no sd card detected by cwm recovry,,,help!! - Wildfire Q&A, Help & Troubleshooting

i am having a problem with cwm recovery not detecting my sd card....so am unable to backup my current rom or install a new one....my phone is rooted s-off radio version is 3.35.20.10 cwm recovery version 2.5.0.1
my phone is stuck at bootlogo no further going...i want to format it but after backing up the current rom so that i can later extract my contacts and sms messages...my phone has a tweaked sense rom....
when i enter the bootloader by pressing power+vol down i get this
SD Checking ...
Loading...[PC49DIAG.zip]
No Image!
Loading...[PC49DIAG.nbh]
Loading...[PC49DIAG.zip]
No image or wrong image!
Loading...[PC49IMG.zip]
No image!
Loading...[PC49IMG.nbh]
No image or wrong image!
any help would be great....!!!!

salarkhel said:
i am having a problem with cwm recovery not detecting my sd card....so am unable to backup my current rom or install a new one....my phone is rooted s-off radio version is 3.35.20.10 cwm recovery version 2.5.0.1
my phone is stuck at bootlogo no further going...i want to format it but after backing up the current rom so that i can later extract my contacts and sms messages...my phone has a tweaked sense rom....
when i enter the bootloader by pressing power+vol down i get this
SD Checking ...
Loading...[PC49DIAG.zip]
No Image!
Loading...[PC49DIAG.nbh]
Loading...[PC49DIAG.zip]
No image or wrong image!
Loading...[PC49IMG.zip]
No image!
Loading...[PC49IMG.nbh]
No image or wrong image!
any help would be great....!!!!
Click to expand...
Click to collapse
that is not a bug,you can get to recovery,just go to recovery option using volume buttons and hit the power button.
there it should read your sd card.
Sent from my Wildfire using Tapatalk 2

Wasimk32 said:
that is not a bug,you can get to recovery,just go to recovery option using volume buttons and hit the power button.
there it should read your sd card
Click to expand...
Click to collapse
exactly. And if you're curious: it's just a check if a PCIMG49 file is there containing an update (could be used e.g. for flashing splash screens or recoveries)

I can access recovery but when I try to do backup or install zip from sdcard, nothing happens except a black screen and then I've to remove the battery to restart the phone and the same happens again and again....
Sent from my Desire HD

salarkhel said:
I can access recovery but when I try to do backup or install zip from sdcard, nothing happens except a black screen and then I've to remove the battery to restart the phone and the same happens again and again....
Sent from my Desire HD
Click to expand...
Click to collapse
just an essential thing to be aware of:
After boot:
Choose menu item with vol up/down keys
Select item with power button
In clockworkmod recovery:
Choose menu item with vol up/down keys or trackball
Select item by *pressing trackball button* (power button just turns off screen here)
Swyped from my HTC Wildfire (Buzz)

My bad..... I used to hit the power button to choose items....
Sent from my Desire HD

Related

LeeDroid upgrade fail - can't get past HTC screen

I've just tried upgrading to LeeDroid 2.4.1 and have failed.
Upgrade appeared to go well until reboot, then it got stuck at the HTC screen. I have left it for 45 minutes before booting in HBOOT.
When I boot into HBOOT I get the following message:
HBOOT
SD Checking
Loading...[PB99DIAG.zip]
No Image!
Loading...[PB99DIAG.nbh]
No Image or Wrong Image!
Loading...[PB99IMG.zip]
No Image!
Loading...[PB99IMG.nbh]
No Image or Wrong Image!
If I go to recovery mode I get the red ! screen.
HBOOT details are:
BRAVO PVT1 SHIP S-ON
HBOOT-0.80.0000
MICROP-031D
TOUCH PANEL-SYNT0101
RADIO-5.09.05.30_2
Mar 29 2010,21:34:33
Phone is rooted.
Please help me recover my phone.
Try to flash a new recovery with adb:
http://www.wonderhowto.com/how-to-flash-new-recovery-image-with-adb-windows-pc-411005/
When finished, try to flash leedroid again:
Do a full wipe and flash as normal
Another idea i have is factory reset:
1.) Turn off your phone
2.) Press and hold the volume down button and then the same with the power button
3.) Wait for the screen with the 3 android images to appear, and then release the buttons
4.) Navigate with volume button to "clear storage"
5.) Enter with power-button
No warranty for any damage.
did you wipe before flashing new ROM?
I make that mistake more than often when hopping from ROM to ROM
Try it!
I have no idea about the red !
hi don't understand why you got a PB99DIAG.zip on your sdcard???
this is not the way it goes to flash a rom... just need a file called rom_whatevere.zip
pb99diag.zip is used to flash a rru rom (it s a way to do it)
put off from your phone your sd card and clean that file which seems to messed up your device and try with the right one you can find there http://forum.xda-developers.com/showthread.php?t=768703
leedroid 2.5 final release
hope this help
herb1 said:
did you wipe before flashing new ROM?
I make that mistake more than often when hopping from ROM to ROM
Try it!
I have no idea about the red !
Click to expand...
Click to collapse
Yes i always do a full wipe before flashing a rom. Unless, i just want to update my current rom. Then i would only wipe /cache and dalvik-cache. But before a full wipe, i always backup my apps and data with titanium backup. Finally, i do a complete nandroid backup, just in case.
Which "red" do you mean?
Mat... I dont think he was talking to you, hence the red thing is something topicholder was talking about.

help with clockwork recovery

Ive searched/read all related threads created and don't seem to see this issue posted.
I have a droid incredible rooted using clockwork recovery v2.5.1.2 for a long time now, all of a sudden when i boot into clockworkmod it wont let me select anything from the menu...
when you hit power button it goes to black screen, hit the power button again it goes right back into recovery menu.
simply trying to factory reset the phone to let someone else use it.
Thnx in advance for any help Dominick
The power button didn't allow you to select options in CWM, use the optical button.
If that doesn't work, you need to reflash CWM through hboot by downloading the recovery file from pvillecomp.com and renaming the file to: PB31IMG.zip
SlimSnoopOS said:
The power button didn't allow you to select options in CWM, use the optical button.
If that doesn't work, you need to reflash CWM through hboot by downloading the recovery file from pvillecomp.com and renaming the file to: PB31IMG.zip
Click to expand...
Click to collapse
tnx wow i feel stupid its been so long since ive messed with the cwm i forgot its the optical button tnx mang..

Install ZIP from SD card on CWM Recovery doesnt work

So i decided to Factory reset my Wildfire which was on CM7 and had root and S off. after the reset was done, while I was in the process of Setting up the phone (where you touch the green android and set up google account and wifi) and then guess what, It force closed. I restarted the phone but it wont start it was stuck on the cm7 boot thing (where the blue android guy is on his skateboard) and it went on and On. so i decided that i have to flash the rom again. I go into Clockwork Mod using the Volume Down + Power button. and then it hangs for a few seconds, Even if i press the volume up/down button, nothing happens. After that,this appears :-
SD checking [some file name.zip]
image not found
[same thing again]
I go onto recovery mode. and go to Install ZIP from Sd card and when i Press it, nothing comes on. all i get is a black screen. absolutely nothing is on there. what can i do? the rom is on my sd card but it doesnt seem to find it i guess. Is my phone bricked or what? help will be much appreciated.
Sorry if i have posted in the wrong section. Im new here.
thanks
Regarding the fc while setup I have no idea what happened. You say you wanted to factory reset the phone - did you also format/wipe everything and reflash CM7?
iTzSam said:
I go into Clockwork Mod using the Volume Down + Power button. and then it hangs for a few seconds, Even if i press the volume up/down button, nothing happens. After that,this appears :-
SD checking [some file name.zip]
image not found
[same thing again]
Click to expand...
Click to collapse
that's pretty normal (also the few secs pause): Fastboot checks if there's a PC49IMG.zip to flash - after that you can boot into CWM (what seems to work until there).
I go onto recovery mode. and go to Install ZIP from Sd card and when i Press it, nothing comes on. all i get is a black screen. absolutely nothing is on there. what can i do? the rom is on my sd card but it doesnt seem to find it i guess
Click to expand...
Click to collapse
don't think that the zip isn't found - guess that would end up in a error message. Probably CWM doesn't work correctly or the SD card is damaged. I'd check the SD card on the PC and would probably redownload the ROM, then, I'd check with a second SD card to make sure it's ok. If no success either try to reflash CWM (e.g. with fastboot, there are different methods - obviously doesn't work with CWM itself )
Sorry if i have posted in the wrong section. Im new here.
Click to expand...
Click to collapse
nah, fits absolutely perfect here
You are pressing the trackball aren't you??
I presume so as it seems you're getting as far as finding the zip but I'm pretty sure if you press the power button it takes you to a blank screen, its been a while since I used cwm on my willy..........
If it isn't that try flashing cwm again.
Sent from my GT-I9100 using xda premium
Scratch0805 said:
You are pressing the trackball aren't you??
Click to expand...
Click to collapse
sh*t - good point you're still right with the procedure...
So please doublecheck
iTzSam said:
I go onto recovery mode. and go to Install ZIP from Sd card and when i Press it
Click to expand...
Click to collapse
if you press the trackball at this point - not the power button - to select

[Q] help CMW not working

Hello,
I've installed cmw, but when i boot inside cmw i can move up, down, press power, but if i press power i get a blank screen (or a static screen with the icon, depending on the cmw version). there is an error too, when starting cmw, saying "pc49img.zip not found or wrong". Maybe something didn't work? What can i do? I tried flashing everything with no success. it seems root is working and i can start android, but no cmw for flash a new rom. I have the default 2.2.1.
Thank you all for the help!
EverybOdY87 said:
Hello,
I've installed cmw, but when i boot inside cmw i can move up, down, press power, but if i press power i get a blank screen (or a static screen with the icon, depending on the cmw version). !
Click to expand...
Click to collapse
in clockworkmod press the trackball to select an item instead of power
EverybOdY87 said:
there is an error too, when starting cmw, saying "pc49img.zip not found or wrong". Maybe something didn't work? What can i do? I tried flashing everything with no success
Click to expand...
Click to collapse
no worries- all good. Fastboot just checks if there's a file to flash (by fastboot itself - not clockworkmod) it's normal - nothing wrong, it's just the message that it didn't find anything to flash.
Just flash a ROM and enjoy
Swyped from my HTC Wildfire (Buzz)
Oh thanks! It works! Damn, I was using the power button for hours!
Its called CWM by the way not CMW
Sent from my Galaxy Nexus using xda premium
EverybOdY87 said:
But if I click for flashing i get only a blank screen and nothing happens! Why?
Click to expand...
Click to collapse
just to make sure (hint: you generally should be a bit more specific in your description): you mean if you
- choose Recovery from the Fastboot menu with volume keys (after Fastboot has been finnishing loading)
- hit power to select Recovery
- move to "install zip from sdcard" with volume keys inside Clockworkmod
- hit the trackball to choose "install zip from sdcard"
If you have done all that you most likely should try to reflash Clockworkmod. This should be explained in the guide you did follow.
But - wait a moment - you just mentioned that root seem to be working - how did you find out? What exactly is Fastboot showing (when you boot into Fastboot by holding Volume key down and Power)?
If you have done the process by Revolutionary it should say something like that:
Code:
-Revolutionary- (white on magenta/pink background)
BUZZ PVT SHIP S-OFF
HBOOT-6.01.1002
...

[Q] Cannot get phone into recovery

I'm having an issue getting my phone to restore. I flashed a new ROM, but it wouldn't boot up. It just sat there on a black screen for about an hour, so I pulled the battery and tried to reboot it. Now it just sits on the boot animation forever and will not boot. So I do the power + volume down to get it into recovery and that isn't working either. It goes to the right looking menu, but then it flashes really quickly something that looks like the following:
SD Checking...
Loading...[PC10DIAG.zip]
No image!
Loading...[PC10DIAG.nbh]
No image or wrong image!
Loading...[PC10IMG.zip]
No image!
Loading...[PC10IMG.nbh]
I choose Recovery and it puts me in the CWM recovery options. No matter what i choose on that menu it just goes to a black screen with the CWM logo in the middle and won't do anything. I can't get it to boot into a ROM and I can't get it to recover my last backup and I can't flash anything new. Have I bricked the phone or is there something I'm not doing right?
Do the fastboot eraseā€“w command then re flash recovery from fastboot
Sent from my SGH-T959 using xda app-developers app
It sounds like recovery is messed up, are you using trackball or power button to select?
Have you tried to fastboot flash a new recovery?
Sent from my Nexus 4 using xda premium
After following the rooting process in the wiki I had a similar problem...
SD Checking...
Loading...[PC10DIAG.zip]
No image!
Loading...[PC10DIAG.nbh]
No image or wrong image!
Loading...[PC10IMG.zip]
No image!
Loading...[PC10IMG.nbh]
I resolved this by deleting the PC10IMG.nbh image in the sdcard
w8 w8 w8 !!
Are you, by any chance , using the power button in CWM to use its features ?? ;
Cause as far as i know, at least in my Desire Z , Power button in CWM is for stand by - lock the phone,,,,,
Try using your track ball click to select the features/options in CWM !!
(+) the No image loading thing is normal in bootloader ..... it will show THAT error if you have deleted the PC10IMG from the root of your SD Card !!
PM me if the CWM features are working with the trackball ,, or if you want another solution !! (Chances are ill not follow this thread again )

Categories

Resources