I found USB tethering to my laptop with wifi works fine but 3G does not. With 3G tethering I can connect but no data is transferred.
Same problem with 3G hotspot - no data is transferred.
I have read this 3G tethering problem is common for certain devices, particularly with Sony.
Has anyone else experienced this problem or have any ideas what the problem is?
In case relevant:
HTC Wildfire S A510b
Android 2.3.5
Virgin Mobile
just a thought - could this be caused by the APN settings?
The 3G internet works fine on the phone.
I tried my sim card in another phone and 3G tethering worked fine.
And I tried another sim card in my phone and 3G tethering didn't work.
So common factor is this phone.
hoju_ said:
I tried my sim card in another phone and 3G tethering worked fine.
And I tried another sim card in my phone and 3G tethering didn't work.
So common factor is this phone.
Click to expand...
Click to collapse
You have a SIM card? Are you in the US?
I'm in Australia. (most countries use SIM cards)
But problem seems to be the phone, not the SIM card.
hoju_ said:
I'm in Australia. (most countries use SIM cards)
But problem seems to be the phone, not the SIM card.
Click to expand...
Click to collapse
Well yes but in the US the phone is CDMA (no SIM), that is why I asked since you did not state what country.
With the US version Virgin disabled tethering on the phone, not sure if they did it there too.
Is your phone rooted? If so then you might could re-enable that function.
ah OK.
Phone is not rooted. I tried superoneclick but root failed.
That is very interesting some phones have tethering disabled.
Is there a way to check whether this is the case?
hoju_ said:
ah OK.
Phone is not rooted. I tried superoneclick but root failed.
That is very interesting some phones have tethering disabled.
Is there a way to check whether this is the case?
Click to expand...
Click to collapse
I know that hot spot is disabled in the build.prop but am not sure if that would also disable tethering. If you was rooted then you could copy you system folder so I could look at it to see.
Check with a local cell shop and see if they can unlock your cell with a XTC-Clip.
Phone is already unlocked, just not rooted.
HTC support said I needed to install HTC Sync on my computer to get 3G tethering working. Does that sound right?
I can't test because HTC Sync only supports Windows, which I don't have.
hoju_ said:
Phone is already unlocked, just not rooted.
HTC support said I needed to install HTC Sync on my computer to get 3G tethering working. Does that sound right?
I can't test because HTC Sync only supports Windows, which I don't have.
Click to expand...
Click to collapse
You might need the modem drivers for you OS to get the tethering to work. I will test this weekend to see since I never used tethering but have and do use hot-spot.
I experience the same problem for both 3G tethering and 3G hotspot - connects but no data transfer. And wifi tethering works, so I assumed it was not a driver problem.
Would it be worth trying a tethering app in case the problem is with the builtin software?
hoju_ said:
I experience the same problem for both 3G tethering and 3G hotspot - connects but no data transfer. And wifi tethering works, so I assumed it was not a driver problem.
Would it be worth trying a tethering app in case the problem is with the builtin software?
Click to expand...
Click to collapse
Can you copy you build.prop and pm it to me?
How would you recommend extracting the build.prop?
I understand it is located in /system/build.prop, but when mounting the phone on my computer this folder is not available.
I installed some build.prop editor apps where I can view particular properties, but they did not have a feature to copy the file elsewhere.
hoju_ said:
How would you recommend extracting the build.prop?
I understand it is located in /system/build.prop, but when mounting the phone on my computer this folder is not available.
I installed some build.prop editor apps where I can view particular properties, but they did not have a feature to copy the file elsewhere.
Click to expand...
Click to collapse
You should be able to use Es File Explorer or Explorer copy it to your sdcard folder then get thru you computer.
awesome - Explorer worked well. Here is the build.prop:
Code:
ro.ril.oem.ecclist=112,000,911
ro.ril.enable.a52=0
ro.ril.enable.a53=0
ro.ril.hsdpa.category=8
ro.ril.hsxpa=1
ro.ril.fast.dormancy.rule=0
ro.ril.radio.svn=2
ro.ril.disable.mcc.filter=1
ro.ril.emc.mode=1
ro.ril.disable.fd.plmn.prefix=23402,23410,23411,23420
ro.ril.enable.sdr=0
ro.ril.oem.show.act=1
ro.ril.enable.r8fd=0
ro.com.google.clientidbase=android-htc
ro.com.google.clientidbase.yt=android-htc
ro.com.google.clientidbase.am=android-telstra-au
ro.com.google.clientidbase.vs=android-htc
ro.com.google.clientidbase.gmm=android-htc
ro.com.google.clientidbase.ms=android-htc
ro.ril.vmail.50501=+61101
ro.product.model=HTC Wildfire S A510b
# begin build properties
# autogenerated by buildinfo.sh
ro.aa.rid=673
ro.cwkey=TELST001
ro.aa.skulist=841
ro.aa.customizationid=394070
ro.onecid=
ro.aa.mainsku=841
ro.aa.taskid=271810
ro.aa.report=com
ro.aa.romver=2.26.841.4
ro.aa.maincid=TELST001
ro.aa.modelid=PG7612000
ro.aa.project=Marvel_S
ro.aa.cidlist=TELST001
ro.com.google.clientidbase=android-htc
ro.build.id=GRJ90
ro.build.display.id=GRJ90
ro.build.version.incremental=362953.4
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.5
ro.build.date=五 7月 13 18:54:53 CST 2012
ro.build.date.utc=1342176893
ro.build.type=user
ro.build.user=
ro.build.host=ABM018
ro.build.tags=release-keys
ro.product.model=htc wildfire s a510e
ro.product.brand=telstra_wwe
ro.product.name=htc_marvel
ro.product.device=marvel
ro.product.board=marvel
ro.product.cpu.abi=armeabi
ro.product.manufacturer=HTC
ro.product.locale.language=mdpi
ro.product.locale.region=
ro.wifi.channels=
ro.board.platform=msm7k
# ro.build.product is obsolete; use ro.product.device
ro.build.product=marvel
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=2.26.841.4 CL362953 release-keys
ro.build.description=2.26.841.4 CL362953 release-keys
ro.build.changelist=362953
ro.product.ua=
ro.build.fingerprint=telstra_wwe/htc_marvel/marvel:2.3.5/GRJ90/362953.4:user/release-keys
ro.build.project=Marvel_S:271810
ro.product.version=2.26.841.4
keyguard.no_require_sim=1
# end build properties
#
# system.prop for device
#
rild.libpath=/system/lib/libhtc_ril.so
# RilLibPath for Ganlite by Godel_Chen
rild.libpath.ganlite=/system/lib/librilswitch.so
rilswitch.vendorlibpath=/system/lib/libhtc_ril.so
rilswitch.ganlibpath=/system/lib/libganril.so
ro.ril.hep = 1
ro.ril.enable.dtm = 0
ro.ril.hsdpa.category = 8
# Modify MMS APN retry timer from 5s to 2s.
ro.gsm.2nd_data_retry_config = max_retries=3, 2000, 2000, 2000
wifi.interface = eth0
ro.ril.htcmaskw1.bitmask = 4294967295
ro.ril.htcmaskw1 = 14449
# Time between scans in seconds. Keep it high to minimize battery drain.
# This only affects the case in which there are remembered access points,
# but none are in range.
wifi.supplicant_scan_interval = 15
# density in DPI of the LCD of this board. This is used to scale the UI
# appropriately. If this property is not defined, the default value is 160 dpi.
#ro.sf.lcd_density = 120
ro.sf.lcd_density = 160
ro.com.google.locationfeatures=1
# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number
ro.opengles.version = 131072
dalvik.vm.heapsize=20m
# Default network type
# 0 => WCDMA Preferred.
ro.telephony.default_network = 0
# View configuration for QVGA
view.fading_edge_length = 8
view.touch_slop = 15
view.minimum_fling_velocity = 25
view.scroll_friction = 0.008
# For SD storage insert notification sound
persist.service.mount.playsnd = 0
# For the agps default value
ro.ril.def.agps.mode = 2
# For 7227 projects ,default enable AMR-Wideband ([email protected]: WSD request to disable it by default)
# ro.ril.enable.amr.wideband = 1
# For no auto focus devices
ro.workaround.noautofocus = 1
# default value of brightness
settings.display.brightness=143
# For HSDPA low throughput
ro.ril.disable.power.collapse = 1
# For PDP overlap problem
ro.ril.avoid.pdp.overlap = 1
#
# This file describes the media capabilities and profiles
# using system properties.
#
# Note: The property key and value has some length
# limit as defined by PROPERTY_KEY_MAX and
# PROPERTY_VALUE_MAX, respectively
#
# WARNING: We may not use system properties for specifying
# media capabilities and profiles in the future
#
ro.media.enc.file.format = 3gp,mp4
ro.media.enc.vid.codec = m4v,h263
ro.media.enc.vid.h263.width = 176,640
ro.media.enc.vid.h263.height = 144,480
ro.media.enc.vid.h263.bps = 64000,1600000
ro.media.enc.vid.h263.fps = 1,30
ro.media.enc.vid.m4v.width = 176,640
ro.media.enc.vid.m4v.height = 144,480
ro.media.enc.vid.m4v.bps = 64000,1600000
ro.media.enc.vid.m4v.fps = 1,30
#
# Increase SKIA decode memory capability for progressive jpg file
#
ro.media.dec.jpeg.memcap = 20000000
# try to disable proximity sensor in call by default
#gsm.proximity.enable=false
# For FOTA setting (leave empty value to use default)
ro.htc.checkin.url = http://andchin.htc.com/android/checkin
ro.htc.checkin.crashurl = http://andchin.htc.com/android/crash
ro.htc.checkin.url_CN = http://andchin.htccomm.com.cn/android/checkin
ro.htc.checkin.crashurl_CN = http://andchin.htccomm.com.cn/android/crash
ro.htc.checkin.exmsg.url = http://fotamsg.htc.com/android/extra/
ro.htc.checkin.exmsg.url_CN = http://fotamsg.htccomm.com.cn/android/extra/
ro.htc.appupdate.url = http://apu-chin.htc.com/check-in/rws/and-app/update
ro.htc.appupdate.url_CN = http://apu-chin.htccomm.com.cn/check-in/rws/and-app/update
ro.htc.appupdate.exmsg.url = http://apu-msg.htc.com/extra-msg/rws/and-app/msg
ro.htc.appupdate.exmsg.url_CN = http://apu-msg.htccomm.com.cn/extra-msg/rws/and-app/msg
# Release Bluetooth HW/SW information
ro.bt.chipset = Broadcom BCM4329-B1
ro.bt.version = Bluetooth 2.1 + EDR
ro.bt.stack = Broadcom BTL-A
ro.bt.stack.version = 2.2.017
#0x10000010010100100000011 represent bt profile list
ro.bt.profiles = 4270339
# Properties of BTLA stack
service.brcm.bt.activation = 0
service.brcm.bt.srv_active = 0
service.brcm.bt.hcid_active = 0
service.brcm.bt.btld = 0
service.brcm.bt.btld_pid = 0
service.brcm.bt.avrcp_pass_thru = 0
service.brcm.bt.avrcp_toggle = 1
# AOLC
htc.audio.alc.enable = true
# Following property will be reference by Settings.
ro.product.processor=600MHz
ro.product.ram=512MB
ro.product.display_resolution=3.2 inch HVGA resolution
ro.product.main_camera=5M
ro.product.front_camera=NA
ro.product.bluetooth= 3.0
ro.product.wifi = 802.11 b/g/n
# update the acoustic table for Buzz NEL lab testing
ro.ril.update.acoustic.table = 1
# For opensense sdk
ro.htc.common.version = 2.1.0.0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.setupwizard.mode=OPTIONAL
ro.config.ringtone=QuietlyBrilliant.mp3
ro.config.notification_sound=Zeta.mp3
ro.config.alarm_alert=NewDay.mp3
ro.config.cal_notification=Epsilon.mp3
ro.config.msg_notification=Gamma.mp3
ro.setupwizard.mode=DISABLD
ro.com.google.gmsversion=2.3_r7
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
From your build.prop they did not set a disable flag for hot-spot or tether. The only other thing I can suggest is try a different Rom on you device, but backup your current one First.
You can try this:
Code:
adb shell
rm -r /data/local/tmp
ln -s /data/ /data/local/tmp
exit
adb reboot
adb shell
echo 'ro.tether.denied=false' > /data/local.prop
exit
adb reboot
Then try tethering again.
darn, that sounds complicated.
Thanks for checking the build.prop
hoju_ said:
darn, that sounds complicated.
Thanks for checking the build.prop
Click to expand...
Click to collapse
Try this:
Code:
adb shell
rm -r /data/local/tmp
ln -s /data/ /data/local/tmp
exit
adb reboot
adb shell
echo 'ro.tether.denied=false' > /data/local.prop
exit
adb reboot
I understand that adb process requires root.
I tried superoneclick, unlockroot, and unrevoked to try and root the device, but all failed.
Are there other options?
hoju_ said:
I understand that adb process requires root.
I tried superoneclick, unlockroot, and unrevoked to try and root the device, but all failed.
Are there other options?
Click to expand...
Click to collapse
Check this link on CDMA S-OFF.
Related
stewie01 said:
Checking update for 2.05.161.1...
*** FOUND NEW VERSION 3.14.161.1 *** h**p://fotadl.htc.com/OTA_Legend_Froyo_S_Vodafone_UK_3.14.161.1-2.05.161.1_R_release_135177_156984u2k321537x1cpy3d.zip
Checking update for 2.05.163.1...
*** FOUND NEW VERSION 3.14.163.1 *** h**p://fotadl.htc.com/OTA_Legend_Froyo_S_Vodafone_FR_3.14.163.1-2.05.163.1_R_release_135178_156976z7st0ojsytxcijbe.zip
Checking update for 2.05.177.2...
*** FOUND NEW VERSION 3.14.177.1 *** h**p://fotadl.htc.com/OTA_Legend_Froyo_S_Vodafone_AT_GER_Mobilkom_3.14.177.1-2.05.177.2_release_136766_156979h6vst6mdtj4013sm.zip
Click to expand...
Click to collapse
Here are the different versions of Froyo for the HTC Legend - perhaps a Dev can make something out of it
posted in wrong section
Not so wrong ))))
We need it to create the best FROYO rom for HERO....
Perdita2000
^^
m-o-m
~~~~
why is that? we've been waiting for the legend froyo so we can get a better port for the Hero.
my hero is waiting, anxiously, his new sense rom
Yeeesss...come on developers , I can't wait for new froyo sense rom ...GOOD LUCK!!
good find! i'll wait a few days before wearing out my F5 key...
first link dont work anyone have a mirror for the uk one?
link it's ok. Look at lats caracter, before .zip, there are blank space.
ninpo
we need you
System dump,found at 4PDA forum!
http://www.4shared.com/get/ti74Iuwc/dump.html
http://sendfile.su/210521
Ganii said:
System dump,found at 4PDA forum!
http://www.4shared.com/get/ti74Iuwc/dump.html
http://sendfile.su/210521
Click to expand...
Click to collapse
yes!!! thanks!
hope to make a good port
i am waiting for
That`s from "build.prop"
Code:
ro.ril.ecc.VODA-UK=112,911,999
ro.ril.def.agps.mode.VODAP001=1
ro.ril.def.agps.mode.VODAP102=1
ro.ril.def.agps.mode.VODAPE17=1
ro.ril.def.agps.mode.VODAP304=1
ro.ril.enable.a52=0
ro.ril.enable.a53=1
ro.ril.hsdpa.category=8
ro.ril.hsupa.category=5
ro.ril.hsxpa=2
ro.ril.radio.svn=2
ro.ril.disable.fd.plmn.prefix=23402,23410,23411
ro.ril.enable.sdr=0
# begin build properties
# autogenerated by buildinfo.sh
ro.com.google.clientidbase=android-vf-{country}
ro.com.google.clientidbase=android-vf-{country}
ro.build.id=FRF91
ro.build.display.id=FRF91
ro.build.version.incremental=282424
ro.build.version.sdk=8
ro.build.version.codename=REL
ro.build.version.release=2.2
ro.build.date=四 11月 4 22:34:26 CST 2010
ro.build.date.utc=1288881266
ro.build.type=user
ro.build.user=
ro.build.host=AA107
ro.build.tags=release-keys
ro.product.model=HTC Legend
ro.product.brand=vodafone_uk
ro.product.name=htc_legend
ro.product.device=legend
ro.product.board=legend
ro.product.cpu.abi=armeabi
ro.product.manufacturer=HTC
ro.product.locale.language=mdpi
ro.product.locale.region=
ro.wifi.channels=
ro.board.platform=msm7k
# ro.build.product is obsolete; use ro.product.device
ro.build.product=legend
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=3.14.161.1 CL282424 release-keys
ro.build.description=3.14.161.1 CL282424 release-keys
ro.build.changelist=282424
ro.product.ua=
ro.build.fingerprint=vodafone_uk/htc_legend/legend/legend:2.2/FRF91/282424:user/release-keys
ro.build.project=156984
ro.product.version=3.14.161.1
keyguard.no_require_sim=1
# end build properties
#
# system.prop for legend
#
rild.libpath=/system/lib/libhtc_ril.so
# Modify MMS APN retry timer from 5s to 2s.
ro.gsm.2nd_data_retry_config = max_retries=3, 2000, 2000, 2000
wifi.interface = tiwlan0
# Time between scans in seconds. Keep it high to minimize battery drain.
# This only affects the case in which there are remembered access points,
# but none are in range.
wifi.supplicant_scan_interval = 15
# Soft AP interface definition
softap.interface = tiap0
hostapd.status = unloaded
# density in DPI of the LCD of this board. This is used to scale the UI
# appropriately. If this property is not defined, the default value is 160 dpi.
ro.sf.lcd_density = 160
#0 - mdp composition, 1 - gpu composition
ro.sf.hw=1
# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number
ro.opengles.version = 131072
# Default network type
# 0 => WCDMA Preferred.
ro.telephony.default_network = 0
# For the agps default value
ro.ril.def.agps.mode = 2
# For 7227 projects ,default enable AMR-Wideband ([email protected]: WSD request to disable it by default)
# ro.ril.enable.amr.wideband = 1
# For emmc phone storage
ro.phone_storage = 0
#
# This file describes the media capabilities and profiles
# using system properties.
#
# Note: The property key and value has some length
# limit as defined by PROPERTY_KEY_MAX and
# PROPERTY_VALUE_MAX, respectively
#
# WARNING: We may not use system properties for specifying
# media capabilities and profiles in the future
#
ro.media.enc.file.format = 3gp,mp4
ro.media.enc.vid.codec = m4v,h263
ro.media.enc.vid.h263.width = 176,640
ro.media.enc.vid.h263.height = 144,480
ro.media.enc.vid.h263.bps = 64000,1600000
ro.media.enc.vid.h263.fps = 1,30
ro.media.enc.vid.m4v.width = 176,640
ro.media.enc.vid.m4v.height = 144,480
ro.media.enc.vid.m4v.bps = 64000,1600000
ro.media.enc.vid.m4v.fps = 1,30
# For FOTA setting (leave empty value to use default)
ro.htc.checkin.url = http://andchin.htc.com/android/checkin
ro.htc.checkin.crashurl = http://andchin.htc.com/android/crash
ro.htc.checkin.url_CN = http://andchin.htccomm.com.cn/android/checkin
ro.htc.checkin.crashurl_CN = http://andchin.htccomm.com.cn/android/crash
ro.htc.checkin.exmsg.url = http://fotamsg.htc.com/android/extra/
ro.htc.checkin.exmsg.url_CN = http://fotamsg.htccomm.com.cn/android/extra/
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.networklocation=1
ro.setupwizard.mode=DISABLED
ro.config.ringtone=Innovation.mp3
ro.config.notification_sound=Color.mp3
ro.config.alarm_alert=Light.mp3
ro.config.cal_notification=Vector.mp3
ro.config.msg_notification=Ascend.mp3
ro.setupwizard.mode=OPTIONAL
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
ro.com.google.clientidbase=android-vf-{country}
ro.ril.enable.managed.roaming=1
ro.setupwizard.mode=OPTIONAL
ro.com.google.gmsversion=2.2_r7
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
So this means that soon I will have "original" Android 2.2 with HTC Sense UI on my Hero ?
Like:
youtu.be/VycV_QfDc8w
If so, go go devs xD
Hmm, it's going to be interesting to see whether the dev's pick stuff from the Legend ROM and stick them in the already out Gratia ROM, or just do a fresh build.
Dear devs,
Now It's your time to shine! Make all the Hero owners proud of their forgotten phone!
whats taking so long its been at least 12 hours since it hit the net why is it not ported yet lol ;-)
skedone said:
whats taking so long its been at least 12 hours since it hit the net why is it not ported yet lol ;-)
Click to expand...
Click to collapse
dude it is not that simple yet, this 2.2 legend is pretty different than other legends
Working on it.. hard one
i know this might be in the wrong section but can this be ported to our device
http://forum.xda-developers.com/showthread.php?t=1140967
here is the build.prop
PHP:
modules
#
#device supports LTE
ro.config.lte=true
#device supports EHRPD
ro.config.ehrpd=true
#device supports simultaneous 1x voice + LTE
ro.config.svlte1x=true
#-from QCT Fusion
# Default network type.
# 8 => CDMA/EVDO/LTE auto mode preferred.
ro.telephony.default_network=8
wifi.interface=eth0
wifi.supplicant_scan_interval=120
# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number
ro.opengles.version = 131072
# This is a high density device with more memory, so larger vm heaps for it.
# Change to 64m for Sense 3.0 elements
dalvik.vm.heapsize=64m
# For the default value of agps
ro.ril.def.agps.mode = 2
# For emmc phone storage
ro.phone_storage = 0
#
# This file describes the media capabilities and profiles
# using system properties.
#
# Note: The property key and value has some length
# limit as defined by PROPERTY_KEY_MAX and
# PROPERTY_VALUE_MAX, respectively
#
# WARNING: We may not use system properties for specifying
# media capabilities and profiles in the future
#
ro.media.enc.file.format = 3gp,mp4
ro.media.enc.vid.codec = m4v,h263,h264
ro.media.enc.vid.h263.width = 176,1280
ro.media.enc.vid.h263.height = 144,720
ro.media.enc.vid.h263.bps = 64000,6000000
ro.media.enc.vid.h263.fps = 1,30
ro.media.enc.vid.m4v.width = 176,1280
ro.media.enc.vid.m4v.height = 144,720
ro.media.enc.vid.m4v.bps = 64000,6000000
ro.media.enc.vid.m4v.fps = 1,30
ro.media.enc.vid.h264.width = 176,1280
ro.media.enc.vid.h264.height = 144,720
ro.media.enc.vid.h264.bps = 64000,6000000
ro.media.enc.vid.h264.fps = 1,30
# For FOTA setting (leave empty value to use default)
ro.config.htc.nocheckin = 1
# Release Bluetooth HW/SW information
ro.bt.chipset = Broadcom BCM4329-B1
ro.bt.stack = Broadcom BTL-A
ro.bt.stack.version = 2.0.50.032
#0x10000010010100101000011 represent bt profile list
ro.bt.profiles = 4270403
# Properties of BTLA stack
service.brcm.bt.activation = 0
service.brcm.bt.srv_active = 0
service.brcm.bt.hcid_active = 0
service.brcm.bt.btld = 0
service.brcm.bt.btld_pid = 0
service.brcm.bt.avrcp_pass_thru = 0
service.brcm.bt.avrcp_toggle = 1
service.brcm.bt.btport_redir_on = 1
#Welly_Fang
ro.cdma.home.operator.numeric = 310012
ro.cdma.home.operator.alpha = Verizon
ro.htc.device.slot1 = RUIM
# jerry.pj_chen [Start]20100730 For Verizon data retry
ro.cdma.data_retry_config = max_retries=infinite,0,0,60000,120000,480000,900000
ro.com.android.dataroaming = true
# jerry.pj_chen [end]20100730 For Verizon data retry
# For opensense sdk
ro.htc.common.version = 2.0.0.0
# Set Horizontal VVM = true and HorizontalBUA = true for Incredible#C/Lexikon/Mecha Verizon build
# Then Verizon VVM/BuA program can check this property to known if there is a Native VVM/BuA in ROM
ro.HorizontalVVM = false
ro.HorizontalBUA = false
# Properties of Scalado Denoise param.
postprocess.iso_midband = 400
postprocess.denoise_level = 5
# Following property will be reference by Settings.
ro.product.processor = 1GHz
ro.product.ram = 768MB
ro.product.display_resolution = 4.3 inch WVGA resolution
ro.product.main_camera = 8M
ro.product.front_camera = 1.3M
ro.product.bluetooth = 2.1 + EDR
ro.product.wifi = 802.11 b/g/n
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.networklocation=1
ro.setupwizard.mode=DISABLED
ro.config.ringtone=QuietlyBrilliant.mp3
ro.config.notification_sound=Zeta.mp3
ro.config.alarm_alert=NewDay.mp3
ro.config.cal_notification=Epsilon.mp3
ro.config.msg_notification=Gamma.mp3
ro.com.google.gmsversion=2.3_r3
media.a1026.nsForVoiceRec=0
htc.audio.alt.enable=1
htc.audio.hac.enable=1
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
ro.media.codec_priority_thumb=so
dalvik.vm.lockprof.threshold=500
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.toolkit.romversion=Das BAMF Sense 3.0 RC
ro.toolkit.romedition=BAMF Sense 3.0 RC
ro.toolkit.romtype=gingerbread
ro.stats.devname=TeamBAMF
ro.stats.romname=DasBAMF
ro.stats.romversion=2.1
I think this is 2.3.4 when you look at build.prop with a text editor and search for 2.3.4 it comes up twice.
kyleastley said:
i know this might be in the wrong section but can this be ported to our device
http://forum.xda-developers.com/showthread.php?t=1140967
I think this is 2.3.4 when you look at build.prop with a text editor and search for 2.3.4 it comes up twice.
Click to expand...
Click to collapse
But i'm already running 2.3.4
Uploaded with ImageShack.us
After i installed my ARHD on my DHD i have problems with GPS. It's not as accurate as it was with stock ROM, please help !
I've had my DHD for less than a year and also started getting gps issues (long time to fix, low accuracy, only 3 to 4 sats). After trying many roms and many software hacks (gps.conf to gps-status etc.) I started looking at hardware. I noticed that the connections in my gps-antenna cover were wearing out. I ordered a new gps-antenna and replaced it and now it works great again.
Check the post in my sig for a video how to change the gps-antenna (not my video)
we don't have the same problem, when i'm at home my gps shows that i'm in completely different city, but when i'm in the citymall for example it shows correctly...
GPS problem
Hi wrooney, you're not using Google maps 6.03 are you? Coz I had real problems with that and ARHD almost impossible to get a fix. They have updated maps to 6.10 now and that's working fine in my DHD with ARHD 6.31.
i have Maps version 6.0.1 and android revolution HD 6.3.1, now what should i do? somehow manually update maps?
Have you tried AGPS?
http://forum.xda-developers.com/showthread.php?t=1252011
I've been getting upwards of 8 sats and consistency connecting and locking on very quickly. I don't "activate" my GPS until I'm outside or in my car. It seems that helps a ton. I always open up GPS Toolbox before I route as well, so it can download some daily data.
Because at home you can't get GPS
Except if you leave in a tent of course...
Your phone is using 3 localization info: Wifi, GPS and cell towers.
I had exactly the same problem with Celcom in MY.
At home, perfect cell localization.
But in my office I was 50km away.
Wrong configuration of the tower.
To be sure, activate only one of the 3 (WiFi, GPS or data). I think switch of wifi and data as I bet on tower pb. You can also modify this in 'localization config'
Edit: in China, sometime the phone says it's locked on GPS but it put me at more than 50km away.
To solve it I activate data before launching Maps.
As stated before, GPS Status is a good to tool to check the GPS lock. Don't mess to much with pseudo soft to improve GPS... for me it's bul**t.
Good config of gps.conf is enough.
i post them for you as an example. But you have to adapt it for your country, this one is for China.
my gps.conf (zipped for upload)
but you don't get my problem my gps was working perfectly until i installed ARHD
I get your problem... but are you sure you kept the exact same config after flash?
Before I flash a ROM I always replace gps.conf in the zip by the one I attached for ex. I do the same with Maps.apk.
Are you sure that the config of localisation has not been modified between your previous ROM and this one? Are you sure to use the same version of the soft you're using for GPS? Same config of A-GPS.
By flashing the ROM you didn't change the HW and the radio. So the GPS reception has to be the same, only the way data is used is different now.
And last but not least... I can be wrong also. It's just my ideas and problems I encountered.
i don't know how to change the gps.conf, but i would like to try upg maps to lates version first than trying other methods, do you know how can i do that?
Thanks man the GPS.config file fixed my GPS problem
Sent from my Desire HD using xda premium
GPS probs
Attached a copy of Google maps 6.10. And GPS status which should help with fix speed.
i installed google maps and gpsstatus, but still innacuratte... :S
wrooney10 said:
i don't know how to change the gps.conf, but i would like to try upg maps to lates version first than trying other methods, do you know how can i do that?
Click to expand...
Click to collapse
Sorry.. to change gps.conf, just use rootexplorer (or equivalent) and replace the one you have in /system/etc/ (copy paste).
To upgrade maps is more tricky. On some ROM I can't... that's why I replace it before flashing (open the zip with 7zip and replace maps.apk in /system/apps/ with the one you want).
As I get use to it, I always replace these two files in a zip before flashing a rom (+delete apks I don't want, remove all ringtones and notif sounds...). It's easier to tune the zip than doing one by one on the phone.
i have the same problems with the RCMix3d Runny v4.0 i also used the patch of iBotPeaches but it dosen't work. i check the build.prop file and thereisn't anything about the gps, it's normal?
this is my build.prop file, it's normal? i need to write something?
#Edited by JSLEnterprises for RCMIX
ro.ril.ecc.VODA-Africa-South=112,999,911
ro.ril.ecc.HTC-GCC=999,112,997
ro.ril.ecc.HTC-ELL=92,93,94
ro.ril.ecc.HTC-WWE=999
ro.ril.ecc.HTC-Dutch=112
ro.ril.ecc.HTC-FRA=112,911
ro.ril.ecc.HTC-ITA=112,911
ro.ril.ecc.HTC-EastEurope=911
ro.ril.enable.a52.HTC-ITA=1
ro.ril.enable.a53.HTC-ITA=1
ro.ril.enable.amr.wb.HTC__A07=1
ro.phone.min_match.HTC__Y13=7
ro.ril.enable.amr.wb.HTC__Y13=1
ro.ril.enable.amr.wb.HTC__E11=1
ro.ril.enable.amr.wb.HTC__001=1
ro.phone.min_match.HTC__J15=7
ro.phone.min_match.HTC__016=7
ro.ril.enable.a52=0
ro.ril.enable.a53=1
ro.ril.disable.fd.plmn.prefix=23402,23410,23411,23420
ro.ril.enable.sdr=1
ro.ril.enable.amr.wideband=1
ro.com.google.clientidbase=android-htc-rev
ro.ril.vmail.23415=1571,BT
ro.ril.vmail.27203=171
ro.ril.vmail.65502=181
ro.ril.vmail.27211=171
ro.config.htc.enableCOTA=1
# begin build properties
# autogenerated by buildinfo.sh
ro.aa.customizationid=253838
ro.aa.project=Runnymede
ro.aa.romver=1.05.401.4
ro.aa.maincid=HTC__001
ro.aa.cidlist=HTC__001,HTC__E11,HTC__203,HTC__102,HTC__405,HTC__Y13,HTC__A07,HTC__304,HTC__032,HTC__N34,HTC__J15,HTC__016
ro.aa.skulist=401
ro.aa.rid=313
ro.aa.modelid=PD9810000
ro.build.changelist=185058
ro.aa.taskid=221900
ro.aa.mainsku=401
ro.cwkey=HTC__001
ro.com.google.clientidbase=android-htc
ro.aa.customizationid=253838
ro.build.id=GRJ90
ro.build.display.id=GRJ90
ro.build.version.incremental=182513.4
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.5
ro.build.date=三 10月 19 12:08:18 CST 2011
ro.build.date.utc=1318997298
ro.build.type=user
ro.build.user=
ro.build.host=ABM012
ro.build.tags=release-keys
ro.product.model=Desire HD
ro.product.brand=htc_wwe
ro.product.name=htc_ace
ro.product.device=ace
ro.product.board=spade
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=HTC
ro.product.locale.language=hdpi
ro.product.locale.region=
ro.wifi.channels=
ro.board.platform=msm7x30
# ro.build.product is obsolete; use ro.product.device
ro.build.product=runnymede
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=1.05.401.4 CL185058 release-keys
ro.product.ua=
ro.build.fingerprint=htc_europe/htc_runnymede/runnymede:2.3.5/GRJ90/182513.4:user/release-keys
ro.build.project=Runnymede:221900
ro.product.version=RCMix3D Runny v4.0
ro.build.languageremove=0
ro.build.sense.version=3.5
keyguard.no_require_sim=1
# end build properties
#
# system.prop for mahimahi
#
ro.sf.lcd_density=240
debug.fb.rgb565 = 0
# Use GPU for rendering UI
debug.sf.hw=1
rild.libpath=/system/lib/libhtc_ril.so
# Modify MMS APN retry timer from 5s to 2s.
ro.gsm.2nd_data_retry_config = max_retries=3, 2000, 2000, 2000
# ace RF team request
ro.ril.enable.dtm = 1
ro.ril.gprsclass = 12
ro.ril.hsdpa.category = 10
ro.ril.hsupa.category = 6
ro.ril.hsxpa = 2
# Default network type.
# 0 => WCDMA mode preferred.
ro.telephony.default_network = 0
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data_netmgrd_nint=8
wifi.interface=eth0
wifi.supplicant_scan_interval=30
# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number
ro.opengles.version = 131072
# This is a high density device with more memory, so larger vm heaps for it.
dalvik.vm.heapsize=32m
# For the default value of agps
ro.ril.def.agps.mode = 1
# For HSDPA low throughput
ro.ril.disable.power.collapse = 1
# For FOTA setting (leave empty value to use default)
ro.htc.checkin.url = i can't post the url, if you need it write me a pm
ro.htc.checkin.crashurl = i can't post the url, if you need it write me a pm
ro.htc.checkin.url_CN = i can't post the url, if you need it write me a pm
ro.htc.checkin.crashurl_CN = i can't post the url, if you need it write me a pm
ro.htc.checkin.exmsg.url = i can't post the url, if you need it write me a pm
ro.htc.checkin.exmsg.url_CN = i can't post the url, if you need it write me a pm
ro.htc.appupdate.url = i can't post the url, if you need it write me a pm
ro.htc.appupdate.url_CN = i can't post the url, if you need it write me a pm
ro.htc.appupdate.exmsg.url = i can't post the url, if you need it write me a pm
ro.htc.appupdate.exmsg.url_CN = i can't post the url, if you need it write me a pm
# Release Bluetooth HW/SW information
ro.bt.chipset = Broadcom BCM4329-B1
ro.bt.stack = Broadcom BTL-A
ro.bt.stack.version = 2.0.50.032
#0x10000010010100100000011 represent bt profile list
ro.bt.profiles = 4270339
# enable data roaming
ro.com.android.dataroaming = true
# Properties of BTLA stack
service.brcm.bt.activation = 0
service.brcm.bt.srv_active = 0
service.brcm.bt.hcid_active = 0
service.brcm.bt.btld = 0
service.brcm.bt.btld_pid = 0
service.brcm.bt.avrcp_pass_thru = 0
service.brcm.bt.avrcp_toggle = 1
service.brcm.bt.local_name =
# For quick boot mode
persist.sys.shutdown.mode = hibernate
# Vivo China NEL use
ro.ril.update.vivo.acoustic = 1
# Properties of Scalado Denoise param.
postprocess.iso_midband = 400
postprocess.denoise_level = 5
# Following property will be reference by Settings.
ro.product.processor= 1GHz Qualcomm Snapdragon 8255
ro.product.ram= 768MB
ro.product.display_resolution= 4.3" WVGA Screen
ro.product.main_camera= 8 Megapixel
ro.product.front_camera= NA
ro.product.bluetooth= 3.0
ro.product.wifi = 802.11 B/G/N
# For opensense sdk
ro.htc.common.version = 2.1.0.0
# For ext4 file system
ro.ext4fs = 1
# Dump native call stack when an ANR happens to com.htc.launcher.
profiler.anr_dump_native_uid = 9999
# Enable egl profiler
debug.egl.profiler = 1
# Properties for supporting framework features
ro.htc.framework.screencapture = true
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.url.legal= i can't post the url, if you need it write me a pm
ro.url.legal.android_privacy= i can't post the url, if you need it write me a pm
ro.com.google.networklocation=1
ro.setupwizard.mode=DISABLED
ro.setupwizard.mode=OPTIONAL
ro.config.ringtone=QuietlyBrilliant.mp3
ro.config.notification_sound=Zeta.mp3
ro.config.alarm_alert=NewDay.mp3
ro.config.cal_notification=Epsilon.mp3
ro.config.msg_notification=Gamma.mp3
ro.setupwizard.mode=DISABLD
ro.com.google.gmsversion=2.3_r7
media.a1026.nsForVoiceRec=0
htc.audio.alt.enable=1
htc.audio.hac.enable=1
ro.setupwizard.enterprise_mode=1
dalvik.vm.lockprof.threshold=500
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
persist.adb.notify=0
windowsmgr.max_events_per_sec=120
ro.rommanager.developerid=capychimp
ro.modversion=RCMix3D Runny 4.0
Click to expand...
Click to collapse
swazii said:
Thanks man the GPS.config file fixed my GPS problem
Sent from my Desire HD using xda premium
Click to expand...
Click to collapse
Did you modify the conf in any way with your country and continent or did you leave it the way it was?
I got this desire HD because my old mytouch 4g died. It came s-off and rooted. But I am unable to connect to 3g although I can connect to edge. But as you all know edge is really slow. So I tried flashing a radio. But it failed so I checked the boot loader and it had RL at the end of the s-off. So I am suspecting the RL. So does anyone by any chance know what the RL is and wat it stands for?? And how I can get rid of the RL so that it becomes s-off
??
Would be happy if someone could help me out.
Seems strange but everyone keeps complaining of GPS not working.. Well my works even on pacman ROM.
Sent from my Desire HD using xda app-developers app
mickeyasamoah said:
I got this desire HD because my old mytouch 4g died. It came s-off and rooted. But I am unable to connect to 3g although I can connect to edge. But as you all know edge is really slow. So I tried flashing a radio. But it failed so I checked the boot loader and it had RL at the end of the s-off. So I am suspecting the RL. So does anyone by any chance know what the RL is and wat it stands for?? And how I can get rid of the RL so that it becomes s-off
??
Would be happy if someone could help me out.
Seems strange but everyone keeps complaining of GPS not working.. Well my works even on pacman ROM.
Sent from my Desire HD using xda app-developers app
Click to expand...
Click to collapse
Okay this is just my guess so dont quote me on it but Im assuming RL = Radio Locked because when you have this shown in your HBOOT you cant flash a radio
Regardless of the definition im almost certain you want Eng S-Off if your trying to flash a radio via HBOOT. You could either use AAHK2 or depending on you HBOOT version you could look here which helped me gain Eng S-Off
thekool said:
Okay this is just my guess so dont quote me on it but Im assuming RL = Radio Locked because when you have this shown in your HBOOT you cant flash a radio
Regardless of the definition im almost certain you want Eng S-Off if your trying to flash a radio via HBOOT. You could either use AAHK2 or depending on you HBOOT version you could look here which helped me gain Eng S-Off
Click to expand...
Click to collapse
Wow!! Thanks. But I have a problem. I Dont know weather I am having the telsus dhd or normal dhd.
The phone already had a custom ROM before I got it. So how do I check which type I have??
Thanks.
Sent from my Desire HD using xda app-developers app
mickeyasamoah said:
Wow!! Thanks. But I have a problem. I Dont know weather I am having the telsus dhd or normal dhd.
The phone already had a custom ROM before I got it. So how do I check which type I have??
Thanks.
Sent from my Desire HD using xda app-developers app
Click to expand...
Click to collapse
RL stands for relocked, also you can check that by going to about phone and checking software information, most rom devs change the build names and it shows you which one it is.
This is what is there.
I also flashed Eng-hboot today so the RL is gone but after flashing a radio from one the threads, there was still no 3g connection.
Can anyone give me a good radio??
Sent from my Desire HD using xda app-developers app
Also I found a thread and and it said I should have super cid (11111). But when I checked my CIDNUM, mine was CWS__001. what does that mean?
Sent from my Desire HD using xda app-developers app
mickeyasamoah said:
Also I found a thread and and it said I should have super cid (11111). But when I checked my CIDNUM, mine was CWS__001. what does that mean?
Sent from my Desire HD using xda app-developers app
Click to expand...
Click to collapse
Install latest Radio....26.17 I think your problem solve trough latest radio
Sent from my HTC Desire HD using xda premium
MaratabHashmi said:
Install latest Radio....26.17 I think your problem solve trough latest radio
Sent from my HTC Desire HD using xda premium
Click to expand...
Click to collapse
Uhmm what radio is that. Can you give me the full name?? Because I can't find it.
Sent from my HTC Desire HD using xda app-developers app
mickeyasamoah said:
Uhmm what radio is that. Can you give me the full name?? Because I can't find it.
Sent from my HTC Desire HD using xda app-developers app
Click to expand...
Click to collapse
I shared link on my thread...
Sent from my HTC Desire HD using xda premium
MaratabHashmi said:
I shared link on my thread...
Sent from my HTC Desire HD using xda premium
Click to expand...
Click to collapse
Poops, I didn't realise you have posted another one.
Sent from my Desire HD using xda app-developers app
Okay. I appreciate all you guys have done. But just a little heads up. When I go to settings-wireless settings-mobile network- network mode and select WCDMA ONLY, it automatically reverts back to either GSM,WCDMA or GSM ONLY. its like it doesn't want to stay on WCDMA ONLY and search for 3g network. I don't know if you get what I mean.
Sent from my Desire HD using xda app-developers app
Hey. I think I have figured it out.
Okay so here is what I think is causing the problem. I happened to open the build.prop file. And there are many contradictions in it actually in dhd Roms.(comparing it to the build.prop from the mytouch 4g.)
First, the cid number on the build.prop is different from that of the phone.
Second, there is something that has to do with worldwide band and its setted to 0.
Third, the phones cid number is not in the supported cids in the build.prop
Fourth, some settings that have to do with data and 3g are setted differently. And those settings are under the RIL column.
So I am thinking those settings were made to suit those in USA and UK.
So if we were able to modify the build.prop, it might actually work
Here is the build.prop from my current Rom.
ro.ril.ecc.HTC-GCC=999,112,997
ro.ril.ecc.HTC-WWE=999
ro.ril.enable.a52.HTC-ITA=1
ro.ril.enable.a53.HTC-ITA=1
ro.phone.min_match.HTC__Y13=7
ro.phone.min_match.HTC__J15=7
ro.ril.enable.a52=0
ro.ril.enable.a53=1
ro.ril.hsdpa.category=28
ro.ril.hsupa.category=7
ro.ril.hsxpa=2
ro.ril.disable.fd.plmn.prefix=23402,23410,23411,23420
ro.ril.enable.sdr=1
ro.ril.enable.amr.wideband=0
ro.ril.vmail.23415=1571,BT
ro.ril.vmail.27203=171
# Begin build properties
ro.aa.rid=161
ro.aa.skulist=405
ro.aa.customizationid=260999
ro.aa.taskid=225512
ro.aa.project=Ace_Sense30_S
ro.aa.mainsku=401
ro.aa.modelid=PD9810000
ro.aa.romver=3.12.405.1
ro.com.google.clientidbase=android-htc
ro.build.id=GRJ90
ro.build.display.id=GRJ90
ro.build.version.incremental=199157.1
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.5
ro.build.date=四 11月 10 14:54:09 CST 2011
ro.build.date.utc=1320908049
ro.build.type=user
ro.build.user=root
ro.build.host=ABM030
ro.build.tags=release-keys
ro.product.model=Desire HD
ro.product.brand=htc_wwe
ro.product.name=htc_ace
ro.product.device=ace
ro.product.board=spade
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=HTC
ro.product.locale.language=hdpi
ro.board.platform=msm7x30
# ro.build.product is obsolete; use ro.product.device
ro.build.product=ace
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=3.12.405.1 CL199157 release-keys
ro.build.description=3.12.405.1 CL199157 release-keys
ro.build.changelist=199157
ro.build.fingerprint=htc_wwe/htc_ace/ace:2.3.5/GRJ90/$:user/release-keys
ro.build.project=Ace_Sense30_S:225512
ro.product.version=Android Revolution HD 9.0 by mike1986
ro.build.languageremove=0
ro.build.sense.version=3.0
keyguard.no_require_sim=1
# end build properties
#
# system.prop for ace
#
ro.sf.lcd_density=240
debug.fb.rgb565 = 0
rild.libpath=/system/lib/libhtc_ril.so
# RilLibPath for Ganlite by Godel_Chen
rild.libpath.ganlite=/system/lib/librilswitch.so
rilswitch.vendorlibpath=/system/lib/libhtc_ril.so
rilswitch.ganlibpath=/system/lib/libganril.so
# Modify MMS APN retry timer from 5s to 2s.
ro.gsm.2nd_data_retry_config = max_retries=3, 2000, 2000, 2000
# ace RF team request
ro.ril.enable.dtm = 0
ro.ril.gprsclass = 12
ro.ril.hsdpa.category = 10
ro.ril.hsupa.category = 6
ro.ril.hsxpa = 3
# Default network type.
# 0 => WCDMA preferred.
ro.telephony.default_network=0
wifi.interface=eth0
wifi.supplicant_scan_interval=120
# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number
ro.opengles.version = 131072
# This is a high density device with more memory, so larger vm heaps for it.
# Change to 32m, due to 2.3.3 GB already change to 32m
dalvik.vm.heapsize=32m
# For the default value of agps
ro.ril.def.agps.mode = 2
# For HSDPA low throughput
ro.ril.disable.power.collapse = 1
# For Ace China NEL
ro.ril.update.org.acoustic = 1
# For emmc phone storage
ro.phone_storage = 0
# Release Bluetooth HW/SW information
ro.bt.chipset= Broadcom BCM4329-B1
ro.bt.version= Bluetooth 2.1 + EDR
ro.bt.stack= Broadcom BTL-A
ro.bt.stack.version= 2.0.50.032
#0x10000010010100100000011 represent bt profile list
ro.bt.profiles= 4270339
# Properties of BTLA stack
service.brcm.bt.activation = 0
service.brcm.bt.srv_active = 0
service.brcm.bt.hcid_active = 0
service.brcm.bt.btld = 0
service.brcm.bt.btld_pid = 0
service.brcm.bt.avrcp_pass_thru = 0
service.brcm.bt.avrcp_toggle = 1
# For quick boot mode
persist.sys.shutdown.mode = hibernate
# Properties of Scalado Denoise param.
postprocess.iso_midband = 400
postprocess.denoise_level = 5
# Following property will be reference by Settings.
ro.product.processor=1GHz Qualcomm QSD8255
ro.product.ram=768MB
ro.product.display_resolution=4.3" | 480x800 WVGA Resolution
ro.product.main_camera=8Mpx
ro.product.front_camera=NA
ro.product.bluetooth = 3.0
ro.product.wifi = 802.11 b/g/n
# For opensense sdk
ro.htc.common.version = 2.1.0.0
# Properties for supporting framework features
ro.htc.framework.screencapture = true
# Extend key dispatching timeout
keydispatchtimeout = 15000
# ADDITIONAL_BUILD_PROPERTIES
# BUILD.PROP_MODIFIED_BY_MIKE1986_FOR_ANDROID_REVOLUTION_HD
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.networklocation=1
ro.setupwizard.mode=OPTIONAL
ro.config.ringtone=QuietlyBrilliant.mp3
ro.config.notification_sound=Zeta.mp3
ro.config.alarm_alert=NewDay.mp3
ro.config.cal_notification=Epsilon.mp3
ro.config.msg_notification=Gamma.mp3
ro.com.google.gmsversion=2.3_r7
wifi.interface=eth0
ro.opengles.version=131072
media.a1026.nsForVoiceRec=0
media.a1026.enableA1026=1
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
# Additional build.prop tweaks for Android Revolution HD
# Render UI with GPU
debug.sf.hw=1
# Increase overall touch responsiveness
windowsmgr.max_events_per_sec=60
debug.performance.tuning=1
video.accelerate.hw=1
# Disable checkin services, error reporting and logging
ro.config.htc.nocheckin=1
ro.config.nocheckin=1
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# Improve overall media quality
ro.media.enc.jpeg.quality=100
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
# Tweaks for battery saving
pm.sleep_mode=1
# For ext4 file system
ro.ext4fs=1
# Turn on Just In Time in dalvik virtual machine
dalvik.vm.execution-mode=int:jit
# Tweaks identyfication code
ro.ident=Android_Revolution_HD
# EXTRA TWEAKS
# Disable Sending Usage Data
ro.config.nocheckin=1
# Deeper Sleep
pm.sleep_mode=1
# Disable Kernel Error Checking
ro.kernel.android.checkjni=0
ro.ril.gprsclass=12
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.enable.3g.prefix=1
Now give attention to the Ril and the cid.
Now compare it to the mytouch 4g build.prop, its a world wide phone so it works everywhere so it has a worldwide settings
ro.ril.ecc.VODA-Africa-South=112,911,999
ro.ril.ecc.HTC-GCC=999,112,997
ro.ril.ecc.HTC-WWE=999
ro.ril.ecc.HTC-Dutch=112
ro.ril.ecc.HTC-SPA=112, 911
ro.ril.ecc.HTC-FRA=112,911
ro.ril.ecc.HTC-ITA=112,911
ro.ril.ecc.HTC-EastEurope=112
ro.ril.enable.a52.HTC-ITA=1
ro.ril.enable.a53.HTC-ITA=1
ro.phone.min_match.HTC__Y13=7
ro.phone.min_match.HTC__J15=7
ro.phone.min_match.HTC__016=7
ro.ril.enable.a52=0
ro.ril.enable.a53=1
ro.ril.enable.dtm=0
ro.ril.hsdpa.category=10
ro.ril.hsupa.category=6
ro.ril.hsxpa=2
ro.ril.fast.dormancy.rule=1
ro.ril.fast.dormancy.timeout=3
ro.ril.radio.svn=1
ro.ril.disable.fd.plmn.prefix=23402,23410,23411,23420,27202
ro.ril.enable.managed.roaming=1
ro.ril.enable.sdr=1
ro.ril.enable.amr.wideband=1
ro.ril.rxd.mode.nv=10
ro.ril.enable.rxd=1
ro.ril.enable.r8fd=0
ro.com.google.clientidbase=android-htc-rev
ro.ril.vmail.23415=1571,BT,121,VDF UK
ro.ril.vmail.27203=171
ro.ril.vmail.65502=181
ro.ril.vmail.27211=171
ro.ril.vmail.65510=100
ro.ril.vmail.22299=4133,3ITA
ro.ril.vmail.23410=901,O2 UK,905,TESCO,443,giffgaff
ro.ril.vmail.22201=41901,I TIM
ro.ril.vmail.22210=42020,Vodafone IT
ro.ril.vmail.22288=4200,I WIND
ro.product.model=HTC myTouch 4g
ro.config.htc.enableCOTA=1
dev.defaultwallpaper=/system/customize/resource/viper.jpg
dev.deviceimage_large=/system/customize/resource/primo_device_187x370.png
dev.deviceimage_small=/system/customize/resource/primo_device_32x58.png
# begin build properties
# autogenerated by buildinfo.sh
ro.aa.customizationid=407613
ro.aa.project=PRIMO_U_ICS_40A
ro.aa.romver=2.22.401.1
ro.aa.maincid=HTC__001
ro.aa.modelid=PK7610000
ro.aa.cidlist=HTC__001,HTC__E11,HTC__203,HTC__102,HTC__405,HTC__Y13,HTC__A07,HTC__A48,HTC__304,HTC__M27,HTC__032,HTC__016
ro.aa.rid=783
ro.aa.taskid=273801
ro.aa.report=com
ro.aa.skulist=401
ro.aa.mainsku=401
ro.onecid=1
ro.cwkey=HTC__001
ro.com.google.clientidbase=android-htc
ro.build.id=IML74K
ro.build.display.id=IML74K
ro.build.version.incremental=92876.1
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=二 7月 31 16:36:39 CST 2012
ro.build.date.utc=1343723799
ro.build.type=user
ro.build.user=
ro.build.host=ABM018
ro.build.tags=release-keys
ro.product.model=HTC myTouch 4g
ro.product.brand=htc_wwe
ro.product.name=htc_glacier
ro.product.device=glacier
ro.product.board=glacier
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=HTC
ro.product.locale.language=hdpi
ro.wifi.channels=
ro.board.platform=msm7x30
# ro.build.product is obsolete; use ro.product.device
ro.build.product=glacier
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=2.22.401.1 CL92876 release-keys
ro.build.description=2.22.401.1 CL92876 release-keys
ro.build.changelist=92876
ro.build.fingerprint=htc_europe/htc_primou/primou:4.0.4/IML74K/92876.1:user/release-keys
ro.build.characteristics=default
ro.build.project=PRIMO_U_ICS_40A:273801
ro.product.version=ViperTouch 2.1.3
ro.build.languageremove=0
ro.build.sense.version=4.1
keyguard.no_require_sim=1
# end build properties
#
# system.prop for primou
#
ro.sf.lcd_density=240
debug.qctwa.preservebuf = 1
debug.hwc.skipcomposition = 0
debug.fb.rgb565 = 0
rild.libpath=/system/lib/libhtc_ril.so
# RilLibPath for Ganlite by Godel_Chen
rild.libpath.ganlite=/system/lib/librilswitch.so
rilswitch.vendorlibpath=/system/lib/libhtc_ril.so
rilswitch.ganlibpath=/system/lib/libganril.so
# Modify MMS APN retry timer from 5s to 2s.
ro.gsm.2nd_data_retry_config = max_retries=3, 2000, 2000, 2000
# vision RF team request
ro.ril.gprsclass=12
ro.ril.hsdpa.category=10
ro.ril.hsupa.category=6
ro.ril.hsxpa=3
# Default network type.
# 0 => WCDMA preferred.
ro.telephony.default_network=0
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data_netmgrd_nint=8
#
wifi.interface=wlan0
wifi.supplicant_scan_interval=60
wifi.softap.interface=wlan0
wifi.softapconcurrent.interface=wl0.1
# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number
ro.opengles.version = 131072
# This is a high density device with more memory, so larger vm heaps for it.
dalvik.vm.heapsize=128m
dalvik.vm.heapgrowthlimit=48m
# For the default value of agps
ro.ril.def.agps.mode = 2
# For HSDPA low throughput
ro.ril.disable.power.collapse = 1
# Release Bluetooth HW/SW information
ro.bt.chipset= Broadcom BCM4329-B1
ro.bt.stack= Broadcom BTL-A
ro.bt.stack.version= 2.0.50.032
#0x10000010010100100000011 represent bt profile list
ro.bt.profiles= 4270339
# Properties of BTLA stack
service.brcm.bt.activation = 0
service.brcm.bt.srv_active = 0
service.brcm.bt.hcid_active = 0
service.brcm.bt.btld = 0
service.brcm.bt.btld_pid = 0
service.brcm.bt.avrcp_pass_thru = 0
service.brcm.bt.avrcp_toggle = 1
service.brcm.bt.local_name =
# For quick boot mode
persist.sys.shutdown.mode = hibernate
# Properties of Scalado Denoise param.
postprocess.iso_midband = 400
postprocess.denoise_level = 5
#export for SoundHound
persist.htc.audio.pcm.samplerate=44100
persist.htc.audio.pcm.channels=2
# Following property will be reference by Settings.
ro.product.processor = 1 GHz
ro.product.ram = 768MB
ro.product.display_resolution = 4.3 inch WVGA resolution
ro.product.main_camera = 8M
ro.product.front_camera = NA
ro.product.bluetooth = 3.0
ro.product.wifi = 802.11 b/g/n
# For opensense sdk
ro.htc.common.version = 2.1.0.0
# For ext4 file system
ro.ext4fs = 1
# Properties for supporting framework features
ro.htc.framework.screencapture = true
# Extend key dispatching timeout
keydispatchtimeout = 15000
# For QC perf binary hooks
# src:vendor/qcom/proprietary/android-perf/release/lib/<CPU arch>/libqc-opt.so
ro.vendor.extension_library=/system/lib/libqc-opt.so
# For INS phone storage
ro.phone_storage = 0
# To improve APP launch time
persist.htc.multicore.switch=true
persist.htc.multicore.timeout=2000
# For autobot car pc
ro.htc.htcmode.data.path = /dev/ttyHSUSB3
# Disable 3 fingers swipe on primo device
# ro.framework.gestureservice=0
# For long press power key to restart
ro.product.hwreset = 1
# Size of soft heap limit
htc.fw.db.soft_heap_limit=8196
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
drm.service.enabled=true
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=4.0_r5
media.a1026.nsForVoiceRec=0
htc.audio.alt.enable=1
htc.audio.hac.enable=1
htc.audio.global.state=0
htc.audio.global.profile=0
lpa.decode=false
lpa.use-stagefright=false
ro.vendor.extension_library=/system/lib/libqc-opt.so
ro.setupwizard.enterprise_mode=1
ro.service.dpsvr.enabled=true
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
# Kernel Tweaks
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
dalvik.gc.type=precise
dalvik.vm.heapstartsize=5m
dalvik.vm.dexopt-data-only=1
dalvik.vm.verify_bytecode=false
dalvik.vm.jniopts=forcecopy
dalvik.vm.dexopt-flags=m=v,o=y
dalvik.vm.execution-mode=int:jit
#Other Performance Tweaks
ENFORCE_PROCESS_LIMIT=false
debug.gr.swapinterval=0
persist.android.strictmode=0
persist.service.lgospd.enable=0
persist.service.pcsync.enable=0
ro.min_pointer_dur=1
#Media quality improvements
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-record=true
ro.media.enc.jpeg.quality=100
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.hprof.vid.fps=75
video.accelerate.hw=1
# PowerSaver Tweaks
debug.sf.hw=1
# Bravia Engine
ro.service.swiqi.supported=false
persist.service.swiqi.enable=0
# xLoud
ro.semc.sound_effects_enabled=true
ro.semc.xloud.supported=true
persist.service.xloud.enable=1
com.sonyericsson.xloud_enabled=true
xloud_enabled=true
ro.xloud.default_setting=0
# Disable sending data and logging
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
dalvik.vm.checkjni=false
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
debug.performance.tuning=1
ro.config.nocheckin=1
# Disable USB debugging icon on statusbar
persist.adb.notify=0
# Save Some battery
pm.sleep_mode=1
power.saving.mode=1
ro.ril.disable.power.collapse=0
# Remove Ring Delay
ro.telephony.call_ring.delay=1
mot.proximity.delay=25
# Disable HTCs Screenshot feature
ro.htc.framework.screencapture=false
# Disable Bytecode Verification
dalvik.vm.verify-bytecode=false
dalvik.vm.dexopt-flags=v=n,o=v,m=y
# Enable 3 fingers swipe
ro.framework.gestureservice=1
# Softkeybar
qemu.hw.mainkeys=1
# Ui Tweaks
windowsmgr.max_events_per_sec=240
#Default Skin
persist.sys.skin=com.htc.skin.HTC
# Venom OTA
ro.config.venom.enableCOTA=1
ro.config.venom.nocheckin=0
ro.config.venom.noappupdate=0
settings.fota.saveto=cache
ro.venom.support_kernel_change=false
Now steady the two (the ril and cid parts carefully).
Sent from my Desire HD using xda app-developers app
In short :
Lenovo Vibe Shot Z90-7
Current rom : S226 ( android 5.1) Pre-rooted
I need help setting band priority in Phone settings. I would like my phone to constantly look for LTE signal , only connect to 3g in brief periods when not finding LTE and reconnect to LTE as soon as found again.
The problem :
I have signal 2-3-sometimes 4 bars of LTE (2600mhz) however. once it drops for a second or two to Hspa it stays there and doesnt go back to lte. Resetting the modem to regain Lte doesnt always work, sometimes whole phone reboot is necessary. And since my carrier is LTE only (they rent 3g from other T-mobile) They dont like if im on 3g to much. And personally since i pay for 4g and have the signal. I would like to have it.
How i Got here :
I have started my long and unfruitful search after seeing that my internet kept dropping to 3g and staying there (untill i resetted modem)
Unknowingly i followed a guid, entered *#*#INFO#*#* > phone settings > set my phone to USA band. This kinda broke my phone since I live in Europe
Flashed Rom with Root (even bricked and unbricked it twice, but thats another story)
Then after long search i found another guide found here followed the guide and set my band to 46 (aka use all pretty sure thats also what it was like before) And now im pretty much back to where i started. With ofc lots of new learned information. But the same problem that i started with
So my choices are :
Enable all bands and let phone roam on 3g
Or what i did now : with adb shell and AT$QCBANDPREF command : enable all but channel : 9 (gsm 900) , 32 (lte 800) just in case it does work? , 33 (lte 2600) , 38 (wlan 2400)) So now my phone connects to LTE 90% of the time. But certain parts of the city i have no internet and ofc if i ever leave the city chance are high i wont have it there either. Neither are very good choices in my book. But for now i have the least worse one selected :/
*I tried to find Msl code to try to unlock lte bands with some guide. But no. As i understand correctly since its a snapdragon no msl and have to enable via adb fastboot?
*Tried to unlock bands guide found here But since phone doesn't have official root. Just pre-rooted (and cant find any real root) I cannot install the patch and thus QXDM /NV browser wont recognize my phone (everything stays greyed out) /
*And unfortunately the simple solution in androids settings - > mobiele networks - preffered network type : my only option with Lte is : LTE/WCDMA/GSM auto. Not that this matters since i also tried to downgrade to previous rom. and by miracle in previous rom i did have the option that stated 4g preferred. However, it still went back to hspa and stayed there. So no help there either
Im hoping im just thinking to deep and there is a simpler option. At the moment im thinking that maybe its because of the AT$QCBANDPREF command ? That i set the preferred network and soon as it finds one of the preferred network connections it connects and stays with it. (and thus not dropping 3g)
Edit : Build Prop : Im thinking there could be a good chance i can alter/add an option in my build prop to always make it look for a certain lte band? But im drawing a blank what that option would be.
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=LMY47O
ro.build.display.id=Z90a40_S226_151022_ROW
ro.build.version.incremental=Z90a40_S226_151022_ROW
ro.build.version.sdk=22
ro.build.version.codename=REL
ro.build.version.all_codenames=REL
ro.build.version.release=5.1
ro.build.version.security_patch=2015-11-01
ro.build.version.base_os=
ro.build.date=Thu Oct 22 17:59:40 CST 2015
ro.build.date.utc=1445507980
ro.build.type=user
ro.build.user=buildslave
ro.build.host=njbs13
ro.build.tags=release-keys
ro.build.flavor=zoom_row-user
ro.product.model=Lenovo Z90a40
ro.product.brand=Lenovo
ro.product.name=zoom_row
ro.product.device=zoom_row
ro.product.board=msm8916
# ro.product.cpu.abi and ro.product.cpu.abi2 are obsolete,
# use ro.product.cpu.abilist instead.
ro.product.cpu.abi=arm64-v8a
ro.product.cpu.abilist=arm64-v8a,armeabi-v7a,armeabi
ro.product.cpu.abilist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=arm64-v8a
ro.product.manufacturer=LENOVO
ro.wifi.channels=
ro.board.platform=msm8916
# ro.build.product is obsolete; use ro.product.device
ro.build.product=zoom_row
# Do not try to parse description, fingerprint, or thumbprint
ro.build.description=zoom_row-user 5.1 LMY47O Z90a40_S226_151022_ROW release-keys
ro.build.fingerprint=Lenovo/zoom_row/zoom_row:5.1/LMY47O/Z90a40_S226_151022_ROW:user/release-keys
ro.build.characteristics=default
ro.lenovo.series=VIBE Shot
ro.lenovo.vibeui.apps=1f4f94a
ro.lenovo.vibeui.patch_mtk=
ro.lenovo.vibeui.patch_qcom=
ro.lenovo.vibeui.patch_intel=
ro.lenovo.vibeui.resources=6e3f17e
ro.lenovo.vibeui.components=a2c0c26
ro.lenovo.vibeui.tools=7fe0357
ro.lenovo.lvp.version=V2.6.0.0_1508211147_A1f4f94aR6e3f17eCa2c0c26T7fe0357P840b86d
persist.lenovo.feedback=false
# end build properties
#
# from device/lenovo/zoom_row/system.prop
#
#
# system.prop for msm8916
#
rild.libpath=/vendor/lib64/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
# Start in cdma mode
ro.telephony.default_network=9,1
debug.sf.hw=0
debug.egl.hw=0
persist.hwc.mdpcomp.enable=true
debug.mdpcomp.logs=0
dalvik.vm.heapsize=36m
dev.pm.dyn_samplingrate=1
persist.demo.hdmirotationlock=false
#ro.hdmi.enable=true
#tunnel.decode=true
#tunnel.audiovideo.decode=true
#lpa.decode=false
#lpa.use-stagefright=true
#persist.speaker.prot.enable=false
#
# system props for the cne module
#
#persist.cne.feature=1
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
media.swhevccodectype=0
mm.enable.smoothstreaming=true
mmp.enable.3g2=true
media.aac_51_output_enabled=true
#codecs:DivxHD Divx FLAC QCP MP2TS 3G2 DTS AVI AC3 AAC
mm.enable.qcom_parser=3314275
# Default to AwesomePlayer
media.stagefright.use-awesome=true
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data.netmgrd.qos.enable=true
#system props for time-services
persist.timed.enable=true
#
# system prop for opengles version
#
# 131072 is decimal for 0x30000 to report version 3
ro.opengles.version=196608
# System property for cabl
ro.qualcomm.cabl=0
#
# System props for telephony
# System prop to turn on CdmaLTEPhone always
telephony.lteOnCdmaDevice=1
#
# System props for bluetooh
# System prop to turn on hfp client
bluetooth.hfp.client=1
#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=fluence
persist.audio.fluence.voicecall=true
persist.audio.fluence.voicerec=false
persist.audio.fluence.speaker=false
#Set for msm8916
tunnel.audio.encode = false
#Buffer size in kbytes for compress offload playback
audio.offload.buffer.size.kb=32
#use VERY_HIGH_QUALITY for audio resampler
af.resampler.quality=4
#Enable offload audio video playback by default
av.offload.enable=false
#enable voice path for PCM VoIP by default
use.voice.path.for.pcm.voip=true
#System property for FM transmitter
ro.fm.transmitter=false
#enable dsp gapless mode by default
audio.offload.gapless.enabled=true
#Audio voice concurrency related flags
voice.playback.conc.disabled=false
voice.record.conc.disabled=false
voice.voip.conc.disabled=false
#property to enable user to access Google WFD settings
persist.debug.wfd.enable=1
#property to enable VDS WFD solution
persist.hwc.enable_vds=1
#property to enable narrow search range for video encoding
vidc.enc.narrow.searchrange=1
ro.qcom.ad.sensortype=2
ro.qcom.ad=1
ro.lenovo.owner_sdcard_support=1
#enable atfwd
persist.radio.atfwd.start=true
# Enable silent PIN1
persist.radio.sap_silent_pin=1
#
# ADDITIONAL_BUILD_PROPERTIES
#
persist.sys.lenovo.shutdown=TRUE
persist.sys.lenovo.log.limit=4000
persist.sys.lenovo.log.disk=/storage/sdcard0
persist.sys.lenovo.log.system=TRUE
persist.sys.lenovo.log.kernel=TRUE
persist.sys.lenovo.log.other=TRUE
persist.sys.lenovo.log=FALSE
persist.sys.dloadmode.config=0
persist.sys.lenovo.Acrash.cnt=0
persist.sys.lenovo.Kcrash.cnt=0
persist.sys.lenovo.crash.path=/data/local/log/lastlog
persist.sys.lenovo.crash.out=/storage/sdcard0/log_out
ro.config.notification_sound=Notice.ogg
ro.config.alarm_alert=New_Morning.ogg
ro.config.ringtone=Fantastic_Clang.ogg
ro.config.ringtone_2=Fantastic_Clang.ogg
ro.config.sms_notifi_sound=Curiosity.ogg
ro.config.sms_notifi_sound_2=Curiosity.ogg
dalvik.vm.heapgrowthlimit=256m
keyguard.no_require_sim=true
ro.com.android.dataroaming=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
sys.lenovo.romui.version.sdk=3
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.vendor.extension_library=libqti-perfd-client.so
persist.radio.apm_sim_not_pwdn=1
persist.radio.sib16_support=1
dalvik.vm.heapstartsize=12m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=16m
dalvik.vm.heapmaxfree=32m
ro.lenovo.device=phone
ro.lenovo.platform=qualcomm
ro.com.google.clientidbase=android-lenovo
ro.lenovo.audioparaver=ZOOM_Audio_Parameter_ROW_PVT_20150630
ro.frp.pst=/dev/block/bootdevice/by-name/config
persist.cne.feature=0
ro.telephony.default_network=22,1
persist.radio.multisim.config=dsds
ro.product.ota.model=LenovoZ90a40_ROW
ro.lenovo.easyimage.enable=yes
ro.lenovo.systemverify.enable=yes
ro.product.sw.internal.version=Z90a40_USR_S226_1510221726_Q2020131.4_ROW
ro.lenovo.support.ipdial=true
ro.lenovo.region=row
ro.lenovo.sim=dsds
ro.lenovo.operator=open
ro.lenovo.bqb=pass
ro.lenovo.wificert=no
ro.lenovo.adb=apkctl,speedup
ro.lenovo.signalbars=four
ro.lenovo.videocall=false
ro.lenovo.vibeuistyle=true
persist.backgrounddata.enable=false
persist.lenovo.ltetype=CSFB
persist.log.debug=0
persist.sys.timezone=Asia/Shanghai
ro.product.locale.language=en
ro.product.locale.region=US
ro.sf.lcd_density=480
persist.radio.rat_on=combine
persist.radio.ruimenabled=true
persist.sys.ruimenabled=true
persist.radio.primarycard=true
persist.env.fastdorm.enabled=true
persist.sim.simlock=false
persist.sim.simunlock=false
ro.lenovopctl=1
ro.setupwizard.mode=OPTIONAL
ro.com.google.gmsversion=5.1_r1
ro.com.google.clientidbase.ms=android-lenovo
ro.com.google.clientidbase.am=android-lenovo
ro.com.google.clientidbase.gmm=android-lenovo
ro.com.google.clientidbase.yt=android-lenovo
drm.service.enabled=true
ro.com.widevine.cachesize=16777216
persist.sys.dalvik.vm.lib.2=libart.so
dalvik.vm.isa.arm64.features=div
dalvik.vm.isa.arm.features=div
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
persist.gps.qc_nlp_in_use=1
persist.loc.nlp_name=com.qualcomm.location
ro.gps.agps_provider=1
ro.pip.gated=0
What i would like in short
I hope it can be done with this AT$QC command? new to this, but i have adb shell and su acces and minor understanding of what i did so far. Basicly i just want to tell my phone :
preferend band = 2600 // If not found then (and only then) go to other band (900mhz 3g) And ofc preferred band meaning it will also switch back once signal is re-established.
Thanks for reading and hoping someone will be able to help me out. (p.s sorry if im in wrong section, there is no lenovo vibe z90 thread, only vibe p1 and wasnt sure to post there, and all other z90 treads are mostly about roms :/ )