hardware id missing - Samsung Captivate Glide

Anybody else have hardware id missing error when they connect with usb to pc?
Stock
UCKL1
Sent from my SAMSUNG-SGH-I927 using Tapatalk 2

Anybody? This phone sux
Sent from my SAMSUNG-SGH-I927 using Tapatalk 2

i found it was a driver issue.. the new drivers that install with kies..
Here is the verison that worked for me: SAMSUNG_USB_Driver_for_Mobile_Phones_1.4.8.0

It's the fault of outdated Windows Update drivers for our phones.
Correct way of installing drivers if above error is present:
1. Disconnect phone from PC.
2. Uninstall Kies and drivers.
3. Download fresh copy of Kies from Samsung website.
4. Turn off Internet connection on PC <- important! This will force OS to look for drivers on PC first instead of Windows Update.
5. Install Kies, run it.
6. Connect phone to PC and wait for drivers installation.
7. Turn on Internet connection.
8. Done.
Sent from my SAMSUNG-SGH-I927R using xda app-developers app

Nope. v1590 of the drivers don't work for me
Sent from my SAMSUNG-SGH-I927 using Tapatalk 2

Related

Computer Wont Accept Driver Needed for S3

i got xp pro.. and my computer wont accept the driver needed to recognize my S3. i downloaded the driver, 'Windows Driver Foundation - User-mode Driver Framework' which is used to connect between computer and devices via USB. the problem is that the service of that driver wont start.. everytime i attept to snable the service, it gives this error:
'error 31: a device attached to the system is not functioning'
what must i do to enable this service?
..
I know...silly question ....did you try restarting your computer?
Sent from my SGH-T999 using xda premium
awrnsmn said:
I know...silly question ....did you try restarting your computer?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
yeah of course.. and that still doenst work. any help would be welcome.

Having problems with connecting phone to computer

Whenever I connect my phone to the computer to put music on it i get a error message saying "Hardware Id Missing Windows cannot identify the device plugged into the SAMSUNG Mobile USB Composite Device." Is there any way to fix this?
I believe, if you are on Windows, you can search for and download the Samsung drivers for your phone. You will have to choose 32 or 64 bit. Then it should show up as an extra storage device under the my computer program
Download kies, it will install the Samsung drivers. After installation connect your phone and let it connect. It'll take about 5 minutes then you'll be good to go.
Sent from my SAMSUNG-SGH-I317 using xda premium
Still wish there was a Mac solution. Couldn't get my S3 to connect and neither my Note 2. I'm stuck using Windowz whenever I want to file transfer. .
And yes I've tried absolutely everything, but install Parallels on my Mac lol
Sent from my SGH-I317 using xda app-developers app

Android File Transfer

I would like to transfer some files from pc to my phone at a high speed. I installed it on my iMac running OS X 10.8.3. When I connect my Note 2 to iMac, the Android File Transfer pops up and always says "Try connection or restarting your device." I tried but no improvement at all. What is wrong or this software is unsuitable for these gears? Thanks!
Enable USB debugging then reconnect. Make sure you have installed the drivers.
Sent from my GT-N7100 using xda premium
I enabled the USB debugging on my phone and did not see any improvement. How can I ensure the drivers installed?
by re-installing them!!
Sent from my XT912 using Tapatalk 2

Unknown Device on any PC

Hi all,
I have a problem that i can't work out
I tired connecting my note to any pc but it just doesn't recognize it
I tried windows xp 7 and 8
Desktop and laptop
Tried changing the cables
Tried lots of different drivers and different usb ports 2 and 3
Just Don't know what to do
Pleaseeeee helllllpppp
Sent from my GT-N7100 using xda app-developers app
MaorHassan said:
Hi all,
I have a problem that i can't work out
I tired connecting my note to any pc but it just doesn't recognize it
I tried windows xp 7 and 8
Desktop and laptop
Tried changing the cables
Tried lots of different drivers and different usb ports 2 and 3
Just Don't know what to do
Pleaseeeee helllllpppp
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
Check whether you've firs installed Samsung USB Drivers in computer. Install KIES and it'll automatically install the drivers.
Also check the USB Debugging mode is not checked in your phone. It'll be there in Developer Options
adb non detect.
Yeah. I am having similar problem. Pc wont detect my phone even when usb debugging is on or off. Installed all necessary drivers and still wont detect. In fact my note 8.0 having the same problem. It was ok a few days back. Is it the phone or pc that is causing the problem? Note 2 was derooted and 8.0 original fw. Can anyone help?
yes i have the same issue as well
i have no idea why
Try to do everything from the begining. Uninstall all previous drivers that you have installed. Restart your computer. You could download and install Samsung drivers pack only if you don't use Kies (search on Google for the latest pack) or download and install latest Samsung Kies suite and install drivers that come with it. After that connect your phone to the PC using your USB cable. When it starts to search for drivers open that notification and you will see something like >> Skip obtaining drivers from internet<< Then it will automaticaly install drivers from PC (the one that you have installated previously) or it will prompt you to point to the folder where drivers were instalated. I can't remember exactly how it goes but this is the solution that worked for me...And you must click on skip for every single item (on driver list) or it will not be instalated properly...
Sent from my GT-N7100
i just connected now the phone to a brand new windows 7 installation that has no drivers at all
after 2 seconds i get USB DEVICE not recognize and thats it from there i cannot do anything
MaorHassan said:
i just connected now the phone to a brand new windows 7 installation that has no drivers at all
after 2 seconds i get USB DEVICE not recognize and thats it from there i cannot do anything
Click to expand...
Click to collapse
Install drivers first and than follow all the steps that I have mentioned in the post before...
Sent from my GT-N7100
I have it 2 just connect a couple times on the same port and then he connects by me
Sent from my GT-N7100 using xda app-developers app
No, it's useless to reinstall driver, just buy a new usb sync/charge cable, that works for me.
Sent from my GT-N7100 using xda app-developers app
i tried 10 cables
i tried installing new drivers on a fresh windows installation
and connect the device but after 2 seconds i get unknown device and red X and thats it
i just dont understand what else can i do to solve this issue its driving me CRAZY!!!!

[A] USB Device Not Recognized

Hey Guys,
So im having an issue for when i try to connect my note 2 running Jedi X20 to my windows 8.1 computer i get an error stating "USB Device Not Recognized". I have tried everything from trying different cables, downloading drivers, deleted and reinstalling drivers, checking to see if my phone is set to PDA, trying factory reset in TWRP, etc. i was wondering if anyone has successfully fixed this issue and they could help me.
I am trying to get my device connected so ODIN may recognize my device so i can revert it back to Stock.
My note 2 is also showing up as "unknown USB Device (Device Descriptor Request Failed)
Bodoct said:
My note 2 is also showing up as "unknown USB Device (Device Descriptor Request Failed)
Click to expand...
Click to collapse
Have you tried the USB ports on the back of the PC? If so....
Maybe try updating the drivers for the motherboard of your PC instead of using standard Windows 8.1 drivers. Assuming Windows 8.1 is recognizing all the USB ports you are trying to plug your cable into.
If this does not work and you have a copy of Windows 7, download Virtualbox and install Windows 7 as a virtual machine. Launch it make sure you have the USB settings inside the virtual machine setup to allow the USB to be used from Host PC.
Load the Samsung drivers in the Windows 7 virtual machine. I'm assuming those are the drivers you have stated you have downloading and reinstalled.
Sorry meant to say it's a laptop. Tried all ports and installing drivers. Unfortunately I don't have windows 7
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Just tested on windows 7 and it did recognize the device. I'm just having issues on 8.1 and can't seem to find a fix.
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
so i went out and bought another cord just for ****s and giggles and it fixed all my issues and i am now able to connect my device. for some reason my cord that came with the phone and another cord i had didnt want to work....
Congratulations. It's always the little things
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Yep a cheap gas station USB works over my perfect stock usb
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app

Categories

Resources