Related
Hi.
I have two accesspoints in my home and was hoping ti find a way to make wifi hand off to the strongest. Presently it hangs on for dear life to the last connected one.
Found better batterystats for gb spare parts equiv... only saw the market one yesterday. Nm about question2.
Any help is always appreicated.
J
Sent from my SPH-D700 using XDA App
Any love on the question of better wifi management?
sent from a phone using an app
I've looked into this. The answer is no. The reason why is most devices including laptops are set for us consumers to get the furtherest range on wifi ap's. Now laptops atleast have an option in the connection properties of your ap called roaming its default option hangs on to wifi as long as possible then there is aggressive which will change the ap its connected very fast but I have not seen any app that will let you make a "wifi roaming" setting change. I believe its kernel level with our device.
Sent from my SPH-D700 using xda premium
Damn... well thanks for the reply.
jbadboy2007 said:
I've looked into this. The answer is no. The reason why is most devices including laptops are set for us consumers to get the furtherest range on wifi ap's. Now laptops atleast have an option in the connection properties of your ap called roaming its default option hangs on to wifi as long as possible then there is aggressive which will change the ap its connected very fast but I have not seen any app that will let you make a "wifi roaming" setting change. I believe its kernel level with our device.
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
sent from a phone using an app
Ok so I bought roam control and it seems as tho it refuses to go into roaming.
I read this faq and it says,
"My phone does not get any signal when in “roam only” mode.
Chances are you have a Samsung phone. Samsung phones have different behavior - when in "roam only", they only roam on the 800mhz frequency band. There are areas in the US that are 1900mhz only, which means that Samsung phones will not get a signal in those areas."
However, when i'm not trying to force roam, it still goes into roaming sometimes but only when i'm not forcing it.
Is there any way I can change something to make it work?
Some one here may have an answer but if the application is 'acting up'/buggy you may have to contact the developer
Did you see this:
"Please send all questions and comments to [email protected]" The developer may be able to help you.
Or this one:
"If you wish to contact us, please send questions and comments to [email protected]. Make sure to include as many details as possible in your email."
Yeah I noticed that but I had assumed that this was something I could get a quicker response from our community. I'll contact him.
Sent from my SPH-D710 using XDA
+1
I have been using roam control since I got this phione and before on a Samsung Moment.
When I was running GB roms on this phone it worked flawlessly with it set to:
Phone Manufacturer: Samsung
Action after selection: exit app
Since I changed to ICS roms it has been a bit wonky though (same settings). It sometimes takes a minute or two to switch in or out of forced roam. Very infrequently it drops out of the app without doing anything. Make sure you have the roam notification box checked off while troubleshooting so you know what state it is really in. Also maybe try changing the action setting to reboot after selection as that was required for my Moment to work correctly. Since you have just installed it, this is probably not an issue for you but several times after flashing new roms it stopped working and I had to delete/reinstall it after restoring my apps. Just deleting data and cache never fixed it. Even now I "think" it is acting up a little but it is working correctly.
Well I have actually tried it on 3 roms now and its the same result. I've tried the rebooting option but that didn't work either. I first tried on aokp and then on stock fe10 and now on gb el29, none of which will pick up the roaming.
Sent from my SPH-D710 using XDA
peanut1596 said:
Well I have actually tried it on 3 roms now and its the same result. I've tried the rebooting option but that didn't work either. I first tried on aokp and then on stock fe10 and now on gb el29, none of which will pick up the roaming.
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
Of you have not already, try updating your PRL. After that maybe try changing to a custom PRL for the sake of troubleshooting. I am currently using 11119
http://forum.xda-developers.com/showthread.php?t=1267893
Care must be taken with regards to bandwidth of you were to stay running that way, but it might help. I wouldn't want to see you lose your contract on accounts of listening to me. LOL
Sent from my SPH-D710 using xda premium
Yeah I forgot to mention that I have used custom prls. However, I haven't yet tried 11119. I'll give it a shot and post an update in a bit.
Sent from my SPH-D710 using XDA
...same **** different day.... Its just refusing to connect. Developer hasn't responded yet but I'm waiting.
Sent from my SPH-D710 using XDA
been using an older version of roam control for a while now.. just downloaded cm9a4 last night while using roam control to force roam.. has worked flawless on multiple roms for me.. when i have issues i go into network settings and make sure its set to automatic, and turn the data roaming guards off, then open up rc and set to roam only
Is there a link so I can try an older version? Or could you email me the apk or something? Maybe that's all I need, an older version.
Sent from my SPH-D710 using XDA
I'm running the newest version of ROAM Control with PRL 11115 and it works flawlessly on both GB and ICS.
The trick, you really need to pay for it. The newest versions hacked and cracked simply do not work right. Sometimes they work for a while then they do not but paid for legit keys work 100% from what I've seen.
Out of respect for Mr Greg I'd rather not say which one older version seems to work 100% even if its pirated but as I said above, the newest one with a legit key will work.
I think a lot of it has to do with the part of the country your in. In the Omaha area...feel free to chime in Omaha-ens, it just won't work. I think it has to do with the frequency issue and the network your trying to roam too.
I'm not looking for a freebie. I did buy it. It just won't work for me, which is why i'm looking for an older version.
peanut1596 said:
I'm not looking for a freebie. I did buy it. It just won't work for me, which is why i'm looking for an older version.
Click to expand...
Click to collapse
In which case if you go to RC's webpage and email Mr. Greg I would assume he can hook you up with what you need.
Yeah, i'm waiting on a response. I trust that we will figure this out.
If you searched any of the other 10 or so threads on this you would see Samsung cannot always roam 3G depending on what spectrum Verizon is using, it has to do with PCS block.
If you roam 1x at all forced it is working.
Sent from my SPH-D710 using Tapatalk
No, it gets absolutely NO signal of any sort when trying to force roam.
Sent from my SPH-D710 using XDA
Then your probably not in an area where there is a roaming partner broadcasting on 800mhz.
Sent from my iPad using Tapatalk HD
Have you tried out any of the other PRLs yet Peanut?
This is the thread I use for PRLs:
http://forum.xda-developers.com/showthread.php?t=1521343
I just loaded FC19 (tried CM9, but my phone would randomly not ring when plp called)
Does anyone have the Easysmart.apk file or know how to get it without re flashing FC09 first?
Also, if i just drop it in system/app reboot will it be good to go?
finally is there any reason I should not install it?
Thanks
It just turns on wifi periodically to check if you are in a known network if I understand it correctly. Also sends ciq-like data .
Sent from my Samsung Epic 4G using Tapatalk 2
Do you know if the apk has been posted anywhere?
It will automatically switch you to the best connection whether it be 4G, 3G or wifi and it will map those spots with GPS so it will connect faster next time you are in the same area. It scans for wifi less often so to conserve battery versus normal wifi scanning.
Sent from my PantechP4100 using xda premium
oxsolid said:
Do you know if the apk has been posted anywhere?
Click to expand...
Click to collapse
You can pull it out of any FC09 ROM. It is called easysmart.apk and it won't work with other firmware versions without other supporting files. If on FC09 and don't want to use it simply turn it off. Settings>wireless and networks>mobile networks>automatic connections. It is NOT CIQ.
Sent from my PantechP4100 using xda premium
kennyglass123 said:
You can pull it out of any FC09 ROM. It is called easysmart.apk and it won't work with other firmware versions without other supporting files. If on FC09 and don't want to use it simply turn it off. Settings>wireless and networks>mobile networks>automatic connections. It is NOT CIQ.
Sent from my PantechP4100 using xda premium
Click to expand...
Click to collapse
Thanks Kenny,
So i noticed that you said that you must be on FC09, does that meant that easysmart.apk will not work on FC19 without additional work?
I am confused FC19 is a modem not a ROM. Why wouldn't the network app work if you are on a different modem?
I found this in another thread: (cherry picked the relevant parts)
2. Its in system/app in fc09... easysmart.apk
3. Yes push to system/app then reboot and enjoy...
Oops, I flashed FC 19 modem, pushed the FC09 easysmart app, rebooted, and see that the app is not visible in the settings area where it ought to be... bet it has something to do with that lib thing you were talking about...what do you think?
Should I just remove the file? I kind of liked the app, worked good for me....??
iceman19631
You could also try pushing serviceModeApp.apk from FC09 to system/app of FC19. That may help.
Tried it too...the option to "run" the optimizer is no where to be found...sigh...
Yep I'm sure there are some files somewhere that it requires that are missing on fc19..
why not just stick with FC09 modem that is the last offical release there were some problems reported with FC19 that is why it was never released.
done
In order to make it work on FC19 ROM you would need the phone.apk from FC09 ROM at a minimum with thanks to samep for figuring that out.
@Taz FC19 was a leaked ROM. Tar is in development.
Sent from my PantechP4100 using xda premium
kennyglass123 said:
@Taz FC19 was a leaked ROM. Tar is in development.
Sent from my PantechP4100 using xda premium
Click to expand...
Click to collapse
OPS my bag thought it was just a modem that was leaked didn't realize there was ROM leak too. I should stay up on the dev section but ever since CM7 and 9 I don't bother. They seemed to of cured me of my flashaholic symptoms LOL
Hi,
Is the overall suggestion to use this or leave it disabled?
I finally just switched from CleanGB to ThePeoplesRom so first time getting choice
jmsnyc said:
Hi,
Is the overall suggestion to use this or leave it disabled?
I finally just switched from CleanGB to ThePeoplesRom so first time getting choice
Click to expand...
Click to collapse
I love it... does a great job of handling my networks.... automatically switches to wifi everywhere there is a known network and switches to 4g/3g when there is none... some phones don't seem to like it though.........
flastnoles11 said:
I love it... does a great job of handling my networks.... automatically switches to wifi everywhere there is a known network and switches to 4g/3g when there is none... some phones don't seem to like it though.........
Click to expand...
Click to collapse
but most of the time you pick up wifi networks that are secure and you do not have password to.... so does it try to connect to those and waste battery?
jmsnyc said:
but most of the time you pick up wifi networks that are secure and you do not have password to.... so does it try to connect to those and waste battery?
Click to expand...
Click to collapse
No.
It sees them, but won't try to automatically connect to anything that doesn't have a saved password.
I use it and like it, other than not being able to customize it. I'm on Boost and it will switch to 4g (which I don't have) and I lose my data. Would be nice to have the option to "lock out" certain radios completely.
If you stay on top of manually switching between wifi and network data then it may not gain you much battery life (if any). But if you are like me, having it switch automatically so it's one less thing to remember will save you a fair bit of battery life.
can i have the APK?
Is Samsung EVER going to fix Wi-Fi disconnect issue??? My phone goes to sleep, on wake up my wifi will not reconnect until i turn it off/on. That's BS. This issue has been ever since ICS update came out.
delfin12 said:
Is Samsung EVER going to fix Wi-Fi disconnect issue??? My phone goes to sleep, on wake up my wifi will not reconnect until i turn it off/on. That's BS. This issue has been ever since ICS update came out.
Click to expand...
Click to collapse
Have you even bothered to troubleshoot your own issue? Obviously since wifi works fine for almost everyone including me it's something with your setup. What do you have your wifi sleep mode set to? Try changing your frequency mode to just 2.4. Have you tried any different networks?
Sent from my SPH-D710 using Tapatalk
Click here for custom mods for your E4GT
no they probably won't...must suck for you not knowing how to navigate through this forum. I've been enjoying a wifi that is always on even during deep sleep...8+hrs for a minute. (thanks agat)
ok so here is a link to a post ....check it
http://forum.xda-developers.com/showpost.php?p=32757404&postcount=37
suggestions...run agat kernel 0.6.2
My WiFi stays connected all night except for even I tell it to shut off with a cron job between 3 and 7 in the morning.
Sent from my SPH-D710 using xda premium
I'm running blazer ics right now and mine does that sometimes, usually after being asleep for over an hour or so. I have my wifi set to stay awake never. Honestly, it's so quick to reset I just don't care enough to fix it lol.
Sent from my SPH-D710 using XDA
Change "Keep Wi-Fi on during sleep" to Always.
Problem solved.
Sent from my SPH-D710 using xda premium
It's a known bug to some. I had a thread about this issue I believe. It had left for a few builds and then reappeared to some on the FI25 build. At one point we narrowed it down to a certain routers but no real evidence. It doesn't matter what your settings are in, even if you keep your settings on "keep awake always". The WiFi just stays as if connected but really isn't. It'll show greyed out bars or not active. I gave up and ignore it.
Laughing at some of you comments here. YES, I HAVE TRIED EVERYTHING. Different routers, all kinds of wifi settings, even used a root explorer to change some wifi settings. Still issues. I am ignoring it now and was hoping for a fix and it's pissing me off. Looks like it may be a hardware issue on some phones
delfin12 said:
Laughing at some of you comments here. YES, I HAVE TRIED EVERYTHING. Different routers, all kinds of wifi settings, even used a root explorer to change some wifi settings. Still issues. I am ignoring it now and was hoping for a fix and it's pissing me off. Looks like it may be a hardware issue on some phones
Click to expand...
Click to collapse
Just a heads up, adding this kind of relevant info to the original post when you make it is helpful
Sent from my SPH-D710 using Tapatalk
Click here for custom mods for your E4GT
ty080279 said:
no they probably won't...must suck for you not knowing how to navigate through this forum. I've been enjoying a wifi that is always on even during deep sleep...8+hrs for a minute. (thanks agat)
ok so here is a link to a post ....check it
http://forum.xda-developers.com/showpost.php?p=32757404&postcount=37
suggestions...run agat kernel 0.6.2
Click to expand...
Click to collapse
I'm running this kernel and mine still disconnects.
Mattix724 said:
Change "Keep Wi-Fi on during sleep" to Always.
Problem solved.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
This problem is deeper than a simple setting in the advanced wifi menu.
Sent from my SPH-D710 using Tapatalk 2
Check your router settings.
Sent from my SPH-D710 using xda premium
Bannjio said:
Honestly, it's so quick to reset I just don't care enough to fix it lol.
Click to expand...
Click to collapse
Plus I get a bit more of battery life
Tappin' Typin'
Mattix724 said:
Check your router settings.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
What exactly should I be looking for in my router settings? Btw, wifi still disconnects on Parandroid JB...wtf. Everything worked fine on GB.
I still have the issue where wifi just sucks down my battery worse than 3G when it idles, but the phone gets plenty of deep sleep. It's happened across roms, fresh wipes and only on ICS and never on any gingerbread setups I've used. I've tried 3 different routers, on different frequencies. I've spent countless hours combing through battery and cpu monitors. My final verdict is that ICS was for the most part a total **** show for this phone, and it's only usable because of the selfless devs who devote their free time to tweaks and builds that get the best they can out of it.
Sorry op, but in my anecdotal example, there is no answer for particular wifi problems on ICS with this phone.
Sent from my SPH-D710 using XDA
MustWarnothers said:
I still have the issue where wifi just sucks down my battery worse than 3G when it idles, but the phone gets plenty of deep sleep. It's happened across roms, fresh wipes and only on ICS and never on any gingerbread setups I've used. I've tried 3 different routers, on different frequencies. I've spent countless hours combing through battery and cpu monitors. My final verdict is that ICS was for the most part a total **** show for this phone, and it's only usable because of the selfless devs who devote their free time to tweaks and builds that get the best they can out of it.
Sorry op, but in my anecdotal example, there is no answer for particular wifi problems on ICS with this phone.
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
I just sure hope that the official JB rom for this phone will fix my wifi issues. It's weird, but some users have no issues with wifi and some do. I wonder if hardware is different. I'm not eligible to upgrade till July next year..kinda want to check out that LG Optimus..but at the same time want to see what GS4 (whenever it comes out) will have to offer
delfin12 said:
I just sure hope that the official JB rom for this phone will fix my wifi issues. It's weird, but some users have no issues with wifi and some do. I wonder if hardware is different. I'm not eligible to upgrade till July next year..kinda want to check out that LG Optimus..but at the same time want to see what GS4 (whenever it comes out) will have to offer
Click to expand...
Click to collapse
What channel and encryption type are you using (for your main connection)? Also what brands of routers have you tried it on. I don't think it is you, but I am just curious.
I use to use Linksys routers, but the last 2 I had were turds different models, and sent them in for RMA to verify the unit wasn't just a bad unit, now I won't use ANY Cisco product unless I have to (after the routers overheating in the middle of winter in my basement with proper ventilation and sending them back a few times, and their new 'secure' firmware that only allows you to connect via their website back into my local router).
lol don't listen to these people telling you to check the router settings...
It is a bug in ICS (most roms i have tried), i suggest downloading an app called Wi-fi keep alive.
nsxla said:
lol don't listen to these people telling you to check the router settings...
It is a bug in ICS (most roms i have tried), i suggest downloading an app called Wi-fi keep alive.
Click to expand...
Click to collapse
i'll try that as my phone got this bug also.
I didn't happen in FH13 Stock rom, but when i upgrade to FI27 this bug is starting out!
weird thing is this bug only occured on my office wi-fi (Linksys WAP54G). No problem occured when I use wi-fi at my home.
I heard if you stand on your head while doing the macarena your wifi won't disconnect. :thumbup:
We are legion, for we are many.
Sent from the DarkSide of the GalaXy with a MEK device
4hn said:
i'll try that as my phone got this bug also.
I didn't happen in FH13 Stock rom, but when i upgrade to FI27 this bug is starting out!
weird thing is this bug only occured on my office wi-fi (Linksys WAP54G). No problem occured when I use wi-fi at my home.
Click to expand...
Click to collapse
Ya the app seems to work, most of the time...Just make sure you launch it after a reboot? - Good enough for me though, also i have all the work arounds checked in advance settings, didn't have the patience to experiment.
Hello Everyone,
I am running the Virgin Rom with Ktoonsez.
I have been trying to find out the solution for more than two week but cannot find the solution. I got this strange problem in my phone, When I put my phone idle I get the full lte signal but however when i try to call someone all my signal get disappear but the strange thing is i can still talk to that person without the signal. As soon as i hang up my phone i would get all my signal back, when i get my signal back i can do normal browsing, watch video etc. I mean its no major issue, I was just wondering whether if there is any solution to get any signal bar back.
humritumri said:
Hello Everyone,
I am running the Virgin Rom with Ktoonsez.
I have been trying to find out the solution for more than two week but cannot find the solution. I got this strange problem in my phone, When I put my phone idle I get the full lte signal but however when i try to call someone all my signal get disappear but the strange thing is i can still talk to that person without the signal. As soon as i hang up my phone i would get all my signal back, when i get my signal back i can do normal browsing, watch video etc. I mean its no major issue, I was just wondering whether if there is any solution to get any signal bar back.
Click to expand...
Click to collapse
More device details please friend. What baseband are you on? NB4? If not, then you need to be on NB4 modem. If so, then it's possibly a kernel related issue I suggest flashing the latest build of Ktoonez kernel for AOSP, be sure to flash the right one for your phone. Example, don't flash the TouchWiz version
Sent from my SGH-M919 using xda app-developers app
Could also be APN settings
Sent from my SGH-M919 using Tapatalk
TSFox0317 said:
Could also be APN settings
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
For sure. I'm on C-Rom and I noticed the default apn settings were a little wacky. So after editing them, I'm running great with signal and of course free unlimited WiFi tether
Sent from my SGH-M919 using XDA Free mobile app
humritumri said:
Hello Everyone,
I am running the Virgin Rom with Ktoonsez.
I have been trying to find out the solution for more than two week but cannot find the solution. I got this strange problem in my phone, When I put my phone idle I get the full lte signal but however when i try to call someone all my signal get disappear but the strange thing is i can still talk to that person without the signal. As soon as i hang up my phone i would get all my signal back, when i get my signal back i can do normal browsing, watch video etc. I mean its no major issue, I was just wondering whether if there is any solution to get any signal bar back.
Click to expand...
Click to collapse
Sounds like it's working as it should! LTE cannot process phone calls so the device switches to 4g or edge depending on your area's reception. after the call is terminated, there is a very short delay, and you're reconnected to LTE (if there is reception for lte where you're at)
The device (depending on your settings) will try LTE, then 4G, then last resort to Edge when it's not on a call and just idling. It will connect when your device wants to access the internet or whatever, and selects the proper frequency (or mode) and use that for the connection..
check Settings/More Networks/Moble networks------ then under Network mode, you will see the connection choice.
if you tap on the network mode, it will give you different connection choices.
If you want LTE, you have only one choice and it downgrades itself as required as explained above.
you can save battery power by going to a lower frequency (like GSM only - which is edge Edge)
hope this helps you understand!
Aloha!
I want to flash the NB4 modem since im having the conection and do know how to use odin, just curious how to flash the modem as a .rar, I thought it had to be a .tar. so I felt it would be better to ask first before I brick my phone. I used the download for "Insane kit kat" I even unzipped it to find it still in .rar format
JORDVN said:
For sure. I'm on C-Rom and I noticed the default apn settings were a little wacky. So after editing them, I'm running great with signal and of course free unlimited WiFi tether
Sent from my SGH-M919 using XDA Free mobile app
Click to expand...
Click to collapse
How do I know what APN settings I should have?
Or if they are wacky?
Is there a guide?
Pp.
sent from my bluetooth controlled toaster that also takes pictures.
robandcathy said:
I want to flash the NB4 modem since im having the conection and do know how to use odin, just curious how to flash the modem as a .rar, I thought it had to be a .tar. so I felt it would be better to ask first before I brick my phone. I used the download for "Insane kit kat" I even unzipped it to find it still in .rar format
Click to expand...
Click to collapse
If you properly unzipped it and placed it in the phone slot of your odin program, you should be fine. Most people fail with either unzipping or placing it into the correct slot which in this case is the phone slot and not the PDA that you would use for a lot of other functions.
Sent from my SGH-M919 using XDA Free mobile app
---------- Post added at 09:54 AM ---------- Previous post was at 09:53 AM ----------
PanchoPlanet said:
How do I know what APN settings I should have?
Or if they are wacky?
Is there a guide?
Pp.
sent from my bluetooth controlled toaster that also takes pictures.
Click to expand...
Click to collapse
If you're running on T-Mobile, you should only see tmobile APN options available. Take a screenshot of all the available options that you have
Sent from my SGH-M919 using XDA Free mobile app
JORDVN said:
If you're running on T-Mobile, you should only see tmobile APN options available. Take a screenshot of all the available options that you have
Sent from my SGH-M919 using XDA Free mobile app
Click to expand...
Click to collapse
This is what I have.
Pp.
sent from my bluetooth controlled toaster that also takes pictures.