Related
I installed the rom 6 times. different ways to try and install. redownloaded the file but no matter how i try it, after the boot animation screen, the screen goes blank like it shut off.
im on CWM 5.0.2.3
What version of starburst did you flash?
Sent from my SPH-D710 using XDA App
sleshepic said:
What version of starburst did you flash?
Sent from my SPH-D710 using XDA App
Click to expand...
Click to collapse
1.9 then 1.9.5
If you continue to hit walls you can always try going back to stock and starting over. Some on the starburst forum have had luck with that. And you didn't wipe data or format system between 1.9 and 1.9.5? Only cache and dalvik?
Sent from my SPH-D710 using XDA App
kyhassen said:
1.9 then 1.9.5
Click to expand...
Click to collapse
Do you have a mirror for the 1.9?........deleted by accident.
yang704 said:
Do you have a mirror for the 1.9?........deleted by accident.
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=G7bC9qXqpg4&feature=youtu.be
have both 1.9 and 1.9.5
also i did wipe everything. after i did 1.9 booted up. went back to recovery and wiped Dcache and cache and still bugged.
an now with other roms i cant install kernals.. any idea?
kyhassen said:
I installed the rom 6 times. different ways to try and install. redownloaded the file but no matter how i try it, after the boot animation screen, the screen goes blank like it shut off.
im on CWM 5.0.2.3
Click to expand...
Click to collapse
Having the same issue
epic touch (loading starburst rom) shows the galaxy S boot like it should, then the screen seems to just go blakc, doesnt go into a boot cycle. I formatted the system , wipe data, wipe cache, wipe dalvik , in that order.
My procedure. Load odin, wipe the current zedomax kernal.tar with the root.
Root works great. Then flash the 6.1 zedo max ( for CM5 ). After that, i try to flash the staburst rom and it wont boot back up. i tried using the Lost kernal too.
I'm familiar with recovering it, so i'm able to get back to my backup and unroot the device no problem, just need help fixing the root. On my old EPIC, i had to do the one click root my self, then roms would load fine. please help!
---------- Post added at 10:47 PM ---------- Previous post was at 10:19 PM ----------
also on the video link from qbking77 on how to flash this rom
quite a few epic touch users are having the same problem =\
did u format the system before you wiped?
Same thing here. All I get.is boot animation then black screen. Bunk rom or something because ive tried everything. I've given up on this rom bit I really was looking forwatd to having tbis rom on my phone
If somebody finds a solution please post!
HELP...
Im having the same issue... i tried the starburst rom and once past the boot animation it goes black so i booted into recovery and tried to restore my nand and it isnt there like it was wiped during rom install... ok so after that i stayed in recorery downloaded the latest viper rom, flashed and the same thing happened.. i wiped\factory reset wiped dcache and cache every time i try a new rom... PLEASE HELP i just bought this phone from a freind and decided to root and now i cant even make my first call on it...
1. Boot into CWM recovery and make a Nandroid backup.
2. Format system under mounts and storage.
3. Wipe data/factory reset.
4. Wipe cache partition.
5. Wipe Dalvik cache under advanced.
6. Install StarburstROM. IF COMING FROM 1.8 YOU MUST FOLLOW THE ABOVE STEPS EACH TIME THEN INSTALL 1.9. THEN DO THE SAME AND INSTALL 1.9.5.
7. Wiping data may not be necessary but I would do it anyways then reboot, let it run for a few minutes, boot back into CWM and from the advanced restore menu restore just your data from the Nandriod backup you made.
---------- Post added at 01:00 PM ---------- Previous post was at 12:48 PM ----------
tobiasunruh said:
Im having the same issue... i tried the starburst rom and once past the boot animation it goes black so i booted into recovery and tried to restore my nand and it isnt there like it was wiped during rom install... ok so after that i stayed in recorery downloaded the latest viper rom, flashed and the same thing happened.. i wiped\factory reset wiped dcache and cache every time i try a new rom... PLEASE HELP i just bought this phone from a freind and decided to root and now i cant even make my first call on it...
Click to expand...
Click to collapse
Your Nandroid is still there it's just on your internal SD card. If you were using a kernel with an early version of CWM it backed up to the internal SD card. The latest version the dev's are incorporating into their ROMs now backs up to the external SD card. Just Odin back to whatever previous ROM/kernel you were on then boot up and copy the Clockwork folder to your external SD card. Then follow the directions I posted above for flashing StarburstROM.
IA-32e said:
1. Boot into CWM recovery and make a Nandroid backup.
2. Format system under mounts and storage.
3. Wipe data/factory reset.
4. Wipe cache partition.
5. Wipe Dalvik cache under advanced.
6. Install StarburstROM. IF COMING FROM 1.8 YOU MUST FOLLOW THE ABOVE STEPS EACH TIME THEN INSTALL 1.9. THEN DO THE SAME AND INSTALL 1.9.5.
7. Wiping data may not be necessary but I would do it anyways then reboot, let it run for a few minutes, boot back into CWM and from the advanced restore menu restore just your data from the Nandriod backup you made.
---------- Post added at 01:00 PM ---------- Previous post was at 12:48 PM ----------
Your Nandroid is still there it's just on your internal SD card. If you were using a kernel with an early version of CWM it backed up to the internal SD card. The latest version the dev's are incorporating into their ROMs now backs up to the external SD card. Just Odin back to whatever previous ROM/kernel you were on then boot up and copy the Clockwork folder to your external SD card. Then follow the directions I posted above for flashing StarburstROM.
Click to expand...
Click to collapse
Thanks for the help but I'm new to Samsung devices... Can you give instructions on how to restore with Odin?
Edit... I just check my external and it has a clock work folder on it.. The only thing in it is a file named ".salted_hash" and that's it..
Sent from my PG86100 using xda premium
tobiasunruh said:
Thanks for the help but I'm new to Samsung devices... Can you give instructions on how to restore with Odin?
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
Here's an excellent tutorial. This is my first Samsung device as well and the directions are pretty clear cut. I used Windows 7 64 Bit.
http://forum.xda-developers.com/showthread.php?t=1274337
---------- Post added at 01:38 PM ---------- Previous post was at 01:20 PM ----------
tobiasunruh said:
Edit... I just check my external and it has a clock work folder on it.. The only thing in it is a file named ".salted_hash" and that's it..
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
Bummer man. Not sure how that happened unless you formatted your SD card accidentally.
IA-32e said:
Here's an excellent tutorial. This is my first Samsung device as well and the directions are pretty clear cut. I used Windows 7 64 Bit.
http://forum.xda-developers.com/showthread.php?t=1274337
---------- Post added at 01:38 PM ---------- Previous post was at 01:20 PM ----------
Bummer man. Not sure how that happened unless you formatted your SD card accidentally.
Click to expand...
Click to collapse
Do you think you could point me in the right direction to start over from stock? Like a tutorial on how to start over with a new boot image or a way to get past the boot animation?
Sent from my PG86100 using xda premium
tobiasunruh said:
Do you think you could point me in the right direction to start over from stock? Like a tutorial on how to start over with a new boot image or a way to get past the boot animation?
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
Everything you need is in the Android Development section.
http://forum.xda-developers.com/showthread.php?t=1282420
IA-32e said:
Everything you need is in the Android Development section.
http://forum.xda-developers.com/showthread.php?t=1282420
Click to expand...
Click to collapse
Thanks I'll give it a try.. Let you know what happens..
Edit...
That worked.. I'm back to stock with no root.. Thanks for the help greatly appreciated...
Sent from my PG86100 using xda premium
well i finally got my starburst rom working... but why does the media not. i cant play music, veiw pictures, or play videos.
Is that v1.9.5? If so what version did you upgrade from? People are having some problems when upgrading to 1.9.5.
Same issue. Tried multiple times, followed instructions to a T. Phone just goes black after flashing Starburst. Now I can only go to recovery or download mode. I couldn't install my nandroid backup (don't know why, based on filename it seemed like an old one from a different phone, not the one I did today).
Trying to go back to stock following
http://forum.xda-developers.com/show....php?t=1274337
but I'm on a MAC, and can't figure out how to heimdall a ROM. I can flash a kernel using heimdall, but don't know the commands and flashing order for the stockEG30.tar in terminal using heimdall. I also downloaded the frontend suites for heimdall, but can't figure out where to place stockeg30.tar files.
Any help? I have no windows machines.
in order to install starburst v1.9.5 you must have v1.9 installed first (recommended w/ flashing zedomax kernal or lost kernal in CWM after reboot), make sure phone is rooted properly and CWM is installed if not already (can be done via download mode w/ odin)
download v1.9 here:
http://dev-host.org/z1jsf3k9lh44/stable_epic_starburst_10.27.11_v1.9_.zip
to get this on your sdcard you will have to mount through usb on cwm via mounts and storage and connect to your pc
follow rom flash instructions as usual in cwm:
format system through mounts and storage
wipe data
wipe cache
wipe dalvik through advanced
install zip from sdcard
reboot
wait a few minutes booted
then set up your phone
next flash/install either zedomax kernal or LOSt kernal via CWM
forums and downloads found here:
http://forum.xda-developers.com/forumdisplay.php?f=1284
wipe cache and dalvik before for flashing through cwm
reboot
next download v1.9.5 here:
http://forum.xda-developers.com/showthread.php?t=1276320
make sure it is saved to the root of your sdcard from which you want to install
next all you have to do is flash v1.9.5 over v1.9
do not format system
do not wipe data
do not wipe cache
do not wipe dalvik
install from sdcard
reboot
video to flash v1.9.5 found here found here:
http://www.youtube.com/watch?v=G7bC9qXqpg4&feature=youtu.be
Ok I looked all over the place and I could find anything about this issue. I have the telus s2x t989d and I went on rom manager and downloaded cyanogenmod 9 for my phone( only one available). Then I went in to install it and when it finished it just stayed on the really cool cyanogen boot screen and I had to power off and restore. Ive tried it a few times and nothing changed. I wiped the cache and stuff too. what should I do?
Are you trying to lead it directly from the app or are you trying to flash from recovery? Rom manager is buggy on the t989/t989D series. Flashing from an app is not recommended AT ALL due to potential of bricking the device
I guess my question is, what's your exact process you took...(i.e. steps taken)
sent from my T989 full of CM awesomeness and a touch of Venom from the Darkside!!
Ya I have been using the app. Can I still use the app to download roms? And then can I go into recovery from the app or just exit it and reboot it myself?
LostMoonOfPoosh said:
Ya I have been using the app. Can I still use the app to download roms? And then can I go into recovery from the app or just exit it and reboot it myself?
Click to expand...
Click to collapse
its recommended to simply download the rom zip the boot into recovery and install there. I use cm9 stable with tdj Darkside kernel 6 and flash everything through twrp recovery never had a single boot loop in any room I've flashed. What rom are you running currently?
1.Download rom and place in external sd card.
2. Reboot into recovery
(You may want to wipe data/factory reset depending on what rom you are running and clean install are typically recommended unless coming from a previous version from same developer (i.e. cm, aokp, etc)
3. Flash darkside super wipe and cache wipe if using cwm non touch
4. Flash rom, gapps and kernel (if so desired on the gapps and kernel)
5. Reboot and wait 10mins
6. Reboot again and have fun!
Let me know if that helps
sent from my T989 full of CM awesomeness and a touch of Venom from the Darkside!!
EnigmaticGeek said:
its recommended to simply download the rom zip the boot into recovery and install there. I use cm9 stable with tdj Darkside kernel 6 and flash everything through twrp recovery never had a single boot loop in any room I've flashed. What rom are you running currently?
1.Download rom and place in external sd card.
2. Reboot into recovery
(You may want to wipe data/factory reset depending on what rom you are running and clean install are typically recommended unless coming from a previous version from same developer (i.e. cm, aokp, etc)
3. Flash darkside super wipe and cache wipe if using cwm non touch
4. Flash rom, gapps and kernel (if so desired on the gapps and kernel)
5. Reboot and wait 10mins
6. Reboot again and have fun!
Let me know if that helps
sent from my T989 full of CM awesomeness and a touch of Venom from the Darkside!!
Click to expand...
Click to collapse
So I should just find the rom on my computer instead then?
Im downloading cyamogenmod 9 now from their website. I guess rom manager is pretty much useless for me then? I liked it because it would only show me roms that work for my phone so I dont make any mistakes.
ok I did it. but it didnt work... it just loaded up stock unrooted ics. with all my stuff gone. i have backups so im not worried about that, but i dont know why CM didnt flash...
LostMoonOfPoosh said:
ok I did it. but it didnt work... it just loaded up stock unrooted ics. with all my stuff gone. i have backups so im not worried about that, but i dont know why CM didnt flash...
Click to expand...
Click to collapse
I would use only super wipe
then flash ROM
reboot
wait ten minutes WITHOUT TOUCHING ANYTHING!!
reboot.
Its a proven formula that has worked for me, many, many times
---------- Post added at 06:06 PM ---------- Previous post was at 06:03 PM ----------
Also, super wipe and cache wipe are found here read OP carefully
http://forum.xda-developers.com/showthread.php?t=1477955
LostMoonOfPoosh said:
ok I did it. but it didnt work... it just loaded up stock unrooted ics. with all my stuff gone. i have backups so im not worried about that, but i dont know why CM didnt flash...
Click to expand...
Click to collapse
Stock unrooted ics? What recovery are you using, have you flashed a recovery through odin at all with this device?
EnigmaticGeek said:
Stock unrooted ics? What recovery are you using, have you flashed a recovery through odin at all with this device?
Click to expand...
Click to collapse
is work fist root then factory reset then flash.
kiruba8 said:
is work fist root then factory reset then flash.
Click to expand...
Click to collapse
You need to have a recovery flashed to your phone to even start the root process. Cwm, cwm touch, or twrp. All are available in the sticky section as well as development section. If you are running stock recovery then that's your primary issue.
sent from my T989 full of CM awesomeness and a touch of Venom from the Darkside!!
LoopDoGG79 said:
I would use only super wipe
then flash ROM
reboot
wait ten minutes WITHOUT TOUCHING ANYTHING!!
reboot.
Its a proven formula that has worked for me, many, many times
---------- Post added at 06:06 PM ---------- Previous post was at 06:03 PM ----------
Also, super wipe and cache wipe are found here read OP carefully
http://forum.xda-developers.com/showthread.php?t=1477955
Click to expand...
Click to collapse
Ok i looked at the darkside link you gave me. Will it for sure work with the telus version s2?
LostMoonOfPoosh said:
Ok i looked at the darkside link you gave me. Will it for sure work with the telus version s2?
Click to expand...
Click to collapse
Yes, the only difference between T-Mobile and Telus versions is cosmetic. Telus is the T989D, T-Mobile is the T989. There is a reason why they are so closely named.
Sent from the pink Unicorn from the Darkside.
EnigmaticGeek said:
Stock unrooted ics? What recovery are you using, have you flashed a recovery through odin at all with this device?
Click to expand...
Click to collapse
oh ya I have CWM recovery flashed so im good in that department. Im going to try out darkside superwipe now and see if that helps.
well I used darkside and then flashed my rom. Now it wont even go past the telus loading screen... Ive restored back again. I made it alot farther than this with rom manager haha. I actually saw the cyanogenmod opening cinematic... Ill try the darkside cache wipe this time and see if that helps. I downloaded the rom right from the cyanogen website...
Well neither is working. It just stays in the Telus loading screen. Not even the Samsung screen will load. I don't know what else to do...
Sent from my SGH-T989D using xda app-developers app
I flashed from CM9 FF18 to Calkulin Gingerbread through CWM.
I went through the process of wiping with the zip file, installing rom, then installing the bare rom.
My phone works fine except i can't install anything through the play store. (Error 492)
-I tried to fix by clearing data of play store... No dice.
- I tried to factory reset, but for some reason it just hangs when i try to, after 10 mins i just hit back.
-I can't get into CWM Recovery. I get to the CWM 5.0.2.7 screen but i can't access any menus!
So at this point i'm stumped. IDK if i screwed up somewhere, but not sure what to do. I can get into Download mode and into odin, but not sure what i should flash or even if i need to.
Before this i have flashed cm10 and cm9 no problem.
Any help guys?
id get a rom thats flased with odin and just start over....
Sent from my SPH-D710 using xda app-developers app
Might sound like a dumb question, but i'm having a hard time figuring out how to ODIN a rom. i've only done it through CWM
I know i need a PDA/Phone/CSC file correct? Where do i get these?
The easy way. http://forum.xda-developers.com/showthread.php?t=1433101
---------- Post added at 12:06 AM ---------- Previous post was at 12:05 AM ----------
Get the reset data version. You don't have to fuss with individual files.
Hi All, looking for a replacement for my xperia pro I found this phone. I'm pretty familiar with freexperia flashing and roms. Can I find something like that for this phone? I mean a decluttered rom that it's updated frequently. All captivates can be flashed to custom roms? do I need to unlock the bootloader or something like that?
Thanks!
Well long story short here this phone is real easy to root and flash a recovery onto. No bootloader unlock needed. And we have plenty of top-of-the line Roms that get updated often. :thumbup:
Sent from my SGH-i927 using xda premium
which rom are you using?
Vanilla root box 4.2.1 with the latest litekernal.
Sent from my SGH-i927 using xda premium
That is enough for now, thanks!
Sent from my MK16i using xda app-developers app
Hi again. I just got a used captivate from ebay. Looks like does have stock 4.0.4 I really want to install a decluttered rom since tethering is disabled by at&t. Is there a step by step tutorial to install new kernel and new rom? do I really need to backup imei as I read somewhere here? thanks!!
Hello,
from noob to noob my suggestion is to READ.
Consider to reserve your questions for something you are totally unable to face by yourself or you can't find by yourself just using "Search".
To answer your question, there's a huge "sticky" thread at the top of the general section. I'll find all the guides you need, including how to root, how to flash a recovery, and the thread related to new rom, each of them beginning with information and guide.
It's the very first thread.
No offense, i'm a noob me too.
for tethering... check the app store im sure there are free utilities that will allow you to tether ..
If you switch up your rom to JellyBean (as there are no stable FULLY working AOSP roms) you'll be missing some things.. ie: keyboard lights, pictures don't save with proper rotation, bluetooth headset, no ability to use skype ... some roms dont have wifi tethering working...
Rootbox 4.2.2 gives the best battery so far, keyboard lights don't work though...
Check out the "Everything SAmsung Glide" thread under development, read about the roms that are active and it should give you a great start!
Welcome to the community!
reading I think the best thing to do at this time is just root stock?
yohan4ws said:
for tethering... check the app store im sure there are free utilities that will allow you to tether ..
If you switch up your rom to JellyBean (as there are no stable FULLY working AOSP roms) you'll be missing some things.. ie: keyboard lights, pictures don't save with proper rotation, bluetooth headset, no ability to use skype ... some roms dont have wifi tethering working...
Rootbox 4.2.2 gives the best battery so far, keyboard lights don't work though...
Check out the "Everything SAmsung Glide" thread under development, read about the roms that are active and it should give you a great start!
Welcome to the community!
Click to expand...
Click to collapse
I find that the keyboard lights patch that ties lights to capacitive buttons does not make a real difference in battery life. I use it and my battery last as long as without it.
sorry to bother again, I haven't find how to update kernel and CWM. I have a xperia pro which I just have to start at fastboot, flash boot.img and then flash rom. how do I update CWM and kernel in a stock 4.0.4? thx!
jzamoras said:
sorry to bother again, I haven't find how to update kernel and CWM. I have a xperia pro which I just have to start at fastboot, flash boot.img and then flash rom. how do I update CWM and kernel in a stock 4.0.4? thx!
Click to expand...
Click to collapse
You flash a kernel that's compatible with your ROM in recovery...that's it.
jevan24 said:
You flash a kernel that's compatible with your ROM in recovery...that's it.
Click to expand...
Click to collapse
still don't get it.. kernel should be flashed at fastboot point (or whatever it is called for samsung devices). CWM recovery is supposed to flash roms... or am I missing something?
jzamoras said:
still don't get it.. kernel should be flashed at fastboot point (or whatever it is called for samsung devices). CWM recovery is supposed to flash roms... or am I missing something?
Click to expand...
Click to collapse
Ummm we flash with recovery here...you can open the zip file and paste the boot.img into manually if you like. That's about it. We don't deal with fastboot or hboot with this phone. Sony phones are a lot different. Like I said, download litekernel and flash with twrp or cwm. its as simple as that...as long as the version of the kernel matches the rom version. There is litkernel ics or for jb. You want litekernel ics. So do some reading then come back and ask questions.
http://forum.xda-developers.com/showthread.php?t=2067896
I read the captivate (not glide) wiki and it's much clear:
http://wiki.cyanogenmod.org/w/Install_CM_for_captivatemtd
step 1 put phone in download mode (like sony's fastboot mode).
step 2 flash custom recovery (which cointains the kernel I guess) using hemdall
step 3 boot into recovery and flash rom and gapps
I read several ppl lost imei info. I tried to backup but looks like requires root. Do I need to root stock, backup imei and then install the custom rom?
thanks!!
jzamoras said:
I read the captivate (not glide) wiki and it's much clear:
http://wiki.cyanogenmod.org/w/Install_CM_for_captivatemtd
step 1 put phone in download mode (like sony's fastboot mode).
step 2 flash custom recovery (which cointains the kernel I guess) using hemdall
step 3 boot into recovery and flash rom and gapps
I read several ppl lost imei info. I tried to backup but looks like requires root. Do I need to root stock, backup imei and then install the custom rom?
thanks!!
Click to expand...
Click to collapse
Id use odin. Much easier. Then flash twrp or cwm. Then go to whatever rom you want flash it and flash kernel. Gapps too if your using a aosp rom. That guide is for captivate not captivate glide... check out this guide for more insight http://forum.xda-developers.com/showthread.php?t=1621350
jevan24 said:
Id use odin. Much easier. Then flash twrp or cwm. Then go to whatever rom you want flash it and flash kernel. Gapps too if your using a aosp rom. That guide is for captivate not captivate glide...
Click to expand...
Click to collapse
at what step should I flash kernel? what about if I just want to use cyanogenmod kernel (boot.img)? do I really need to backup IMEI?
I added more to my post. Check out the link. I think its what you need to read. Its everything about this phone in one thread.
---------- Post added at 10:28 PM ---------- Previous post was at 10:24 PM ----------
You would flash kernel right after rom.
jzamoras said:
at what step should I flash kernel? what about if I just want to use cyanogenmod kernel (boot.img)? do I really need to backup IMEI?
Click to expand...
Click to collapse
odin cwm
flash su
backup
clear cache factory reset
flash rom
flash gapps
flash kernel
clear cache clear cache clear cache
reboot wait for a minute takes a while to get through the boot image the first time
---------- Post added at 03:51 AM ---------- Previous post was at 03:45 AM ----------
og anarchy said:
odin cwm
flash su
backup
clear cache factory reset
flash rom
flash gapps
flash kernel
clear cache clear cache clear cache
reboot wait for a minute takes a while to get through the boot image the first time
Click to expand...
Click to collapse
every rom if you go to its thread to download has the steps listed for how to flash in what order if you take the time to read you will get it
try this thread has link to every tweak trick hack rom kernel or anything that has been usable to me in rooting and roming my glide
http://forum.xda-developers.com/showthread.php?t=1621350
CAPTIVATE GLIDE LIQUID SMOOT LITE KERNEL JB
OVER CLOCKED TO 1400 MHZ ROCKING THE GAMES
og anarchy said:
odin cwm
flash su
backup
clear cache factory reset
flash rom
flash gapps
flash kernel
clear cache clear cache clear cache
reboot wait for a minute takes a while to get through the boot image the first time
---------- Post added at 03:51 AM ---------- Previous post was at 03:45 AM ----------
every rom if you go to its thread to download has the steps listed for how to flash in what order if you take the time to read you will get it
try this thread has link to every tweak trick hack rom kernel or anything that has been usable to me in rooting and roming my glide
http://forum.xda-developers.com/showthread.php?t=1621350
CAPTIVATE GLIDE LIQUID SMOOT LITE KERNEL JB
OVER CLOCKED TO 1400 MHZ ROCKING THE GAMES
Click to expand...
Click to collapse
Hi, first three steps are done. I'm still looking for the best rom to daily use. About the step "flash kernel", do I have to flash litekernel ICS or JB depending the rom version of course, however, what about if I just want to use cyanogenmod provided kernel inside the zip? just I have to skip that step? what kernel do you recommend if I want to use cyanogenmod?
thanks for all the help guys, you have made me the job much easier!!
I've got a Virgin Mobile Samsung S II.
I followed this guide to root my phone on my macbook. Following it exactly gave me this error message in terminal: ERROR: Partition "kernel" does not exist in the specified PIT.
After thorough reading of the old root guide thread, I thought it was a case sensitivity issue since I was using a newer version of Heimdall. In terminal, I entered: heimdall flash --KERNEL zImage to start the process rather than all lowercase "kernel."
Now my phone won't boot beyond the startup screen that says "Samsung GALAXY S II" with a yellow error triangle. Can anyone please help? I know very little about these things, so the simpler the answers, the better -- any and all would be greatly appreciated.
If it's helpful, here is what the terminal screen displayed:
xxxxx-xxxx-macbook-pro-2ownloads ACraig426$ cd /Users/ACraig426/Downloads
xxxxx-xxxx-macbook-pro-2ownloads ACraig426$ tar xvf SPH-D710_Zedomax_EpicTouchKernel-v3.tar
x zImage
xxxxx-xxxx-macbook-pro-2ownloads ACraig426$ ls -l
total 32512
[email protected] 1 ACraig426 staff 8325120 Sep 3 20:29 SPH-D710_Zedomax_EpicTouchKernel-v3.tar
[email protected] 1 ACraig426 staff 8315836 Sep 22 2011 zImage
andrew-craigs-macbook-pro-2ownloads ACraig426$ heimdall flash --KERNEL zImage
Heimdall v1.4.0
Copyright (c) 2010-2013, Benjamin Dobell, Glass Echidna
http://www.glassechidna.com.au/
This software is provided free of charge. Copying and redistribution is
encouraged.
If you appreciate this software and you would like to support future
development please consider donating:
http://www.glassechidna.com.au/donate/
Initialising connection...
Detecting device...
Claiming interface...
Setting up interface...
Initialising protocol...
Protocol initialisation successful.
Beginning session...
Some devices may take up to 2 minutes to respond.
Please be patient!
Session begun.
Downloading device's PIT file...
PIT file download successful.
Uploading KERNEL
100%
KERNEL upload successful
Ending session...
Rebooting device...
Releasing device interface...
I can go into CWM Recovery or download mode, if that helps.
@monsieurblue ......can you boot to recovery/did you put a recovery on the device.. if you did and can get there, try to wipe cache and dalvik cache and reboot.. if that doesn't work.. I would try flashing a rom.. maybe you wiped it off when in heimdall.. Just my thoughts..
noearso the
Gil81 said:
@monsieurblue ......can you boot to recovery/did you put a recovery on the device.. if you did and can get there, try to wipe cache and dalvik cache and reboot.. if that doesn't work.. I would try flashing a rom.. maybe you wiped it off when in heimdall.. Just my thoughts..
Click to expand...
Click to collapse
I can boot to ClockWork Mod Recovery. Which I believe means that something took, because that's not something that would be on the phone otherwise, right? I tried using it to wipe the cache and dalavik cache, but it didn't work.
I'm sorry if this is a dumb question, but how can I flash a ROM? If I can only load the download and CWM screens, is there still a way to get a ROM onto the phone to flash it?
Thanks for the reply!
@monsieurblue .. might be that kernel you flashed isn't compatible with the rom you're running. Try a different kernel that you now is compatible.
Gil81 said:
@monsieurblue .. might be that kernel you flashed isn't compatible with the rom you're running. Try a different kernel that you now is compatible.
Click to expand...
Click to collapse
OK. Maybe the problem is that I'm not running a ROM right now? I was on the stock 4.1 that came on the phone when I bought it before this process. Now that I'm done this kernel thing, do I need to flash a ROM before the phone will boot up?
I can mount the phone with CWM to add/remove files from my computer. Can I add a .zip of a rom to install that way?
monsieurblue said:
I can boot to ClockWork Mod Recovery. Which I believe means that something took, because that's not something that would be on the phone otherwise, right? I tried using it to wipe the cache and dalavik cache, but it didn't work.
I'm sorry if this is a dumb question, but how can I flash a ROM? If I can only load the download and CWM screens, is there still a way to get a ROM onto the phone to flash it?
Thanks for the reply!
Click to expand...
Click to collapse
Because you now have a custom recovery ( I think ) you can use adb or something to get a rom on the phone.. I'm not sure as I've never looked into it, but I will.. hang tight. Also I think you can use heimdall to flash a rom.. right.
---------- Post added at 08:56 PM ---------- Previous post was at 08:49 PM ----------
monsieurblue said:
OK. Maybe the problem is that I'm not running a ROM right now? I was on the stock 4.1 that came on the phone when I bought it before this process. Now that I'm done this kernel thing, do I need to flash a ROM before the phone will boot up?
I can mount the phone with CWM to add/remove files from my computer. Can I add a .zip of a rom to install that way?
Click to expand...
Click to collapse
Yep.. that's what I thought.. just make sure you flash the rom correctly. A lot of the roms require you to flash from el26 or el29 direct boot kernel's. Since you can't boot, el29 is out. But you can put the rom of choice and gapps and el26 kernel on sdcard. Then wipe data, cache, dalvik. Then flash el26.after the flash go to advanced and pick reboot recovery. This will boot you back to recovery but the el26 recovery. Then flash rom.. then flash gapps.. you might want to wipe data, cache, dalvik again to be sure. You can also go to mount and format system.. only system... this will ensure a super clean flash..
Gil81 said:
Yep.. that's what I thought.. just make sure you flash the rom correctly. A lot of the roms require you to flash from el26 or el29 direct boot kernel's. Since you can't boot, el29 is out. But you can put the rom of choice and gapps and el26 kernel on sdcard. Then wipe data, cache, dalvik. Then flash el26.after the flash go to advanced and pick reboot recovery. This will boot you back to recovery but the el26 recovery. Then flash rom.. then flash gapps.. you might want to wipe data, cache, dalvik again to be sure. You can also go to mount and format system.. only system... this will ensure a super clean flash..
Click to expand...
Click to collapse
This is incredibly helpful; thank you so much.
I'm sorry for the ignorance, but can you explain to me what el26 is, and what ROM I should flash? When I started this process, I wanted to install this one, but there are warnings saying not to install on a Jelly Bean Modem and I don't know what else to use or how to install on a different modem.
And just to make sure I understand, when you say "flash" el26, that means it's a .zip that will be on my sdcard, which I install by using the "install zip from sdcard" option on CWM, right?
Thanks again!
monsieurblue said:
This is incredibly helpful; thank you so much.
I'm sorry for the ignorance, but can you explain to me what el26 is, and what ROM I should flash? When I started this process, I wanted to install this one, but there are warnings saying not to install on a Jelly Bean Modem and I don't know what else to use or how to install on a different modem.
And just to make sure I understand, when you say "flash" el26, that means it's a .zip that will be on my sdcard, which I install by using the "install zip from sdcard" option on CWM, right?
Thanks again!
Click to expand...
Click to collapse
Give me about ten minutes and I'll hunt down some links for you and give ya a little guide..
---------- Post added at 09:39 PM ---------- Previous post was at 09:06 PM ----------
monsieurblue said:
This is incredibly helpful; thank you so much.
I'm sorry for the ignorance, but can you explain to me what el26 is, and what ROM I should flash? When I started this process, I wanted to install this one, but there are warnings saying not to install on a Jelly Bean Modem and I don't know what else to use or how to install on a different modem.
And just to make sure I understand, when you say "flash" el26, that means it's a .zip that will be on my sdcard, which I install by using the "install zip from sdcard" option on CWM, right?
Thanks again!
Click to expand...
Click to collapse
Ok.. I can't find a zip file for el26 or el29..you can go about this by getting one of these recoveries. They are in rwilco's repo..el26 is at the top of the page.. don't get a stock one.. lol. As it will have stock recovery. Get the. Tar version of the file and use heimdall to flash it and then proceed with flashing rom, gapps.. but I don't know how heimdall works, I'm a windows man. Or you could flash a rom with heimdall.. Or yet another way is to try to flash the rom from that recovery you have.. I'm not sure about it.. if I was you I would download the tar el26 kernel and a JB rom based on touchwiz from Android development thread and the gapps.. put the rom and gapps on sdcard. Then figure out a way to flash the tar el26 with heimdall..
Yes.. flash means install... and the modem thing is because CM/AOSP/AOKP roms need an ICS modem to get data working. That why I suggested the JB touchwiz rom.. it will work with the modem you have. I'm assuming it's gb27modem(jb modem)..
---------- Post added at 09:50 PM ---------- Previous post was at 09:39 PM ----------
Ok... I'm an idiot.. lol. I found the zip for el26 kernel.. http://forum.xda-developers.com/showthread.php?t=1662295 ..scroll down the page to GB touch wiz kernel.. find chris41g stock cwm5 repacked kernel and download the el26 zip one..
Gil81 said:
Give me about ten minutes and I'll hunt down some links for you and give ya a little guide..
---------- Post added at 09:39 PM ---------- Previous post was at 09:06 PM ----------
Ok.. I can't find a zip file for el26 or el29..you can go about this by getting one of these recoveries. They are in rwilco's repo..el26 is at the top of the page.. don't get a stock one.. lol. As it will have stock recovery. Get the. Tar version of the file and use heimdall to flash it and then proceed with flashing rom, gapps.. but I don't know how heimdall works, I'm a windows man. Or you could flash a rom with heimdall.. Or yet another way is to try to flash the rom from that recovery you have.. I'm not sure about it.. if I was you I would download the tar el26 kernel and a JB rom based on touchwiz from Android development thread and the gapps.. put the rom and gapps on sdcard. Then figure out a way to flash the tar el26 with heimdall..
Yes.. flash means install... and the modem thing is because CM/AOSP/AOKP roms need an ICS modem to get data working. That why I suggested the JB touchwiz rom.. it will work with the modem you have. I'm assuming it's gb27modem(jb modem)..
---------- Post added at 09:50 PM ---------- Previous post was at 09:39 PM ----------
Ok... I'm an idiot.. lol. I found the zip for el26 kernel.. http://forum.xda-developers.com/showthread.php?t=1662295 ..scroll down the page to GB touch wiz kernel.. find chris41g stock cwm5 repacked kernel and download the el26 zip one..
Click to expand...
Click to collapse
Cool! So I download the el26 .zip and put that onto my sdcard, then flashed it. Now, what ROM and Gapps should I put on there as well before following the rest of your plan and booting the whole thing up? My intention was to install something with Jelly Bean 4.2.2, but now that I'm all turned around, I'm not sure what the best ROM for that is.
@monsieurblue ..
After you have the kernel on you sdcard(not in a folder). And you have the rom/gapps you want.... wipe cache and dalvik cache(under advanced). Then click install from sdcard. Pick install from internel.. just thought you might have been able to put it on ext.sdcard.Anyway,go to el26 zip file and install. After install is done. Go to advanced and pick reboot recovery and phone will boot to the el26 recovery(you might have to push volume up.. volume down.. volume up) to get you're power button to work as the select button. It's like that on el29..
Now wipe data, cache, dalvik.. then flash rom. After it's done flash the gapps the rom op thread suggested. If all goes well after this.. you can reboot..
I think this will get ya home.. Let me know.
---------- Post added at 10:05 PM ---------- Previous post was at 10:04 PM ----------
monsieurblue said:
Cool! So I download the el26 .zip and put that onto my sdcard, then flashed it. Now, what ROM and Gapps should I put on there as well before following the rest of your plan and booting the whole thing up? My intention was to install something with Jelly Bean 4.2.2, but now that I'm all turned around, I'm not sure what the best ROM for that is.
Click to expand...
Click to collapse
Sorry I'm so slow posting.. I'm on my tab pulling 4g from my epic.. lol
---------- Post added at 10:07 PM ---------- Previous post was at 10:05 PM ----------
I like project X or paradoX...both great roms...
Gil81 said:
@monsieurblue ..
After you have the kernel on you sdcard(not in a folder). And you have the rom/gapps you want.... wipe cache and dalvik cache(under advanced). Then click install from sdcard. Pick install from internel.. just thought you might have been able to put it on ext.sdcard.Anyway,go to el26 zip file and install. After install is done. Go to advanced and pick reboot recovery and phone will boot to the el26 recovery(you might have to push volume up.. volume down.. volume up) to get you're power button to work as the select button. It's like that on el29..
Now wipe data, cache, dalvik.. then flash rom. After it's done flash the gapps the rom op thread suggested. If all goes well after this.. you can reboot..
I think this will get ya home.. Let me know.
---------- Post added at 10:05 PM ---------- Previous post was at 10:04 PM ----------
Sorry I'm so slow posting.. I'm on my tab pulling 4g from my epic.. lol
---------- Post added at 10:07 PM ---------- Previous post was at 10:05 PM ----------
I like project X or paradoX...both great roms...
Click to expand...
Click to collapse
Ha, it's no problem! I'm just glad for the help. I think I've got the hang of what to do once I've got the ROM/Gapps picked out, I just don't know which one to pick out. Which do you mean when you say the ones OP thread suggested? The "Liquid Smooth" one I linked to in my thread starter is what I want, but since I haven't changed my modem, I think it will harm the phone (it says in the instructions not to install on a Jelly Bean modem, which is what I believe I have right now).
Just saw your recommendation for project X and paradoX -- I'll check them out now, thanks!
If you dead set on 4.2.2...I love slimbean4.2...4.3 has no 4g. Also you will need slimgapps for slimbean as it boots at 182 dpi for the screen size. You can also use the lz kernel in the slimbean thread.. But I would stick to touchwiz until you get you're feet wet,, lol..Because flashing slim or other cm/aosp/aokp roms will require the ICS modem flash and then a temp boot flash to update you prl and profile.. You can boot a tw rom tonight then tomorrow get mobile Odin and flash an ICS modem(FL24 is the newest)then update prl and profile. After this you could use el29 direct boot kernel to flash any cm/aosp/aokp rom you want.. and have data.. wheww.. lol. Let me know if you need a guide for mobile Odin. I wrote a little one up here in q and a.. awhile back.
---------- Post added at 10:26 PM ---------- Previous post was at 10:19 PM ----------
monsieurblue said:
Ha, it's no problem! I'm just glad for the help. I think I've got the hang of what to do once I've got the ROM/Gapps picked out, I just don't know which one to pick out. Which do you mean when you say the ones OP thread suggested? The "Liquid Smooth" one I linked to in my thread starter is what I want, but since I haven't changed my modem, I think it will harm the phone (it says in the instructions not to install on a Jelly Bean modem, which is what I believe I have right now).
Just saw your recommendation for project X and paradoX -- I'll check them out now, thanks!
Click to expand...
Click to collapse
That's cool.. flash it tomorrow. After we get ya back up.. and about the op.. sometimes rom Devs will suggest you flash a certain gapps pkg.
FYI.. it won't hurt you're phone.. you just won't have data.. also you know you will have to change you're APN settings to get mms working.. unless you're on sprint.. I'm a boost boy.
You could flash the one you want. Then get an ICS modem and flash it in recovery.. wipe cache/dalvik..flash modem.. reboot. But you're signal might be buggy without the prl update.. and you can't update prl's from cm/aosp/aokp roms.. as of yet..
---------- Post added at 10:33 PM ---------- Previous post was at 10:26 PM ----------
Just so you know.. I gave you you're first thanks..it's the thanks button on the bottom of post.. you can use it 8 times a day.. I know it sounds childish.. but we live for that thanks button on xda..lol
---------- Post added at 10:40 PM ---------- Previous post was at 10:33 PM ----------
[/COLOR @monsieurblue ..I just thought of this.. I've read where sometimes you have to flash an ICS one-click first.. if you're going from JB to AOSP roms.. or it won't boot past splash screen.. I haven't had this issue.. but it's out there.. just a heads up.
---------- Post added at 10:49 PM ---------- Previous post was at 10:40 PM ----------
If you decide to flash another rom..This is a fool proof way to flash.. almost.. lol. Just remember that mobile Odin will NOT flash modem's.. The post you want is post 5..
http://forum.xda-developers.com/showthread.php?t=2418320
---------- Post added at 10:53 PM ---------- Previous post was at 10:49 PM ----------
I posted a link I think you should read through.. seen you already seen the post before I added. So I'm sending this.. it's the link above
@monsieurblue
This is incredible, it worked! Thank you so much!
My concern now is getting to a ROM that I like -- this Project X one is good as a temporary measure, but I really want something that's 4.2.2 and highly customizable (and, most importantly, able to be installed from a mac).
@Gil81
Last question, I promise! To install Slimbean 4.2, which you recommended, it looks like I can follow this guide. Only problem is the Odin One-Click ICS Root: I can't follow those instructions because they're exclusive to Windows and I'm on a Mac. Any idea on how to install Slimbean 4.2 onto my device from where I am now? And do I need to change the modem, like you mentioned earlier?
monsieurblue said:
@Gil81
Last question, I promise! To install Slimbean 4.2, which you recommended, it looks like I can follow this guide. Only problem is the Odin One-Click ICS Root: I can't follow those instructions because they're exclusive to Windows and I'm on a Mac. Any idea on how to install Slimbean 4.2 onto my device from where I am now? And do I need to change the modem, like you mentioned earlier?
Click to expand...
Click to collapse
alright...youre back up...good job man...:good:
ALWAYS...I MEAN...ALWAYS FOLLOW THE INSTALL DIRECTIONS IN THE ROM'S THREAD...:fingers-crossed:..
That being said..now that youre up and running follow the guide i linked to in the above post...its a mobile odin guide for flashing roms on our phone..it will work will almost all roms. it is how i have flashed every rom but a couple one-clicks..
BUT BEFORE YOU GO TO THAT LINK....download fl24 or another ics modem and flash it in recovery on the rom you have now..after the flash and you reboot back to the rom..update the prl and profile. just remember after you do this you wont have data....but it is the right modem for slimbean or the rom you really wanted..FYI..the mobile odin guide will work for that rom you first wanted...just follow the links in it and the directions to the letter...it is a proven way to flash...
Dont worry about the ics one-click...i never have any problems..if you do. you can always go back and just completely wipe youre phone and sdcard. then use heimdall to flash the rom.. the one click just clean slates youre phone and changes the partitions...i believe heimdall would do the same if you where to use it to flash..but i think youll be fine..
@Gil81
Awesome, I'm going to follow this exactly later tonight! Thanks again for all of the help!
In the guide you linked to, you say:
First...you will need to get all the needed files( ROM, Gapps( for the rom you pick ),EL29 direct boot kernel. http://forum.xda-developers.com/show....php?t=1662295 ..this is the link to rwilcos repo..scroll down to gb-touch wiz based kernels. Then look for EL 29 direct boot/tar.. You will need the tar.md5 format. Place this tar and the ROM and Gapps on the root of you're internal sdcard( not in a folder ).
Click to expand...
Click to collapse
Would I be using the JB Touch-Wiz Based Kernel or the GB Touch-Wiz Based Kernel if I'm using a Slimbean 4.2.2 ROM?
monsieurblue said:
@Gil81
Awesome, I'm going to follow this exactly later tonight! Thanks again for all of the help!
In the guide you linked to, you say:
Would I be using the JB Touch-Wiz Based Kernel or the GB Touch-Wiz Based Kernel if I'm using a Slimbean 4.2.2 ROM?
Click to expand...
Click to collapse
when you follow thw link...it will take you to rwilco's repo.. Scroll down the page (almost to the bottom of the kernel listings)and you will see a link for the el29 direct boot kernel..get the tar version because you will be using mobile odin..The el29 direct boot kernel is a safe gingerbread kernel we use to flash roms(it will not boot up on the rom youre flashing)..
you see..we just use that kernel and recovery to flash...once you flash the rom it will install the kernel made to run with that rom. Our recovery is funny on this phone...it is part of the kernel,thats why we use that kernel to flash..it is safe and has a safe recovery..
I just prefer el29 direct boot ( instead of el26 ) because when you flash it with mobile odin it will boot straight to recovery for you...no pulling the battery and then putting it back in and holding power button and volume up to get to recovery..:laugh:..
remember to get the slim gapps for 4.2...and after you get slim bean booted up and let it settle in for a few hours...you can flash the lighning kernel for slimbean linked in the slimbean thread...to flash it you just boot to recovery...wipe cache and dalvik and install it..then reboot..:good:...it is really the only tweak i run with slimbean..great battery life..
if you need any help...dont hesitate to ask...thats what xda is all about...Good Luck.
---------- Post added at 02:17 PM ---------- Previous post was at 01:53 PM ----------
Here is the link to the lz kernel... http://forum.xda-developers.com/showthread.php?t=2270358 ...
Just scroll down until you see ( smdk 4412 p_4 zip ) Thats the one you want...
FYI...some people reported a boot loop on this kernel if you wiped cache or dalvik...I never had the issue, but its out there...
I also seen a new kernel thread in the original development thread...blasphamy kernel..i think.. You could also try it..Just remember to make a backup before going flashy crazy..so if things go side ways,you can get back to where you sarted...
@Gil81
I've hit a roadblock! I was following this list I made based on your instructions:
MODEM
1. Add FL24.zip to sdcard and flash in recovery.
2. Reboot.
3. Update the PRL and profile.
ROM
1. Place ROM, Gapps, and EL29 boot kernel on the sdcard.
2. Open mobile odin > kernel > internal sdcard > EL29 direct boot kernel > flash firmware > check md5 > flash
3. Once in recovery, push volume up, volume down, volume up (this will make the power button the enter button)
4. Wipe data
5. Wipe cache
6. Wipe dalvik cache
7. Mounts/storage > format system (only system)
8. Install from internal sdcard > ROM zip file
9. Install from internal sdcard > Gapps
10. Reboot
I finished step 2 on ROM, then the system restarted and the phone didn't boot past the "Samsung GALAXY SII" screen. When I hold the power and volume up buttons to get into recovery, it goes into a recovery screen that says "Android system recover <3e>" at the top. I have four options:
reboot system now
apply update from sdcard
wipe data/factory reset
wipe cache partition
I wiped the data and cache based on your instructions, but there's no option to wipe the davlik cache, and when I go to "apply update from sdcard" it says: E:failed to mount /sdcard (No such file or directory)
Help!
monsieurblue said:
@Gil81
I've hit a roadblock! I was following this list I made based on your instructions:
MODEM
1. Add FL24.zip to sdcard and flash in recovery.
2. Reboot.
3. Update the PRL and profile.
ROM
1. Place ROM, Gapps, and EL29 boot kernel on the sdcard.
2. Open mobile odin > kernel > internal sdcard > EL29 direct boot kernel > flash firmware > check md5 > flash
3. Once in recovery, push volume up, volume down, volume up (this will make the power button the enter button)
4. Wipe data
5. Wipe cache
6. Wipe dalvik cache
7. Mounts/storage > format system (only system)
8. Install from internal sdcard > ROM zip file
9. Install from internal sdcard > Gapps
10. Reboot
I finished step 2 on ROM, then the system restarted and the phone didn't boot past the "Samsung GALAXY SII" screen. When I hold the power and volume up buttons to get into recovery, it goes into a recovery screen that says "Android system recover <3e>" at the top. I have four options:
reboot system now
apply update from sdcard
wipe data/factory reset
wipe cache partition
I wiped the data and cache based on your instructions, but there's no option to wipe the davlik cache, and when I go to "apply update from sdcard" it says: E:failed to mount /sdcard (No such file or directory)
Help!
Click to expand...
Click to collapse
That's because you got the el29 kernel...not the el29 direct boot kernel....you just flashed a stock kernel that will not boot with anything but a gingerbread rom...
i think i warned you about that...now you will need to heimdall a recovery back on to the phone...