Related
Hi All,
Was wondering if anyone knows the maximum current the SGS2 can draw for charging purposes. I had a look at the wall charger provided with it, and it's 0.7a; it takes forever (my opinion) to charge compared to my last phone. Just wondering if it is worth my while investing in a more powerful charger.
Cheers
If you take the battery out and look and the sticker then it says there 1000mA
Excellent thanks; Can't get the back off my phone (fingernails).
oozrafa said:
If you take the battery out and look and the sticker then it says there 1000mA
Click to expand...
Click to collapse
Also, at the start of the SGS2 charging cycle, my wall-plug power meter reads 5.1 W.
5.1 is what the adapter is pulling. All of that isn't getting to the phone. Funny thing for my is the phone charges faster off my blackberry 0.75a charger then it does off my Galaxy I 1a charger.
Sent from my GT-I9100 using XDA Premium App
Someone in another thread mentioned seeing something in the source code about the phone drawing at most 650 mA (instead of a more typical 1000 mA) during charging. If that's the case, a more powerful charger by itself won't help; you'd also need a custom ROM that doesn't limit the charge current.
Does anyone know why Samsung would limit the charge current?
theinstagator said:
Does anyone know why Samsung would limit the charge current?
Click to expand...
Click to collapse
Speculation is that its a heat related problem. Don't want to pull a Sony and have the batteries explode on people... (but again, that's speculation)
Murfle said:
Speculation is that its a heat related problem. Don't want to pull a Sony and have the batteries explode on people... (but again, that's speculation)
Click to expand...
Click to collapse
I also heard that a smaller charging current extends the Li-ion battery's lifetime, even though I'd prefer quicker charging as the battery can be replaced with ease.
I second that. I tried it today with a 1A car charger (USB cig. plug) can't say it made a difference on speed of charge compared to wall one.
Just received my SGSII and the charging is extremely slow. 3+ hours = about 500 mAh, on a 1A wall charger. Never had such a slow charging smartphone before
To change i9100 charging current you have to short r529 or r531
Current limit will change to 1000mA
You can use 2A charger and phone will charge only with 650mA current
But after this short one of those resistors current limit will change to 1A
I use it on my phone and all is fine. Current after change is measured.
Wath this film youtube.com/watch?v=FL71G2YEIHU
Make shortcut of resistor and check your new current and feel the difference.
Is there a logfile, where I can see which charge current is used?
I have the suspicion, that my noname charger is not recognized properly and it only charges with USB current (450mA).
hmm a 1000mA current could be used also for the 2000mAh battery?
Yes, should not depend on the capacity of the battery.
Sent from my GT-I9100 using xda app-developers app
good
thank for all, it help me so much
1000mA is more likely the maximum current that the phone is expected to drain from the battery.
It is not the battery charging current, which is presumably equal to the mentioned 650mA, since the 1650mAh battery charges in about 4 hours.
If the charging current was actually 1000mA, then the 1650mA battery it would charge in 2 hours or so, but as we all know, it is not so, even with a 2A charger.
mine took about 4 hours charge the battery
The charging time depends on the Charger and Rom i use, i havent figured out for what reason.
Sometimes the SGS2 is charged in approx. 1 hour and with other Roms the charging time may take up to 3h.
kirschi said:
The charging time depends on the Charger and Rom i use, i havent figured out for what reason.
Sometimes the SGS2 is charged in approx. 1 hour and with other Roms the charging time may take up to 3h.
Click to expand...
Click to collapse
Definately 650ma, IF the phone detects an High current USB port, otherwise it falls back to lousy 400ma.
You can trick into 650ma always: take a usb cable, cut from the PC plug side the TX/RX cables, on the other side short them on PHONE plug side these two cables.
Phone will now always go into "AC charging mode". Don't worry (too much) for your USB ports, they can all well 1000ma, and the one that cannot will report "high current detected, port disable".
:fingers-crossed:
I see that the wall charger for the Galaxy Nexus outputs 5V and 1A. Unfortunately, none of the extra chargers I'd like to use as additional chargers have this output. Some of them are 5.1V, and some of them all put out under 1A.
From what I understand, using a charger w/ a higher voltage could potentially damage the phone. I know that this unlikely considering it's only an extra .1V in my case, but I don't want to risk it.
As for the amps, I believe that using lower amps isn't dangerous, but may result in charging taking longer than normal.
Are these two assumptions correct? Also, does anyone know of any cheap chargers that put out 5V/1A? If you put in "phone charger" in Amazon, the second hit is a Samsung OEM charger that puts out 5V/0.7A, but I'd rather get one that is going to be an exact match.
700-800mah are fine and acceptable for charging. But if wanting to play games on a charger and still get some kind of charge, go with a 1000 mah charger. 1000 mah charger is also best to use while using mhl so you can hopefully not lose battery charge while streaming video over hdmi.
Sent from my samsung gt i9250 which is in the wrong country.
Speaking of the charger... anyone found a cheap charger adapter for the Nexus? I don't like the massive brick of a "international adapter" Handtec packaged with the phone >.>
Dmw017 said:
Speaking of the charger... anyone found a cheap charger adapter for the Nexus? I don't like the massive brick of a "international adapter" Handtec packaged with the phone >.>
Click to expand...
Click to collapse
http://www.amazon.com/Samsung-Micro-Travel-Charger-M540/dp/B002HJBM04
http://www.amazon.com/Samsung-Travel-Charger-Adapter-MicroUSB/dp/B0049IE70I
Dmw017 said:
Speaking of the charger... anyone found a cheap charger adapter for the Nexus? I don't like the massive brick of a "international adapter" Handtec packaged with the phone >.>
Click to expand...
Click to collapse
I'm using a Griffin charger for the iPhone (1 amp)... it's very small and the plug blades fold up, making it very pocketable. Give the included iPhone cable to a friend.
http://www.amazon.com/Griffin-NA231...?s=electronics&ie=UTF8&qid=1322795627&sr=1-33
alee said:
I'm using a Griffin charger for the iPhone (1 amp)... it's very small and the plug blades fold up, making it very pocketable. Give the included iPhone cable to a friend.
http://www.amazon.com/Griffin-NA231...?s=electronics&ie=UTF8&qid=1322795627&sr=1-33
Click to expand...
Click to collapse
it's.. 24 bucks ... for a charger..
lol fml
Dmw017 said:
it's.. 24 bucks ... for a charger..
lol fml
Click to expand...
Click to collapse
Haha, it's a nice charger.
If you don't get that one, do get a charger that does at least 700mA... or ideally 1A. Some of the cheaper chargers don't put out a lot of power and it will take a long time to charge your phone.
alee said:
Haha, it's a nice charger.
If you don't get that one, do get a charger that does at least 700mA... or ideally 1A. Some of the cheaper chargers don't put out a lot of power and it will take a long time to charge your phone.
Click to expand...
Click to collapse
...you say it folds too huh :/ ....
but for that price, i wonder if there are any samsung chargers that are just as good if not better..
that is Apple, after all
hey isnt http://www.amazon.com/Griffin-Techn...al-USB-Charging/dp/B004EYH5WY/ref=pd_sim_e_10 the same product , it says it does 5 volts at 5 watts ... thats the same right?
edit: some people are reporting that the charger only charges at 0.5A instead of the full 1A on [some] android devices. if you have the charger, can you confirm your nexus charges at the full 1A watts
I've been doing fine with just plugging it into my computer like I always do with every other phone.
Sent from my Galaxy Nexus using xda premium
Dmw017 said:
hey isnt http://www.amazon.com/Griffin-Techn...al-USB-Charging/dp/B004EYH5WY/ref=pd_sim_e_10 the same product , it says it does 5 volts at 5 watts ... thats the same right?
edit: some people are reporting that the charger only charges at 0.5A instead of the full 1A on [some] android devices. if you have the charger, can you confirm your nexus charges at the full 1A watts
Click to expand...
Click to collapse
Same one.
Good question on whether it's putting out a full 1A. I guess what I do is check the charge times tomorrow with a few different 1A chargers to see if it measures up.
I use this for home:
http://www.amazon.com/Cellet-Charger-Retractable-Cable-myTouch/dp/B004XVM1T0
And this for the car:
http://www.amazon.com/Griffin-Powerjolt-Dual-Universal-Micro/dp/B0042B9U8Q
Both are dual-USB and put out 1amp. Charges my GNEX and iPhone 4 (work) at the same time without issues.
Just feel like to chime in here for another question.
I know typical USB port from a PC outputs 0.5A while the wall charger outputs 1A, so besides charging time, is there any particular advantages to use wall charger over USB from PC?
I've read somewhere else states that despite the longer charging time using a USB port from a PC, it provides more thorough charges hence is better for the battery than using a wall charger, is this true?
Thanks!
assisterah said:
Just feel like to chime in here for another question.
I know typical USB port from a PC outputs 0.5A while the wall charger outputs 1A, so besides charging time, is there any particular advantages to use wall charger over USB from PC?
I've read somewhere else states that despite the longer charging time using a USB port from a PC, it provides more thorough charges hence is better for the battery than using a wall charger, is this true?
Thanks!
Click to expand...
Click to collapse
I've read that the wall charger drops the battery down to 90ish % after it hits 100% and just goes between the two levels until you unplug your charger
While a USB charge is slower and charges your device up to a "fuller" charge
...I may be unfathomably wrong though
---------- Post added at 10:57 PM ---------- Previous post was at 10:56 PM ----------
man that little Apple charger is so damn cute ... lol , ill probably end up buying it once the 1A volt charge is confirmed
edit: just bought it lol, oh well.. it will probably maybe more or less somewhat possibly work like it should at 1A :}
assisterah said:
Just feel like to chime in here for another question.
I know typical USB port from a PC outputs 0.5A while the wall charger outputs 1A, so besides charging time, is there any particular advantages to use wall charger over USB from PC?
I've read somewhere else states that despite the longer charging time using a USB port from a PC, it provides more thorough charges hence is better for the battery than using a wall charger, is this true?
Thanks!
Click to expand...
Click to collapse
I'm not an expert on the subject but I was under the impression that cycles (charge + discharge) were a bigger factor on battery life than something like this. The longer a current is running through the battery (charge or discharge) is detrimental to it's life span.
Leaving a laptop plugged in all the time ruins its battery is my source on this one. I would say it's because it has a constant charge running through the battery.
qreffie said:
I've been doing fine with just plugging it into my computer like I always do with every other phone.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
That takes a lot longer vs plugging it into the wall
rashad1 said:
That takes a lot longer vs plugging it into the wall
Click to expand...
Click to collapse
True dat. Unless it has changed , USB only outputs 500mA.
Sent from my Galaxy Nexus using Tapatalk
[hfm] said:
True dat. Unless it has changed , USB only outputs 500mA.
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
500mA is the max before the PC will disable the port. So your actually get less current.
There are some ports, depending on the motherboard that have a option of outputting more power for charging devices, and also have the port powered when the computer is off. But a normal usb 2.0 port is limited to 500mA max per spec... so a normal usb 2.0 port charging a phone is drawing less then 500mA, or it would get and over current condition and disable the port.
I design electronics and work with USB and batteries often, so let me clear some stuff up in no particular order:
- PC ports are limited to 500mA so will only ever output a max of 500mA
- You can use a wall charger that outputs 1000mA but on most devices the data pins on the micro USB need to be shorted to tell the phone it can try to draw more than 500mA. This is true for HTC devices for example. That means if you get a cheap charger that doesn't short the data pins, when you plug your standard micro-usb cable into it, it will still only charge your phone at 500mA.
- The charging controller is actually in the phone. It decides based on temperature (there's a sensor in the battery), current, voltage across the battery (current charge) and characteristics of the type of battery to figure out how much current to allow into the battery. Although its true that a 500mA charger may have different affects than 1000mA chargers, there usually is very little perceivable difference. Which is (slightly) better really depends on the charging controller and how it decides when to stop charging.
- When the battery is full, the phone continues to 'trickle charge' for a period of time. This isn't a bad thing. Overcharging a Lithium battery can be extremely dangerous, so normal charging occurs at a high speed and then slows down at a safe limit below the 'true' 100%. After that the phone continues to trickle charge to top up the battery. This is the reason you read in phone manuals you should charge the phone for 8 hours or overnight for its first charge.
- When charging at 500mA, the battery does not get as hot. This usually means you get closer to the true 100% before 'trickle charging' starts. With a 1000mA charge the battery heats up a lot more so charging may switch to trickle much sooner. Here's an example with made up figures.
Lets say you charge your battery with a 500mA charger, and it takes 2 hours. When the phone shows 100% it may actually be at 99%, and trickle charging. Leaving it for another 30 mins may take it to its full capacity.
Now, lets say you charge your battery with a 1000mA charger, and it takes 1 hour. When the phone shows 100% it may actually be at 98%, and trickle charging - It stopped sooner because the battery was hotter. Leaving it for another 30 mins may take it to full capacity.
Conclusion.. the 500mA charger took 2.5 hours, while the 1000mA charger took 1.5 hours. However if you unplugged both when the phone showed 100%, the 500mA charged battery may last longer, and so you think the 500mA somehow resulted in a more thorough charge!
At the end of the day, it doesn't matter which you use. the absolute charge cycles is what counts. Charge to 100%, then dont charge till its 0 for best battery care. Constantly plugging into a charger or dock all day on and off is bad. But having said that, your phone is there to be used, so a sensible balance of the two is the best bet.
Thank you so much for the detailed response, kam187. Would you recommend avoiding using a 5.1V charger, considering the phone came with a 5V charger?
Sent from my Galaxy Nexus using Tapatalk
I wouldn't use it. The 0.1v probably won't make any difference, but it may not be regulated. Chargers with these odd values sometimes don't have any regulator inside them. That could damage your phone as the voltage could shoot up and down as the current draw changes.
Just search amazon/ebay for any MicroUSB charger, and pick one from a reputable manufacturer like Motorola, HTC, Samsung etc. Since all phones now use MicroUSB, there's loads of these chargers around from previous phone models etc.
Here's just one I saw on amazon.com:
http://www.amazon.com/Samsung-Trave...E70I/ref=sr_1_3?ie=UTF8&qid=1322808220&sr=8-3
Hi all:
I just did a test on the maximum charging current of the One X using current measurement equipment, and it shows that the One X does not draw above 460mA of current while charging.
With this value, i suspect that the One X limits max charging current at 500mA, which means 3 things:
1) Using any previous generation USB charger (750mA or 850mA or 1A) is good enough. Attempting to use the iPad's charger (rated at 2A) WILL NOT get you faster charging time.
2) When using battery draining applications, the charging current may not be enough for you to both CHARGE and USE the Phone. Thus it might be a better idea to give your One X some dedicated charging time.
3) Some computer USB ports may specify 500mA of output current, but there are many times the available current is less than that. On my USB port, the charging current is only about 300mA at times. So it is better to use a dedicated charger if you have it available. Having that said, however, it is still ok to charge the One X with a USB port at 300mA, just that charging will take longer.
That's all I have to report. Useful information for all.
limestone said:
Useful information for all.
Click to expand...
Click to collapse
Useful indeed. Thanks
Sent from my HTC Vivid using XDA app
I've had mine charge at 780mAh+ before. 1amp HTC charger. Charge rate slows down at the last 20-30% or so. So from 70%-100% battery, charge rates normally slow to about 450mAh.
limestone said:
Hi all:
1) Using any previous generation USB charger (750mA or 850mA or 1A) is good enough. Attempting to use the iPad's charger (rated at 2A) WILL NOT get you faster charging time.
Useful information for all.
Click to expand...
Click to collapse
thanks a lot, i can confirm the statement above because my stock charger is broken and i'm using the ipad's one.
bye
i tried to use the charger for htc chacha and hd2..
both does not work.. red light will light up but after a while it will go off and the phone does not charge..
Charging my HOX while the phones working hard eventually (after say, 5 mins), causes the charge LED to flash green/red. I've had this twice now, once while playing a 720P HD film, and once when playing Glowball.
Both times the phone was very hot, so i'm not sure if the LED thing was to indicate that the battery was too hot to charge, or that the charger could not supply enough power to charge and power the phone at the same time.
fi3ry_icy said:
i tried to use the charger for htc chacha and hd2..
both does not work.. red light will light up but after a while it will go off and the phone does not charge..
Click to expand...
Click to collapse
I'm using my HD2 charger at work every day. It charges at about 400/500mA.
Original charger gives me 650/750mA (lowers at the end)
chaps said:
Charging my HOX while the phones working hard eventually (after say, 5 mins), causes the charge LED to flash green/red. I've had this twice now, once while playing a 720P HD film, and once when playing Glowball.
Both times the phone was very hot, so i'm not sure if the LED thing was to indicate that the battery was too hot to charge, or that the charger could not supply enough power to charge and power the phone at the same time.
Click to expand...
Click to collapse
If the charger cannot cope with the discharge from the game, a pop up message actually appears. If it's blinking means it's too hot. Try not to do anything intensive the last 20-30% remaining (meaning at 70-100% battery).
Nice info thanks
Sent from my HTC One X using XDA
fi3ry_icy said:
i tried to use the charger for htc chacha and hd2..
both does not work.. red light will light up but after a while it will go off and the phone does not charge..
Click to expand...
Click to collapse
Same here... I am using the Atrix 4G (US) charger, it does not charge the phone. The charger gives output of 850mA. It does charge when plugged into the laptop, but I think it will take very long that way.
*edit for posterity*
after a while (I did it when battery had charged to 20%), I could connect the Moto US charger, and it would show as "AC". It would not want to charge through it when the battery was really low (2%), but it would charge via USB in that case. Weird behavior, IMO.
USB limited to 500. AC limited to 1A.
Sent from my HTC One X using xda premium
If you want maximum speed of charging (AC charging) you need:
1A charger with shorted D+ and D- pins (eg, original HTC charger).
iPad charger probably doesn't have these pins shorted, so in this case phone will see it as USB charging (you can check it in settings->battery) and will limit charging current to 500mA. Also lot of aftermarket car chargers will work only in USB mode despite they are able to supply 1A.
Here you can find some info on USB Charging Ports (shorted D+- pins):
http://en.wikipedia.org/wiki/Universal_Serial_Bus#Charging_ports_and_accessory_charging_adapters
When charger is "USB", it will not draw more than 500mA from the charger, and usually it will not charge at all (because the current draw with screen on is higher than 500mA).
When charger is AC, it seems to draw 1000mA - but this is still too low to charge while phone is doing anything, as it will draw 700mA and charge ~250mA top.
I hope this can be tuned in kernel, because it sucks, I also hope that power source can be AC (and not battery - look in dmesg when charger is connected), because battery gets too hot when under load...
colin_ktp said:
If you want maximum speed of charging (AC charging) you need:
1A charger with shorted D+ and D- pins (eg, original HTC charger).
iPad charger probably doesn't have these pins shorted, so in this case phone will see it as USB charging (you can check it in settings->battery) and will limit charging current to 500mA. Also lot of aftermarket car chargers will work only in USB mode despite they are able to supply 1A.
Here you can find some info on USB Charging Ports (shorted D+- pins):
http://en.wikipedia.org/wiki/Universal_Serial_Bus#Charging_ports_and_accessory_charging_adapters
Click to expand...
Click to collapse
Can you post a potential list of car charger which are working at 1mA according to you?
I've only tested few devices:
Extrememac external battery for iPhone/iPad (max 2A) had pins not shorted - USB charging mode on One X (500mA).
Some cheap car adapters - max 1A (according to spec) - USB charging mode on One X.
To fox this problem you should prepare a USB extension cable or micro-usb cable with shorted D+ and D- pins and it should be recognized as AC adapter. I think that also some old HTC phone chargers might come with shorted pins in cable already, but don't know which...
What about the official HTC car charger?
MickyMax said:
What about the official HTC car charger?
Click to expand...
Click to collapse
Yes, that one will charge at the full rate.
There is no list of known good chargers - it's down to luck or a recommendation from someone who found one. You can be sure that any charger advertised as "iPhone, iPad or iPod" compatible will NOT charge your One X at the full rate.
I found one recently in a local petrol station shop. It was £5. I took it apart to have a look and the D+ and D- pins are correctly connected together (via a low value resistor) so it charges at the full rate.
So, I might suggest you look for the cheapest Chinese car charger you can.
USB charging not OK inside a car
zvieratko said:
When charger is "USB", it will not draw more than 500mA from the charger, and usually it will not charge at all (because the current draw with screen on is higher than 500mA).
When charger is AC, it seems to draw 1000mA - but this is still too low to charge while phone is doing anything, as it will draw 700mA and charge ~250mA top.
I hope this can be tuned in kernel, because it sucks, I also hope that power source can be AC (and not battery - look in dmesg when charger is connected), because battery gets too hot when under load...
Click to expand...
Click to collapse
Bingo. I also noticed that when I have the screen on at 100% brightness, GPS and Bluetooth on, i.e. in the car, the USB charger cannot even keep up with the battery drain.
On top of that, the battery gets really hot.
I did not have any of these issues with my SGS2, and frankly, I think it's very disappointing. One should at least be able to stay on the same battery level while doing nothing too fancy and on USB inside a car.
A380 said:
Bingo. I also noticed that when I have the screen on at 100% brightness, GPS and Bluetooth on, i.e. in the car, the USB charger cannot even keep up with the battery drain.
On top of that, the battery gets really hot.
I did not have any of these issues with my SGS2, and frankly, I think it's very disappointing. One should at least be able to stay on the same battery level while doing nothing too fancy and on USB inside a car.
Click to expand...
Click to collapse
There are a lot of factors in the charging current. When you charge, the battery will heat up during the process, especially towards the end of the charging cycle. If you are using your phone at the same time and cause even more heat and charging may slow down to prevent overheating. Also, as mentioned prior, charging slows down as capacity is reached. 100% brightness, GPS, and Bluetooth all on has always walked the fine line of just barely keeping up on my past phones on a 500 mA USB charger. On top of that, this phone is a lot more powerful than an SGS2 and the T3 and big screen produce more heat which may be slowing your charging more.
The problem is a lot of cheap chargers that the phone thinks are USB chargers, not AC chargers, thus causing them to only charge at 500 mA. If you have a proper charger, or a properly modified charger, you should get more like 1A, assuming conditions are right.
In the past I've used Battery Monitor Widget from the Play store to show my charging current on a widget, as well as track and graph battery use, charging current, temperature, etc. Might want to give it a try if you're more interested in charging details.
Im using my htc desire charger and cable (the one that splits in two). It works fine for me but it does take a while to get a full charge. Should i use the charger and cable that came with the phone?
I am using a BlackBerry PlayBook 9V charger and I'm only getting (no more than) 30%-35% per hour while charging.
The Samsung Galaxy Note charged at about 45%-50%per hour.
Is anyone else noticing slow charging rates for the HOX?
Yap, takes over 3 hrs to charge from 5% to 100% with stock charger. With USB from computer about twice as long.
Bigmille said:
Yap, takes over 3 hrs to charge from 5% to 100% with stock charger. With USB from computer about twice as long.
Click to expand...
Click to collapse
for USB it depends they can run from 300 - 500 mA where as the charger is 1 A.
on my computer i get about 20% per hour on USB.
Mine is slow too. Compared to my old "one-button" phone (that shall remain nameless") the HOX is slow to charge.
Anyone try a different charger with better success?
33% per hour here. 3h for a full charge is not that bad.
Sent from my HTC One X using xda premium
Are your HOX rooted with custom ROM? Wondering if it's because of the recovery? It's taking really long to charge. I'm using the stock charger.
Depends on the output of the charger and the cable. Believe it or not, the cable plays an important part in how much charge it can carry.
ArmedandDangerous said:
Depends on the output of the charger and the cable. Believe it or not, the cable plays an important part in how much charge it can carry.
Click to expand...
Click to collapse
Wow, I thought all cables were alike. Can anyone else attest that the cable matters?
lamenramen said:
Wow, I thought all cables were alike. Can anyone else attest that the cable matters?
Click to expand...
Click to collapse
Yes cable matters. I did a experiment too. Installed battery monitor widget which shows input voltage.
when charging through htc cable given with one x it charges at rate of 700+ mah
but when using local cable it charges only at 250+ mah.
I know this phone is Quick Charge 2 capable, but does that apply only to high voltage charging, or also to standard 5V?
I ask because I bought a 3.1A charger, and though the phone was almost dead, it didn't charge any faster than the 1.8A charger that came with the phone. Is the charger defective, or will this phone just not draw 3.1A at 5V?
QC2.0 is 9V at 1.2-1.3A.
Normal 5V is at around 1.7-1.9A only.
It will not draw anything more than what's above. FWIW, IMO, QC2.0 doesn't make a huge difference
lambstone said:
QC2.0 is 9V at 1.2-1.3A.
Normal 5V is at around 1.7-1.9A only.
Click to expand...
Click to collapse
Thanks. So QC is only a protocol for changing voltages, it has nothing to do with negotiating or handling a higher current draw?
fenstre said:
Thanks. So QC is only a protocol for changing voltages, it has nothing to do with negotiating or handling a higher current draw?
Click to expand...
Click to collapse
QC is a protocol for allowing a maximum possible current draw at a predefined voltage. Just because you have a higher possible current supply from a charger it doesn't mean that the G4 will draw more.
E.g. G4 can only draw 1.8A a 5V. If you use a 1A charger, it can only draw 1A but if you use a 2A charger it will only be able to draw 1.8A and not the full 2A.
This phone is **** at charging 1% every 3mins at best. I'm at 44% 23 degrees Celsius and it says 2hour 4min to 100%. Ampere shows its only drawing 480ma on a 2A charger. Three cables.. Note 4 cable, Stock cable and a high quality third-party cable all the same. The cables work fine as they charge to Note 4 quick and a Tab 3.
I give up. I even put this LG poss on ICE to 18 degrees Celsius but still same crap. Night charging for me then. Even Note 4 quick charger can't help it.
Nice phone for sure but I'm going back to Samsung next upgrade, sorry LG.
Sent from my LG-H815 using Tapatalk
skyelm said:
This phone is **** at charging 1% every 3mins at best. I'm at 44% 23 degrees Celsius and it says 2hour 4min to 100%. Ampere shows its only drawing 480ma on a 2A charger. Three cables.. Note 4 cable, Stock cable and a high quality third-party cable all the same. The cables work fine as they charge to Note 4 quick and a Tab 3.
I give up. I even put this LG poss on ICE to 18 degrees Celsius but still same crap. Night charging for me then. Even Note 4 quick charger can't help it.
Nice phone for sure but I'm going back to Samsung next upgrade, sorry LG.
Sent from my LG-H815 using Tapatalk
Click to expand...
Click to collapse
Laters.
skyelm said:
This phone is **** at charging 1% every 3mins at best. I'm at 44% 23 degrees Celsius and it says 2hour 4min to 100%. Ampere shows its only drawing 480ma on a 2A charger. Three cables.. Note 4 cable, Stock cable and a high quality third-party cable all the same. The cables work fine as they charge to Note 4 quick and a Tab 3.
I give up. I even put this LG poss on ICE to 18 degrees Celsius but still same crap. Night charging for me then. Even Note 4 quick charger can't help it.
Nice phone for sure but I'm going back to Samsung next upgrade, sorry LG.
Sent from my LG-H815 using Tapatalk
Click to expand...
Click to collapse
What. You're using a **** charger. Get a proper charger. I know because I've tried mine on a **** charger, a Samsung Charger and an ASUS QC2.0 Charger. Nobody has the problems but you.
lambstone said:
What. You're using a **** charger. Get a proper charger. I know because I've tried mine on a **** charger, a Samsung Charger and an ASUS QC2.0 Charger. Nobody has the problems but you.
Click to expand...
Click to collapse
Ok... Note 4 charger, Tab 3 charger and Stock charger all sh#t chargers? Hmmmm OK.
My supposed sh#t chargers work fine on other phones. I guess i bought a sh#t phone. Anyway love the phone hate the charging. Cheers
Sent from my LG-H815 using Tapatalk
Proper cable. Settled:good:
skyelm said:
I guess i bought a sh#t phone.
Click to expand...
Click to collapse
It does sound defective, unfortunately. Mine charges at up to 1%/minute, and that's without a QC 2.0 charger.
I use LG stock charger and a third party 2.1A charger to charge, Ampere shows that it has around 1000 mah. Apart from the charger, the charging cable quality do affect the result too. Try to swap cable and test again.
IMO﹐stock charger with 5V 1.8A can charge quite fast with 2+ hours to fully charged from 0 to 100%, no need to go for QC2.0.
Sent from my LG G4 H818N using Tapatalk 4
I have found that my Original Samsung 2.1A charger sucks for the G4. Somehow it knows its a Samsung and doesnt want to provide anything over 1A. That charger charges at 2A my Galaxy S4. It takes like 3-4 hours to full charge from under 15%.
My LG G4 charges fkn fast with the original one and a Tronsmart QC charger. 1% every minute.