Hey there guys/gals
I use my pushbike as my main mode of transport where I live as there is so much traffic but using my phone is very annoying for me the worst fear is my phone dropping out my pocket and hitting the road or getting run over. I've been looking on the internet for a while and have come across some bike mounts for the GS3 I wanted to know if any of you have ever tried one if so how safe/secure are they, and also which of these do you think would be best?
Mount one
Mount two
Mount three
Thanks in advance
Mount #1 would make me very nervous. It seems like any big bump and the phone will come unclipped and go flying. Mount #3 looks more solid but I am not sure I would trust it. My choice would be Mount #2 because the phone is not going to slip out or come unclipped. I also like the idea of being waterproof.
I wouldn't risk a $600+ phone by using a cheap bicycle mount. take a look at the Rokbed v3 case for the s3, at least if it falls it might have better chances of surviving.
http://www.rokform.com/cart/Rokbed-v3-S3-Case.html
Sent from my Nexus 7 using Tapatalk 2
ariel_lh said:
I wouldn't risk a $600+ phone by using a cheap bicycle mount. take a look at the Rokbed v3 case for the s3, at least if it falls it might have better chances of surviving.
http://www.rokform.com/cart/Rokbed-v3-S3-Case.html
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
The RokBed V3 case looks good and all, but it isn't waterproof?
Unfortunately there are not many waterproof cases for the s3, but if waterproof and bike mount is what you need probably the BeachBuoy might work for you.
http://www.proporta.com/product/beachbuoy-bike-mounted-waterproof-samsung-galaxy-s3-case
Sent from my Nexus 7 using Tapatalk 2
ariel_lh said:
Unfortunately there are not many waterproof cases for the s3, but if waterproof and bike mount is what you need probably the BeachBuoy might work for you.
http://www.proporta.com/product/beachbuoy-bike-mounted-waterproof-samsung-galaxy-s3-case
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
The beach case is discontinued
and is the rokbed case bike mountable?
I recall seen a video where the case was mounted on a bike.
Here's is the adapter, you'll have to check if they still sell it or not
http://www.rokform.com/cart/Rokbed-v3-Bikemount.html,
Sent from my Nexus 7 using Tapatalk 2
This is what I have Easy Fit IPX4 Waterproof Motorcycle Bike Handlebar Mount for Samsung Galaxy S3 GT-i9300 SIII , It works well. The waterproof enclosure is removable and sturdy when mounted on the bike.
ariel_lh said:
I wouldn't risk a $600+ phone by using a cheap bicycle mount. take a look at the Rokbed v3 case for the s3, at least if it falls it might have better chances of surviving.
http://www.rokform.com/cart/Rokbed-v3-S3-Case.html
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
That looks like a pretty sweet system, but $45 for the case + $69 for the bike mount? $114 is pretty steep.
I have a buddy who has the Trident Kraken with bike mount- http://www.tridentcase.com/series/kraken-series.aspx
$37 for the whole system. I can't give a review yet, but I'll let you know after it comes in and I've used it for a few days.
I´ve been searching for a reliable waterproof bike mount too. For motorbike and bicycle. (For now I need it on my bicycle.)
It must be waterproof.
But it´s hard to find.
I don´t like this one because it seems to be not tough enough.
michaeljwestii said:
This is what I have Easy Fit IPX4 Waterproof Motorcycle Bike Handlebar Mount for Samsung Galaxy S3 GT-i9300 SIII , It works well. The waterproof enclosure is removable and sturdy when mounted on the bike.
Click to expand...
Click to collapse
I did a mount myself on Suzuki GSX-R before but it was not waterproof and secure.
WOuld be great to find a system like rockform.com but waterproof and suitable for other devices too when we get a new handheld soon or later.
Related
Today I was looking for Galaxy Nexus car mount holder on Amazon.
I came up with this car mount holder.
http://www.amazon.com/iOttie-Windsh...volution/dp/B00687N0GK/ref=zg_bs_2407763011_1
It is the best selling car mount.
http://www.amazon.com/gp/bestsellers/wireless/2407763011/ref=pd_zg_hrsr_cps_1_4_last
Is any of you tried this?
I have Galaxy Nexus GSM. I'm wondering if it fits.
I sent an email to the customer service but I'm wondering your comments
I sent email to customer service and this is the answer that i received
Dear xxx,
I have searched on google about your phone, and it says the width is 2.67 inches wide.
Our car mount's adjustable width size is from 2" to 3.2", so it won't be a problem.
Hope this information was helpful, and if you have any other question, please feel free to email us back.
Best regards,
Christina Kim
Click to expand...
Click to collapse
However, I'm considering to buy the OEM Galaxy Nexus car dock.
i used a slip grip with my cased droid x and found it worked very well.
SlipGrip Galaxy Nexus Options
That looks pretty good,I used to use a $5 belt clip from ebay on my Eris, but now they only make them facing in. Thanks for the link. A bit spendy, but the best option for a case I've seen.
Sent from my Galaxy Nexus using xda premium
You're welcome.
I checked threads about car holders and I couldn't see anything about this car holder. Even though it is the most popular one in Amazon shop, it is not popular here.
T-Keith said:
That looks pretty good,I used to use a $5 belt clip from ebay on my Eris, but now they only make them facing in. Thanks for the link. A bit spendy, but the best option for a case I've seen.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Does this car mount have a clear view when using the camera? Some car mounts you can see a bit of the mount attachment
Sent from my Galaxy Nexus using Tapatalk
I have the iOttie mount and its just decent. I have my Gnex in an otterbox defender case and it barely is wide enough to hold it..with maybe a 1/4" to spare..
My phone vibrated and fell out some. It might be more stable if I permanently mounted it to the dash instead of putting it on the windshield.
But give it a go if you want. Its dirt cheap on amazon.
Sent from my Galaxy Nexus using Tapatalk
Thanks for comment. I think I will order it.
I'm willing to buy an office car dock for GNEX GSM, but I think it is still not released?
mattbourge said:
I have the iOttie mount and its just decent. I have my Gnex in an otterbox defender case and it barely is wide enough to hold it..with maybe a 1/4" to spare..
My phone vibrated and fell out some. It might be more stable if I permanently mounted it to the dash instead of putting it on the windshield.
But give it a go if you want. Its dirt cheap on amazon.
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
SNaReX said:
Today I was looking for Galaxy Nexus car mount holder on Amazon.
I came up with this car mount holder.
http://www.amazon.com/iOttie-Windsh...volution/dp/B00687N0GK/ref=zg_bs_2407763011_1
It is the best selling car mount.
http://www.amazon.com/gp/bestsellers/wireless/2407763011/ref=pd_zg_hrsr_cps_1_4_last
Is any of you tried this?
I have Galaxy Nexus GSM. I'm wondering if it fits.
I sent an email to the customer service but I'm wondering your comments
Click to expand...
Click to collapse
Similar item is avaliable at dx.com at a much cheaper price.
http://dx.com/universal-car-swivel-...sung-galaxy-nexus-i9250-galaxy-w-i9103-113496
This is what I ordered. I fabbed a charger cable to the bottom of it too.
http://www.amazon.com/Arkon-SM410-Universal-Windshield-Smartphones/dp/B003ELOOZO/ref=sr_1_1?s=wireless&ie=UTF8&qid=1330994745&sr=1-1
How did you do that?
ellisz said:
This is what I ordered. I fabbed a charger cable to the bottom of it too.
http://www.amazon.com/Arkon-SM410-Universal-Windshield-Smartphones/dp/B003ELOOZO/ref=sr_1_1?s=wireless&ie=UTF8&qid=1330994745&sr=1-1
Click to expand...
Click to collapse
So I'm looking for a cheap bike mount, I may be using a extended battery but I can get another mount for that, Looking for the cheapest one,
Whats out there?
Probably the best would be to buy a Verizon dock for $25 or cheaper and DIY mount solution.
...of the people, by the people, for the people...
I saw one at the following (but I have not purchased it):
http://mobile.brando.com/samsung-galaxy-nexus-bicycle-phone-holder_p07847c1477d011.html
I can recommend this company's screen protectors as I use them for all my devices (tablets and phones).
Hope this helps... plee3
slipgrip mount?
http://www.slipgripcarmounts.com/SL...ONE-To-Be-Used-While-No-Case-On_p_125700.html
If you spend a couple bucks on a solid case, an extra 15$ gets you a bike mount. Trident Kraken: tridenteer.com click Galaxy Nexus.
mattwilkinson11 said:
So I'm looking for a cheap bike mount, I may be using a extended battery but I can get another mount for that, Looking for the cheapest one,
Whats out there?
Click to expand...
Click to collapse
+1
Sent from my Gucci Nexus using xda premium
Any recommendations on a dashboard or window mount for the a100? I was thinking about hooking mine up to the car as a media player/gps.
Thanks
Sent from my ADR6400L using Tapatalk 2
Arkon SM517
I purchased this and am surprised how well it holds the tablet: Arkon SM517 Windshield Mount for 7-Inch Tablets
It also works fine as a slightly oversized holder for my smartphone.
Hey thanks and it's cheaper than what other options i found.
Sent from my ADR6400L using Tapatalk 2
RangerJay said:
I purchased this and am surprised how well it holds the tablet: Arkon SM517 Windshield Mount for 7-Inch Tablets
It also works fine as a slightly oversized holder for my smartphone.
Click to expand...
Click to collapse
I have this mount and it works great. I use it in an old Mac tractor trailer 5 days a week and it holds up great. Has yet to fall off the window, which is shocking cause my truck is very very rough riding.
Sent from my PC36100 using xda premium
http://www.amazon.com/Kropsson-Univ...5?s=electronics&ie=UTF8&qid=1337876696&sr=1-5
800 or 850. This is one hell of a Tablet Holder! It will also take Samsung Galaxy S in portrait mode.
It is very well build, with quality plastic and soft touch materials. The joints are metal and really sturdy. It holds my a100 with almost no vibration even on rough roads.(I have the acer a100 genuine bump protector on - which is also the best in my opinion, even makes a100 more beautiful because the back is made in brushed metal look - stunning)
Pricey for sure! But functionality, looks and build quality goes for 9/10
P.S. You could easily read the reviews - they are all as nice as the product itself. There are also HD videos/illustrations in you tube/google where you could see what you are paying for in the closest detail!
Lots of options thats what i love about xda. Good people and good advice
Sent from my ADR6400L using Tapatalk 2
Hi guys, I just picked up the ARKON SM515 mount for my GS3 and I love it. I think it was $16 on amazon. (link to their site http://www.arkon.com/Galaxy S III/slimgrip-galaxy-s-3-mini-windshield-car-mount.html ) They also have one called the AP515 which is for the iphone and its a few bucks cheaper but I just don't know if the GS3 will fit. The SM514 is similar to the 515 but it's a tiny bit bigger due to the adjustable arm (another great one to consider if you have the room for it) Anyway I mounted in a weird spot near my radio on the center of the dashboard. It can swivel in almost any direction which is cool and it's holding on tight. You can adjust the feet that hold the phone and they have rubber padding that way they won't scratch anything. I mounted mine using the included dashboard sticky pad. Here's a few pics taken with my bionic. (not the best camera)
p.s. In case any of you are wonder i'm using the Fosmon TPU + clear back case from amazon. It's around 6 bucks.
Deffinately thinking I'll order one. Been wanting a good mount for my car witht he new phone.
Arkon makes some FANTASTIC products - glad to know they didn't skimp out on the S3.
I bought the bad boy.
http://www.arkon.com/Galaxy S III/slimgrip-galaxy-s-3-car-floor-mount.html
I hate using AC and window mounts. This can sit right in between my e-brake and driver seat.
That's the exact mount I have in my car. I originally bought it for my Nook Color, but it also fits the S3 perfectly. Nice strong hold.
Sent from my SGH-T999 using Tapatalk 2
How removable is the dashboard sticky pad? Would it leave behind any gunk when taking it off? And how easy is it to take off/put on. Thanks.
Tryptonite said:
How removable is the dashboard sticky pad? Would it leave behind any gunk when taking it off? And how easy is it to take off/put on. Thanks.
Click to expand...
Click to collapse
Taking the phone off the mount is pretty easy but this thing does hold it pretty firmly in place. I don't know how easy The 3M sticky pad will come off as it feels pretty solid on there. In my case my dash is plastic so it should come off pretty easily (but not too easy I hope) . You may want to contact their customer service and see what they say about it
sebastianraven said:
I bought the bad boy.
http://www.arkon.com/Galaxy S III/slimgrip-galaxy-s-3-car-floor-mount.html
I hate using AC and window mounts. This can sit right in between my e-brake and driver seat.
Click to expand...
Click to collapse
That looks awesome.
Check out Mountek CD slot mount.
http://www.amazon.com/gp/aw/d/B004E5W3D4/ref=mp_s_a_1?qid=1342158086&sr=8-1
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Paging Dr B said:
Hi guys, I just picked up the ARKON SM515 mount for my GS3 and I love it. I think it was $16 on amazon. (link to their site http://www.arkon.com/Galaxy S III/slimgrip-galaxy-s-3-mini-windshield-car-mount.html ) They also have one called the AP515 which is for the iphone and its a few bucks cheaper but I just don't know if the GS3 will fit. The SM514 is similar to the 515 but it's a tiny bit bigger due to the adjustable arm (another great one to consider if you have the room for it) Anyway I mounted in a weird spot near my radio on the center of the dashboard. It can swivel in almost any direction which is cool and it's holding on tight. You can adjust the feet that hold the phone and they have rubber padding that way they won't scratch anything. I mounted mine using the included dashboard sticky pad. Here's a few pics taken with my bionic. (not the best camera)
p.s. In case any of you are wonder i'm using the Fosmon TPU + clear back case from amazon. It's around 6 bucks.
Click to expand...
Click to collapse
thanks for this. i've been looking for a good vehicle mount for a while
Im looking for something like this but with shorter neck.
For you guys that don't like windshield mounts, I've used the "sticky" Arkon mount. It works pretty well. I like the Mobile Grip, but if you use a big case like an otterbox, you'll probably be better off with the slim-grip, that thing will hold anything.
Mobile Grip: http://www.arkon.com/Galaxy S III/mobile-grip-galaxy-s-3-car-mount.html
Slim-Grip: http://www.arkon.com/Galaxy S III/slimgrip-galaxy-s-3-car-mount.html
sebastianraven said:
I bought the bad boy.
http://www.arkon.com/Galaxy S III/slimgrip-galaxy-s-3-car-floor-mount.html
I hate using AC and window mounts. This can sit right in between my e-brake and driver seat.
Click to expand...
Click to collapse
Looks interesting. Can you put up pictures/video when you get it installed? I'm wondering whether its long enough that you don't have to look down from the road too much to see the screen.
Shady Gambino said:
For you guys that don't like windshield mounts, I've used the "sticky" Arkon mount. It works pretty well. I like the Mobile Grip, but if you use a big case like an otterbox, you'll probably be better off with the slim-grip, that thing will hold anything.
Mobile Grip: http://www.arkon.com/Galaxy S III/mobile-grip-galaxy-s-3-car-mount.html
Slim-Grip: http://www.arkon.com/Galaxy S III/slimgrip-galaxy-s-3-car-mount.html
Click to expand...
Click to collapse
Yeah, their sticky mount is awesome!!! I just recently reviewed their Slim Grip Ultra with stick mount here on XDA: http://forum.xda-developers.com/showthread.php?t=2174449 - that mount works with ANY phone up to Note 2/Note 3 size and even 7"/8" tablets. Definitely recommend it.
go
good
Can anyone recommend a good car mount?
I just bought some cheesy magnetic thing from Amazon. Will be returning ASAP. Ideally, I think I'm looking for something that can clip into either the air vents or on the dash of my car. I realized there probably aren't many pixel specific accessories made yet, but maybe someone has had good success with a different model for an earlier phone?
Anyway just wondering what you all were planning on using.
I've been using a good magnetic mount for the CD slot in my car since the Nexus 5 days. I like the Koomus brand of them from Amazon.
Sent from my Pixel 2 XL using Tapatalk
I personally been using ProClip for a while. With my Nexus 6 I have a universal one since I have a thin case it slips in. Mounts are made per vehicle too.
https://www.proclipusa.com/category/google-pixel-2
Sent from my Nexus 6 using Tapatalk
I've had the third generation iOttie car mount for about a year, and it is excellent. It doesn't have a vent clip, but its suction cup mount is very sturdy. It even comes with a little pad you can use if your dash is textured.
I second the ProClip. You can get a custom mount for your vehicle, and select a separate holder. I've got a custom mount and a universal holder that can be adjusted if you switch phones.
I second the recommendations for iOttie mounts. I bought their wireless charging one back when I got my Galaxy S6, but I still use it with my Pixels because it is incredibly convenient to secure and remove the device. Excellent quality, usability, and adjustability, well worth the purchase.
coolsilver said:
I personally been using ProClip for a while. With my Nexus 6 I have a universal one since I have a thin case it slips in. Mounts are made per vehicle too.
https://www.proclipusa.com/category/google-pixel-2
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Looks like a solid product! I have an '09 Kia Spectra and the dash doesn't look like an easy place to put a phone mount. I checked out their custom mount for my car and the only drawback I can see is it completely covers a vent (for a/c) which may or may not be an issues, I won't know until mounted but.. Any experience with that for you?
Yea on my prior vehicle I had it cover the vent. It was out far enough so it still put out air but it wasn't really directional as far as flow as before. Center ones I didn't care as much about being pointed at me to keep cool. It was a solid bracket though
coolsilver said:
Yea on my prior vehicle I had it cover the vent. It was out far enough so it still put out air but it wasn't really directional as far as flow as before. Center ones I didn't care as much about being pointed at me to keep cool. It was a solid bracket though
Click to expand...
Click to collapse
Thanks! They do look solid ...
I have an existing car mount for my S7 before I got the XL, it holds the phone in landscape and squeezes the sides. Little concerned that this may not be good for the squeeze sensors. Anyone think it could affect the sensors over time?
I have this one since May 2016 no issues and easy off and on for various phones..I have vent but they make cd slot and I think window too
iOttie
https://www.amazon.com/gp/product/B017HME9DC/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Sent using Tapatalk
Haven't used these myself, but they look pretty sweet...https://www.amazon.com/dp/B01DCSIRG0/ref=cm_sw_r_cp_awdb_KmO7zbB7T3BNE
Anybody used this one before?
Cowbell_Guy said:
Can anyone recommend a good car mount?
I just bought some cheesy magnetic thing from Amazon. Will be returning ASAP. Ideally, I think I'm looking for something that can clip into either the air vents or on the dash of my car. I realized there probably aren't many pixel specific accessories made yet, but maybe someone has had good success with a different model for an earlier phone?
Anyway just wondering what you all were planning on using.
Click to expand...
Click to collapse
Another vote for Proclip's mounting solution. The universal large holder works fine with my Pixel 2 XL with a (Caseology Parallax) case. It's pricey but it works beautifully.
I just ordered the IOAuto magnet holder to use with Proclip's mounting bracket. I'm tired of sliding my phone into the holder. 1st world problems, I know.
Sent from my Pixel 2 XL using Tapatalk
morbidhippy said:
I just ordered the iOttie magnet holder to use with Proclip's mounting bracket. I'm tired of sliding my phone into the holder.
Click to expand...
Click to collapse
How does that work exactly? Which iOttie did you buy, and how does it work with the ProClip bracket?
dberthia said:
How does that work exactly? Which iOttie did you buy, and how does it work with the ProClip bracket?
Click to expand...
Click to collapse
Oops, I meant IOAuto, not iOttie.
https://www.proclipusa.com/product/...xkJK2QwbcDyiiZdeiDsdvqZtMoM3Vg84aAjDOEALw_wcB
I bought the IOAuto Pro. It attaches to the vehicle mount that I purchased previously from Proclip. It comes with small circular metal disks that should be attached to your phone.
I hate the thought of using adhesive to stick anything on my phone so I'm going to try and place the disk between the phone and my TPU case. In think the magnet will still work fine.
Check out YouTube. I've seen a couple of videos of others installing it.
Sent from my Pixel 2 XL using Tapatalk
I like this simple magnetic holder:
Techmatte MagGrip Orbit Universal Air Vent Magnetic Car Mount Holder
It requires a thin metal plate which works fine if you use a TPU case or other case that's not too thick on the back; this way, it doesn't require any permanent application. I bought 3 for family members, and a friend got one after seeing mine. It's easy to mount, secure, very simple in design - it uses a steel ball that mounts to an air vent, and a magnetic piece that connects to the ball, giving easy adjustment in all directions, or complete removal. This magnetic piece connects to the phone's steel plate. My wife has an iphone 6P which works well; I have a nexus 5X.
coolsilver said:
I personally been using ProClip for a while. With my Nexus 6 I have a universal one since I have a thin case it slips in. Mounts are made per vehicle too.
https://www.proclipusa.com/category/google-pixel-2
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Adding a :good: for the ProClip. Mine just came yesterday and works perfect.
morbidhippy said:
I hate the thought of using adhesive to stick anything on my phone so I'm going to try and place the disk between the phone and my TPU case. In think the magnet will still work fine.
Click to expand...
Click to collapse
I'm curious to see if that works out for you. I'm intrigued, but it seems like $50 is a bit steep for that mount. If it works well for you with a case, I may consider it though.
I know my solution isn't going to be for everyone, but it works well for my needs. I have a hybrid Proclip/Ram Mount solution. Proclip for the center dash mount, then Ram Mounts for the rest (ball, short arm, and X Grip holder). It's more involved than the common solutions, but it puts my phone right whereIi want it and it's rock solid--which is important for those track days.
As mentioned upthread, this does partially block the vent, but on my Mustang not by too much, and the passenger still gets air flow when it's directed their way. A bonus is the phone stays nice & cool when staying on playing podcasts while commuting, or running the telemetry apps while on track.
I can strongly recommend this one. They're a little pricey but I have them in my truck, car, 4-wheeler and mountain bike. Just the spring clips are strong and when you add the rubber sling it'll hold on to the phone almost no matter what. This one actually fits my P2XL better than my PXL. https://www.amazon.com/gp/product/B0066BWMNU/ref=oh_aui_search_detailpage?ie=UTF8&psc=1