Related
Hey Everyone,
It appears that the MTP Dialog stopped popping up when I plugged in my phone both on Windows 7 (64-bit) and Ubuntu Linux (64-Bit).
It went from working to not working and I haven't been able to isolate the problem. I reinstalled the drivers on my computer along with flashing back to the stock kernal.
I figured it had something to do with Drivers on either end. Such as the Device or my Computer...
Has anyone else received a similar problem and could possible point me to some articles or something?
-Kyle S.
Did you recently backup your IMEI using qpst ? If so you'll need to turn mtp back on in usbsettings
Sent from my SGH-I747M using xda app-developers app
blue265 said:
Did you recently backup your IMEI using qpst ? If so you'll need to turn mtp back on in usbsettings
Sent from my SGH-I747M using xda app-developers app
Click to expand...
Click to collapse
I had never used QPRT but it was related to the QualComm USB settings.
I used the Extension to get into the settings and turn the USB back on.
Thanks for the direction! You're amazing!
-Kyle S.
I am trying to connect my galaxy s3 to my windows computer and it will not install the drivers. Has anyone experienced this yet. I am rooted and running cm9 nightly. I also have a custom kernel installed. This was working when i rooted a couple of weeks ago. When I plug my phone into the usb it searches for drivers and display an error message that say it was unsuccessful at installing drivers. Any help would be greatly appreciated.
Have you tried uninstalling and reinstalling kies? I got a pop up on my phone when i plugged it in last time and it said it couldnt find the software but yet i was able to connect to kies and go into phone through windows.
Sent from my SGH-T999 using Tapatalk 2
Since I got my phone it hasn't connected to my pc. I have the drivers but I get a "hardware id missing" error. I've uninstalled and reinstalled the drivers but it won't connect. Works fine in ubuntu tho. Idk
Sent from my SGH-T999 using xda app-developers app
Uninstall Kies if you have it. And install drivers again. That should do the trick.
Sent from my SGH-T999
crushbox311 said:
I am trying to connect my galaxy s3 to my windows computer and it will not install the drivers. Has anyone experienced this yet. I am rooted and running cm9 nightly. I also have a custom kernel installed. This was working when i rooted a couple of weeks ago. When I plug my phone into the usb it searches for drivers and display an error message that say it was unsuccessful at installing drivers. Any help would be greatly appreciated.
Click to expand...
Click to collapse
I experienced a similar issue, it may have to do with the fact that I didn't wipe cache partition and wiped dalvik cache when installing zip from sd card etc... I don't know what caused it, but nothing I could do (including re-installing drivers a couple of times from KIES and tying it on a different laptop etc.) would fix it until I did a wipe data/factory reset by mistake! (instead of wiping catche partition) ;<( and that seemed to do the job!
Perhaps you may want to try doing a "wipe catche partition" and "Wipe Dalvik Cache" from CWM before tying to go ahead a do a "wipe data/factory reset"?
crushbox311 said:
I am trying to connect my galaxy s3 to my windows computer and it will not install the drivers. Has anyone experienced this yet. I am rooted and running cm9 nightly. I also have a custom kernel installed. This was working when i rooted a couple of weeks ago. When I plug my phone into the usb it searches for drivers and display an error message that say it was unsuccessful at installing drivers. Any help would be greatly appreciated.
Click to expand...
Click to collapse
This occured with me when I was using early build of CM10, the system fails to recognize the MTP and screws the drivers..
I say you revert back to nandroid, and reflash cm9
chrisram88 said:
Uninstall Kies if you have it. And install drivers again. That should do the trick.
Sent from my SGH-T999
Click to expand...
Click to collapse
I have buddy. Several times. And I've never installed Kies. Idk what it even does lol
Sent from my SGH-T999 using xda app-developers app
mikeyinid said:
Since I got my phone it hasn't connected to my pc. I have the drivers but I get a "hardware id missing" error. I've uninstalled and reinstalled the drivers but it won't connect. Works fine in ubuntu tho. Idk
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
have the same problem
I did have that 'hardware ID missing' error suddenly after i was connecting my phone to my laptop just fine. my desktop has no problem. i did a few things that seemed to have fixed it or steps for a solution. I downloaded the TMO Samsung drivers. if you already have it installed, try uninstalling it. If that doesn't work, toggle USB debugging in between connecting and disconnecting from the computer. Other times, toggling USB debugging wouldn't work, so i toggled in between MTP and PTP. i play with a few times til it work. hope that helps. i can't post the link the the drivers yet, but get it from samsung's website.
i'm on gsm r6 and trinity kernel
Since I've gotten the phone I've had to keis air everything. Hardware I'd missing error on every PC/laptop I owned.
Up until yesterday. Plugged it in and keis opened. Connection troubleshooting joppy. It redownloaded and installed drivers. Like if always has...but this time it actually worked and so does my mtp now.
I wonder if its ROM related. Before I was using stock with the problem. The aokp unofficial r6 with the problem.
But now I'm running the official aokp jellybean release and it works.
I dunnnoooooo. Unicorn is mighty!
Sent from my Unicorn powered T999
whatmonster said:
Since I've gotten the phone I've had to keis air everything. Hardware I'd missing error on every PC/laptop I owned.
Up until yesterday. Plugged it in and keis opened. Connection troubleshooting joppy. It redownloaded and installed drivers. Like if always has...but this time it actually worked and so does my mtp now.
I wonder if its ROM related. Before I was using stock with the problem. The aokp unofficial r6 with the problem.
But now I'm running the official aokp jellybean release and it works.
I dunnnoooooo. Unicorn is mighty!
Sent from my Unicorn powered T999
Click to expand...
Click to collapse
I also got mine working last night. But after a reboot I got the same error again. Idk what it means.
Sent from my Galaxy Nexus using xda app-developers app
chrisram88 said:
Uninstall Kies if you have it. And install drivers again. That should do the trick.
Sent from my SGH-T999
Click to expand...
Click to collapse
I tried uninstalling Kies and that didn't work. I have to re-flash CyogenMod to get it to work again. Wierd!
From my experiences it only ever occurs when Kies is running, even in the background, while usb debugging is enabled. If kies isnt running then its all good.
I ran into this using CM9; seems to me that Samsung is using MTP protocol's now instead of USB. I just use Driod Explorer with debugging and I can move files without any issues.
If you are wanting to just transfer files to/from computer try SwiFTP. I love this little program.
Original dev no longer supports but its been picked up by another. Download latest version here.
http://ppareit.github.com/swiftp/
Sent from my SGH-T999 using xda app-developers app
Please help my gs3 won't connect to any computer
I have tried on four different computers to plug my gs3 but phone never show any option on screen and computer never finds phone plugged in. I also used tried with different usb cables and resetting to factory but the result is same. All it does is charging the phone on all computers without any message or options on the screen. I am thinking there is something wrong cause it never found plugged into any computer nor any computer tried to install the driver.
If someone have experienced this please let me know what should I do to connect it to PC?
fix a "hardware id missing" error
1. install latest version of kies.
2. uninstall SAMSUNG USB Driver for Mobile Phones version 1.5.9.0
3. download and install SAMSUNG USB Driver for Mobile Phones 1.5.6.0
4. connect the phone let it install...thats it.
5..open kies update firmware, backup or whatever
pate201 said:
I have tried on four different computers to plug my gs3 but phone never show any option on screen and computer never finds phone plugged in. I also used tried with different usb cables and resetting to factory but the result is same. All it does is charging the phone on all computers without any message or options on the screen. I am thinking there is something wrong cause it never found plugged into any computer nor any computer tried to install the driver.
If someone have experienced this please let me know what should I do to connect it to PC?
Click to expand...
Click to collapse
it turned out that phone is defective, they are getting me replacement.
SOLVED!
crushbox311 said:
I am trying to connect my galaxy s3 to my windows computer and it will not install the drivers. Has anyone experienced this yet. I am rooted and running cm9 nightly. I also have a custom kernel installed. This was working when i rooted a couple of weeks ago. When I plug my phone into the usb it searches for drivers and display an error message that say it was unsuccessful at installing drivers. Any help would be greatly appreciated.
Click to expand...
Click to collapse
:good:SOLVED! Check this thread
Connecting Galaxy S3
mikeyinid said:
I have buddy. Several times. And I've never installed Kies. Idk what it even does lol
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
From talking to Samsung Advanced Technical Help, I learned that, although it is never mentioned on any site or any literature, if you have
Samsung Studio 3 and/or Samsung New Studio and the USB drivers, uninstall ALL. I use Revo Uninstaller. Then reinstall the USB drivers from Samsung site. Make sure WiFi and Bluetooth are turned off,on the phone, and connect the phone. Should work.
I have upgraded to an S3 from having a Vibrant for years. I rooted and flashed several OS's to my Vibrant in those years without an issue ever. I have been trying to get files transferred to my S3 from my computer for 2 weeks now. The computer has the drivers installed correctly. It is recognized by name when I plug it in (it comes up as SGH-T999, Kies will recognize it too). whenever i try to transfer ANYTHING it stops in the middle of the transfer. just sits there with no further progress to be achieved. This is insanely frustrating. I am unable to root this thing because of the inability to actually transfer.
Things I have tried:
Uninstalling/reinstalling Kies multiple times
Uninstalling all USB device drivers multiple times
Reinstalling drivers through Kies and through Samsung's website multiple times
Factory reset on the phone multiple times (****ing aggravating btw)
Using my old Vibrant cable
Changing between MTP and camera mode... several times
Yelling at it
I have been trying to research how to fix this garbage for weeks now. there is no concrete way to remedy this problem that i have found. every thread about this is littered with the usual "uninstall your driver and reinstall it" nonsense that is the most generic response to anything tech related ever.
What I can tell you is that my phone is definitely getting recognized by anything that can do so. Odin, Kies, My computer, etc etc... it appears that the issue lies in the actual data transfer. As I mentioned, transfers initiate but will lock up mid-process and just hang there infinitely. Same goes with Odin when I try to get it to flash into CWM recovery.
Please, help. any time spent trying to fix this issue is greatly appreciated.
Are you uding the usb cable thst came with the phone?
Have you tried different cables? Or on another computer?
Im guessing your not rooted then?
Try installing the drivers ONLY. get them here:
http://forum.xda-developers.com/showthread.php?t=1728605
Uninstall previous versions of everything first.
What version odin are you using? Use 3.07 from above post if you're not already.
Also try this app
http://forum.xda-developers.com/showthread.php?t=1711009
If you are rooted try SwiFTP or another wireless transfer app.
Sorry to mention drivers again but if you're relying on kies to do that for you it could be the issue.
Sent from my SGH-T999 using xda app-developers app
---------- Post added at 01:41 PM ---------- Previous post was at 01:40 PM ----------
Sorry I missed the part where you mentioned drivers and cable. Damn choppy xda app!
Sent from my SGH-T999 using xda app-developers app
Since you've tried everything else might as well follow this guide and install the drivers through the toolkit.
http://forum.xda-developers.com/showthread.php?p=28175575
I'd also run windows update and check if there's a new bios/drivers for your mobo and usb controller.
If you plug another "foreign" usb device does it install fine?
May not have any bearing whatsoever here but do you have usb debugging checked? And I think I mentioned it in the other post but try a different computer if possible.
You said that this happens when using odin too? As in you start the flash with Odin but it doesn't complete? Or it wont even start? Does it give you any message?
When plugged in in download mode, does Odin show your COM port in the upper left?
Plug in the phone and open device manager. Does it show any errors or anything?
Sent from my SGH-T999 using xda app-developers app
I recommend an app called airdroid. I had issues transferring stuff to and from my Mac and haven't had any problems since I started using the program. Besides it's wireless so I don't have to worry about the wires being a problem
psykhotic said:
Since you've tried everything else might as well follow this guide and install the drivers through the toolkit.
http://forum.xda-developers.com/showthread.php?p=28175575
I'd also run windows update and check if there's a new bios/drivers for your mobo and usb controller.
If you plug another "foreign" usb device does it install fine?
Click to expand...
Click to collapse
everything else works fine from my 6 USB ports (2 USB 3.0 ports as well). The tool kit solution still needs Odin to root. The problem is not detecting the device. it is the transferring of data. Data transfers begin but that's about it. Odin gets to "firmware update start" and then "boot.img" and just hangs there forever. no change. nothing else.
Is there a wireless way to do this? I have purchased Rom Manager but since i can't achieve root it is just useless now. The phone is brand new from the Tmobile store. Not once has it been dropped (to put into perspective how careful i am with my devices, I managed to drop my Vibrant once in ~3 years, which caused no damage, what a great phone that was). I have not been able to read about this same issue anywhere else either...generally its an issue with the PC not recognizing the device but when someone gets it to link up correctly, it works. this is the opposite.
thank you for your ideas so far.
DocHoliday77 said:
May not have any bearing whatsoever here but do you have usb debugging checked? And I think I mentioned it in the other post but try a different computer if possible.
You said that this happens when using odin too? As in you start the flash with Odin but it doesn't complete? Or it wont even start? Does it give you any message?
When plugged in in download mode, does Odin show your COM port in the upper left?
Plug in the phone and open device manager. Does it show any errors or anything?
Click to expand...
Click to collapse
Odin shows the "0:COM" like it should, which means it is able to read that the device is there, it just is unable to do anything after "boot.img", everything that is needed for this to work via the toolkit method is checked (USB debug and unknown sources).
I just got the s3 and had transfer issues too. Turns out my s2 drivers wasn't perfect for it even though it recognizes the device. I used the s3 drivers instead and that helped things a bit with accessing my phone's storage. So i ended up formatting my internal storage and that seems to do the trick for me.
If that doesn't work and odin still gets stuck then try different usb ports also try different wires
Sent from my SGH-T999 using xda app-developers app
Try connecting without the external sdcard in.
What build are you currently on. Since you haven't roited or anything im assuming you're still on either UVALEM or UVALG1. If so try initiating the software update. It should download the ota thatll take you up to UVALH2. Maybe that'll help.
Sent from my SGH-T999 using xda app-developers app
DocHoliday77 said:
Try connecting without the external sdcard in.
What build are you currently on. Since you haven't roited or anything im assuming you're still on either UVALEM or UVALG1. If so try initiating the software update. It should download the ota thatll take you up to UVALH2. Maybe that'll help.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Currently do not have an external SD.
Baseband version T999UVLH2 is what i have running after a fresh phone reset.
Teo032 said:
So i ended up formatting my internal storage and that seems to do the trick for me.
Click to expand...
Click to collapse
Did you do that through terminal? doesn't the single partition mean that it would wipe everything?
Make sure the drivers you are using are the same ones that are in my comment (version).
What are you trying to flash through Odin? If the permissions of the files inside the tar file are not correct, the transfer will hang, and do nothing but give a timeout message after a couple minutes. I learned this the hard way.
In summary:
Use a different USB cable.
Download drivers, Odin, and CWM from my signature. After uninstalling the old drivers manually through devman (be sure to delete them during uninstall), reinstall them from the package you downloaded. Then use Odin to flash CWM. All three of these packages are tested and known to be 100% working. Please don't ignore this step. If I can't verify the validity of your installation sources, I can't rule this out for troubleshooting purposes.
If this doesn't work, it is most likely your computer. Are there any BIOS firmware updates that improve USB compatibility, or USB controller driver updates? The USB 3.0 isn't natively supported on =< Win7, so those are third party drivers. But I will assume you are connected to a USB 2.0 port.
Aerowinder said:
Make sure the drivers you are using are the same ones that are in my comment (version).
What are you trying to flash through Odin? If the permissions of the files inside the tar file are not correct, the transfer will hang, and do nothing but give a timeout message after a couple minutes. I learned this the hard way.
In summary:
Use a different USB cable.
Download drivers, Odin, and CWM from my signature. After uninstalling the old drivers manually through devman (be sure to delete them during uninstall), reinstall them from the package you downloaded. Then use Odin to flash CWM. All three of these packages are tested and known to be 100% working. Please don't ignore this step. If I can't verify the validity of your installation sources, I can't rule this out for troubleshooting purposes.
If this doesn't work, it is most likely your computer. Are there any BIOS firmware updates that improve USB compatibility, or USB controller driver updates? The USB 3.0 isn't natively supported on =< Win7, so those are third party drivers. But I will assume you are connected to a USB 2.0 port.
Click to expand...
Click to collapse
None of that worked. I did find a BIOS upgrade for my mobo that i didnt know was released, flashed it, and transfers still hang. i tried everything from your sig to no avail. i DON'T have access to another computer... BUT i do have Ubutnu running on my comp in conjunction with Win 7 Ultimate 64. can't seem to find too much on non-international S3 stuff for linux.
this has consumed my entire day and i am so frustrated.
Try in safe mode? This sounds really frustrating. I gave up when this happened with my mac. I think someone said it already but I always recommend Airdroid. It's just simpler.
psykhotic said:
Try in safe mode? This sounds really frustrating. I gave up when this happened with my mac. I think someone said it already but I always recommend Airdroid. It's just simpler.
Click to expand...
Click to collapse
airdroid for music transfers, got it. im screwed on the root thing though.
I didn't do it through terminal. I just connect it to the computer. Right click phone's internal storage and clicked format. It was a very quick format.
Sent from my SGH-T999 using xda app-developers app
Teo032 said:
I didn't do it through terminal. I just connect it to the computer. Right click phone's internal storage and clicked format. It was a very quick format.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
so let me get this straight... you plugged the phone in, right clicked on it in a browser window, clicked on format, selected yes to the "hey, this is going to erase everything on the device" warning pop up, and you were able to transfer files no problem after that? no adverse side effects came from this? it sounds like it would brick the phone...
Spaldino said:
so let me get this straight... you plugged the phone in, right clicked on it in a browser window, clicked on format, selected yes to the "hey, this is going to erase everything on the device" warning pop up, and you were able to transfer files no problem after that? no adverse side effects came from this? it sounds like it would brick the phone...
Click to expand...
Click to collapse
Yep that's what i did. That's only the storage partition. There's a system partition that isn't viewable on window explorer
Sent from my SGH-T999 using xda app-developers app
Teo032 said:
Yep that's what i did. That's only the storage partition. There's a system partition that isn't viewable on window explorer
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
didn't work either. i give up. MTP is garbage.
Different computer?
Sent from my SGH-T999 using xda app-developers app
I had these frustrations as well. I finally move where I was connecting the cables. First instinct was the easiest access on my computer. It always failed. I finally decided to try my back usb and it worked it also picked up as a mass storage as well.
Sent from my SGH-T999 using xda app-developers app
Yeah I'm starting to think you might need to use a different computer. Odin detects so it's not drivers.
From my experience with the hangs when i was on the s2. Many also reported this but what helped was different usb ports, wires, or an entirely different computer.
Sent from my SGH-T999 using xda app-developers app
My Mac won't connect to my gs3 using Kies... Yes I have drivers installed, you switched my usb cable to both usb ports, used media usb mode and camera mode, ticked and unticked usb debugging, I've done everything except factory reset.. Called Samsung and they were no help......... Anyone? I Bueller...... Bueller....... Bueller
Sent from my SAMSUNG-SGH-I747 using xda premium
I had to reboot my phone before I could get Kies to connect. It drove me nuts for about half an hour before I tried that.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Make sure you are using the usb cable that came with the phone. My captivate charger does not connect to pc properly either. When I use the gs3 cable I have no issues.
Sent from my SGH-I747M using xda app-developers app
I am suffering the same thing. My S3 is rooted.... read that it's not the problem.....but I've uninstalled, reinstalled everything,
rebooted the phone - NOTHING. Still can't connect. Also tried 3 different PCs with the original cable the S3 came with.
NO LUCK.
HELP!??
bdithug said:
Make sure you are using the usb cable that came with the phone. My captivate charger does not connect to pc properly either. When I use the gs3 cable I have no issues.
Sent from my SGH-I747M using xda app-developers app
Click to expand...
Click to collapse
I had to un install Kies and reinstall and that worked for me
Sent from my SAMSUNG-SGH-I747 using xda premium
dssking said:
I am suffering the same thing. My S3 is rooted.... read that it's not the problem.....but I've uninstalled, reinstalled everything,
rebooted the phone - NOTHING. Still can't connect. Also tried 3 different PCs with the original cable the S3 came with.
NO LUCK.
HELP!??
Click to expand...
Click to collapse
I'm using the usb cable that came with the phone tried rebooting and still no luck..... Wish there was a fix for this, but it's good to know I'm not the only one having issues
Sent from my SAMSUNG-SGH-I747 using xda premium
I had to try a few different USB ports on my computer before I could get it to connect. Oddly it connected perfectly first time with Kies via WiFi (Settings -> More Settings -> Kies via WiFi) - but of course you can't update that way.
oops wrong thread...
dled1286 said:
Ok, so ive downloaded and installed the latest drivers, enabled usb debugging, allowed unsigned apps etc. but whenever i get to the point of running motochopper it gets stuck on "daemon started successfully". ive checked my model number and its the correct device to be able to root but i cant get it to go past that message. Am i missing something? Ive tried following several guides on rooting the s4 with motochopper and i always end up in the same place. Ive tried rebooting the phone and my pc several times. so i dont know what im missing
UPDATE: so i just tried it again and it says that "'adb is not recognized as an internal or exterbal command, operable program or batch file."
i get this error when i run the program as admin. If i run the .bat file normally it gives the previous error
Click to expand...
Click to collapse
for starters, post in the S4 section. i'd share a link to that but i have no idea what your model number is or who your carrier may be. cheers
however i would like to say i have tried all the troubleshooting mentioned for kies and nothing will allow it to connect to my phone
dled1286 said:
however i would like to say i have tried all the troubleshooting mentioned for kies and nothing will allow it to connect to my phone
Click to expand...
Click to collapse
again, you've given us no model number/carrier.
xBeerdroiDx said:
again, you've given us no model number/carrier.
Click to expand...
Click to collapse
My bad
I337 - AT&T
hello. please help me, I do not know who to ask. at one point, my computer does not recognize the tablet. came out inscription unknown device. I tried to connect the tablet to other computers, all to no avail. then I made a factorial reset. that is completely erased tablet, in the hope that it will solve the problem. but he also failed to recognize. What shall I do?? I tried to connect via a USB flash drive OTG. but the tablet does not see any stick. I trust only your help
sergio1231 said:
hello. please help me, I do not know who to ask. at one point, my computer does not recognize the tablet. came out inscription unknown device. I tried to connect the tablet to other computers, all to no avail. then I made a factorial reset. that is completely erased tablet, in the hope that it will solve the problem. but he also failed to recognize. What shall I do?? I tried to connect via a USB flash drive OTG. but the tablet does not see any stick. I trust only your help
Click to expand...
Click to collapse
I have the same problem. I fixed it before on my nexus 10 by trying a different kernel. Let me me know if it helps.
Sent from my Nexus 7 using XDA Premium HD app
Do you have the correct drivers installed? If so, you could uninstall and reinstall them. Also, have you tried PTP connection rather than MTP?
Sent from my XT1080 using XDA Free mobile app
Jhall8 said:
Do you have the correct drivers installed? If so, you could uninstall and reinstall them. Also, have you tried PTP connection rather than MTP?
Sent from my XT1080 using XDA Free mobile app
Click to expand...
Click to collapse
Been there done that and have always eventually been able to get it back so the computer sees the device as mtp. Wugs toolkit has always been helpful
To me. I like the step by step directions for manually updating the drivers and configuring them correctly in adb AND fastboot.
Bit I have come to an impass..........I am currently on the latest carbon nightly, with f2fs file storage for data and cache. My computer will not recognize the device in mtp and I am unable to pass files with a USB cable. I am wondering if my computer has to be compatible with f2fs, because iam sure that it is not. Will this make a difference PR should I once again uninstall and reinstall the drivers configuring them correctly?
Sent from my Nexus 7 using XDA Premium 4 mobile app
1
I'm telling you that there is no firmware on the tablet. what do you advise.
sergio1231 said:
I'm telling you that there is no firmware on the tablet. what do you advise.
Click to expand...
Click to collapse
Plug it in to a computer.
Boot into recovery if you have one
Adb devices......hopefully it shows and work from there.
Or boot into bootloader mode (after getting the twrp IMG)
Fastboot flash recovery......
Then you can side load your favorite OS
Sent from my Nexus 7 using XDA Premium 4 mobile app
aircooledbusses said:
Been there done that and have always eventually been able to get it back so the computer sees the device as mtp. Wugs toolkit has always been helpful
To me. I like the step by step directions for manually updating the drivers and configuring them correctly in adb AND fastboot.
Bit I have come to an impass..........I am currently on the latest carbon nightly, with f2fs file storage for data and cache. My computer will not recognize the device in mtp and I am unable to pass files with a USB cable. I am wondering if my computer has to be compatible with f2fs, because iam sure that it is not. Will this make a difference PR should I once again uninstall and reinstall the drivers configuring them correctly?
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
this worked for me im just passing along a possible fix http://forum.xda-developers.com/showthread.php?t=2383146&page=389 post #3888 is the one I followed and been no problems since. also cpl days before in my sdk program google had updated drivers which may or may not have played a roll. before this I could not pass files with mtp only ptp would allow my device to appear. hope it helps!
edit also should note I did device manager then android devices removed drivers in there. plugged in n7 and the adb composite interface drivers installed and that was it. if that doesn't do it make sure sdk has updated google driver which should be 10.0.0 or something don't quite remember exact #
jblaze10 said:
this worked for me im just passing along a possible fix http://forum.xda-developers.com/showthread.php?t=2383146&page=389 post #3888 is the one I followed and been no problems since. also cpl days before in my sdk program google had updated drivers which may or may not have played a roll. before this I could not pass files with mtp only ptp would allow my device to appear. hope it helps!
edit also should note I did device manager then android devices removed drivers in there. plugged in n7 and the adb composite interface drivers installed and that was it. if that doesn't do it make sure sdk has updated google driver which should be 10.0.0 or something don't quite remember exact #
Click to expand...
Click to collapse
Thanks jblaze. I've been able to function pretty well usind adb. Sort of glad cuz it forced me to learn some pretty essential stuff I have been getting along with for far too long.
Sent from my Nexus 7 using XDA Premium 4 mobile app
aircooledbusses said:
Thanks jblaze. I've been able to function pretty well usind adb. Sort of glad cuz it forced me to learn some pretty essential stuff I have been getting along with for far too long.
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ur right, I wish I knew more about it. I'm in that phase now where I'm digging thru Xda for info such as adb backups among other things. Hey no prob, take it easy.
Sent from my Nexus 7 using Tapatalk