Develop Bugs

cheap TPU case recommended

I ordered a cheap TPU material case from amazon for something like $7 shipped and its an amazing deal. It's a smoke colored diamond pattern and i chose it because i wanted something easier to slide out of my pocket than the regular cheap rubber silicone cases that get lint all over them and i didn't want to pay a lot of money. I also didn't want a snap on cheap plastic one that might scratch my phone so this seemed like a good choice.
Sent from my ADR6400L using XDA App

I have grown fond of the tpu cases, especially the argyle pattern and it works well as regard to no lint and being non-sticky. I usually buy it for all my gadgets..xoom, Ipad, and thunderbolt.
Sent from my Xoom

copualt3 said:
I have grown fond of the tpu cases, especially the argyle pattern and it works well as regard to no lint and being non-sticky. I usually buy it for all my gadgets..xoom, Ipad, and thunderbolt.
Sent from my Xoom
Click to expand...
Click to collapse
cool, thanks for the reply! im excited to try it. along with a cheap screen protector for a total of under $10 shipped, it seems like a good solution on a budget.
Sent from my ADR6400L using XDA App

wrb123 said:
I ordered a cheap TPU material case from amazon for something like $7 shipped and will let everyone know how it is when it arrives. It's a smoke colored diamond pattern and i chose it because i wanted something easier to slide out of my pocket than the regular cheap rubber cases that get lint all over them and i didn't want to pay a lot of money. I also didn't want a snap on cheap plastic one that might scratch my phone so this seemed like a good choice.
Has anyone had experience with these cases? Can you get them out of your pocket easily without your pocket gripping it and such?
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
I got mine off eBay for 4 bucks. I didn't want a glossy finish, nor the argyle pattern, so mine is a matte dark gray/black finish. It should feel better in the hand.

asianrage said:
I got mine off eBay for 4 bucks. I didn't want a glossy finish, nor the argyle pattern, so mine is a matte dark gray/black finish. It should feel better in the hand.
Click to expand...
Click to collapse
yet yours is still tpu material and not silicone/rubber? i didn't like that type, because it always pulled my pocket inside out.
Sent from my ADR6400L using XDA App

Had it on my Captivate, my DroidX, and now my Bolt
Liked it then, still like it now
Looks pretty good in person
Fits perfectly
Doesn't add too much bulk
And makes me not scared to put it down somewhere and think it is going to get scratched

drewfinkel said:
Had it on my Captivate, my DroidX, and now my Bolt
Liked it then, still like it now
Looks pretty good in person
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
nice. thanks for the pictures. looks like ill have to put the screen protector on first, hopefully removing and replacing the case doesn't make the protector start to lift on the edges.
Sent from my ADR6400L using XDA App

wrb123 said:
nice. thanks for the pictures. looks like ill have to put the screen protector on first, hopefully removing and replacing the case doesn't make the protector start to lift on the edges.
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
I put the screen protector on and gave it about a day and a half, 2 days before i put the case on (the put the case on carefully)
the case sits just a but on top of the screen protector, so far, it hasnt lifted, but whatever, lifetime zagg warranty

mine arrived in the mail, smoke grey colored argyle diamond pattern just like the pics posted. easy to slip on and off but would never fall off. MUCH better than the rubber silicone material yet still nice and smooth and almost rubber or gel feeling. slips in and out of a pocket easily yet feels a little better in the hand, it sort of grips slightly better than the actual phone surface, so better one handed use. very happy for under $10 shipped!
Sent from my ADR6400L using XDA App

Degasis dot net has these as well

I got this off of eBay, $10 really nice I think
http://cgi.ebay.com/ws/eBayISAPI.dl...04355&ssPageName=STRK:MEWNX:IT#ht_2862wt_1139

Is that hard clear or tpu?
I'm using the Verizon tpu case now.
Sent from my ADR6400L using Tapatalk

I'm really digging that argyle look to the back of it. Makes me wish I hadn't just picked a case off the wall while @ VZW

Wow...there's literally 4,000 listings for cases. There were like 3 for my Fascinate.

Jodiuh said:
Is that hard clear or tpu?
I'm using the Verizon tpu case now.
Sent from my ADR6400L using Tapatalk
Click to expand...
Click to collapse
"The HTC THUNDERBOLT (VERIZON) CLEAR/BLACK HARD CANDY CASE is a new case made out of a combination of PC material and TPU."
Fits really nice, and makes it look good, got my screen protector in yesterday also, got to put that on.

drewfinkel said:
Had it on my Captivate, my DroidX, and now my Bolt
Liked it then, still like it now
Looks pretty good in person
Fits perfectly
Doesn't add too much bulk
And makes me not scared to put it down somewhere and think it is going to get scratched
Click to expand...
Click to collapse
Nice! Looks good and it's cheap, I'll have to pick one of these up.

It really is the perfect middle ground between hard plastic and silicone skin. Everyone should get one!
Sent from my ADR6400L using XDA App

which brand would you recommend? Theres...a lot of them when I search on amazon. Though I guess at $10 and under it's worth a shot trying and seeing what I find.

g00s3y said:
I got this off of eBay, $10 really nice I think
http://cgi.ebay.com/ws/eBayISAPI.dl...04355&ssPageName=STRK:MEWNX:IT#ht_2862wt_1139
Click to expand...
Click to collapse
I really like this one... What brand is this one?

Russ36363 said:
which brand would you recommend? Theres...a lot of them when I search on amazon. Though I guess at $10 and under it's worth a shot trying and seeing what I find.
Click to expand...
Click to collapse
pretty sure all the argyle pattern ones are the same brand. got mine from eforcity retailer on amazon and it arrived in like 4 days from california to chicago.
Sent from my ADR6400L using XDA App

Looking for a new case(Currently have smoke TPU)

So, I bought the smoked colored TPU case because matte black was sold out. I like the case because it's small and doesn't add more bulk to an already huge phone.
My problem is that it's very slippery, I'd like something a bit more grippy but do not want the full rubber cases, I had a case mate on my old phone and I sometimes it was a pain to take out and put in my pocket, it would just come off of the phone..
The matte black TPU I heard was good, but will it be as slippery as the one I have now.
This seems to have decent reviews:
http://www.amazon.com/S-Line-Shell-Samsung-Galaxy-Sprint/dp/B005U30660/ref=pd_cp_cps_1

jmejiaa said:
So, I bought the smoked colored TPU case because matte black was sold out. I like the case because it's small and doesn't add more bulk to an already huge phone.
My problem is that it's very slippery, I'd like something a bit more grippy but do not want the full rubber cases, I had a case mate on my old phone and I sometimes it was a pain to take out and put in my pocket, it would just come off of the phone..
The matte black TPU I heard was good, but will it be as slippery as the one I have now.
This seems to have decent reviews:
http://www.amazon.com/S-Line-Shell-Samsung-Galaxy-Sprint/dp/B005U30660/ref=pd_cp_cps_1
Click to expand...
Click to collapse
Thats the case that i use every day and love it. It has the right amount for grip that you will be looking for i was also using a TPC case and did not like it all for the same resone you said. now that said the only problem i have is the head phone cut out it a little to small and i have to take the case off to us the head phones but to me thats no big deal but for that price you cant go wrong. i would say buy it check this out it was posted in a different thead same case but from ebay http://www.ebay.com/itm/BLACK-S-LIN...Accessories&hash=item45ff211461#ht_1507wt_972

ewalk4866 said:
Thats the case that i use every day and love it. It has the right amount for grip that you will be looking for i was also using a TPC case and did not like it all for the same resone you said. now that said the only problem i have is the head phone cut out it a little to small and i have to take the case off to us the head phones but to me thats no big deal but for that price you cant go wrong. i would say buy it check this out it was posted in a different thead same case but from ebay http://www.ebay.com/itm/BLACK-S-LIN...Accessories&hash=item45ff211461#ht_1507wt_972
Click to expand...
Click to collapse
Thanks, but the jack info is a deal breaker. I use my phone every time I get in my car with the Aux input. It's my source of music, taking the case on and off every single time would be a big hassle.
If I don't get more replies I'll take my chances with the matte black TPU.

jmejiaa said:
Thanks, but the jack info is a deal breaker. I use my phone every time I get in my car with the Aux input. It's my source of music, taking the case on and off every single time would be a big hassle.
If I don't get more replies I'll take my chances with the matte black TPU.
Click to expand...
Click to collapse
Simply buy a headphone Jack that's built for cases. Like this ...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Jess813 said:
Simply buy a headphone Jack that's built for cases. Like this ...
Click to expand...
Click to collapse
Thanks didn't know they made that I will oder one
Sent from my SPH-D710 using xda premium

There is a really grippy nice black tpu case i got off ebay. Ill see if i can find a link.
Sent from my Samsung Galaxy S2

Http://www.ebay.com/itm/BLACK-GEL-T...SPRINT-SAMSUNG-EPIC-4G-TOUCH-GM-/260936315305
Sent from my Samsung Galaxy S2

I have a lot of cases and have to say overall the best one you can buy for this phone is the Case-Mate Tough.
Transmission sent from a Galaxy S II with XDA Premium

Pheno.menon said:
I have a lot of cases and have to say overall the best one you can buy for this phone is the Case-Mate Tough.
Transmission sent from a Galaxy S II with XDA Premium
Click to expand...
Click to collapse
Same here I love my tough case for this phone
Sent from my SPH-D710 using xda premium

Check out FlyGrip. Won't have to worry about "slippery" cases.
http://flygrip.com/
Sent from my E4GT using xda premium

Pshhh ill sell you my black TPU for $.50 plus whatever shipping is to your address... Its got nice texture on the sides to grip onto haha.
I like the one someone posted on here on amazon. White silicone for $.01. Best case ever lol. But i have also never, not a single time, dropped my phone. So Im just talking strictly feel and looks
Sent from my SPH-D710 using XDA App

Just got a white casemate PoP case, and love it!
Sent from my Black Iced miui SPH-D710

mkuehn10 said:
Check out FlyGrip. Won't have to worry about "slippery" cases.
http://flygrip.com/
Sent from my E4GT using xda premium
Click to expand...
Click to collapse
Just looked it up, no thanks..

trident aegis case is money followed by casemate tough case . in between those two cant go wrong

This is the next one I'm getting, thought I'd share it. They have other colors as well.

Bumper-like cases for side protection?

I'm pretty much a minimalist when it comes to phone cases.
I already have ghost armor film on the front so I just need a bumper that protects the side bezel, just like iPhone 4's. I'd rather not have back cover since I have a white gs2.
Is there anything like that available?

nothing, how about something like this?http://www.ebay.com/itm/Black-TPU-T...405692?pt=PDA_Accessories&hash=item3cc0116ebc

I'm the same, i have the white one with the d3o case. I find myself taking the phone of the case alot because it just flat out interferes with the beauty of phone.. O think what he's looking for is something along the lines of the iphones iband.
Sent from my SGSII using Tapatalk

Yep. Like a bumper for the iphone...been trying to look for one as well..but no luck for me :-(
Sent from my SGH-T989 using XDA App

ugotproblemz said:
Yep. Like a bumper for the iphone...been trying to look for one as well..but no luck for me :-(
Sent from my SGH-T989 using XDA App
Click to expand...
Click to collapse
I'm pretty sure D30 had release them. They had it where you can have the bumpers only, or with the clear back. I saw them while I was inside the T-Mobile store a couple of weeks ago. Not sure if they have it in all the corporate stores.

I'm surprised there is not many option available for t-mobile version gs2... I just ordered white version of elbarto's link though it's not exactly what I was looking for.will post picss once I receive it. thansk everyone

I take that back, it was for the Galaxy S 4G, not the Galaxy S II 4G

The D30 flex protect is the closest thing to a bumper for our phone.
Sent from my Hercules using XDA App

Found some other stuffs on eBay. Looks pretty good but most pics of photochopped.
http://www.ebay.com/itm/220900861863?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
http://www.ebay.com/itm/320819179822?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
http://www.ebay.com/itm/330642841162?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

Clear TPU Case
Have you considered getting a clear TPU case? I also have the white GS2 and I ordered this case right here:
http://www.amazon.com/gp/product/B00620FT76/ref=oh_o02_s00_i00_details
Honestly, I think it looks ****ty on the black model, but I can vouch for it on the white one. It fits snugly on the phone and has power button and volume rocker cutouts. It's nice because it's totally transparent and you can see the white back. If anything, it just makes the phone look more badass.

Michaelearljohansen said:
Have you considered getting a clear TPU case? I also have the white GS2 and I ordered this case right here:
http://www.amazon.com/gp/product/B00620FT76/ref=oh_o02_s00_i00_details
Honestly, I think it looks ****ty on the black model, but I can vouch for it on the white one. It fits snugly on the phone and has power button and volume rocker cutouts. It's nice because it's totally transparent and you can see the white back. If anything, it just makes the phone look more badass.
Click to expand...
Click to collapse
Not taking any chances with this device. TPU cases offer minimal protection against drops, sure its cheap but I'd rather dish out the extra bucks for a reliable case. I have dropped my device many times already from carpet (not much to that I know ) to hardwood floors and the case has kept my device looking like new.
Sent from my SGSII using Tapatalk

iLeopard said:
Not taking any chances with this device. TPU cases offer minimal protection against drops, sure its cheap but I'd rather dish out the extra bucks for a reliable case. I have dropped my device many times already from carpet (not much to that I know ) to hardwood floors and the case has kept my device looking like new.
Sent from my SGSII using Tapatalk
Click to expand...
Click to collapse
Yeah theres no padding in a tpu case. People like the d30 because both the flex protect and defender offer padding and scratch protection.
Sent from my Hercules using XDA App

Just got the case and it looks fairly good. Back cover is frosty transparent so it still shows off white. It does add some bulkyness to it but it's close to what I was looking for: http://goincase.com/products/detail/snap-case-cl59594/2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
By leggysoe at 2012-01-26
By leggysoe at 2012-01-26

leggysoe said:
I'm pretty much a minimalist when it comes to phone cases.
I already have ghost armor film on the front so I just need a bumper that protects the side bezel, just like iPhone 4's. I'd rather not have back cover since I have a white gs2.
Is there anything like that available?
Click to expand...
Click to collapse
If you are minimalist, then you don't need a screen protector for your device. The screen of your device is pretty resistant (Gorilla corning).
For case, I am also looking for one, the thinnest I have seen are the carbon ones. TPU ones are a bit bulky IMO.

barribow said:
If you are minimalist, then you don't need a screen protector for your device. The screen of your device is pretty resistant (Gorilla corning).
For case, I am also looking for one, the thinnest I have seen are the carbon ones. TPU ones are a bit bulky IMO.
Click to expand...
Click to collapse
Carbon ones? As in the skins or is it an actual carbon fiber case?
Sent from my SGH-T989 using XDA App

leggysoe said:
Just got the case and it looks fairly good. Back cover is frosty transparent so it still shows off white. It does add some bulkyness to it but it's close to what I was looking for: http://goincase.com/products/detail/snap-case-cl59594/2
By leggysoe at 2012-01-26
By leggysoe at 2012-01-26
Click to expand...
Click to collapse
Very nice! You hadnt used your piece?

iLeopard said:
Very nice! You hadnt used your piece?
Click to expand...
Click to collapse
Yeah but I was waiting for ghost armor to be installed. I'll visit a kiosk in the mall tomorrow and see if I want to stay with this TPU or get their carbon skins.

leggysoe said:
Yeah but I was waiting for ghost armor to be installed. I'll visit a kiosk in the mall tomorrow and see if I want to stay with this TPU or get their carbon skins.
Click to expand...
Click to collapse
Got this case too. Really liked this case but didnt like the buttons so I cut them out..BIG mistake..now its worse as they are too recessed in. Might pick up another

NogaroS4 said:
Got this case too. Really liked this case but didnt like the buttons so I cut them out..BIG mistake..now its worse as they are too recessed in. Might pick up another
Click to expand...
Click to collapse
Haha, my guess is your finger can't reach all the way down?
I'm still digging my D3O. I've yet to experience big drops (I'm really hoping not though). People complain too much over the buttons saying that they are too hard to press but really they soften over time.

iLeopard said:
Haha, my guess is your finger can't reach all the way down?
I'm still digging my D3O. I've yet to experience big drops (I'm really hoping not though). People complain too much over the buttons saying that they are too hard to press but really they soften over time.
Click to expand...
Click to collapse
Word. Mine are much softer now after a few weeks of use. Cutting them out seems like a mistake... the buttons are protected by the case if dropped.
Sent from my Hercules using XDA App

Case-Mate POP! CASE W/ STAND for Samsung Galaxy S3

I'm thinking of ordering this case...anyone else?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

That looks nice, Id get that if it was in black.

Yes!!!
I had the same case for the s2
Where can you buy it?? And how much
Edit: I just ordered it
sent from my GALAXY SIII

I just went by an AT&T store and bought the Case-Mate cover. I also bought a TPU by BodyGlove. I have a BodyGlove on my Captivate and it's a great. I also bought an iVisor AG screen protector.

Heres pics and i wrote a little review in this thread
http://forum.xda-developers.com/showthread.php?t=1726785
Case mate pop case and visor ag screen protector
Sent from my YP-G70 using XDA

manny05 said:
Yes!!!
I had the same case for the s2
Where can you buy it?? And how much
Edit: I just ordered it
sent from my GALAXY SIII
Click to expand...
Click to collapse
Where did u buy it from?
I looked on case-mate's site and they have it for 35. I found a 20% off coupon which brought it down to 28 with free shipping.
Bmoreboy how much was it thru att store?

I think the only store with it in stock is at&t lucky for us all these phones are the same
Sent from my SPH-L710 using XDA

bmoreboy02 said:
I think the only store with it in stock is at&t lucky for us all these phones are the same
Sent from my SPH-L710 using XDA
Click to expand...
Click to collapse
How much?
EDIT: Nevermind...i just saw your other post and checked on ATT website...i just ordered it from case-mate/amazon for $28. Now the question is which will come first...case or phone lol

send2amrish said:
Where did u buy it from?
I looked on case-mate's site and they have it for 35. I found a 20% off coupon which brought it down to 28 with free shipping.
Bmoreboy how much was it thru att store?
Click to expand...
Click to collapse
I checked the url on those images he posted. I got it for $35. Exactly the same price I bought it for the gs2
sent from my GALAXY SIII

manny05 said:
I checked the url on those images he posted. I got it for $35. Exactly the same price I bought it for the gs2
sent from my GALAXY SIII
Click to expand...
Click to collapse
so that means you ordered from case-mate.com like myself...you should've searched google for a promo code...i used "TOUGH" to get 20% off to get the case for 28

bmoreboy02 said:
Heres pics and i wrote a little review in this thread
http://forum.xda-developers.com/showthread.php?t=1726785
Case mate pop case and visor ag screen protector
Sent from my YP-G70 using XDA
Click to expand...
Click to collapse
What kind of material is touching the phone? Is it the black color one? Is the black much softer (like silicone) Does the white hard material ever touch the phone? Reason I ask is I've found the hard plastic cases will scratch a phone if a little dust gets in there but if they have a soft lining of silicone it's OK.

Forgetfull said:
What kind of material is touching the phone? Is it the black color one? Is the black much softer (like silicone) Does the white hard material ever touch the phone? Reason I ask is I've found the hard plastic cases will scratch a phone if a little dust gets in there but if they have a soft lining of silicone it's OK.
Click to expand...
Click to collapse
It fitd like an otterbox commuter. The phone is wrapped in the grey rubber then you put the white plastic on. The plastic never touches the phone
Sent from my SPH-L710 using XDA

bmoreboy02 said:
It fitd like an otterbox commuter. The phone is wrapped in the grey rubber then you put the white plastic on. The plastic never touches the phone
Sent from my SPH-L710 using XDA
Click to expand...
Click to collapse
I remember a problem on the old casemates was the rubber part that extends up the sides would go floppy and start to pull away from the phone (since it has no real support to keep it tight). Did they fix that? Do you have/know of a pic of the inside of the case without the phone? I didn't see one in your other thread.
thanks

Ill have to take it off when i get a chance but it fits very nice. I think the fact all the carries will have the same phone size wise is gona help out alot
Sent from my SPH-L710 using XDA

Forgetfull said:
I remember a problem on the old casemates was the rubber part that extends up the sides would go floppy and start to pull away from the phone (since it has no real support to keep it tight). Did they fix that? Do you have/know of a pic of the inside of the case without the phone? I didn't see one in your other thread.
thanks
Click to expand...
Click to collapse
I have that same issue with the one I purchased for my Skyrocket.

great looking case thanks for the code
Just ordered the case the "tough" code worked saved me 7 bucks!

Where to buy this case in Canada? Most likely because it's Case-Mate it'll be almost everywhere after Galaxy release up here.

Kevbodian said:
Where to buy this case in Canada? Most likely because it's Case-Mate it'll be almost everywhere after Galaxy release up here.
Click to expand...
Click to collapse
Good question. I'm hunting for cases this weekend, and this is at the top of my list. I'll post here if I see the POP! anywhere.

I've had mine for a few days now. The case itself is great, but the kickstand is basically flimsy plastic and I'm very unimpressed with it. Given that the kickstand was the primary reason for my getting it, I expect to switch to the Seidio Active case when it is available, given that it will have a metal kickstand. I can't emphasize enough how flimsy the Pop! kickstand feels.

this is the top of my list also followed by otterbox commuter.

Case with Kickstand Recommendations?

As someone who used the kickstand on my Evo OG a lot, I must have a case that includes a kickstand. Does anyone have any particular recommendations? I have used Seidio car mounts in the past, and they were very high quality and durable, but a bit on the heavy side (trade-off for durable I guess).
Anyway, I see two cases I'm interested in.
Case-Mate Pop! with Kickstand. ~$35
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Seidio's planned Surface case with Kickstand ~$35
Any other recs?

i personally just bought the pop at the att store near me and its really nice.

drksilenc said:
i personally just bought the pop at the att store near me and its really nice.
Click to expand...
Click to collapse
Oh man, I am so used to ordering everything from Amazon (or others) that I didn't even consider going to a store to get a case. I guess I was thinking that since the stores don't have the phones yet, they wouldn't have the accessories. Stupid thought process on my part. I'll have to go to a local store and see if I can find the case-mate.

call first dont waste the gas

FLYGRIP BY FAR!!!! Best accessory I've EVER bought by FAR
Finger grip and kickstand
GET IT NOW
Flygrip.com
... :3
Sent from my SPH-D700 using xda premium

I'm waiting on the blue Seidio Active with kick. The black is available for preorder now, so hopefully it won't be long. Good to know there's the Case-Mate, too.

Jbluna said:
FLYGRIP BY FAR!!!! Best accessory I've EVER bought by FAR
Finger grip and kickstand
GET IT NOW
Flygrip.com
... :3
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
Holy crap, that's ugly, bulky and won't protect my screen when I put my phone face down.
I ordered a case-mate Pop! (black) for now, but I'll probably get a Seidio blue when they finally get them made. I wish they'd hurry up with the car mount. I need my Waze GPS.

Sleestax said:
Holy crap, that's ugly, bulky and won't protect my screen when I put my phone face down.
Click to expand...
Click to collapse
How is it bulky? Its like 2 inches long and one inch wide. And doesn't add much thickness to the phone at all. When your fingers are in it, you won't worry about dropping it at all. I can easily reach all 4 corners of my screen with this baby. watch Qbkings review of it
Sent from my SPH-D700 using xda premium

I got the case mate with the kickstand and I love it.
sent from my GALAXY SIII

I bought this one cheapo, but hey..
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

cashyftw said:
I bought this one cheapo, but hey..
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
Got the same one...decent!

Jbluna said:
How is it bulky? Its like 2 inches long and one inch wide. And doesn't add much thickness to the phone at all. When your fingers are in it, you won't worry about dropping it at all. I can easily reach all 4 corners of my screen with this baby. watch Qbkings review of it
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
The Flygrip is pretty awesome. I just put it on my Body Glove case today.

aren't you guys worried about the flygrip coming unstuck and you droping your phone as a result?

ronin4740 said:
aren't you guys worried about the flygrip coming unstuck and you droping your phone as a result?
Click to expand...
Click to collapse
I had it on my epic touch for a few weeks (before I quickly got rid of it) and it never felt like it was getting loose. It uses the 3m double sided tape, the same tape on the wall hooks that 3m makes that are rated to hold 5 lbs.
Another thing I like is that it lifts the phone speaker of the surface more so it doesn't dampen the ringer. That is partially annoying cause it doesn't lay flat on a surface if your using your phone laying down, but isn't a huge deal.

Sleestax said:
As someone who used the kickstand on my Evo OG a lot, I must have a case that includes a kickstand. Does anyone have any particular recommendations? I have used Seidio car mounts in the past, and they were very high quality and durable, but a bit on the heavy side (trade-off for durable I guess).
Anyway, I see two cases I'm interested in.
Case-Mate Pop! with Kickstand. ~$35
Seidio's planned Surface case with Kickstand ~$35
Any other recs?
Click to expand...
Click to collapse
If you order the case mate thru the case mate website use the "tough" code for 20% off. I have the case already just waiting on the phone. Case looks sturdy and should be great.

I would say this http://www.youtube.com/watch?v=NHEzogJcXfE
but theyre not shipping until July. It looks neat

cashyftw said:
I bought this one cheapo, but hey..
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
jiggytom said:
Got the same one...decent!
Click to expand...
Click to collapse
How do you guys like that one? I saw it on ebay and really considered it. Does the case fit on the phone well?

Anymode's Samsung Galaxy SIII Mesh case

Hands down the original nilllkin case. I want to get this but couldn't found it anywhere for under 20 bucks and was all from far east. I end up getting the rock.
I didn't want to get the fake ones either.
http://www.nillkin.com/En/ProductView.asp?ID=2729

Guys, looking for something below with kickstand. I see some good options in this thread but they all make the phone pretty thick.
So far, I have been using
for my captivate