Related
Does anyone have a working version of that app yet?
Sent from my T-Mobile myTouch 3G Slide using XDA App
Great question for the app section... To my knowledge Barnacle works for some but can be 'finicky'. Otherwise, no.
Yea I couldn't get barnacle to work
Sent from my T-Mobile myTouch 3G Slide using XDA App
here is the the one I'm using for TeamFenix 1.7.1 which is based off of one of the CM nightlies, and I haven't had any problems at all, just downloaded, installed using Astro File Manager and was up an running on my netbook. http://code.google.com/p/android-wifi-tether/downloads/detail?name=wireless_tether_2_0_5-pre3-test3.apk
barnacle ususally works. just disable wpa_supplicant. go to barnacle's settings and check skip wpa_supplicant. ran it for a few hours on windows. works well.
Barnacle is the only one that people claims works. I haven't been able to get any Ad-hoc to work with Linux, but Windows works with Barnacle.
Not related to wireless, but there is built-in USB tethering which I prefer if I can get signal at my laptop. Just plug in the USB, go to Settings->Wireless & Networks->Tethering and check 'USB Tethering'. If it prompts for drivers tell Windows to manually use 'Remote NDIS Device for Internet Sharing' by 'Microsoft Incorporated'.
I'm trying to find a working wifi tether app for cm 6.0 as well. Ive tried Barnacle and it doesnt work even when I disable wpa supplicant. The computer sees it and connects but no webpages will load.
I also tried a few different wifi tether apk's from googles site and everyone makes my phone crash and reboot.
wireless app works for my ipad or any other device. I just can not get to tether to another android phone, it used to work no problem. The phone will not even recgonize the wireless network. Right now i have a samsung droid charge and tmobile g2x. I have also tried with a samsung vibrant. no combination works. But they will work with ipad and laptop. sometimes one phone might not have good service, so I would like to use wireless in them situations. Thanks
I have a rooted Droid Incredible running Cyanogen 7. I have never been able to get the built in wireless hotspot functioning even when I was running Cyanogen 6. Here is what is happening:
I can turn on the wireless hotspot feature and my laptop is able to see the SSID. When I try to connect the connection is unsuccessful. It looks like it it hanging at obtaining an IP address.
I was able to get the Wireless Tether app from the market to work but when I use it I have to turn it on once then turn it off then turn it on once again in order to be able to connect to the SSID. The other issue is that when I activate it my notification bar shows the Wireless Tether connection active as well as an icon for the built in wireless tethering. Its not a big deal but it clutters my notification bar and it annoys me.
Can someone give me some help getting my build in wireless tethering working?
The problem with the built in tether is once you go over a certain limit verizon will start charging you, so I would recommend using the free tether app man.
Sent from my Incredible using XDA App
What would be the difference between wireless tether app and the wireless tether built in to cm7? Why would Verizon charge for one but not the other?
Sent from my ADR6300 using XDA App
Because Verizon gets notified when you use the built-in tether, if you use the one on the market they will beverages know.
I stopped using cm7 because of that same tether issue, but for me the internet wouldn't work at all, my pc would connect to the "android tether" just fine, but no internet feed.
killing in the name of...
As I understand it the only way you would be charged is if you're using Verizon's tethering app, which is separate from the built in tethering in CM7.
Yes, this is true, but even with that my pc and 360 would connect with it, but still no internet. But with any other Rom (stock included) it would work beautifully!!!!!
killing in the name of...
I noticed this for the first time today with CM7 which I installed on Friday. Will have yo try the new final to see if the wireless tether works. Would be very disappointed if it doesn't work! I don't want to go back to Virtuous.
Sent from The Incredible.
I don't really use it but I tested it and it works fine for me.
I guess I don't really mind using the wireless tether app from the market but there are issues.
1. How do you stop both icons from showing in the notification tray?
2. How do you stop the app from showing updates with the new market? The newest versions don't work on the incredible.
What tethering app do we have that is working with the E4GT.
i am interested too...any non root solutions.
Sprint hotspot doesnt work?
The newest version works. Version 3.1 beta 6. Just enable the Access control. I didn't change any settings..
http://db.tt/tqc770f
Sent from my SPH-D710 using xda premium
JohnCorleone said:
The newest version works. Version 3.1 beta 6. Just enable the Access control. I didn't change any settings...
http://db.tt/tqc770f
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
+1 works for me
Sent from my Samsung Galaxy S2
A link including qbkings video...
http://forum.xda-developers.com/showthread.php?t=1268548
Sent from my SPH-D710 using xda premium
The video demoing it on an Epic 4G (original)? It works for the most part as long as you don't need encryption or Infrastructure mode.
I think there is a new profile needed for Wifi Tether + some kernel work possibly.
BTW for those not rooted EasyTether does work with USB connection to Win/Linux/Mac. I'm holding out for an unroot method before rooting for WiFI so this is working in the meantime. The free version works for most things but you must buy ($10) to get https pages.
Can someone please elaborate on how to get wifi tether working? I have rooted succesfully and even enabled Access control in the app as John stated above but it still isn't connecting. What is the additional work that is needed? PLEASE HELP! Thanks!
USB debugging I think has to be enabled also.
I have that enabled, still not working
Same here... no SSID being broadcasted.
I can't get wifi tether to work at all it keeps using ad hoc mode and my laptop never connects what setting do you guys have
Sent from my SPH-D710 using XDA App
It's only goign to do ad-hoc for now. I think there is either some kernel work or rom customization to support some of the Infrastructure mode features or maybe just a new profile in Wifi Tether since it doesn't recognize the phone currently and falls back to the generic profile.
angst911 said:
USB debugging I think has to be enabled also.
Click to expand...
Click to collapse
How do you set that?
BUMP
Anyone have any luck with this yet? Ad hoc mode is useless to me. Need infrastructure/AP mode, please.
How to use Wireless Tethering for Root Users on Epic 4G Touch
After reading hundreds of pages on this website & others, here's what I've concluded after 12 days with my new Epic 4G Touch:
1. The entire Samsung Galaxy S2 series may be unable to broadcast anything but AD-HOC. However, if infrastructre can be achieved, I expect someone on XDA or Cyanogen to accomplish it within 30 days.
2. Most receiving devices (such as a notebook, netbook or tablet) can be tweaked so that they can recognize AD-HOC. It involves replacing the wpa_supplicant which is commonly found in your system/bin folder. Google your device name, AD-HOC and wpa_supplicant and you'll likely be directed to web pages with the solution for your device.
3. If you're trying to tether an Epic 4g Touch to an Acer A500 Tablet I have a much simpler solution for you: Root it and then install the Taboonay custom ROM which will instantly modify your tablet WiFi so it sees ALL available AD-HOC signals.
4. After trying nearly half the different version of wireless tether, I found thee WiFi V3.1 beta 6 to work flawlessly without changing anything on my Epic 4G Touch.
NOTE: Until this is a VERY stable custom ROM I suggest simply rooting, installing ClockworkMod Recovery, SuperUser 3.0 which is required by WiFi Tether.
I've been tethering with pdanet because I want to hide my tether usage. Does sprint ever send out warnings/ultimatums about tethering without their "service"? I'm only using 4g if that matters.
Been able to tether my laptop &netbooks with both versions of wireless tether that I tried. My issues arise when trying to connect my Samsung 10.1 tablet, the AndroidTether is not coming up as a internet option, has anyone gotten their 10.1 to connect to their epic touch4g?
http://forum.xda-developers.com/showthread.php?t=1083182&page=4
This thread solved the wireless tethering issues on my galaxy 10.1 tab
Has anyone found the Samsung drivers necessary to get the native USB tethering working? I see the drivers mentioned in the user manual, but haven't gotten a hold of them yet...
Manual:
Tethering
Tethered Mode allows your computer to obtain an external data connection by using the device’s wireless data services and a wired USB connection. Tap USB tethering to activate tethering mode.
Important: If you are using your device for Tethering, you may be prompted for additional drivers. The Samsung Mobile Driver for SPH-D710 contains the ADB, CDMA, & WiMAX drivers that are required for using either Tethering (Phone as a Modem) or development tools.
- Go to SAMSUNG and visit the D710 Product page, where you can navigate to the Download Center to obtain this driver.
- The online FAQ also provide detailed information about this driver.
- A wireless data connection can be done by using the device’s Sprint Hotspot feature.
1. Press > and tap > Wireless and network > Tethering.
2. Tap USB tethering to add a checkmark and activate the feature. The USB tethering icon is displayed at the top of your screen.
Click to expand...
Click to collapse
However at that website, all you can currently download is the manual - no drivers. Any ideas? Anybody know where to get the drivers?
Thanks
There is a 99.9% chance that this is disabled (by Sprint) anyway without using Sprint's $30/mo official method.
Wait for root and modded roms.
daneurysm said:
There is a 99.9% chance that this is disabled (by Sprint) anyway without using Sprint's $30/mo official method.
Wait for root and modded roms.
Click to expand...
Click to collapse
Well with a USB cable plugged in, you can turn the feature on, but the computer doesn't recognize it without the drivers. I'm hoping that's a good sign...
Nrbelex said:
Well with a USB cable plugged in, you can turn the feature on, but the computer doesn't recognize it without the drivers. I'm hoping that's a good sign...
Click to expand...
Click to collapse
I would be thrilled if that were the case. It isn't likely, but, bigger things have been overlooked before.
Please report back with results.
I've got a call in to Samsung tier 3 support and was promised a call back with more info, so I'll keep you apprised.
OP Delivers!
Looks like they put the drivers up. At work right now, but I'll be testing them tonight!
http://www.samsung.com/us/support/downloads/SPH-D710ZKASPR
Select "Software" next to "Manuals."
Unsurprisingly, it looks like Sprint has disabled USB tethering.
I've installed the drivers, and the computer and phone successfully connect. Once USB tether is enabled, however, the phone will drop both 4G and 3G connections and throw up the following (see attached screenshot):
Error 67: Registration Failure. Your Sprint data service username and/or password may be incorrect. Please try again.
Click to expand...
Click to collapse
I know the software/ drivers are configured properly because I can pass the internet connection on to the computer when the phone is connected to the internet via Wi-Fi.
Really disappointed (but not surprised)...
Anyone tried EasyTether on E4GT?
00Soul said:
Anyone tried EasyTether on E4GT?
Click to expand...
Click to collapse
Not easytether, but PDANet works.
is it free? and doesn't require root?
I haven't tried Easytether on the phone yet, but I can confirm PDAnet works and is free , although it's limited to http only and no https unless you buy the paid version. Easytether changed their application so now it has like a week trial before it shuts down.
what i hate about easytether and PDAnet is you have to have the client installed on the machine already for that to work. i liked how my EVO (rooted) had the option to USB tether on any computer... guess i gotta wait until some good ROMs come out.
Just root the phone people and install wifi tether. Works flawlessly
Sent from my SPH-D710 using XDA App
sph-d710 root and tether
Yeah, I've tried rooting the phone and then using the wifi tether and it worked for a while then it stopped working. Now I can't get it to connect to the PC.
Would be nice if there was a better way of tethering for free
peepeesea said:
what i hate about easytether and PDAnet is you have to have the client installed on the machine already for that to work. i liked how my EVO (rooted) had the option to USB tether on any computer... guess i gotta wait until some good ROMs come out.
Click to expand...
Click to collapse
If you use PDANet, the phone with PDANet installed will automatically detect if the computer has the client installed or not. If it does NOT have the client already installed, it will prompt you to download the windows EXE onto the phone, and then you can install the client onto the computer from the EXE it downloads onto your phone.
It's saved me a few times working out in the field.
I have the Sprint Hotspot hack that allows 4G or 3G to tether via Wifi without the plan. I would like USB tether as well to work, is there something that uses the NDIS instead of their own client? I know both MAC and Windows work with the NDIS device sharing... If not, what's the best one that will tether 4G via USB?
FL29 radio and im running GB 2.3.6 (dont care much about the ICS / Jelly Bean unless they have both 3G and 4G tether'able via Wifi and USB)
Anybody have played with ICS and gotten the 3G and 4G thetherable at least via Wifi? Wifi thether for root didn't work for me, reason why I went back to 2.3.6 and the FL29 Odexed SpotHot fix.
Which OS, with Gingerbread just root it and download the Wired Tether apk, from the same people that make the Wifi tether .apk I really wish they re worked the code for ICS or JB
YES YOU MUST ROOT THE PHONE!!
Otherwise Custom roms all seem to have USB and wifi tethering enabled.
spodemaster said:
Which OS, with Gingerbread just root it and download the Wired Tether apk, from the same people that make the Wifi tether .apk I really wish they re worked the code for ICS or JB
YES YOU MUST ROOT THE PHONE!!
Otherwise Custom roms all seem to have USB and wifi tethering enabled.
Click to expand...
Click to collapse
Im not using Wifi Tether for Root users, doesn't work on my Galaxy S2 with 4G...
Just a FYI... every stock ROM for this phone has always had working USB tethering in the settings.
Sent from my SPH-D710 using xda premium
Mattix724 said:
Just a FYI... every stock ROM for this phone has always had working USB tethering in the settings.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Forgot to mention I am on Boost, they don't offer tethering service for me
Hi all,
I've got a Galaxy Nexus with the mobile hotspot feature (Verizon) and I'm having trouble getting VPN software on my laptop to work properly. This is because I haven't forwarded the ports from the phone/hotspot to the laptop - I can't seem to figure out how to do that.
Anyone here know of a way to forward ports using the mobile hotspot feature?
Tried using the PortForwarder app in the market, but it doesn't seem to be working... Not rooted...
quantumalpha said:
Hi all,
I've got a Galaxy Nexus with the mobile hotspot feature (Verizon) and I'm having trouble getting VPN software on my laptop to work properly. This is because I haven't forwarded the ports from the phone/hotspot to the laptop - I can't seem to figure out how to do that.
Anyone here know of a way to forward ports using the mobile hotspot feature?
Tried using the PortForwarder app in the market, but it doesn't seem to be working... Not rooted...
Click to expand...
Click to collapse
Are you hosting the vpn server on your laptop? If not, then you don't need to port forward. I don't know about Verizon, but my provider blocks vpn and charges an extra 5 a month for access.
Sent from my Galaxy Nexus
The VPN app I'm trying to use is Hamachi.
I've got it running on 3 machines - laptop, work PC, and home PC.
home <-> work is fine
anything involving the laptop while connected to the hotspot shows a "relayed tunnel", which means the other machines can't connect directly to the laptop'a service