So I've searched around, cant find any straight answer. Also only found old, un-maintained threads.
Anyways heres the problem, When I call people most of the time they cant hear me, but I can hear them, This only happens on anything thats not a stock rom, I'd stick with a stock rom, but they seem sluggish, and hog battery life compared to most custom roms w/kernals. The first thing I thought of was a faulty phone(this was befor the newer phone with unlocked bootloaders) Now I got the same phone(same model, different phone) with unlocked bootloaders. But Im running into the same issue. I've reviewed my APN settings, got the set to what they need to be. The only thing I can come to a conclusion to is the Baseband, I cant seem to find a baseband that works on my current setup, which is CM9 with a freexperia kernal. The kernal i found through the installation instructs for the cm9. So anyone got any input on this? I'd really appreciate some help.
I've been playing with this for the past week now. I have the same issue.
From what I've gathered it's a baseband issue. I've gotta find the link back but you need to flash the correct stock baseband to get everything working. I'll list exactly what I did to get mine working.
EDIT:
Ok found the link.
http://forum.xda-developers.com/showthread.php?t=1759544
What I did was flash R800i 4.0.2.A.0.58 EnhancedV2 firmware which I found here
http://www.mediafire.com/?s93d99wisca54es
Then I flashed only the Baseband from here, only 2 boxes should be checked. See below. Only the FTF file. You can flash the other file if you want but it seems to be working fine without it.
http://dl.dropbox.com/u/27760326/Baseband -36 with libs for Xperia PLAY.rar
Next flash your Kernel. I'm currently using DoomKernel and I'm gonna try out LuPuSv5-GB.
Then go Ahead and flash your rom. I haven't tested many roms yet but thus far I've had no issues with True Ancestor.
In the next few days I'm going to try NTX rom. Then I'm gonna try out Jelly Bean, CM10, with this to see if it works. Thus far I've only tested this with TA so test what you want.
Edit: Seems to be working on everything I try!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please give Thanks where credit is due!
Archfeind2 - For digging
romcio47 - The Baseband
---------- Post added at 05:30 PM ---------- Previous post was at 04:47 PM ----------
Let me know if this works for you!
hmmm.
GTDarthYoda said:
I've been playing with this for the past week now. I have the same issue.
From what I've gathered it's a baseband issue. I've gotta find the link back but you need to flash the correct stock baseband to get everything working. I'll list exactly what I did to get mine working.
EDIT:
Ok found the link.
http://forum.xda-developers.com/showthread.php?t=1759544
What I did was flash R800i 4.0.2.A.0.58 EnhancedV2 firmware which I found here
http://www.mediafire.com/?s93d99wisca54es
Then I flashed only the Baseband from here, only 2 boxes should be checked. See below. Only the FTF file. You can flash the other file if you want but it seems to be working fine without it.
http://dl.dropbox.com/u/27760326/Baseband -36 with libs for Xperia PLAY.rar
Next flash your Kernel. I'm currently using DoomKernel and I'm gonna try out LuPuSv5-GB.
Then go Ahead and flash your rom. I haven't tested many roms yet but thus far I've had no issues with True Ancestor.
In the next few days I'm going to try NTX rom. Then I'm gonna try out Jelly Bean, CM10, with this to see if it works. Thus far I've only tested this with TA so test what you want.
Edit: Seems to be working on everything I try!
Please give Thanks where credit is due!
Archfeind2 - For digging
romcio47 - The Baseband
---------- Post added at 05:30 PM ---------- Previous post was at 04:47 PM ----------
Let me know if this works for you!
Click to expand...
Click to collapse
Will give this a shot, sorry for the late reply. Was away dealing with the birth newborn son =]
well so far so good! now i just need to get some sleep, then make a series of phone calls! >
Semparo said:
Will give this a shot, sorry for the late reply. Was away dealing with the birth newborn son =]
Click to expand...
Click to collapse
Semparo said:
well so far so good! now i just need to get some sleep, then make a series of phone calls! >
Click to expand...
Click to collapse
Congrats and good luck!
Related
Link to cyanogenmod forums where we can vote for cm9 on the nitro.
http://forum.cyanogenmod.com/topic/42080-please-port-cyanogenmod-to-lg-nitro-hd/
go to vote,we need CM9 for P930
wonderful! voted! I hope they will make a move.
Until LG releases an unlocked bootloader, there isn't much CM can do.
LiViD said:
Until LG releases an unlocked bootloader, there isn't much CM can do.
Click to expand...
Click to collapse
Hm? The bootloader isn't locked.
---------- Post added at 09:53 PM ---------- Previous post was at 09:48 PM ----------
baviskar said:
Link to cyanogenmod forums where we can vote for cm9 on the nitro.
http://forum.cyanogenmod.com/topic/42080-please-port-cyanogenmod-to-lg-nitro-hd/
Click to expand...
Click to collapse
OK, what gave you the idea we do devices by vote? We simply do devices we own.
LiViD said:
Until LG releases an unlocked bootloader, there isn't much CM can do.
Click to expand...
Click to collapse
The bootloader IS unlocked.
O.O did you see the post by ciwrl (a moderator on the CM forums)? https://plus.google.com/115049428938715274412/posts/3BkoqMyn4kw
Looks like we will be getting a CWM that works properly soon... oh and its the touch version!
If the bootloader wasn't locked, we'd have a CM ROM for this device already. I don't know where you guys get your details from. Just because the partitions can be hacked, doesn't mean we can upload a new ROM from scratch to these phones. That's the purpose of having an unlocked bootloader. CWM doesn't work for **** without it, as many people have said.
I'm not sure where you get your information from but our CWM works fine for flashing ROMs and creating and restoring nandroids. The only thing broken is the way permissions are set on the /data partition when restoring a nandroid, formatting /data or "fixing permissions", this leads to bootloops because the system needs to write to /data upon bootup and can't. This can be worked around using adb commands from CWM to clear /data.
Since the head moderator at CM forums ported Touch CWM to our phone (http://forum.cyanogenmod.com/topic/...o-lg-nitro-hd/page__view__findpost__p__296221) I am sure they will get past that speed bump soon.
Well we'll have to see if it will work on the SU640 as well as the P930. I tried one persons' P930 ROM and it nearly bricked my SU640. I'm so wishing that I stuck with HTC....
Well well well, looky here Looks like something major is happening! I hope that is not just images on the phone!
https://plus.google.com/u/0/115049428938715274412/posts/5opZQ7UomCJ
I am very ecstatic!!! I can't wait, please tell me it's true!
Just as I thought; We may need different ROM's for the Optimus LTE and the Nitro HD...
It sure looks real to me - now to figure out where he uploads his code so that we can start getting early builds of the software...
CM9 ,DONE !
u should take a look here...
https://plus.google.com/u/0/115049428938715274412/posts
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Are you referencing the link to github. Now to figure out what to grab...
Funny how he makes a post about the P930, and then everyone else floods him with requests for nearly every P9xx model. I'd hate to be that guy right now...
LiViD said:
Funny how he makes a post about the P930, and then everyone else floods him with requests for nearly every P9xx model. I'd hate to be that guy right now...
Click to expand...
Click to collapse
Ahaha was thinking the same thing
Sent from my LG-P930 using xda premium
Agreed, but you think anyone that has developed for cyanogenmod for any length of time is used to it.
arcee just posted an update. He got the radio working.
LiViD said:
Funny how he makes a post about the P930, and then everyone else floods him with requests for nearly every P9xx model. I'd hate to be that guy right now...
Click to expand...
Click to collapse
True, But if i'm not mistaken, he does do several LG phones while working on the P930 as well, thus maybe all the requests lol.
---------- Post added at 05:49 AM ---------- Previous post was at 05:46 AM ----------
Malnilion said:
arcee just posted an update. He got the radio working.
Click to expand...
Click to collapse
Yup, here's the pic for ppl too lazy to go to his G+ page:
btw Mal, who's arcee?
aquariuz23,
That's one of his usernames listed on his about page on G+, a play on the pronunciation of his initials.
Sent from my LG-P930 using Tapatalk
AT&T official ics release
http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP930/AATTKT/V20c_00/V20c_00.kdz
Happy flashing
Not rootable right now
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
yea yea yea!!!!
can't control my anxiety !!!
thanks for the news !
Is it compatible with LG Nitro HD from AT&T?
Cant download. Please reupload it.
-ReaL- said:
Is it compatible with LG Nitro HD from AT&T?
Cant download. Please reupload it.
Click to expand...
Click to collapse
you need small server running WITHOUT the ""127.0.0.1 csmg.lgmobile.com"" line in hosts file !
read machzelet's guide on how to setup hosts and all !
---------- Post added at 09:42 PM ---------- Previous post was at 09:26 PM ----------
@ho!no! : after flashing please report back whether it is rootable and can we go back to other roms !
also if there are any complications while flashing or so !
thanks a lot !
aaki_rocker said:
you need small server running WITHOUT the ""127.0.0.1 csmg.lgmobile.com"" line in hosts file !
read machzelet's guide on how to setup hosts and all !
---------- Post added at 09:42 PM ---------- Previous post was at 09:26 PM ----------
@ho!no! : after flashing please report back whether it is rootable and can we go back to other roms !
also if there are any complications while flashing or so !
thanks a lot !
Click to expand...
Click to collapse
still 2 hours of download left (31% done)
i will report later, i have to go lunch with my wife and i never know how much time it take so ....
Real life happen lol
30 mins left. i will share it.
HO!NO! said:
still 2 hours of download left (31% done)
i will report later, i have to go lunch with my wife and i never know how much time it take so ....
Real life happen lol
Click to expand...
Click to collapse
If I try dloading it on the phone, it just gives a bunch of random characters.
Sent from my LG-P930 using xda premium
AT&T is releasing the official on July 31. So pumped!
Sent from my LG-P930 using xda app-developers app
Download from Yandex
Download from Google
So, how should I flash it if I have CM10 flashed now ? Unbrick? Not again, plz
HO!NO! said:
Bell official ics release
http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP930/AATTKT/V20c_00/V20c_00.kdz
Happy flashing
I don't have flash yet and i don't know if it rootable downloading right now.
I can't believe Bell release it before at&t....
Click to expand...
Click to collapse
and AT&T comes out july 31st my question is I have basically your leaked version but for the locked bootloader nitro of ics...so will i need to downgrade back to att stock rom and if so what rom if any links out there i should use for att stock rom, I will search as well but just incase someone knows offhand i would appreciate it thanks.
talrune said:
and AT&T comes out july 31st my question is I have basically your leaked version but for the locked bootloader nitro of ics...so will i need to downgrade back to att stock rom and if so what rom if any links out there i should use for att stock rom, I will search as well but just incase someone knows offhand i would appreciate it thanks.
Click to expand...
Click to collapse
Use the unbricking guide, it has all the stock nitro HD stuff.
I have install this rom on LG Nitro HD And i Have stock AT&T ROM now
what languages does it has? does it has russian?)
yuranet said:
I have install this rom on LG Nitro HD And i Have stock AT&T ROM now
Click to expand...
Click to collapse
wicked cool !! :good:
-ReaL- said:
what languages does it has? does it has russian?)
Click to expand...
Click to collapse
English, Spanish, French, and three language characters. Don't have Russian language.
I think it is AT&T firmware, not Bell!!!
yuranet said:
I have install this rom on LG Nitro HD And i Have stock AT&T ROM now
Click to expand...
Click to collapse
is it rootable? :good:
Most importantly, imo, is whether it has a locked bootloader.
scott0 said:
is it rootable? :good:
Click to expand...
Click to collapse
^ this !!
So i was trying to help my friend with their note 2 they got from AT&T, all we wanted to do was to update it to the latest version of android.
Steps taken:
rooted it via exynos exploit
installed mobile odin
installed clockwork mod
all was working fine untill we used mobile odin and flashed the wrong version of android to it the n7105 not the i317 version.
It booted up fine then after a reboot it is now stuck on the logo screen (see pic)
I want to recover it to complete factory settings now.
The thing is it cant get into recovery mode OR download mode.
i can get it reconised in device manager as a samsung phone but other than that, nothing working. Could someone point me in the right direction to get this fixed?
If i get it fixed tonight i will happily donate beer money!
Please help me!
Tom
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Did you try hitting volume up, home and power button(all while powered off) to get into recovery. I personally use twrp, but presume it might be the same for cwm
---------- Post added at 05:44 AM ---------- Previous post was at 05:36 AM ----------
Also check out the toolkit for the note 2. Here:
http://forum.xda-developers.com/showthread.php?t=2052779
You should be able to figure it out from there, you can flash images via adb (while connected to your computer).
This is my signature , There are Many like it, But this one is mine
can you get it to download mode? i havent seen a phone yet that would let you get to the "samsung screen" ..and be totally bricked.
you can try making a jig although i am not sure if it works on our phones..you will have to search ..easy to make ... $1.00 at radio shack for resistors!!
here is a site http://galaxynote2root.com/galaxy-n...ootunbrick-galaxy-note-2-with-stock-firmware/
dont know if im allowed to post a link to outside source?
mejori said:
can you get it to download mode? i havent seen a phone yet that would let you get to the "samsung screen" ..and be totally bricked.
you can try making a jig although i am not sure if it works on our phones..you will have to search ..easy to make ... $1.00 at radio shack for resistors!!
here is a site http://galaxynote2root.com/galaxy-n...ootunbrick-galaxy-note-2-with-stock-firmware/
dont know if im allowed to post a link to outside source?
Click to expand...
Click to collapse
If he flashed a n7105 rom he wouldn't have the "stock firmware" that the guide you posted requires
This is my signature , There are Many like it, But this one is mine
For some reason, ive managed to get it into download mode! huge sucess!
the battery was pretty low when i was doing this, its been plugged in for a while so it may have fixed it.
I just need to install a stock rom or a custom rom now.
could anyone point me in the right direction of a stock 'samsung' oem 4.1.2 version? perhaps with no at&T branding?
Would be greatfull!
A_Richie said:
If he flashed a n7105 rom he wouldn't have the "stock firmware" that the guide you posted requires
This is my signature , There are Many like it, But this one is mine
Click to expand...
Click to collapse
a link to all the stock firmwares are provided in that tutorial!
im not here to win ..here to hlep!
---------- Post added at 06:21 AM ---------- Previous post was at 06:20 AM ----------
iceghost1210 said:
For some reason, ive managed to get it into download mode! huge sucess!
the battery was pretty low when i was doing this, its been plugged in for a while so it may have fixed it.
I just need to install a stock rom or a custom rom now.
could anyone point me in the right direction of a stock 'samsung' oem 4.1.2 version? perhaps with no at&T branding?
Would be greatfull!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1987541
sorry too many to chose from..look through and pick one that suits you.. just take your time and read everything twice!!
iceghost1210 said:
For some reason, ive managed to get it into download mode! huge sucess!
the battery was pretty low when i was doing this, its been plugged in for a while so it may have fixed it.
I just need to install a stock rom or a custom rom now.
could anyone point me in the right direction of a stock 'samsung' oem 4.1.2 version? perhaps with no at&T branding?
Would be greatfull!
Click to expand...
Click to collapse
And here is where my usefulness ends, I have the sprint version and thus don't really have any opinions/ideas for a good stock rom for at&t.
This is my signature , There are Many like it, But this one is mine
Ahh, great. Ill have a read around and follow instructions this time.
ill post back if i can get this all sorted!
Thanks all for help so far.
mejori said:
a link to all the stock firmwares are provided in that tutorial!
im not here to win ..here
Just saw that alot of people were asking for firmware links in the comments...tbh I just grazed over the article lol. Wasnt trying to be a forum troll.
It was just the lack of sleep, and my familiarity with the "Oh no I screwed my phone up, and I was going to try to go to bed early tonight, but instead I have to be up all night finding a fix for it" emotion I'm sure Tom was going through ha
This is my signature , There are Many like it, But this one is mine
Click to expand...
Click to collapse
no worries .. ive been in his shoes(not literally i dont have a shoe fetish) ..scary as hell!!:crying:
haha
Its getting late here in australia and my friends are moving back to their country in the morning here so this is why i was in a rush lol.
Just got to wait for this dam hotfile download to finish... 4 hours to go on download!
Lol. Good luck. Is Australian Internet that bad? Or its probably because all the mirrors are so far away
This is my signature , There are Many like it, But this one is mine
Internet here is 1.2MBps... its pretty bad.
downloading from hotfile as i guess im not a premium user at: 59.7KBps.
really bad...
Hi,
This is my first post in XDA. I'm pretty sure there are similar posts regarding my issue but none of them have solved my problem. My friend gave me his SGS3 T999 (T-Mobile). But the camera won't work, I just get the following message:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I've already tried the following:
1. Flash stock rom
2. Tried other camera apps
3. Tested both front and back cameras with *#0*# USSD code
It may be related but the Accelorometer doesn't work either.
Checked the firmwares:
Rear Camera
Cam FW Ver: GDFD06
Phone FW Ver: GDFI02
Front Camera:
Cam&Phone FW Ver: S5K6A3
I have a hunch, would it be possible to change the camera's firmware verson? That's the only thing I haven't tried so far. I read somewhere that the problem started when they updated the firmware.
You cant manually update the camera firmware anymore. They blocked this in 4.1.2, so you'd have to go back to 4.1.1, but you probably already have newer cam firmware than you'd get doing that. Did it work when you ran the test?
Might want to consider replacing the camera. Pretty cheap part online.
DocHoliday77 said:
You cant manually update the camera firmware anymore. They blocked this in 4.1.2, so you'd have to go back to 4.1.1, but you probably already have newer cam firmware than you'd get doing that. Did it work when you ran the test?
Might want to consider replacing the camera. Pretty cheap part online.
Click to expand...
Click to collapse
I don't think it's a hardware issue. I tested both the front and back camera but both of them just get the same error message.
Look in /system/cameradata for a file that has your cam firmware in the name. If its not there, that's probably the cause. If it is there, im not sure...
DocHoliday77 said:
Look in /system/cameradata for a file that has your cam firmware in the name. If its not there, that's probably the cause. If it is there, im not sure...
Click to expand...
Click to collapse
I've tried experimenting with the files in cameradata and found in some threads that dropping a ZH.bin file might fix the issue. but it hasn't after doing so.
When I tried removing the GD.bin file though, it stops crashing the camera but there's still no picture from the lens.
Only other thing I can think to try is to flash the full stock firmware via Odin, then factory reset and test. (This will wipe internal sd fyi)
I'm thinking of replacing the front and back cameras.
I was only able to find parts for shv-e210s/k (korean model), would it be okay to use these parts for the T999?
Probably, as long as they're for the S3. Did you check http://etradesupply.com ? They ship from both hong kong and the US and im quite certain they have the exact parts you'll need.
---------- Post added at 01:42 PM ---------- Previous post was at 01:39 PM ----------
They're pretty cheap too, so even if it doesn't fix it, you shouldn't be out much money.
I dont recall if it was mentioned, and I don't have a clue if it'd work or not, but you could try flashing a 4.1.1 rom, then use the dialer codes to get to the cam firmware menu, and choose phone to cam f/w write. Its the last thing I could think to try....
DocHoliday77 said:
Probably, as long as they're for the S3. Did you check http://etradesupply.com ? They ship from both hong kong and the US and im quite certain they have the exact parts you'll need.
---------- Post added at 01:42 PM ---------- Previous post was at 01:39 PM ----------
They're pretty cheap too, so even if it doesn't fix it, you shouldn't be out much money.
I dont recall if it was mentioned, and I don't have a clue if it'd work or not, but you could try flashing a 4.1.1 rom, then use the dialer codes to get to the cam firmware menu, and choose phone to cam f/w write. Its the last thing I could think to try....
Click to expand...
Click to collapse
Just to give you an update on what has happened so far..
I replaced my faulty front-facing camera, figured it was since the proximity sensor wasn't working.
So right now I am 100% sure that the front-facing camera is working but I still get the same Camera Failed error after testing it through the *#0*# menu. RIght now I'm downloading the 4.1.1 firmware and hoping that this http://forum.xda-developers.com/showthread.php?t=2625461 will help me downgrade.
After that, fingers crossed that using the phone/cam fw write will work.
Id be very, very, very cautious about doing that. If any part of it doesn't work quite right you'll hard brick for sure.
If it were me, I'd try just the 4.1.1 rom first and only do that process as a last resort. I am curious if it would actually work, but I dont want to see anyone brick to try figuring it out!
DocHoliday77 said:
Id be very, very, very cautious about doing that. If any part of it doesn't work quite right you'll hard brick for sure.
If it were me, I'd try just the 4.1.1 rom first and only do that process as a last resort. I am curious if it would actually work, but I dont want to see anyone brick to try figuring it out!
Click to expand...
Click to collapse
Good news is, the downgrade worked.
But the Phone to CAM FW Write is still grayed out and camera isn't working.
After everything I did, I think it's safe to assume that it's the motherboard.
Well its cool to see that that actually worked for downgrading! Ill have to look into it a bit more I suppose. Sorry to hear it didn't help though. If you want to look into it, you can find motherboards for sale on ebay most of the time. Just watch out for blacklisted ones.
I have seen a few of these threads, but nothing solid enough to grant a solution.
As you see below, I am getting constant signal drops, and it happens even where there is flawless reception.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So far I've read these suggestions:
-- Flash new Kernel
-- Flash stock rooted ROM then flash back
Any thoughts?
I am currently on Task's Latest (6-28) ROM, but have been experiencing this on previous ones (4.4.3 + 4.4.2).
leeroyjenks said:
I have seen a few of these threads, but nothing solid enough to grant a solution.
As you see below, I am getting constant signal drops, and it happens even where there is flawless reception.
So far I've read these suggestions:
-- Flash new Kernel
-- Flash stock rooted ROM then flash back
Any thoughts?
I am currently on Task's Latest (6-28) ROM, but have been experiencing this on previous ones (4.4.3 + 4.4.2).
Click to expand...
Click to collapse
Task's latest is 7-9 I believe.
That being said, Is your phone unlocked?
Also, does your baseband match your bootloaders?
BWolf56 said:
Task's latest is 7-9 I believe.
That being said, Is your phone unlocked?
Also, does your baseband match your bootloaders?
Click to expand...
Click to collapse
Oops, guess I didn't check Task for the past few days.
Phone is unlocked.
Baseband and Bootloader are both I747UCDLK3
leeroyjenks said:
Oops, guess I didn't check Task for the past few days.
Phone is unlocked.
Baseband and Bootloader are both I747UCDLK3
Click to expand...
Click to collapse
Did this start happening after unlocking? It sounds like your nv file might be damaged.
If so, you might need this http://forum.xda-developers.com/showpost.php?p=43842387
BWolf56 said:
Did this start happening after unlocking? It sounds like your nv file might be damaged.
If so, you might need this http://forum.xda-developers.com/showpost.php?p=43842387
Click to expand...
Click to collapse
No. This started happening maybe about a month or two ago. I unlocked it over a year ago. I have a feeling it was when i switched to a 4.4 rom. Unfortunately i didn't notice right away so i can't pinpoint the cause
Sent from awesomeness
leeroyjenks said:
No. This started happening maybe about a month or two ago. I unlocked it over a year ago. I have a feeling it was when i switched to a 4.4 rom. Unfortunately i didn't notice right away so i can't pinpoint the cause
Sent from awesomeness
Click to expand...
Click to collapse
You can try flashing another modem. If that doesn't work, might wanna try flashing back to stock, test it and work your way back up if all is well.
BWolf56 said:
You can try flashing another modem. If that doesn't work, might wanna try flashing back to stock, test it and work your way back up if all is well.
Click to expand...
Click to collapse
:good: Let's try that. Will get back with the results once I end up doing it in the next day or so.
BWolf56 said:
You can try flashing another modem. If that doesn't work, might wanna try flashing back to stock, test it and work your way back up if all is well.
Click to expand...
Click to collapse
Flashing the modem again did nothing to fix.
One question before I flash the stock ROM, will I need to do anything besides flashing? I'm not sure how it goes, since it is an older version (4.0.3 I believe?).
I know I need to do it in Odin, but nothing else besides that. Flashing an AOSP ROM after that won't be a problem?
Sorry for the questions, just wanna make sure before trying this out.