I need to migrate to JB but am unable to find any compatible rom. I am using Bell version I747m. Please any suggestions. Currently using kyan 1.5
also would like help with updating CWM, currently using 5.0.4 version.
Merci!!!
First question would be do you want Touchwiz or more of a pure android build (jellybean without touchwiz)? Anything in this forum (the AT&T, Rogers, Bell, Telus section) should work on your phone. Just be wary of flashing modems, they are carrier specific so you should only flash modems for Bell. Here is a nice summary of available stuff for you.Included in the link I gave you, recoveries are also covered including the newest cwm, Although might I suggest giving twrp recovery a try. It's a great touch based recovery with many more options than cwm. The only hiccup with twrp is finding your internal sd card which is located at /data/media. Here is link to a post in the twrp recovery thread that has a cwm flashable version of the newest twrp recovery for ease of installation.
READ FORUM RULES BEFORE POSTING
You checked "yes this is a question"
Guess where it goes
Moved to Q&A
Friendly Neighborhood Moderator
Thank you so much jethro650 I am trying trwp right now wil let you know how it works. As of for the roms I tried few miui, and some others but it always fails. I think because of the file ext .d2att. I think it does not recognises it. Any suggestion or am I doing something wrong?
I think if you install the latest recovery either cwm or twrp you'll find flashing rom's easier and less errors. Some of the earlier versions of cwm looked for a file in your build.prop and if it wasn't right you'd get error status 6 or 7. It was a failsafe so you couldn't flash the wrong version of a ROM. Now that its known that AT&T, Bell, Telus, Rogers can run the same ROM recoveries are a little more lenient in that respect.
Thanks so much I just installed twrp and m loving it will try again(faster thn cwm). Trying ARISTODEMO rom right know. hopefully will work.
yes my firend u were right updating recovery does work and new rom is running smmoth thanks once again..
My daily driver
Tried this one:
http://forum.xda-developers.com/showthread.php?t=1869300
50GB in dropbox for international version , configurable toogles, super stable. That's my daily driver so far, more features look in the changelog in their website.
I came from Kyan to this rom and is worthy.
Hope it helps,
It's jeally bean by the way
amonrule said:
yes my firend u were right updating recovery does work and new rom is running smmoth thanks once again..
Click to expand...
Click to collapse
Glad its all working for you. Happy flashing
amonrule said:
I need to migrate to JB but am unable to find any compatible rom. I am using Bell version I747m. Please any suggestions. Currently using kyan 1.5
also would like help with updating CWM, currently using 5.0.4 version.
Merci!!!
Click to expand...
Click to collapse
My daily use build is http://forum.xda-developers.com/showthread.php?t=1869300.
It has proven to be stable with only a minor glitch here or there. You can also use Mobile Odin to flash ROMs if you like. I have used that and CWM with succes.
Thanks ATS2 trying now, the serenity dg
My friend Bought a SGSIII from Telus, i hope to get one to if this all works, and we were using the Android toolkit 2.3 to get Clockwork and TWRP onto the phone which worked(we tried both and got errors which ill show in pics)
When i copy the latest CM nightly to his SD and try to fail, i get this 'assert failed' error. Screenshot attached.
Current its on stock and rooted, but thats as far as we can go.
IS there a fix for this? I flashed using the latest toolkit.
Also, i cant seem to find a definitive answer on these forums regarding this, just alot of uncertainty and different opinions.
1.) Is there any harm in flashing a Rogers modem on a Telus device, or vice versa, wouldnt that just convert the phone into another carriers device since they carry it to.
2.) Are there ANY restrictions on what can be flashed, i realize 90% of roms will be AT&T, is there any chance of bricking by using this.
Thanks!
Update to newest cwm, or use twrp
Open the updater-script and delete the first few lines which check if you are flashing on the correct device.
Alternatively, you can just change your build.prop to "d2att" and it will flash. I'm pretty sure that the i747m will run the i747 ROMs, as long as you have the right radio flashed.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Got it all goin! Thanks guys!
Rekzer said:
Got it all goin! Thanks guys!
Click to expand...
Click to collapse
What was the resolution?
Tony_YYZ said:
What was the resolution?
Click to expand...
Click to collapse
Steps were
Use Tooklit to Install TWRP and Root Phone
Download a build.prop editor and change all d2can to d2att
Reboot phone
Install goo manager, menu button, install recovery script(should install the d2att one)
Reboot into recovery..flash CM
CM's self updater works after this cause i think the ATT boot loader is on there. Very good stuff!
You COULD maybe skip alot of it, and install the ATT boot loader from the toolkit, but this is what worked for me on 3 devices(coworkers/mine)
Or, you could have used ROM manager to upgrade to cwm 6.0.1.2 or newer.
Rpm manager supports sgs3? I was under the impression never use rom manager from s2 days.
Suped up S3
It works on s3. I've used it a couple times. Worked great on my old Inspire too.
I've tried 2.7.1 and 2.7.0 of TWRP for both Tmo and the Canada version they have, they all install fine, but when I try and do anything, it can't mount any partitions, so I can't wipe or install anything. I am rooted with the root66 of the latest Wind firmware.
Any other wind users know a good working TWRP ?
getochkn said:
I've tried 2.7.1 and 2.7.0 of TWRP for both Tmo and the Canada version they have, they all install fine, but when I try and do anything, it can't mount any partitions, so I can't wipe or install anything. I am rooted with the root66 of the latest Wind firmware.
Any other wind users know a good working TWRP ?
Click to expand...
Click to collapse
Are you running a custom rom and/or kernel? Im wondering if this may have something to do with selinux. If not using one already, try flashing an insecure custom kernel. You might also want to try flashing CWM, just to see if it has the same issue.
DocHoliday77 said:
Are you running a custom rom and/or kernel? Im wondering if this may have something to do with selinux. If not using one already, try flashing an insecure custom kernel. You might also want to try flashing CWM, just to see if it has the same issue.
Click to expand...
Click to collapse
Thanks for the reply.
I'm not sure, I'm only running stock+root from the root66 package for the MK5 ROM for my phone from Wind in Canada. I tried installing CWM and it ran the first time, tried clearing cache to see if it had any permission/mount errors, and it froze, pulled the battery and wouldn't boot anymore. Had to reflash root66 package to get my phone to even boot. Rootchecker says I'm rooted fine, SU gives permissions to everything fine, busybox is fine. Donwload mode shows security bit disabled, so the root66 disabled knox. Not sure what to do try next.
EDIT
Installed CWM from ROM-Manager, and it worked, installed liewise ROM and it's working fine. I unno. lol.
getochkn said:
Thanks for the reply.
I'm not sure, I'm only running stock+root from the root66 package for the MK5 ROM for my phone from Wind in Canada. I tried installing CWM and it ran the first time, tried clearing cache to see if it had any permission/mount errors, and it froze, pulled the battery and wouldn't boot anymore. Had to reflash root66 package to get my phone to even boot. Rootchecker says I'm rooted fine, SU gives permissions to everything fine, busybox is fine. Donwload mode shows security bit disabled, so the root66 disabled knox. Not sure what to do try next.
EDIT
Installed CWM from ROM-Manager, and it worked, installed liewise ROM and it's working fine. I unno. lol.
Click to expand...
Click to collapse
Sorry that caused you so much trouble. When you are booted into recovery though, whether or not the rom is rooted makes no difference. What is important here is if the kernel is secure or insecure. I am still fairly certain selinux was causing you your problems with mounting though. If you are running any rom based on my Sprint ND8 port (such as likewise), you shouldn't have anymore problems (if I am correct about it being selinux of course). The kernel included has selinux disabled. Glad you got it working though.
Just curious, what do you mean by download mode shows security bit disabled? I think you might mean selinux? The warranty bit, which is often referred to as the knox counter cannot be disabled and is actually separate from Knox itself. Removing knox is something done only in the rom, not the kernel, and has no effect on what is shown in download mode. Also, selinux is not knox, they are two different technologies. Just fyi for future reference.
getochkn said:
I've tried 2.7.1 and 2.7.0 of TWRP for both Tmo and the Canada version they have, they all install fine, but when I try and do anything, it can't mount any partitions, so I can't wipe or install anything. I am rooted with the root66 of the latest Wind firmware.
Any other wind users know a good working TWRP ?
Click to expand...
Click to collapse
how i did my wind s3 is
Unified_Android_Toolkit_v1.2.8 seemed to work for me
DocHoliday77 said:
Sorry that caused you so much trouble. When you are booted into recovery though, whether or not the rom is rooted makes no difference. What is important here is if the kernel is secure or insecure. I am still fairly certain selinux was causing you your problems with mounting though. If you are running any rom based on my Sprint ND8 port (such as likewise), you shouldn't have anymore problems (if I am correct about it being selinux of course). The kernel included has selinux disabled. Glad you got it working though.
Just curious, what do you mean by download mode shows security bit disabled? I think you might mean selinux? The warranty bit, which is often referred to as the knox counter cannot be disabled and is actually separate from Knox itself. Removing knox is something done only in the rom, not the kernel, and has no effect on what is shown in download mode. Also, selinux is not knox, they are two different technologies. Just fyi for future reference.
Click to expand...
Click to collapse
Ah. Maybe I was looking at the QualcomSecureboot or something
Either way, all is good. Not sure why TWRP gave problems or CWM did via Odin. I'm using likewise rom, which is based off your sprint so shouldn't have any more problems now anyways. Not a stranger to flashing Samsung phones, just my first newer samsung flash with this whole knox/selinus thing and all that. My old sammy S 4G was flashed hundreds of times while I worked on ROMs'. lol.
Rickyfk said:
how i did my wind s3 is
Unified_Android_Toolkit_v1.2.8 seemed to work for me
Click to expand...
Click to collapse
Be careful with that! I always advise against using it because it is very rarely updated, the op does not provide any support for it, and it has bricked several devices.
yes i forgot that in my post i always back ups of everything before i do anything.
i have also fixed bricked devices befor also but ya you have to be carful tho.
DocHoliday77 said:
Be careful with that! I always advise against using it because it is very rarely updated, the op does not provide any support for it, and it has bricked several devices.
Click to expand...
Click to collapse
i have the same problem
getochkn said:
I've tried 2.7.1 and 2.7.0 of TWRP for both Tmo and the Canada version they have, they all install fine, but when I try and do anything, it can't mount any partitions, so I can't wipe or install anything. I am rooted with the root66 of the latest Wind firmware.
Any other wind users know a good working TWRP ?
Click to expand...
Click to collapse
my phone is wind T999V, rom is original JB 4.3.
i use root66 rom. i want to downgrade, i want to use twrp to copy system, but , all is no no no , sad.:crying:
welcome2you said:
my phone is wind T999V, rom is original JB 4.3.
i use root66 rom. i want to downgrade, i want to use twrp to copy system, but , all is no no no , sad.:crying:
Click to expand...
Click to collapse
Not sure what you mean there, sorry. But you cannot downgrade your firmware, but you can flash an older rom from TWRP.
DocHoliday77 said:
Not sure what you mean there, sorry. But you cannot downgrade your firmware, but you can flash an older rom from TWRP.
Click to expand...
Click to collapse
i want to use twrp,but cannot find partition, i want to downgrade to 4.1 ,then i can unlock my phone , but i have no way to finish it.
welcome2you said:
i want to use twrp,but cannot find partition, i want to downgrade to 4.1 ,then i can unlock my phone , but i have no way to finish it.
Click to expand...
Click to collapse
How are you trying to install TWRP? There are several ways to do so. Odin, recovery, Goo.Im app..... You can get the twrp files from my sig if you want to try those. No guarantee you will be able to unlock when flashing the 4.1.1 modem, let us know if it works for you.
I had tried TWRP through Odin flashable and also Goo Manager. I tried 2.7.0 and 2.7.1, both Tmo and Can version, and none could mount anything . CWM through Rom Manager works great though.
I know, from my experience working on ROM's and getting the first Heimdall flashable package to upgrade the Galaxy S 4G from Wind, that the Wind models of phones are slightly different than the Tmo versions. It took me a dev a while to find the right files, lots of soft bricking ,etc, to figure out the minute difference to allow Heimdall to flash a package, and even then, Heimdall could never flash a modem to the 4G-Wind Variant. I even tried working with the Heimdall dev to find out why, and never could. Modems would flash from CWM or TWRP, but not from the PC, even though Tmo firmwares and ROM's worked, so maybe the Wind phone is slightly different in partition layout that CWM can adapt for, but TWRP can't. Maybe I'll contact the TWRP team and see if I can help them figure out why, although now I'm working a lot more than I was and don't have a lot of time to flash my phone 100 times and brick it and flash again like in the older days.
getochkn said:
I had tried TWRP through Odin flashable and also Goo Manager. I tried 2.7.0 and 2.7.1, both Tmo and Can version, and none could mount anything . CWM through Rom Manager works great though.
I know, from my experience working on ROM's and getting the first Heimdall flashable package to upgrade the Galaxy S 4G from Wind, that the Wind models of phones are slightly different than the Tmo versions. It took me a dev a while to find the right files, lots of soft bricking ,etc, to figure out the minute difference to allow Heimdall to flash a package, and even then, Heimdall could never flash a modem to the 4G-Wind Variant. I even tried working with the Heimdall dev to find out why, and never could. Modems would flash from CWM or TWRP, but not from the PC, even though Tmo firmwares and ROM's worked, so maybe the Wind phone is slightly different in partition layout that CWM can adapt for, but TWRP can't. Maybe I'll contact the TWRP team and see if I can help them figure out why, although now I'm working a lot more than I was and don't have a lot of time to flash my phone 100 times and brick it and flash again like in the older days.
Click to expand...
Click to collapse
As far as partition layout goes, all of the T999 and I747 variants are the same. I believe the Sprint and Verizon ones are as well, but am not 100% confident in that. You said you tried the d2can and d2tmo versions, but what about d2lte? Everyone should be just using d2lte now as ALL the S3 models have been consolidated into that one. Where did you download it from btw? You can get it from the link in my sig. I know for sure it works. (I think I still need to add 2.7.0.1 though. But 2.7.0.0 is there.)
DocHoliday77 said:
As far as partition layout goes, all of the T999 and I747 variants are the same. I believe the Sprint and Verizon ones are as well, but am not 100% confident in that. You said you tried the d2can and d2tmo versions, but what about d2lte? Everyone should be just using d2lte now as ALL the S3 models have been consolidated into that one. Where did you download it from btw? You can get it from the link in my sig. I know for sure it works. (I think I still need to add 2.7.0.1 though. But 2.7.0.0 is there.)
Click to expand...
Click to collapse
I looked in your sig but don't see a D2LTE TWRP, only the 2.7.0 TMO one, which I downloaded from the official TWRP site, as well as 2.7.1 and neither worked. I also tried installing from Goo Manager. Maybe I'll try yours since it is a CWM flashable zip as opposed to an odin tarball and I have CWM working
getochkn said:
I looked in your sig but don't see a D2LTE TWRP, only the 2.7.0 TMO one, which I downloaded from the official TWRP site, as well as 2.7.1 and neither worked. I also tried installing from Goo Manager. Maybe I'll try yours since it is a CWM flashable zip as opposed to an odin tarball and I have CWM working
Click to expand...
Click to collapse
Ill have to double check that later. Been a while since I've flashed recovery. I know I am using the one in my repo though, so it should work fine whether its d2tmo or d2lte
Hello to all.
I have been through most forums/sites/experts writings for some several months now and have found totally confusing & conflicting reports as to what I can & cannot download onto my:
S3 SGH- i747M (Canada)
KOT49H.I747VLUFOB3
The phone is Unlocked (Carrier) Rooted and TWRP 2.8.7.0 installed and working great. SuperSU & Busybox are likewise there and OK
Would someone point me into the direction of the latest ROM possible to get on this phone please and tell me what to do? (Do I need to change build.prop from d2can to d2att for instance?)
This old phone is fully functional and is just an older toy now. It's just being used as an iPod (Sorry, best description I could think of!!!) but it’s nice to play with and I would like to get it more up to date.
Thanks in advance for any help and updated advice on my problems.
You can flash any rom designed for the d2att or d2lte. Just copy the rom the the phone's internal memory or an sd card, boot into twrp, wipe system, wipe cache, wipe data, flash rom and flash the version of gapps you want. The gapps version must match the rom; i.e., flash marshmallow gapps if you install a mm rom and LP gapps if you install an LP rom.
gpreen said:
Hello to all.
I have been through most forums/sites/experts writings for some several months now and have found totally confusing & conflicting reports as to what I can & cannot download onto my:
S3 SGH- i747M (Canada)
KOT49H.I747VLUFOB3
The phone is Unlocked (Carrier) Rooted and TWRP 2.8.7.0 installed and working great. SuperSU & Busybox are likewise there and OK
Would someone point me into the direction of the latest ROM possible to get on this phone please and tell me what to do? (Do I need to change build.prop from d2can to d2att for instance?)
This old phone is fully functional and is just an older toy now. It's just being used as an iPod (Sorry, best description I could think of!!!) but it’s nice to play with and I would like to get it more up to date.
Thanks in advance for any help and updated advice on my problems.
Click to expand...
Click to collapse
Thanks Audit13. All this d2att & d2lte & all the various Do's & Dont's has had me a bit worried. Thanks again.
gpreen said:
Hello to all.
I have been through most forums/sites/experts writings for some several months now and have found totally confusing & conflicting reports as to what I can & cannot download onto my:
S3 SGH- i747M (Canada)
KOT49H.I747VLUFOB3
The phone is Unlocked (Carrier) Rooted and TWRP 2.8.7.0 installed and working great. SuperSU & Busybox are likewise there and OK
Would someone point me into the direction of the latest ROM possible to get on this phone please and tell me what to do? (Do I need to change build.prop from d2can to d2att for instance?)
This old phone is fully functional and is just an older toy now. It's just being used as an iPod (Sorry, best description I could think of!!!) but it’s nice to play with and I would like to get it more up to date.
Thanks in advance for any help and updated advice on my problems.
Click to expand...
Click to collapse
Installed CM 13. Worked like a charm. No problems installing what-so-ever.
Thanks again Audit13