Develop Bugs

[Q] Com.android.phone on boot

Hello,i was having a problem with my HTC one x tegra 3 32gb version.I rooted,put a TWRP recovery.Then try to flash with a cianogenmod.I wipe data before.Clear cache both.The flash was succesfull but when phone load up to home screen it shows this error "Unfortunately,the process com.android.phone has stopped.".Then i try to flash with a venom rom and the same problem apears again.

Same problem here.Please help..

Did you flash the boot.img?
Sent from my IceCold One X

TToivanen said:
Did you flash the boot.img?
Sent from my IceCold One X
Click to expand...
Click to collapse
Do you mean flash recovery like CWNM or TWRP?

quasar iKrime said:
Do you mean flash recovery like CWNM or TWRP?
Click to expand...
Click to collapse
No. You must extract the boot.img from the ROM zip file and put it to your fastboot folder. Type fastboot flash boot boot.img to flash it.
Then full wipe and flash the ROM in recovery.
Sent from my IceCold One X

TToivanen said:
No. You must extract the boot.img from the ROM zip file and put it to your fastboot folder. Type fastboot flash boot boot.img to flash it.
Then full wipe and flash the ROM in recovery.
Sent from my IceCold One X
Click to expand...
Click to collapse
Im Just Downloaded Slimrom.And selected install zip from sd form CWM.There is need for flash?Please help and thanks.

quasar iKrime said:
Im Just Downloaded Slimrom.And selected install zip from sd form CWM.There is need for flash?Please help and thanks.
Click to expand...
Click to collapse
Download this : https://www.dropbox.com/s/0y31poo1ki...e script.zip
1. Flash The boot.img from the rom.zip(Open rom.zip using winrar/winzip and extract the boot.img from it). Put the boot.img in fasboot folder and then boot into fastboot and run the following line in cmd:
fastboot erase cache
fastboot flash boot boot.img
fastboot erase cache
2. Boot into recovery and use the super wipe script.
3. Flash the rom.zip and then gapps.zip
4. Reboot.
5. Enjoy!

@vin4yak
Thanks but he already figured it out and informed me via PM.
Now we wait for @Mvalev95 to pop up...

[email protected] i didnt flash the boot.img now i've done your steps but i have new problem but i can use the phone.The problem is i get error android.process.acore

Mvalev95 said:
[email protected] i didnt flash the boot.img now i've done your steps but i have new problem but i can use the phone.The problem is i get error android.process.acore
Click to expand...
Click to collapse
If you have followed the exacts steps which I have given, then it should work fine!
Maybe its a bad download? Download the ROM/Gapps again OR try downloading a different ROM like IceColdJelly (which I'm using) and repeat the steps again which I have given...
ROM Link : http://tunsd.de/downloads/ICJ/IceColdJelly421/aokp_ICJ422-V3.0.zip
Gapps: http://goo.im/gapps/gapps-jb-20130301-signed.zip

I am such a newb i forgot to put the gapps zip when flashing.What i need to do now to flash the rom with the with the rom and the gapps.I think i dont have to do with boot.img now.

Mvalev95 said:
I am such a newb i forgot to put the gapps zip when flashing.What i need to do now to flash the rom with the with the rom and the gapps.I think i dont have to do with boot.img now.
Click to expand...
Click to collapse
Yes you don't need to flash the boot.img again... Just boot into recovery... wipe cache+dalvic and then flash gapps.zip (Download the one which I gave you)... and then reboot!
Edit: The above way can be followed if your booting into ROM correctly... If you can't then just follow the steps again which I had posted earlier in the thread...

Everything is fixxed thanks i add only gapps and the problem persist but clear contact storage and now is ok.

Mvalev95 said:
Everything is fixxed thanks i add only gapps and the problem persist but clear contact storage and now is ok.
Click to expand...
Click to collapse
great!! :good:

[Q] switching ROMs

well i got know the ROM blade.
and it got some bugs so i want to replace it to mik project X rom..
do i need to do the same thing as i installed the blade rom?
or i need to do something else..
and can u get a guild how to install rom agine? i kinda forgot..

1. Flash the boot.img via fastboot and then fastboot erase cache
2. Go to recovery and wipe data/cache/dalvic and format /system
3. Flash rom.zip via recovery
4. Reboot!

vin4yak said:
1. Flash the boot.img via fastboot and then fastboot erase cache
2. Go to recovery and wipe data/cache/dalvic and format /system
3. Flash rom.zip via recovery
4. Reboot!
Click to expand...
Click to collapse
thank's you!
and my Hboot ver. is 1.36.
ok isn't it?

Ron312123 said:
thank's you!
and my Hboot ver. is 1.36.
ok isn't it?
Click to expand...
Click to collapse
Yes, it's fine!
You can flash any rom out here!

Hboot sounds good to me.
I recommend doing a nandroid backup first so if anything goes wrong you can just restore from it but mind flashing your old boot.img again.

land.apfel said:
Hboot sounds good to me.
I recommend doing a nandroid backup first so if anything goes wrong you can just restore from it but mind flashing your old boot.img again.
Click to expand...
Click to collapse
thanks i did an recovery one.. i hope everything goes ok.. for know its seems it dosent.. ill try doing it agine..
nvm! its worked.. i just reset it!
thanks!
that ROM look awsome

[Q] After unroot can't root again on htc one x

I rooted and unlocked on my ics in HTC one X and no rom. But after HTC officially released Jelly Bean 4.1.1 , i unrooted again and updated in official Jelly Bean. now i wanted to use CM 10.1 rom and many days i searched a lot and failed to root again. please help me i got some problem.
#unlocked
# S on
# Hboot 1.36
#OS JB 4.1.1
#when i select recovery in Bootloader it show a error sign and restart
#failed to open master usb....
#i tried JB but it failed too
* i did a factory reset and now erase everything.
* if i make a call somebody can't hear my voice and some said very low voice.
please help me. Thanks in advanced

After you updated the phone you must unlock the bootloader (if you relocked it) and flash a new custom recovery.
Flash the new boot.img from the new rom, perform a full wipe in the recovery and install the new rom.zip !

Mr Hofs said:
After you updated the phone you must unlock the bootloader (if you relocked it) and flash a new custom recovery.
Flash the new boot.img from the new rom, perform a full wipe in the recovery and install the new rom.zip !
Click to expand...
Click to collapse
It's still shows unlocked and i wanna wipe or install from SD card but Recovery option not working.

Like i said, you must flash a custom recovery first. When you updated the phone its done with a stock recovery. A stock recovery is useless to us flashers.
Its all exactly the same as it was with ics.....

Mr Hofs said:
Like i said, you must flash a custom recovery first. When you updated the phone its done with a stock recovery. A stock recovery is useless to us flashers.
Its all exactly the same as it was with ics.....
Click to expand...
Click to collapse
r u saying to do follow the same way like i did for unlocked+root on my ICS ? i tried it but HTCdev not working like before.

Look.....you don't have to do the htcdev thing. You say your bootloader is unlocked. So flash a custom recovey and install a JB rom as usual

Mr Hofs said:
Look.....you don't have to do the htcdev thing. You say your bootloader is unlocked. So flash a custom recovey and install a JB rom as usual
Click to expand...
Click to collapse
okay on my way to try and i will get back to u. btw do u have any correct link of which i should follow ? Thanks a lot

Use this to guide you.
http://forum.xda-developers.com/showthread.php?t=1592355
But flash this recovery and not the one mentioned in the guide
http://db.tt/SPXdFfPw

Mr Hofs said:
Use this to guide you.
http://forum.xda-developers.com/showthread.php?t=1592355
But flash this recovery and not the one mentioned in the guide
http://db.tt/SPXdFfPw
Click to expand...
Click to collapse
C:\fastboot>fastboot flash recovery-clockwork-touch-5.8.4.0-endeavoru.img
unknown partition 'recovery-clockwork-touch-5.8.4.0-endeavoru.img'
error: cannot determine image filename for 'recovery-clockwork-touch-5.8.4.0-end
eavoru.img'
C:\fastboot>fastboot flash philz recovary 5.6.1.img
error: cannot load 'recovary'

Put my linked recovery into the fastboot folder....
Then rename the file to just "recovery.img
Fastboot flash recovery recovery.img
You seem to have messed up the command mate

himel_htc said:
C:\fastboot>fastboot flash recovery-clockwork-touch-5.8.4.0-endeavoru.img
unknown partition 'recovery-clockwork-touch-5.8.4.0-endeavoru.img'
error: cannot determine image filename for 'recovery-clockwork-touch-5.8.4.0-end
eavoru.img'
C:\fastboot>fastboot flash philz recovary 5.6.1.img
error: cannot load 'recovary'
Click to expand...
Click to collapse
i think u should rename it as : recovery.img

Husky34 said:
i think u should rename it as : recovery.img
Click to expand...
Click to collapse
Lol....beat you to it !

Mr Hofs said:
Put my linked recovery into the fastboot folder....
Then rename the file to just "recovery.img
Fastboot flash recovery recovery.img
You seem to have messed up the command mate
Click to expand...
Click to collapse
Yes u r right...thank u so much
cyMod RC2 loading......
#If i ever want to back to HTC official rom when the release the 4.2.2 what should i need to do ?

Well then you need to install the stock nandroid backup, flash the stock recovery and then update

Unfortunately, the process com.android.phone has stopped.....:crying:
after open first msg it and i can't do anything. what wrong i did ?

Sure you installed gapps too, and that it the right gapps ?
* flash boot.img
* make a full wipe in the recovery
* install CM10.1
* install gapps
* reboot

Mr Hofs said:
Sure you installed gapps too, and that it the right gapps ?
* flash boot.img
* make a full wipe in the recovery
* install CM10.1
* install gapps
* reboot
Click to expand...
Click to collapse
1.wipe everything then tried randomly all
2.cm-10.1.0-endeavoru
3.UPDATE-SuperSU-v1.00
4.gapps-jb-20130301-signed
#CWM-6032-advwipe-jb422-nontouch-recovery-endeavoru-v1.2
should i try anything else or change my recovery ?

changed recovery to TWR v2.5.0.0
flash boot.img
wipe factory reset
flashing CM 10.1 and gapps-jb-20130301-signed ...completed
rebooting system.....well again process com.android.phone stop

Why update su ? Link me to the thread please...
and try another rom for test purposes

Mr Hofs said:
Why update su ? Link me to the thread please...
and try another rom for test purposes
Click to expand...
Click to collapse
http://www.chainfire.eu/articles/129/SuperSU_v1_00_has_been_released_/
any good rom suggest please?

Phone won't boot after update

I received a msg to perform an ota now the phone won't boot

justdrew said:
I received a msg to perform an ota now the phone won't boot
Click to expand...
Click to collapse
Was your phone rooted?
If it was and you didn't unroot 1st that is why it won't boot...

I restored with fastboot system IMG

justdrew said:
I restored with fastboot system IMG
Click to expand...
Click to collapse
Cool, just remember before updating you need to unroot...

More details on fastboot system IMG?
justdrew said:
I restored with fastboot system IMG
Click to expand...
Click to collapse
I'm currently stuck also, could you get me started with using "fastboot system IMG" please?

bubblegoose said:
I'm currently stuck also, could you get me started with using "fastboot system IMG" please?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=3079590
Flash the system image in that thread. Boot, open supersu, unroot, reboot. Search for update through settings and apply.

Where do you put the IMG file? on the external SD card?? I'm in the same situation. I unrooted the phone first before i updated. Now it bootloops, and I cant go into recovery.

justdrew said:
I received a msg to perform an ota now the phone won't boot
Click to expand...
Click to collapse
Have a look here:
http://forum.xda-developers.com/zenfone2/general/firmware-update-2-18-40-12-release-date-t3127193

OK I was able to get into recovery via this link http://www.asus.com/support/FAQ/1006346
Do I then do the factory reset wipe/data option ? Im currently doing this.. but its just sitting there at "Wiping data formatting/data..." Not sure if this will progress or just stay there?

boot in recovery, do factory reset wipe/data then wipe cache and just wait, otherwise try erase cache via fastboot

katsikoskulo said:
boot in recovery, do factory reset wipe/data then wipe cache and just wait, otherwise try erase cache via fastboot
Click to expand...
Click to collapse
i did erase the cache first though.. I'm still waiting haha.. Hope this works.

downshift00 said:
i did erase the cache first though.. I'm still waiting haha.. Hope this works.
Click to expand...
Click to collapse
if eveything fails, download and flash the latest full firmware from the asus site
have a look here: http://www.asus-zenfone.com/2015/04/how-to-flash-asus-zenfone-2.html
has instructions step by step

OK it wiped it, then i went to reboot after it was done.. but its just sitting at the main screen now with the cursor circling.. I guess I have to try the method you listed above, damn.

first give it sometime, it takes some time the 1st reboot.
Patience bro i feel you

Well its not working. So if I use this info http://www.asus-zenfone.com/2015/04/how-to-flash-asus-zenfone-2.html
What is the file that I use with ADB to send to the phone? Which firmware, or whatever file do I use?
katsikoskulo said:
first give it sometime, it takes some time the 1st reboot.
Patience bro i feel you
Click to expand...
Click to collapse

its the latest firmware from here:
http://www.asus.com/Phones/ZenFone_2_ZE550ML/HelpDesk_Download/
or
http://www.asus.com/Phones/ZenFone_2_ZE551ML/HelpDesk_Download/
example: for ZE550ML is the UL-Z008-WW-2.17.40.6-user.zip so you type: "adb sideload UL-Z008-WW-2.17.40.6-user.zip"

OK i did that.. it finished and I cleared cache and rebooted and I'm just waiting on main screen again.... I don't have to flash a recovery IMG file right? I can just sideload that zip file correct?

I'm right there with you on the formatting /data

downshift00 said:
OK i did that.. it finished and I cleared cache and rebooted and I'm just waiting on main screen again.... I don't have to flash a recovery IMG file right? I can just sideload that zip file correct?
Click to expand...
Click to collapse
boot in recovery, update from adb , then adb sideload (name of the firmware).zip

This is what I did. It is still on the boot screen with the circle cursor... It's not working apparently.
katsikoskulo said:
boot in recovery, update from adb , then adb sideload (name of the firmware).zip
Click to expand...
Click to collapse

not able to get twrp in my oneplus 3

i flashed the twrp garak using fastboot once i booted into twrp but when i returned using advanced reboot bam! stock recovery is back ..how to fix it guys i want twrp

Go to fastboot mode and reflash the twrp recovery.

CyberCaptainKaz said:
Go to fastboot mode and reflash the twrp recovery.
Click to expand...
Click to collapse
i tried bro but after rebooting my device when i boot into recovery it again changes into oxygen recovery

try to force decryption and then re-flash it again. It's easiest if you use the OnePlus toolkit available here: http://forum.xda-developers.com/oneplus-3/development/toolkit-oneplus-3-toolkit-unlock-t3398799
I was having the same issue after going back to official OOS and wanting to switch over to my current rom which gave me issues since I didn't have modified TWRP.

The_Symbiote said:
try to force decryption and then re-flash it again. It's easiest if you use the OnePlus toolkit available here: http://forum.xda-developers.com/oneplus-3/development/toolkit-oneplus-3-toolkit-unlock-t3398799
I was having the same issue after going back to official OOS and wanting to switch over to my current rom which gave me issues since I didn't have modified TWRP.
Click to expand...
Click to collapse
will it wipe everything means apps,internal storage ?

kriss singhania said:
will it wipe everything means apps,internal storage ?
Click to expand...
Click to collapse
Yes it will. The toolkit will allow you to perform a full backup that you can restore later.
You can try flashing twrp from the toolkit, to see if it works. In my experience it didn't work until I forced decryption.

Try:
1. Fastboot erase recovery
2. Fastboot flash recovery "TWRP"

Puddi_Puddin said:
Try:
1. Fastboot erase recovery
2. Fastboot flash recovery "TWRP"
Click to expand...
Click to collapse
sure I'll try it

kriss singhania said:
sure I'll try it
Click to expand...
Click to collapse
it worked bro I'm rooted and installed twrp..thnx

Damn, this helped me out as well.

I think you are using the community build?