Related
Hi, if you can help me unbrick my phone I'll buy you a beer (or three!)
I have an htc one x which i managed to unlock the bootloader via htcdev as in various tutorials....
I was too lazy to take a backup
I then tried to install cyanogenmod 10 using cwm recovery.... (by flashing a zip file i had downloaded - one of the nightly builds)
I wiped the cache etc in cwm
it got stuck in a boot loop i think as it got to the spinning cyanogen logo then nothing happened...
I've tried to get it working again using lots of different methods - i downloaded some RUU exes which failed because they said they weren't the correct ROM (even though they should be right) - then i read a tutorial about how to use fastboot to flash system.img onto the phone but it fails giving error code 00000006
I can't push any zip files to the phone using ADB as I get permission denied errors
I've also tried to use fastboot to flash various recoveries but I can't apply any zips because I can't get them onto the phone in the first place
I've also flashed various recovery.img files but when they load, I get a red triangle after a few seconds
If someone could tell me how to use ADB to push a zip file to the phone I'd be really grateful - have tried everything but keep getting permission denied errors
Thanks
(oh and if you manage to help me fix it I WILL buy you a beer... or 3)
oh and ....
ALSO I've googled the problem and tried all of the options I can find which could help - please don't just send me a link to a page because i can guarantee I've probably already tried the solution and failed. When I boot into recovery, I can't use adb push to send files to the phone because it says it's not connected even if i try the option for mount data, or mount storage - the only time windows seems to manage to aknowledge it's existence is on the fastboot screen -
lazclark said:
Hi, if you can help me unbrick my phone I'll buy you a beer (or three!)
I have an htc one x which i managed to unlock the bootloader via htcdev as in various tutorials....
I was too lazy to take a backup
I then tried to install cyanogenmod 10 using cwm recovery.... (by flashing a zip file i had downloaded - one of the nightly builds)
I wiped the cache etc in cwm
it got stuck in a boot loop i think as it got to the spinning cyanogen logo then nothing happened...
I've tried to get it working again using lots of different methods - i downloaded some RUU exes which failed because they said they weren't the correct ROM (even though they should be right) - then i read a tutorial about how to use fastboot to flash system.img onto the phone but it fails giving error code 00000006
I can't push any zip files to the phone using ADB as I get permission denied errors
I've also tried to use fastboot to flash various recoveries but I can't apply any zips because I can't get them onto the phone in the first place
I've also flashed various recovery.img files but when they load, I get a red triangle after a few seconds
If someone could tell me how to use ADB to push a zip file to the phone I'd be really grateful - have tried everything but keep getting permission denied errors
Thanks
(oh and if you manage to help me fix it I WILL buy you a beer... or 3)
Click to expand...
Click to collapse
Have you flashed the cm boot IMG and then erased fastboot cache?
fastboot flash boot pathtoboot.IMG
fastboot erase cache
For the RUU to work you need to have stock recovery and a relocked boot loader.
if you download the latest clockworkmod mounting as USB storage is fixed.
Sent from my HTC One X using xda app-developers app
thanks!
wow that was a quick reply - yes I've flashed the cm boot img and erased the cache - which version of CWM is the latest? - When you say mounting as USB storage is fixed, do you mean that windows will be able to see the device and write files to it?
(I'm really sorry for asking these questions - the problem is that I know a BIT about how android works but not as much as I should do)
treebill said:
Have you flashed the cm boot IMG and then erased fastboot cache?
fastboot flash boot pathtoboot.IMG
fastboot erase cache
For the RUU to work you need to have stock recovery and a relocked boot loader.
if you download the latest clockworkmod mounting as USB storage is fixed.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Are you absolutely sure you flashed the boot.img from the rom.zip using fastboot on your computer? Because it really sounds like you didn't
This is a thread I made and it should provide you with a solution if not a starting point if you insist on CM10.
http://forum.xda-developers.com/showthread.php?t=1900127
Good luck!
sorry hope i'm not wasting your time!
I ran the command as follows :-
fastboot flash boot boot_signed.img
(I got the img file from the ruu )
I'm not 100% sure if it worked, but at that stage I didn't see any errors
Michealtbh said:
Are you absolutely sure you flashed the boot.img from the rom.zip using fastboot on your computer? Because it really sounds like you didn't
Click to expand...
Click to collapse
CWM 5.8.4.0 has the USB mounting fixed. You can go to mounts and storage and mount as USB, then the PC will see it.
fastboot flash recovery recovery.img
Wipe cache and dalvik cache.
I'm pretty sure you either didn't flash the boot.img or flashed the wrong one, so get it again to make sure it's the right one and
fastboot flash boot boot.img
And
fastboot erase cache
thanks!
I'll give it a go - to be honest i don't insist on using cm10 at all - i just wanted to see what jellbean was like and it seemed like a reasonable way of achieving that.... i'd be quite happy with any decent rom if it can fix the lag problems i have and some of the other issues.....
great tutorial by the way! - once my phone has charged up again I'll try it
ORStoner said:
This is a thread I made and it should provide you with a solution if not a starting point if you insist on CM10.
http://forum.xda-developers.com/showthread.php?t=1900127
Good luck!
Click to expand...
Click to collapse
ahhhh!
i think i was trying to run CWM 5.8.2.7 which possibly didn't have usb mounting working? Will give that a shot thanks!
BenPope said:
CWM 5.8.4.0 has the USB mounting fixed. You can go to mounts and storage and mount as USB, then the PC will see it.
fastboot flash recovery recovery.img
Wipe cache and dalvik cache.
I'm pretty sure you either didn't flash the boot.img or flashed the wrong one, so get it again to make sure it's the right one and
fastboot flash boot boot.img
And
fastboot erase cache
Click to expand...
Click to collapse
Thanks.
I use CM10 myself at the moment because of the aesthetics, but because of the amount of ram and battery it uses I wish I had stuck with ARHD.
Come October we should see Jellybean ARHD which will have great features like USB OTG without a powered hub.
lazclark said:
i think i was trying to run CWM 5.8.2.7 which possibly didn't have usb mounting working? Will give that a shot thanks!
Click to expand...
Click to collapse
Mount as USB not working on that version, also charging not working either. It was not a great release in terms.of features, but it was updated quickly, that's quite an.old version now.
Do you know which tutorial you followed? It really needs updating, there are a lot of people on this old version struggling more than they need to.
Right, first you're going to flash a recovery which allows you to mount USB storage. Either cwm or TWRP, download the recovery.img and flash through fastboot using fastboot flash recovery rocoveryname.img.
Download a new rom and extract the boot.img from it. Flash that boot.img using the usual fastboot method.
Now boot into the new recovery, connect to your pc and mount USB storage from the option in recovery. Copy over the rom you downloaded. Unmount USB storage. Now do a full wipe through the menu in recovery - format /data, /system and /cache. Now flash the rom and reboot
So I just rooted my phone and tried to install new room cyanogenmod 10 in recovery mode .. after the installation was complete, a simple reboot and after about 10s I could see word cyanogenmod on the screen .. I though it would boot up after a couple of minutes but after 15 mins, still no response .. so i went back into recovery mode and did a factory reset, delete cache and restored the original ROM .. Once again a reboot and it left me with the same booting screen written "cyanogenmod" and nothing else .. I did it once more but no use .. It always gets stuck on the same freaking screen .. Really need help guys ..
whats your hboot ? Did you wipe cache after flashing the boot.img ?
If your hboot is on 1.3x you need a modified hboot for CM10
http://db.tt/uDdWaAtH
And if you want to restore a nandroid you also have to flash the boot.img that is located in the nandroid backup folder
yes did went into the nandroid backup folder and restored it from there .. i had other CleanROM 5.1 zip in the phone memory ..i did a complete reset n tried to install CleanROM 5.1 .. thought may b that could get me out of the loop .. bt didnt help .. doest matter i do nandroid back r unzip clean rom or even cyanogen 10 .. it gets caught up in the same loop hole .. and what is hboot .. ?
You have to flash the boot.img file with fastboot commands from the pc to the phone in the bootloader menu, did you did it like that or did you try to flash it with the recovery ?
no i did it just in the recovery mode .. not from my pc .. do i have to do it from pc .. ? if yes then how.. ?
Do you have fastboot files on the pc ?
---------- Post added at 09:58 AM ---------- Previous post was at 09:55 AM ----------
Check the 9th post from this thread, links to the HTC driver and fastboot files are there. Just follow my post and if you are ready we can go on
http://forum.xda-developers.com/showthread.php?t=2111703
I am sorry but I am a newbie and don't know what an hboot is .. could you tell me what it is .. ? and yes i did wiped the cash when i got stuck in the loophole .. bt it didnt do any good ..
The hboot is like the basic bios of the phone ....
And yes you need a pc to flash the boot.img
Check that post its very clear. Just that one post !!!
And we all where noobs .... i was a űbernoob
Mr Hofs said:
The hboot is like the basic bios of the phone ....
And yes you need a pc to flash the boot.img
Check that post its very clear. Just that one post !!!
And we all where noobs .... i was a űbernoob
Click to expand...
Click to collapse
ok i followed all the steps u told me to .. after entering the three commands on the pc, which were successful, what next .. ? i mean just did those commands on the pc and i have left the cellphone idle i.e still "FASTBOOT USB" .. should i exit it or do a factory wipe and backup .. ?
hassamrehmat said:
ok i followed all the steps u told me to .. after entering the three commands on the pc, which were successful, what next .. ? i mean just did those commands on the pc and i have left the cellphone idle i.e still "FASTBOOT USB" .. should i exit it or do a factory wipe and backup .. ?
Click to expand...
Click to collapse
Go back into recovery and do a full wipe and install the rom. Then reboot and leave it for about 5 minutes
The way to flash a rom is :
Copy the rom.zip to the phones sdcard, open the rom.zip and copy the boot.img file into the fastboot folder on the pc, keep the phone in fastboot usb mode and flash the boot.img
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Then you enter the custom recovery and do a full wipe, after that you flash the rom from inside the recovery
how can i copy the files to one x memory .. it doesnt boot up i.e the pc doesnt show a removable device with storage .. and did the steps u told me to follow n did a factory reset after that .. bt i cant restore bcz the nandroid backup from my cell is removed now .. however i do have it on my pc ..can i install it from there .. ?
hassamrehmat said:
how can i copy the files to one x memory .. it doesnt boot up i.e the pc doesnt show a removable device with storage .. and did the steps u told me to follow n did a factory reset after that .. bt i cant restore bcz the nandroid backup from my cell is removed now .. however i do have it on my pc ..can i install it from there .. ?
Click to expand...
Click to collapse
You can mount the one x as an sdcard inside the recovery, mounts & storage and then the last option at the bottom. Mount as usb disk
Then you can copy the nandroid backup back to the phone and the boot.img to the fastboot folder on the pc. Flash the boot.img, full wipe and restore the nandroid !
Ps what recovery do you have ( also the version number)
Mr Hofs said:
You can mount the one x as an sdcard inside the recovery, mounts & storage and then the last option at the bottom. Mount as usb disk
Then you can copy the nandroid backup back to the phone and the boot.img to the fastboot folder on the pc. Flash the boot.img, full wipe and restore the nandroid !
Ps what recovery do you have ( also the version number)
Click to expand...
Click to collapse
i had jelly bean 4.1.1 firmware 3.14 on my one x .. i rooted it yesterday following onexroot.com which was a success .. then redmondpie mentioned to do a nandroid backup, which i did and also saved files on pc .. then today i tried to flash new rom i.e cyanogenmod and i m stuck ever since .. also the mobile doesnt charge in bootloader mode ..
hassamrehmat said:
i had jelly bean 4.1.1 firmware 3.14 on my one x .. i rooted it yesterday following onexroot.com which was a success .. then redmondpie mentioned to do a nandroid backup, which i did and also saved files on pc .. then today i tried to flash new rom i.e cyanogenmod and i m stuck ever since .. also the mobile doesnt charge in bootloader mode ..
Click to expand...
Click to collapse
What recovery do you have, the phone should charge inside the recovery. Tell me the version you have ?
Hboot-1.33.0000
radio5.1204.162.29
hassamrehmat said:
Hboot-1.33.0000
radio5.1204.162.29
Click to expand...
Click to collapse
I mean the recovery, not the hboot. Enter the recovery and check what version it is
clockworkmod recovery v5.8.1.8
i own an htc one x (international version ) (Tegra 3 ) ..and after reading some interesting articles about installing custom roms on the one x , i rooted it and put some rom , it was working perfectly , but i was not satisfied with the rom , so i downloaded a new rom and put it on the phone and installed the rom (some nexus rom) ... i booted the phone and it was stuck on the nexus logo and nothing else would happen , so i read some articles on the internet , one of them told me to reset the phone to factory setting , after doing that i've lost CWM Recovery , now all i can do is, get to Hboot or something like that , aND all i can see here is fastboot and recovery , I've tried everything , but it just wont work , i'm a noob , please help me fix my phone up ! , i gave it to the htc repair centre they told me that they had to change the motherboard and that would cost as much as half the price of the phone , so i told dont want .... now is there anyway i can fix it by myself or fix it somewhere else for cheaper ??? please suggest a way i can do it on my own
When your phone does not boot anymore, but you still have access to HBOOT, you put the phone in HBOOT and connect it to your Desktop/Laptop and run the RUU so it fresh installs your phone. Let's say the USB connection does not work (Had this issue in the past with my HTC DesireHD)... What now?? Just like the old days, flash rom through SD-Card.
You need
USB Y-Cable
Cardreader
SD-Card
HTC One X (Fastboot disabled and powered off)
Latest ROM RUU.
*This only works with current stock ROM or newer version. Downgrading will fail till we have SuperCID. More about that in here!
1. Run the RUU and get the rom.zip from it. (Find it in here "c:\users\%usrename%\appdata\temp\"
2. Copy rom.zip to the SD-Card and rename it to PJ46IMG.zip
3. Put the SD-Card in the card reader.
4. Put the card reader onto the USB Y-Cable.
5. Plugin the USB Y-Cable to your One X.
6. Hold volume down and press the power button while keeping the volume down pressed. This will get you into HBOOT.
7. Wait a couple of seconds and you'll see that it finds PJ46IMG.zip
8. Follow the instructions on your screen =)
I've tried it with a USB OTG Cable and it worked. Some card readers do ask for more power, than you need a USB Y-Cable.
Questions etc. please here and not in PM!
Sent from my HTC One X using xda app-developers app
---------- Post added at 05:19 PM ---------- Previous post was at 05:18 PM ----------
I found it in xda i just copy paste it.all credit goes to that person not to me...
Sent from my HTC One X using xda app-developers app
---------- Post added at 05:21 PM ---------- Previous post was at 05:19 PM ----------
His name is xmoo
Sent from my HTC One X using xda app-developers app
can you link me the ruu
can you link me the RUU because i cant find the right one , and can you link me the USB Y-Cable or can you tell me the way to do it via a USB OTG cable ?
First of all do NOT post in 2 sections the same QUESTION !!! THIS IS THE GENERAL
And its all wrong info.....you dont need a card reader or anything. Just a laptop and a original charger cable.
Hook the phone on the pc and put it in the fastboot usb mode (bootloader)
Open a commandprompt inside the fastboot folder on the pc and type
Fastboot getvar version-main
With that number we can get a ruu
Sent from my GT-P5110 using xda app-developers app
---------- Post added at 06:24 PM ---------- Previous post was at 06:19 PM ----------
Case continues in the Q&A section ...not here !!!!
Sent from my GT-P5110 using xda app-developers app
ok ! but after getting the ruu how do i push the files onto my phone ???
Or simply download any rom of your choice that you'd like to use , i'd suggest SENSE based rom till you get used onto flashing.
After that flash recovery of your choice , i'm suggesting you CWM 5.8.4.0 ( fastboot flash recovery recovery.img ) and then fastboot erase cache , then take the BOOT.IMG from the SENSE rom you would like to flash ( it's usually placed in the zip of the rom ) then copy the boot.img into your fastboot folder and type *fastboot erase cache* > *fastboot flash boot boot.img * > *fastboot erase cache*
After that get into recovery from Hboot , after you get into recovery hit *mount and storage > mount USB storage * then you'll see your storage on the PC ( don't forget to plug the phone onto pc lol ) then copy the rom you want to flash onto sdcard (make sure you use the rom from what you used boot.img previously ) , after that UNMOUNT the storage from recovery , then do these steps
wipe data/factory reset
wipe cache
get into >mount and storage
format system
format data
Format cache
hit back and go to *advanced*
Wipe dalvic cache
head back and hit *install zip from sd card* > chose zip from sd card > go to the folder where you put the ROM and click on it
After that you'll get AROMA installer and FOLLOW the instructions onscreen. after the flashing is done REBOOT === Enjoy the rom.
IF later on you would want to flash another rom(s) just follow the same instructions just skip flashing recovery again. Hope it helps =)
---------- Post added at 06:35 PM ---------- Previous post was at 06:34 PM ----------
vigneshsherlekar said:
ok ! but after getting the ruu how do i push the files onto my phone ???
Click to expand...
Click to collapse
Forget the ruu just do what i wrote above.
If you manage to fail again write here the steps you did and what you did so we can help you.
nishu_nisarg said:
When your phone does not boot anymore, but you still have access to HBOOT, you put the phone in HBOOT and connect it to your Desktop/Laptop and run the RUU so it fresh installs your phone. Let's say the USB connection does not work (Had this issue in the past with my HTC DesireHD)... What now?? Just like the old days, flash rom through SD-Card.
You need
USB Y-Cable
Cardreader
SD-Card
HTC One X (Fastboot disabled and powered off)
Latest ROM RUU.
*This only works with current stock ROM or newer version. Downgrading will fail till we have SuperCID. More about that in here!
1. Run the RUU and get the rom.zip from it. (Find it in here "c:\users\%usrename%\appdata\temp\"
2. Copy rom.zip to the SD-Card and rename it to PJ46IMG.zip
3. Put the SD-Card in the card reader.
4. Put the card reader onto the USB Y-Cable.
5. Plugin the USB Y-Cable to your One X.
6. Hold volume down and press the power button while keeping the volume down pressed. This will get you into HBOOT.
7. Wait a couple of seconds and you'll see that it finds PJ46IMG.zip
8. Follow the instructions on your screen =)
I've tried it with a USB OTG Cable and it worked. Some card readers do ask for more power, than you need a USB Y-Cable.
Questions etc. please here and not in PM!
Sent from my HTC One X using xda app-developers app
---------- Post added at 05:19 PM ---------- Previous post was at 05:18 PM ----------
I found it in xda i just copy paste it.all credit goes to that person not to me...
Sent from my HTC One X using xda app-developers app
---------- Post added at 05:21 PM ---------- Previous post was at 05:19 PM ----------
His name is xmoo
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
he don't need these steps he just need again a custom recovery to flash in fastboot and the rom he want and then the boot.img for the rom...why the hell you tell him to do these steps? it has nothing to do with his problem ...
Shan89 said:
Or simply download any rom of your choice that you'd like to use , i'd suggest SENSE based rom till you get used onto flashing.
After that flash recovery of your choice , i'm suggesting you CWM 5.8.4.0 ( fastboot flash recovery recovery.img ) and then fastboot erase cache , then take the BOOT.IMG from the SENSE rom you would like to flash ( it's usually placed in the zip of the rom ) then copy the boot.img into your fastboot folder and type *fastboot erase cache* > *fastboot flash boot boot.img * > *fastboot erase cache*
After that get into recovery from Hboot , after you get into recovery hit *mount and storage > mount USB storage * then you'll see your storage on the PC ( don't forget to plug the phone onto pc lol ) then copy the rom you want to flash onto sdcard (make sure you use the rom from what you used boot.img previously ) , after that UNMOUNT the storage from recovery , then do these steps
wipe data/factory reset
wipe cache
get into >mount and storage
format system
format data
Format cache
hit back and go to *advanced*
Wipe dalvic cache
head back and hit *install zip from sd card* > chose zip from sd card > go to the folder where you put the ROM and click on it
After that you'll get AROMA installer and FOLLOW the instructions onscreen. after the flashing is done REBOOT === Enjoy the rom.
IF later on you would want to flash another rom(s) just follow the same instructions just skip flashing recovery again. Hope it helps =)
---------- Post added at 06:35 PM ---------- Previous post was at 06:34 PM ----------
Forget the ruu just do what i wrote above.
If you manage to fail again write here the steps you did and what you did so we can help you.
Click to expand...
Click to collapse
And you are to fast. Who said he has a JB hboot onboard, hes in 2 threads at the same time and he knows crap about flashing,fastboot and installing a rom :banghead: and hes in the wrong section here .....
Sent from my GT-P5110 using xda app-developers app
One-X-master said:
he don't need these steps he just need again a custom recovery to flash in fastboot and the rom he want and then the boot.img for the rom...why the hell you tell him to do these steps? it has nothing to do with his problem ...
Click to expand...
Click to collapse
Why not , those steps are the steps for flashing custom Roms... And according to him his problem is that he flashed *nexus* rom , which is most likely *aosp/aokp* rom and my instructions are for him to flash back onto sense rom till he get used onto flashing and learn few things along the way before he hits on aosp/aokp roms.
Mr Hofs said:
And you are to fast. Who said he has a JB hboot onboard, hes in 2 threads at the same time and he knows crap about flashing,fastboot and installing a rom :banghead: and hes in the wrong section here .....
Sent from my GT-P5110 using xda app-developers app
Click to expand...
Click to collapse
Lol you're right, i just assumed he has JB hboot cuz by now everyone should have it, anyway he can do these steps even with ICS roms.
Too bad ppl don't read enough before starting to flash things on their phone like this guy here.
Before i started flashing things on HoX first i've read ALOT of things about flashing and possible issues for around a week. And trust me i've READ alot of pages in the meantime lol. Anyway maybe the Ruu solution would be the best for him if he wants to be on stock again but sooner or later he'll come back with *bootloop issue* or something similar when he starts using custom roms again, that why i wrote him these steps.
Shan89 said:
Why not , those steps are the steps for flashing custom Roms... And according to him his problem is that he flashed *nexus* rom , which is most likely *aosp/aokp* rom and my instructions are for him to flash back onto sense rom till he get used onto flashing and learn few things along the way before he hits on aosp/aokp roms.
Click to expand...
Click to collapse
yes but the problem is not everyone has a y-cable or something else and that takes much longer then other steps...he wrote he can get it booting...i think he just forget to flash boot.img which is the fault of MANY people out there because they don't read enough ...aosp/aokp/cm10 are like sense roms...just putting on sdcard flash boot.img in fastboot and erase also there the cache then flash the rom in custom recovery and that it is...nothing more or less...
That was not posted by shan, it was that other guy. Just get the main version from the OP and and get him a ruu ! If you are flashing nexus roms on a HTC one x you don't expect too much knowledge on this from the OP.
But i reported this thread due to double posting and confusing guidance. Hope you guys agree on that with me
http://forum.xda-developers.com/showthread.php?t=2136151
Please only post your question once
http://forum.xda-developers.com/showthread.php?t=2136151
First of all, I want to tell that I am a beginner and do not know much about rooting and custom ROM installation.
Few days back, I became very keen to know what is custom ROM and is there any custom ROM available for my HTC One X. I searched through internet and found one, downloaded it. Rooted my phone, Unlocked bootloader. After that I installed CWM touch recovery. Everything was going great. Then, I first flashed the kernel given along with that custom ROM. it Flashed. Then, I flashed that Custom ROM. I Showed an error. I flashed it twice or thrice but it stucked on that error. Also in a Hurry, or Excitement, I forgot to take a backup of my previous ROM. After that, I switched on my phone it does nothing and stucked at HTC Bootscreen. I factory reset my phone, it wiped all data from phone. I Thought, a RUU would work, but it also doesn't worked.
I went to HTC Service Center, they are saying that motherboard will be replaced, which is almost of same cost of phone. I cannot spend so much.
I tried so many ways, but nothing worked.
So, I am Finally here seeking help from Experts. Any help will be highly appreciable.
Sorry for my bad English.
Details :
HBoot: 1.73
S-ON
Endevouru
Try this, flash this recovery :
https://www.dropbox.com/s/qp21ubo10xetcvn/Philz recovery 5.15.9.img
Make a full wipe and install the rom.zip. and flash the boot.img from the rom.zip
What rom were you trying to flash ?
If its a kitkat ROM you can't use cwm recovery to flash that rom.. you either use philz recovery given by mr hofs or latest twrp recovery from the twrp thread or indexed listing thread..
a.broken.star said:
If its a kitkat ROM you can't use cwm recovery to flash that rom.. you either use philz recovery given by mr hofs or latest twrp recovery from the twrp thread or indexed listing thread..
Click to expand...
Click to collapse
You mean this one
https://www.dropbox.com/s/14c1ikgsp38axwv/twrp-recovery2.img
Righto...:thumbup:
i was trying to flash MaximusHD rom.
and Philz recovery i have tried already. The problem is I do not have access to storage. All i have is Bootloader access. and nothing on my phone
Charge the battery, unlock the bootloader, flash the custom recovery and install a new rom
Mr Hofs said:
Charge the battery, unlock the bootloader, flash the custom recovery and install a new rom
Click to expand...
Click to collapse
i have tried this too.. no ROM is being flashed. everytime it ends with some error(s)
What error ??? Be more specific otherwise we cant get 1 step ahead
1: Is your bootloader unlocked ?
2: flashes the custom recovery ?
3: what rom ?
4: did you also flashed the boot.img ?
Please answer specifically !
Mr Hofs said:
What error ??? Be more specific otherwise we cant get 1 step ahead
1: Is your bootloader unlocked ?
2: flashes the custom recovery ?
3: what rom ?
4: did you also flashed the boot.img ?
Please answer specifically !
Click to expand...
Click to collapse
1. Bootloader was unlocked, i have relocked it. I'll unlock it. no Issues.
2. I have tried CWM philz touch custom recovery. I'll install it again
3. It do not have any ROM at present. Earlier it had 4.2.2 JB Stock ROM
4. Yes, I flashed boot.img. Nothing worked
1. Unlock the bootloader again
2. Flash the Philz-Recovery
3. Boot the Recovery
4. Install the Rom via ADB-Sideload
5. Reboot to bootloader
6. Flash the Kernel (boot.img)
7. Reboot into system
If you get an error, then post the Code here , so we can find out what's wrong with your phone.
Sent from my HTC One using XDA mobile app
HD2Bastler said:
1. Unlock the bootloader again
2. Flash the Philz-Recovery
3. Boot the Recovery
4. Install the Rom via ADB-Sideload
5. Reboot to bootloader
6. Flash the Kernel (boot.img)
7. Reboot into system
If you get an error, then post the Code here , so we can find out what's wrong with your phone.
Sent from my HTC One using XDA mobile app
Click to expand...
Click to collapse
sorry for this stupid question. But how to use ADB Sideload..??
Just mount the sdcard in the mounts and storage menu ! No need for adb sideload
And don't just install the rom, you must perform a full wipe before that !
Factory reset
Wipe cache partition
Wipe dalvik cache
Format system
Format data
Format cache
Then install the rom !
Mr Hofs said:
Just mount the sdcard in the mounts and storage menu ! No need for adb sideload
And don't just install the rom, you must perform a full wipe before that !
Factory reset
Wipe cache partition
Wipe dalvik cache
Format system
Format data
Format cache
Then install the rom !
Click to expand...
Click to collapse
ok i will try this and will be back with whatevr result comes out....
I bricked mine too , this is what I did
mohitsinghl said:
ok i will try this and will be back with whatevr result comes out....
Click to expand...
Click to collapse
If that doesn't work try this , this is what I did when I bricked my HTC One X:
1. Download Fastboot
2. Download adb
3. Download cm-10.2.1-endeavoru.zip (https://download.cyanogenmod.org/?device=endeavoru)
(I used this one , it's justs so you get your SD Card Working again and you can
put ROMS and everything on it again)
4. Download openrecovery-twrp-2.4.0.0-endeavoru-JB (http://techerrata.com/browse/twrp2/endeavoru)
(This one will be used because it has touch ability's and you can install ROMS with it )
4.1 Or you can download recovery-clockwork-touch-6.0.4.7-endeavoru.img (a.k.a Philz recovery)
(This one will be used because it has touch ability's and you can install ROMS with it )
( I used Philz recovery 5.15.9.img (provided by Mr Hofs -> who is a great guy btw)
5. Download openrecovery-twrp-endeavoru-2.1.7 (http://techerrata.com/browse/twrp2/endeavoru
(This one will be used for adb push commands, openrecovery-twrp-endeavoru-2.1.7 has a built
in ability for your sd-Card , adb can recoginze it but the problem is your touch will not work.)
6. Go into bootloader -> fastboot and do this:
6.1 fastboot flash recovery openrecovery-twrp-endeavoru-2.1.7.img
7. Go into recovery (Hboot -> recovery)
7.1 just open the recovery, your touch will probably not work. DONT LOCK IT JUST LEAVE IT OPEN
(ADB sideload didn't work for me so that's why we are going to do this)
IF YOUR TOUCH WORKS YOU CAN SKIP STEP 8
7.2 do this command: adb devices
If you don't find your devices in this then the next steps will not work.
YOU HAVE TO SEE YOUR DEVICE
7.3 do this command: adb push cm-10.2.1-endeavoru.zip /sdcard/
You can only do cm-10.2.1-endeavoru.zip if the zip file is located in the same folder your using
with command. I'm not sure about /sdcard/ . I cant remember anymore But this will put the
but this will put the zip Directly on your SDcard.
8. Go to bootloader -> fastboot
8.1 do this command: fastboot flash recovery openrecovery-twrp-2.4.0.0-endeavoru-JB.img
8.2 or do this command: fastboot flash recovery Philz recovery 5.15.9.img
Your touch wasn't working but it will work now.
9. Go to booloader -> fastboot
9.1 extract the boot.img from the Download cm-10.2.1-endeavoru.zip into the fastboot folder
9.2 do this command fastboot flash boot boot.img
9.3 fastboot erase cache
10. Go back to recovery
10.1 Wipe User Data
10.2 Wipe data cache
10.3 Go to advanced -> wipe Dalvik Cache
11. Install zip from sdcard
11.1 Choose cm-10.2.1-endeavoru.img
11.2 Install the zip WITH full wipe
12. After the install, reboot. You should have a full functional HTC ONE X now
13. Now but your ROM's(ZIP FILES)/Recovery(ZIP FILES)/Kernels and everything you want on your HTC because
You can see your HTC on your PC again!
I tried adb push.. But i cant find the pushed zip on sd card in recovery.. Moreover i tried flashing using fastboot command i.e. fastboot flash zip rom.zip it ended with an error <remote not allowed>
Sent from my Titanium S5 using XDA Free mobile app
For maximus hd do this :
Flash Philz 5.15 and mount the sdcard and wait literally minutes to let the sdcard pop up, copy the rom, do a full wipe and install it then also flash the boot.img from the maximus rom in the bootloader and reboot the phone
Don't make this so hard on yourself !
Philz 5.15 recovery is not flashed. And ended with an error 0xa . any other way??
Sent from my Titanium S5 using XDA Free mobile app
Uhm really.....second time : post the error/your taken steps ! I'm not playing a game of sharades here ......
If it's not flashed you are doing something wrong
Please don't get angry on me.. M a beginner.
Okey now i have managed to flash philz recovery version 6 i.e. philz touch 6 but still cant get storage popup on my pc. I waited 30 mins after clicking mount /storage/sdcard0
Sent from my Titanium S5 using XDA Free mobile app
Thanks to Nakum for the assistance. (Nakum can be found at drnakum on Yuforums or at dr.nakum on XDA) and to Mr.Anish for telling us that the latest TWRP recovery works.
Ok guys, so Nakum succesfully managed to root the device and I was able to do so as well. The Procedure is similar to Yureka, except you use the latest TWRP version and the latest chainfire SU binary 2.46.
This method can be done using a Hot boot or by flashing. If you want to retain the original recovery, do it by hotboot. If you want a vustom recovery, then flash it.
Here is a noob friendly guide.
1) Enable Developer Option (Go to Settings-> About Phone -> Tap on Build number 7 times)
2) Go to Developer Option and disable Update Recovery
3) Enable Android Debugging
4) Install the 15-Second ADB driver file (http://forum.xda-developers.com/showthread.php?t=2588979)
5) Download adb+fastboot zip (https://www.androidfilehost.com/?fid=95916177934556622)
6) Download Su binaries (https://download.chainfire.eu/696/SuperSU)
7) Copy UPDATE-SuperSU-v2.46.zip to an SD card
8) Download TWRP (https://s.basketbuild.com/uploads/devs/vishal_android_freak/yu/yureka/TWRP_V2.8.7.0_YUREKA.img)
8) Connect Phone to PC and navigate to the folder where you have abd+fastboot
9) Shift+right click -> Open command prompt
Type : adb devices
If your device is connected you will get it in connected devices
Type : adb reboot-bootloader
Your phone will restart into bootloader.
Type : fastboot -i 0x1ebf oem device-info
If your bootloader is unlocked, it will say "True", else it will say "false". If it is False, then do the next step
Type : fastboot -i 0x1ebf oem unlock
WARNING : All your userdata will be GONE! Now you can root your phone in two ways
Method 1 : If you want to retain the Original Recovery - Hot boot
Type : fastboot -i 0x1ebf boot TWRP_V2.8.7.0_YUREKA.img
This will launch TWRP on your device. Navigate to where you saved the UPDATE-SuperSU-v2.46.zip file. Flash it, wipe Cache, Reboot and you are rooted!
Method 2: If you want to flash Custom Recovery - Flash
Type : fastboot -i 0x1ebf flash recovery TWRP_V2.8.7.0_YUREKA.img
Your Cyanogen recovery will be replaced with TWRP. Then, unplug your device, hold volume up+down+power to boot into recovery, navigate to where you saved the UPDATE-SuperSU-v2.46.zip file. Flash it, wipe Cache, Reboot and you are rooted!
Hit thanks/like if this helped
Hope this helps! If you guys need any clarification, feel free to ping me!! Have fun!
EDIT : For those stuck in a bootloop! After flashing TWRP, go to Wipe and hit Format Data...then reboot to recovery (everything will be mounted by now) and flash the chainfire SU binaries. Reboot and everything should work fine. The phone may be stuck in the "Cyanogen" screen for a goot 5-10 mins before the apps start loading...so stay patient.
why i cant make nanddroid backup ??
/data cant be mount :/
---------- Post added at 03:17 AM ---------- Previous post was at 03:00 AM ----------
my phone now stuck in boot loop :/
what to do
---------- Post added at 03:58 AM ---------- Previous post was at 03:17 AM ----------
guys recovery is not opening n i cant boot the phone in fastboot or in bootloader
plzzzz help
---------- Post added at 04:57 AM ---------- Previous post was at 03:58 AM ----------
when do factory images will be released guys ?
i guess thats the only way to boot my device now :'(
---------- Post added at 05:01 AM ---------- Previous post was at 04:57 AM ----------
can anyone can pull the original cwm recovery from the yureka plus n upload ?
Wow wow champ...chill. Tell is what you did exactly and I will tell you how to recover your phone.
Btw this is for the others....just to show that rooting works.
This method works. But I got some bug with the TWRP installation in one of the phones. It wasn't able to reboot the phone or switch it off via recovery. So I think I'll probably try reinstalling the recovery. On the second device, this method worked flawlessly. A third one will be arriving later, by next week. I'll probably try installing CWM next time. If possible, make a video, or give more info in the steps to help people figure out if they performed the steps correctly or not, because the phone has been recently launched, and there's not a lot of information about it on the internet. Anyways, many thanks for the guide! CHEERS!
---------- Post added at 06:29 AM ---------- Previous post was at 06:12 AM ----------
Also, If you could add some information on how to reset the phone to its stock settings, and stock recovery, that would be great. I wasn't able to fix the TWRP problem by reinstalling it. So I would like to go through all the steps from the start again.
And I managed to soft brick my device, when I tried CWM on it. Is there a way I can enter download mode manually I mean by button combinations?
---------- Post added at 07:53 AM ---------- Previous post was at 07:40 AM ----------
I fixed it, but the recovery is still not working like it should. It did work on the other device though. I don't know what the issue is. Need to figure out a way to go back to stock recovery.
rakave said:
Wow wow champ...chill. Tell is what you did exactly and I will tell you how to recover your phone.
Click to expand...
Click to collapse
I'm skipping the adb part.
- First rebooted the phone In bootloader via adb
- Then unlocked the boot loader
(i noticed in bootloader device
Tampered was true even though i just got my device and box was sealed may be this could be the reason of brick?)
- Then flashed(not booted) twrp from above link.
- Then rebooted in to recovery
- Tried to take back up but it didnt work (mounting /data failed)
- Then used pen drive via otg to flash superuser ( it flashed but only on /system, /data was again failed to mount)
- Then restarted
- but after yu logo phone restart it self in to twrp then format /cache then restart again
Then this goes forever
Can u help to boot my phone again
Only
Yesterday i got it n now its soft bricked
Sent from my Galaxy Nexus using xda premium
Found the solution...!!!!!!!!!1
Hey guys.... I also tried rotting my Yureka plus and after following everything, I get stuck on the bootloop... after wasting 3 hours on net, I tried some steps myself and it fixed the issue.
Let me tell you the steps which I did:
Switched off my Yureka.. took the memory card out....
rebooted to TWRP recovery, I went to "wipe" > "format data"..
Data was successfully foramtted.
ALL DONE!!!!!!!!!
Now, you will be able to mount data and flash SuperSU without any issues...
It can take 4 to 5 minutes for the phone to start up (on the "Cyonogen" logo").
If you are experiencing issues, you can email me at asksree24by @ gmail.com
If you are stuck in a bootloop, just format data and everything will work. Let it load for a while. Dont worry...it stays in the cyanogen logo for a good 5-10 mins easily.
Thank you so much
Now its booting
Sent from my Galaxy Nexus using xda premium
Viola!!!!! I must try to root my device now...! Was waiting for confirmation on this guide...!!!
Sent from my YU5510 using Tapatalk
what type of data will get wiped? and Will I not be able to get OTA 5.1 after rooting
Guys,
Please tell whether my installed apps and organized Screens like grouping app shortcuts in folders will also get deleted or gets reset? Will all installed apps go away? or Do I need to re-login after unlocking bootloader?
If possible, Please elaborate that what kind of User-Data will get wiped?
and Will I not be able to get OTA 5.1 version update after rooting?
Thnx
Works great for me thnx buddy
last step remaining help me......
Sir, i have unlocked bootloader it shows true in tampered and unloacked.. but shows false in "charger screen enabled"..
and i am not able load TWRP img file in any of the method given below..
HELP ME
need assistance
rakave said:
Thanks to Nakum for the assistance. (Nakum can be found at drnakum on Yuforums or at dr.nakum on XDA) and to Mr.Anish for telling us that the latest TWRP recovery works.
Ok guys, so Nakum succesfully managed to root the device and I was able to do so as well. The Procedure is similar to Yureka, except you use the latest TWRP version and the latest chainfire SU binary 2.46.
This method can be done using a Hot boot or by flashing. If you want to retain the original recovery, do it by hotboot. If you want a vustom recovery, then flash it.
Here is a noob friendly guide.
1) Enable Developer Option (Go to Settings-> About Phone -> Tap on Build number 7 times)
2) Go to Developer Option and disable Update Recovery
3) Enable Android Debugging
4) Install the 15-Second ADB driver file (http://forum.xda-developers.com/showthread.php?t=2588979)
5) Download adb+fastboot zip (https://www.androidfilehost.com/?fid=95916177934556622)
6) Download Su binaries (https://download.chainfire.eu/696/SuperSU)
7) Copy UPDATE-SuperSU-v2.46.zip to an SD card
8) Download TWRP (https://s.basketbuild.com/uploads/devs/vishal_android_freak/yu/yureka/TWRP_V2.8.7.0_YUREKA.img)
8) Connect Phone to PC and navigate to the folder where you have abd+fastboot
9) Shift+right click -> Open command prompt
Type : adb devices
If your device is connected you will get it in connected devices
Type : adb reboot-bootloader
Your phone will restart into bootloader.
Type : fastboot -i 0x1ebf oem device-info
If your bootloader is unlocked, it will say "True", else it will say "false". If it is False, then do the next step
Type : fastboot -i 0x1ebf oem unlock
WARNING : All your userdata will be GONE! Now you can root your phone in two ways
Method 1 : If you want to retain the Original Recovery - Hot boot
Type : fastboot -i 0x1ebf boot TWRP_V2.8.7.0_YUREKA.img
This will launch TWRP on your device. Navigate to where you saved the UPDATE-SuperSU-v2.46.zip file. Flash it, wipe Cache, Reboot and you are rooted!
Method 2: If you want to flash Custom Recovery - Flash
Type : fastboot -i 0x1ebf flash recovery TWRP_V2.8.7.0_YUREKA.img
Your Cyanogen recovery will be replaced with TWRP. Then, unplug your device, hold volume up+down+power to boot into recovery, navigate to where you saved the UPDATE-SuperSU-v2.46.zip file. Flash it, wipe Cache, Reboot and you are rooted!
Hit thanks/like if this helped
Hope this helps! If you guys need any clarification, feel free to ping me!! Have fun!
EDIT : For those stuck in a bootloop! After flashing TWRP, go to Wipe and hit Format Data...then reboot to recovery (everything will be mounted by now) and flash the chainfire SU binaries. Reboot and everything should work fine. The phone may be stuck in the "Cyanogen" screen for a goot 5-10 mins before the apps start loading...so stay patient.
Click to expand...
Click to collapse
Hi... Can I install ROMs available for yureka
Hey guys, when I tried downloading asphalt 8 on this device, it showed that this app isnt available in your region but my region on the google acc is set right. I also tried clearing the app data for playstore and re-installing play services but it doesnt seem to work. Can anybody please help me?
seriousia said:
I'm skipping the adb part.
- First rebooted the phone In bootloader via adb
- Then unlocked the boot loader
(i noticed in bootloader device
Tampered was true even though i just got my device and box was sealed may be this could be the reason of brick?)
- Then flashed(not booted) twrp from above link.
- Then rebooted in to recovery
- Tried to take back up but it didnt work (mounting /data failed)
- Then used pen drive via otg to flash superuser ( it flashed but only on /system, /data was again failed to mount)
- Then restarted
- but after yu logo phone restart it self in to twrp then format /cache then restart again
Then this goes forever
Can u help to boot my phone again
Only
Yesterday i got it n now its soft bricked
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Okay the same thing happened with me yesterday with my friend's yuphoria but i managed to get it to work after 2 hours of hit and trial methods, first of all you will need to install the stock recovery(debuggable) for the phone and then do a factory data reset and then flash the twrp recovery again and then wipe data, cache, dalvik and everything in the advanced wipe section. this will erase everything on the device, even the rom(at least in my case it said 'no OS installed'). Since there in no custom rom available for the device currently, you will have to download the stock rom (fastboot version) and have to flash everything using fastboot.
Good luck
udayaggarwal1980 said:
Okay the same thing happened with me yesterday with my friend's yuphoria but i managed to get it to work after 2 hours of hit and trial methods, first of all you will need to install the stock recovery(debuggable) for the phone and then do a factory data reset and then flash the twrp recovery again and then wipe data, cache, dalvik and everything in the advanced wipe section. this will erase everything on the device, even the rom(at least in my case it said 'no OS installed'). Since there in no custom rom available for the device currently, you will have to download the stock rom (fastboot version) and have to flash everything using fastboot.
Good luck
Click to expand...
Click to collapse
Ty bro but its already solved
Device was getting stuck because /data partition was not mounting
But after formating /data partition ohone booted perfectly
Sent from my YU5510 using xda premium
Very o
seriousia said:
Ty bro but its already solved
Device was getting stuck because /data partition was not mounting
But after formating /data partition ohone booted perfectly
Sent from my YU5510 using xda premium
Click to expand...
Click to collapse
Okay!!! so are you happy with the phone now?? is it a good buy after root?? do you have any complaints now about battery and heating.. I actually purchased the device and returned it becoz of the poor battery performance and lag in transitions. so how is it now??
I'm stuck over here as well mate, what am I supposed to do next? Please Help :crying:
---------- Post added at 03:02 PM ---------- Previous post was at 02:54 PM ----------
rakave said:
If you are stuck in a bootloop, just format data and everything will work. Let it load for a while. Dont worry...it stays in the cyanogen logo for a good 5-10 mins easily.
Click to expand...
Click to collapse
How can I do that bro? my phone keeps restarting again and again, it restarts right back into TWRP.