Have you been looking around to find the most beautiful case for your s3? I have got you covered. I have found the perfect case for the Galaxy S3.
This is a review for the SGP Spigen Bumper Ultra Lumi series. I have ordered this case before three weeks and it arrived today. As you can see from the photos, the packaging for this case is pretty good.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Once you order this case, you get the following items: 1. Case 2. Front protector 3. Back protector 4. Cleaning cloth. Normally you have to pay at least 10 dollars to get a decent pair of front and back protectors, so its a positive thing that they are included for free.
Now, lets have a look at the case. First thing i have noticed is the slim factor of the case. It looks beautiful and most of all: it looks premium. Although, if you touch the case you get that plastic feel. I dont see this as a bad thing, because it gives you at the same time the feeling that this case will do its job: to protect your investment.
As you can see from the photos, the cut outs for the usb, headphone jack, mics are perfectly lined. The buttons, both volume and power, are made of plastic. This is a good thing because its far more easy to press them from other tpu cases out there.
Also, this case has edges on the front and back of it. If you lay your phone on the table, its still protected because of these edges. Same thing goes for the front of the phone. You are protected because of these edges, so if you drop your phone on a straight floor, you are protected as well.
Now lets move on the negative side of this case. The price is little high for some people but notice that this case is one of the most beautiful cases i have ever seen (and i have seen a lot). Moreover, when you are holding your phone with this case, it doesnt have that anti-slippery feeling, that other cases give you. I dont care very much about this because i know that this case will protect my phone in every days situations.
Finally, I highly recommend this case to every s3 user in this forum. However, i dont think that it will look as great in the pebble blue s3. I am sure that it looks fantastic on my white galaxy s3 with my aluminum brushed back cover.
If i could give a rate to this case, i would rate it: 4,5/5.
Here's the pros and cons:
Pros: 1. best looking case for my taste 2. very good protection 3. easily accessible buttons
Cons: 1. pricey more some people 2. not having that anti-slippery feeling.
I hope you liked this review. If you find it helpful, hit thanks.
You can buy this case on:
http://www.spigen.com/cell-phone/samsung/samsung-galaxy-s3-case-ultra-bumper-lumi-series.html
Have a nice day everybody.
10/11/2012 ***UPDATE*** I emailed SGP Spigen and asked them when this beautiful case will be back in stock, and this is the response i got:
"We are still unsure when we will be receiving new shipments of the Ultra Bumper from our manufacturers and they haven't given us an ETA yet.* As soon as they inform us, I will be sure to send you an email".
So anyone who wants this case, HOLD on
Just got mine yesterday in Infinity White. Top quality make and feel. Loving it so far
Sent from my GT-I9300 using xda premium
decker39 said:
Just got mine yesterday in Infinity White. Top quality make and feel. Loving it so far
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
nice!! thanks for the feedback :laugh:
angie4u said:
that looks absolutely beautiful~ the White S3 with the white bumper looks amazing.
good review!
Click to expand...
Click to collapse
i know. it is hard to find a nice looking bumper for s3. i am glad, i did.
I wonder if this bumper would go with the iCarbon battery cover skin.
Kruzkal said:
I wonder if this bumper would go with the iCarbon battery cover skin.
Click to expand...
Click to collapse
try it and let us know
nice review
not a big fan of the front protection tho, very little raised lip!
kl25 said:
nice review
not a big fan of the front protection tho, very little raised lip!
Click to expand...
Click to collapse
it will protected ur phone from straight floors, tried it
This is my Next...
Sent from my SCH-I535 using Tapatalk 2
I am considering buying this case, but I'd like to combine it with the one of those aluminium back covers.
Anyone tried it?
EDIT: never mind... Just read the review better!
Sent from my GT-I9300 using xda app-developers app
b0gd4n said:
I am considering buying this case, but I'd like to combine it with the one of those aluminium back covers.
Anyone tried it?
EDIT: never mind... Just read the review better!
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
if you need more pictures, let me know
Just to be sure, maar camera dienst hit the table when laying flat?
Sent from my GT-I9300 using xda app-developers app
your camera lens and speaker will be protected when ur phone is laying on the table.
Sent from my GT-I9300 using xda app-developers app
awesome review and i think i will order one, i like bumpers on my phone instead of a case
vikramdhani said:
awesome review and i think i will order one, i like bumpers on my phone instead of a case
Click to expand...
Click to collapse
basically it is a case because it protects ur phone in every way. notice that they include front and back protectors, so you are fully protected :good:
Have you try this bumper with the brush aluminum back? The brush aluminum back is thicker than stock so I wonder if it will be a very tight fit. I have 2 tpu bumpers from eBay and it stretch too much with the aluminum back.
Sent from my SGH-T999 using xda app-developers app
DandroidT said:
Have you try this bumper with the brush aluminum back? The brush aluminum back is thicker than stock so I wonder if it will be a very tight fit. I have 2 tpu bumpers from eBay and it stretch too much with the aluminum back.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
if you take a look at the pictures, i have a brushed aluminum back cover which fits perfectly to the bumper case. it has a better fit than most bumpers on ebay, i guarantee you that.
Sent from my GT-I9300 using xda app-developers app
I see it now
Sent from my SGH-T999 using xda app-developers app
Quick question, the white portion of the case, is it hard plastic? Reason I ask is none of the colors look good to me and I'd like to apply a vinyl over it to change the color. Do you think a vinyl would even stick reliably to the white portion?
Thanks for your help ahead of time.
JayGoat said:
Quick question, the white portion of the case, is it hard plastic? Reason I ask is none of the colors look good to me and I'd like to apply a vinyl over it to change the color. Do you think a vinyl would even stick reliably to the white portion?
Thanks for your help ahead of time.
Click to expand...
Click to collapse
yes it is plastic and i think that a vinyl will applied nicely to the case BUT i dont recommend to do so if you have the white s3, because i think that the case is beautiful as it is. its my opinion but its your decision
Related
I'm pretty much a minimalist when it comes to phone cases.
I already have ghost armor film on the front so I just need a bumper that protects the side bezel, just like iPhone 4's. I'd rather not have back cover since I have a white gs2.
Is there anything like that available?
nothing, how about something like this?http://www.ebay.com/itm/Black-TPU-T...405692?pt=PDA_Accessories&hash=item3cc0116ebc
I'm the same, i have the white one with the d3o case. I find myself taking the phone of the case alot because it just flat out interferes with the beauty of phone.. O think what he's looking for is something along the lines of the iphones iband.
Sent from my SGSII using Tapatalk
Yep. Like a bumper for the iphone...been trying to look for one as well..but no luck for me :-(
Sent from my SGH-T989 using XDA App
ugotproblemz said:
Yep. Like a bumper for the iphone...been trying to look for one as well..but no luck for me :-(
Sent from my SGH-T989 using XDA App
Click to expand...
Click to collapse
I'm pretty sure D30 had release them. They had it where you can have the bumpers only, or with the clear back. I saw them while I was inside the T-Mobile store a couple of weeks ago. Not sure if they have it in all the corporate stores.
I'm surprised there is not many option available for t-mobile version gs2... I just ordered white version of elbarto's link though it's not exactly what I was looking for.will post picss once I receive it. thansk everyone
I take that back, it was for the Galaxy S 4G, not the Galaxy S II 4G
The D30 flex protect is the closest thing to a bumper for our phone.
Sent from my Hercules using XDA App
Found some other stuffs on eBay. Looks pretty good but most pics of photochopped.
http://www.ebay.com/itm/220900861863?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
http://www.ebay.com/itm/320819179822?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
http://www.ebay.com/itm/330642841162?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
Clear TPU Case
Have you considered getting a clear TPU case? I also have the white GS2 and I ordered this case right here:
http://www.amazon.com/gp/product/B00620FT76/ref=oh_o02_s00_i00_details
Honestly, I think it looks ****ty on the black model, but I can vouch for it on the white one. It fits snugly on the phone and has power button and volume rocker cutouts. It's nice because it's totally transparent and you can see the white back. If anything, it just makes the phone look more badass.
Michaelearljohansen said:
Have you considered getting a clear TPU case? I also have the white GS2 and I ordered this case right here:
http://www.amazon.com/gp/product/B00620FT76/ref=oh_o02_s00_i00_details
Honestly, I think it looks ****ty on the black model, but I can vouch for it on the white one. It fits snugly on the phone and has power button and volume rocker cutouts. It's nice because it's totally transparent and you can see the white back. If anything, it just makes the phone look more badass.
Click to expand...
Click to collapse
Not taking any chances with this device. TPU cases offer minimal protection against drops, sure its cheap but I'd rather dish out the extra bucks for a reliable case. I have dropped my device many times already from carpet (not much to that I know ) to hardwood floors and the case has kept my device looking like new.
Sent from my SGSII using Tapatalk
iLeopard said:
Not taking any chances with this device. TPU cases offer minimal protection against drops, sure its cheap but I'd rather dish out the extra bucks for a reliable case. I have dropped my device many times already from carpet (not much to that I know ) to hardwood floors and the case has kept my device looking like new.
Sent from my SGSII using Tapatalk
Click to expand...
Click to collapse
Yeah theres no padding in a tpu case. People like the d30 because both the flex protect and defender offer padding and scratch protection.
Sent from my Hercules using XDA App
Just got the case and it looks fairly good. Back cover is frosty transparent so it still shows off white. It does add some bulkyness to it but it's close to what I was looking for: http://goincase.com/products/detail/snap-case-cl59594/2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
By leggysoe at 2012-01-26
By leggysoe at 2012-01-26
leggysoe said:
I'm pretty much a minimalist when it comes to phone cases.
I already have ghost armor film on the front so I just need a bumper that protects the side bezel, just like iPhone 4's. I'd rather not have back cover since I have a white gs2.
Is there anything like that available?
Click to expand...
Click to collapse
If you are minimalist, then you don't need a screen protector for your device. The screen of your device is pretty resistant (Gorilla corning).
For case, I am also looking for one, the thinnest I have seen are the carbon ones. TPU ones are a bit bulky IMO.
barribow said:
If you are minimalist, then you don't need a screen protector for your device. The screen of your device is pretty resistant (Gorilla corning).
For case, I am also looking for one, the thinnest I have seen are the carbon ones. TPU ones are a bit bulky IMO.
Click to expand...
Click to collapse
Carbon ones? As in the skins or is it an actual carbon fiber case?
Sent from my SGH-T989 using XDA App
leggysoe said:
Just got the case and it looks fairly good. Back cover is frosty transparent so it still shows off white. It does add some bulkyness to it but it's close to what I was looking for: http://goincase.com/products/detail/snap-case-cl59594/2
By leggysoe at 2012-01-26
By leggysoe at 2012-01-26
Click to expand...
Click to collapse
Very nice! You hadnt used your piece?
iLeopard said:
Very nice! You hadnt used your piece?
Click to expand...
Click to collapse
Yeah but I was waiting for ghost armor to be installed. I'll visit a kiosk in the mall tomorrow and see if I want to stay with this TPU or get their carbon skins.
leggysoe said:
Yeah but I was waiting for ghost armor to be installed. I'll visit a kiosk in the mall tomorrow and see if I want to stay with this TPU or get their carbon skins.
Click to expand...
Click to collapse
Got this case too. Really liked this case but didnt like the buttons so I cut them out..BIG mistake..now its worse as they are too recessed in. Might pick up another
NogaroS4 said:
Got this case too. Really liked this case but didnt like the buttons so I cut them out..BIG mistake..now its worse as they are too recessed in. Might pick up another
Click to expand...
Click to collapse
Haha, my guess is your finger can't reach all the way down?
I'm still digging my D3O. I've yet to experience big drops (I'm really hoping not though). People complain too much over the buttons saying that they are too hard to press but really they soften over time.
iLeopard said:
Haha, my guess is your finger can't reach all the way down?
I'm still digging my D3O. I've yet to experience big drops (I'm really hoping not though). People complain too much over the buttons saying that they are too hard to press but really they soften over time.
Click to expand...
Click to collapse
Word. Mine are much softer now after a few weeks of use. Cutting them out seems like a mistake... the buttons are protected by the case if dropped.
Sent from my Hercules using XDA App
This is my review of the Otterbox commuter for the S3
Youtube Link
Any feedback is more than welcome
well it looks like it offers pretty good protection but kind of diminishes the beauty of a white S3...
z3nith66 said:
well it looks like it offers pretty good protection but kind of diminishes the beauty of a white S3...
Click to expand...
Click to collapse
Yeah basically, always the way with good protection though
Sent from my GT-I9300 using xda app-developers app
Thanks for the review. Left a comment.
Looks kinda ugly, just going to use it for traveling and such.
Sent from my GT-I9300 using xda premium
I like it, nice review.
Sometimes I just want to use the phone like it was a piece of plastic (without thinking in scratches), so I will get one
Rahabhim said:
I like it, nice review.
Sometimes I just want to use the phone like it was a piece of plastic (without thinking in scratches), so I will get one
Click to expand...
Click to collapse
Thanks
I guess this is the case for you then, unless you want the defender so you can throw it down the stairs and laugh
There are other colors of this case that may look better with the white version.
Here is a pic of the white otterbox commuter
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
website to see all available colors:
http://www.otterbox.com/Samsung-Galaxy-S3-Commuter-Series/77-21092_A,default,pd.html
Otterbox Top Quality
I've owned three Commuter cases (for Samsung Captivate, Infuse, and Note) and you can't beat them for the protection.
The only issues I have had are how the clips are attached to the plate. Twice I've had them break on me, BUT, Otterbox has been very prompt at sending me a FREE replacement. I also have to say that each time I was leaning in such a way that I was putting pressure on the belt clip, so I can't entirely fault the clip. Since they replaced it (promptly), I have no negative feelings.
Although they are a bit pricey, you can definitely see why they do cost more. I would HIGHLY recommend them. They give your phone top-notch protection. :good:
I bought the case today and compared to the case mate tough this provides much more protection however it does the phone slippery due to the hardcover having minimal grip. The biggest gripe I have with this case is the power and volume rockers are really difficult to press and I have contacted otterbox about it and just awaiting reply now.
Sent from my GT-I9300 using xda premium
Anybody using the commuter in a car mount yet ? If so which one, and any chance of a few piccies ?
Also, does the thickness of the case interfere with the NFC at all ?
micromania said:
There are other colors of this case that may look better with the white version.
Here is a pic of the white otterbox commuter
website to see all available colors:
http://www.otterbox.com/Samsung-Galaxy-S3-Commuter-Series/77-21092_A,default,pd.html
Click to expand...
Click to collapse
Yeah I have to agree the white case does look a lot nicer than the black case
blue-bear said:
I bought the case today and compared to the case mate tough this provides much more protection however it does the phone slippery due to the hardcover having minimal grip. The biggest gripe I have with this case is the power and volume rockers are really difficult to press and I have contacted otterbox about it and just awaiting reply now.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I didn't have an issue with the grip of the case but the buttons are a big problem. I did point it out in my review. The trident case is a lot better button wise.
A lot of people have been interested in the differences between the commuter and trident aegis cases so I'm about to film a quick comparison
Oli2k said:
A lot of people have been interested in the differences between the commuter and trident aegis cases so I'm about to film a quick comparison
Click to expand...
Click to collapse
Do a drop test:laugh:
tomer4321765 said:
Do a drop test:laugh:
Click to expand...
Click to collapse
lol If someone wants to send me an s3 I gladly will ;-)
Sent from my GT-I9300 using xda app-developers app
what do u think is better over all
this or Trident Aegis
miahegypt said:
what do u think is better over all
this or Trident Aegis
Click to expand...
Click to collapse
I'd personally go for the trident if it was the same price as the otterbox
Sent from my GT-I9300 using xda app-developers app
great review, I have been searching for a gal s3 specific otterbox review and haven't found any... until now.
That is an issue re the lovely sleek lithe lines of the s3 being covered and ruined by protection, but as has been said, thats the trade off i guess.
I am having a really hard time deciding between a few cases. Bought the invisible skin full body protector (it's my goto scratch protection despite niggles with it) and that will sit beneath any case I buy. May have to take the rear skin off to fit but will cross that bridge...
Fancied a defender but the built in screen protector bothers me as I am worried about it fading and misting over time, where as the commuter does allow for the separate screen skin which then can be removed and replaced independently if required.
Would really like the defender but it is increasingly looking like the commuter will be the best solution :/
I just picked the Aegis off eBay for $26 shipped. Good case so far.
Sent from my GT-I9300 using Tapatalk 2
Just got Email....white Otterbox Commuter case is on back order so i will be waiting another week and half to get mine.
:cyclops:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.ebay.com/itm/28091881666...X:IT&_trksid=p3984.m1497.l2649#ht_2752wt_1396
Man this thing came fast! I ordered it last Thursday night, it arrived today. 2 business days from New York, this seller is on it! Not bad considering I live on the West Coast.
Fit and finish:
When I opened up the package and grabbed the case out of it's blister pack the first thing I noticed was the whole thing was not TPU like I thought it was going to be. The shiny plastic part is a hard plastic and the dull part is silicone. The shiny part isn't so hard that it'll break if you bend it, although I wouldn't try tying it in a knot either, it does have some give to it but it's pretty rigid at the same time. The silicone part is nice cause not only does it provide a lip on the front side of the case allowing you to set the phone face down without damaging it, but it also allows the buttons to be pressed as easily as if nothing was over them. Very nice touch! When looking at the phone from the front you can hardly tell it's even got a case on it, very low profile, very little bulk added. From the back it's much more noticeable due to the way it frames the battery cover, which accentuates my white carbon fiber cover perfectly. The lip it adds to the backside is more significant, I'd guess to ensure you don't mess up your camera/flash/speaker/cover when setting the phone face up.
There is room for improvement though....The cutouts are fairly accurate but the top mic opening is a bit off, it doesn't cover the mic but it's noticeably off centered. You can also see the excess from the mold it was formed in and the transitions from plastic to silicone isn't exactly the smoothest. These are the fine details that can make a good product a great one but it won't be noticed or cared about by most. To be honest, I don't even care about it and i'm very particular, but I like to keep my reviews true and honest.
Once caressed into place, the case fits like a glove and looks very nice. The grip in comparison to the Seidio Surface case is significantly better. This is a minimalists' dream! It protects the corners and edges of the phone, has some screen protection, some camera/battery cover protection, while adding insignificant bulk and allowing you to show off your nice battery cover.
Final thought:
Want drop protection with minimal bulk? This case is for you. It feels good in the hand, adds grip, highlights your battery cover by framing it nicely and when handling the phone without looking at it (putting in or out of your pocket, for example) it gives the feel of a naked phone for the most part. I have finally found a setup i'm 100% happy with, minus the screen protector...but that's going to be changed out for a SPG Ultra Nano Clear as soon as I feel like doing it. The seller is awesome, ships super fast and the product is well worth the cost, which is just $7 shipped. Matter of fact, i'm gonna see if they have any other colors available. Highly recommended!
Here's what my phone looks like with my Carbon fiber battery cover, REALook screen protector and full TPU bumper case
Ugh, i've only had my Incipio DualPro Shine for a week and now see this. That is amazing!
mav3rick478 said:
Ugh, i've only had my Incipio DualPro Shine for a week and now see this. That is amazing!
Click to expand...
Click to collapse
I agree, i'm loving it. It's only $7 shipped
via Galaxy S III
So if you drop your phone with the case with the screen facing the ground will it make contact with the ground? Same for the back facing the ground.
613BulletProof said:
So if you drop your phone with the case with the screen facing the ground will it make contact with the ground? Same for the back facing the ground.
Click to expand...
Click to collapse
No and no.
via Galaxy S III
I ordered this in black. I also have a black carbon fiber battery cover on the way. I can't wait
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
shugga101 said:
I ordered this in black. I also have a black carbon fiber battery cover on the way. I can't wait
Click to expand...
Click to collapse
I think ur gonna love it. It's amazing to me that this $7 case is much grippier than the $30 Seidio Surface. I can rest this thing in my hand, not even squeezing it from the sides, and hold it damn near vertical before it begins to slide down in my hand. And how sleek it is, man i'm really diggin' this setup.
via Galaxy S III
Gadgetz said:
No and no.
via Galaxy S III
Click to expand...
Click to collapse
Thanks, im getting a black one to compliment my pebble blue
I like this as well. Going to order.
Sent from my SCH-I535 using xda app-developers app
A side note question. Where did you get your carbon fiber back plate? All I'm seeing is the i9300 versions. Does this fit our i535? Thanks in advance
Sent from my SCH-I535 using xda app-developers app
613BulletProof said:
Thanks, im getting a black one to compliment my pebble blue
Click to expand...
Click to collapse
YW...I think i'm gonna get a black one too, it'll mask the grime I can sometimes get on my phone when i'm out working on equipment in the field.
k0t0g said:
A side note question. Where did you get your carbon fiber back plate? All I'm seeing is the i9300 versions. Does this fit our i535? Thanks in advance
Click to expand...
Click to collapse
I got it from eBay as well, yes it'll fit perfectly. The only difference between the Intl. version and the US version is internals.
I got my self a pack 2 tone color bumpers 5 for 12 from hong kong with a white carbon fiber back the bumpers are amazing. The fit is small lip on the front and back to keep the screen and camera lense off of surfaces. The button response is flawless, it looks sexy and it fits snug. Im so happy with this purchase
Sent from my SPH-L710 using xda app-developers app
Awesome setup! Could you clarify what you meant by "not TPU" , and yet the product description says TPU? thx
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
GoneFishing36 said:
Awesome setup! Could you clarify what you meant by "not TPU" , and yet the product description says TPU? thx
Click to expand...
Click to collapse
Thanks, I love it. Not sure I can explain it any other way than I already have. I have a TPU case, I can bend and twist that thing however I want and never fear it will break.....cant say the same for this bumper. It's bendable but much more rigid than TPU and certainly feels as if it'll break if bent too much. This isn't a complaint at all as being able to tie my case into a knot is not a prerequisite, its just an observation.
These are the ones i got im currently rocking red.
http://item.mobileweb.ebay.com/viewitem?itemId=330757040275
Sent from my SPH-L710 using xda app-developers app
Matches your setup perfectly....i'm not a fan of Beats headphones myself but other than that, nice setup.
Thanks the beats are my roomates I just used it to take a picture because I could not find my red skull candy headphones.
Sent from my SPH-L710 using xda app-developers app
Nice inexpensive find. I'm waiting for my surface to get here. (paid $20 on amazon) this will be nice for when I want to rock something different. I live in NY so shipping should be instant.
Sent from my SGH-T999 using xda app-developers app
I just finally pulled the trigger on a bumper case and the carbon fiber back. I was mulling over the back for a while and you convinced me to get it. I was also looking for a minimalistic case and this fits my needs perfect.
How do you like the back cover?
tghockey07 said:
I just finally pulled the trigger on a bumper case and the carbon fiber back. I was mulling over the back for a while and you convinced me to get it. I was also looking for a minimalistic case and this fits my needs perfect.
How do you like the back cover?
Click to expand...
Click to collapse
Thanks man....I am very happy with my setup.
At&t didnt have any just the flip case. Does best buy have cases for this device yet?
SysAdmNj said:
At&t didnt have any just the flip case. Does best buy have cases for this device yet?
Click to expand...
Click to collapse
Not at the 3 I went to today..
Mac
Well... I could only hope that Samsung releases some kind of ultra slim cover like the one for the GS3.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
SysAdmNj said:
At&t didnt have any just the flip case. Does best buy have cases for this device yet?
Click to expand...
Click to collapse
Sprint has genuine Samsung flip 36.00
&
BodyGlove tpu. 24.00 < Only sold by Sprint
I highly recommend the BodyGlove case
It provides great protection looks sharp
Cruzerlite on amazon and sprint
Sent from my SGH-T889 using xda premium
Nobody thought of buying a case or at least looking for your 1 before you got the phone?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Purchased the Ringke Slim on ebay. Amazon has them as well.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
05GT said:
Purchased the Ringke Slim on ebay. Amazon has them as well.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
I got this from ebay: http://www.ebay.ca/itm/160907044893...X:IT&_trksid=p3984.m1438.l2649#ht_3659wt_1163
It's pretty cool, the texture feels like fine sand paper which makes it really easy to grip. I recommend this type of case for people with small hands like myself.
05GT said:
Purchased the Ringke Slim on ebay. Amazon has them as well.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
Yeah that's a great case , excellent feel fits well but the exposed bezel at top & bottom worried me a tad.
I picked up a cruzerlite on amazon to hold me over until the real cases come out. Downfall is the cruzerlite doesnt play well with my screen protector
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Unhived__Mind said:
Nobody thought of buying a case or at least looking for your 1 before you got the phone?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Never had to, usually at&t has plenty. They actually blamed it on Hurricane Sandy, said interrupted deliveries.
I got a cheap one for 7 off ebay & ordered the Samsung White Note 2 case from mobilecityonline.com for $19.99. I'm going to not go case crazy like I did on the SGS3.
i don't normally get a case since i usually hate most that ive had, but i actually love the samsung tpu case. it is super thin, good coverage, rubber sides, plastic back that resembles what the phone looks like underneath, and lip that goes over the screen. you can get it 50% off on samsungs website with the coupon code, so $15. totally worth it.
50% off code: rE155266e
black tpu: http://www.samsung.com/us/mobile/cell-phones-accessories/EFC-1J9BBEGSTA
white tpu: http://www.samsung.com/us/mobile/cell-phones-accessories/EFC-1J9BWEGSTA
Scythe024 said:
i don't normally get a case since i usually hate most that ive had, but i actually love the samsung tpu case. it is super thin, good coverage, rubber sides, plastic back that resembles what the phone looks like underneath, and lip that goes over the screen. you can get it 50% off on samsungs website with the coupon code, so $15. totally worth it.
50% off code: rE155266e
black tpu: http://www.samsung.com/us/mobile/cell-phones-accessories/EFC-1J9BBEGSTA
white tpu: http://www.samsung.com/us/mobile/cell-phones-accessories/EFC-1J9BWEGSTA
Click to expand...
Click to collapse
Is it rubber skin thin? I mean, I dont want to bulk this device up at all but I want a really thin case.
SysAdmNj said:
Is it rubber skin thin? I mean, I dont want to bulk this device up at all but I want a really thin case.
Click to expand...
Click to collapse
its thin enough that you may mistake it for there being no case on there at all, just like the samsung tpu cases for the GS3. heres a thread with lots of pix and review for it http://forum.xda-developers.com/showthread.php?t=1970161
Scythe024 said:
its thin enough that you may mistake it for there being no case on there at all, just like the samsung tpu cases for the GS3. heres a thread with lots of pix and review for it http://forum.xda-developers.com/showthread.php?t=1970161
Click to expand...
Click to collapse
Thanks, I might just order this if I dont find another thin one or as an alternate.
Unhived__Mind said:
Nobody thought of buying a case or at least looking for your 1 before you got the phone?
Click to expand...
Click to collapse
This is why I always wait a bit to purchase my electronics. It makes everything easier to have a bit of patience.
Why does everyone dislike the flip cover case? It seems like decent protection and not bulky at all?
SysAdmNj said:
Why does everyone dislike the flip cover case? It seems like decent protection and not bulky at all?
Click to expand...
Click to collapse
I can't speak for everyone but I know a disadvantage is that it blocks the notification light, making it useless to have.
ap3604 said:
I can't speak for everyone but I know a disadvantage is that it blocks the notification light, making it useless to have.
Click to expand...
Click to collapse
This may be a solution. Who is willing to try
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Seriously, I might give it a go. As long as you can leave the flip cover folded over the back of the device for the times you want to be able to see the led notification then I should be fine. But I dont plan on getting a screen protector and for throwing it in my pockets or laptop bag the flip cover might do its job in protecting the big screen.
Hey guys, there's so many cases on the market, I really can't decide on what to buy. I'm looking for a few, definite things that I must have, however :
Must be as thin as possible
Easy installation (no glue spraying or wetting, etc)
Must come in either black or silver
If someone can point me in the right direction, I'd really appreciate it! Thanks.
After trying incipio, greatshield, diztronic, and Nilkin, IMO Nilkin is the best slim case and thats the one I kept finally.
Sent from my HTC One using xda premium
nerv8765 said:
Hey guys, there's so many cases on the market, I really can't decide on what to buy. I'm looking for a few, definite things that I must have, however :
Must be as thin as possible
Easy installation (no glue spraying or wetting, etc)
Must come in either black or silver
If someone can point me in the right direction, I'd really appreciate it! Thanks.
Click to expand...
Click to collapse
I have the Bear Motion, the Poetic Palette and the the Cima Carbon Fiber hard case. I like the looks of the Cima, but the protection of the Poetic.
nerv8765 said:
Easy installation (no glue spraying or wetting, etc)
Click to expand...
Click to collapse
I did not know there was such a thing as a case that requires glue or wetting Screen protectors yes, but what kind of case needs this?!?
I have a Baseus translucent case. While it looks great because the top and bottom are exposed, I dropped my phone and guess where the impact was?
deeevan said:
I did not know there was such a thing as a case that requires glue or wetting Screen protectors yes, but what kind of case needs this?!?
I have a Baseus translucent case. While it looks great because the top and bottom are exposed, I dropped my phone and guess where the impact was?
Click to expand...
Click to collapse
Neither did I but I guess some of the ones like Ghost Armor require some sort of adhesive and knowing me, I'd totally screw that up and bork my phone.
Anyway, I ended up going with the Poetic Atmosphere case, I hope it's as good as it looks, and it does have very good reviews, so I hope it was worth the price. But it wasn't that much anyway, if I don't like it I will probably just trade it.
Rock has a good line of super thin cases. I'm using a black one and it looks outstanding on the black phone. Only thing is, since it is so thin, it is more of a scratch guard than a drop guard. Aside from that, I can't recommend it enough.
Sent from my HTC One using xda app-developers app
I'm currently using the Incipio Feather. It's pretty thin and fits the HTC One well, but the only problem I have is that the volume buttons are a bit inaccessible if you are pressing the buttons with your right index finger.
SPIGEN?????
Sent from my SCH-I535 using xda premium
I love my incipio feather shine. Just make sure you get the one with the revised cutouts. The regular feather is not an issue. But the shine had a 1st gen style without a proper cutout for power cord. Revised version has power cord cutout and SIM tray cutout added to it. I'm sending mine back tomorrow for the revised version. Already have an rma for it. Case is amazing though. Incredible look and feel. I've had about 5 people ask me. "are you going to get a case for it ?" Then I tell them.. umm.. that IS the case. and upon closer look they see that it does intact have a case and it is not part of the phone.
Sent from my HTC One using Tapatalk 2
deeevan said:
I did not know there was such a thing as a case that requires glue or wetting Screen protectors yes, but what kind of case needs this?!?
I have a Baseus translucent case. While it looks great because the top and bottom are exposed, I dropped my phone and guess where the impact was?
Click to expand...
Click to collapse
There are quite a few people that consider things like ghost armor, zagg invisishield, and skinomi full phone protection as a sort of case. I believe this is what the Op meant.
Sent from my HTC One using xda premium
---------- Post added at 10:44 PM ---------- Previous post was at 10:43 PM ----------
nerv8765 said:
Neither did I but I guess some of the ones like Ghost Armor require some sort of adhesive and knowing me, I'd totally screw that up and bork my phone.
Anyway, I ended up going with the Poetic Atmosphere case, I hope it's as good as it looks, and it does have very good reviews, so I hope it was worth the price. But it wasn't that much anyway, if I don't like it I will probably just trade it.
Click to expand...
Click to collapse
+1 for the atmosphere fro poetic. It's awesome and thinner than it looks in the pictures online.
Sent from my HTC One using xda premium
clninja said:
I love my incipio feather shine. Just make sure you get the one with the revised cutouts. The regular feather is not an issue. But the shine had a 1st gen style without a proper cutout for power cord. Revised version has power cord cutout and SIM tray cutout added to it. I'm sending mine back tomorrow for the revised version. Already have an rma for it. Case is amazing though. Incredible look and feel. I've had about 5 people ask me. "are you going to get a case for it ?" Then I tell them.. umm.. that IS the case. and upon closer look they see that it does intact have a case and it is not part of the phone.
Sent from my HTC One using Tapatalk 2
Click to expand...
Click to collapse
Are the revised cutouts in reference to the partially blocked access to the volume buttons?
mehdi_s82 said:
After trying incipio, greatshield, diztronic, and Nilkin, IMO Nilkin is the best slim case and thats the one I kept finally.
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
I agree the nilliken is probably the best thin case i've ever used. Comes with a decent screen protector too.
I really cant wait till june for one of these new aluminum bumpers from devilcase. never used one but i think it fits all of my needs. Should protect much better than a slim..
https://www.facebook.com/pages/Devi...per-Series/448520031891616?hc_location=stream
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
nugzo said:
I agree the nilliken is probably the best thin case i've ever used. Comes with a decent screen protector too.
I really cant wait till june for one of these new aluminum bumpers from devilcase. never used one but i think it fits all of my needs. Should protect much better than a slim..
https://www.facebook.com/pages/Devi...per-Series/448520031891616?hc_location=stream
Click to expand...
Click to collapse
Just ordered a Nillkin from eBay but the Devilcase looks neat. Does it protect the back too?
mehdi_s82 said:
After trying incipio, greatshield, diztronic, and Nilkin, IMO Nilkin is the best slim case and thats the one I kept finally.
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
Oakenhold said:
Just ordered a Nillkin from eBay but the Devilcase looks neat. Does it protect the back too?
Click to expand...
Click to collapse
dont know for sure but i think it'll be close. because of the way this phone appears to curve is why im unsure. I actually have a clear zagg on the back of mine though and that turned out great. The front zagg didnt make it but the back has been on since launch, cant tell its there. Ask me again in june if you're interested
Another thing i'm unsure about is if the aluminum will affect the radios. HTC made the sides with plastic because of reception. The aluminum bumpers will cover that.
this case fits great. I use it over my spigen clear.http://www.ebay.com/itm/Clear-Ultra...t=US_Cell_Phone_PDA_Cases&hash=item41726f2a24
Must say i love the Poetic FlipBook Case.
Poetic Atmosphere Case or Cimo Grip Back Case Flexible TPU Cover?
Or would anyone else care to recommend a clear, slim case for the HTC One.
OtterBox +1
mehdi_s82 said:
After trying incipio, greatshield, diztronic, and Nilkin, IMO Nilkin is the best slim case and thats the one I kept finally.
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
OtterBox is good.
Recommend it for you.
I already posted about this case, but I didn't include any pictures, so I'll do it now. This is the Rock Ethereal that I use. I bought the black one, and it looks so damn good on the black. It's as super slim as they come.
http://www.rockphone.cn/en/Html/Product/517.html
Sent from my HTC One using xda app-developers app
ataft said:
I already posted about this case, but I didn't include any pictures, so I'll do it now. This is the Rock Ethereal that I use. I bought the black one, and it looks so damn good on the black. It's as super slim as they come.
http://www.rockphone.cn/en/Html/Product/517.html
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Where do I buy this?