Is anyone else having the problem where after a soft reset(or a manual shutdown/restart) touchflo3d doesn't autostart?
It happens to me about 50% of the times I reset, but I jus thave to switch it off again and on again and usually it works fine.
Totally different, but I have this sometimes with Touch Flo 2D on my TyTn II. I usually get it if I've installed to much, It always launches if I haven't got the Micro SD card in though.
I've had this happening to me since I got it, and after a few hard resets it still happens... Seemingly at an increasing frequency too.
Yup, I'm experiencing the same problem.
It's really annoying, and more people are having this issue.
There's already a thread about this.
What works for me most of the time is this:
- Disable TF3D in settings.
- Soft reset device with power button
- Enable TF3D again
- Sometimes TF3D starts now, but if not reset again.
I can't wait for a more stable and fast cooked rom
Hope this helps
Oh Sorry, I couldn't find the other thread. I just keep resetting and hopee it randomly decides to starts. Love this phone, just a few things that really annoy me
The inability to find a way to make it autolock(not standby) after X seconds for example. If anyone can help with that, I'd greatly appreciate it.
aiaob said:
Oh Sorry, I couldn't find the other thread. I just keep resetting and hopee it randomly decides to starts. Love this phone, just a few things that really annoy me
The inability to find a way to make it autolock(not standby) after X seconds for example. If anyone can help with that, I'd greatly appreciate it.
Click to expand...
Click to collapse
DId you install any apps?
These kind of problems are mostly caused when 2 programs interfere with eachother. Teh reason why one time it does start up and the other time it doesn't is the sequence of programs starting up. Most of the time touch flow 3d will start later (because it's so big)
i have had this happen a couple of times as well.
quarintus said:
DId you install any apps?
These kind of problems are mostly caused when 2 programs interfere with eachother. Teh reason why one time it does start up and the other time it doesn't is the sequence of programs starting up. Most of the time touch flow 3d will start later (because it's so big)
Click to expand...
Click to collapse
I doubt it's caused by that. I've hard reset it installed core and tomtoma nd had it happen..
and I'm sure it's not just slow to start up, I've tried making calls and simply leaving it for 10 minutes and it still doesnt start up.
It only started haooening to me after I instaled software.
I guess the best thing to do right now, is to install all software with touchflo disabled, then reboot completly the device to finalize the instaltion, and then reboot it again. Now you can reactivate Touchflo again.
This "trick" has worked perfectly on my Pro 2
HastaSSSS
disable startup
Many programs that you install will leave a startup file in the windows\startup directory. Try cutting and pasting them to some temporary directory. I did that with poutlook and slovoed and the problem has gone away for me, without in any way impairing my calendar/contacts or slovoed functioning.
I got the same problem too.. soft resetting a few times do it or disable/re-enable on Personal-Today Items screen
Kinda annoying
Same problem here. Spoke to HTC today and tol them there were more people having this problem. Mine is so serious that it won't start at all! HTC says I was the first and ONLY one in the world with this problem. They told me that if there were more people having this issue they should CALL HTC. It's free to call them... please do so in finding a solution!
Thanks!
I am suffering under the same issue! It is really annoying! HTC should immediately sovle this problem!
Sounds a bit like my thread here: http://forum.xda-developers.com/showthread.php?p=3950507
I copied manila.exe from windows to my start-up folder, now it works fine.
yeah i have the same problem its really annoying. it works about 90% of the time now when i copied the manilla.exe to start up folder. before that i tried to put the phone in airplane mode before booting but that worked like half of the time.
Schijthoos said:
I copied manila.exe from windows to my start-up folder, now it works fine.
Click to expand...
Click to collapse
Does the time on the tf3d homescreen update ok when you use the manila.exe shortcut?
touch flor not loading
My phone is hanging again. I can't get it to load Touch Flo 3D. I get this message that it's trying to activate handsfree network and then it says connected and reboots and goes through the same thing 2 or 3 times. I hard reset back in Dec cause of this and then the same thing happened again about a month ago and out of the blue it loaded touch flo and fixed itself.
But this time it's been a couple days and my phone is so slow it's crazy. It's been trying to remove one program for 20 minutes. I thought removing a few programs might help instead of doing another hard reset but it looks like i'm gonna have to do one more.. I haven't added anything new lately. And I even got a message saying your phone can not boot up because of a program from an untrusted source or something else and it wants me to hard reset. It says press volume up to reset or any key to continue and then it goes to that hands activation screen.
Iv'e tried enableing and disabling bluetooth. Sprint store said I have a bad phone cause of that hands free actication message I keep getting and they want to order me aother phone but it's going to be a refurb so I guess i'll hard reset.. Something is causeing it to hang and not load and I don't know what it is.. But I came here and I tired puttingmy phone in airplane mode and rebooted nothng. I have unchecked and checked touch flo and rebooted..
But I went to windows and saw manilla.exe cause you guys said copy it to start up and I clicked on it and I saw my background and clock again but I don't think Touch Flo fully loaded and my task manager wasn't at the top and I ran clean ram cause it was still slow and it said it freed up 32mb but then my screen went black again. I put it in airplane mode once more and took out the battery. But when I never pasted the manila to start up should I do that? I just clicked on it and saw where my clock and background were back but my clock was off by like 15-20 minutes.. I'm sure I'll probablyt have to hard reset but wanted to ask around a couple more times before doing one.. Rose
I was sitting in my den and my friend said he texted me but I didn't get it. I went to check my phone and it seemed ok but no text. I then went to make a phone call and it hung. I went to turn it to airplane mode and it froze. When I restarted it, now I get the black screen with the top and bottom menu bar but no touchflo 3d loading. I get some weird hands free activation message and then it says successful and reboots my phone. When the phone starts back up it is in the same condition without touchflo 3d and the reboot loop continues unless I click cancel.
If I run manilla.exe it will boot up and my today screen will come back but it is SLOW and it doesn't seem to have completely loaded.
WTF happened and how do I fix this?
Same thing happened to me.. Touchflo wouldn't load phone was so slow hands free message kept coming and saying connected and rebooting. I did a hard reset and was good for a couple months then out of the blue on day it did it again. I turned off phone and left battery off overnight and just got lucky and the next day as I was getting in my car it came back on.
But then a few weeks later it did it again and I took it to a Sprint store. I was told that the handsfree activation is something that only happens once when you 1st get a new phone and they said my phone was defective. They were going to order me another one but it was going to be refurbed so I never picked up and just dealt with a hard reset once again. Don't know what causes this but I've had my phone reset for over a week and I just now tonight started putting apps back on cause I was afraid ut had to do with something I installed I really don't know what causes it.. But my touchflo wouldn't load at all compeltely black screen no today screen at all and boy was my phone slow. I went to windows and clicked on manilla.exe also and saw my today screen but it was still slow and not completely loading up to touchflo like you said. And then I read about putting it in airplane mode turning off BT nothing worked for me this last time so I did a heard reset again..
Maybe someone else knows what causes this but I'm leary and am not going to put everything back on my phone that was on there but I've put most everything back.. Sorry I wasn't much help but same thing for me hands free siad connected and would reboot and over and over.. I kind of want an Android phone now and I don't think Sprint should of offered me a refurb when I just bought this in Sept and it's an expensive phone. But oh well things happen.. Good Luck!
killerz298 said:
I was sitting in my den and my friend said he texted me but I didn't get it. I went to check my phone and it seemed ok but no text. I then went to make a phone call and it hung. I went to turn it to airplane mode and it froze. When I restarted it, now I get the black screen with the top and bottom menu bar but no touchflo 3d loading. I get some weird hands free activation message and then it says successful and reboots my phone. When the phone starts back up it is in the same condition without touchflo 3d and the reboot loop continues unless I click cancel.
If I run manilla.exe it will boot up and my today screen will come back but it is SLOW and it doesn't seem to have completely loaded.
WTF happened and how do I fix this?
Click to expand...
Click to collapse
I am currently experiencing a few problems with my TP2. It all started when I went to a friends house and the phone started roaming and I did a soft reset.
-Ever since then TouchFlo 3D will not launch.
-The device is extremely slow.
- "Fennecfaststart.exe" cannot be opened. Either it is not signed with a trusted certificated.....(I think I had this error before everything happened)
I had this same issue when I went to my friends house but I after the night TouchFlo 3D was up and running by morning and the phone was normal but this time that didnt happen. I left the phone off for about 2-3 weeks and still the issue is still there.
I was getting a error where it told me the device was properly shut off and I have to do a hard reset or I can push any other key to cancel and I would cancel everytime it happened about 5 times but that message stop popping up.
So does anyone know what I can do to fix this ? The old 700wx im using isnt that great lol.
Thanks in advance
__________________
I had something similar I just hard reset and reinstalled my programs from scratch...didn't take very long, and I was smart enough to save all contacts to SIM
So, I was driving along using Google Maps & my phone started going haywire - giving errors like, "android.phone is not responding" with the only option being force close. It was in an endless loop & I couldn't power down. I yanked the battery & when the phone came back, it had done a factory reset - it welcomed me to the phone, all my apps are gone, everything's no longer set up.....
I never did get around to doing a backup - wasn't even sure if the whole "nandroid backup" scene worked with this phone & hadn't figured it out yet.....
Am I boned? Any ideas on what I could possibly do to fake it out into loading back up with all my "stuff"? Seems crazy that everything would wipe in an instant like that - seems like it's all got to be there somewhere........ The only T-Mobile store listed near me is a radio shack & I don't have much hope that they'd be able to help.......
Thanks in advance!!
never mind...
I decided it'd be easier to just reinstall everything than to try to figure out how to get back to where I was - wasn't as bad as I was fearing. I wonder if I've got some bad memory - when I connected via USB to my PC, it tells me there's some issues on the storage & suggests I do a "scan & fix".........
Thank god my phone didn't delete all my apps but it did delete and reset all my shortcuts to the default.
All my apps were still there and my wallpaper image was still there but all the shortcuts were there exactly like when I got the phone. I have no idea what the hell happened.
this happened to me too, i was super pissed...i had really important info in texts and they all went bye bye. only happened once about a week or 2 ago and i'm crossing my fingers it never happens again
plus i have to beat angry birds all over!!!
Hi everybody... I've been using my HTC One X happily for going on 3 months now, and just out of the blue I had the weirdest thing happen. I was just cruising the internet when I lost my WIFI connection, so I go into settings to see what happened and it just says not in range(it was defiantly in range), so then I turned WIFI off, and back on and nothing. So I did a restart. It got worse. The WIFI kept saying connecting, authorizing, searching, connecting, authorizing, searching, continuously never actually connecting. So I tried restarting again. Now, the WIFI works right, but everything else is completely screwed up. I was running APEX launcher, and widget locker, and APEX launcher keeps closing randomly, so i thought well something got messed up there when i restarted so i took it off and re-installed. Nope. Still does it, so then i just took it off and its still having issues. Every time I exit an app or hit home, I get a loading thing and it takes forever to go to the home screen. I tried doing a factory reset and it won't go to the boot menu. It just starts up and then says its recovered from an error and asks if i'd like to send an error report. What the heck is going on with my phone? It's not even hardly usable the way its acting and I can't even reset the stupid thing.
a little more info about your configuration may be helpful. Is your one x stock with a locked bootloader or are you running a custom rom?
Sounds like corrupt data somewhere.
If a factory reset doesn't solve it, try flashing the RUU.
turn your router off and back on, mine did this with a Sky router at my friends house. Worked fine after.
I dropped my one x and the screen shattered but the phone was still usable, after a few days i noticed out of the blue all the apps would crash giving the error 'Unfortunately, the process (every app i open) has stopped working' so i was unable to open anything, if i restart the phone it will either get stuck in a boot look or will not turn on at all, sometime it turns on if i put the power in. I have factory reset the phone many times and that gives me an hours use with it before it happens again. I have sent the phone away for repair they have managed to fix the screen but still has the same crashing problems and they are struggling to find a fault. It is not routed and running on the latest jelly bean. Please help im going out of my mind, what could be causing this hardware or software???
im not guessing.....hardware and software. probably something broke on the mainboard (memory or such) so the rom cant load stuff from the memory and start crashing. definitly a warranty story here. send it back again. unlocking and trying to fix it here is a no go because you will loose the warranty that you still have now !!!