Related
stewie01 said:
Checking update for 2.05.161.1...
*** FOUND NEW VERSION 3.14.161.1 *** h**p://fotadl.htc.com/OTA_Legend_Froyo_S_Vodafone_UK_3.14.161.1-2.05.161.1_R_release_135177_156984u2k321537x1cpy3d.zip
Checking update for 2.05.163.1...
*** FOUND NEW VERSION 3.14.163.1 *** h**p://fotadl.htc.com/OTA_Legend_Froyo_S_Vodafone_FR_3.14.163.1-2.05.163.1_R_release_135178_156976z7st0ojsytxcijbe.zip
Checking update for 2.05.177.2...
*** FOUND NEW VERSION 3.14.177.1 *** h**p://fotadl.htc.com/OTA_Legend_Froyo_S_Vodafone_AT_GER_Mobilkom_3.14.177.1-2.05.177.2_release_136766_156979h6vst6mdtj4013sm.zip
Click to expand...
Click to collapse
Here are the different versions of Froyo for the HTC Legend - perhaps a Dev can make something out of it
posted in wrong section
Not so wrong ))))
We need it to create the best FROYO rom for HERO....
Perdita2000
^^
m-o-m
~~~~
why is that? we've been waiting for the legend froyo so we can get a better port for the Hero.
my hero is waiting, anxiously, his new sense rom
Yeeesss...come on developers , I can't wait for new froyo sense rom ...GOOD LUCK!!
good find! i'll wait a few days before wearing out my F5 key...
first link dont work anyone have a mirror for the uk one?
link it's ok. Look at lats caracter, before .zip, there are blank space.
ninpo
we need you
System dump,found at 4PDA forum!
http://www.4shared.com/get/ti74Iuwc/dump.html
http://sendfile.su/210521
Ganii said:
System dump,found at 4PDA forum!
http://www.4shared.com/get/ti74Iuwc/dump.html
http://sendfile.su/210521
Click to expand...
Click to collapse
yes!!! thanks!
hope to make a good port
i am waiting for
That`s from "build.prop"
Code:
ro.ril.ecc.VODA-UK=112,911,999
ro.ril.def.agps.mode.VODAP001=1
ro.ril.def.agps.mode.VODAP102=1
ro.ril.def.agps.mode.VODAPE17=1
ro.ril.def.agps.mode.VODAP304=1
ro.ril.enable.a52=0
ro.ril.enable.a53=1
ro.ril.hsdpa.category=8
ro.ril.hsupa.category=5
ro.ril.hsxpa=2
ro.ril.radio.svn=2
ro.ril.disable.fd.plmn.prefix=23402,23410,23411
ro.ril.enable.sdr=0
# begin build properties
# autogenerated by buildinfo.sh
ro.com.google.clientidbase=android-vf-{country}
ro.com.google.clientidbase=android-vf-{country}
ro.build.id=FRF91
ro.build.display.id=FRF91
ro.build.version.incremental=282424
ro.build.version.sdk=8
ro.build.version.codename=REL
ro.build.version.release=2.2
ro.build.date=四 11月 4 22:34:26 CST 2010
ro.build.date.utc=1288881266
ro.build.type=user
ro.build.user=
ro.build.host=AA107
ro.build.tags=release-keys
ro.product.model=HTC Legend
ro.product.brand=vodafone_uk
ro.product.name=htc_legend
ro.product.device=legend
ro.product.board=legend
ro.product.cpu.abi=armeabi
ro.product.manufacturer=HTC
ro.product.locale.language=mdpi
ro.product.locale.region=
ro.wifi.channels=
ro.board.platform=msm7k
# ro.build.product is obsolete; use ro.product.device
ro.build.product=legend
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=3.14.161.1 CL282424 release-keys
ro.build.description=3.14.161.1 CL282424 release-keys
ro.build.changelist=282424
ro.product.ua=
ro.build.fingerprint=vodafone_uk/htc_legend/legend/legend:2.2/FRF91/282424:user/release-keys
ro.build.project=156984
ro.product.version=3.14.161.1
keyguard.no_require_sim=1
# end build properties
#
# system.prop for legend
#
rild.libpath=/system/lib/libhtc_ril.so
# Modify MMS APN retry timer from 5s to 2s.
ro.gsm.2nd_data_retry_config = max_retries=3, 2000, 2000, 2000
wifi.interface = tiwlan0
# Time between scans in seconds. Keep it high to minimize battery drain.
# This only affects the case in which there are remembered access points,
# but none are in range.
wifi.supplicant_scan_interval = 15
# Soft AP interface definition
softap.interface = tiap0
hostapd.status = unloaded
# density in DPI of the LCD of this board. This is used to scale the UI
# appropriately. If this property is not defined, the default value is 160 dpi.
ro.sf.lcd_density = 160
#0 - mdp composition, 1 - gpu composition
ro.sf.hw=1
# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number
ro.opengles.version = 131072
# Default network type
# 0 => WCDMA Preferred.
ro.telephony.default_network = 0
# For the agps default value
ro.ril.def.agps.mode = 2
# For 7227 projects ,default enable AMR-Wideband ([email protected]: WSD request to disable it by default)
# ro.ril.enable.amr.wideband = 1
# For emmc phone storage
ro.phone_storage = 0
#
# This file describes the media capabilities and profiles
# using system properties.
#
# Note: The property key and value has some length
# limit as defined by PROPERTY_KEY_MAX and
# PROPERTY_VALUE_MAX, respectively
#
# WARNING: We may not use system properties for specifying
# media capabilities and profiles in the future
#
ro.media.enc.file.format = 3gp,mp4
ro.media.enc.vid.codec = m4v,h263
ro.media.enc.vid.h263.width = 176,640
ro.media.enc.vid.h263.height = 144,480
ro.media.enc.vid.h263.bps = 64000,1600000
ro.media.enc.vid.h263.fps = 1,30
ro.media.enc.vid.m4v.width = 176,640
ro.media.enc.vid.m4v.height = 144,480
ro.media.enc.vid.m4v.bps = 64000,1600000
ro.media.enc.vid.m4v.fps = 1,30
# For FOTA setting (leave empty value to use default)
ro.htc.checkin.url = http://andchin.htc.com/android/checkin
ro.htc.checkin.crashurl = http://andchin.htc.com/android/crash
ro.htc.checkin.url_CN = http://andchin.htccomm.com.cn/android/checkin
ro.htc.checkin.crashurl_CN = http://andchin.htccomm.com.cn/android/crash
ro.htc.checkin.exmsg.url = http://fotamsg.htc.com/android/extra/
ro.htc.checkin.exmsg.url_CN = http://fotamsg.htccomm.com.cn/android/extra/
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.networklocation=1
ro.setupwizard.mode=DISABLED
ro.config.ringtone=Innovation.mp3
ro.config.notification_sound=Color.mp3
ro.config.alarm_alert=Light.mp3
ro.config.cal_notification=Vector.mp3
ro.config.msg_notification=Ascend.mp3
ro.setupwizard.mode=OPTIONAL
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
ro.com.google.clientidbase=android-vf-{country}
ro.ril.enable.managed.roaming=1
ro.setupwizard.mode=OPTIONAL
ro.com.google.gmsversion=2.2_r7
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
So this means that soon I will have "original" Android 2.2 with HTC Sense UI on my Hero ?
Like:
youtu.be/VycV_QfDc8w
If so, go go devs xD
Hmm, it's going to be interesting to see whether the dev's pick stuff from the Legend ROM and stick them in the already out Gratia ROM, or just do a fresh build.
Dear devs,
Now It's your time to shine! Make all the Hero owners proud of their forgotten phone!
whats taking so long its been at least 12 hours since it hit the net why is it not ported yet lol ;-)
skedone said:
whats taking so long its been at least 12 hours since it hit the net why is it not ported yet lol ;-)
Click to expand...
Click to collapse
dude it is not that simple yet, this 2.2 legend is pretty different than other legends
Working on it.. hard one
After i installed my ARHD on my DHD i have problems with GPS. It's not as accurate as it was with stock ROM, please help !
I've had my DHD for less than a year and also started getting gps issues (long time to fix, low accuracy, only 3 to 4 sats). After trying many roms and many software hacks (gps.conf to gps-status etc.) I started looking at hardware. I noticed that the connections in my gps-antenna cover were wearing out. I ordered a new gps-antenna and replaced it and now it works great again.
Check the post in my sig for a video how to change the gps-antenna (not my video)
we don't have the same problem, when i'm at home my gps shows that i'm in completely different city, but when i'm in the citymall for example it shows correctly...
GPS problem
Hi wrooney, you're not using Google maps 6.03 are you? Coz I had real problems with that and ARHD almost impossible to get a fix. They have updated maps to 6.10 now and that's working fine in my DHD with ARHD 6.31.
i have Maps version 6.0.1 and android revolution HD 6.3.1, now what should i do? somehow manually update maps?
Have you tried AGPS?
http://forum.xda-developers.com/showthread.php?t=1252011
I've been getting upwards of 8 sats and consistency connecting and locking on very quickly. I don't "activate" my GPS until I'm outside or in my car. It seems that helps a ton. I always open up GPS Toolbox before I route as well, so it can download some daily data.
Because at home you can't get GPS
Except if you leave in a tent of course...
Your phone is using 3 localization info: Wifi, GPS and cell towers.
I had exactly the same problem with Celcom in MY.
At home, perfect cell localization.
But in my office I was 50km away.
Wrong configuration of the tower.
To be sure, activate only one of the 3 (WiFi, GPS or data). I think switch of wifi and data as I bet on tower pb. You can also modify this in 'localization config'
Edit: in China, sometime the phone says it's locked on GPS but it put me at more than 50km away.
To solve it I activate data before launching Maps.
As stated before, GPS Status is a good to tool to check the GPS lock. Don't mess to much with pseudo soft to improve GPS... for me it's bul**t.
Good config of gps.conf is enough.
i post them for you as an example. But you have to adapt it for your country, this one is for China.
my gps.conf (zipped for upload)
but you don't get my problem my gps was working perfectly until i installed ARHD
I get your problem... but are you sure you kept the exact same config after flash?
Before I flash a ROM I always replace gps.conf in the zip by the one I attached for ex. I do the same with Maps.apk.
Are you sure that the config of localisation has not been modified between your previous ROM and this one? Are you sure to use the same version of the soft you're using for GPS? Same config of A-GPS.
By flashing the ROM you didn't change the HW and the radio. So the GPS reception has to be the same, only the way data is used is different now.
And last but not least... I can be wrong also. It's just my ideas and problems I encountered.
i don't know how to change the gps.conf, but i would like to try upg maps to lates version first than trying other methods, do you know how can i do that?
Thanks man the GPS.config file fixed my GPS problem
Sent from my Desire HD using xda premium
GPS probs
Attached a copy of Google maps 6.10. And GPS status which should help with fix speed.
i installed google maps and gpsstatus, but still innacuratte... :S
wrooney10 said:
i don't know how to change the gps.conf, but i would like to try upg maps to lates version first than trying other methods, do you know how can i do that?
Click to expand...
Click to collapse
Sorry.. to change gps.conf, just use rootexplorer (or equivalent) and replace the one you have in /system/etc/ (copy paste).
To upgrade maps is more tricky. On some ROM I can't... that's why I replace it before flashing (open the zip with 7zip and replace maps.apk in /system/apps/ with the one you want).
As I get use to it, I always replace these two files in a zip before flashing a rom (+delete apks I don't want, remove all ringtones and notif sounds...). It's easier to tune the zip than doing one by one on the phone.
i have the same problems with the RCMix3d Runny v4.0 i also used the patch of iBotPeaches but it dosen't work. i check the build.prop file and thereisn't anything about the gps, it's normal?
this is my build.prop file, it's normal? i need to write something?
#Edited by JSLEnterprises for RCMIX
ro.ril.ecc.VODA-Africa-South=112,999,911
ro.ril.ecc.HTC-GCC=999,112,997
ro.ril.ecc.HTC-ELL=92,93,94
ro.ril.ecc.HTC-WWE=999
ro.ril.ecc.HTC-Dutch=112
ro.ril.ecc.HTC-FRA=112,911
ro.ril.ecc.HTC-ITA=112,911
ro.ril.ecc.HTC-EastEurope=911
ro.ril.enable.a52.HTC-ITA=1
ro.ril.enable.a53.HTC-ITA=1
ro.ril.enable.amr.wb.HTC__A07=1
ro.phone.min_match.HTC__Y13=7
ro.ril.enable.amr.wb.HTC__Y13=1
ro.ril.enable.amr.wb.HTC__E11=1
ro.ril.enable.amr.wb.HTC__001=1
ro.phone.min_match.HTC__J15=7
ro.phone.min_match.HTC__016=7
ro.ril.enable.a52=0
ro.ril.enable.a53=1
ro.ril.disable.fd.plmn.prefix=23402,23410,23411,23420
ro.ril.enable.sdr=1
ro.ril.enable.amr.wideband=1
ro.com.google.clientidbase=android-htc-rev
ro.ril.vmail.23415=1571,BT
ro.ril.vmail.27203=171
ro.ril.vmail.65502=181
ro.ril.vmail.27211=171
ro.config.htc.enableCOTA=1
# begin build properties
# autogenerated by buildinfo.sh
ro.aa.customizationid=253838
ro.aa.project=Runnymede
ro.aa.romver=1.05.401.4
ro.aa.maincid=HTC__001
ro.aa.cidlist=HTC__001,HTC__E11,HTC__203,HTC__102,HTC__405,HTC__Y13,HTC__A07,HTC__304,HTC__032,HTC__N34,HTC__J15,HTC__016
ro.aa.skulist=401
ro.aa.rid=313
ro.aa.modelid=PD9810000
ro.build.changelist=185058
ro.aa.taskid=221900
ro.aa.mainsku=401
ro.cwkey=HTC__001
ro.com.google.clientidbase=android-htc
ro.aa.customizationid=253838
ro.build.id=GRJ90
ro.build.display.id=GRJ90
ro.build.version.incremental=182513.4
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.5
ro.build.date=三 10月 19 12:08:18 CST 2011
ro.build.date.utc=1318997298
ro.build.type=user
ro.build.user=
ro.build.host=ABM012
ro.build.tags=release-keys
ro.product.model=Desire HD
ro.product.brand=htc_wwe
ro.product.name=htc_ace
ro.product.device=ace
ro.product.board=spade
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=HTC
ro.product.locale.language=hdpi
ro.product.locale.region=
ro.wifi.channels=
ro.board.platform=msm7x30
# ro.build.product is obsolete; use ro.product.device
ro.build.product=runnymede
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=1.05.401.4 CL185058 release-keys
ro.product.ua=
ro.build.fingerprint=htc_europe/htc_runnymede/runnymede:2.3.5/GRJ90/182513.4:user/release-keys
ro.build.project=Runnymede:221900
ro.product.version=RCMix3D Runny v4.0
ro.build.languageremove=0
ro.build.sense.version=3.5
keyguard.no_require_sim=1
# end build properties
#
# system.prop for mahimahi
#
ro.sf.lcd_density=240
debug.fb.rgb565 = 0
# Use GPU for rendering UI
debug.sf.hw=1
rild.libpath=/system/lib/libhtc_ril.so
# Modify MMS APN retry timer from 5s to 2s.
ro.gsm.2nd_data_retry_config = max_retries=3, 2000, 2000, 2000
# ace RF team request
ro.ril.enable.dtm = 1
ro.ril.gprsclass = 12
ro.ril.hsdpa.category = 10
ro.ril.hsupa.category = 6
ro.ril.hsxpa = 2
# Default network type.
# 0 => WCDMA mode preferred.
ro.telephony.default_network = 0
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data_netmgrd_nint=8
wifi.interface=eth0
wifi.supplicant_scan_interval=30
# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number
ro.opengles.version = 131072
# This is a high density device with more memory, so larger vm heaps for it.
dalvik.vm.heapsize=32m
# For the default value of agps
ro.ril.def.agps.mode = 1
# For HSDPA low throughput
ro.ril.disable.power.collapse = 1
# For FOTA setting (leave empty value to use default)
ro.htc.checkin.url = i can't post the url, if you need it write me a pm
ro.htc.checkin.crashurl = i can't post the url, if you need it write me a pm
ro.htc.checkin.url_CN = i can't post the url, if you need it write me a pm
ro.htc.checkin.crashurl_CN = i can't post the url, if you need it write me a pm
ro.htc.checkin.exmsg.url = i can't post the url, if you need it write me a pm
ro.htc.checkin.exmsg.url_CN = i can't post the url, if you need it write me a pm
ro.htc.appupdate.url = i can't post the url, if you need it write me a pm
ro.htc.appupdate.url_CN = i can't post the url, if you need it write me a pm
ro.htc.appupdate.exmsg.url = i can't post the url, if you need it write me a pm
ro.htc.appupdate.exmsg.url_CN = i can't post the url, if you need it write me a pm
# Release Bluetooth HW/SW information
ro.bt.chipset = Broadcom BCM4329-B1
ro.bt.stack = Broadcom BTL-A
ro.bt.stack.version = 2.0.50.032
#0x10000010010100100000011 represent bt profile list
ro.bt.profiles = 4270339
# enable data roaming
ro.com.android.dataroaming = true
# Properties of BTLA stack
service.brcm.bt.activation = 0
service.brcm.bt.srv_active = 0
service.brcm.bt.hcid_active = 0
service.brcm.bt.btld = 0
service.brcm.bt.btld_pid = 0
service.brcm.bt.avrcp_pass_thru = 0
service.brcm.bt.avrcp_toggle = 1
service.brcm.bt.local_name =
# For quick boot mode
persist.sys.shutdown.mode = hibernate
# Vivo China NEL use
ro.ril.update.vivo.acoustic = 1
# Properties of Scalado Denoise param.
postprocess.iso_midband = 400
postprocess.denoise_level = 5
# Following property will be reference by Settings.
ro.product.processor= 1GHz Qualcomm Snapdragon 8255
ro.product.ram= 768MB
ro.product.display_resolution= 4.3" WVGA Screen
ro.product.main_camera= 8 Megapixel
ro.product.front_camera= NA
ro.product.bluetooth= 3.0
ro.product.wifi = 802.11 B/G/N
# For opensense sdk
ro.htc.common.version = 2.1.0.0
# For ext4 file system
ro.ext4fs = 1
# Dump native call stack when an ANR happens to com.htc.launcher.
profiler.anr_dump_native_uid = 9999
# Enable egl profiler
debug.egl.profiler = 1
# Properties for supporting framework features
ro.htc.framework.screencapture = true
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.url.legal= i can't post the url, if you need it write me a pm
ro.url.legal.android_privacy= i can't post the url, if you need it write me a pm
ro.com.google.networklocation=1
ro.setupwizard.mode=DISABLED
ro.setupwizard.mode=OPTIONAL
ro.config.ringtone=QuietlyBrilliant.mp3
ro.config.notification_sound=Zeta.mp3
ro.config.alarm_alert=NewDay.mp3
ro.config.cal_notification=Epsilon.mp3
ro.config.msg_notification=Gamma.mp3
ro.setupwizard.mode=DISABLD
ro.com.google.gmsversion=2.3_r7
media.a1026.nsForVoiceRec=0
htc.audio.alt.enable=1
htc.audio.hac.enable=1
ro.setupwizard.enterprise_mode=1
dalvik.vm.lockprof.threshold=500
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
persist.adb.notify=0
windowsmgr.max_events_per_sec=120
ro.rommanager.developerid=capychimp
ro.modversion=RCMix3D Runny 4.0
Click to expand...
Click to collapse
swazii said:
Thanks man the GPS.config file fixed my GPS problem
Sent from my Desire HD using xda premium
Click to expand...
Click to collapse
Did you modify the conf in any way with your country and continent or did you leave it the way it was?
I found USB tethering to my laptop with wifi works fine but 3G does not. With 3G tethering I can connect but no data is transferred.
Same problem with 3G hotspot - no data is transferred.
I have read this 3G tethering problem is common for certain devices, particularly with Sony.
Has anyone else experienced this problem or have any ideas what the problem is?
In case relevant:
HTC Wildfire S A510b
Android 2.3.5
Virgin Mobile
just a thought - could this be caused by the APN settings?
The 3G internet works fine on the phone.
I tried my sim card in another phone and 3G tethering worked fine.
And I tried another sim card in my phone and 3G tethering didn't work.
So common factor is this phone.
hoju_ said:
I tried my sim card in another phone and 3G tethering worked fine.
And I tried another sim card in my phone and 3G tethering didn't work.
So common factor is this phone.
Click to expand...
Click to collapse
You have a SIM card? Are you in the US?
I'm in Australia. (most countries use SIM cards)
But problem seems to be the phone, not the SIM card.
hoju_ said:
I'm in Australia. (most countries use SIM cards)
But problem seems to be the phone, not the SIM card.
Click to expand...
Click to collapse
Well yes but in the US the phone is CDMA (no SIM), that is why I asked since you did not state what country.
With the US version Virgin disabled tethering on the phone, not sure if they did it there too.
Is your phone rooted? If so then you might could re-enable that function.
ah OK.
Phone is not rooted. I tried superoneclick but root failed.
That is very interesting some phones have tethering disabled.
Is there a way to check whether this is the case?
hoju_ said:
ah OK.
Phone is not rooted. I tried superoneclick but root failed.
That is very interesting some phones have tethering disabled.
Is there a way to check whether this is the case?
Click to expand...
Click to collapse
I know that hot spot is disabled in the build.prop but am not sure if that would also disable tethering. If you was rooted then you could copy you system folder so I could look at it to see.
Check with a local cell shop and see if they can unlock your cell with a XTC-Clip.
Phone is already unlocked, just not rooted.
HTC support said I needed to install HTC Sync on my computer to get 3G tethering working. Does that sound right?
I can't test because HTC Sync only supports Windows, which I don't have.
hoju_ said:
Phone is already unlocked, just not rooted.
HTC support said I needed to install HTC Sync on my computer to get 3G tethering working. Does that sound right?
I can't test because HTC Sync only supports Windows, which I don't have.
Click to expand...
Click to collapse
You might need the modem drivers for you OS to get the tethering to work. I will test this weekend to see since I never used tethering but have and do use hot-spot.
I experience the same problem for both 3G tethering and 3G hotspot - connects but no data transfer. And wifi tethering works, so I assumed it was not a driver problem.
Would it be worth trying a tethering app in case the problem is with the builtin software?
hoju_ said:
I experience the same problem for both 3G tethering and 3G hotspot - connects but no data transfer. And wifi tethering works, so I assumed it was not a driver problem.
Would it be worth trying a tethering app in case the problem is with the builtin software?
Click to expand...
Click to collapse
Can you copy you build.prop and pm it to me?
How would you recommend extracting the build.prop?
I understand it is located in /system/build.prop, but when mounting the phone on my computer this folder is not available.
I installed some build.prop editor apps where I can view particular properties, but they did not have a feature to copy the file elsewhere.
hoju_ said:
How would you recommend extracting the build.prop?
I understand it is located in /system/build.prop, but when mounting the phone on my computer this folder is not available.
I installed some build.prop editor apps where I can view particular properties, but they did not have a feature to copy the file elsewhere.
Click to expand...
Click to collapse
You should be able to use Es File Explorer or Explorer copy it to your sdcard folder then get thru you computer.
awesome - Explorer worked well. Here is the build.prop:
Code:
ro.ril.oem.ecclist=112,000,911
ro.ril.enable.a52=0
ro.ril.enable.a53=0
ro.ril.hsdpa.category=8
ro.ril.hsxpa=1
ro.ril.fast.dormancy.rule=0
ro.ril.radio.svn=2
ro.ril.disable.mcc.filter=1
ro.ril.emc.mode=1
ro.ril.disable.fd.plmn.prefix=23402,23410,23411,23420
ro.ril.enable.sdr=0
ro.ril.oem.show.act=1
ro.ril.enable.r8fd=0
ro.com.google.clientidbase=android-htc
ro.com.google.clientidbase.yt=android-htc
ro.com.google.clientidbase.am=android-telstra-au
ro.com.google.clientidbase.vs=android-htc
ro.com.google.clientidbase.gmm=android-htc
ro.com.google.clientidbase.ms=android-htc
ro.ril.vmail.50501=+61101
ro.product.model=HTC Wildfire S A510b
# begin build properties
# autogenerated by buildinfo.sh
ro.aa.rid=673
ro.cwkey=TELST001
ro.aa.skulist=841
ro.aa.customizationid=394070
ro.onecid=
ro.aa.mainsku=841
ro.aa.taskid=271810
ro.aa.report=com
ro.aa.romver=2.26.841.4
ro.aa.maincid=TELST001
ro.aa.modelid=PG7612000
ro.aa.project=Marvel_S
ro.aa.cidlist=TELST001
ro.com.google.clientidbase=android-htc
ro.build.id=GRJ90
ro.build.display.id=GRJ90
ro.build.version.incremental=362953.4
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.5
ro.build.date=五 7月 13 18:54:53 CST 2012
ro.build.date.utc=1342176893
ro.build.type=user
ro.build.user=
ro.build.host=ABM018
ro.build.tags=release-keys
ro.product.model=htc wildfire s a510e
ro.product.brand=telstra_wwe
ro.product.name=htc_marvel
ro.product.device=marvel
ro.product.board=marvel
ro.product.cpu.abi=armeabi
ro.product.manufacturer=HTC
ro.product.locale.language=mdpi
ro.product.locale.region=
ro.wifi.channels=
ro.board.platform=msm7k
# ro.build.product is obsolete; use ro.product.device
ro.build.product=marvel
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=2.26.841.4 CL362953 release-keys
ro.build.description=2.26.841.4 CL362953 release-keys
ro.build.changelist=362953
ro.product.ua=
ro.build.fingerprint=telstra_wwe/htc_marvel/marvel:2.3.5/GRJ90/362953.4:user/release-keys
ro.build.project=Marvel_S:271810
ro.product.version=2.26.841.4
keyguard.no_require_sim=1
# end build properties
#
# system.prop for device
#
rild.libpath=/system/lib/libhtc_ril.so
# RilLibPath for Ganlite by Godel_Chen
rild.libpath.ganlite=/system/lib/librilswitch.so
rilswitch.vendorlibpath=/system/lib/libhtc_ril.so
rilswitch.ganlibpath=/system/lib/libganril.so
ro.ril.hep = 1
ro.ril.enable.dtm = 0
ro.ril.hsdpa.category = 8
# Modify MMS APN retry timer from 5s to 2s.
ro.gsm.2nd_data_retry_config = max_retries=3, 2000, 2000, 2000
wifi.interface = eth0
ro.ril.htcmaskw1.bitmask = 4294967295
ro.ril.htcmaskw1 = 14449
# Time between scans in seconds. Keep it high to minimize battery drain.
# This only affects the case in which there are remembered access points,
# but none are in range.
wifi.supplicant_scan_interval = 15
# density in DPI of the LCD of this board. This is used to scale the UI
# appropriately. If this property is not defined, the default value is 160 dpi.
#ro.sf.lcd_density = 120
ro.sf.lcd_density = 160
ro.com.google.locationfeatures=1
# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number
ro.opengles.version = 131072
dalvik.vm.heapsize=20m
# Default network type
# 0 => WCDMA Preferred.
ro.telephony.default_network = 0
# View configuration for QVGA
view.fading_edge_length = 8
view.touch_slop = 15
view.minimum_fling_velocity = 25
view.scroll_friction = 0.008
# For SD storage insert notification sound
persist.service.mount.playsnd = 0
# For the agps default value
ro.ril.def.agps.mode = 2
# For 7227 projects ,default enable AMR-Wideband ([email protected]: WSD request to disable it by default)
# ro.ril.enable.amr.wideband = 1
# For no auto focus devices
ro.workaround.noautofocus = 1
# default value of brightness
settings.display.brightness=143
# For HSDPA low throughput
ro.ril.disable.power.collapse = 1
# For PDP overlap problem
ro.ril.avoid.pdp.overlap = 1
#
# This file describes the media capabilities and profiles
# using system properties.
#
# Note: The property key and value has some length
# limit as defined by PROPERTY_KEY_MAX and
# PROPERTY_VALUE_MAX, respectively
#
# WARNING: We may not use system properties for specifying
# media capabilities and profiles in the future
#
ro.media.enc.file.format = 3gp,mp4
ro.media.enc.vid.codec = m4v,h263
ro.media.enc.vid.h263.width = 176,640
ro.media.enc.vid.h263.height = 144,480
ro.media.enc.vid.h263.bps = 64000,1600000
ro.media.enc.vid.h263.fps = 1,30
ro.media.enc.vid.m4v.width = 176,640
ro.media.enc.vid.m4v.height = 144,480
ro.media.enc.vid.m4v.bps = 64000,1600000
ro.media.enc.vid.m4v.fps = 1,30
#
# Increase SKIA decode memory capability for progressive jpg file
#
ro.media.dec.jpeg.memcap = 20000000
# try to disable proximity sensor in call by default
#gsm.proximity.enable=false
# For FOTA setting (leave empty value to use default)
ro.htc.checkin.url = http://andchin.htc.com/android/checkin
ro.htc.checkin.crashurl = http://andchin.htc.com/android/crash
ro.htc.checkin.url_CN = http://andchin.htccomm.com.cn/android/checkin
ro.htc.checkin.crashurl_CN = http://andchin.htccomm.com.cn/android/crash
ro.htc.checkin.exmsg.url = http://fotamsg.htc.com/android/extra/
ro.htc.checkin.exmsg.url_CN = http://fotamsg.htccomm.com.cn/android/extra/
ro.htc.appupdate.url = http://apu-chin.htc.com/check-in/rws/and-app/update
ro.htc.appupdate.url_CN = http://apu-chin.htccomm.com.cn/check-in/rws/and-app/update
ro.htc.appupdate.exmsg.url = http://apu-msg.htc.com/extra-msg/rws/and-app/msg
ro.htc.appupdate.exmsg.url_CN = http://apu-msg.htccomm.com.cn/extra-msg/rws/and-app/msg
# Release Bluetooth HW/SW information
ro.bt.chipset = Broadcom BCM4329-B1
ro.bt.version = Bluetooth 2.1 + EDR
ro.bt.stack = Broadcom BTL-A
ro.bt.stack.version = 2.2.017
#0x10000010010100100000011 represent bt profile list
ro.bt.profiles = 4270339
# Properties of BTLA stack
service.brcm.bt.activation = 0
service.brcm.bt.srv_active = 0
service.brcm.bt.hcid_active = 0
service.brcm.bt.btld = 0
service.brcm.bt.btld_pid = 0
service.brcm.bt.avrcp_pass_thru = 0
service.brcm.bt.avrcp_toggle = 1
# AOLC
htc.audio.alc.enable = true
# Following property will be reference by Settings.
ro.product.processor=600MHz
ro.product.ram=512MB
ro.product.display_resolution=3.2 inch HVGA resolution
ro.product.main_camera=5M
ro.product.front_camera=NA
ro.product.bluetooth= 3.0
ro.product.wifi = 802.11 b/g/n
# update the acoustic table for Buzz NEL lab testing
ro.ril.update.acoustic.table = 1
# For opensense sdk
ro.htc.common.version = 2.1.0.0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.setupwizard.mode=OPTIONAL
ro.config.ringtone=QuietlyBrilliant.mp3
ro.config.notification_sound=Zeta.mp3
ro.config.alarm_alert=NewDay.mp3
ro.config.cal_notification=Epsilon.mp3
ro.config.msg_notification=Gamma.mp3
ro.setupwizard.mode=DISABLD
ro.com.google.gmsversion=2.3_r7
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
From your build.prop they did not set a disable flag for hot-spot or tether. The only other thing I can suggest is try a different Rom on you device, but backup your current one First.
You can try this:
Code:
adb shell
rm -r /data/local/tmp
ln -s /data/ /data/local/tmp
exit
adb reboot
adb shell
echo 'ro.tether.denied=false' > /data/local.prop
exit
adb reboot
Then try tethering again.
darn, that sounds complicated.
Thanks for checking the build.prop
hoju_ said:
darn, that sounds complicated.
Thanks for checking the build.prop
Click to expand...
Click to collapse
Try this:
Code:
adb shell
rm -r /data/local/tmp
ln -s /data/ /data/local/tmp
exit
adb reboot
adb shell
echo 'ro.tether.denied=false' > /data/local.prop
exit
adb reboot
I understand that adb process requires root.
I tried superoneclick, unlockroot, and unrevoked to try and root the device, but all failed.
Are there other options?
hoju_ said:
I understand that adb process requires root.
I tried superoneclick, unlockroot, and unrevoked to try and root the device, but all failed.
Are there other options?
Click to expand...
Click to collapse
Check this link on CDMA S-OFF.
Hi. Can someone please upload the stock att gps.conf from system/etc please.
I flashed an international Rom on my phone and the gps is not locking on my phone.
Thanks in advance guys
haruyukisama said:
Hi. Can someone please upload the stock att gps.conf from system/etc please.
I flashed an international Rom on my phone and the gps is not locking on my phone.
Thanks in advance guys
Click to expand...
Click to collapse
Asking for this as well... your gps.conf on a stock ATT E980 ROM.
The file will be located under system/etc/gps.conf
I'm testing something related to the V5 stock based ROM with G2 mods.
Thanks!
#Test
#NTP_SERVER=time.gpsonextra.net
#Asia
# NTP_SERVER=asia.pool.ntp.org
#Europe
# NTP_SERVER=europe.pool.ntp.org
#North America
NTP_SERVER=north-america.pool.ntp.org
XTRA_SERVER_1=http://xtra1.gpsonextra.net/xtra2.bin
XTRA_SERVER_2=http://xtra2.gpsonextra.net/xtra2.bin
XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra2.bin
# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
# 4 - Debug, 5 - Verbose
DEBUG_LEVEL = 3
# Intermediate position report, 1=enable, 0=disable
INTERMEDIATE_POS=0
# supl version 1.0
#SUPL_VER=0x10000
# supl version 2.0
SUPL_VER=0x20000
# Error Estimate
# _SET = 1
# _CLEAR = 0
ERR_ESTIMATE=0
# GPS Capabilities bit mask
# SCHEDULING = 1
# MSB = 2
# MSA = 4
# DEMAND_TIME = 0x10
# ULP = 0x20
# default = MSA | MSB | SCHEDULING | ULP
# CAPABILITIES=0x27 // Not support ULP
CAPABILITIES=0x17
# Accuracy threshold for intermediate positions
# less accurate positions are ignored, 0 for passing all positions
# ACCURACY_THRES=5000
################################
##### AGPS server settings #####
################################
# FOR SUPL SUPPORT, set the following
# SUPL_HOST=supl.host.com or IP
SUPL_HOST=
SUPL_PORT=7275
POSITION_MODE=1
#POSITION_MODE=0 -> GPS_POSITION_MODE_STANDALONE
#POSITION_MODE=1 -> GPS_POSITION_MODE_MS_BASED
#POSITION_MODE=2 -> GPS_POSITION_MODE_MS_ASSISTED
# FOR C2K PDE SUPPORT, set the following
# C2K_HOST=c2k.pde.com or IP
# C2K_PORT=1234
################################
# Sensor Settings
################################
# Needs to be set explicitly based on sensor
# There is no default value.
#GYRO_BIAS_RANDOM_WALK=
SENSOR_ACCEL_BATCHES_PER_SEC=2
SENSOR_ACCEL_SAMPLES_PER_BATCH=5
SENSOR_GYRO_BATCHES_PER_SEC=2
SENSOR_GYRO_SAMPLES_PER_BATCH=5
# Sensor Control Mode (0=AUTO, 1=FORCE_ON)
SENSOR_CONTROL_MODE=0
# Enable or Disable Sensors for GPS use (0=Enable, 1=Disable)
SENSOR_USAGE=0
# Choose GSIFF sensor provider (1=DSPS, 2=Android NDK)
SENSOR_PROVIDER=1
################################
# Indoor Positioning Settings
################################
# 0: QUIPC disabled, 1: QUIPC enabled, 2: forced QUIPC only
QUIPC_ENABLED = 0
################################
# EXTRA SETTINGS
################################
# Enable or Disable Wiper (1=Enable, 0=Disable)
//LGE_UPDATE_S : [email protected] 2012-05-03
//[GNSS] Temp disable WIPER to "0"
ENABLE_WIPER=0
//LGE_UPDATE_E : [email protected] 2012-05-03
####################################
# LTE Positioning Profile Settings
####################################
# 0: Enable RRLP on LTE(Default) 1: Enable LPP_User_Plane on LTE
LPP_PROFILE = 0
################################
# LGE EXTRA SETTINGS
################################
VENDOR=ATT
LGE_TLS_MODE=5
LGE_GPS_POSITION_MODE=1
Sent from my LG-E980 using Tapatalk
Hi,
Does anyone have the stock GPS.config file?
Thanks
hill67 said:
Hi,
Does anyone have the stock GPS.config file?
Thanks
Click to expand...
Click to collapse
Stock from which rom / region?
Sorry,
I am in Europe, using RR ROM nougat 7.7.1 (so not stock, my mistake)
Code:
#Uncommenting these urls would only enable #the power up auto injection and force injection(test case). #XTRA_SERVER_1=http://xtrapath1.izatcloud.net/xtra2.bin #XTRA_SERVER_2=http://xtrapath2.izatcloud.net/xtra2.bin #XTRA_SERVER_3=http://xtrapath3.izatcloud.net/xtra2.bin #ifdef VENDOR_EDIT # [email protected] add gps xtra server for speed up gps cold start XTRA_SERVER_1=http://xtrapath1.izatcloud.net/xtra3grc.bin XTRA_SERVER_2=http://xtrapath2.izatcloud.net/xtra3grc.bin XTRA_SERVER_3=http://xtrapath3.izatcloud.net/xtra3grc.bin #endif #Version check for XTRA #DISABLE = 0 #AUTO = 1 #XTRA2 = 2 #XTRA3 = 3 XTRA_VERSION_CHECK=0 # Error Estimate # _SET = 1 # _CLEAR = 0 ERR_ESTIMATE=0 #Test NTP_SERVER=time.gpsonextra.net #Asia # NTP_SERVER=asia.pool.ntp.org #Europe # NTP_SERVER=europe.pool.ntp.org #North America # NTP_SERVER=north-america.pool.ntp.org # DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info # 4 - Debug, 5 - Verbose # If DEBUG_LEVEL is commented, Android's logging levels will be used DEBUG_LEVEL = 2 # Intermediate position report, 1=enable, 0=disable INTERMEDIATE_POS=0 # Below bit mask configures how GPS functionalities # should be locked when user turns off GPS on Settings # Set bit 0x1 if MO GPS functionalities are to be locked # Set bit 0x2 if NI GPS functionalities are to be locked # default - non is locked for backward compatibility #GPS_LOCK = 0 # supl version 1.0 SUPL_VER=0x10000 # Emergency SUPL, 1=enable, 0=disable SUPL_ES=0 #Choose PDN for Emergency SUPL #1 - Use emergency PDN #0 - Use regular SUPL PDN for Emergency SUPL USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=1 #SUPL_MODE is a bit mask set in config.xml per carrier by default. #If it is uncommented here, this value will overwrite the value from #config.xml. #MSA=0X2 #MSB=0X1 #SUPL_MODE= # GPS Capabilities bit mask # SCHEDULING = 0x01 # MSB = 0x02 # MSA = 0x04 # ON_DEMAND_TIME = 0x10 # GEOFENCE = 0x20 # default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING | GEOFENCE CAPABILITIES=0x37 # Accuracy threshold for intermediate positions # less accurate positions are ignored, 0 for passing all positions # ACCURACY_THRES=5000 ################################ ##### AGPS server settings ##### ################################ # FOR SUPL SUPPORT, set the following # SUPL_HOST=supl.host.com or IP # SUPL_PORT=1234 # FOR C2K PDE SUPPORT, set the following # C2K_HOST=c2k.pde.com or IP # C2K_PORT=1234 # Bitmask of slots that are available # for write/install to, where 1s indicate writable, # and the default value is 0 where no slots # are writable. For example, AGPS_CERT_WRITABLE_MASK # of b1000001010 makes 3 slots available # and the remaining 7 slots unwritable. #AGPS_CERT_WRITABLE_MASK=0 #################################### # LTE Positioning Profile Settings #################################### # 0: Enable RRLP on LTE(Default) # 1: Enable LPP_User_Plane on LTE # 2: Enable LPP_Control_Plane # 3: Enable both LPP_User_Plane and LPP_Control_Plane LPP_PROFILE = 2 ################################ # EXTRA SETTINGS ################################ # NMEA provider (1=Modem Processor, 0=Application Processor) NMEA_PROVIDER=0 # Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE) SGLTE_TARGET=0 ################################################## # Select Positioning Protocol on A-GLONASS system ################################################## # 0x1: RRC CPlane # 0x2: RRLP UPlane # 0x4: LLP Uplane #ifndef [email protected] enable all bit mask for GLONASS #A_GLONASS_POS_PROTOCOL_SELECT = 0 #else A_GLONASS_POS_PROTOCOL_SELECT = 15 #endif
Save as gps.conf