i'm trying install cm9 or miui 4 or aokp but am running into a problem where i can't flash anything from cwm bundled with cm7. i'm doing these exact steps as stated here in Part 1:
with calk's el29 installed (with Rogue 1.1.2 based off cwm 5.0.2.7), i booted into recovery and wiped data except for battery stats. i flashed cm7 from here. i immediately booted into cm7, then immediately rebooted back into cwm recovery. from here, i tried flashing cm9, miui 4, aokp alpha 1, and aokp alpha 2. they all fail saying "E: can't open /sdcard/romname.zip (bad) Installation aborted."
what am i doing wrong?
I would flash cm7 again, boot, then reboot into recovery again and try to flash another ics ROM. Just make sure to remember not to wipe data until after you flash an ics ROM and gapps
Sent from my SPH-D710 using Tapatalk
Back in the vibrant days (tmobile galaxy s) if you had any problems with flashing the "fix" was to start all over via Odin and a rooted stock ROM...
Dunno if that is something that is still a good idea to do.. But worth a try...
paranoid android85 said:
I would flash cm7 again, boot, then reboot into recovery again and try to flash another ics ROM. Just make sure to remember not to wipe data until after you flash an ics ROM and gapps
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
i've tried aokp and miui4. no bueno. in fact, it wont flash anything i have, including calk's wipe all script.
Bear gri11z said:
Back in the vibrant days (tmobile galaxy s) if you had any problems with flashing the "fix" was to start all over via Odin and a rooted stock ROM...
Dunno if that is something that is still a good idea to do.. But worth a try...
Click to expand...
Click to collapse
tried that like 4 times lol. i'm actually gonna try copying all the ics roms onto my sdcard again, this time from within android itself. all the roms had been transferred over while usb was mounted in cwm and i noticed the transfers would pause at times or not complete at all, forcing me to start them over. perhaps that's the problem.
I have a question:
I'm presently runningthe Nocturnal Venum AOKP rom (which is awesome
I might add) but this question actually has impications on all the
ICS 4.03 & 4.04 roms. After Flashing the rom and whatever else you
flash through the EL26 CWM(5.027) based kernel and rebooting you
loose that CWM and must get CWM from the Play Store.
My question is this; Say I want to flash a new modem must I Odin
the EL26 kernel http://forum.xda-developers.com/showthread.php?t=1514665
using the method per kbizzle and then flash new modem and reflash
ICS kernel? This is important to know as the only unrecoverable brick I
have manufactured is with the flashing that goes between gingerbread
based recovery to ICS rom and attenpting to go back. I admit I'm a 50
something year old noob with building pc's as my experience before
getting into the android game so I wont pretend I'm something I'm
not! I have flased better than 100 roms and am learning more with
each possible bricking roll of the dice flashing I do and I have
bricked my share. Is their a CWM in the works for flashing modems
and so on in the works? Any help will be greatly appreciated!
to flash a modem, simply flash the .bin file in Odin. no need to use recovery and it doesn't add to the Odin count.
DO NOT USE CWM FROM THE PLAY STORE!!!!
Odin el26 cwm, clear dalvik cache, flash whatever mod you're wanting to flash, flash AOSP ICS kernel, reboot.
worked like a charm
I was having the same problem flashing modems on Nocturnal Venum. Didnt know we had to flash the kernel along with it. Needless to say working great now
It would be in your best interest to flash using ODIN. You won't have to go back to a GB kernel to flash a modem with ODIN.
You can flash with CWM, but I wouldn't in the AOKP/AOSP situation you're in.
Flashing new ICS modem
OK cnstarz,
That's what I needed to know and appreciate your prompt response! You raise another question which is was using or wanting to use CWM for nandroid backup but as it wouldn't flash modem, the nandroid backup is also out of the question. I plan on using the rom I'm on now as a daily driver but like to try others out and know that I have to basically Odin back to gingerbread to either try another gingerbread rom or to do another ICS rom. So, my guess is I have no nandroid option or is there?
Again thanks for your help.
Ok I'm flashing AOKP for the first time I need help, I'm on GB and want to flash AOKP is there anything I should do first such as update modems or oanything? Also how do I safely flash it without bricking my phone? THANKS!
Flashing Process
You're on gb Rom with root access right?
You don't need to worry about the modem, it doesn't factor into flashing the AOKP Rom.
To flash this Rom you will need to
1) Download the Rom and gapps onto your phone from Times' AOKP page (internal or SD shouldn't matter)
2) Then odin or mobile odin the StockCWM-EL26.tar.md5 which is found here
http://www.mediafire.com/?u0hs65d1utb3fe4
3) Then you need to reboot into recovery
Edit: Note that this should be CWM 5.0.2.7
4) wipe data/factory reset
5) wipe cache
6) wipe dalvik cache
(some people recommend wiping several times)
7) install the AOKP.zip file
8) Install the gapps
9) Reboot and enjoy.
Note that on this build it seems to take a few minutes to work itself onto your phone, so don't panic initially if the Rom runs a little slow, it will speed up.
Also before you do anything make sure you read the OP several times, and make sure you understand what you're doing. This process should work but as always I'm not responsible if anything happens, you do this at your own risk... but really relax you'll probably be fine, it looks like you've at least flashed the GB Roms before.
EDIT: Also the process is going to be pretty much identical to how QBking77 installs CM in this video, except you will use the AOKP zip and the newer gapps.
http://www.youtube.com/watch?v=Vu1PQoqq7cY&list=PL6B97247164921053&index=123&feature=plpp_video
U might want to worry more about going back to gb as that is where most bricks happen. As long as u follow AOKP instructions ur OK...if u wanna go back or switch, just make sure it is done via the el26 kernel w cmw or any other kernel approved for safe flashing on ics. Avoid rogue recovery ones (worked great before but were not aware of emmc bug).
Sent from my SPH-D710 using xda app-developers app
I have been looking around for about an hour or two trying to find a solid tutorial on how to install a custom recovery to install new Roms. I flashed my phone onto Virgin Mobile on FH13. It seems to me that there is more than meets the eye to installing a recovery on this phone. I really don't want to mess anything up at all. Could anyone guide me the right way as to how I can get CWM on my phone? I appreciate any help you can give me. Thanks!
Recovery is packed into the kernel on this phone. Flash a kernel tar through ODIN if you want, it will trigger the yellow triangle though. If your already rooted you could use Mobile ODIN. If you already have some form of custom recovery and are just trying to switch up you can flash the kernel zip in recovery.
rwilco has pretty much every kernel for every purpose but since your on stock you will either want a repacked stock or custom tw kernel - http://rwilco12.androidfilehost.com/?dir=Kernels/Recovery Kernels/ICS
If your unfamiliar then keep asking questions. Our phone has a bug in its eMMC firmware triggered during format operations on the stock kernel as of Android 4.0. The specifics are detailed but all you really need to know is grab a kernel with a safe recovery, or even going as far as AGAT's custom kernel which has more work around in place to prevent a factory reset or rom install from turning your phone into a super brick.
RainMotorsports said:
Recovery is packed into the kernel on this phone. Flash a kernel tar through ODIN if you want, it will trigger the yellow triangle though. If your already rooted you could use Mobile ODIN. If you already have some form of custom recovery and are just trying to switch up you can flash the kernel zip in recovery.
rwilco has pretty much every kernel for every purpose but since your on stock you will either want a repacked stock or custom tw kernel - http://rwilco12.androidfilehost.com/?dir=Kernels/Recovery Kernels/ICS
If your unfamiliar then keep asking questions. Our phone has a bug in its eMMC firmware triggered during format operations on the stock kernel as of Android 4.0. The specifics are detailed but all you really need to know is grab a kernel with a safe recovery, or even going as far as AGAT's custom kernel which has more work around in place to prevent a factory reset or rom install from turning your phone into a super brick.
Click to expand...
Click to collapse
Also new to the e4gt, im currently rooted on fh13.
say i want to flash paranoidandroid, which kernel (which includes recovery?) would you recommend?
also this is either flashed from odin (pc) or can be done through mobile odin?
then once kernel is flashed, i can then reboot into recovery, wipe and flash rom/gapps?
sorry for all the questions, just want to make sure!
bongzilla said:
Also new to the e4gt, im currently rooted on fh13.
say i want to flash paranoidandroid, which kernel (which includes recovery?) would you recommend?
also this is either flashed from odin (pc) or can be done through mobile odin?
then once kernel is flashed, i can then reboot into recovery, wipe and flash rom/gapps?
sorry for all the questions, just want to make sure!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1953783
RainMotorsports said:
Recovery is packed into the kernel on this phone. Flash a kernel tar through ODIN if you want, it will trigger the yellow triangle though. If your already rooted you could use Mobile ODIN. If you already have some form of custom recovery and are just trying to switch up you can flash the kernel zip in recovery.
rwilco has pretty much every kernel for every purpose but since your on stock you will either want a repacked stock or custom tw kernel - http://rwilco12.androidfilehost.com/?dir=Kernels/Recovery Kernels/ICS
If your unfamiliar then keep asking questions. Our phone has a bug in its eMMC firmware triggered during format operations on the stock kernel as of Android 4.0. The specifics are detailed but all you really need to know is grab a kernel with a safe recovery, or even going as far as AGAT's custom kernel which has more work around in place to prevent a factory reset or rom install from turning your phone into a super brick.
Click to expand...
Click to collapse
My phone already has root. Everything else is stock. 4.0.4, build FH13, with no custom recoveries.
I don't understand what you mean in your second paragraph with "repacked stock" or "custom tw kernel".
I am completely lost as to where I should be going. My plan is to install this rom: http://goo.im/devs/Shabbypenguin/E4GT-Nightlies
How would I go around to getting this on my phone?
Also, what about this rom: http://forum.xda-developers.com/showthread.php?t=1810315
I am not sure which rom runs the fastest and most efficient. There are so many kernels for so many things, I have absolutely no idea which kernel to flash and how to flash it.
EDIT: So I have done some more reading up and I THINK I can starting to understand some of it. I assume the steps are to:
1. Install Mobile Odin Lite on my phone.
2. Flash the EL26 kernel on Odin Lite. Link to kernel: http://forum.xda-developers.com/showthread.php?t=1662295 (first kernel on the page)
3. This part I am kinda lost. Not sure if that kernel installed a new recovery or not. I assume I just reboot and go into recovery.
4. Nandroid a backup of my ICS stock that is on now? Can I even go back to this stock backup after putting on a new Rom? Which kernel would I need to install backup of stock?
5. Wipe data, dalvic, and install new Rom using instruction it came with. My problem is I want to run this Rom: http://goo.im/devs/Shabbypenguin/E4GT-Nightlies and it has no instructions. I assume you just wipe data and dalvic?
6. flash Rom, then flash Gapp? It doesn't have a link for any of the Gapps, so either I have to find a link to download Gapp or that rom already comes with it? Not sure.
7. Reboot into new Rom? Not sure if I missed a step or not.
Another question I have is with the kernels. Can I just leave it on the EL26 kernel for daily use of the phone? Say I want to install maybe cm10 next, do I just keep it on EL26?
Sorry for the spam of questions. I like to be 100% certain.
Best bet if your trying to install CM9 is to go to the EL26 CWM kernel as all of the AOSP rom instructions dictate. Using the EL26 kernel means your phone will only boot to Download and Recovery as it will only boot gingerbread roms.
Download the nightly you want to the device and then flash the EL26 CWM kernel in Mobile ODIN. After its all over with you might need to battery pull if you messed up booting into recovery and then boot into recovery (power + vol up). Install the rom. Install gapps. Wipe cache/dalvik but as I will recommend below you should just backup everything and a full wipe.
You can nandroid if you want but it will be making a copy of the ICS rom you have with the EL26 kernel on it so it is literally a restore to the point your starting from not where you were just before that. Its still a good idea if your afraid of losing things. I would use Super Backup from the market to backup your Contacts, Call Logs and MMS. Wipe cache and dalvik and all that. But realisticly you should backup your apps and data if you have Titanium Backup and start fresh just factory reset after your on CM9. Restore your apps with data (no system data) after that. A clean install will present the least of issues, even the Samsung updates from one rom to another are not without issues.
You can not boot anything but gingerbread with EL26 and once you install a rom you will be on the kernel with that rom. So you will have a Linux 3 android kernel with cwm 6 if you go with a CM9 nightly. From there you can flash the next nightly or the next beta etc. Older stuff will not flash from your new setup as AOSP roms have switched to a new device name in the build.prop.
As far as gapps here it is - http://goo.im/gapps/gapps-ics-20120429-signed.zip and don't forget to put this on the device ahead of time or you will have to mount usb and transfer using the pc in recovery.
RainMotorsports said:
Best bet if your trying to install CM9 is to go to the EL26 CWM kernel as all of the AOSP rom instructions dictate. Using the EL26 kernel means your phone will only boot to Download and Recovery as it will only boot gingerbread roms.
Download the nightly you want to the device and then flash the EL26 CWM kernel in Mobile ODIN. After its all over with you might need to battery pull if you messed up booting into recovery and then boot into recovery (power + vol up). Install the rom. Install gapps. Wipe cache/dalvik but as I will recommend below you should just backup everything and a full wipe.
You can nandroid if you want but it will be making a copy of the ICS rom you have with the EL26 kernel on it so it is literally a restore to the point your starting from not where you were just before that. Its still a good idea if your afraid of losing things. I would use Super Backup from the market to backup your Contacts, Call Logs and MMS. Wipe cache and dalvik and all that. But realisticly you should backup your apps and data if you have Titanium Backup and start fresh just factory reset after your on CM9. Restore your apps with data (no system data) after that. A clean install will present the least of issues, even the Samsung updates from one rom to another are not without issues.
You can not boot anything but gingerbread with EL26 and once you install a rom you will be on the kernel with that rom. So you will have a Linux 3 android kernel with cwm 6 if you go with a CM9 nightly. From there you can flash the next nightly or the next beta etc. Older stuff will not flash from your new setup as AOSP roms have switched to a new device name in the build.prop.
As far as gapps here it is - http://goo.im/gapps/gapps-ics-20120429-signed.zip and don't forget to put this on the device ahead of time or you will have to mount usb and transfer using the pc in recovery.
Click to expand...
Click to collapse
Ah, I read it twice and now it makes more sense. I have a pretty good idea of what to do now.
Put rom and gapp on phone, install EL26, backup, full wipe, flash rom and gapp, rom will install new kernel for me, then just reboot.
Last question, I just want to make sure. What exactly is a full wipe on this phone. I have done plenty of full wipes on the evo 4g. I am just asking because I hear some people have problems when they do a full wipe.
I really appreciate your help. Thank you!
Sorry if I jumbled everything together in my post by the I was running out the door. But this Hurricanne has stopped that and I regret not taking my time.
Well what I mean is a factory reset which formats /Cache and /Data. When you install the rom its going to format /System prior to writing the new firmware/rom. /Data has all your user apps, their data and your information etc. This does not wipe the Internal SD or the External SD though at times a line saying it was does come up in CWM.
Just don't do a Factory reset on the stock kernel you are on now, its fine on EL26 its fine on the kernels that come with the CM9 nightlies. Super Backup apparently does app's now too. I have never used it since I have Titanium Backup Pro but figured its also worth mentioning.
A note on turning back. As I said before if you flash the EL26 CWM kernel you wont be able to boot the ICS rom installed on the phone. At that point to go back instead of forward you can flash the FH13 kernel in desktop ODIN or the zip in CWM and you will have the FH13 kernel instead of EL26 and be back where you were. But once you flash the EL26 CWM kernel your goal at that point is flashing your rom of choice in CWM and not things like booting the phone.
You should be "okay" coming from a dirty install just wiping cache. But you may never know if a problem your having is the rom or some left over data unless you go clean and factory reset. Its a choice and its also a choice you can make later as you can always reset later. I would back up anything important first before doing any of this. Not so much a worry about bricking, as just about any normal situation will be recoverable, but more so to the point of if you have to wipe the phone and start from scratch.
RainMotorsports said:
Sorry if I jumbled everything together in my post by the I was running out the door. But this Hurricanne has stopped that and I regret not taking my time.
Well what I mean is a factory reset which formats /Cache and /Data. When you install the rom its going to format /System prior to writing the new firmware/rom. /Data has all your user apps, their data and your information etc. This does not wipe the Internal SD or the External SD though at times a line saying it was does come up in CWM.
Just don't do a Factory reset on the stock kernel you are on now, its fine on EL26 its fine on the kernels that come with the CM9 nightlies. Super Backup apparently does app's now too. I have never used it since I have Titanium Backup Pro but figured its also worth mentioning.
A note on turning back. As I said before if you flash the EL26 CWM kernel you wont be able to boot the ICS rom installed on the phone. At that point to go back instead of forward you can flash the FH13 kernel in desktop ODIN or the zip in CWM and you will have the FH13 kernel instead of EL26 and be back where you were. But once you flash the EL26 CWM kernel your goal at that point is flashing your rom of choice in CWM and not things like booting the phone.
You should be "okay" coming from a dirty install just wiping cache. But you may never know if a problem your having is the rom or some left over data unless you go clean and factory reset. Its a choice and its also a choice you can make later as you can always reset later. I would back up anything important first before doing any of this. Not so much a worry about bricking, as just about any normal situation will be recoverable, but more so to the point of if you have to wipe the phone and start from scratch.
Click to expand...
Click to collapse
That clarified a lot, thanks.
So I did it all. I did a factory reset from the new kernel. did dalvic also. I installed the new rom and gapp. Problem is that once I reboot, it shows the Galaxy SII screen, then goes into a black screen. I can't turn it back on again, so I remove the battery and it can restart. Does the same thing though. I followed your instruction and http://e4gtcm.blogspot.com/p/cm9-install-guide.html
What did I do wrong? I am worried I messed up my phone completely.
EDIT: So I went back into recovery and it was now a new version of CWM. I did everything over again; factory reset, cache, dalvic, and it is doing the same thing. Boots up "Galaxy SII" screen, then a black screen. It seems to still be on in the black screen seeing that it doesn't "turn" on again. I can hold if for 15 second or so for it to reset and does the same thing. Why is there a black screen?
Sorry for not checking back. Your probably freaking right now lol but relax your at a good point everything is fine.
Either a bad download or the nightly you went with happens to be a baddy. I am still on 10/20 I was gonna flash 10/28 today but the weather is screwing with me. goo.im seems pretty slow today.
Download another, battery pull and hold vol up + power until it hits recovery then go into mounts and mount usb storage hook a usb cable to the pc and copy over another build. I would say try 10/20 just because it works pretty good but that won't stop another bad download in which case you have to try try again.
Worst case from here we can just odin you back to stock rooted FH13 or your choice of other. Your phone is fine from what you have told me so far. I can upload one of the builds I have if you think ti would help any.
RainMotorsports said:
Sorry for not checking back. Your probably freaking right now lol but relax your at a good point everything is fine.
Either a bad download or the nightly you went with happens to be a baddy. I am still on 10/20 I was gonna flash 10/28 today but the weather is screwing with me.
Download another, battery pull and hold vol up + power until it hits recovery then go into mounts and mount usb storage hook a usb cable to the pc and copy over another build. I would say try 10/20 just because it works pretty good but that won't stop another bad download in which case you have to try try again.
Worst case from here we can just odin you back to stock rooted FH13 or your choice of other. Your phone is fine from what you have told me so far.
Click to expand...
Click to collapse
Phew! I was pretty positive that I could still get back to something working, just my paranoid self was getting tense. I got 10/28. I guess I will do 10/20. Do you know what the other updates have? I would hate to install something that isn't working its most efficient.
Again, thank you so much. You were of great help! Good luck with the weather issue. Hope you're safe!
I stopped following chris's experimentals so i am not sure what the most recent focuses have been. The Nightlies have whatever code was commited. They are built automatically and can range from very stable to not booting at all. I dont have any of the links on me but someone can get it to you. Reading commits is not exactly 100% user friendly especially if your not a developer. But they often have clues. I would follow the CM9 Beta thread and the CM9 User Support Threads - http://forum.xda-developers.com/showthread.php?t=1874374 and http://forum.xda-developers.com/showthread.php?t=1720771
I used to DL nightlies from work over 3g or 4g all the time and would get a bad dl and end up in situations where even my experienced self felt like I couldn't fix it till I got home and always got the phone running within an hour without the assistance of a near by pc.
I am uploading 10/20 to my server just in case its in Chicago so if your away from the weather it should be unaffected for the most part. Glad its not in NY anymore.
EDIT - http://android.rainmotorsports.net/10-20-CM9-d710-KANG.zip the md5 hash as I have it is 66246125ACDBEF2EBF2144E0CBFEBB7B and it matches the md5 listed on goo.im
RainMotorsports said:
I stopped following chris's experimentals so i am not sure what the most recent focuses have been. The Nightlies have whatever code was commited. They are built automatically and can range from very stable to not booting at all. I dont have any of the links on me but someone can get it to you. Reading commits is not exactly 100% user friendly especially if your not a developer. But they often have clues. I would follow the CM9 Beta thread and the CM9 User Support Threads - http://forum.xda-developers.com/showthread.php?t=1874374 and http://forum.xda-developers.com/showthread.php?t=1720771
I used to DL nightlies from work over 3g or 4g all the time and would get a bad dl and end up in situations where even my experienced self felt like I couldn't fix it till I got home and always got the phone running within an hour without the assistance of a near by pc.
I am uploading 10/20 to my server just in case its in Chicago so if your away from the weather it should be unaffected for the most part. Glad its not in NY anymore.
EDIT - http://android.rainmotorsports.net/10-20-CM9-d710-KANG.zip the md5 hash as I have it is 66246125ACDBEF2EBF2144E0CBFEBB7B and it matches the md5 listed on goo.im
Click to expand...
Click to collapse
I just got it downloaded. It is now up and running perfectly. I appreciate all your help man, thanks a bunch. I live in Washington state. So the weather wont affect me.
Good evening all. I hope this is the right forum to post my question about recovery for my e4g touch. I recently rooted my phone and my phone is currently on the fi27 build. Is there a recovery i can put on there now to go ahead and start flashing ruins, or will i have to wait for qbkng77 to post his video on you tube on putting cwm recovery on fi27 rooted e4g touch? Thanks in advance for the help!
Sent from my SPH-D710 using xda app-developers app
n1stunna84 said:
Good evening all. I hope this is the right forum to post my question about recovery for my e4g touch. I recently rooted my phone and my phone is currently on the fi27 build. Is there a recovery i can put on there now to go ahead and start flashing ruins, or will i have to wait for qbkng77 to post his video on you tube on putting cwm recovery on fi27 rooted e4g touch? Thanks in advance for the help!
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
I assume you do the same thing as I did. Get the EL26 kernel and flash it with Mobile Odin. I would wait on someone else to confirm that though.
Another really quick question. I want to overclock my phone. I tried using setcpu and the overclocker it came with. It only goes to a max of 1200 but I know it can go higher. I am guessing I need another kernel. What kernel can I use?
joshlete said:
Another really quick question. I want to overclock my phone. I tried using setcpu and the overclocker it came with. It only goes to a max of 1200 but I know it can go higher. I am guessing I need another kernel. What kernel can I use?
Click to expand...
Click to collapse
You either need a kernel with built in over clock support(you'd see the CPU slider go up to 1400-1600 automatically if it was). Or a kernel that supports over locking in tegrak, which you "load over clock module" with in tegrak.
Both Kuban kernel and some of Agats kernels have built in support, mine you need to use tegrak as I have not added built in yet
You can get them all in rwilco's (awesome) kernel repository stickied in development
Sent from my SPH-D710 using xda premium
I have some questions and need help fast if possible. I'm currently on CM10 beta 2 and only have a nandroid backup from being stock rooted. I know you can't simply restore a backup from jelly bean to ICS. I was playing with ROM Toolbox, and was installing some custom transitions. I did a backup of the stock transitions, but the zip backup file won't flash in recovery. Anyway I can't boot up and only get the Galaxy S II boot screen. I can however get into download and CM CWM based recovery. I've done quite a few searches, with no real answers for this issue. Any help will be greatly apreciated because I don't have my phone until I figure out exactly what to do. Do I have to download a stock ROM with cusom kernel to computer then transfer over file via usb using Odin and then use CWM to flash the stock ROM? I know not to do a factory wipe unless I'm on el26 or 29. I also know you can odin to them then flash, but all the odin kernels with CWM are from ICS and I can't find a solid method for my specific situation.
jtadak said:
I have some questions and need help fast if possible. I'm currently on CM10 beta 2 and only have a nandroid backup from being stock rooted. I know you can't simply restore a backup from jelly bean to ICS. I was playing with ROM Toolbox, and was installing some custom transitions. I did a backup of the stock transitions, but the zip backup file won't flash in recovery. Anyway I can't boot up and only get the Galaxy S II boot screen. I can however get into download and CM CWM based recovery. I've done quite a few searches, with no real answers for this issue. Any help will be greatly apreciated because I don't have my phone until I figure out exactly what to do. Do I have to download a stock ROM with cusom kernel to computer then transfer over file via usb using Odin and then use CWM to flash the stock ROM? I know not to do a factory wipe unless I'm on el26 or 29. I also know you can odin to them then flash, but all the odin kernels with CWM are from ICS and I can't find a solid method for my specific situation.
Click to expand...
Click to collapse
Flash any one of the stock full roms using this - http://forum.xda-developers.com/showthread.php?t=1903252 Preferably flash official builds.
BluesRulez said:
Flash any one of the stock full roms using this - http://forum.xda-developers.com/showthread.php?t=1903252 Preferably flash official builds.
Click to expand...
Click to collapse
Thanks Blues.
jtadak said:
Thanks Blues. But I need to flash el29 or six before flashing right? So I'm guessing I need to Odin to one? And I can do that from any ICS or JB right? So I just need the one click for PC Odin, then flash with Odin? Sorry, I just want to be 100% here.
Click to expand...
Click to collapse
Use the one click.exe full rom file that will flash the full el29 gb rom. Then from there you can flash cwm to flash cm10 or whatever rom you want.
But do I have to go el29 or 26? How do I get there from where I'm at now? Thanks again, and sorry I just want to be 100% here.
Edit: Okay, great. After flashing that I obviously could do my nandroid restore? Just because I lost some pictures or something happened when I flashed to JB because I only had a few pics and none of my SMS or call logs or anything came through.
Ok, just so the thread is not a complete waste, I did flash the stock ROM via PC ODIN. Went back to stock, was able to do a nandroid restore, and went ahead and flashed CWM recovery via Mobile ODIN. Went ahead and wiped factory in CWM recovery and flashed CM10. Thanks again Blues, next time I'll just post in your noob thread. . I'm not a noob but I just never had to PC ODIN when not being able to boot and wasn't sure how safe it was in my specific state.
P.S. Any other users are more than welcome to P.M. me if you have any questions. I probably won't visit here again
Sent from my SPH-D710 using xda premium