Develop Bugs

Shocking Battery Story..

I've just driven over 400 miles...
I was using my Desire with Co Pilot to navigate me from Scotland to Bristol...
The phone was in my phone holder which is placed in the cigarette lighter so the phone can apparently be charged at the same time as being held...
The phone showed that it was "charging" and yet it still ran out of power....
That's right.. the CHARGING phone RAN OUT of power and switched off!!!!!!! TWICE!!!!!!!!
Has anyone else experienced this? I can't imagine that this phone uses more power than the charge being applied?!

I used my Desire as GPS (with Copilot) the phone had 70% - 80% battery and after sometime it actually charged to 100%. Maybe there is some malfunction in your car charger or just not making a good contact in cigarette lighter plug. Check if charger's led lights all the time.

car chargers trickle charge so they prob couldn't keep up with the demands of CoPilot on the phone

EddyOS said:
car chargers trickle charge so they prob couldn't keep up with the demands of CoPilot on the phone
Click to expand...
Click to collapse
You need to ensure that the car charger is rated at 1AMP at 5V otherwise it will as stated only trickle charge. I've heard this story on other devices. Do you have a genuine HTC charger?
Also if the device gets to warm, it will stop charging in order to avoid damage.

Thanks for the reply guys!
No, it's not a geniune one... I tried 2 different ones, both the universal holder/chargers from Mobile Fun..
So far they've both been fantastic until this little phone came along...!
Connections have been fine, which is the strange thing..
It did get hot though, so you may be right Ardsar... Any way of keeping it cooled?

Buy OEM...
http://www.google.co.uk/products?q=...ient=firefox-a&price2=15.00&show=dd&scoring=p
Always best as you know that it'll work...

i have had the same problem plugging it into my computer and using it at the same time killed it.

charmz2k2 said:
I've just driven over 400 miles...
I was using my Desire with Co Pilot to navigate me from Scotland to Bristol...
The phone was in my phone holder which is placed in the cigarette lighter so the phone can apparently be charged at the same time as being held...
The phone showed that it was "charging" and yet it still ran out of power....
That's right.. the CHARGING phone RAN OUT of power and switched off!!!!!!! TWICE!!!!!!!!
Has anyone else experienced this? I can't imagine that this phone uses more power than the charge being applied?!
Click to expand...
Click to collapse
me
http: //forum.xda-developers. com/showpost.php?p=6075788&postcount=11
http: //forum.xda-developers .com/showthread.php?t= 658338 (delete the spaces)

Same as what others say as well. Your car charger doesn't supply enough amps to keep up.
Ofcourse it gets really hot, navigation is one of the most heavy thing you can do on the phone. And while doing that you charge it at the same time in perhaps a warm car as well.
But, get a 1A charger, not a 500mah like most are.
Same goes for hooking it on the computer, the usb port might not give enough power so the phone can drain itself when doing real heavy stuff.
Plugging something in does not guarantee it will work, you have to know what you plug in

casualt said:
i have had the same problem plugging it into my computer and using it at the same time killed it.
Click to expand...
Click to collapse
Of course you will - USB ports can only supply upto 500mA if you have nothing else connected to the USB HOst.

Same story for me.
I got a 550 mA car charger, and battery wasn't charging but slowly discharging (about 5-10% per hour) with navi+HDSPA.
Thought, well, 550 mA is not enough, let's see the plug charger from Desire box: that's 1000 mA. Let's go get a 1A car charger.
Got this www . p4c.philips. com/cgi-bin/dcbint/cpindex.pl?ctn=DLM2206/10&slg=it&scy=IT (saw off spaces) which is rated 5V-1A.
Plugged in, started navigating+HDSPA for satellite layer, and still wasn't charging but discharging at a rate of about 4% per hour.
I'm really annoyed 'bout this, I spent 20+15€ for both chargers, I do not want to spend another 25€ for OEM charger....it's unbelivable that I'd finish to buy 60€ of chargers to find out one that do not let battery deplete.
As a final test, I'll try a different cable from original HTC sync cable included in the box...let's see.

EddyOS said:
Buy OEM...
http://www.google.co.uk/products?q=...ient=firefox-a&price2=15.00&show=dd&scoring=p
Always best as you know that it'll work...
Click to expand...
Click to collapse
Can anyone who has used this confirm it will manage to charge fully even while the Desire is running a satnav program?

Why don't you plug in your normal charger and start running a navigation demo or something.
Not sure if that uses as much energy, but I think it most probably will. The original charger outputs 1A.
If the socket charger does the job, but not the car charger (read: you can also run a navigation demo in the car using that charger) your car charger might not be supplying enough energy as it should.
Or you can use a multimeter and see how many amps it outputs. But the pins are a bit smallish

Tried with another cable (not the original sync one) with just power wires connected, same story: I'll try with the original wall plug charger and see if it does the same or not, as both the Philips charger and the original HTC wall charger are rated 5V-1A

It does get very hot. I used my gps for 9 hours in a row and at the end it got too hot or something and the phone just rebooted.
Still It wasn't because the battery had run out of juice it was still good.
Also it was streaming music over bluetooth at the same time.

Used Nav for 1 hour this morning on the way to work while charging from the official HTC car charger. Phone now sat on my desk, battery reporting 100%.
The phone did get pretty hot though...

FlatEric83 said:
Same story for me.
I got a 550 mA car charger, and battery wasn't charging but slowly discharging (about 5-10% per hour) with navi+HDSPA.
Thought, well, 550 mA is not enough, let's see the plug charger from Desire box: that's 1000 mA. Let's go get a 1A car charger.
Got this www . p4c.philips. com/cgi-bin/dcbint/cpindex.pl?ctn=DLM2206/10&slg=it&scy=IT (saw off spaces) which is rated 5V-1A.
Plugged in, started navigating+HDSPA for satellite layer, and still wasn't charging but discharging at a rate of about 4% per hour.
I'm really annoyed 'bout this, I spent 20+15€ for both chargers, I do not want to spend another 25€ for OEM charger....it's unbelivable that I'd finish to buy 60€ of chargers to find out one that do not let battery deplete.
As a final test, I'll try a different cable from original HTC sync cable included in the box...let's see.
Click to expand...
Click to collapse
FYI, not all chargers are equal. I believe that HTC devices need a combination of pins to be connected on the USB port to "tell" the phone that it's connected to a real charger and not a USB port, otherwise the phone will only pull 0.5A, regardless of the output capacity of the charger.
This always used to apply to older HTC phones, and I can't see why they'd change it, so it's quite possible that your 1A Philips charger will not charge the same as my 1A HTC charger...
If in doubt, OEM

daern said:
FYI, not all chargers are equal. I believe that HTC devices need a combination of pins to be connected on the USB port to "tell" the phone that it's connected to a real charger and not a USB port, otherwise the phone will only pull 0.5A, regardless of the output capacity of the charger.
This always used to apply to older HTC phones, and I can't see why they'd change it, so it's quite possible that your 1A Philips charger will not charge the same as my 1A HTC charger...
If in doubt, OEM
Click to expand...
Click to collapse
That's what I thought, as I imagined that: I hoped that another cable I have, which has USB on one side and a 2 poles connector on the other side on which you connect various connectors, would be recognized by Desire as being a pure power cable. I wasn't lucky.
Since OEM is out for 25€, I tried with non OEM before to save some, but till now I buyed 35€ worth chargers, I'd have to stick with OEM
But now I'm really reluctant on getting OEM, since I do not want to end with spending 60€ in order to have my phone charged while navigating....I'll try to tinker some, and if I'll find out how, I'll report

I had the same problem by using a 1.5A car charger which is working great with iPhone.
As for the PC USB charge... are you sure it can't output 1A to charge the device??

JapanLover said:
I had the same problem by using a 1.5A car charger which is working great with iPhone.
As for the PC USB charge... are you sure it can't output 1A to charge the device??
Click to expand...
Click to collapse
USB2 specs do say that ports shall provide max 500 mA, ehnce motherboards have this limit.
BTW, here's a discussion I've found about the "cable" problem
forum.xda-developers. com/archive/index.php/t-643808.html
For HD2 (which is actually the model to which HTC CC C200 is dedicated)
I'll try to tinker with some cheap cable and see if this works.

Phone charging and Satnav...is this normal?

Just been on a long run and used the satnav ( google ), and the whole time it was plugged into the cigarette lighter charger.
Despite this, the battery level was running down
Is this normal - that the battery drain using the satnav/gps is greater than the charging rate?

I used mine yesterday for about a 1/2 hr journey, was not plugged in, but batterey was down to about 30%, also seemd to use about 20mb for 15 miles, so watch your usage.

J-Zeus said:
Just been on a long run and used the satnav ( google ), and the whole time it was plugged into the cigarette lighter charger.
Despite this, the battery level was running down
Is this normal - that the battery drain using the satnav/gps is greater than the charging rate?
Click to expand...
Click to collapse
Its been discussed already, your charger is not powerful enough to charge it when using satnav, so the end result is that your charger is just slowing down the discharge. Happens when you are using 3rd party accessories.

Ah - That makes sense -- where can I get a decent one - at a decent price

I'm using the factory supplied lead and still get the same, also used to be a problem with my Touch Diamond 2 WinMo Phone, was hoping Desire would be better and it is... just... If I make sure it is fully charged before I set off I can do about 3 hours with it plugged in before it goes flat, I just keep switching it off while I know where I'm going and only switching it on when I don't! That way you can make it last until it is needed.
Another thing to check is that it is kept cool enough to charge, again, in common with my older HTC winmo phone, the Desire gets very hot while being used for GPS and this can be worse if it is in sunlight on your windscreen, sometimes this can stop it charging at all, (you can tell its in this state because the indicator light blinks alternately orange and green) I angle a vent so its blowing cold air on the phone and that seems to do the trick.
Weird thing with the Desire is that for me it shows the green charge light and battery full indicator right up till it is nearly dead... rather than showing that it is draining
I've also noticed with the Desire that even If I'm just browsing the web it drains quicker than it can charge, even using mains charger, I often get a message "the current is insufficient, please connect to AC" or something like that (when it is already plugged in)
I don't think the in car charger you use would make a big difference, the current/voltage for your cigarette lighter socket is limited by the vehicle electrics (I know mine is fused at 15 amps)
Pauly

You need a charger which supplies 1A. Most 12v cigarette lighter chargers only supply 500mA
I use this one, and plug the USB cable into the "quick charge 1A" socket
http://www.argos.co.uk/static/Product/partNumber/5140927/Trail/searchtext>BELKIN+CHARGER.htm

Are you using Bruts worldwide maps mod? I just installed it. I ran it for literally only 5 minutes, but my phone got really hot and the battery monitor shows the app used 10% of the charge (the phone has been unplugged for 24 hours). I have a strong suspicion that this app is faulty.
-------------------------------------
Sent via the XDA Tapatalk App

This has been discussed and solved here http://forum.xda-developers.com/showthread.php?t=670702
Basically most usb car chargers (even 1a rated ones) are recognised by your phone as a data connection and to protet delicate computer usb circuits will only draw 500mAh where your phone requires 950mAh.
An easy mod of either the charger or a data cable will solve the problem. Your charger MUST be able to supply up to 1a.

zzleezz said:
This has been discussed and solved here http://forum.xda-developers.com/showthread.php?t=670702
Basically most usb car chargers (even 1a rated ones) are recognised by your phone as a data connection and to protet delicate computer usb circuits will only draw 500mAh where your phone requires 950mAh.
An easy mod of either the charger or a data cable will solve the problem. Your charger MUST be able to supply up to 1a.
Click to expand...
Click to collapse
Thats why I use the Belkin one, it detects it as a charger only and charges at full rate when plugged into the 1A socket.

High current car charger

Anybody come across a car charger that is high current like the HTC wall charger?

Most car chargers are classified as "rapid".

Anything designed to charge an iPad (2.1A versus the typical 1A) will give you plenty of juice. I use the Scosche reVIVE II with Pandora, Bluetooth, and GPS Navigation all on and still have enough power to positively charge my battery.
Fair warning, though, this will cause the phone to get real hot (I've had the overheating warning lights flash twice so far), so make sure you have plenty of ventilation around the phone, keep it out of the sun, etc etc.

Any charger that is at least 1 amp. will do. The phone 'pulls' a max of around 0.85 amps. No need for more then 1 amp.
If it has a replaceable cable, it must be the heaviest gauge, shortest cable, that you can use. I have seen long cheap thin cables that drop over a volt, and the Thunderbolt charges really slowly.
The charger or cable have to state that they for rapid charging. To rapid charge, you need to have the USB D- and D+ lines shorted. If that are not shorted, the Thunderbolt limits the charge current to around 0.35 amps. thinking it is connected to a PC. If they are shorted, letting the Thunderbolt know it can be rapid charged, you get up there around 0.85. You can easily modify the charger for high rate if it is good for at least an amp.
And in the end is heat. Heat and lots of it. It will damage the battery. So put it out of the sun and in cool air like near a vent.

Motorola Rapid Charger on Amazon is the best. I bought two.
http://www.amazon.com/Motorola-Vehi...Q9CA/ref=sr_1_1?ie=UTF8&qid=1309959388&sr=8-1
Review off Amazon
Genuine Motorola charger in retail packaging. 4.75-5.25V 950mA output, works w/ most micro-USB phones like Incredible, etc., June 11, 2010
By
David Pearlman "sound fanatic" (Arlington, MA) - See all my reviews
(TOP 500 REVIEWER) (VINE VOICE) (REAL NAME)
Amazon Verified Purchase(What's this?)
There are so many sketchy sellers selling phone chargers out there, that it can be a bit scary. The problem is that if the charger is poorly made, the output of the charger can be out of spec and can, in some cases, fry the phone you connect to it.
For that reason, when it comes to phone chargers, you should stick to name brands. (They are all made in China, but the name brand ones are usually subject to stricter QA).
When I found this charger on Amazon, SOLD BY AMAZON, I jumped on it. It's a MICRO USB car charger, made for Motorola and sold under the Motorola name, in retail packaging. The rated output is 4.75-5.25V and 950mA.
This charger should work fine with most any phone that uses the MICRO USB connector. The key number to pay attention to is the second one, the rated amperage. This is the MAXIMUM amount of current that the phone can request from the charger. A typical USB port on a PC provides as little as 100mA, and few provide more than 500mA. So this charger should charge your phone faster than when it's connected to a PC. A few phones out now can use up to 1000mA. But that just means they CAN use that amount. If 950mA is provided, they'll still charge, just a bit more slowly.
Note that the amperage (second number) merely tells you how much the charger CAN supply, if requested. The phone itself is responsible for asking for the current. That is to say, if this charger can provide 950mA, but your phone can only use 300mA--no problem. Your phone asks for 300mA and the charger provides all of what is requested. If, on the other hand, your phone can use 1000mA, this charger will provide all it can, which is 950mA--a wee bit less than the max asked for. That's also not a problem; it just means your phone will charge a little bit (not much in this case) more slowly. The rated voltage for this charger is presented in a range of 4.75-5.25V. The "ideal" voltage for a USB charger of any type if 5V. And most chargers for home use are rated right at 5V. But car chargers work in a noisier environment and thus you have the range. This is where a cheapo charger can really do damage, as some of them are poorly regulated and can provide voltages that are WAY out of spec. Again, when you can get a name brand charger from a seller you can trust (Amazon) for such a reasonable price, it's very foolish to consider the cheapo no-names.
This is an excellent quality name brand travel micro USB charger at a price that beats the no-name junk from third party sellers. What's not to like?
BE SURE TO ORDER IT FROM AMAZON AND NOT ONE OF THE THIRD PARTY SELLERS, as some of those have been known to make mistakes with respect to what they ship relative to the listing. I can confirm that Amazon is shipping the P513 /89143N charger, as pictured.
Click to expand...
Click to collapse

ddgarcia05 said:
Motorola Rapid Charger on Amazon is the best. I bought two.
http://www.amazon.com/Motorola-Vehi...Q9CA/ref=sr_1_1?ie=UTF8&qid=1309959388&sr=8-1
Review off Amazon
Click to expand...
Click to collapse
I've been contemplating buying this one, but I'd like to ask you if it charges your battery with navigation+music going? I have a usb charger in my truck, and with both of those going it just manages to keep my battery level where its at, sometimes losing a % or two.

kr0n1c said:
I've been contemplating buying this one, but I'd like to ask you if it charges your battery with navigation+music going? I have a usb charger in my truck, and with both of those going it just manages to keep my battery level where its at, sometimes losing a % or two.
Click to expand...
Click to collapse
From what I've read in the past here on XDA and on the reviews for the charger (on amazon) you shouldn't have a problem. The second review for the charger on amazon states that the reviewer was looking for a charger which actually charged his phone will using GPS and that he found it. It's a very well built charger and cheap. It's made my Motorola and sold by Amazon so buy with confidence.

kr0n1c said:
I've been contemplating buying this one, but I'd like to ask you if it charges your battery with navigation+music going? I have a usb charger in my truck, and with both of those going it just manages to keep my battery level where its at, sometimes losing a % or two.
Click to expand...
Click to collapse
It does indeed charge. I've had it since my original Droid and was concerned when I updated to the TB but it will charge the TB no matter what you're doing (I've had Nav running while on a phone call with BT and searching the internet and it still showed it was charging). Just be prepared for your phone to get HOT!! Great charger.

worwig said:
Any charger that is at least 1 amp. will do. The phone 'pulls' a max of around 0.85 amps. No need for more then 1 amp.
Click to expand...
Click to collapse
Actually, the phone will pull more than 850 mA. You're probably basing that on using a battery monitor, which only shows the flow of current into/out of the battery. I've seen 800 mA into the battery at the same time I have display, GPS and a phone call going, which is definitely more than an additional 50 mA. It wouldn't surprise me if the phone can take advantage of something more than 1A, since I see a battery drain of more than 200 mA with all of that going when not on the charger.

kr0n1c said:
I've been contemplating buying this one, but I'd like to ask you if it charges your battery with navigation+music going? I have a usb charger in my truck, and with both of those going it just manages to keep my battery level where its at, sometimes losing a % or two.
Click to expand...
Click to collapse
I have that Motorola charger and am a heavy GPS user. It charges the battery as if it were plugged into the wall. You'll be very satisfied.

mike.s said:
Actually, the phone will pull more than 850 mA. You're probably basing that on using a battery monitor, which only shows the flow of current into/out of the battery. I've seen 800 mA into the battery at the same time I have display, GPS and a phone call going, which is definitely more than an additional 50 mA. It wouldn't surprise me if the phone can take advantage of something more than 1A, since I see a battery drain of more than 200 mA with all of that going when not on the charger.
Click to expand...
Click to collapse
No, that was measured at the 5 volt power supply, based upon a lab power supply. I did a lot of experimenting when I developed the charger and phone mount for my motorcycle. And to get the 850ma from the power supply, I used a very short, maybe 8 inch, USB cable, and a charge voltage close to 5.3 volts. With 5 volts at the power supply, it would only pull about 650ma from the power supply. That was due to the voltage drop in the USB cable. With the 5.3 volts at the power supply, I was getting close to an actual 5 volts at the Thunderbolt. I never measured the current at the battery, but I could see it being a bit more then the 850ma in, if there were a switch mode supply in there.
Though I like the Battery Monitor widget as a rough guide, I never tested to see if the battery current and the battery monitor are accurate.

Does anyone know if the included HTC ac adapter and cable will charge faster than using your pc with the included USB cable?

happimeal said:
Does anyone know if the included HTC ac adapter and cable will charge faster than using your pc with the included USB cable?
Click to expand...
Click to collapse
Absolutely.
A PC USB port is limited to under 500ma. The Thunderbolt appears to to limit PC USB draw to about 350ma. I haven't measured the actual current in the HTC charger, but it is a high current charger, and charges my Thunderbolt very quickly. Battery Monitor widget shows high battery charge rates. I suspect it is getting near the max rate up near 1 amp.

worwig said:
Absolutely.
A PC USB port is limited to under 500ma. The Thunderbolt appears to to limit PC USB draw to about 350ma. I haven't measured the actual current in the HTC charger, but it is a high current charger, and charges my Thunderbolt very quickly. Battery Monitor widget shows high battery charge rates. I suspect it is getting near the max rate up near 1 amp.
Click to expand...
Click to collapse
HTC charger states 5V/1A on the charger itself.

You can use the Palm car charger for $3.75+tax, free shipping. it is 5V/1A, same rating as the HTC wall charger.
Go here for 25% off
http://www.wireless.att.com/cell-ph...otion/accessories.jsp?source=EC0A0011600jtl10
Add product here, must add to cart to see 25% discount.
http://www.wireless.att.com/cell-ph...027&q_sku=sku4720234&q_manufacturer=&q_model=
Also, if so inclined, you can lop the top off of the charger so that you can use any usb cable (ipod, iphone, anything)

dpham00 said:
HTC charger states 5V/1A on the charger itself.
Click to expand...
Click to collapse
That doesn't mean much. That is the MAX the charger can output. The amount that the Thunderbolt will pull varies. If it thinks it is plugged into a USB, it will be less then 500ma. even if the charger is capable of 10 amps.

worwig said:
That doesn't mean much. That is the MAX the charger can output. The amount that the Thunderbolt will pull varies. If it thinks it is plugged into a USB, it will be less then 500ma. even if the charger is capable of 10 amps.
Click to expand...
Click to collapse
i have used the Palm car charger, checking with bmw, it shows around 850ma, same as on my htc charger.

worwig said:
Any charger that is at least 1 amp. will do. The phone 'pulls' a max of around 0.85 amps. No need for more then 1 amp.
If it has a replaceable cable, it must be the heaviest gauge, shortest cable, that you can use. I have seen long cheap thin cables that drop over a volt, and the Thunderbolt charges really slowly.
The charger or cable have to state that they for rapid charging. To rapid charge, you need to have the USB D- and D+ lines shorted. If that are not shorted, the Thunderbolt limits the charge current to around 0.35 amps. thinking it is connected to a PC. If they are shorted, letting the Thunderbolt know it can be rapid charged, you get up there around 0.85. You can easily modify the charger for high rate if it is good for at least an amp.
And in the end is heat. Heat and lots of it. It will damage the battery. So put it out of the sun and in cool air like near a vent.
Click to expand...
Click to collapse
um, i am aware that any charger that will do 1A will do. that was my question, what car charger will do 1A. Alot of times, they dont have that info listed on pages that are selling them.
and the whole thing about the D- and D+ shorted together, i do not believe. the HTC cable that came with the phone does rapid charging and i use it for data all the time too. if they D- and D+ was shorted, i would not be able to use it for data transfer. not unless the HTC charger shorts them internally inside the charger.

leoingle said:
unless the HTC charger shorts them internally inside the charger.
Click to expand...
Click to collapse
Bingo!!

leoingle said:
um, i am aware that any charger that will do 1A will do. that was my question, what car charger will do 1A. Alot of times, they dont have that info listed on pages that are selling them.
and the whole thing about the D- and D+ shorted together, i do not believe. the HTC cable that came with the phone does rapid charging and i use it for data all the time too. if they D- and D+ was shorted, i would not be able to use it for data transfer. not unless the HTC charger shorts them internally inside the charger.
Click to expand...
Click to collapse
Yes, it is hard to find the current info online or even on the package sometimes.
Yes, it is shorted in the charger. I have seen it done in the cable and the cable can't be used for data of course. Not sure why anyone would do that, but they do.

Compatibility with Nokia fast microUSB chargers

The Samsung charger adapter which comes in the box is very slow in nature. It take more than 2 hours to charge my phone. I was wondering if I can use the following Nokia brand chargers which are fast chargers?
Nokia Charger Adapter CA-146C
Nokia Fast Micro-USB Charger AC-10

It won't make any difference the phone decides what current it draws from the charger, so it'll take just as long to charge.

Are you really sure about this? Can you link me to some articles which confirm this.
Even I was thinking about purchasing AC-10 charger from Nokia.

How fast is the nokia charger?
0-10% -> 100% in an hour or less?

Joey2o11 said:
It won't make any difference the phone decides what current it draws from the charger, so it'll take just as long to charge.
Click to expand...
Click to collapse
I'm not sure about this. I have a friend with a Blackberry Playbook and he reckons his phone charges much faster if he uses the charger from that.
The "stock" S2 charger is 700mA - it doesn't take a genius to work out that for a 1650mAh battery this will take about 2.5 hours to fully charge the battery under ideal conditions (phone off) or anything from 3-6 hours with the phone on, depending all what's running or if you're using the phone while it's charging.
Which is all pretty ridiculous - ok we're comparing apples and oranges when we compare a S2 to the likesw of a Nokia, but I do miss the days when I could charge my phone in an hour and have it last two or three days. I thought my Blackberry was bad but at least I can usually squeeze a full day out of it...
The only wall wart I had lying around that was more than 700mA was a 5V 2A supply. I've tried with that which works, but the phone chokes with a "battery overtemp" warning after about 10 minutes - which tells me I AM pumping more into the battery than it can handle. This would suggest that there IS a happy medium where we can optimize the battery charge time - I'm bust looking for a 1A supply...

I have TWO AC-10Xs, and am using it with the Ninphetamene kernel (which comes with increased charge input mods to 800ma) fine. Charges to full in about 2.5-3 hours.
I've never gotten overcharge errors either.

Hi,the usage of more powerful charger will eventually reduce lifespan of your battery. This comes from basic physics, materials and so... Higher mA means faster current, which wear the material of the capacitor - battery.

I have capdase 2 USB car charger that was used for my old iphone device.
It outputs 1A.
is it safe to use it?
I tried to charge with it for 10-15minutes or so, and didnt recognize any suspicious warmups...it reached 41~degrees while at the moment im charging and using it as a hotspot and its on 38 degrees.

DobermanS said:
Hi,the usage of more powerful charger will eventually reduce lifespan of your battery. This comes from basic physics, materials and so... Higher mA means faster current, which wear the material of the capacitor - battery.
Click to expand...
Click to collapse
The phone (specifically, the kernel) limits charge coming in, and there MUST be hardware limiters on the batteries and the phone themselves (which, in some cheapo batteries DON'T WORK and results in them frying themselves and the phone in process) and the batteries are replaceable anyway.

eranyanay said:
I have capdase 2 USB car charger that was used for my old iphone device.
It outputs 1A.
is it safe to use it?
I tried to charge with it for 10-15minutes or so, and didnt recognize any suspicious warmups...it reached 41~degrees while at the moment im charging and using it as a hotspot and its on 38 degrees.
Click to expand...
Click to collapse
i use htc wall charger rated at 1A and having no proplem with ,a pc USB port is capable of 1A and we all know there are no problem ,even so there are no visible improvement in charging time because as someone said the charging current is automatically regulated

ledavi said:
i use htc wall charger rated at 1A and having no proplem with ,a pc USB port is capable of 1A and we all know there are no problem ,even so there are no visible improvement in charging time because as someone said the charging current is automatically regulated
Click to expand...
Click to collapse
That's good to know that the current is regulated by the device.
Is there a software to see what is the current taken by the phone?
As long ad the temperture isn't higher than 45degrees is it ok?
By the way, Im pretty sure that usb outputs 0.5A and not 1A
Sent from my GT-I9100 using XDA Premium App

battery monitor widget

It seems logical to be able to use all chargers as smartphones all have micro usb .
(I 'm not sute that's mean something in english, sorry)

Great widget! thanks.
I really like the data it gives!
Sadly, while charging with my .7A original charger & meanwhile giving a hotspot to my laptop, it shows that only 76mA comes in!
hehe, gonna take forever to charge the battery this way.

i doubt this. i'm still worried about the compatible problem~~~

After two days with the battery monitor widget Im affraid itself it drains the battery.
could it be it affects the battery?
settings are regular, it monitors changes every 60seconds

Let's see if I can help make things a bit clearer. Feel free to correct where I may be off.
The Nokia thing, it's not a charger. It's a power supply.
The "charger" is built into your phone, hardware-wise.
How can I prove it?
Take the Samsung supplied cable, plug it into your computer. You'll see that your phone is charging too. No, the cable is not a charger. Do you think your computer is a special built charger for your phone? Hardly.
The charging circuit is within the phone, and thus charging the battery when there's available power.
Ok, so we have the charger (i.e. the mobile phone), we have the battery, we need the power. Where do we get power from? The wall adapters (or computers). So what are the wall adapters? Ratings of 1000mah means that the wall adapter can provide up to 1000ma per hour.
However, your charging circuit will determine how much current to actually draw. For example, drawing 800mah for 10 min may raise the temperature to 55 degrees, so after 10 min the charging circuit drops the charging current to 500mah.
Of course, if you're using el cheapo cables, some cables may not be able to support the current draw and you may find that even with 20000000mah power supplies your phone can only draw 100mah.
The SGS2 heats up pretty easily, and it doesn't quite draw beyond 700mah. The circuit built into the phone doesn't allow it to, if i'm not wrong. If your phone is overheating while charging, you better change your case as it's going to cause your phone to overheat sooner or later.
Using a 20000000mah power supply isn't an issue, because the charging circuit within the phone will be able to draw only a certain amount.
Me, I plug my SGS2 into a 2Ah charger every night to charge, and yes it's perfectly fine. I'm only upset that after buying an expensive 2A charger, I realised that the phone is not able to draw high currents (phone even heats up to 55degree Celsius when charging).
Charging the phone on a ice pack (which lowered the phone temperature to 16 degrees while charging) didn't increase the amount of current drawn by the phone, even on a 2A power supply.
My humble advise is, stick with the stock power supply, or at most get a 1A version. No need to splash for a 2A power supply. If you really need faster charging, get a battery charging dock.

eranyanay said:
After two days with the battery monitor widget Im affraid itself it drains the battery.
could it be it affects the battery?
settings are regular, it monitors changes every 60seconds
Click to expand...
Click to collapse
yes of course it does. It consumes a certain amount of ma per hour, doesn't it?
Personally, there's a app called watchdog, look for it, IMHO it helps to catch rouge apps better, and manage battery better.

I thought the whole idea of having a universal micro USB charging connection across most good brands was so you could use other chargers!

moooxooom said:
yes of course it does. It consumes a certain amount of ma per hour, doesn't it?
Personally, there's a app called watchdog, look for it, IMHO it helps to catch rouge apps better, and manage battery better.
Click to expand...
Click to collapse
Well I just like the widget, which shows me also the battery temperture
I hope it doesnt takes too much

12/24v dc output 5v 1000mA good for one x? Car charger

Thats the one i used for galaxy s2.... Is it good for one x?
Tnx!!

Maybe. If it charges and says USB, it's maxing at 500mA, if it says AC, it'll be eating up to 1000mA and will charge faster.

BenPope said:
Maybe. If it charges and says USB, it's maxing at 500mA, if it says AC, it'll be eating up to 1000mA and will charge faster.
Click to expand...
Click to collapse
Can it harm the device?

the device will only take what current it needs from the source (so no, no damage). as benpope says if its charging in usb mode it will be limited to 500ma, and in normal mode itll be 1A
you can check what mode by viewing the battery settings when charging and itll say whether its AC or USB charging.

Is it means i can use IPAD's powerful charger to charge my ONE X faster without harm it or it's battery ?

rommark said:
Is it means i can use IPAD's powerful charger to charge my ONE X faster without harm it or it's battery ?
Click to expand...
Click to collapse
It depends. The iPad uses Apple's proprietary connector, which is a different connector to the microUSB on the HTC One X. However, if your iPad's charger has a USB port for you to connect the HOX's data cable to the charger, then it should be fine. I do want to warn you though, I enquired about using car chargers in a Nissan service center and they said that they have had instances of non-fused car chargers causing the car's own fuse to blow. Also, do keep your car engine running when charging as your phones takes quite a considerable amount of power to charge, and may completely drain your car's battery if there is no engine running to recharge it.