ok so this may sound strange but my phone will not boot up. i have tried flashing different roms and always their boot images via fastboot right after i instal the rom. Right now my device boots up and shows the splash screen and then imediately boots into bootloader mode. i got to this problem by restoring a previous backup and then flashing its boot.img. can anyone help me or tell me whats going on?! it would be much appreciated!!! right now im out of a phone.
Erase the dalvik cache from recovery. Also something else you need to do, but I forgot what.
BenPope said:
Erase the dalvik cache from recovery. Also something else you need to do, but I forgot what.
Click to expand...
Click to collapse
thanks, im guessing the next thing is just to flash the recovery image again?
No.
i ended up just wiping data, cache, and formating the system again, followed by restoring the rom and re-downloading the boot.img again and it worked after flashing the boot image the second time. scary stuff...
Related
I have been trying a number of different methods to fully root my EVO, yet for the life of me, cannot get a new ROM to flash properly. Each time I try flashing a new ROM, I end up in an endless boot loop & must go back into my SD card & rename my stock ROM back to 'PC36IMG.zip' in order to get out of it. I have heard that this sometimes happens from not erasing the dalvik cache, yet I have tried that too & still no luck.
Does anyone maybe have some pointers on why I may be experiencing this issue each time? Any input would be greatly appreciated! Thanks!
you rename your stock rom to pc36img.zip? What is a stock rom? Where did you ever read to do that?
I don't know what directions you read, but Something is very wrong.
Well it's A stock ROM that I picked up during the many different methods of rooting I have tried... For some reason, that has been the only way to get my phone to boot after trying to flash a ROM to it...
Most of the time if you wind up in a boot loop after flashing a new rom it's because you didn't wipe data, cache, and dalvik cache before flashing.
If you are using clockwork recovery it may be your problem. It has been reported to not complete wipes fully leading to post flash boot loops. Try amon-ra recovery.
Ok. so i searched for the problem and nothing seemed to work or be related to my issue.
I have the EV0 4G.
Its been rooted, wiped the data/cache/dalvik, flashed the rom and gapps yet it still get stuck at the boot screen.
Trying to install the Savaged-Zen ROM
My buddy, nor I can figure out whats going on here.
anyone have this issues
Thanks
socalchef00 said:
Ok. so i searched for the problem and nothing seemed to work or be related to my issue.
I have the EV0 4G.
Its been rooted, wiped the data/cache/dalvik, flashed the rom and gapps yet it still get stuck at the boot screen.
Trying to install the Savaged-Zen ROM
My buddy, nor I can figure out whats going on here.
anyone have this issues
Thanks
Click to expand...
Click to collapse
What rom were you coming from? What recovery are you using to flash and wipe? I may suggest flashing a format all zip before flashing the ROM. That will wipe your system and boot partition as well. Where are you getting stuck at? The splash screen or boot animation?
Format All, Install You Rom, wait for it too boot, then power down and install G-Apps afterwards if it hangs clear dalvik and cache
k2buckley said:
What rom were you coming from? What recovery are you using to flash and wipe? I may suggest flashing a format all zip before flashing the ROM. That will wipe your system and boot partition as well. Where are you getting stuck at? The splash screen or boot animation?
Click to expand...
Click to collapse
I am coming from the stock evo.
Was using the clockwork recovery.
I'm trying to put on savaged zen ROM.
I'm getting stuck at the boot loop after everything was wiped and then flashed.
thanks
About a month ago I decided I wanted to try out Synergy ROM for my EVO, so I went for God Mode and everything has been running fine...until now. I had installed a kernel earlier this week for underclocking and such, but decided today that I didn't really use it as much as I though so I decided to reflash the HTC stock 4.24. I just did that about 10 minutes ago, I made a backup in case something went wrong and I backed up all my apps/texts as well. It flashed, rebooted...then it got stuck in a boot loop. So I pulled the battery and booted up into the bootloader to go into recovery...when I found every time I hit recovery it would just restart to the bootloader. So I'm not really sure if there is anyway to restore my backup or any other way to boot into recovery. Am I just screwed? Or can I use ADB to boot into recovery/restore my backup? This is sort of my first question post so...If you need any more information just ask.
Thanks,
Suprgamr232
If your phone is still going into bootloops. Connect your phone to your computer and go to adb and type in adb reboot recovery. There you can revert back into a nandroid backup. Hope this helps
Not to be rude, but you didn't read the entire post did you? I can't access my recovery and AFAIK adb doesn't work while it's in a bootloop. Also, I don't think adb recognizes my device when it's in the bootloader either.
Hey im just trying to help, Maybe some how you lost your recovery? Maybe try reflashing your recovery from the bootloader, make sure it named pc36img.zip. See if you can access your recovery after that. What recovery are you using btw, clockworkmod or amon ra? and did you wipe your cache and dalvik cache files through recovery before you flashed your kernel?
If you can access your recovery after reflashing it, Try wiping those in recovery and rebooting, see if it boots into your rom. If not and you still get a boot loop but you can access recovery do a full wipe and reflash your rom or try restoring a nandroid
Not gonna argue with you, so I'll let it slide...I'm using clockworkmod and I did wipe my cache and dalvik cache. ATM I haven't been able to get a hold of a new recovery img for some reason...can never get it to download 100%, will try it soon hopefully.
There's no need to argue Ive heard that clockworkmod doesnt always completely wipe the cache and dalvik maybe try using amon ra this time around http://forum.xda-developers.com/showthread.php?t=705026
Cant hurt to try it. hope you can get it working for ya, gl
Still stuck in the bootloop. I tried restoring but that didn't help. I tried reinstalling the ROM and the kernel I used before and no change, I don't really want to wipe my phone and try it but...I guess it might turn out that way. Before I do though I was wondering if there is anything else I should try?
suprgamr232 said:
Still stuck in the bootloop. I tried restoring but that didn't help. I tried reinstalling the ROM and the kernel I used before and no change, I don't really want to wipe my phone and try it but...I guess it might turn out that way. Before I do though I was wondering if there is anything else I should try?
Click to expand...
Click to collapse
You're gona have to do a full wipe [ factory/data, cache, and dalvik ] , reflash your rom, kernel, ect. Once you sign in, boot, ect, you can use titanium backup to restore your apps and data, NOT system settings.
Alrighty then. Did that and everything seems to be working fine...A little disappointed but as long as I have my phone! Thanks for your help!
suprgamr232 said:
Alrighty then. Did that and everything seems to be working fine...A little disappointed but as long as I have my phone! Thanks for your help!
Click to expand...
Click to collapse
Glad its working again.
Hey guys,
Got a very weird problem here. I have previously flashed a CM10 nightly to my One X (international) and everything has been fine for around 3 weeks. Decided i wanted to try our the ViperX ROM. Previously upon flashing this ROM it just bootlooped but after another try with a slightly different method, i managed to get it to boot and all was merry. After titanium restore i rebooted, and this once again put me into a bootloop. Cannot get the ROM to boot. Why is this!!! Switched back to CM10. :good:
You need to do
fastboot flash boot boot.img
You may have done
fastboot boot boot.img
BenPope said:
You need to do
fastboot flash boot boot.img
You may have done
fastboot boot boot.img
Click to expand...
Click to collapse
Still doesnt boot man, im sure i flashed the boot image properly. This is the rundown of my flash process:
1: install from sd
2: in recovery, factory reset, wipe cache, wipe dalvic cache
3: Boot into fastboot and flash the boot.img
4: Reboot.
So it booted but into viper X, but after restoring with Titanium i was unable to get it to boot again.
I also tried "fastboot erase cache" to no avail
In fastboot type fastboot erase cache
Jamekerr said:
So it booted but into viper X, but after restoring with Titanium i was unable to get it to boot again.
Click to expand...
Click to collapse
Did you restore system apps or data?
Where does it stop booting, what is on the screen?
With tb, make sure you restore user apps only, none of the system apps.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
eyosen said:
With tb, make sure you restore user apps only, none of the system apps.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
Click to expand...
Click to collapse
Sorry forgot to mention I also used the "fast book erase cache" command.
As for titanium I restored all user apps and data and now that you mention it that could be the problem. I'll have another crack tomorrow and let you know.
Main reason I want to switch is I need much better battery life than CM10 but only temporarily. Can anyone recommend viperx as being a significant improvement?
BenPope said:
Did you restore system apps or data?
Where does it stop booting, what is on the screen?
Click to expand...
Click to collapse
It comes up with "HTC" vibrates then the viper crawls across the screen and it stops at the "htcONE" logo.
Restored apps and app data and guess what. Still doesn't boot. WHY! Going to just try apps, no data at ALL. Will report back.
I dunno why it won't start, double check you have the right boot.img (download it again and flash it again), in recovery erase cache and dalvik cache.
same issue
Hi i am also getting the same problem, i used the viper rom and others but it goes past the HTC logo looks as though it works but the lock ring is froze up and then it reboots itself over and over doing the same thing each time. Ive tried One_X_All-In-One_Kit_v1.2 and the manual CMD fastboot tutorial i dont know what to do to fix this, can anyone help me please?
EDIT* I seem to have it working now (fingers crossed), i used 'Nocturnal_Special_Edition_4.0_Odex' so thx to their good work that i now have a working rom for my phone phew
EDIT 20 MIN LAter* OK looks like i did something i shouldnt, it seemed to work, i made a change in the settings and then it rebooted and continued to reboot over and over so i tried installing a rom again and now it just stays at the htc quietly brilliant screen, what have i done this phone is now not so brilliant as its looking more and more that ive goosed it Any help apreciated.
boot.img
Help please
Hello,
I have 1x (CID 203) unlocked and rooted with cwm recovery. I had Cyanogenmod 10 nighly on it, well in hope of no bugs like in CM10 I flashed this http://forum.xda-developers.com/showthread.php?t=1763240 to it. Well it seemed to work a moment but then the device started rebooting randomly. I couldn't boot to recovery (strange?), the recovery screen flashed less than a second and the phone started to boot normally again. After a few tries (and reflashing recovery) I luckily got into the recovery. Tried to restore a nandroid backup which I made earlier yesterday. CWM said that the restore was successful but the device didnt boot anymore. Only shows htc logo and cyanogenmod loading screen. But nothing happens. Well, then I flashed Android Revolution HD 10.3. (with wiping the system data and so on) but it wont load any longer than the htc one logo screen. Rom installed fine and I flashed the boot.img.
Now I'm able to get into recovery and fastboot and charge my phone but how could I safely and surely return my phone to stock or make the ARHD work without completely bricking it? I'm thinking that relocking my device is not very safe if the RUU fails to install. What do you think? Can the firmware updates cause this problem to happen? Can I flash ARHD 9.7.2 to my device? Too bad I can't ask these questions in the ARHD thread....
In bootloader my phone says
Code:
hboot-0.94.0000
radio 1.1204.104.14
Any advice is highly appreciated, I'm not ready to bury my phone yet
Edit. ARHD 9.7.2 flashed correctly. Any ideas why the ARHD 10.3 keeps bootlooping? Yes, I have flashed the correct boot.imgs.
BenPope said:
I dunno why it won't start, double check you have the right boot.img (download it again and flash it again), in recovery erase cache and dalvik cache.
Click to expand...
Click to collapse
If I restore apps only it does boot however any sort of data and it refuses to. Very annoying as I am not able to retain texts accounts etc. I have a feeling it's because I originally backed up on a jellybean ROM and the data just doesn't want to work on ics
Squbbe said:
Hello,
I have 1x (CID 203) unlocked and rooted with cwm recovery. I had Cyanogenmod 10 nighly on it, well in hope of no bugs like in CM10 I flashed this http://forum.xda-developers.com/showthread.php?t=1763240 to it. Well it seemed to work a moment but then the device started rebooting randomly. I couldn't boot to recovery (strange?), the recovery screen flashed less than a second and the phone started to boot normally again. After a few tries (and reflashing recovery) I luckily got into the recovery. Tried to restore a nandroid backup which I made earlier yesterday. CWM said that the restore was successful but the device didnt boot anymore. Only shows htc logo and cyanogenmod loading screen. But nothing happens. Well, then I flashed Android Revolution HD 10.3. (with wiping the system data and so on) but it wont load any longer than the htc one logo screen. Rom installed fine and I flashed the boot.img.
Now I'm able to get into recovery and fastboot and charge my phone but how could I safely and surely return my phone to stock or make the ARHD work without completely bricking it? I'm thinking that relocking my device is not very safe if the RUU fails to install. What do you think? Can the firmware updates cause this problem to happen? Can I flash ARHD 9.7.2 to my device? Too bad I can't ask these questions in the ARHD thread....
In bootloader my phone says
Code:
hboot-0.94.0000
radio 1.1204.104.14
Any advice is highly appreciated, I'm not ready to bury my phone yet
Edit. ARHD 9.7.2 flashed correctly. Any ideas why the ARHD 10.3 keeps bootlooping? Yes, I have flashed the correct boot.imgs.
Click to expand...
Click to collapse
Try the fast boot erase cache command and see if that solves the boot issue. If not make sure in recovery your have cleared cache partition performed a factory reset and also cleared the dalvik cache. Again if none of these work try re flashing the boot.img or perhaps try another rom that is known to be stable.
Hey guys, this post is not for me but for a friend.
As the title already mentions, he's trying to get to stock
so the step he follows are:
Move boot.img from his stock rom nandroid backup to his fastboot folder
so lets begin
first step-> boot into bootloader
fastboot erase cache
fastboot flash boot boot.img
fastboot erase cache
--> boot into recovery
wipe data/factory reset
wipe cache
wipe delvik cache
-> back up and restore
--> restore
--- nandroid backup gets installed ---
... so far i can't see where he is doing anything wrong
so he proceeds to reboot his phone.. and now i asked him multiple times about the taken procedure and he claims his phone boots normally to the point where the wallpaper shows up and then he talks about the phone falling into a constant bootloop
What went wrong? Why is he experiencing this?
I've taken into consideration that he might be doing something wrong, but then i even wrote the steps above and he says he did it exactly that way.
i'm clueless to say the least and i hope someone here could help me help him
thank you
Try the cache clean up after the nandroid is restored.
Also try to install some other compatible kernel (if it's stock it should be also to find on the forums) after the restore with its modules if the cache clean up doesn't help.
Sent from my HTC One X using Tapatalk 2
Wipe the cache and dalvik cache again.
shadehh said:
Hey guys, this post is not for me but for a friend.
As the title already mentions, he's trying to get to stock
so the step he follows are:
Move boot.img from his stock rom nandroid backup to his fastboot folder
so lets begin
first step-> boot into bootloader
fastboot erase cache
fastboot flash boot boot.img
fastboot erase cache
--> boot into recovery
wipe data/factory reset
wipe cache
wipe delvik cache
-> back up and restore
--> restore
--- nandroid backup gets installed ---
... so far i can't see where he is doing anything wrong
so he proceeds to reboot his phone.. and now i asked him multiple times about the taken procedure and he claims his phone boots normally to the point where the wallpaper shows up and then he talks about the phone falling into a constant bootloop
What went wrong? Why is he experiencing this?
I've taken into consideration that he might be doing something wrong, but then i even wrote the steps above and he says he did it exactly that way.
i'm clueless to say the least and i hope someone here could help me help him
thank you
Click to expand...
Click to collapse
I restored my original 4.0.3 nandroid backup yesterday and got exactly the same problem coming from arhd 9.7.2 4.0.4. I want to get back to stock so I can get JB ota when its available. Mine also loaded the wallpaper and then rebooted. All I did to fix it was copy the boot.img from my nandroid backup and reflash that after I had restored again.
So the way I did it was
Boot into recovery
Full wipe
Restored rom
booted into bootloader
flash boot.img (from original nandroid)
rebooted and worked a treat
Thanks for the help guys. I mentioned all the suggestions on this thread to him and it he was able to get it running
Sent from my HTC One X using xda app-developers app
bradmax57 said:
I restored my original 4.0.3 nandroid backup yesterday and got exactly the same problem coming from arhd 9.7.2 4.0.4. I want to get back to stock so I can get JB ota when its available. Mine also loaded the wallpaper and then rebooted. All I did to fix it was copy the boot.img from my nandroid backup and reflash that after I had restored again.
So the way I did it was
Boot into recovery
Full wipe
Restored rom
booted into bootloader
flash boot.img (from original nandroid)
rebooted and worked a treat
Click to expand...
Click to collapse
OK I had the same issue and followed these steps, however when I try to flash boot.img I get an error in command prompt saying it cannot load boot.img (even though the file is copied to root of the 'sd card')
any idea what I'm doing wrong
squirrelbo1 said:
OK I had the same issue and followed these steps, however when I try to flash boot.img I get an error in command prompt saying it cannot load boot.img (even though the file is copied to root of the 'sd card')
any idea what I'm doing wrong
Click to expand...
Click to collapse
The file shouldn't be on the phone, but on the PC.
Place it in the folder in which you have your fastboot files.
oh of course. I'm being a moron again.
I cant believe I did that. so very very simple. sorry for being a numpty guys. wasn't thinking strait. Done a few custom rom installs but never flashed a backup. Didnt even think. You even have to type the directory into command prompt.sorry guys I can't believe I didn't think that. (was thinking along the lines of installing from zip way)
to be fair the only reason I'm doing all this is because my screen is playing up and I need to return it so getting everything as close to stock as possible so got other things on my mind
everything is working now. Thanks guys. My god stock rom on HTC one x from orange is ugly.
No worries mate. You're not a moron, just a beginner.
TToivanen said:
No worries mate. You're not a moron, just a beginner.
Click to expand...
Click to collapse
thanks heaps for the thread guys, this has been a great help as I'm doing a similar thing and had the same problem.