.1 and the gapps zip from http://www.salvage-mod.com/node/4. If you like CM7, you may like Salvage-Mod. It is pure gingerbread. If you decide to flash it, see whether or not you get bootloops with it.
posting & replying via the XDA Premium app.
Click to expand...
Click to collapse
I re-downloaded CM7 this morning thinking that might be the issue, but it hasn't seemed to help. I'll give a different rom a try probably, maybe there's something other than CM7 I'd be content with.
Whelp, I downloaded SalvageMod and their gapps. Wiped everything, installed salvage, installed gapps, rebooted.
I got through set-up, was ok for a couple minutes, then as I was going into my contacts to see if they had sync'd yet... reboot.
This makes me think this can't be a ROM issue.
Any other ideas?
Does the same thing happen when you run a stock (or close-to-stock) rom? Main reason I ask is that this might actually be some sort of hardware problem, but one of the best ways to test for that is to be running on stock software. I wouldn't necessarily suggest flashing an RUU to get to the latest official release, but there are stock rooted roms out there that you could try.
You probably went with CM specifically to get away from Sense and the default HTC stuff (that's most people's reasons anyway), but if you flash a stock rom and it's still rebooting like that then I'd say chances are REALLY good that it's hardware and that you'd have grounds for getting a replacement phone (just remember to unroot first.)
And if it stops randomly rebooting on you then you'll have at least narrowed things down a bit.
jesuspgt said:
Does the same thing happen when you run a stock (or close-to-stock) rom? Main reason I ask is that this might actually be some sort of hardware problem, but one of the best ways to test for that is to be running on stock software. I wouldn't necessarily suggest flashing an RUU to get to the latest official release, but there are stock rooted roms out there that you could try.
You probably went with CM specifically to get away from Sense and the default HTC stuff (that's most people's reasons anyway), but if you flash a stock rom and it's still rebooting like that then I'd say chances are REALLY good that it's hardware and that you'd have grounds for getting a replacement phone (just remember to unroot first.)
And if it stops randomly rebooting on you then you'll have at least narrowed things down a bit.
Click to expand...
Click to collapse
Hey jesuspgt,
I haven't tried that yet. I'll look around for a rooted stock ROM later and give that a shot.
My current status is back to uncertainty. At the moment, my evo has been sitting here fine, not rebooting, for the past hour or two. It's still the Salvage ROM I first installed (i.e. I haven't reinstalled it since it rebooted). Now I haven't really used it any, so it might go to hell as soon as I do that, but for now, it's on and only had that one (maybe two, I can't keep track...) initial reboot.
That's what makes it tricky to diagnose. I know using any custom ROM runs the risk of loosing stability and all ROMs probably produce a reboot here and there. Tough to tell if it's just a "comes with the territory" type of reboot or an actual problem.
Even though I'm sure there's some CM features I'll miss, maybe Salvage is my answer.
Thanks!
*sigh* Well I decided to try using some apps and guess what... reboot.
All I was doing was trying to play a game of Androminion, which is about as basic and not-tasking as possible, so I can't imagine that's what crashed things.
The only thing I can think of that you *may* need to do is reflash your hboot and/or your baseband, PRI & NV from within recovery. You can download it from the link below.
http://forum.xda-developers.com/showthread.php?t=715485
posting & replying via the XDA Premium app.
dougjamal said:
The only thing I can think of that you *may* need to do is reflash your hboot and/or your baseband, PRI & NV from within recovery. You can download it from the link below.
http://forum.xda-developers.com/showthread.php?t=715485
posting & replying via the XDA Premium app.
Click to expand...
Click to collapse
Excellent, I'm going to try that. My hboot is still 0.93!
Hey dougjamal,
Just wanted to drop an update. I know how annoying it is to help someone out and never hear how things ended up!
Who knows what combo helped, but I'm fairly stable now. After updating my hboot, I flashed to Sprint Lovers, did the ##GPSCLRX# trick and then flashed to the latest nightly of CM7 (63 I believe). Only one or two crashes and one bootloop since then.
Of course, as luck would have it, a new problem showed up in the form of a dead spot on my touch screen. Right about where the "Clear" button is for notifications, that entire strip across the phone won't respond to touch. I was hoping it was a nightly issue, but I switched to a different rom and the issue was still there. Looks like it's going in for a warranty claim after-all!
Thanks for all your help
-grifta67
HI all,
I've flashed CWM5.5 from the recomended thread and installed Cyanogen 9 Alpha 1. Unfortunatly the phone seems to boot up but does never leave the boot animation screen (yes I've also flashed gapps after cyanogen).
Anyone can identify this pattern? On a normal device I could hook it up through a serial cable and try to debug the boot... Eventually how can I do that with a I8150?
Well, any help would be most welcome. I'm totally available for testing and I do have some experience with Linux even at a very low level/system space.
Install
Use CWM5.
Warning: Only use this recovery to flash CM9. Otherwise, you risk bricking your phone!
Wipe data and cache.
Flash update*.zip.
Flash gapps*.zip. You must flash gapps after every upgrade to CM9 since /system is formatted, wiping your previous add-ons.
Reboot phone.
After you setup your Google account, reinstall the three apps from Market in order to restore most of your apps, call log and SMS history.
Warning: Do not restore backup data of system apps!
If you restore a bad backup with cached settings in telephony.db in data/data/com.*.*.telephony it can break MMS.
It seems that restoring backups can also break Calendar sync.
read it thoroughly ...
1st you must flash update*.zip
2nd gapps*.zip
that just about it ....
what is your current kernel ?
That was pretty much it... I've restored not the original operator crap ROM, but instead the Value Pack ROM.
CyanogenMod9 seemed to install ok, but just looped and the phone didn't finished the boot. I'm not really sure on what happened. I'm just finishing restoring the stuff
I'm guessing you didn't wipe data/cache.
I did a factory reset, but sure, it might not have wiped the whole thing... Going to try again.
@argo68
True mate, the issue was not wiping the user cache. I've wiped the cache now from ClockWorkMod and it worked ok. Takes some time to boot compared to the stock samsung ROMs but it works fine
Anything you need tested ? I can most likely help.
I do have a problem with apps though, for example, GMAIL doesn't show the body of the message... as you can see on the screenshot, but I guess this is a app related issue maybe?
http://susepaste.org/images/39081870.png
After a reboot somehow it boots a bit faster and the gmail app is now displaying the body of the email and it seems a bit faster...
Good work, gonna ride this for a few days and see what happens.
@argo68
If you need beta testers, let me know. I'm off work this days but can't wait to get into my lab and check this stuff deeper
@argo68
he is arco68
just in case he takes offence, which I don't believe he would
Hopefully not, all the norwegians I knew personally were very nice people and always ready for some bear
ketheriel said:
Hopefully not, all the norwegians I knew personally were very nice people and always ready for some bear
Click to expand...
Click to collapse
reAdy for some BEAR ????
do you actually mean bear or beer ??
chocolemon said:
reAdy for some BEAR ????
do you actually mean bear or beer ??
Click to expand...
Click to collapse
Maybe it's the Nordic ascendance. They fight a bear with one hand while holding the beer with the other.
Hi I'm using this cyanogen mod for quite a few days now. The back side of the phone is always warm and the battery is drained very fast. Anyone have this similar problem?
I'm sure that I install the ROM correctly as i cleared everything on the phone with CWM 5.0.0.4 before and after. (Phone data / Cache Partition / Dalvik Cache / Battery Cache)
Any help would be appretiated
No such problem here. You should use an app to check what frequency the phone is running at in idle, and also how much load there is on the cpu.
This happens about once every two nights. I hit the power button and the lock screen comes up fine, i unlock it with the slider and then home screen starts flickering slowly and is completely unusable. Is this the dreaded redraw issue I've heard mentioned? A forum search doesn't bring up any solutions for this. Any idea what to look for in logcat?
This is on 28i running ICS 2.29, rooted/deodexed+ "bloatware removal script" from deodex forum. Phone works great throughout the entire day.
twent4 said:
This happens about once every two nights. I hit the power button and the lock screen comes up fine, i unlock it with the slider and then home screen starts flickering slowly and is completely unusable. Is this the dreaded redraw issue I've heard mentioned? A forum search doesn't bring up any solutions for this. Any idea what to look for in logcat?
This is on 28i running ICS 2.29, rooted/deodexed+ "bloatware removal script" from deodex forum. Phone works great throughout the entire day.
Click to expand...
Click to collapse
I've never heard of this dreaded redraw issue, nor have I had it happen to me. Maybe doing a fresh fw flash, and add customizations one by one, making a CWM back up as you add each mod. Then see where and why the issue starts. Here is my process:
1. Flash Firmware > Root > CWM
2. Make a CWM backup called something like: 29fw_clean_base--
3. install busybox and deodex
4. Make a CWM backup called: 29fw_clean_BB_DO--
5. Install init.d
6. Make a CWM backup
7. Then start adding my mods one by one maing backups as I go called 29fw_running"1,2,3, etc."--
8. Then I can go back and delete or archive CWM backups as to what I need. Always keeping the "clean_base" ready for use if need be.
jeriku said:
I've never heard of this dreaded redraw issue, nor have I had it happen to me. Maybe doing a fresh fw flash, and add customizations one by one, making a CWM back up as you add each mod. Then see where and why the issue starts. Here is my process:
1. Flash Firmware > Root > CWM
2. Make a CWM backup called something like: 29fw_clean_base--
3. install busybox and deodex
4. Make a CWM backup called: 29fw_clean_BB_DO--
5. Install init.d
6. Make a CWM backup
7. Then start adding my mods one by one maing backups as I go called 29fw_running"1,2,3, etc."--
8. Then I can go back and delete or archive CWM backups as to what I need. Always keeping the "clean_base" ready for use if need be.
Click to expand...
Click to collapse
Heh you're everywhere today man! I never even installed init.d, guessing this is for startup scripts or something? I will have to give reflashing a shot, odd thing is it was a fresh install from last week and i pretty much did the first 3 steps in that order.
Do you (or anyone who replies) have a good method for analyzing logcats? tools for proper syntax highlighting maybe? some app must do something in the middle of the night to cause this crap.
thanks
twent4 said:
Heh you're everywhere today man! I never even installed init.d, guessing this is for startup scripts or something? I will have to give reflashing a shot, odd thing is it was a fresh install from last week and i pretty much did the first 3 steps in that order.
Do you (or anyone who replies) have a good method for analyzing logcats? tools for proper syntax highlighting maybe? some app must do something in the middle of the night to cause this crap.
thanks
Click to expand...
Click to collapse
I know, since getting my LT28 I'm always checking the forum, lol.
Yes, init.d for start up / optimization scripts. It's most important to me for my led brightness script. I might suggest going back to the start and doing the bloat removal thing last. See what that gets you. I have not used that script and don't plan to. I'll remove manually what I know I want removed.
I have no knowledge on how to analyaze logcats, sorry.
twent4 said:
This happens about once every two nights. I hit the power button and the lock screen comes up fine, i unlock it with the slider and then home screen starts flickering slowly and is completely unusable. Is this the dreaded redraw issue I've heard mentioned? A forum search doesn't bring up any solutions for this. Any idea what to look for in logcat?
This is on 28i running ICS 2.29, rooted/deodexed+ "bloatware removal script" from deodex forum. Phone works great throughout the entire day.
Click to expand...
Click to collapse
I have two suggestions for you. 1}.Try going into settings>Security>Screenlock and choosing "None". This will reduce the memory usage and prolong battery life. 2).The second is to upgrade to the latest Calendar app if you use the calendar widget.
https://play.google.com/store/apps/...yLDEsImNvbS5nb29nbGUuYW5kcm9pZC5jYWxlbmRhciJd
I was having re-draw issues even on stock firmware with the old calendar / widget installed. I'm guessing this is software / memory management related issues with ICS. Could be wrong but my phone works better with the above settings / app.
Also, try the PIN lock. The slider lock screen is a hog.
I'm having the same problem. I changed to PIN screenlock but even there, I have to press each button slowly and wait for the phone to respond .. It's almost like the CPU is hung while charging .. any other idea's why this is happening? This is only happening to me while charging the phone.
I'd re flash the ftf so you'll lose root deodex and the scripts then give it a week see what happens if it works fine try rooting wait a week see what happens then deodex and see what happens
My guess is when you deodexed something got misplaced or formatted improperly and it screws up the phone while trying to unlock you may also want to boot into cwm mode clear cache dalvik and fix permissions. You never really want to install a bunch of changes at once because if one breaks the phone you cannot pinpoint the issue that's why I waited a few days before I deodexed after rooting
Sent from my LT28at using xda premium
Maybe this is a bug on ICS 2.29, that's what I'm on. Anyone seeing this on 1.19 ?
enrique71 said:
Maybe this is a bug on ICS 2.29, that's what I'm on. Anyone seeing this on 1.19 ?
Click to expand...
Click to collapse
Never had this problem. Never.
Sent from my Xperia ION on Cm9 using XDA Premium app.
In this thread you can post your experience, questions, and all other stuff that is not directly related to the RE-FLEXxx rom.
I do this to keep the dev thread clean.
Thank you for your understanding.
I will take a look into this thread from time to time but the main goal is so that users of the RE-FLEXxx rom can help out each other and that they can find help from each other in one place.
Regards, civ.
I installed 2.0 on my N5110 (coming from 1.9) and it is working well but the top of my tablet is non-responsive to touch. Happened on other releases but a reboot always fixed it. This time the problem remained, so I tried wiping cache, dalvik, fixing permissions, reboots, and all sorts of combinations. I did finally manage to fix the issue yesterday after one of those reboots but now the problem just reappeared and won't go away. Any suggestions?
Edit: Finally got it resolved with a full wipe of data, cache, and dalvik through cwm recovery. Then I flashed Civz reflexx Rom 2.1 and rebooted. The top of the screen still did not respond to touch, so I rebooted and now everything works perfectly. :thumbup:
anybody else still having SNote FC on them in 2.0? also the extended menu items will not work for me...setting fc
dpaik said:
anybody else still having SNote FC on them in 2.0? also the extended menu items will not work for me...setting fc
Click to expand...
Click to collapse
no snote and extended menu all working for me. Maybe you had a bad download? Otherwise try wiping and installing fresh.
dpaik said:
anybody else still having SNote FC on them in 2.0? also the extended menu items will not work for me...setting fc
Click to expand...
Click to collapse
yes, hd happened to me, I re downloaded and reflashed it again and is OK now..
well, I finally installed twrp, and backed up my stock rom, so I am getting ready to flash the first custom rom on any tablet I have had!
one quick question; I am a very experienced rom flasher; I see in TWRP, there are several options under the wipe menu, and, I know to check the first 4 options before flashing this rom; then, there are 2 more options, wipe internal card, and wipe external card.
I know not to wipe my external card, since all my "stuff" is there...should I wipe the internal card before flashing, or is that not necessary when flashing this rom from a stock rom?
I apoligize if this belongs in the the TWRP thread, but I thought since others have probably gone through this, I wanted to post the question here as well. I guess I should post it in the TWRP thread as well...
thank you!
wase4711 said:
well, I finally installed twrp, and backed up my stock rom, so I am getting ready to flash the first custom rom on any tablet I have had!
one quick question; I am a very experienced rom flasher; I see in TWRP, there are several options under the wipe menu, and, I know to check the first 4 options before flashing this rom; then, there are 2 more options, wipe internal card, and wipe external card.
I know not to wipe my external card, since all my "stuff" is there...should I wipe the internal card before flashing, or is that not necessary when flashing this rom from a stock rom?
I apoligize if this belongs in the the TWRP thread, but I thought since others have probably gone through this, I wanted to post the question here as well. I guess I should post it in the TWRP thread as well...
thank you!
Click to expand...
Click to collapse
This is my opinion on it.....I usually only wipe the internal card if I am starting completely over with flashing a device. Wiping data/cache is usually all that is needed but if there are a lot of apps that get installed over time their folders get left and every so often I like to wipe it to get rid of all the "orphaned" folders. If you are going to just restore all those apps anyways then it won't make a difference either way. If you are going from the stock rom to a TW custom based on the stock it shouldn't be necessary to flash internal.
thanks man, that is what I thought, but, since I have never flashed a custom rom on to any tablet I have owned, I wasnt sure if there was other "stuff" on the internal card that might be needed no matter what; and, yes, since I will just be restoring all of my apps pretty much once I flash this custom rom, I might as well just leave the internal card alone...
I appriciate your fast reply!
wase4711 said:
thanks man, that is what I thought, but, since I have never flashed a custom rom on to any tablet I have owned, I wasnt sure if there was other "stuff" on the internal card that might be needed no matter what; and, yes, since I will just be restoring all of my apps pretty much once I flash this custom rom, I might as well just leave the internal card alone...
I appriciate your fast reply!
Click to expand...
Click to collapse
Please take my advice with caution...I did not take your point into consideration because I have yet to do it on this particular tablet (only had the Note for 1 day). Never had a problem on any other tablets/devices but who knows. I wouldn't think there would be an issue. However, like you say probably no reason to wipe internal if you will just be restoring them back anyways.
CCallahan said:
Please take my advice with caution...I did not take your point into consideration because I have yet to do it on this particular tablet (only had the Note for 1 day). Never had a problem on any other tablets/devices but who knows. I wouldn't think there would be an issue. However, like you say probably no reason to wipe internal if you will just be restoring them back anyways.
Click to expand...
Click to collapse
no probs, it worked like a charm!!
just trying to figure out the easiest way to get a nav bar to show up, without having to lower the screen dpi, or to maually edit the buildprop..
thanks!
wase4711 said:
no probs, it worked like a charm!!
just trying to figure out the easiest way to get a nav bar to show up, without having to lower the screen dpi, or to maually edit the buildprop..
thanks!
Click to expand...
Click to collapse
Use the terminal command on my rom
su
softkey_on
all info is in rom thread OP.
thanks, I thought I had read every terminal command in the thread, but I guess I didnt!
tun.ko or tap.ko?
I'm trying to get openvpn to work on REFLEX2.0 in tap mode. Looks like I need a tap.ko kernel module for either the stock kernel or the CivZ-StormBorn_Rev2.0-OC kernel. Anyone know where I might find such a thing?
---------- Post added at 03:59 PM ---------- Previous post was at 03:54 PM ----------
I notice the CivZ-StormBorn_Rev2.0-OC kernel has no /proc/config.gz file. That means the kernel was not compiled with the CONFIG_IKCONFIG option. Is there a way to see what options are baked in to the kernel?
Problem with softtouch Key "back"
hi everyone. I enebled softtouch Keys, but softtouch Key "back" doesn't work correctly. sometimes, it doesn't work, and i must tap it a lot of times.
Why i have with problem?
thanks in advance.
USB Mass Storage Unexpectedly Removed Loop
Hi,
Not sure if I am posting this in the right spot but I am getting a mass storage device unexpectedly removed loop message whenever I attached my USB flash drive? I am using the V2.1 ROM and kernel so wondering if anyone else is facing this same issue? Thanks!
MrAlexey said:
hi everyone. I enebled softtouch Keys, but softtouch Key "back" doesn't work correctly. sometimes, it doesn't work, and i must tap it a lot of times.
Why i have with problem?
thanks in advance.
Click to expand...
Click to collapse
i have better luck if i tap at the bottom of the softkey. it's almost as if the icon is bigger than the actual location that the press registers.
Chrome screen bug solution
Basically the problem is the notification bar, combined with the lack of on-screen softkeys. In order to fix it, you need the following:
Xposed Framework:
http://mohammadag.xceleo.org/public/Android/XposedInstallerDownloadUnsigned.apk
How it works:
http://forum.xda-developers.com/showthread.php?t=1574401
App Settings manager:
http://mohammadag.xceleo.org/public/Android/Xposed/AppSettings_0.4.apk
I've been using this combination on my tablet for a while now. It lets me change the resolution for individual apps. For instance, I want the tablet mode of Gmail, but I want my tablet to run in phablet mode so that I get the top notification bar and no softkeys.
The Chrome fix is simple. The app settings for the Chrome executable should have the fullscreen option toggled, the DPI set to 160, and the screen resolution set to 800x1200. It then hides the notification bar on top while you're in the browser, and shifts the screen that quarter of an inch where it is offset due to the Chrome bug on tablets without softkeys. If you need to access the notification bar, simply swipe down on the screen from the top edge and it will pop up.
If the print size is too small, you can use the accessibility settings in Chrome to scale up the font size.
acfc81 said:
Hi,
Not sure if I am posting this in the right spot but I am getting a mass storage device unexpectedly removed loop message whenever I attached my USB flash drive? I am using the V2.1 ROM and kernel so wondering if anyone else is facing this same issue? Thanks!
Click to expand...
Click to collapse
Hi,
Please ignore my last message as the issue was using the wrong kernel on my part. Thanks!
Question
I'm thinking of flashing a new ROM having used stock for month or so now. My concern is regarding the apps I have installed and am currently using, specifically FolderMount.
If I flash a new ROM (either civs older 4.1 build or his newer 4.2 one depending on how he is progressing), will I lose the links?
I have about 25GB worth of game obb and data transferred over from my internal memory to my micro SD. I dont fancy using up all my download allowance having to re- download and install all of those (plus the time it takes to transfer them all over). I dont mind losing the layout of my homescreens as I'm thinking of shaking that up anyway.
I've only one past experience of flashing a Rom and that ended up with me having to reinstall and set up all my apps (jump from ICS to JB on my Asus TF101)
flex beam 4.2.2 download unsuccessful
flex beam 4.2.2 download unsuccessful
Please upload
Hey everyone,
Whenever I decide to step away from stock and try a new custom ROM (latest being cm11), my phone won't go a day(well, more like 5 hours) without rebooting and hanging at the boot animation. I'm not sure if its the number of apps i install (like 30 including gapps), or something I'm missing, but its not limited to just one rom. I've tried miui, dirty unicorns, revolt, paranoidandroid, all great ROMS, but they don't LAST!
I'm really sorry if I seem like I'm repeating an already-asked question, but I've researched this problem and tried suggestions such as going back to stock and retrying, using Darkside scripts to wipe, wiping cache and dalvik cache and rebooting, wiping android.secure or moving apps away from sd card, etc. Nothing works. So for now I'm back on stock and not enjoying it I just wanted to know if theres anyone that might have any idea how to fix this?
Thanks!
EDIT: To sum up the thread so far, now instead of wiping completely everytime this occurs, i just need to do a battery pull to fix it. However, its really annoying to do 3-4 times a day. Another thing I might note is that my device is refurbished(mentioned below). I did more research and found some fix perms script reccommended by Real_Pariah, which was supposed to fix the issue. It didn't. Also same problem does happen with stock, I've just never stuck with it long enough to find out. At UltimaniumX's suggestion, I did a logcat, which is attached on the last post. Thanks UltimaniumX for your help so far!
So the way I understand it, you've flashed different custom ROMs and they work fine, but after an unspecified amount of time they decide to reboot and hang?
What is the exact process you're using to flash the custom ROMs? As well, each ROM has a specific method to get it working on your phone.
What recovery are you using and what version is it?
What radio are you using?
UltimaniumX said:
So the way I understand it, you've flashed different custom ROMs and they work fine, but after an unspecified amount of time they decide to reboot and hang?
What is the exact process you're using to flash the custom ROMs? As well, each ROM has a specific method to get it working on your phone.
What recovery are you using and what version is it?
What radio are you using?
Click to expand...
Click to collapse
Yep, that's correct. As for exact process, usually I just full wipe everything but sd, then flash.
For my kitkat roms(paranoidandroid, cyanogenmod 11, beanstalk), i flashed used cwm recovery 6.0.4.3. For jelly bean i used either twrp 2.4.4.0 or cwm 5.x(this was in earlier attempts as that was the recovery a guide on galaxys2root instructed me to flash to root stock in the first place). All used radio UVMC6.
Even on stock it happened, but I was able to fix by wiping cache and dalvik plus removing external sd.
When I first rooted, my major issue was getting the rom to get past the animation screen while hanging, and that still occurs, though lately I've been having some success using rom manager from stock to get to cm11(without ext sd). However that does reboot eventually. The first time I was able to fix it by wiping system, android.secure, cache, and dalvik and then reflashing, but it just happened again and that method doesn't seem to be working...
It's interesting that it's happening to all different ROMS that you install. There's a possibility that it's hardware related and not software related. Though I may not be the best to offer advice (since I've only been here for about a year), I recently installed Beanstalk after going through several troubleshooting steps that I finally resolved.
I know that my friend and I both have an SG2. We installed Jedi Knight 6 (which is an older ROM now) but one of the most important steps that he missed, was that he didn't leave his phone idle for 10 minutes after booting it up for the first time. I recall he had issues with apps not working, force-closing, and irregular reboots on his phone. This may or may not been an issue for you, but for awareness sake I leave it here.
If you want you can give Beanstalk another try since I have some experience trying to get it to work. Beanstalk requires you to use a very specific recovery, and I used TWRP 2.6.1.0 straight from the author's post. I wouldn't suggest using a higher version just because KitKat is new.
- I used INFAMOUS wipe cache to clear everything, and then I did a full wipe (including preload) using TWRP.
- Install Beanstalk 4.4 and the 4.4 GAPPS
- Boot and let sit for 10 minutes.
Once you know for sure that it's been 10 minutes, run the "Android Terminal Emulator" and do a logcat. Here's how to do it:
- Type su
- Type logcat -d -f /sdcard/logcat.log , it will save a .log file where your sdcard is.
- At this point, I guess you would have to leave it running until your phone decides to reboot. Then take that file from your SD and examine it on your computer.
http://wiki.cyanogenmod.org/w/Doc:_debugging_with_logcat
See if that helps. Fixing Permissions may also help reset some of your system settings. If it does the reboot loop, try rebooting into recovery, Fix Permissions, and reboot it again.
Alright I'll try Beanstalk, nothing to lose except my cookie clicker progress
Funny same thing happened in stock but was fixed in stock recovery with simple data wipe. I remember about hearing someone downgrading to ics because of "jelly bean bugs", so if beanstalk doesn't work out I'll try that!
(Couldn't straight reply/quote cause I can't post links yet)
EDIT: can't find beanstalk thread, at least cant find one mention twrp, so i wasnt sure if i was on the right one
Alright Beanstalk up and running, waited 10 minutes, and ran logcat command, however, it went back to prompt after running, so I'm not sure if its running in the background or if it dumped the current log and stopped. I kept terminal running just in case.
Quick side question, do you know if beanstalk disables long press home for recent apps? When I try long-press home it brings up the bottom menu instead.
Also, thanks for your help
So Beanstalk was running all fine and dandy as usual when a random reboot occured. However this time it actually got past the bootanimation. But, it asked me to set the default launcher again and terminal wasn't working(no text on screen). So I rebooted and whaddya know, stuck at bootanimation. Tried fixing perms, didn't work.
I tried wiping cache and dalvik, and reinstalling(which after restarting twrp asked if i wanted root and i said no, maybe thats significant?), nope, now no bootanimation. :'(
I forgot to mention that it is refurbished, so maybe that's of significance? Honestly though, now I'm at a loss of ideas.
avbluestar14 said:
Alright Beanstalk up and running, waited 10 minutes, and ran logcat command, however, it went back to prompt after running, so I'm not sure if its running in the background or if it dumped the current log and stopped. I kept terminal running just in case.
Quick side question, do you know if beanstalk disables long press home for recent apps? When I try long-press home it brings up the bottom menu instead.
Also, thanks for your help
Click to expand...
Click to collapse
If you followed the logcat instructions, the file logcat.log is now saved in your sdcard. The Terminal Emulator would not show anything other than that the logcat has been created. Now all you need to do is go to your SD card and grab that file "logcat.log", it will contain a lot of information regarding the state that your phone is in. It's good that you kept the terminal emulator running otherwise the file would not populate with anything. If you can, attach the logcat so we can see it.
Beanstalk long-press home button should show recent apps like normal. I can't remember if the default launcher shows it, since I use Nova Launcher and can confirm that long-press still brings up recent apps.
avbluestar14 said:
So Beanstalk was running all fine and dandy as usual when a random reboot occured. However this time it actually got past the bootanimation. But, it asked me to set the default launcher again and terminal wasn't working(no text on screen). So I rebooted and whaddya know, stuck at bootanimation. Tried fixing perms, didn't work.
I tried wiping cache and dalvik, and reinstalling(which after restarting twrp asked if i wanted root and i said no, maybe thats significant?), nope, now no bootanimation. :'(
I forgot to mention that it is refurbished, so maybe that's of significance? Honestly though, now I'm at a loss of ideas.
Click to expand...
Click to collapse
Right, it seems like if this is occurring on all your ROMs, that may indicate something hardware-related. Again, it's difficult to diagnose. What happens when you go back to the stock rom? Is it T-Mobile's version and it works fine?
This may seem like a stupid question, but you have rooted your phone right?
UltimaniumX said:
If you followed the logcat instructions, the file logcat.log is now saved in your sdcard. The Terminal Emulator would not show anything other than that the logcat has been created. Now all you need to do is go to your SD card and grab that file "logcat.log", it will contain a lot of information regarding the state that your phone is in. It's good that you kept the terminal emulator running otherwise the file would not populate with anything. If you can, attach the logcat so we can see it.
Beanstalk long-press home button should show recent apps like normal. I can't remember if the default launcher shows it, since I use Nova Launcher and can confirm that long-press still brings up recent apps.
Right, it seems like if this is occurring on all your ROMs, that may indicate something hardware-related. Again, it's difficult to diagnose. What happens when you go back to the stock rom? Is it T-Mobile's version and it works fine?
This may seem like a stupid question, but you have rooted your phone right?
Click to expand...
Click to collapse
yeah, stock works fine. about the logcat..I had restarted to try and fix that home button issue like an hour after starting the logcat, which means i inadvertently stopped terminal. whoops. so, i will try beanstalk again, making sure to keep terminal running i guess. sorry about that! might as well see whats in the current logfile for now. also, yes phone is rooted.
I think we're out of options at this point. My last and only recommendation that I can think of is to just install TWRP 2.6.1.0 (and it HAS to be this), and do a full wipe of the phone.
That means:
- factory reset,
- wipe data
- wipe SYSTEM
- wipe cache
- wipe dalvik
- reinstall the same UVLC3 radio (you're on Tmobile I think right?)
- install Beanstalk, install the 4.4 GAPPS (make sure it's the 4.4 apps)
- reboot the phone from recovery.
- let sit for 10minutes
- run logcat to your sdcard,
- observe and post the logcat if the system reboots itself.
UltimaniumX said:
I think we're out of options at this point. My last and only recommendation that I can think of is to just install TWRP 2.6.1.0 (and it HAS to be this), and do a full wipe of the phone.
That means:
- factory reset,
- wipe data
- wipe SYSTEM
- wipe cache
- wipe dalvik
- reinstall the same UVLC3 radio (you're on Tmobile I think right?)
- install Beanstalk, install the 4.4 GAPPS (make sure it's the 4.4 apps)
- reboot the phone from recovery.
- let sit for 10minutes
- run logcat to your sdcard,
- observe and post the logcat if the system reboots itself.
Click to expand...
Click to collapse
right, isn't UVMC6 the latest? i already have beanstalk running after full wipe, if it don't work, im going to repartition with one of old gb roms and pit file and go from there. no reboot on beanstalk yet, logcat is running though. Googling it, a lot of gs2 have problem with this sort of thing it seems.
avbluestar14 said:
right, isn't UVMC6 the latest? i already have beanstalk running after full wipe, if it don't work, im going to repartition with one of old gb roms and pit file and go from there. no reboot on beanstalk yet, logcat is running though. Googling it, a lot of gs2 have problem with this sort of thing it seems.
Click to expand...
Click to collapse
well beanstalk restarted on friday, can't find anything significant in logcat except for sometimes a long list of apps with perm issues,,,even stock has this reboot problem, but a battery pull+cache wipe fixes it(i hope). After googling, many have this problem with jb... maybe ill try an ics rom or something
hmm, back on cyanogenmod 11, and when it stuck at boot, a battery pull did the trick...running logcat overnight.
Well, here's the logcat, perused through, not sure if the errors I'm seeing are normal or not...honestly I wouldn't know what's contributing to the random reboot, and I'm not reporting it to cyanogenmod because I'm not sure if its a fault of their rom, my phone, or me lol
I took a look at the logcat, and there doesn't seem to be anything that would show a fatal error of some sort. Unfortunately there isn't a guide on how to read logcats, so I'm going off of the little experience that I know. Did the logcat run up until the phone reboot?
Again this may seem like a stupid question, but you are sure that you're using an SGH-989 samsung galaxy s2 and not the I-1900 right?
UltimaniumX said:
I took a look at the logcat, and there doesn't seem to be anything that would show a fatal error of some sort. Unfortunately there isn't a guide on how to read logcats, so I'm going off of the little experience that I know. Did the logcat run up until the phone reboot?
Again this may seem like a stupid question, but you are sure that you're using an SGH-989 samsung galaxy s2 and not the I-1900 right?
Click to expand...
Click to collapse
Yep, logat was running up to reboot. It is a SGH-t989, ordered straight rom tmobile site refurbished. I still think its weird how a simple battery pull fixes it though, is it corrupted memory? or partitions? or some hardware on the device?
Sorry man, looks like there really isn't any other suggestions that I have.
There is another user who seems to be having the same issue as you.
http://forum.xda-developers.com/showthread.php?t=2573854
It looks like he was able to resolve it by slowly flashing ROMS starting from 4.1.2. You will have to ask him exactly how he did it, but his story of ROM issues seems exactly the same as yours.
UltimaniumX said:
Sorry man, looks like there really isn't any other suggestions that I have.
There is another user who seems to be having the same issue as you.
http://forum.xda-developers.com/showthread.php?t=2573854
It looks like he was able to resolve it by slowly flashing ROMS starting from 4.1.2. You will have to ask him exactly how he did it, but his story of ROM issues seems exactly the same as yours.
Click to expand...
Click to collapse
Ah I saw that thread, new plan of action:
1. Hard reset, go to stock, try it for a day, see if it randomly reboots.
2. If it does, get a replacement after Christmas since 90-day warranty. If it doesn't, try AOSP 4.1.2.
3. If AOSP 4.1.2 doesn't reboot, go from there.
Well, I'll make sure to update after I get through. Thanks again!
Well, RMA'ed and now everything's working fine, running latest beanstalk, so i guess some partitioning or hardware issue? Oh well, thanks for your help!