[Q] LTE speeds on Cyanogenmod 10 - AT&T, Rogers, Bell, Telus Samsung Galaxy S III

I have a Rogers Galaxy S3 and I installed the latest CyanogenMod 10 and I'm just wondering if it is possible to get LTE speeds on my device because everytime I switch the network settings under LTE I lose data connection besides that everything is perfect and I can get HSPA+ speed, wich is ok but not what I'm paying for and I would love to get those speeds back.
Found the answer -____-
http://forum.xda-developers.com/showthread.php?t=1732633

Is your apn set up correctly
Sent from my SGH-I747 using Tapatalk 2

What do typical LTE speeds look like? (I never had data until I got my S3)
I have a Telus SGS3 running CM10 M1. At the moment I got 25mbps down and 18mbps up with the speedtest app. My signal indicator says 4g and the speedtest app says my connection is LTE.

corythug said:
Is your apn set up correctly
Sent from my SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
Just finished installing the AT&T version of the CM10 M1 update and I still can't get LTE to work 4G does not show up and still have same problem of not getting data connection when selecting LTE as connection. What are the correct APN settings for Rogers so that I am able to get LTE?? :/

Not sure off hand, Google Rogers lte apn
Sent from my SGH-I747 using Tapatalk 2

lte on at&t galaxy s3 running cyanogenmod 10
does LTE work properly on at&t's galaxy s3 running cyanogenmod 10?

galaxykid said:
does LTE work properly on at&t's galaxy s3 running cyanogenmod 10?
Click to expand...
Click to collapse
Of course.
Sent from my Motorola DynaTAC 8000X

galaxykid said:
does LTE work properly on at&t's galaxy s3 running cyanogenmod 10?
Click to expand...
Click to collapse
+1?

Yep
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

I'm with rogers too. We'll my phone is. Anyhoo in order to get lte speeds with cm10 or aokp for that matter you have to put in that code looks like *#*#3896#*#* I'm not sure about the number though look around you'll find it, and then select lte, gsm. That's after putting in the right apn settings of course. Btw it'll work but it won't stick you'll have to do it again every time you restart your phone. Personally I can't be bothered that's why I stick with stock until they figure that out.
Sent from my SGH-I747M using xda premium

mrnovanova said:
I'm with rogers too. We'll my phone is. Anyhoo in order to get lte speeds with cm10 or aokp for that matter you have to put in that code looks like *#*#3896#*#* I'm not sure about the number though look around you'll find it, and then select lte, gsm. That's after putting in the right apn settings of course. Btw it'll work but it won't stick you'll have to do it again every time you restart your phone. Personally I can't be bothered that's why I stick with stock until they figure that out.
Sent from my SGH-I747M using xda premium
Click to expand...
Click to collapse
No need for all that. In latest CM10 all you have to do is change preferred network type to LTE/GSM/WCDMA, choose Rogers LTE apn and u get LTE speed. It will show 4G but if you do a speedtest you'll see the difference. And it sticks on reboot. In AOKP though it doesn't stick.

tonymtl said:
No need for all that. In latest CM10 all you have to do is change preferred network type to LTE/GSM/WCDMA, choose Rogers LTE apn and u get LTE speed. It will show 4G but if you do a speedtest you'll see the difference. And it sticks on reboot. In AOKP though it doesn't stick.
Click to expand...
Click to collapse
^THIS!
for the longest time i couldnt figure out why i didnt see the LTE symbol. When you flash to cm10 the LTE symbol is now 4g.

This should be stickied until cm10 fixes the issue. Every Canadian user flashing to cm10 has no lte by default. Thank you for fixing mine
Sent from my SGH-I747 using xda app-developers app

tonymtl said:
No need for all that. In latest CM10 all you have to do is change preferred network type to LTE/GSM/WCDMA, choose Rogers LTE apn and u get LTE speed. It will show 4G but if you do a speedtest you'll see the difference. And it sticks on reboot. In AOKP though it doesn't stick.
Click to expand...
Click to collapse
tonymtl said:
In AOKP though it doesn't stick.
Click to expand...
Click to collapse
OMFG, thank you for clarifying that. I thought I was going insane.

Still No LTE (AT&T)
I live in an LTE area, receive it with stock rom, but only showing H+ for speed. I have validated that the mobile networks is set to LTE /GSM/WCDMA - not sure what I may be missing. I love CM10, but really wish I could get this figured out. On AT&T.
Anyone help out? Is there some information I could provide?

I am unable to toggle off lte on cm10 to save some battery life. Is there something I'm missing?

msherman123 said:
I live in an LTE area, receive it with stock rom, but only showing H+ for speed. I have validated that the mobile networks is set to LTE /GSM/WCDMA - not sure what I may be missing. I love CM10, but really wish I could get this figured out. On AT&T.
Anyone help out? Is there some information I could provide?
Click to expand...
Click to collapse
Looks like it is working now. I get 4G in the LTE area and H+ everywhere else. The data speeds are decent, so not going to worry about it.

Related

3G/4G Menu

Where is the hidden menu for the 4g preferred setting? Isn't there a hidden setting menu. My phone tried to stay on edge. My little brother has a blaze and is right next to me and his is on 4g and mine is on edge....
I still have IMEI so that isnt the issue. :good:
go to the play market and download phone info
Should it be set to gsm/cdma auto(Prl)?
It was on gsm auto (Prl).
It seems since I flashed a Rom and then did my Nan restore to stock rooted it preferred edge over 4g.
Sent from my SGH-T999
no if you want it to prefer 4g ovr edge then you have to have it set to wcdma preferred. that's tmobile's 4g! and then when it isn't available it will simply go to edge. that's definitely your best bet.
pedroisweird said:
no if you want it to prefer 4g ovr edge then you have to have it set to wcdma preferred. that's tmobile's 4g! and then when it isn't available it will simply go to edge. that's definitely your best bet.
Click to expand...
Click to collapse
I did that now. It still was sticking on edge. I then switched it to wcdma only and it switched right to 4g. Thing is on edge it had full bars. 4g only two. I wonder if that's why it stayed on edge. Anyone know?
Sent from my SGH-T999
*#*#4636#*#*
Sent from my SGH-T999 using xda premium
So I'm visiting family in Toms River NJ and I have full bars of Edge service, but no 4G service. Should I try switching network settings or what ??
Sent from my SGH-T999 using xda premium
dmarco said:
So I'm visiting family in Toms River NJ and I have full bars of Edge service, but no 4G service. Should I try switching network settings or what ??
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
try wcdma preferred. It helps stay on 4g. There may not be 4g where you are. Might want to check on that.
Sent from my SGH-T999
jjlean said:
try wcdma preferred. It helps stay on 4g. There may not be 4g where you are. Might want to check on that.
Sent from my SGH-T999
Click to expand...
Click to collapse
So I did this same thing and it's telling me I'm on 3G.
When I was on completely stock ROM out of the box, I was on "4G" all the time.
Now, every ROM I've flashed to test out which one I like, it displays 3G BUT whenever I click on a link it switches to H+. Then when that link is done loading it switches back to displaying 3G. Am I correct in assuming that it is supposed to do this?
Edit - After reading the NEXT post while I was doing my search, it seems that I was correct. :]
B-Roll said:
So I did this same thing and it's telling me I'm on 3G.
When I was on completely stock ROM out of the box, I was on "4G" all the time.
Now, every ROM I've flashed to test out which one I like, it displays 3G BUT whenever I click on a link it switches to H+. Then when that link is done loading it switches back to displaying 3G. Am I correct in assuming that it is supposed to do this?
Click to expand...
Click to collapse
correct you are. while It's accessing data it goes to H+
I have my set to wcdma preferred. Keep in mind this setting might use more battery because it's constantly looking for four g signal rather than two g or three g
Sent from my SGH-T999 using xda app-developers app
If I'm not mistaken, on stock it will always show 4G, even on 3G.
A lot of custom roms change this so it tells the truth. That's why you see 3G or H/H+.
Sent from my SGH-T999 using xda app-developers app
There's an app in play store called network that works great.
t-mobile sgs3 stock rom/rooted

Bell Not Getting LTE

I am in a lte area and not getting lte coverage anyone else in bell with this problem? It just says H on the top, and cm10 rom
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Hi there, please go to bell.ca/support and search apn settings, you will probably need to add Bells LTE settings to your phone.
Sent from my SGH-I747M using xda app-developers app
tehsprayer said:
I am in a lte area and not getting lte coverage anyone else in bell with this problem? It just says H on the top, and cm10 rom
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
Are you inside a building? Bell's LTE penetration is....enough said.
Did you get LTE with stock rom? If so it could be a setting in the rom somewhere. I also have troubles with LTE when in a building (if thats the case)
I've been outside a building and still don't get lte in the kitchener Guelph area where lte is supported I also changed the settings to gsm/lte but still never see 4G on the top
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
tehsprayer said:
I've been outside a building and still don't get lte in the kitchener Guelph area where lte is supported I also changed the settings to gsm/lte but still never see 4G on the top
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
I'm on Rogers in the mississauga / Toronto region and I have the same problem.
Setting gsm/auto/lte doesn't work
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Just got the confirmation yesterday that Bell have issue with their LTE network.
Go on your network setting and select WCDMA ONLY if you are able...
This is what the tech told me for my LG and since yesterday got 1 drop connection and not 10 a day!!!
tehsprayer said:
I am in a lte area and not getting lte coverage anyone else in bell with this problem? It just says H on the top, and cm10 rom
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
I'm on Virgin Mobile Canada (Bell) and was having issues getting 4G (LTE). I believe it was posted on the CM10 thread but I reposted this as someone else was asking the same thing, but if you can't get 4G working even with the correct APN, go to your dialer and dial *#*#4636#*#*
This will take you to the phone testing menu. Tap Phone information, scroll down to the selectable list which may say CDMA or GSM/CDMA. Change that to LTE/GSM or LTE/GSM/CDMA and that should get it working again.
This worked for me on CM10, but AOKP should be close enough that this may help you out.
I'm on Att but the 9-8 build of aokp defaults to wcdma preferred on boot up..I know I live in an LTE area so what I did was *#*#4636#*#* then choose LTE only to force it into LTE coverage after that choose LTE/GSM/CDMA prl auto then or LTE should stick..for me if I chose LTE/GSM/CDMA first it would still default to wcdma...hope this helps...keep in mind you have to perform this after every reboot until its changed by task if it ever is in future builds.
Sent from my SGH-I747 using XDA Premium HD app
djkinetic said:
I'm on Att but the 9-8 build of aokp defaults to wcdma preferred on boot up..I know I live in an LTE area so what I did was *#*#4636#*#* then choose LTE only to force it into LTE coverage after that choose LTE/GSM/CDMA prl auto then or LTE should stick..for me if I chose LTE/GSM/CDMA first it would still default to wcdma...hope this helps...keep in mind you have to perform this after every reboot until its changed by task if it ever is in future builds.
Sent from my SGH-I747 using XDA Premium HD app
Click to expand...
Click to collapse
Hmmm, that's interesting. On CM10, I don't need to change that on every reboot. Not even after a dirty flash. Just after a clean flash.
I had the same problem on rogers in Vancouver also running cm10 make sure you change your APN to the lte version also where it says APN type I put default. Another thing that may confuse you is that there is no lte icon on cm10 it says 4g instead
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
---------- Post added at 02:48 PM ---------- Previous post was at 02:46 PM ----------
Also what might help is don't keep to many APN stored delete all except the lte and the lte tethering one. My phone was also switching to the regular APN on booting it up
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
djchrissca said:
Just got the confirmation yesterday that Bell have issue with their LTE network.
Go on your network setting and select WCDMA ONLY if you are able...
This is what the tech told me for my LG and since yesterday got 1 drop connection and not 10 a day!!!
Click to expand...
Click to collapse
Where did you get this confirmation?
Not getting LTE? Check your APN Settings
Hi Guys, if you are having issues with your LTE, check your APN Settings here...http://forum.xda-developers.com/showthread.php?t=1434995

I can only access H+ and not LTE

I recently got a LTE sim card, and an LTE data plan with Fido. 4G worked for about 5 seconds (I even did a speed test) and then now it's permanently on H+.
APN is set to LTEmobile.APN but when I change to Network Mode LTE/GSM, my signal goes blank and stays like that until I go back to GSM/WCDMA, which doesn't make any sense.
I'm using Task's 10/28 Build, which is the only build that doesn't have black screen unlock.
I tried updating to his latest 4.2 but LTE still didn't work.
Any ideas on what is wrong?
Sepharite said:
I recently got a LTE sim card, and an LTE data plan with Fido. 4G worked for about 5 seconds (I even did a speed test) and then now it's permanently on H+.
APN is set to LTEmobile.APN but when I change to Network Mode LTE/GSM, my signal goes blank and stays like that until I go back to GSM/WCDMA, which doesn't make any sense.
I'm using Task's 10/28 Build, which is the only build that doesn't have black screen unlock.
I tried updating to his latest 4.2 but LTE still didn't work.
Any ideas on what is wrong?
Click to expand...
Click to collapse
Please invest $10 and get a LTE sim card from FIDO it will work with LTE sim card.
ysr84 said:
Please invest $10 and get a LTE sim card from FIDO it will work with LTE sim card.
Click to expand...
Click to collapse
did you not read what he said? He has an LTE sim card. To the OP try a google search and see if there are any different apn's. Its not rom related because task650 gets LTE speeds with his rom. Or if your phone is unlocked and you know someone else that has the same phone or LTE sim card pop it in and try it out
Sent from my SGH-I747M using xda premium
I'm suffering the same problem on rogers. Going to flash back to stock rooted to fix the problem, then try again. I'll do this tomorrow as its getting late.
Sent from my Nexus 7 using xda app-developers app
Download LTE on/off from the play store and switch to lte only, I'm on fido and I had the same problem
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
pjcordi said:
Download LTE on/off from the play store and switch to lte only, I'm on fido and I had the same problem
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Tried it but didn't connect to lte.
Sent from my Nexus 7 using xda app-developers app
Some ROMs have incorrect Fido/Rogers APN settings; I'd go over what's in the ltemobile.apn settings and compare it to a known good set (such as the ones in the stock ROM).
Soft bricked my phone by going back to rooted stock ROM through Odin. Guessing I should have formated system. Anyways fixed it up. Got lte working on rooted stock. Then when to miui no lte. Read that lte is a problem with many on this ROM so I lose. Hope I can get it working eventually when off stock.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
onei0077 said:
Soft bricked my phone by going back to rooted stock ROM through Odin. Guessing I should have formated system. Anyways fixed it up. Got lte working on rooted stock. Then when to miui no lte. Read that lte is a problem with many on this ROM so I lose. Hope I can get it working eventually when off stock.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Carriers use different labels for H+/LTE - ROMs differ in how they interpret the actual signal speed.
Some ROMs accurately reflect the network speed, some don't.
Some carriers promote/sell speeds that they cannot provide in every area.
There are many possible explanations as to why you are experiencing this.
You should provide your ROM, carrier, APN settings, network speedtest results, etc. for more in-depth answers.

[Q] LTE = H+ for I9505 roms?

I was wondering if the H+ symbol I get for the Omega rom means it is LTE? There are times when it says E, 3G and 4G as well. I'm assuming the H+ is when it is on LTE here in Chicago.
rbtady said:
I was wondering if the H+ symbol I get for the Omega rom means it is LTE? There are times when it says E, 3G and 4G as well. I'm assuming the H+ is when it is on LTE here in Chicago.
Click to expand...
Click to collapse
4g is lte h+ is hspa
cwalker0906 said:
4g is lte h+ is hspa
Click to expand...
Click to collapse
Thanks for clearing that up
Sent from my GT-I9505 using xda app-developers app
I Would like to add, on TMO rom it seemed to me like they are marking H+ as 4G as well, which on normal roms (i9505) they are not.
i had 2 Galaxy S4 in my hand, one with TMO rom and one with i9505 rom. (With TMO sim in both)
the TMO showed up 4G and the i9505 showed H+
but when looking inside the debug menu, they both were in H+ channel,
speedtest showed the same speed as well.
so what i think is that TMO is "Cheating" by stating "i'm on 4G network" which should be only LTE,
but you are on 3.5G network (H+)
cwalker0906 said:
4g is lte h+ is hspa
Click to expand...
Click to collapse
So why does it go between 4g and 4gLTE?
Sent from my SGH-M919 using xda premium
you could also correct that by just changing the build.prop lines to the tmobile values and you get your normal icons back for 4G and 4GLTE. I did this since I am running Omega as well.
dominante58 said:
you could also correct that by just changing the build.prop lines to the tmobile values and you get your normal icons back for 4G and 4GLTE. I did this since I am running Omega as well.
Click to expand...
Click to collapse
Would this work on an AOSP rom as well ? If so, can please you post the build.prop lines that need changing? (including what to change them to)
Thanks in advance
C.Sweat said:
Would this work on an AOSP rom as well ? If so, can please you post the build.prop lines that need changing? (including what to change them to)
Thanks in advance
Click to expand...
Click to collapse
I honestly do not know that this will work on an AOSP rom. My bet is that they probably wouldn't- and if you're running an AOSP rom built for the M919 you'd already have the correct build.prop values:
ro.product.model= SGH-M919
ro.product.name=jfltetmo
ro.product.device=jfltetmo
dominante58 said:
I honestly do not know that this will work on an AOSP rom. My bet is that they probably wouldn't- and if you're running an AOSP rom built for the M919 you'd already have the correct build.prop values:
ro.product.model= SGH-M919
ro.product.name=jfltetmo
ro.product.device=jfltetmo
Click to expand...
Click to collapse
I see. Those are the current values for those lines. Thanks anyway
Why don't you just do a speed test?
dominante58 said:
you could also correct that by just changing the build.prop lines to the tmobile values and you get your normal icons back for 4G and 4GLTE. I did this since I am running Omega as well.
Click to expand...
Click to collapse
How do you change the build prop? Also, will this effect the changes I made with 3 minit settings?
I'm on omega. Change your build prop to get T-Mobile icons. You could also go in settings/status and check if your in hspa or LTE. I have LTE now in Cleveland and see 4g LTE for my data icons
Sent from my SGH-M919 using xda premium
Here's T-Mobile build prop. There are only 3 things you have to change. Device,model and name
Sent from my SGH-M919 using xda premium
___
rbtady said:
How do you change the build prop? Also, will this effect the changes I made with 3 minit settings?
Click to expand...
Click to collapse
A simple text editor works, it's located at /build.prop
Otherwise there are several options on Play, just search for build prop.
Thanks i changed the name, model, and device in build prop, but it still uses 3g and 4g.
Nevermind it now. Shows lte for lte and 4g for hspa after the edit of the build prop
Sent from my SGH-M919 using xda app-developers app
DxCx said:
I Would like to add, on TMO rom it seemed to me like they are marking H+ as 4G as well, which on normal roms (i9505) they are not.
i had 2 Galaxy S4 in my hand, one with TMO rom and one with i9505 rom. (With TMO sim in both)
the TMO showed up 4G and the i9505 showed H+
but when looking inside the debug menu, they both were in H+ channel,
speedtest showed the same speed as well.
so what i think is that TMO is "Cheating" by stating "i'm on 4G network" which should be only LTE,
but you are on 3.5G network (H+)
Click to expand...
Click to collapse
Tmobile's 4g has always been hspa+ They are just starting to roll out LTE. AT&T did this also. They billed hspa+ as 4g, and then rolled out LTE later, which they currently market to compete with verizons 4g lte. Gsm carriers were able to debut hspa+ faster then verizon was able to debut LTE for the first time, giving them a leg up on the fastest network for a short time.
Sent from my SGH-M919 using Tapatalk 4 Beta

TMO rom /w LTE support

I'm in a real pickle. I have a AT&T (I747) S3 that's capable of LTE. I've flashed several T-mobile rom's on it and everything seems to work except I don't get an option to choose LTE in the Mobile Networks. I assume this is because T999 did not have LTE but T999L did.
Are there any roms that are touchwiz (I need wifi calling) and also support LTE?
Thanks folks!
Um... Why haven't you tried at&t ROMs if you don't have a t999* device anyway?
Sent from my SGH-T999 using Tapatalk
Because AT&T roms don't have Wifi-Calling feature. I should have clarified T-Mobile is my carrier.
I was able to figure this out. I downloaded this 4.3 Stock deoxed ROM for T999L and I was able to get everything working. Now onto theming it like an S5. Unfortunately majority of the custom roms out are for the T999 and don't support LTE. http://click.xda-developers.com/api/click?format=go&jsonp=vglnk_jsonp_14033932361886&key=f0a7f91912ae2b52e0700f73990eb321&libId=e2cc1c90-f9dd-49fc-b098-d6b1401acb32&loc=http%3A%2F%2Fforum.xda-developers.com%2Fshowthread.php%3Ft%3D2561670%26page%3D7&v=1&out=http%3A%2F%2Fwww.androidfilehost.com%2F%3Ffid%3D23252070760975307&ref=http%3A%2F%2Fforum.xda-developers.com%2Fshowthread.php%3Ft%3D2561670%26page%3D8&title=4.3%20Update%20for%20T999L%20now%20live%20-%20Page%207%20-%20xda-developers&txt=%3Cfont%20color%3D%22Blue%22%3ET999L_4.3_UVUBMK4_deodexed_KnoxFREE.zip%3C%2Ffont%3E
tokenpoke said:
Um... Why haven't you tried at&t ROMs if you don't have a t999* device anyway?
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Well then, that makes a huge difference, lol.
Sent from my SGH-T999 using Tapatalk
T999 ROMs do support LTE, but you won't see the option for it, as long as you select auto it will connect to it
Sent from my SGH-M919 using Tapatalk
Huh I'll look into that then! Thanks!
Rishi
serio22 said:
T999 ROMs do support LTE, but you won't see the option for it, as long as you select auto it will connect to it
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
I still can't seem to get LTE on this AT&T S3 (/w AWS enabled). In the same area I'm able to pickup LTE on another AT&T S4 (/w AWS enabled). I'm able to pick up Edge and HSPA+ on both.
UPDATE: I was able to connect to LTE but I had to force the phone to use LTE Band 4 using *#BAND#. I was not able to make any calls at this point since it was the modem was running LTE only.
I then moved the modem to Automatic and the LTE remained and I was able to make some calls but on ending them, it went straight to Edge instead of HSPA+ or LTE.
The switch over between Edge to HSPA+ / LTE doesn't seem as smooth as the S4 and sometimes it just doesn't switch and sticks to Edge.
Ideas?
People have been trying to do this for a while and it is something I believe just isnt going to work. The I747 was built to use a specific set of frequencies on AT&T networks. T-Mobile uses different frequencies/bands and the I747 simply cannot make proper use of them. There's threads in AT&T forums about this. You should check them out.
I used an I747 before with T999 ROMs and had no problems connecting to LTE once I used the correct APN, can you please state what APN you are using?
Sent from my SGH-M919 using Tapatalk
Ok, I have realized that this is an error caused by the AWS patch going away when I reboot. I thought this wasn't supposed to happen with I747 and only with i747M's but it seems like it's happening to my unit.
Once I have the AWS patch on, it goes quickly from E - > 4G (HSPA+ - > LTE (when available). When the HSPA+ is only available, it has a much harder time moving from E-> LTE directly.
serio22 said:
I used an I747 before with T999 ROMs and had no problems connecting to LTE once I used the correct APN, can you please state what APN you are using?
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
Oh I didn't realize you were using the patch.. Well my area is refarmed for 1900 hspa+ so I didn't have to use any patches, once I put in the LTE APN it quickly picked up LTE and everything was good
Sent from my SGH-M919 using Tapatalk

Categories

Resources