Related
The wifi can not find any router and i can not add any manually.
I have installed wifix but it did not help.
still not working.
any suggestions?
Are you on stock ROM or Custom ?
Stock ROM
ckpv5 said:
Are you on stock ROM or Custom ?
Click to expand...
Click to collapse
I'm custom rom, myONEv RC 2.0+sony xloud and bravia engine patch+ titanium kernel(max OC 1.5 GHz)
even when i wanted to install "WiFixRecovery_1.2_1.3.zip" , cwm recovery aborted(status 7).
This might help you since you're on custom rom
bOkz said:
hey guys question, i just unlocked and rooted my HTC One V phone and installed SuPrimo ROM successfully.
However when i tried to open wifi, it just says "turning on..." and in a couple of minutes "error"
please advice
Click to expand...
Click to collapse
shubhamchamaria said:
Flash boot.img included in the Rom.zip through fastboot...
Sent from my HTC One V using XDA
Click to expand...
Click to collapse
bOkz said:
This might help you since you're on custom rom
Click to expand...
Click to collapse
First, i flashed the boot.img included in "myONEvRCv2.0.zip".(using hasoon2000 AIO toolkit 1.1)
Then i flashed TITANIUM kernel.(using hasoon2000 AIO toolkit 1.1):good:
--------------------------------------------------------------------------------
when i wanted to install "WiFixRecovery_1.2_1.3.zip" , cwm recovery aborted(status 7).
What is "status 7"???
can any one help?
alifa said:
What is "status 7"???
Click to expand...
Click to collapse
It means that the updater-script mount partition with wrong arguments.
Simply means the zip is not for your device.
---------- Post added at 01:46 PM ---------- Previous post was at 01:42 PM ----------
alifa said:
I'm custom rom, myONEv RC 2.0+sony xloud and bravia engine patch+ titanium kernel(max OC 1.5 GHz)
even when i wanted to install "WiFixRecovery_1.2_1.3.zip" , cwm recovery aborted(status 7).
Click to expand...
Click to collapse
Why don't you try one by one to see what is the actual problem.
1) fastboot flash boot boot.img (in bootloader - use the boot.img that comes with the rom).
2) boot to recovery
3) install the ROM
4) reboot and setup everything and check whether wifi is working or not.
If it works, then you can proceed with sony xloud - check wifi again
If it works, then you proceed with bravia engine patch - check wifi again
If it works, then you can flash titanium kernel - check wifi again
If all above, wifi works, then it works. If any of them make wifi error, leave that one out.
i use everything listed above and no such problems with wifi to me
dont just say thanks hit thanks if i helped
a true lfc supporter
and a former symbian lover
sent from my awesome HTC One V running rc 2.0 by CKPV5 -using xda premium
SUPPORT THE SOFTWARE DEVELOPER'S IF YOU LIKE THE GAME / APP BUY IT
to ckpv5
i have done the things you said, didn't help.
I forgot to mention that i had this problem with the stock rom so i switched to your rom.
ps: i have a Taiwanese one v.
When you have this problem on stock rom, no custom rom can solve this problem. It's best to revert to stock rom and send to htc centre for checking. It maybe hardware problem
do you have stock recovery.img and stock boot.img?
All my files in my laptop that I sent for repair.
But you can extract it on your own provided you have the right RUU.
Just follow this simple step that I wrote for One X
http://forum.xda-developers.com/showpost.php?p=27586482&postcount=1235
i solved it!!
first take out the sim card, then install wifix then dial *#94349*.
i didn't know the first step.
sorry for bothering you with my foolish mistake.
after restarting my phone and inserting my sim, it says "linksys"(my access point) not in range.
i had the problem before.
Hey guys I'm currently on android version 4.0.4 not sure what version this is jelly bean or ICS however if this is ice cream sandwich and my phone is currently rooted and the boot loader is unlocked will updating the software affect my phone :laugh:
No!
Are u on a Custom ROM?
If ur on only Stock+Root then u can do and OTA(Update) and no nothing will happen to ur phone
aman360elite said:
Are u on a Custom ROM?
If ur on only Stock+Root then u can do and OTA(Update) and no nothing will happen to ur phone
Click to expand...
Click to collapse
I'm currently on stock not thinking of going to a custom rom at the moment thanks for your help. :good:
cobby911 said:
I'm currently on stock not thinking of going to a custom rom at the moment thanks for your help. :good:
Click to expand...
Click to collapse
Here you go mate, thanks for providing your CID you are all good to go, here you go:
Firstly you will need to download the rom you wish to use and this tool
http://forum.xda-developers.com/showthread.php?t=1924003
(this is the mutt's nuts, the dog's bollox, the Jap's baps or whatever, its great)
You will firstly need to put the rom zip on your sdcard
Then boot your phone into fastboot
Then use the tool in the link above This will flash the firmware you need and also boot.img for the rom you want to install. Just unzip the download, put the boot.img in the root of that unzipped folder and then execute the bat file. It will talk you through what its doing.
After that, boot into recovery and flash the rom
---------- Post added at 07:09 PM ---------- Previous post was at 06:56 PM ----------
Oh yeah you will also need to put the unlock token you originally used in with the boot.img
Hello everyone,
I have spent the last 7 hours trying to unroot my LG G Pad 8.3 Google Play Edition, but nothing I have tried works. The method I tried was to flash toe stock boot, recovery, and system via the Windows command line. Now, my tablet gets stuck at the "Google" logo when I try to boot it, and I get the red exclamation error when I try to boot into recovery. Does anyone have any first had experience unrooting the GPE G Pad, and can my tablet be salvaged or do I need to buy a new one?
TomTom093 said:
Hello everyone,
I have spent the last 7 hours trying to unroot my LG G Pad 8.3 Google Play Edition, but nothing I have tried works. The method I tried was to flash toe stock boot, recovery, and system via the Windows command line. Now, my tablet gets stuck at the "Google" logo when I try to boot it, and I get the red exclamation error when I try to boot into recovery. Does anyone have any first had experience unrooting the GPE G Pad, and can my tablet be salvaged or do I need to buy a new one?
Click to expand...
Click to collapse
Yes, you can at least salvage your tablet. Download latest twrp recovery, and install it in download mode. Then download the 510 ROM from the developer section onto an sdcard, insert sdcard into tablet, mount in recovery, install the ROM. You can then try again if you wish. Make changes one at a time, slowly!
There may be a different way, but this seems the easiest to me.
Why did you want to unroot?
sleekmason said:
Yes, you can at least salvage your tablet. Download latest twrp recovery, and install it in download mode. Then download the 510 ROM from the developer section onto an sdcard, insert sdcard into tablet, mount in recovery, install the ROM. You can then try again if you wish. Make changes one at a time, slowly!
There may be a different way, but this seems the easiest to me.
Why did you want to unroot?
Click to expand...
Click to collapse
Thank you for the tip, I'll give that a try now. And I rooted to try to install Cyanogen, but the milestone releases kept giving me the "process com.android.phone has stopped" and the nightlies couldn't connect to my Wifi.
sleekmason said:
Yes, you can at least salvage your tablet. Download latest twrp recovery, and install it in download mode. Then download the 510 ROM from the developer section onto an sdcard, insert sdcard into tablet, mount in recovery, install the ROM. You can then try again if you wish. Make changes one at a time, slowly!
There may be a different way, but this seems the easiest to me.
Why did you want to unroot?
Click to expand...
Click to collapse
So, I've tried flashing the 510 ROM both in the ZIP folder and in the extracted TOT file type, and am getting errors on both. Neither one will flash. Any tips?
TomTom093 said:
So, I've tried flashing the 510 ROM both in the ZIP folder and in the extracted TOT file type, and am getting errors on both. Neither one will flash. Any tips?
Click to expand...
Click to collapse
You can't install cyanogen mod on the gpe. There are no custom Roms other than the modified stock ROM for the 510.
Let's start from the beginning... Did you install twrp 2.7.0.1? And can you boot into recovery?
Then, did you take out your sdcard and install the modified 510 ROM onto the sdcard from your computer?
Then reinstalled your sdcard to your tablet, rebooted to recovery again, mounted your sdcard, and then flashed the modified 510 ROM?
---------- Post added at 12:48 AM ---------- Previous post was at 12:37 AM ----------
sleekmason said:
You can't install cyanogen mod on the gpe. There are no custom Roms other than the modified stock ROM for the 510.
Let's start from the beginning... Did you install twrp 2.7.0.1? And can you boot into recovery?
Then, did you take out your sdcard and install the modified 510 ROM onto the sdcard from your computer?
Then reinstalled your sdcard to your tablet, rebooted to recovery again, mounted your sdcard, and then flashed the modified 510 ROM?
Click to expand...
Click to collapse
Don't forget to erase dalvik and cache before you install the rom
sleekmason said:
Yes, you can at least salvage your tablet. Download latest twrp recovery, and install it in download mode. Then download the 510 ROM from the developer section onto an sdcard, insert sdcard into tablet, mount in recovery, install the ROM. You can then try again if you wish. Make changes one at a time, slowly!
There may be a different way, but this seems the easiest to me.
Why did you want to unroot?
Click to expand...
Click to collapse
sleekmason said:
You can't install cyanogen mod on the gpe. There are no custom Roms other than the modified stock ROM for the 510.
Let's start from the beginning... Did you install twrp 2.7.0.1? And can you boot into recovery?
Then, did you take out your sdcard and install the modified 510 ROM onto the sdcard from your computer?
Then reinstalled your sdcard to your tablet, rebooted to recovery again, mounted your sdcard, and then flashed the modified 510 ROM?
---------- Post added at 12:48 AM ---------- Previous post was at 12:37 AM ----------
Don't forget to erase dalvik and cache before you install the rom
Click to expand...
Click to collapse
Yes, I have the latest TWRP, can boot into recovery, wiped cache and dalvik, and I am still getting errors. I am using the ROM found here: http://forum.xda-developers.com/wiki/LG_G_Pad_8.3/LG-V510
TomTom093 said:
Yes, I have the latest TWRP, can boot into recovery, wiped cache and dalvik, and I am still getting errors. I am using the ROM found here: http://forum.xda-developers.com/wiki/LG_G_Pad_8.3/LG-V510
Click to expand...
Click to collapse
No, use the modified 510 stock ROM in the developer section of this forum. Using the " official" ROM won't get you anywhere.
sleekmason said:
No, use the modified 510 stock ROM in the developer section of this forum. Using the " official" ROM won't get you anywhere.
Click to expand...
Click to collapse
Where is that at? I'm sorry for all the newb questions.
TomTom093 said:
Where is that at? I'm sorry for all the newb questions.
Click to expand...
Click to collapse
In this section: here
You can also find my kernel in the same section.
---------- Post added at 09:30 AM ---------- Previous post was at 09:28 AM ----------
TomTom093 said:
Where is that at? I'm sorry for all the newb questions.
Click to expand...
Click to collapse
Here is the ROM page. http://forum.xda-developers.com/showthread.php?t=2645226
sleekmason said:
In this section: here
You can also find my kernel in the same section.
---------- Post added at 09:30 AM ---------- Previous post was at 09:28 AM ----------
Here is the ROM page. http://forum.xda-developers.com/showthread.php?t=2645226
Click to expand...
Click to collapse
IT WORKS! Thank you so much!
TomTom093 said:
IT WORKS! Thank you so much!
Click to expand...
Click to collapse
Good! Please Edit the title by adding "Solved" So others will know a possible answer.
sleekmason said:
Good! Please Edit the title by adding "Solved" So others will know a possible answer.
Click to expand...
Click to collapse
Hello,
Sorry to dig up an old thread, but is it possible to reflash the stock recovery so I can receive OTA updates?
TomTom093 said:
Hello,
Sorry to dig up an old thread, but is it possible to reflash the stock recovery so I can receive OTA updates?
Click to expand...
Click to collapse
Yes it is. But it's much easier to just sideload the update. Two threads I'd General section with links and instructions.
cam30era said:
Yes it is. But it's much easier to just sideload the update. Two threads I'd General section with links and instructions.
Click to expand...
Click to collapse
I get that, I'm doing it right now.But I'd still rather have everything stock
cam30era said:
Yes it is. But it's much easier to just sideload the update. Two threads I'd General section with links and instructions.
Click to expand...
Click to collapse
And actually, do it isn't; I'd rather have the OTA. Is there a help guide for that?
TomTom093 said:
And actually, do it isn't; I'd rather have the OTA. Is there a help guide for that?
Click to expand...
Click to collapse
It's part of the first pinned thread in the general section. You'll have to sift through it.
---------- Post added at 08:17 PM ---------- Previous post was at 08:15 PM ----------
TomTom093 said:
I get that, I'm doing it right now.But I'd still rather have everything stock
Click to expand...
Click to collapse
I don't know if you realize this, but the sideload update is 100% stock. Exactly the same thing you'll get with the OTA. Just a different delivery method.
cam30era said:
It's part of the first pinned thread in the general section. You'll have to sift through it.
---------- Post added at 08:17 PM ---------- Previous post was at 08:15 PM ----------
I don't know if you realize this, but the sideload update is 100% stock. Exactly the same thing you'll get with the OTA. Just a different delivery method.
Click to expand...
Click to collapse
Okay, I've tried this thread http://forum.xda-developers.com/showthread.php?t=2448960 to restore my device to stock, and get one of two errors. Either I use the V510 dll and it displays an error saying I have to be in online mode, or I use the other dll and it doesn't flash. What am I doing wrong?
TomTom093 said:
Okay, I've tried this thread http://forum.xda-developers.com/showthread.php?t=2448960 to restore my device to stock, and get one of two errors. Either I use the V510 dll and it displays an error saying I have to be in online mode, or I use the other dll and it doesn't flash. What am I doing wrong?
Click to expand...
Click to collapse
You're not doing anything wrong. This won't work for V510 running 4.4.2.
cam30era said:
You're not doing anything wrong. This won't work for V510 running 4.4.2.
Click to expand...
Click to collapse
Then what will?
TomTom093 said:
Then what will?
Click to expand...
Click to collapse
Flash the 4.4.4 update via twrp. I don't know any other way. If you don't want to do that, then post your question on the V510 update thread in the general section.
Hello, I'am a new member on the forum, and I need your help. (I'm from Chile so don't blame me for my english). I get a HTC M9 today, and I was so exciting for put it android 7.0, so I unlocked the bootloader and then I instaled TWRP 3.0.2. The thing is that i reboot the phone into the OS and the phone stucks on HTC logo. I think maybe a choosed install SU from the recovery menu and now I don't now what to do to fix it. Please can you help me?
panxof10 said:
Hello, I'am a new member on the forum, and I need your help. (I'm from Chile so don't blame me for my english). I get a HTC M9 today, and I was so exciting for put it android 7.0, so I unlocked the bootloader and then I instaled TWRP 3.0.2. The thing is that i reboot the phone into the OS and the phone stucks on HTC logo. I think maybe a choosed install SU from the recovery menu and now I don't now what to do to fix it. Please can you help me?
Click to expand...
Click to collapse
Installing another rom may help you.
casdx said:
Installing another rom may help you.
Click to expand...
Click to collapse
Well, I installed cyanogen mod 13 and it worked, but now the problem is that the phone doesn't read any sim card. I think it's the baseband. What should i do now? Thanks a lot for answering
panxof10 said:
Well, I installed cyanogen mod 13 and it worked, but now the problem is that the phone doesn't read any sim card. I think it's the baseband. What should i do now? Thanks a lot for answering
Click to expand...
Click to collapse
i have the same problem right now.
i've read that you must install your previous boot.img to fix it but i didnt do a backup
---------- Post added at 04:01 AM ---------- Previous post was at 03:38 AM ----------
panxof10 said:
Well, I installed cyanogen mod 13 and it worked, but now the problem is that the phone doesn't read any sim card. I think it's the baseband. What should i do now? Thanks a lot for answering
Click to expand...
Click to collapse
ok i've fix it use this https://mega.nz/#!vAJyHKAY!tsRfi9d1i54O6fz5ORp68N8GiOnn_tbblItWBsd7YMk this one helped me just flash it and reboot.
if thats not your boot then use this https://mega.nz/#!vZ5kmLZA!ABAE0mTQ2JotiiQTSKeLJXraCxxByQQ-JMGQZUga_1g
Reapply RUU.zip appropriate to your MID through DOWNLOAD mode. Rename RUU.zip to 0PJAIMG.zip and place on root of your sd card. Press the "UP VOLUME" key in download mode to flash 0PJAIMG.zip.
casdx said:
i have the same problem right now.
i've read that you must install your previous boot.img to fix it but i didnt do a backup
Click to expand...
Click to collapse
That's only correct for sense-based roms. For non-sense-based roms like CM you need to flash thicklizard's mono kernel.
Sent from my HTC One M9 using XDA Labs
Hi, I need help with my phone.
A week ago, unlock the bootloader to install a custom ROM, more specifically Lineage OS. Everything worked correctly until one day I had a sudden reboot, did not take much importance at the beginning because I knew it was in beta, but since that day the phone does not charge the battery when I connect it or recognize it the pc, except when I restart the telephone with the cable previously connected to the power supply or to the PC.
just a moment ago I realized that in the fastboot mode if it recognizes when I connect the cable to both the current and the PC, so it is unloading the fact that it is my USB cable type C.
I am thankful for any kind of help.
So you're running a Beta of the Lineage ROM, correct? If so is it the Official version made by the Lineage Team, or is it Unofficial/ported to your device by somebody else?
Dubstepwolf123 said:
So you're running a Beta of the Lineage ROM, correct? If so is it the Official version made by the Lineage Team, or is it Unofficial/ported to your device by somebody else?
Click to expand...
Click to collapse
I reinstalled stock because I thought the problem was some incompatibility with lineage, but the problem remains the same
RichterXPunk said:
I reinstalled stock because I thought the problem was some incompatibility with lineage, but the problem remains the same
Click to expand...
Click to collapse
Maybe it could be an issue with the kernel, try flashing the kernel for your device.
Dubstepwolf123 said:
Maybe it could be an issue with the kernel, try flashing the kernel for your device.
Click to expand...
Click to collapse
Allright i'm going ti try it. Thanks
Dubstepwolf123 said:
Maybe it could be an issue with the kernel, try flashing the kernel for your device.
Click to expand...
Click to collapse
I can't find a tutorial, could you help me please?
Here is a tutorial: https://www.youtube.com/watch?v=alk_ZQo2hSE&t=1s
Just follow it, you will have to find either a stock Kernel for the Z2 Play or find a custom one that works well.
Another question... does your device charge while in TWRP (you have TWRP right?)
---------- Post added at 05:12 AM ---------- Previous post was at 05:11 AM ----------
RichterXPunk said:
I can't find a tutorial, could you help me please?
Click to expand...
Click to collapse
Here is a tutorial: https://www.youtube.com/watch?v=alk_ZQo2hSE&t=1s
Just follow it, you will have to find either a stock Kernel for the Z2 Play or find a custom one that works well.
Another question... does your device charge while in TWRP (you have TWRP right?)
Dubstepwolf123 said:
Here is a tutorial:
&t=1s
Just follow it, you will have to find either a stock Kernel for the Z2 Play or find a custom one that works well.
Another question... does your device charge while in TWRP (you have TWRP right?)
---------- Post added at 05:12 AM ---------- Previous post was at 05:11 AM ----------
Here is a tutorial:
&t=1s
Just follow it, you will have to find either a stock Kernel for the Z2 Play or find a custom one that works well.
Another question... does your device charge while in TWRP (you have TWRP right?)
Click to expand...
Click to collapse
Yes it charges in twrp. Thanks .
Dubstepwolf123 said:
Here is a tutorial:
&t=1s
Just follow it, you will have to find either a stock Kernel for the Z2 Play or find a custom one that works well.
Another question... does your device charge while in TWRP (you have TWRP right?)
---------- Post added at 05:12 AM ---------- Previous post was at 05:11 AM ----------
Here is a tutorial:
&t=1s
Just follow it, you will have to find either a stock Kernel for the Z2 Play or find a custom one that works well.
Another question... does your device charge while in TWRP (you have TWRP right?)
Click to expand...
Click to collapse
I can't find a kernel, but i try installing a custom ROM and it won't change.