Can someone help me with this? I think i've tried just about everything.
Specs:
sprint samsung galaxy s3 - phone
CDMA Tools DFS Demo version 4.0.0.5 - software
windows 7 ultimate 64 bit
Problem:
DFS seee the 'samsung mobile usb serial port' in the upper window of the port manager, but it does not appear on the 'devices online' portion. i have successfully had those ports appear there, but its like a flash in the pan on and off, and i have successfully flashed the phones but my goal was unsuccessful. since then DFS has stopped recognizing my s3.
I've put the galaxy into diag mode ##DIAG# and set it to CDMA Modem, and DM + MODEM + ADB for USB setting.
i have/had samsung galaxy s3 driver installed as well as generic samsung USB drivers installed.
I've done a combination of uninstalling and reinstalling them with no luck.
i've disabled kies.
i've factory reset the s3 and tried DFS with no luck.
i've uninstalled DFS and reinstalled different version with no luck.
i've gone into the registry and reset the port com values with no luck.
============================================
what i'm trying to do:
Get sprint s3 onto verizon prepaid. i have the following:
samsung gusto 2 (with 60$ of prepaid minutes)- donor phone
verizon fascinate s1 - dmu donor
sprint samsung galaxy s3 (naturally)
and i cant seem to get data to work on the s1 (calls and text work). i tried and tried but i'm having some major issues.
it was this thread's instructions i was following:
http://forum.xda-developers.com/showthread.php?t=1473141
and this thread
http://forum.xda-developers.com/showthread.php?t=1210240
i'd be very grateful for any input here
thanks
BUMP!!! Please I am having the same issue. I want to flash a Sprint version to Cricket Wireless but the phone has stopped being recognized, it only show up as a com port but there is no actual recognition of the phone by DFS, QPST, even CDMA workshop doesnt connect to it. Please helP
Ok its working for me but I suspect this is just temporary. Ok mine is a sprint s3 so I don't know if this works with other phones but instead of ##diag# I used *#7284# and I also plugged it into another usb port on my comp. I'm pretty sure our problem will occur again but for now it's working.
Sent from my SPH-L710 using xda app-developers app
Help Pleaseee!!!!!!!!
zen_phones said:
can someone help me with this? I think i've tried just about everything.
Specs:
Sprint samsung galaxy s3 - phone
cdma tools dfs demo version 4.0.0.5 - software
windows 7 ultimate 64 bit
problem:
Dfs seee the 'samsung mobile usb serial port' in the upper window of the port manager, but it does not appear on the 'devices online' portion. I have successfully had those ports appear there, but its like a flash in the pan on and off, and i have successfully flashed the phones but my goal was unsuccessful. Since then dfs has stopped recognizing my s3.
I've put the galaxy into diag mode ##diag# and set it to cdma modem, and dm + modem + adb for usb setting.
I have/had samsung galaxy s3 driver installed as well as generic samsung usb drivers installed.
I've done a combination of uninstalling and reinstalling them with no luck.
I've disabled kies.
I've factory reset the s3 and tried dfs with no luck.
I've uninstalled dfs and reinstalled different version with no luck.
I've gone into the registry and reset the port com values with no luck.
============================================
what i'm trying to do:
Get sprint s3 onto verizon prepaid. I have the following:
Samsung gusto 2 (with 60$ of prepaid minutes)- donor phone
verizon fascinate s1 - dmu donor
sprint samsung galaxy s3 (naturally)
and i cant seem to get data to work on the s1 (calls and text work). I tried and tried but i'm having some major issues.
It was this thread's instructions i was following:
http://forum.xda-developers.com/showthread.php?t=1473141
and this thread
http://forum.xda-developers.com/showthread.php?t=1210240
i'd be very grateful for any input here
thanks
Click to expand...
Click to collapse
so did you get 3g working?? Im stuck at this point. Sprint s2 flashed to verizon with working talk and text. Mc gusto 2 and i need that gin and juice. Lol. Naw.. But help me my friend.... Thanks in advance.
MajorCinema said:
so did you get 3g working?? Im stuck at this point. Sprint s2 flashed to verizon with working talk and text. Mc gusto 2 and i need that gin and juice. Lol. Naw.. But help me my friend.... Thanks in advance.
Click to expand...
Click to collapse
Still not working. Try following the thread nevell posted on flashing spring s3 to Page plus. And don't let this signature fool u I'm posting via wifi lol
Sent from my SPH-L710 using xda app-developers app
Man its working my nerves
zen_phones said:
Still not working. Try following the thread nevell posted on flashing spring s3 to Page plus. And don't let this signature fool u I'm posting via wifi lol
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Already tried it and a million things.
Looks like we all could use an expert here. IS THERE A SPRINT S3 TO VERIZON PREPAID DOCTOR IN THE HOUSE?!?!?! HALPPP
Sent from my SPH-L710 using xda app-developers app
Oh btw on the Sprint s3 when putting it into diag mode I used the pda instead of modem, which is different from what I been doing and from what I understand to be the correct way but it worked for me (this time). And of course under usb settings pick the bottom one.
Sent from my SPH-L710 using xda app-developers app
bountyboy8
PM me if you're still having the problem with D F S I may be able to help. [email protected]
you guys aren't gonna believe this but this worked for me. i am rarely able to get dfs and my sprint s3 to read on my laptop (i've had luck lately on my desktop...randomly), but i plugged in a usb hub/splittler thing then connected my s3 to that and now its reading and able to write in diag mode LOL.
annndddd its not able to read the port again. this just doesn't happen with DFS it happens with cmda ws and other programs. its a windows thing.
does anyone have a working consistent solution for this?
zen_phones said:
annndddd its not able to read the port again. this just doesn't happen with DFS it happens with cmda ws and other programs. its a windows thing.
does anyone have a working consistent solution for this?
Click to expand...
Click to collapse
are you using com port 2 or 3?
try that if you are not.
then open dfs/manage/hit reset system ports.
close dfs but release ports than reopen from app tray and
see if it recognize.
MajorCinema said:
are you using com port 2 or 3?
try that if you are not.
then open dfs/manage/hit reset system ports.
close dfs but release ports than reopen from app tray and
see if it recognize.
Click to expand...
Click to collapse
its usually like com 6 or higher. i guess i'll try those. hey are u referring to an older version of dfs as far as resetting port? i remember seeing that on 3.1 or so. i'll go test that out
Hey buddy, I was working on flashing my brand new never-activated S3 and became across the same issue with DFS not recognizing my S3. Here is my 100% working solution!!!
Step By Step. Sprint GS3 Instructions.
1. Put your S3 out of DIAG MODE,
---DIAL##3424#
-Select PDA, MTP + ADB. Then press back button all the way to homescreen.
2. Reboot phone.
3. Once your phone is back, put your S3 in DIAG MODE again.
----DIAL ##3424#
Select CDMA MODEM, DM+MODEM+ADB. Then press back button all the way to homescreen.
Plug it in, give it a second. And tada, DFS detects your S3 as an online device. I'm guessing Samsung limited the number of times you can plug in your phone and read/write programming settings, to 1 per boot. By the way, I'm working on flashing it to Virgin Mobile USA.
Oh man! I'm gonna run home and try this! Thanks for the response either way!
Hay would u know how to flash the MiFi 2200 to verizon prepaid by any cance?
Alexander243 said:
Hey buddy, I was working on flashing my brand new never-activated S3 and became across the same issue with DFS not recognizing my S3. Here is my 100% working solution!!!
Step By Step. Sprint GS3 Instructions.
1. Put your S3 out of DIAG MODE,
---DIAL##3424#
-Select PDA, MTP + ADB. Then press back button all the way to homescreen.
2. Reboot phone.
3. Once your phone is back, put your S3 in DIAG MODE again.
----DIAL ##3424#
Select CDMA MODEM, DM+MODEM+ADB. Then press back button all the way to homescreen.
Plug it in, give it a second. And tada, DFS detects your S3 as an online device. I'm guessing Samsung limited the number of times you can plug in your phone and read/write programming settings, to 1 per boot. By the way, I'm working on flashing it to Virgin Mobile USA.
Click to expand...
Click to collapse
just got home and tried it...
holy crap it worked! on my desktop comp, but not on my laptop (i think its my laptop).
hey thanks for this. i hope it will work again when/if it starts to not detect it again. but for now im happy as a clam to be able to access it lol. thanks again
Sent from my SPH-L710 using xda app-developers app
tested again after failing to getting it into devices online, and did what you said and it worked!! looks like you are right about samsung diag allowance per boot. thank you!!!!
Alexander243 said:
Hey buddy, I was working on flashing my brand new never-activated S3 and became across the same issue with DFS not recognizing my S3. Here is my 100% working solution!!!
Step By Step. Sprint GS3 Instructions.
1. Put your S3 out of DIAG MODE,
---DIAL##3424#
-Select PDA, MTP + ADB. Then press back button all the way to homescreen.
2. Reboot phone.
3. Once your phone is back, put your S3 in DIAG MODE again.
----DIAL ##3424#
Select CDMA MODEM, DM+MODEM+ADB. Then press back button all the way to homescreen.
Plug it in, give it a second. And tada, DFS detects your S3 as an online device. I'm guessing Samsung limited the number of times you can plug in your phone and read/write programming settings, to 1 per boot. By the way, I'm working on flashing it to Virgin Mobile USA.
Click to expand...
Click to collapse
zen_phones said:
tested again after failing to getting it into devices online, and did what you said and it worked!! looks like you are right about samsung diag allowance per boot. thank you!!!!
Click to expand...
Click to collapse
I'm glad it worked, and sorry I don't know how to flash the MiFi device.
Whenever you can't get your S3 to work, just repeat the steps.
zen_phones said:
Oh btw on the Sprint s3 when putting it into diag mode I used the pda instead of modem, which is different from what I been doing and from what I understand to be the correct way but it worked for me (this time). And of course under usb settings pick the bottom one.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Remarkably enough, this worked. I can't stop wondering why on this phone setting Phone Utils to MODEM does not work and PDA works...
Thanks again.
None of you guys are going to like this answer...but it's the truth.
This phone is crap. Period.
You want to know the ONLY real trick to get it to read in CDMA WS, DFS, QPST, etc?
Factory reset. A lot. Then try different cables. Factory reset again. Then a different USB port. Then factory reset AGAIN. And if it still don't work.
You guessed it. Factory reset AGAIN.
Reboot your computer. Factory reset.
The reason is this...the highest percentage of the time, if the phone restarts & is recognized as the same COM port, it will usually not allow any software to connect to it.
I've flashed hundreds of phones...way more than I care to think about, and the SGS3 (Verizon and Sprint) is the absolute most troublesome. It will make you second guess everything, over and over and over again. The Verizon SGS3 holds a special place in my heart as the phone I absolutely hate the most. It used to be the HTC Thunderbolt because you have to reboot after you do damn near anything with diag mode, etc...or LG when you make changes in EPST for mms/data/etc on the handset itself constantly rebooting but NOooooooooooooooo the Verizon SGS3 makes me want to kill it...and the Sprint one is close behind...
They're just quirky. If you can't connect your Sprint one, factory reset it, switch it back to Diag mode & plug it in....you'll almost always connect the first time, unlike the Verizon version which almost always takes multiple resets before it decides to do something. The only thing the posts in this thread that have worked have in common, is that they cause the device to be recognized on a different com port (or as a different device) each time it's restarted.
But, once you make it to the programming phase, WATCH OUT! This thing is FAST and reliable. For added fun, when I do the Sprint ones, I'll also install the SlimRom and OMG...talk/text/data wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeee & SlimRom is lightweight & MMS will work without 3rd party apps. FUN!
If this helped, or was the least bit entertaining, please click "THANKS"!
androidjunkie71 said:
None of you guys are going to like this answer...but it's the truth.
This phone is crap. Period.
You want to know the ONLY real trick to get it to read in CDMA WS, DFS, QPST, etc?
Factory reset. A lot. Then try different cables. Factory reset again. Then a different USB port. Then factory reset AGAIN. And if it still don't work.
You guessed it. Factory reset AGAIN.
Reboot your computer. Factory reset.
The reason is this...the highest percentage of the time, if the phone restarts & is recognized as the same COM port, it will usually not allow any software to connect to it.
I've flashed hundreds of phones...way more than I care to think about, and the SGS3 (Verizon and Sprint) is the absolute most troublesome. It will make you second guess everything, over and over and over again. The Verizon SGS3 holds a special place in my heart as the phone I absolutely hate the most. It used to be the HTC Thunderbolt because you have to reboot after you do damn near anything with diag mode, etc...or LG when you make changes in EPST for mms/data/etc on the handset itself constantly rebooting but NOooooooooooooooo the Verizon SGS3 makes me want to kill it...and the Sprint one is close behind...
They're just quirky. If you can't connect your Sprint one, factory reset it, switch it back to Diag mode & plug it in....you'll almost always connect the first time, unlike the Verizon version which almost always takes multiple resets before it decides to do something. The only thing the posts in this thread that have worked have in common, is that they cause the device to be recognized on a different com port (or as a different device) each time it's restarted.
But, once you make it to the programming phase, WATCH OUT! This thing is FAST and reliable. For added fun, when I do the Sprint ones, I'll also install the SlimRom and OMG...talk/text/data wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeee & SlimRom is lightweight & MMS will work without 3rd party apps. FUN!
If this helped, or was the least bit entertaining, please click "THANKS"!
Click to expand...
Click to collapse
I understand your feelings bro. Actually I felt this way before until I finally figured it out, after a lot of hair pulling and gnashing of teeth. When you enter DIAG mode MAKE SURE PDA IS SELECTED, NOT MODEM. Then tap Qualcomm settings and select the option with RMNET. Voila, phone will be seen by ANY programming tool (CDMA Workshop, QPST, DFS). Hope this saves someone from a lot of hair pulling and gnashing of teeth.
Related
Bought an Epic 4G Touch and found a local guy on craigslist who's going to do a full flash to MetroPCS. I'm wondering if anybody has any suggestions as to what questions I should ask the guy. I'm new to this whole thing, this is my first smart phone, but I'm a quick learner.
From what I understand from my research, he's going to have to flash a custom rom on it in order for the phone's features to be fully operational. Is it important I find out which rom so I can perform my own updates, or is it going to be obvious what he did simply by looking in the settings?
Am I going to have to avoid OTA updates? Or do I just install Rootkeeper to get the updates?
I also assume that by doing this I will be stuck using the custom rom, right? Or as long as my ESN is added to the Metro system I can change it to any rom I can find that is fully operational with Metro?
Is there any other vital information I should make sure to ask for in case I need to configure anything in the future?
Would it be smarter for me to just ask him to add my ESN to metro and then flash it myself? (If I can find a guide online-- links, anybody?)
Feel free to add any information that you think might help!
Thanks in advance.
its pretty much about manually programming in your data settings 100% correctly. anyone can add an meid/esn into their database and program in your phone number(##SPC#). if you research online you can find the exact settings. i dont believe metro uses wap anymore so that certainly makes things easier.
you should be able to use ANY rom and be able to call/text/use data. the only issue you will run into(maybe.. i dont use metro) would be mms. mms sometimes is custom built for a specific phone/carrier. when you see metro/cricket custom roms.. thats generally the big modification.. the mms. you may get some little edits here and there.. changing the word sprint to metro etc... but otherwise thats pretty much it. as is.. the epic 4g touch can be manually programmed with any cdma carriers data profiles for 3g.
if you dont care about mms.. its a 100% no brainer.. take the time and do it yourself. if mms is a must.. do a little research to see if others on metro got mms working.. there will be people talking about it somewhere on the internet.
and just to add.. if u do use a custom rom for metro.. you will be stuck with that rom(unless its a freely available custom rom.. but those are rare these days.. most are sold on cdma forums for lots of $$$).
I will preface this with I've never done this before so I don't know the outcome. That said, at least in my area, the 4g is not compatible with lte, metro doesn't have 3g but 2g rttx1 should work. I don't know about you but if it were me, I wouldn't do it. That's like putting a restricting device on a Porsche so that its top speed is 30mph. 2g is practically dial up speeds. Do what you will though...
autoprime said:
its pretty much about manually programming in your data settings 100% correctly. anyone can add an meid/esn into their database and program in your phone number(##SPC#). if you research online you can find the exact settings. i dont believe metro uses wap anymore so that certainly makes things easier.
Click to expand...
Click to collapse
Thanks so much, great information. Question- Do you mean I can add my own ESN into the Metro Database myself? I thought only Metro reps could do that (independent ones for under the table).
As for the rest of the data settings, when searching for this information online, do I need to look specifically for Epic 4g Touch, or the data settings will be the same no matter what phone?
autoprime said:
if you dont care about mms.. its a 100% no brainer.. take the time and do it yourself. if mms is a must.. do a little research to see if others on metro got mms working.. there will be people talking about it somewhere on the internet.
Click to expand...
Click to collapse
Actually I don't care about mms, as long as I can do regular text messages (sms). Does this mean that if I don't care for MMS I can actually get the Epic Touch fully operational on the stock rom?
autoprime said:
and just to add.. if u do use a custom rom for metro.. you will be stuck with that rom(unless its a freely available custom rom.. but those are rare these days.. most are sold on cdma forums for lots of $$$).
Click to expand...
Click to collapse
So I couldn't re-flash it to a different rom? It's not "reversible"? (If it is possible- would I lose all the Metro data if I changed the rom?)
Thanks for the help, I've been Googling around like crazy trying to find more info, but not finding a lot. I probably should of gotten a more commonly metro flashed phone, lol. I'll keep looking around and see if I can find any guides, if I find one and can do everything myself I'd rather go that route (not to save money, just to be able to troubleshoot any issues that may arise in the future).
Edit: I've found this thread http://forum.xda-developers.com/showpost.php?p=8395950 that looks like it might be exactly what I need to do (up to step 28), and someone on this Epic Touch Forum recommended another member to this thread http://forum.xda-developers.com/showthread.php?t=1303507 but it's for Evo 3D, so not sure if it would work for the Epic. The guide starts off for phones already "flashed to metro with text and talk", though. I think I still need to pay the "Pro" to get my ESN added to the Metro Network? Are they able to add the ESN to the Metro Database and get text/talk working without flashing a custom rom?
Sorry... so many questions. I'll give lots of thanks =(
EDIT #2:
Think I got it now. Looks like I will need to get the phone Metro Flashed through my guy for talk and text (I can ask if his MMS/Web method involves a custom rom, if so I'll pass) then I can activate web (and MMS I guess) myself through these steps: http://forum.xda-developers.com/showthread.php?t=1303507
At this point (correct me if I'm wrong) I won't be locked into any custom roms and I can freely upgrade to any freely available rom (ie CM7) without affecting my Metro settings?
really not sure what the best procedure is for getting your esn added to the DB.. i would think any 3rd party metro store would be able to add it into system... as well as some people on craigslist. just look for the cheapest option.
once your esn ins in the system.. you pick a plan.. program in your phone number and msid (##SPC#) as well as write a metro PRL to the phone... and thats it for working talk/text. thats the "basic flash" most people do. only thing you cant do yourself is add meid.
and then you will eventually program data. the steps for evo 3d should be very similar to epic. other than how to get the phones into DIAG mode.. what to manually add is the same across the board... tho your username/password will be unique to you. (ppp password is based off esn.. username will be based on phonenumber).
i believe metro has recently added 3G in SOME areas.. so theres a small chance youll have that. and as for 4G... see my epic 4g touch thread on how to edit wimax settings...
ive said enough.. you should be able to take it from here.
edit: as for being "stuck" with a custom metro rom.. youd have the option to reflash anything youd like.. but the custom metro settings would probably no longer work. it would suck to pay for a custom rom that you end up wanted to switch out anyway(since it wouldnt be updated like he rest of the roms). i say pay the $10.. 15..20.. whatever it is to have esn added to the system.. then do the rest yourself.
If you search on ebay. There is a guy that can add your esn to metro for $25. Then you can flash your own custom rom, but you would have to setup your own data. If you search around, there are threads about how to setup data for metropcs around the web.
Ran outta thanks, I'll get you tomorrow
I looked it up on ebay and there's only a couple up atm and they end up being a lot, ie the cheapest is $20 but then they charge $25 shipping lol <.<
Luckily, the local guy I found on Craigslist (there are actually a lot independent metro stores in the area advertising actually) will add ESN and get talk & text working for $35. So it's not a bad deal. From there I'll get the rest working myself.
Although I'm gonna ask him about his MMS method, if it involves a custom rom I have been contemplating getting it. I been researching and it looks like all I have to do is backup the custom rom with nandroid, and I can flash to whatever rom I want, then I can always revert to the custom rom if I really want MMS working again-- if I'm unable to get it working myself.
My used Epic 4G Touch arrives in a few hours!
First thing I plan on doing is a full restore and then installing EL13+CWM. After this I'll get take it to the independent Metro store to get it flashed over to Metro. Then I'll make my first nandroid backup.
Question- By making the nandroid backup I can always revert back to the Metro data settings my guy configured, right? (In the case they get deleted through rom flashing).
Can I see all the settings he configured by reading the values set through CDMA Workshop? Would this include everything needed to make the phone fully functional on Metro again (outside of the possible custom rom to make MMS work)?
Thanks in advance.
Godswrath said:
My used Epic 4G Touch arrives in a few hours!
First thing I plan on doing is a full restore and then installing EL13+CWM. After this I'll get take it to the independent Metro store to get it flashed over to Metro. Then I'll make my first nandroid backup.
Question- By making the nandroid backup I can always revert back to the Metro data settings my guy configured, right? (In the case they get deleted through rom flashing).
Can I see all the settings he configured by reading the values set through CDMA Workshop? Would this include everything needed to make the phone fully functional on Metro again (outside of the possible custom rom to make MMS work)?
Thanks in advance.
Click to expand...
Click to collapse
nandroid wont restore data settings... but you wont need to as 3g data profiles(as well as talk/text) stick after new roms. only a ##786# full reset will wipe those settings.
you should be able to see most if not all settings with cdma ws/qpst service programming.
1. Phone number/msid has to be programmed.
2. Metro PRL Flashed
3. after step two you now have talk/text.
4. Program in 3G Profile 0/1.
5. Program PPP data profile.
6. Done. Only thing I skipped is MMS.. which will most likely be covered by a custom metro rom.. tho maybe you could take the mms ap out of the custom rom to use... but im just guessing at this point.
autoprime said:
really not sure what the best procedure is for getting your esn added to the DB.. i would think any 3rd party metro store would be able to add it into system... as well as some people on craigslist. just look for the cheapest option.
once your esn ins in the system.. you pick a plan.. program in your phone number and msid (##SPC#) as well as write a metro PRL to the phone... and thats it for working talk/text. thats the "basic flash" most people do. only thing you cant do yourself is add meid.
and then you will eventually program data. the steps for evo 3d should be very similar to epic. other than how to get the phones into DIAG mode.. what to manually add is the same across the board... tho your username/password will be unique to you. (ppp password is based off esn.. username will be based on phonenumber).
i believe metro has recently added 3G in SOME areas.. so theres a small chance youll have that. and as for 4G... see my epic 4g touch thread on how to edit wimax settings...
ive said enough.. you should be able to take it from here.
edit: as for being "stuck" with a custom metro rom.. youd have the option to reflash anything youd like.. but the custom metro settings would probably no longer work. it would suck to pay for a custom rom that you end up wanted to switch out anyway(since it wouldnt be updated like he rest of the roms). i say pay the $10.. 15..20.. whatever it is to have esn added to the system.. then do the rest yourself.
Click to expand...
Click to collapse
You can change your meid. ##YOURMSL#
Sent from my SPH-D710 using xda premium
locoboi187 said:
You can change your meid. ##YOURMSL#
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
yes it is possible to change an meid... but i'm not sure why ##MSL# is mentioned... the two are not related.
Hmmm... I'm stuck on this step :
USB Storage Mode is OFF - [Drag down the notification bar and tap on "USB Connected" - should be off by default]
When I click on USB Connected it just sends me back to Home. Any ideas?
(Step 1 from http://forum.xda-developers.com/showthread.php?t=1342728)
EDIT: figured it out, had to re-install drivers and change the default location to 32-bit
Nope, still no go... Hmm Maybe I'll uninstall drivers and reinstall them. Problem is my PC isn't recognizing phone as a drive, just a device.
Yeah I dunno, gonna give up installing EL13+CWM for now and go get it flashed.
I think the problem is, when I connect the device I get "Samsung Mobile MTP Device Failed"
I downloaded the Samsung USB/Android drivers [USB/Android] and have Kies installed (Kies can't even recognize it though).
autoprime said:
yes it is possible to change an meid... but i'm not sure why ##MSL# is mentioned... the two are not related.
Click to expand...
Click to collapse
Your MSL code entered at the dialer with the "#" brings up a menu in which you can edit. I used this with a sprint tech when trying to fix my gps
Sent from my SPH-D710 using xda premium
Godswrath said:
Hmmm... I'm stuck on this step :
USB Storage Mode is OFF - [Drag down the notification bar and tap on "USB Connected" - should be off by default]
When I click on USB Connected it just sends me back to Home. Any ideas?
(Step 1 from http://forum.xda-developers.com/showthread.php?t=1342728)
EDIT: figured it out, had to re-install drivers and change the default location to 32-bit
Nope, still no go... Hmm Maybe I'll uninstall drivers and reinstall them. Problem is my PC isn't recognizing phone as a drive, just a device.
Yeah I dunno, gonna give up installing EL13+CWM for now and go get it flashed.
I think the problem is, when I connect the device I get "Samsung Mobile MTP Device Failed"
I downloaded the Samsung USB/Android drivers [USB/Android] and have Kies installed (Kies can't even recognize it though).
Click to expand...
Click to collapse
Maybe you need USB debugging enabled by going to Settings > Applications > Development
Sent from my SPH-D710 using xda premium
Thanks, but no go. Have debugging checked. (I followed the tutorials to the letter)
youre trying to root?
I successfully rooted with the full restore, what I tried to do next was install EL13+CWM and I noticed 2 things:
1st) I can't get past this step: USB Storage Mode is OFF - [Drag down the notification bar and tap on "USB Connected" - should be off by default - pic] (ie when I tap on "USB Connected" it just takes me back to the home screen.
2nd) I continued with the tutorial since it says it should be set correctly as default, but then when the E4GT automated rooting package (not to root, but to install EL13+CWM) it hangs saying "Waiting for device to be connected"
When looking for an answer I discovered this:Why is the install stuck waiting for device to be connected? which gave me some ideas to try, although I've tried all of them to no avail.
I should note that when I go to start->run->devmgmt.msc this:
Code:
Android Phone
SAMSUNG Android ADB Interface
Modem
SAMSUNG Mobile USB Modem
isn't listed there, like it says it should here.
I think I'm going to try to reinstall all the drivers again... Should I do this before or after connected the phone? (The first time I installed the USB/Android drivers from the tutorial before connecting my phone, but I notice after connecting the phone windows goes through the automated process of installing drivers)
<face palm>
http://androidadvices.com/enable-usb-storage-android-devices/
It was so simple, lol... To my own defense this wasn't anywhere in the tutorials
Thanks again for the help guys
EDIT: Well, looks like my problem is still here, the E4GT automated rooting package still hangs searching for device to be connected.
EDIT #2: Omg... Finally figured it out. I thought debugging was enabled (it shows a freakin' check mark) but it has to be a green check mark apparently...
Weee installed CWM, now to create a nandroid and start flashing! Think I'm going for Calkulin's rom with the ICS Theme
Another question!
Hey guys, question:
I got 2 E4GT's flashed over to MetroPCS, both are working fine, but one of them gives me this error on bootup:
Code:
Error 67: Registration failure. Your Sprint data service username
and/or password may be incorrect. Please try again.
Any ideas? Aside from the nuisance, it hasn't seemed to cause any hindrance to the features. The other phone has never given this error, though. Both are running on Calk's rom. Thx guys.
Godswrath said:
Hey guys, question:
I got 2 E4GT's flashed over to MetroPCS, both are working fine, but one of them gives me this error on bootup:
Code:
Error 67: Registration failure. Your Sprint data service username
and/or password may be incorrect. Please try again.
Any ideas? Aside from the nuisance, it hasn't seemed to cause any hindrance to the features. The other phone has never given this error, though. Both are running on Calk's rom. Thx guys.
Click to expand...
Click to collapse
if its only at bootup i wouldnt worry too much. its just the firmware trying to get a sprint connection and it failing.. since youre connected to metro. i would check ##data# > view > data profile/username.. compare whats listed for the one thats working to the one thats giving the error. are they both the same? if not, make them the same and perhaps you can avoid the error. if they are the same... its probably some little data setting somewhere that the phone doesnt like and likely not worth the hassle of poking at it more. like i first said.. the error at boot really isnt a huge deal. if it was a constant error that kept popping up then its something to look at.
i really did search google and i search this forum.
i searched for modelname pda mode, modelnumber pda
pda mode
modelname *#, and a dozen other search box queried, i just cant find that one thread that has the *# sequence to choose pda mode... plz help?
*#7284# and *#9090# are the commands you seek. Could you tell me what you're trying to do? :what:
Sent from my SGH-I927 using xda premium
Nardholio said:
*#7284# and *#9090# are the commands you seek. Could you tell me what you're trying to do? :what:
Sent from my SGH-I927 using xda premium
Click to expand...
Click to collapse
Thank you!
The thread I was searching for, but can't find, said to enter the code and choose the other option, then go back to pda mode immediately, as part of troubleshooting.
I am having a WHALE of a time getting ANYTHING at all flashed on my glide.
even the official kies update wont go thru, cant get odin to flash anything.
everything i have tried, the best i have goten is on the odin screen on phone, the blue progress bar goes about 1/8th inch and never moves past that.
i have tried this on several different computers, win 7 x64 and win xp pro.
same thing on all of them.
(I just tried it on a fresh vista (uggh) system, and vista won't do anything but call the phone an unknown device)
here;'s the thread i have going in the dev board:
http://forum.xda-developers.com/showthread.php?t=1877350
I am right now trying the leaked one click program on yet a different computer.
it gets to bootloader.bin and does not move any more
Perhaps the most frustrating thing about this whole ordeal is; when i first got the phone and found that there was going to be an official ICS upgrade, i decided to not mod the phone at all - no root or anything, so i wouldn't have a problem doing the official upgrade.
so my very first attempt to do anything at all to the software on this phone was to use the official instructions from the URL in the txt msg.
arrrggh.
(sorry for this pointless post, but i am SO frustrated and sad over this)
[bold]UPDATE[/bold]
ok, so here's what finally worked:
using a different USB cable that i found laying around.
for all of samsung's rhetoric about "only use the oem data cable" "never use anything but the oem data cable" "blah blah oem usb cable blah blah"
after trying this on like 6 different computers all with same results, i just found a usb cable laying around at work and decided to try it, just for the heck of it - IT DIDNT TAKE 5 MINUTES TO FLASH!
are you kidding me? no eric, i am not.
I AM NOW ICE CREAM SANDWICH!
seriously, FOUR days of banging my head on the wall, and it was the freaking OEM data cable that was the problem.
:silly::silly::silly::silly:
Yea never use OEM cables for some reason they don't work great.. blackberry cables work great
Sent from my SGH-I927 using xda app-developers app
From time to time I cannot connect to mobile data, even though 3G shows above the signal triangle. A few solutions that randomly work are to toggle the radio from LTE/CDMA to CDMA only (and then back to LTE), toggle in and out of airplane mode, and the last resort of rebooting. The only method that works consistently is rebooting. Happened again today, and I noticed a few oddities on the phone status page in settings:
- Both IMEI and MEID were shown as "unknown"
- Phone number was visible
- Mobile status shows "connected"
- IP addresses (both IPV4/IPV6) were assigned
Prior to this (for the past 108 or so hours of uptime) all was fine, but in the midst of playing Words with Friends the signal bars grayed out and would not resume the connection. After several trials of my "solutions", I had to reboot. Sure enough, after reboot all was well again, and the IMEI and MEID were again displayed correctly in the phone status page.
As my signature shows, I am stock unrooted. While I have seen that a few individuals somehow wiped out their efs partition during a flash, that doesn't seem to be the case here since all of my info came back upon reboot.
Thoughts?
Sent from my Xoom using xda premium
Since you're completely stock, try exchanging for a referb with Verizon?
Will the next nexus have a longer screen?
I found that reseating the SIM card fixed my triangle (Roaming) issue. May be worth a shot.
I had this same issue. Sudden loss of service. IMEI: unknwon, Phone Number: unknown, etc...
I brought it to VZW to try a new sim. No go. They told be to call Samsung.
They verified that I actually had tried the idiot proof stuff, and confirmed its dead. Still under 1 year manufacturer's warranty. They're paying to mail it back and say they'll repair it, and send it back to me. Here's hoping they don't care that I've been flashing it like crazy for the past 5 months.
myriad46 said:
I had this same issue. Sudden loss of service. IMEI: unknwon, Phone Number: unknown, etc...
I brought it to VZW to try a new sim. No go. They told be to call Samsung.
They verified that I actually had tried the idiot proof stuff, and confirmed its dead. Still under 1 year manufacturer's warranty. They're paying to mail it back and say they'll repair it, and send it back to me. Here's hoping they don't care that I've been flashing it like crazy for the past 5 months.
Click to expand...
Click to collapse
Hard to say our problems are related. I am stock unrooted, and as stated in the OP only my IMEI and MEID were unknown. Also came back on reboot. Chances are you killed your efs partition during one of your flashing sessions.
Sent from my Xoom using xda premium
In the future, if anyones IMEI/MEID is perm-disabled due to whatever reason... my thread found here(Post #2) has info on repairing the Gnex MEID/ESN/IMEI.
This has happened to me recently. I've been flashing *safely* since the G1. Since Jelly Bean flasshing removed my network access. I went through a warranty repair and upon unlocking same problem. If my MEID or ESN is corrupt, I have not figured out how to repair it using Prime's instructions. That's a new world to me.
autoprime said:
In the future, if anyones IMEI/MEID is perm-disabled due to whatever reason... my thread found here(Post #2) has info on repairing the Gnex MEID/ESN/IMEI.
Click to expand...
Click to collapse
Autoprime, I did find that thread in my frenzied search to fix my phone. I downloaded the tool in post #2 but was confused how to get my phone connected as a COM port, or converserly, it would not recognize it when I changed the setting to USB. Do I need to put my phone in a particular mode, before that utility will recognize it? Do I have to go through the setup in Post #1 (ETS) prior to using the IMIE writing utility? Thanks.
myriad46 said:
Autoprime, I did find that thread in my frenzied search to fix my phone. I downloaded the tool in post #2 but was confused how to get my phone connected as a COM port, or converserly, it would not recognize it when I changed the setting to USB. Do I need to put my phone in a particular mode, before that utility will recognize it? Do I have to go through the setup in Post #1 (ETS) prior to using the IMIE writing utility? Thanks.
Click to expand...
Click to collapse
as u said in last sentence... you will have to go thru post 1 steps(only some of them!) to connect to meid tool.
since you guys are on a verizon gnex.. you would need to flash a Sprint rom in order to set the phone into diag mode. i believe most vzw roms have these options left out.. at least stock did.
2 things are required for a successful Ets Diag connection...
1. setting diag mode... this is the *#*#DIAG#*#* menu
2. setting Ets Channel mode to "USB" . This is done in the *#*#DATA#*#* > More > Ets Channel settings.
It MAY be possible to stick with the Verizon rom and use the Sprint Diagnostics App: http://forum.xda-developers.com/showthread.php?t=1774503
not sure if it works with VZW roms tho(im a sprint user).
The VIA Ets tool is the equivalent to messing with QPST/QXDM on Qualcomm phones. Just like Qualcomm phones have to be put into diag mode first before connecting to QPST, the Galaxy Nexus has to be set in the right mode as well.
autoprime said:
as u said in last sentence... you will have to go thru post 1 steps(only some of them!) to connect to meid tool.
since you guys are on a verizon gnex.. you would need to flash a Sprint rom in order to set the phone into diag mode. i believe most vzw roms have these options left out.. at least stock did.
2 things are required for a successful Ets Diag connection...
1. setting diag mode... this is the *#*#DIAG#*#* menu
2. setting Ets Channel mode to "USB" . This is done in the *#*#DATA#*#* > More > Ets Channel settings.
It MAY be possible to stick with the Verizon rom and use the Sprint Diagnostics App: http://forum.xda-developers.com/showthread.php?t=1774503
not sure if it works with VZW roms tho(im a sprint user).
The VIA Ets tool is the equivalent to messing with QPST/QXDM on Qualcomm phones. Just like Qualcomm phones have to be put into diag mode first before connecting to QPST, the Galaxy Nexus has to be set in the right mode as well.
Click to expand...
Click to collapse
Thanks very much for laying that out. Is this something that "just happens"? It seems like (over several months) I flashed 50 - 60 times, radio a few times, changed from CWM to TWRP with no problems and then in the middle of the day, I just lose signal.
Could it be a hardware issue? I read somewhere that a modem in a phone got fried and caused the same thing.
myriad46 said:
Thanks very much for laying that out. Is this something that "just happens"? It seems like (over several months) I flashed 50 - 60 times, radio a few times, changed from CWM to TWRP with no problems and then in the middle of the day, I just lose signal.
Could it be a hardware issue? I read somewhere that a modem in a phone got fried and caused the same thing.
Click to expand...
Click to collapse
i mean.. in my experience it comes with messing with the phone.. the EFS etc. could be from a bad flash.. but yes it could be hardware... or theres even a small chance its just random. youd have to look at the factors leading up to the issue for the best guess.
overall tho.. outside of messing with the efs/NV.. its kinda weird for it just just to happen.. id consider that very rare.
UPDATE: sent back to Samsung. They replace the main board under warranty. Works like a charm now.
Sent from my Galaxy Nexus using Tapatalk 2
Missing MEID/IMEI no service but internet is working.
I've been searching high and low and have came across various forums that are related to my problem but I'm still not sure if its the problem I have
or what to do exactly. I have a Samsung Galaxy Nexus with VZW, rooted, running a custom ROM (CM10), Android version 4.1.2 JZO54K. My
service got disconnected and when I paid to get it reconnected I get an empty signal triangle and sometimes an R above it (roaming). My internet
works oddly enough but I'm unable to receive/make calls or text messages. My status reflects; Network: searching for service; Service state: out of
service; Mobile network state: disconnected; MEID: unknown; IMEI: unknown. Before my phone was disconnected it was working fine, please
help!!!
If you did some backups time to time and if you have backup of data folder, inside of data folder you should have folder radio. Inside the radio folder should have data.bin file and data.md5. In my case they was original data files of my phone and after their copy to factory folder ot restore my IMEI.
I hope that helps.
Sent from my Galaxy Nexus using xda app-developers app
Yeah unfortunately I never did... any other suggestions??? Or am I at a lost???
Sent from my Galaxy Nexus using xda app-developers app
Can this international note 2 work on U.S. T-mobile? Comes with chinese jellybean software idk if it's even real or not......
http://pdadb.net/index.php?m=specs&id=4001&c=samsung_gt-n7102_galaxy_note_ii
Yes it will work. N7102 is dual sim card
Edit
JoJo2211 said:
will this Galaxy Note II n7102,WCDMA/GSM, work in the USA? I want to use AT&T and T-Mobile. Thanks
Click to expand...
Click to collapse
tee1 said:
Short answer no right now.
Click to expand...
Click to collapse
Thanks for the info! It's just weird that it comes with chinese software. Any idea if i'd get 4g? (HSPA+)
I think the default language for the N7102 is Chinese.
As for 4G, im not sure. It should though since its Quad Band
Edit, checked the N7102 thread and saw this
http://forum.xda-developers.com/showpost.php?p=37317017&postcount=554
Oh so it won't work? Wow great thing I didn't decide to get it.
Not sure what country you are in but HSDPA+ isnt 4G ... those guys with N7102 outside china appear to have continued issues & I dont think a they will ever get what they hoped.
I completely dropped my plan to get one after reading the threads.
My need is for one sim for calls & texts & Another for Data only (im in UK) so I got a N7105 & for the data sim a Huawei E586 HSDPA+ Mifi router which also has sms send capability.
The 7102 in my opinion has too many down sides just to get 2 live call lines.
No warranty ... already people are reporting faulty units.
Samsung gt-n7102 reboot loop
Hi guys,
I'm new here so I hope am at the right place. Anyway I tried rooting my gt-7102 and now it on continuous restart loop. I tried going to recovery mode by pressing the power + home and the volume up button but it just keeps on restarting showing a white blank screen which lasts for about ten seconds or so. I tried using Smart phone flash tool but it keeps on saying searching. Tried to work with mtk droid tools but it says device not connected. I can't connect to the device in any way as keeps restarting since it is continuously connected and disconnected from my pc after every ten seconds or so. pliz someone help.
Thanks
kibaya said:
Hi guys,
I'm new here so I hope am at the right place. Anyway I tried rooting my gt-7102 and now it on continuous restart loop. I tried going to recovery mode by pressing the power + home and the volume up button but it just keeps on restarting showing a white blank screen which lasts for about ten seconds or so. I tried using Smart phone flash tool but it keeps on saying searching. Tried to work with mtk droid tools but it says device not connected. I can't connect to the device in any way as keeps restarting since it is continuously connected and disconnected from my pc after every ten seconds or so. pliz someone help.
Thanks
Click to expand...
Click to collapse
This phone is an MTK or MediaTek phone, it has a different way of rooting it, Google FramaRoot and try with that. im not even sure how you were able to try to root it since i cant get into download mode in my phone but anyway, to unbrick the phone i guess you can try a jig or if not Google unbrick MTK and do some research. Good luck!
So I'm working on unlocking my Samsung Galaxy S3,and I had it working just fine, got the MSL code and was able to get into the menus.
Now it seems that no matter what computer I use, the phone won't respond. I've checked com ports, made sure connection settings were right, but no luck, even with a clean install of CDMA workshop on a new computer.
Anything come to mind that I should double check or do to try and resolve this?
I'm going from sprint to page plus.
I managed to figure it out after a little fiddling. The baud rate for the com port has to be set to one of the ones that CDMA workshop recognizes in the device manager details for that port. I'll post the steps later.