Develop Bugs

Unknown Imei and baseband, no network. Help needed

Hello
In advance, sorry for my bad english !
I have serious problem with my HOX since 2 week. After flashing Viper rom, I lost my Imei. I do everything : relock and unlock bootloader, install stock rom, ruu rom (ICS and JB) all version, restore from nandroid backup that I've do before, install almost all rom (Viper, Blade, Orio, Arhd, Insercoint...) but nothing :crying:, always unknown baseband and imei !
And what's weird, when I do "fastboot getvar all" from hboot I get this :
C:\fastboot>fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.39.0000
(bootloader) version-baseband: 5.1204.162.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.14.401.31
(bootloader) serialno: HT243Wxxxxxxx
(bootloader) imei: 359188xxxxxxxxx
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4151mV
(bootloader) devpower: 100
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
I think that my Imei and basband are here, but how to get it work in this phone ?
In Samsung phones, imei and baseband are stored in "EFS" folder, and it's possible to restore it, but where and how in HOX ?
Help really needed

Flash the boot.img from the ROM zip.
Steps -
1. Connect your phone to the computer.
2. Open your fastboot folder. Extract your boot.img here.
3. Hold shift and do a right click. Click open command Window here.
4. In cmd, type - adb reboot-bootloader
5. Once the phone displays "FASTBOOT USB" on the screen, type in cmd - fastboot flash boot boot.img
6. After it has finished flashing the boot, in cmd type - fastboot erase cache
7. Disconnect phone and reboot in recovery.
8. Reflash ROM
9. Wipe Cache/Dalvik Cache
10. Reboot.
P. S. - Take off your Imei no. And serial number. It may be used for bad purposes
Sent from my HTC One X using xda app-developers app

athulele said:
Flash the boot.img from the ROM zip.
Steps -
1. Connect your phone to the computer.
2. Open your fastboot folder. Extract your boot.img here.
3. Hold shift and do a right click. Click open command Window here.
4. In cmd, type - adb reboot-bootloader
5. Once the phone displays "FASTBOOT USB" on the screen, type in cmd - fastboot flash boot boot.img
6. After it has finished flashing the boot, in cmd type - fastboot erase cache
7. Disconnect phone and reboot in recovery.
8. Reflash ROM
9. Wipe Cache/Dalvik Cache
10. Reboot.
P. S. - Take off your Imei no. And serial number. It may be used for bad purposes
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Thank's, but not work, I'm on stock rom 3.20. I almost try all roms, all kind of recovery and boot.img with no chance. Now I'm looking for radio.img, maybr will work if I flash it from bootloader.
p.s : I change the imei number before post it, thank

I have the same problem, fastboot getvar all, also shows the correct imei.
I tried RUU, reflash of rom, reflash of boot.img of which nothing improved the situation.
As I returned my phone for warranty it was turned down because I unlocked the phone. The replacement would have cost me 360€ witch is too much money, for repairing a phone.
This problem may be a hardware fault and might be impossible to fix without a new mainboard.
But if someone does come up with a solution i would be keen to hear it.

Its a very common problem only with viper rom. There is no solution.

farh_an said:
Its a very common problem only with viper rom. There is no solution.
Click to expand...
Click to collapse
It's a common problem but not only with viper rom.
Samsung phones have the same problem (unknow imei and baseband), but it's simple to restore it, because all is in "EFS" folder (in Galaxy phone).
That's why I think (I hope) that htc phones have a solution, but how ?

I had exactly the same problem. Tried installing several roms and kernels but nothing made it work. After messing around for a few hours I solved it.
This is what dit the trick for me
- Whipe everything (cache, dalvik, data)
- Flash boot.img found here http://forum.xda-developers.com/showthread.php?t=1836919
- Whipe cache & dalvik
- Flash the ordroid rom
- Whipe cache again
- Reboot
For some reason this solved the problem

Maximize93 said:
I had exactly the same problem. Tried installing several roms and kernels but nothing made it work. After messing around for a few hours I solved it.
This is what dit the trick for me
- Whipe everything (cache, dalvik, data)
- Flash boot.img found here http://forum.xda-developers.com/showthread.php?t=1836919
- Whipe cache & dalvik
- Flash the ordroid rom
- Whipe cache again
- Reboot
For some reason this solved the problem
Click to expand...
Click to collapse
Thank you but it does not work for me, maybe it's because of the version 3.20.
I also want to know what recovery you used TWRP or stock, and the version of the Ordroid rom.

gmbengue said:
Thank you but it does not work for me, maybe it's because of the version 3.20.
I also want to know what recovery you used TWRP or stock, and the version of the Ordroid rom.
Click to expand...
Click to collapse
I used the clockworkmod recovery and version 15.0 of the ordroid rom

Maximize93 said:
I used the clockworkmod recovery and version 15.0 of the ordroid rom
Click to expand...
Click to collapse
Not working, will try to do it with windows xp ou 7, I'm on win 8, maybe will work

You should try that indeed, my first attempt was on Windows 8 and didnt work either. Using Windows 7 worked perfect for me.
Sent from my HTC One X using xda app-developers app

i have exactly the same problem, but flashing ordroid doesn't help. my imei and baseband still unknown, however in the bootloader i see the radio and the imei number.
i taking back to the repair centre, but they refused the warrantly because the unlocked bootloader.
update: unofficial mobile repair center cant fix my phone, they said need a special device for fix, but they doesn't have.
what does it mean?

vadonka said:
i have exactly the same problem, but flashing ordroid doesn't help. my imei and baseband still unknown, however in the bootloader i see the radio and the imei number.
i taking back to the repair centre, but they refused the warrantly because the unlocked bootloader.
update: unofficial mobile repair center cant fix my phone, they said need a special device for fix, but they doesn't have.
what does it mean?
Click to expand...
Click to collapse
i was having the same problem for the past week or so but this is what worked for me... download the appropriate file which matches your radio in the boot loader from here http://forum.xda-developers.com/showthread.php?t=1689679
then install it through recovery....
good luck :good:

Thanks it worked
gmbengue said:
Thank you but it does not work for me, maybe it's because of the version 3.20.
I also want to know what recovery you used TWRP or stock, and the version of the Ordroid rom.
Click to expand...
Click to collapse
Thanks alot it worked for me

davmwa said:
Thanks alot it worked for me
Click to expand...
Click to collapse
How you do it !

Not working. Please help!
hbutt7 said:
i was having the same problem for the past week or so but this is what worked for me... download the appropriate file which matches your radio in the boot loader from here http://forum.xda-developers.com/showthread.php?t=1689679
then install it through recovery....
good luck :good:
Click to expand...
Click to collapse
I followed your steps. Bootloader shows radio version 5.1204.167.31. So I downloaded Endeavoru_Radio_5.1204.167.31.zip and flashed it using cwm touch 6.0.4.7. But still Baseband version is unknown. No network, no wifi, no bluetooth. Please help me!!

easy answer
the answer is easy you need to install a new kernel !!! i am having the same problem every time that i install a new rom like Slim rom 4.4.4 and i am have for kernel endeavoru kk karnel 015m and is very smooth ! try it ! just install a new kernel !

Hi, i need a help with this problem.
Yesterday i bought htc one x, but i cant connect to a mobile network, airplane mode continuosly turning off, IMEI and Baseband numbers are unknown.
What should i do now, can i fix that issue?
The phone was never been used for instaling custom roms, bootloader is locked, here is the all informations that i got in fastboot mode:
LOCKED
ENDEAVORU PVT SHIP S-ON RL
HBOOT-1.73.0000
CPLD-None
MICROP-None
RADIO-5.1204.167.31
eMMC-bootmode: disabled
CPU-bootmode: disabled
HW Secure boot: enabled
MODEM PATH : OFF
Jun 21 2013, 18:24:41
and here is what i got with fastboot getvar all command:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I readed somewhere that i can fix that problem with returning to stock RUU, but i also read that i cant downgrade if i am S-ON. I dont want to brick my device so i'm asking here for help.
Can anyone please help me with this, i will provide every informations you need.
Also to mention that i have all drivers instaled, htc sync installed and deleted, fastboot and adb drivers, android sdk manager, google usb drivers, flashtool and surly some more drivers, so i can start to do what you sad to me immedietly.
Tell me if i need something more. Thanks

gmenelau said:
the answer is easy you need to install a new kernel !!! i am having the same problem every time that i install a new rom like Slim rom 4.4.4 and i am have for kernel endeavoru kk karnel 015m and is very smooth ! try it ! just install a new kernel !
Click to expand...
Click to collapse
Anyone tried this. Is working or not ?:crying:

scamex said:
Anyone tried this. Is working or not ?:crying:
Click to expand...
Click to collapse
Try restore stock rom and see if this will help no 100% metod work some time work some time not it is metter of luck

[UPGRADE] HOX SFR - VODAP203, ROM and OTA update to 4.2.2 Sense 5, Hboot 1.72

SFR - VODAP203, ROM and OTA update to 4.2.2 Sense 5, Hboot 1.72
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
banner by cypis​
Stock ROM for HOX VODAP203 (SFR)
LOOKOUT ! Screens are not reflect of original ROM. Been tweaked by me :laugh:
Look of this ROM is the same than Original Sense.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it!
* I'm not a dev, I just want to share files I found which helped me..
*/
I decided to open this thread cause I spent a lot of time to find the files that I share with you today. I just hope it will help others users with same HOX config like me.
This is not an "HOW TO", just sharing files needed.
I wanted to update my HOX which config was:
Hboot 1.36
Version 1.29.163.13
and CID VODAP203.
and bring it to Android 4.2.2 and Sense 5, and bring Hbbot to 1.72.
Thanks and credits:
Special thanks to migascalp.
Original thread: http://www.forum-generationmobiles.net/t63139-rom-zip-stock-operateur
INSTRUCTIONS:
- First of all, nandroid backup and copy all your sd files on PC !
Starting from zero (1.29.163.13), I had to wipe all data and files on sd card, so you have been warned...
In download section, you'll find:
ROM SFR_3.14.163.27.zip
OTA OTA_ENDEAVOR_U_JB_50_S_Vodafone_FR_4.17.163.3-3.14.163.27_release_3328517hcgcnspavwggc5y.zip
Hbbot 1.72 firmware.zip
Copy ROM and OTA on sdcard.
1. Unlock your device and install Clockwork Recovery
2. Do a Nandroid backup! Copy all files on PC.
3. WIPE
4. Install the ROM by CWM (install zip on sdCard) don't forget flashing boot.img inside zip (fastboot flash boot boot.img, and fastboot erase cache)
5. Reboot - You're on original SFR 3.14.163.27
6. At this stage, screen is non responding, reboot in recovery by power+vol down.
7. Flash the OTA.zip in CWM
Reboot in fastboot usb and flash boot.img in OTA.zip
8. Reboot
9. You're in android 4.2.2 Sense 5....
Screen touch is working again.
After all is done, go in settings, about and updates and it will charge 3 upgrades (camera, Sense and other tweaks).
Let HOX installing them then reboot.
And voilà !
At this stage, there is no more OTA, so ROM is 4.17.163.3 Android 4.2.2 and Sense 5.
If you want to upgrade HBOOT:
Even with the .zip method you'll need to relock/unlock the bootloader. It's NOT flashable in
recovery. Create a new account at htcdev.
Here's how to use the zip:
1. fastboot oem lock
2. fastboot oem rebootRUU
3. fastboot flash zip firmware.zip (do several times if it fails)
4. fastboot flash unlocktoken Unlock_code.bin.
There are many tutos on "how to" flash ROM, upgrade Hbbot... here on HOX android section.
Direct download URLs:
ROM - SFR_3.14.163.27.zip
https://www.dropbox.com/s/y51eyvuoe3z78pc/SFR_3.14.163.27.zip
boot.img to flash with ROM
https://www.dropbox.com/s/za9d0dxt8u55z74/boot sfr314.img
http://www.sendspace.com/file/0j293m
MIRROR:
SFR_3.14.163.27.zip.001
http://www9.zippyshare.com/v/83751600/file.html
SFR_3.14.163.27.zip.002
http://www9.zippyshare.com/v/78478227/file.html
SFR_3.14.163.27.zip.003
http://www9.zippyshare.com/v/54634601/file.html
SFR_3.14.163.27.zip.004
http://www9.zippyshare.com/v/15721385/file.html
DL the four files then open 7file, combine the four files, you're done.
OTA_ENDEAVOR_U_JB_50_S_Vodafone_FR_4.17.163.3-3.14.163.27_release_3328517hcgcnspavwggc5y.zip
https://www.dropbox.com/s/w4z4qe5af....14.163.27_release_3328517hcgcnspavwggc5y.zip
MIRROR:
OTA_ENDEAVOR_U_JB_50_S_Vodafone_FR_4.17.163.3-3.14.163.27_release_3328517hcgcnspavwggc5y.zip.001
http://www26.zippyshare.com/v/65868450/file.html
OTA_ENDEAVOR_U_JB_50_S_Vodafone_FR_4.17.163.3-3.14.163.27_release_3328517hcgcnspavwggc5y.zip.002
http://www26.zippyshare.com/v/4628396/file.html
OTA_ENDEAVOR_U_JB_50_S_Vodafone_FR_4.17.163.3-3.14.163.27_release_3328517hcgcnspavwggc5y.zip.003
http://www26.zippyshare.com/v/31432235/file.html
DL the three files then open 7file, combine the three files, you're done.
boot.img to flash with OTA
https://www.dropbox.com/s/pklltu4k8bl982l/boot ota417.img
http://www.sendspace.com/file/om49c3
HBOOT - firmware.zip
https://www.dropbox.com/s/xd7bw1gpkota95v/firmware.zip
http://www22.zippyshare.com/v/99064813/file.html
Again: I'm not a dev and have very little time to myself everyday.
If I could help you, then the goal is reached.
In that event, Hit thanks
Have a good flash
Franky
Edit 14 01 2014: uploading new links in progress
My dropbox generates too much traffic, public links suspended
Sorry for that

Thanks Man and thanks too for Migascalp

bzhmobile said:
Thanks Man and thanks too for Migascalp
Click to expand...
Click to collapse
Héhé, Pour une fois que ça se fait dans ce sens, on ne va pas s'en priver.....
Respect for baby's owner...
See you
Franky

this does not work on my device.
I have assert error on CID checking...

neith00 said:
this does not work on my device.
I have assert error on CID checking...
Click to expand...
Click to collapse
More infos needed.
Reboot in bootloader, connect in fastboot usb mode
then
type
fastboot getvar all
Then copy paste result and report.
XDA is HUGE forum.
Don't forget to quote before you answer.
See you
Franky

fgth90 said:
More infos needed.
Reboot in bootloader, connect in fastboot usb mode
then
type
fastboot getvar all
Then copy paste result and report.
XDA is HUGE forum.
Don't forget to quote before you answer.
See you
Franky
Click to expand...
Click to collapse
Here is the report.
fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.36.0000
(bootloader) version-baseband: 5.1204.164D.30
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.14.163.27
(bootloader) serialno: HT242W131562
(bootloader) imei: 35918XXXXXXXX
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: VODAP203
(bootloader) battery-status: good
(bootloader) battery-voltage: 3782mV
(bootloader) devpower: 49
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 4.735s

fgth90 said:
SFR - VODAP203, ROM and OTA update to 4.2.2 Sense 5, Hboot 1.72
3. fastboot flash zip firmware.zip (do several times if it fails)
Franky​
Click to expand...
Click to collapse
What happends when its fails? I cant get to flash the firmware zip after resetRUU​

neith00 said:
Here is the report.
fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.36.0000
(bootloader) version-baseband: 5.1204.164D.30
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.14.163.27
(bootloader) serialno: HT242W131562
(bootloader) imei: 35918XXXXXXXX
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: VODAP203
(bootloader) battery-status: good
(bootloader) battery-voltage: 3782mV
(bootloader) devpower: 49
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 4.735s
Click to expand...
Click to collapse
hopeless12 said:
What happends when its fails? I cant get to flash the firmware zip after resetRUU
Click to expand...
Click to collapse
1rst zip is to flash in recovery.
As said before:
4. Install the ROM by CWM (install zip on sdCard) don't forget flashing boot.img inside zip (fastboot flash boot boot.img, and fastboot erase cache)
5. Reboot - You're on original SFR 3.14.163.27
If OTA does not work, then you have:
- to flash original recovery
- relock your phone
Then OTA will come by itself in normal update.
I can confirm that firmware.zip is the good one for CID VODAP203.
There's tutos here on onex forum which explain how to flash it.
Let me know if something's wrong.
See you and good luck
Franky

fgth90 said:
1rst zip is to flash in recovery.
As said before:
4. Install the ROM by CWM (install zip on sdCard) don't forget flashing boot.img inside zip (fastboot flash boot boot.img, and fastboot erase cache)
5. Reboot - You're on original SFR 3.14.163.27
If OTA does not work, then you have:
- to flash original recovery
- relock your phone
Then OTA will come by itself in normal update.
I can confirm that firmware.zip is the good one for CID VODAP203.
There's tutos here on onex forum which explain how to flash it.
Let me know if something's wrong.
See you and good luck
Franky
Click to expand...
Click to collapse
Ok i'll try

neith00 said:
Ok i'll try
Click to expand...
Click to collapse
So did this work for you?
See you
Franky

Your post here is the only close thing to my solution.
Please, kindly send me a private link of the SFR 3.14.163.27 RUU you uploaded to dropbox or any other working download link of the RUU, because the one stated in this page has been disabled due to too much traffic. My email is
[email protected]
Thanks
Sent from my GT-I9000 using xda app-developers app
---------- Post added at 12:01 PM ---------- Previous post was at 11:55 AM ----------
Your post here is the only close thing to my solution.
Please, kindly send me a private link of the SFR 3.14.163.27 RUU you uploaded to dropbox or any other working download link of the RUU, because the one stated in this page has been disabled due to too much traffic. My email is
[email protected]
Thanks
Sent from my GT-I9000 using xda app-developers app

fgth90 said:
So did this work for you?
See you
Franky
Click to expand...
Click to collapse
Sorry but I did not had the time. and moreover it's my wife's phone

Michaelthx said:
Your post here is the only close thing to my solution.
Please, kindly send me a private link of the SFR 3.14.163.27 RUU you uploaded to dropbox or any other working download link of the RUU, because the one stated in this page has been disabled due to too much traffic. My email is
[email protected]
Thanks
Sent from my GT-I9000 using xda app-developers app
---------- Post added at 12:01 PM ---------- Previous post was at 11:55 AM ----------
Your post here is the only close thing to my solution.
Please, kindly send me a private link of the SFR 3.14.163.27 RUU you uploaded to dropbox or any other working download link of the RUU, because the one stated in this page has been disabled due to too much traffic. My email is
[email protected]
Thanks
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Need to push the file on web and need some time for upload. I'm on it actually.
I'll give you link tomorrow, time to go to bed and let PC working alone...
It's not a RUU but a nandroid backup. So you'll have to restore it by CWM.
See you
Franky

neith00 said:
...moreover it's my wife's phone
Click to expand...
Click to collapse

Michaelthx said:
Your post here is the only close thing to my solution.
Please, kindly send me a private link of the SFR 3.14.163.27 RUU you uploaded to dropbox or any other working download link of the RUU, because the one stated in this page has been disabled due to too much traffic. My email is
[email protected]
Thanks
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Done...

Does a JB RUU exists for the VODAP203?

kempoki said:
Does a JB RUU exists for the VODAP203?
Click to expand...
Click to collapse
Yes but it's an ooooooold one
Google it 1.26.163.2, that's why CWM recovery is the best way to have last version of android and sense.
See you
Franky
Oh sorry, no, a JB one, no...didn't see that...

The problem is when I try to use an old RUU, it has a bootloader issue: error 140 bootloader version error

kempoki said:
The problem is when I try to use an old RUU, it has a bootloader issue: error 140 bootloader version error
Click to expand...
Click to collapse
You don't have to use RUU.
You can flash zip, use recovery and then update by OTA.
Why looking for RUU?

Hi,
I have a problem : I did all what you wrote (flashed the ROM with CWM, then the boot.img with fastboot), the phone boot correctly but I can't enter my PIN code. The touchscreen is not responding, all what I can do is turning the volume up or down.
I hope you can help me solve this issue.
Thx

Need help/advice

(I'm a noob, keep that in mind plz) A few days ago, I decided to install a custom rom. I chose for the viper 4.0.7 rom (android 4.2.2 JB). I did a lot of reading and followed all the provided steps. In the end, I ended up with a "f**d up phone". At the beginning I was running android 4.2.2 (stock of course). The First thing that I did was unlocking the bootloader, after I did this I noticed that my wifi wasn't working anymore. I thought this wouldn't matter because I was going to install a different rom anyway. As stupid as I was for not making a backup, I flashed the recovery, boot img and rom. Once installed succesfully, I noticed that my wifi wasn't working either. My connection to the provider also weakens sometimes. I tried installing different roms, but still no change. Finaly when I installed a rom running on Android 4.1, my wifi started working (not good though). When I reinstalled the rom, (just to test) my wifi stopped working again... With some roms I don't have any connection to my provider, so i can't call or anything. I have no clue what to do, I have tried everything I could come up with. Also, when i install a rom android 4.3 or above, the phone ends up in a boot loop.
- relocking bootloader
- installing different roms/versions
- Ruu method. This fails, it says it can only update which also fails afterwards.
- Restoring a nandroid backup (found online). Succesfully restores, no wifi.
I really need help right now because i ran out of options..
fastboot getvar all command:
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.72.0000
(bootloader) version-baseband: 5.1204.167.31
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.18.401.2
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__E11
(bootloader) battery-status: good
(bootloader) battery-voltage: 4131mV
(bootloader) devpower: 100
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0

boaaal said:
(I'm a noob, keep that in mind plz) A few days ago, I decided to install a custom rom. I chose for the viper 4.0.7 rom (android 4.2.2 JB). I did a lot of reading and followed all the provided steps. In the end, I ended up with a "f**d up phone". At the beginning I was running android 4.2.2 (stock of course). The First thing that I did was unlocking the bootloader, after I did this I noticed that my wifi wasn't working anymore. I thought this wouldn't matter because I was going to install a different rom anyway. As stupid as I was for not making a backup, I flashed the recovery, boot img and rom. Once installed succesfully, I noticed that my wifi wasn't working either. My connection to the provider also weakens sometimes. I tried installing different roms, but still no change. Finaly when I installed a rom running on Android 4.1, my wifi started working (not good though). When I reinstalled the rom, (just to test) my wifi stopped working again... With some roms I don't have any connection to my provider, so i can't call or anything. I have no clue what to do, I have tried everything I could come up with. Also, when i install a rom android 4.3 or above, the phone ends up in a boot loop.
- relocking bootloader
- installing different roms/versions
- Ruu method. This fails, it says it can only update which also fails afterwards.
- Restoring a nandroid backup (found online). Succesfully restores, no wifi.
I really need help right now because i ran out of options..
Click to expand...
Click to collapse
You must to WIPE cache, dalvik, sormat system and data partition from recovery. After this install new rom

Thant said:
You must to WIPE cache, dalvik, sormat system and data partition from recovery. After this install new rom
Click to expand...
Click to collapse
I did wipe data/factory reset, wipe cache and wipe dalvik cache before installing a new rom. Anything i'm looking over?

For viper x :
Flash the boot.img via fastboot :
Fastboot flash boot boot.img
Fastboot erase cache
Enter the recovery and do :
Factory reset
Wipe cache partition
Advanced - wipe dalvik cache
Mounts and storage - format data,cache and system
Then install the rom, choose in the aroma for "no wipe" install and full rom install. Don't delete any apps from the lists.
Then it should boot fine.
These instructions apply with use of this recovery
https://www.dropbox.com/s/qp21ubo10xetcvn/Philz recovery 5.15.9.img

Mr Hofs said:
For viper x :
Flash the boot.img via fastboot :
Fastboot flash boot boot.img
Fastboot erase cache
Enter the recovery and do :
Factory reset
Wipe cache partition
Advanced - wipe dalvik cache
Mounts and storage - format data,cache and system
Then install the rom, choose in the aroma for "no wipe" install and full rom install. Don't delete any apps from the lists.
Then it should boot fine.
These instructions apply with use of this recovery
https://www.dropbox.com/s/qp21ubo10xetcvn/Philz recovery 5.15.9.img
Click to expand...
Click to collapse
It did install (as usual), but still no wifi.

boaaal said:
It did install (as usual), but still no wifi.
Click to expand...
Click to collapse
Have you tried the wifi patch from RichmondUK ?

Nebukad_fr said:
Have you tried the wifi patch from RichmondUK ?
Click to expand...
Click to collapse
Thats already in the rom

Try some other custom kernel and see if that helps...

I localised the problem... It seems that my phone just can't connect to my home wifi network. To solve the problem, I tried resetting the router, but no succes. I also checked if mac filtering was enabled, but it was not. Anyone got some tips left..

Hard bricked or what is there any solution helppppppp

i will show you the pics of the phone he only boot in hboot no htc logo no nothing ;] i was tryin a lots of methods no one of them works;] dont have recovery , and its locked and s-on im about to crazy ;] try downgrades ruu thru sd card but everytime says THE MAIN VERSION IS OLDER early i was boot some update thru sd card , update start but in the beggining BOOTLOADER - FAIL PU and update abort no one ruu cant start only says main version is older ;] my htc is not rooted and locked bootloader I DONT KNOW WHAT TO DO I TRY EVERYTHING POSSIBLE TO FIX IT BUT NO LIGHT IN THE TUNNEL ;[ I WILL POST NOW THE FASTBOOT GETVAR ALL if you can help me to fix this hard bricked phone
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: INVALID_VER_INFO
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.34.401.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH45SWW03613
(bootloader) imei: blablablabla
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000
(bootloader) product: a5_ul
(bootloader) platform: hTCBmsm8226
(bootloader) modelid: 0P9C20000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 09813c97
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.016s
or give me some correct ruu that will not give me MAIN VERSION IS OLD

pipaigoleko said:
i will show you the pics of the phone he only boot in hboot no htc logo no nothing ;] i was tryin a lots of methods no one of them works;] dont have recovery , and its locked and s-on im about to crazy ;] try downgrades ruu thru sd card but everytime says THE MAIN VERSION IS OLDER early i was boot some update thru sd card , update start but in the beggining BOOTLOADER - FAIL PU and update abort no one ruu cant start only says main version is older ;] my htc is not rooted and locked bootloader I DONT KNOW WHAT TO DO I TRY EVERYTHING POSSIBLE TO FIX IT BUT NO LIGHT IN THE TUNNEL ;[ I WILL POST NOW THE FASTBOOT GETVAR ALL if you can help me to fix this hard bricked phone
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: INVALID_VER_INFO
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.34.401.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH45SWW03613
(bootloader) imei: blablablabla
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000
(bootloader) product: a5_ul
(bootloader) platform: hTCBmsm8226
(bootloader) modelid: 0P9C20000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 09813c97
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.016s
or give me some correct ruu that will not give me MAIN VERSION IS OLD
Click to expand...
Click to collapse
Don't have your model 816, mine is single SIM a5_chl but this forum link had some answers for someone else with your model. Luckily your not really "hard bricked" because you can still enter hboot/fastboot but I understand why you say that. Hard bricked is when your phone is literally an expensive paperweight. Luckily you still have access to your boatloader and that's where most problems can get fixed. By the way what specifically happened that caused this issue? You're boatloader is locked and your not rooted so pure stock right with stock recovery but you can't get into recovery?
http://forum.xda-developers.com/desire-816/help/a5ul-unable-to-flash-ruu-t3294835
Also if you press the power button to select hboot you should go to fastboot mode where you can use volume key to select recovery then press power button to enter.
Below is a link to stock RUU's for yours and other models but you'll need stock recovery installed and working before they can be run. Hopefully your stock recovery is still there just need a different way to enter it i.e. Boatloader or key presses. Only flash your specific versions firmware.Try the one your were currently on before trying one older.
http://forum.gsmhosting.com/vbb/f485/htc-desire-816-official-stock-roms-always-updated-1948682/

cant go recovery
thoctor said:
Don't have your model 816, mine is single SIM a5_chl but this forum link had some answers for someone else with your model. Luckily your not really "hard bricked" because you can still enter hboot/fastboot but I understand why you say that. Hard bricked is when your phone is literally an expensive paperweight. Luckily you still have access to your boatloader and that's where most problems can get fixed. By the way what specifically happened that caused this issue? You're boatloader is locked and your not rooted so pure stock right with stock recovery but you can't get into recovery?
http://forum.xda-developers.com/desire-816/help/a5ul-unable-to-flash-ruu-t3294835
Also if you press the power button to select hboot you should go to fastboot mode where you can use volume key to select recovery then press power button to enter.
Below is a link to stock RUU's for yours and other models but you'll need stock recovery installed and working before they can be run. Hopefully your stock recovery is still there just need a different way to enter it i.e. Boatloader or key presses. Only flash your specific versions firmware.Try the one your were currently on before trying one older.
http://forum.gsmhosting.com/vbb/f485/htc-desire-816-official-stock-roms-always-updated-1948682/
Click to expand...
Click to collapse
i cant enter recovery at all ;[

pipaigoleko said:
i cant enter recovery at all ;[
Click to expand...
Click to collapse
still dont have luck with the stocks i try most of them on sdcard hboot ;[[[[

pipaigoleko said:
i cant enter recovery at all ;[
Click to expand...
Click to collapse
So you went into fastboot mode and when you press your power button to select hboot what happens?
Below is a link to a forum for the a5_ul with a link to the stock recovery. Verify this is your version then try flashing it using ADB/fastboot on your P.C. and your phone in fastboot mode. Do you have USB debugging selected in your phone developer options settings?
http://forum.xda-developers.com/desire-816/general/single-sim-816x-a5ul-stock-recovery-t2862637

thoctor said:
so you went into fastboot mode and when you press your power button to select hboot what happens?
Below is a link to a forum for the a5_ul with a link to the stock recovery. Verify this is your version then try flashing it using adb/fastboot on your p.c. And your phone in fastboot mode. Do you have usb debugging selected in your phone developer options settings?
http://forum.xda-developers.com/desire-816/general/single-sim-816x-a5ul-stock-recovery-t2862637
Click to expand...
Click to collapse
i cant turn my phone on even i dont have htc logo start in hboot yes i have now will try to flash ;] i think i have debugging but my device show is only in fastboot and dont list my device only fastboot , BUT IM LOCKED BOOTLOADER AND S-ON CRAZY STUCKING IN BOOT MENU ;] CAN I INSTALL MANUALLY RECOVERY ? BECAUSE I ADB DONT LISTED MY DEVICE

pipaigoleko said:
i cant turn my phone on even i dont have htc logo start in hboot yes i have now will try to flash ;] i think i have debugging but my device show is only in fastboot and dont list my device only fastboot , BUT IM LOCKED BOOTLOADER AND S-ON CRAZY STUCKING IN BOOT MENU ;] CAN I INSTALL MANUALLY RECOVERY ? BECAUSE I ADB DONT LISTED MY DEVICE
Click to expand...
Click to collapse
Did you have the HTC drivers installed on your P.C. or Linux computer?
flashing it using SDK Toolkit /ADB fastboot is doing it manually. The other method is to name the file a specific way so that your phone recognizes it but I have never used this method before. I downloaded the portion of the SDK Toolkit I needed, ADB/fastboot and had the HTC Windows drivers installed from HTC sync manager then put the recovery zip file into my ADB folder in my P.C. then opened command prompt from my ADB folder and typed fastboot flash recovery"name of zip file".img with my phone in fastboot and it flashed. This is what you should try and I'll link some instructions below. Good luck.
http://androidforums.com/threads/cd...ry-image-via-fastboot-or-from-sd-card.385358/
Also if ADB isn't recognizing your phone and you do have the drivers installed then it may be because of what's happened to your phone and then you would need to try and flash from your SD card with the file properly named for your version so that fastboot on your phone will recognize and flash it. I don't know what the proper name is for your version but a lot of the time it's already properly named. How did you lose your recovery in the first place with a locked boatloader and no root?
I must be getting tired. I believe you need an unlocked boatloader to flash a recovery image so you might not be able to flash it. If you can't get into your recovery thru H boot, press power button, volume button to select recovery, enter by pressing power button, then your going to need to flash the stock RUU or zip file with the stock recovery included in the file as you can flash an RUU with the boatloader locked. The issue is will the signed file recognize your firmware as it is now and flash? Wish this was my expertise but I've only flashed RUU files to start my devices clean again not to fix a problem.

nd if im not usb debugged because dont see adb devices only fastboot recognize my device ;[[[ im in big stuck ... i'll say again LOCKED , S-ON , MAYBE NO USB DEBUGGING , STUCK IN BOOTLOADER , AND RUU SAYS MAIN VERSION OLDER ;[

pipaigoleko said:
nd if im not usb debugged because dont see adb devices only fastboot recognize my device ;[[[ im in big stuck ... i'll say again LOCKED , S-ON , MAYBE NO USB DEBUGGING , STUCK IN BOOTLOADER , AND RUU SAYS MAIN VERSION OLDER ;[
Click to expand...
Click to collapse
I know my friend I read it the first time and I understand all that. I'd try the flash with your recovery zip and see if that works. If not then you'll need to flash stock RUU's until you find one that will work but only ones meant for your version . Did you click that one link I gave that was to a forum here in XDA because that forum looked like it was very similar to your problem ?
This one below
http://forum.xda-developers.com/desire-816/help/a5ul-unable-to-flash-ruu-t3294835

http://forum.xda-developers.com/desire-816/general/0p9cimga5ulk44desiresense60htceurope1-t2946515
Download the zip from the thread
Rename it to 0P9CIMG.zip
Copy it to your sdcard
Put the sdcard into your phone
Boot into HBoot, it will recognize an update and confirm
After this, you will be on stock kitkat, but you can make upgrade to lollipop

I'm uploading a RUU for this device right now.
I'll send you a pm once it's done
Do you need Stock recovery too?

nukaru said:
I'm uploading a RUU for this device right now.
I'll send you a pm once it's done
Do you need Stock recovery too?
Click to expand...
Click to collapse
ok im waiting ; ] ty YES I DONT HAVE RECOVERY I JUST NEED TO DOWNGRADE FROM 2.34.401.2 I GUESS BUT EVERYONE RUU SAYS MAIN VERSION IS OLDER

TobiBot said:
http://forum.xda-developers.com/desire-816/general/0p9cimga5ulk44desiresense60htceurope1-t2946515
Download the zip from the thread
Rename it to 0P9CIMG.zip
Copy it to your sdcard
Put the sdcard into your phone
Boot into HBoot, it will recognize an update and confirm
After this, you will be on stock kitkat, but you can make upgrade to lollipop
Click to expand...
Click to collapse
I TRY IT MAN BEFORE BUT AGAIN SAME THING MAIN VERSION IS OLDER HERE'S THE PICS SEE

hey i try with 0P9CIMG_A5_UL_L50_DESIRE_SENSE60_MR_HTC_Europe_2.34.401.2_Radio_1.101.111011.20.0123_10.28.4149A.00L_release_449710_combined_signed.zip device try to update but again BOOTLOADER -- FAIL PU BEFORE LUCKY TO ACCEPT ANOTHER UPDATE BUT GIVE ME THE SAME -- BOOTLOADER - FAIL PU

That's exactly what happened to my device. RUU is still uploading.
I'll send the recovery, RUU and a guide once it's done uploading

nukaru said:
That's exactly what happened to my device. RUU is still uploading.
I'll send the recovery, RUU and a guide once it's done uploading
Click to expand...
Click to collapse
yes but im not sure having usb debugging ....only fastboot recognize device adb dont ;] how to install recovery with no debugging but..if RUU dont give me fail pu will be nice

My fastboot didn't work either, but I got the device working again after flashing stock RUU.

nukaru said:
My fastboot didn't work either, but I got the device working again after flashing stock RUU.
Click to expand...
Click to collapse
ok buddy im waiting to try ; ]

I should be back home in about 5h, upload is in progress, should be done by the time I get back home.

luka.miskovic said:
there is a script caled misctool used to change main version number, google can help u find it. use it to change main version to 1.00.000.0 and than u can flash any version RUU
Click to expand...
Click to collapse
Thanks for the assist TobiBot. I don't have this version of phone and didn't catch this forum link when I was looking thru XDA. O.P. says he is flashing this way and not from ADB/fastboot and still keeps getting the" older version" notice. I read the whole forum you linked to and found this a few pages in. His radio I.D. is invalid in Getvar all he posted so maybe your suggestion combined with the above posters quote he can make it work. Hopefully just the fix you linked to will do it but if not this might get him the rest of the way.
---------- Post added at 09:02 PM ---------- Previous post was at 08:56 PM ----------
TobiBot said:
http://forum.xda-developers.com/desire-816/general/0p9cimga5ulk44desiresense60htceurope1-t2946515
Download the zip from the thread
Rename it to 0P9CIMG.zip
Copy it to your sdcard
Put the sdcard into your phone
Boot into HBoot, it will recognize an update and confirm
After this, you will be on stock kitkat, but you can make upgrade to lollipop
Click to expand...
Click to collapse
Oops sorry forgot to link to your post when thanking you. He's got reinforcements now too so that's good. The more the better.
---------- Post added at 09:14 PM ---------- Previous post was at 09:02 PM ----------
luka.miskovic said:
yes it does, but when u are using it it wont show u successfuly changed and u can not view current main version from it. but command "misctool w 1.00.000.0" does what it is supposed to. I tested on a5_ul with 4.4.2 and 5.0.2
Click to expand...
Click to collapse
The last quote above from the Misctool suggestion. Never tried it or heard of it but all options should be looked at to fix O.P.'s problem. Hopefully the last poster's help fixes it and this idea is moot but at least it's linked here for the next guy.
Good luck pipaigoleko !

How to get CID when computer can't detect phone?

So, after unsuccessfully flashing Lollipop to my HTC One X, I'm stuck. When I turn on the phone, I'm met with a looping "Resurrection Remix" logo that won't go away. I can boot into the CWM recovery menu, but any and all methods of restoring the phone via this menu have failed so far.
The main problem here is that my phone will only show up on my computer when I 'mount usb storage' through the recovery menu. When I try and run the 'fastboot getvar cid' command, though, it hangs on 'waiting for device' and nothing happens thereafter. I've seen that I need the correct CID so that I can get the right RUU for my phone....and even then, getting the right RUU seems to be difficult as well, with all the dead links I've seen scattered around.
I'm done with trying to get this new ROM to work, and I just want to go back to what I had on my phone. How the heck can I fix this one? I'll give you any information you need about the phone, but I just don't know how/what. Very new to all of this, and so very over my head!
Kind regards,
Jim.

I maybe wrong here as I'm not familiar with that ROM.
But your problem is wrong recovery. To install a lollipop ROM you need to use TWRP with New Layout.
CWM won't work.
You need to boot to bootloader to run fastboot command. While in recovery only adb command works.

There were multiple videos/tutorials that used this ROM with CWM, so that was why I used those 2 together. Anyways, I was indeed in fastboot when I was trying to get my CID.

In Resurrection Remix thread I read you need TWRP with new layout.
You should read the thread not some online videos/tutorials.
Try command fastboot getvar all
Also check your PC device driver show MyHtc not some warning

Simple steps to go :
1] Download Resurrection Remix 5.8.8 or any else of your choice
2] Download Twrp 3.0.2-0
-----Make sure you backup----
3]Open Twrp
4]Select Wipe
5] Advanced Wipe
6] Select everything
7] Wipe
8] Goto home of recovery
9] reboot to recovery again
10] Send the rom from pc to the phone
11] Flash!
12] Wait it to boot (first boot takes up to more than 15-45 mins)
:good:

Thank you ckpv5, I shall read threads in the future for sure. My device does show up as My HTC in Devince Manager, so it's seeing it there, just not in the cmd line.
Thanks DevUt. I had a look around for version 5.8.8 of Resurrection, but the only one I found was for a Lenovo device? Suffice it to say, I didn't want to use that one. I looked on the Resurrection site, and my device isn't actually listed at all....I then checked out CyanogenMod, and there IS a version available for the HTC One X. I think i'll go with this one. There is a very detailed wiki page on how to install it.
If (more like when) I run into any problems, i'll come back here!

Peaceful Jim said:
Thank you ckpv5, I shall read threads in the future for sure. My device does show up as My HTC in Devince Manager, so it's seeing it there, just not in the cmd line.
Thanks DevUt. I had a look around for version 5.8.8 of Resurrection, but the only one I found was for a Lenovo device? Suffice it to say, I didn't want to use that one. I looked on the Resurrection site, and my device isn't actually listed at all....I then checked out CyanogenMod, and there IS a version available for the HTC One X. I think i'll go with this one. There is a very detailed wiki page on how to install it.
If (more like when) I run into any problems, i'll come back here!
Click to expand...
Click to collapse
you can try mone CM12.1 it's pretty good!
I myself use Resurrection remix 5.5.9 (sorry it was 5.5.8)
And please use the thanks button

Hmm, well if you're using RR 5.5.9, maybe I'll go with that, since I can at least get your support with it!
I have some questions about your instructions. (My questions are in brackets)
1] Download Resurrection Remix 5.8.8 or any else of your choice (do i simply transfer the zip file to the phone?)
2] Download Twrp 3.0.2-0 (same as above)
-----Make sure you backup---- (Do i need to do this, since I have nothing on my phone?)
3]Open Twrp
4]Select Wipe
5] Advanced Wipe
6] Select everything
7] Wipe
8] Goto home of recovery
9] reboot to recovery again
10] Send the rom from pc to the phone
11] Flash! (How do I do this?)
12] Wait it to boot (first boot takes up to more than 15-45 mins)
Also, i'm trying to find RR 5.5.9 and TWRP 3.0.2-0 but all the ones i find are *example* download RR 5.5.9 for (insert phone model here)
Are they actually different? Or are RR 5.5.9 and TWRP 3.0.2-0 the same, no matter which phone?
Again, thank you for your assistance and patience!

Bump.

Bump. Could really use some help with this.

Peaceful Jim said:
Bump. Could really use some help with this.
Click to expand...
Click to collapse
Which help that you need ? If it's about the Resurrection Remix, unable to help.
First thing that we need to know whether your fastboot is working or not.
As I mentioned earlier, what happens when you type command fastboot getvar all after you connect your phone while in bootloader mode
(not hboot mode) ...
Here is mine as example ... can you get the same as these ?
(Of course with your device CID)
If possible then we can talk about installing TWRP with New Layout and ROM.
If not possible, you may need different set of HTC USB drivers.
Code:
E:\Desktop>fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.73.0000
(bootloader) version-baseband: 5.1204.167.31
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.707.5
(bootloader) serialno: [COLOR="Red"]removed[/COLOR]
(bootloader) imei: [COLOR="Red"]removed[/COLOR]
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) [B][COLOR="Red"]cidnum: HTC__044[/COLOR][/B]
(bootloader) battery-status: good
(bootloader) battery-voltage: 3744mV
(bootloader) devpower: 26
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.816s

Peaceful Jim said:
Hmm, well if you're using RR 5.5.9, maybe I'll go with that, since I can at least get your support with it!
I have some questions about your instructions. (My questions are in brackets)
1] Download Resurrection Remix 5.8.8 or any else of your choice (do i simply transfer the zip file to the phone?)
2] Download Twrp 3.0.2-0 (same as above)
-----Make sure you backup---- (Do i need to do this, since I have nothing on my phone?)
3]Open Twrp
4]Select Wipe
5] Advanced Wipe
6] Select everything
7] Wipe
8] Goto home of recovery
9] reboot to recovery again
10] Send the rom from pc to the phone
11] Flash! (How do I do this?)
12] Wait it to boot (first boot takes up to more than 15-45 mins)
Also, i'm trying to find RR 5.5.9 and TWRP 3.0.2-0 but all the ones i find are *example* download RR 5.5.9 for (insert phone model here)
Are they actually different? Or are RR 5.5.9 and TWRP 3.0.2-0 the same, no matter which phone?
Again, thank you for your assistance and patience!
Click to expand...
Click to collapse
BEFORE DOING THIS CHECK YOUR DRIVERS ,ADB CONNECTION AND FASTBOOT
Every rom and recovery are different for every Devices
You can search our forums and find out out huge collection
Backup is optional
Twrp 3 :: http://forum.xda-developers.com/htc-one-x/orig-development/twrp-htc-one-x-t3429300
You can chose any ROM that says NEW LAYOUT
P.S first convert to new layout
Flashing = Clicking on the install button ,selecting the zip , and sliding the bar to install it
Check the the thread I gave to see how to install recovery
And last when you install the in the 10] step you need to transfer the rom
And don't worry this is one time investment as you go new layout ,you don't need to do all this steps

ckpv5 said:
Which help that you need ? If it's about the Resurrection Remix, unable to help.
First thing that we need to know whether your fastboot is working or not.
As I mentioned earlier, what happens when you type command fastboot getvar all after you connect your phone while in bootloader mode
(not hboot mode) ...
Here is mine as example ... can you get the same as these ?
Click to expand...
Click to collapse
C:\Users\Jimmy\Desktop\fastboot>fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.73.0000
(bootloader) version-baseband: 5.1204.167.31
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.707.5
(bootloader) serialno:
(bootloader) imei:
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: low
(bootloader) battery-voltage: 3503mV
(bootloader) devpower: 2
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.876s

Peaceful Jim said:
(bootloader) cidnum: HTC__044
Click to expand...
Click to collapse
So you solved your first problem "How to get CID when computer can't detect phone?"
So what do you want to do next ? Back to stock as you mentioned on your first post ?
Peaceful Jim said:
I'm done with trying to get this new ROM to work, and I just want to go back to what I had on my phone. How the heck can I fix this one?
Click to expand...
Click to collapse
Or you want to install other ROM ?
Most lollipop ROMs require TWRP with New Layout. They won't work on CWM recovery.
Read this : http://forum.xda-developers.com/htc-one-x/orig-development/storage-layout-hox-endeavoru-t3022358

ckpv5 said:
So you solved your first problem "How to get CID when computer can't detect phone?"
So what do you want to do next ? Back to stock as you mentioned on your first post ?
Click to expand...
Click to collapse
Yes please! I just want my phone back to stock so I can use it again!

Peaceful Jim said:
Yes please! I just want my phone back to stock so I can use it again!
Click to expand...
Click to collapse
First - charge your device as your current battery-status is low.
Do you still have CWM recovery installed ? If yes .. just use it, transfer the stock ROM zip to your device after you mount usb storage while in recovery.
Download : https://www.androidfilehost.com/?w=files&flid=20860
You can use either one ... odexed is pure stock, deodexed is modified stock and both are non-rooted
After downloaded the stock ROM zip, extract out the boot.img
If you don't have CWM recovery installed, I suggest TWRP - use this one : https://www.androidfilehost.com/?fid=24438995911971082
fastboot flash recovery twrp2810-endeavoru-OldLayout.img
transfer the download stock ROM zip after you enable MTP (do it twice)
After you installed the ROM zip, boot to bootloader and install the extracted boot.img
fastboot flash boot boot.img
Reboot - done.
If you prefer the nandroid backup method, let me know then I'll upload my stock non-rooted nandroid backup (but this will take time)

ckpv5 said:
First - charge your device as your current battery-status is low.
If you don't have CWM recovery installed, I suggest TWRP - use this one : https://www.androidfilehost.com/?fid=24438995911971082
fastboot flash recovery twrp2810-endeavoru-OldLayout.img
transfer the download stock ROM zip after you enable MTP (do it twice)
After you installed the ROM zip, boot to bootloader and install the extracted boot.img
fastboot flash boot boot.img
Reboot - done.
Click to expand...
Click to collapse
I couldn't charge my phone simply by plugging it into the computer. It would always boot to the bootloader and never charge. However, I found a script that loads the bootloader, then turns the phone off and repeats this process. Somehow it charges the phone, just very, very slowly. Once it has 3.68v of battery, apparently that will be enough to flash a recovery onto it. So I will wait until it has charged before I try your instructions.

ckpv5 said:
fastboot flash recovery twrp2810-endeavoru-OldLayout.img
Click to expand...
Click to collapse
I get the following message:
C:\Users\Jimmy\Desktop\fastboot>fastboot flash recovery twrp2810-endeavoru-OldLayout.img
sending 'recovery' (7720 KB)...
OKAY [ 0.941s]
writing 'recovery'...
FAILED (remote: not allowed)
finished. total time: 1.145s

Is your bootloader relocked ? You need unlocked bootloader to fastboot flash recovery.
You not yet answer my previous question.. do you still have CWM currently installed ? If yes, just use CWM to install the ROM zip.

ckpv5 said:
Is your bootloader relocked ? You need unlocked bootloader to fastboot flash recovery.
You not yet answer my previous question.. do you still have CWM currently installed ? If yes, just use CWM to install the ROM zip.
Click to expand...
Click to collapse
It must be relocked. I will unlock it now. And sorry, I don't still have CWM installed. That's why i'm trying to put TWRP on there now