Sent from my SAMSUNG-SGH-I747 using XDA Premium HD app
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
I'm using the ones from Tasks post but with the bottom two at 775 and 750 and everything at or above 1890 bumped 25mhz.
Sent from my SGH-I747 using xda premium
I just took the stock values and bumped everything down by 125 mV.
Running Parinoid Android v2.1 with Ktoonsez's KT747 9/10 Jelly Bean kernel
I/O Scheduler = noop
Governor = ktoonservative
Mhz ______ mV _____ Difference from stock
1512______1075_____ -125
1458______1050_____ -135
1404______1040_____ -145
1350______1025_____ -150
1296______1015_____ -160
1242______1000_____ -150
1188______0985_____ -165
1134______0970_____ -155
1080______0955_____ -170
1026______0925_____ -150
0972______0910_____ -165
0918______0900_____ -150
0864______0890_____ -160
0810______0875_____ -150
0756______0855_____ -170
0702______0825_____ -150
0648______0815_____ -160
0594______0800_____ -150
0540______0785_____ -165
0486______0775_____ -150
0384______0770_____ -155
0192______0755_____ -170
0144______0745_____ -180
0096______0745_____ -180
how come if i try to bring all down 100mV my phone restarts itself all the time.. and the values wont stay at where i wanted it to be.
khunfused said:
how come if i try to bring all down 100mV my phone restarts itself all the time.. and the values wont stay at where i wanted it to be.
Click to expand...
Click to collapse
What kernel and app are you using to undervolt?
Also not all phones(chips) are built the same, while one phone maybe able to run -200mV yours may only be able to handle -75mV.
endlessevo said:
What kernel and app are you using to undervolt?
Also not all phones(chips) are built the same, while one phone maybe able to run -200mV yours may only be able to handle -75mV.
Click to expand...
Click to collapse
kt747
using ktweaker.
phone keeps resetting itself, bootlooping forevahhh t.t had to reflash the kernal
khunfused said:
kt747
using ktweaker.
phone keeps resetting itself, bootlooping forevahhh t.t had to reflash the kernal
Click to expand...
Click to collapse
Undervolting is a time consuming process if you wanna take it as low as your phone will allow.
My process is to drop everything 25mV-100mV then test, run bechmarks, play games, run stablility test then drop a little more. If everything is good or drop everything 5-10mv and test again once everything is stable with a full drop across the table I'll start droping individuals until I get to a point where it is unstable and raize it back up a few mV and move on to the next.
Again your phone may not like a full 100mV drop on some of the steps try droping 75mV on the top 3 steps (not sure if your overclocking too) and 100 on everything else.
"Post your undervoting values."
Well, I forgot to vote in the local school district elections and the doggone supplemental levy failed. I'll never undervote again.
yungboss22 said:
Sent from my SAMSUNG-SGH-I747 using XDA Premium HD app
Click to expand...
Click to collapse
take a look at this thread
http://forum.xda-developers.com/showthread.php?t=1886233
Related
Now I am not blaming the app I am just wondering... everynow and then, when I wake my phone up, it doesn't want to wake up or when I turn it on and try to unlock it freezes... was wondering if anyone else was getting the same thing.
Rooted using the one-click method.
Screen off setting is min 400 max 400.
Sent from my SPH-D700 using XDA App
SetCPU issues
I have been having the same issues myself. Mine was set low to 100min/max: screen off just as a test today and it did that to me a on a few seperate occasions. Not sure why, just ended up battery pulling after 10-15 seconds of no response from the phone.
The cpu is set too low on screen off, go for 245 or so
setcpu does not play nice with r phones. i had problems witth it on every kernal i played with. right now im using the mix up kernal. i used setcpu to 1.2ghz max and 100mhz min. conservative governore. i have yet to find a set up to use while the screen is locked with no issues. what i do know is galaxy s phones only like the conservative setting. maybe a 400mhz max 100mhz min with conservastive governore would work?
Make sure setcpu is set to conservative. I set my lowest to 200mhz and max at 1200. No issues here other than sometimes the notification pull down bar is laggy but it does that stock anyway.
Sent from my SPH-D700 using Tapatalk
I'll try out those settings tomorrow. Thanks guys =)
Any1 know how to get to 1.4 ghz? my max is 1.2 on setCPU and i have voodoo kernel flashed
Try this to hit 1.4.
http://forum.androidcentral.com/epic-4g-roms-hacks/36554-emergency-rom-alert-baked-snack-1-0-a.html
zetterwing said:
Try this to hit 1.4.
http://forum.androidcentral.com/epic-4g-roms-hacks/36554-emergency-rom-alert-baked-snack-1-0-a.html
Click to expand...
Click to collapse
thanx dude i really appreciate it but still only 1.2 for sum reason
II5StarII Swag said:
thanx dude i really appreciate it but still only 1.2 for sum reason
Click to expand...
Click to collapse
There's a kernal that allows you to hit 1.4ghz its the overclocked one from baked snacks
Sent from my SPH-D700 using XDA App
mysteryemotionz said:
There's a kernal that allows you to hit 1.4ghz its the overclocked one from baked snacks
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
thats the rom i switched from dude both only allowed up to 1.2ghz thanxs for replying
II5StarII Swag said:
thats the rom i switched from dude both only allowed up to 1.2ghz thanxs for replying
Click to expand...
Click to collapse
The rom don't control the cpu speeds. The kernal does. You cab run any rom kernal combo you would like. In order to hit the 1.4ghz you want you need to run a kernal that is capable of doing so
Sent from my SPH-D700 using XDA App
Is SetCPU really necessary anymore? If you run a kernel that's not locked into performance mode it will scale on it's own even without SetCPU. I haven't installed it on my Epic yet and when monitoring the phone with SystemPanel I see my CPU go down to 200mhz when idle and scale up when processes are running.
Where is the kernel for 1.4? I have baked snack rom max is 1.2 i know kernel is the part that "controlls" speed but I'm stuck. Any help
Sent from my SPH-D700 using XDA App
specialk0324 said:
Where is the kernel for 1.4? I have baked snack rom max is 1.2 i know kernel is the part that "controlls" speed but I'm stuck. Any help
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Last I knew it was on the baked snacks website
Sent from my SPH-D700 using XDA App
I keep hearing people say they uv -xx number to save battery, how do you do that?
You can check the kernel thread you installed from. Usually use echo command and point to vdd_table. If you don't understand what undervolting is, you may not want to do it. It can cause issues if you undervolt too much. It can save battery life, but i would suggest using setcpu, you can find a free copy on xda, and setting profiles, like screen off, in call, etc., to lower values. I would say, stay above 300MHz for min. and clock down the max. Min are: 384-540 for screen off; 384-540 for in call. also, with some roms, you can set the main value, on the first tab, to a lower figure in the max column. I don't charge my phone everyday anymore.
Thanks for the detailed info. But I heard there's an app that does uv?
513263337 said:
Thanks for the detailed info. But I heard there's an app that does uv?
Click to expand...
Click to collapse
FauxClock.Apk V.0.9
But... you need to have Bullet, Juggs or Faux's kernel for this to be useable
Sent from my SGH-T989 using xda premium
Sammydr10 said:
FauxClock.Apk V.0.9
But... you need to have Bullet, Juggs or Faux's kernel for this to be useable
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Luckily, I do use Juggernaut.
I installed fauxclock but I don't see a way to under voltage? I only see the interface to set CPU clock. Am I missing something here?
513263337 said:
I installed fauxclock but I don't see a way to under voltage? I only see the interface to set CPU clock. Am I missing something here?
Click to expand...
Click to collapse
If you swipe towards the left, you don't see a global UV window?
Sent from my SGH-T989 using xda premium
skadude66 said:
If you swipe towards the left, you don't see a global UV window?
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Ah ha!!! I see!!! Thanks!!
I've used up my "thanks" for today but I'll definitely come back tomorrow.
What is the uv number I should generally set to save battery but not have the phone freeze?
If I set it to negative too much and the phone freezes, I just reboot the phone and re-set the number to a higher (less uv) value?
it's different from phone to phone, you just gotta try it out and see.. i UV mine about 100mv under stock at 1.51ghz
G1_enthusiast said:
it's different from phone to phone, you just gotta try it out and see.. i UV mine about 100mv under stock at 1.51ghz
Click to expand...
Click to collapse
Mine can do 100 also
I can only go -62.5. Anything over that will freeze the phone...
How come every phone is different in this regard, does this mean my phone is "born" to consume more battery?
Thought I saw posted somewhere here not to use SetCpu on our phone? FauxClock always FC's on me. Running Jugs overclock on rooted/flashed T-Mo SGS2.
I've been trying to UV my phone to save some battery. I generally keep:
Max: 1080 MHz
Min: 384 MHz
smartass or on demand
However every time I reopen SetCPU it's actually at:
Max: 1080 MHz
Min: 1080 MHz
The governor is sometimes what I save it as...sometimes something else.
I'm currently on Juggernaut (Bullet kernel) but The same problem occurred on Bombadier (Synergy kernel) also.
Any help please?
*Edit
I used to have an SGS Vibrant but never had this sort of problem so I'm a bit confused
Sent from my SGH-T989 using XDA App
Don't use SetCpu. Use the Faux clock listed in the juggernaut thread. It does a great job both with clock speeds and undervolting.
Still have about 20% left after 17hours using 384-1512 lagfree with 384-384 offscreen and -25mv
Sent from my SGH-T989 using xda premium
i ran into this issue and discovered that busybox was no installed properly thus causing this problem.
grab from the market "busybox installer" and make sure you have it installed properly.
Sent from my SGH-T989D using XDA App
Blue1k said:
Don't use SetCpu. Use the Faux clock listed in the juggernaut thread. It does a great job both with clock speeds and undervolting.
Still have about 20% left after 17hours using 384-1512 lagfree with 384-384 offscreen and -25mv
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
I searched "Faux" in that thread and couldn't find anything. Am I missing something?
*just kidding, found the link in the changelog. giving it a shot. Thanks a lot!!!!
firebane said:
i ran into this issue and discovered that busybox was no installed properly thus causing this problem.
grab from the market "busybox installer" and make sure you have it installed properly.
Sent from my SGH-T989D using XDA App
Click to expand...
Click to collapse
Did this, just rebooted. Fingers crossed.
Just bought it but I don't really get it. Both the max and the min. Are at 1.5 set on on demand but at the top it says 384 mhz (I'm guessing that's the current clock speed since I'm not doing anything) don't know which one to trust. should I set the min. at 384 ?
Sent from my SGH-T989 using XDA App
Set the min at 384 and the max where ever you want. Stock is 1.5. You can underclock or overclock (if your kernel supports it). If you overclock dont check set on boot til you have played around with your phone and are sure that your phone can handle it. You can choose what ever governor works best for you. Conservative is best for battery, performance is the worst. Most people go with on demand, but your results may vary.
I've found that the smartassv2 governor gets me the best results.
But its very unstable and can cause crashes.
GreggoryD502 said:
Set the min at 384 and the max where ever you want. Stock is 1.5. You can underclock or overclock (if your kernel supports it). If you overclock dont check set on boot til you have played around with your phone and are sure that your phone can handle it. You can choose what ever governor works best for you. Conservative is best for battery, performance is the worst. Most people go with on demand, but your results may vary.
Click to expand...
Click to collapse
thanks man i just dont know why it doesnt say 1.5 at the top since both the max. and the min. are at 1.5 maybe its a bug or something or maybe thats how it is
ps i hit the thanks
Try clearing the data on set CPU and then uninstalling and re -installing. If that doesn't work, but into recovery and wipe data and wipe dalvik .
Sent from my SGH-T989 using xda premium
Or if that doesn't work go into your superuser app and hit menu, then preferences and update your superuser binaries. Sometimes if they are out of date it can cause issues with set CPU.
Sent from my SGH-T989 using xda premium
Ok will do that
Sent from my SGH-T989 using XDA App
GreggoryD502 said:
Or if that doesn't work go into your superuser app and hit menu, then preferences and update your superuser binaries. Sometimes if they are out of date it can cause issues with set CPU.
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Yup u were right just needed to update my binary su files
Sent from my SGH-T989 using XDA App
glad that worked out! nothing worse then paying for an app and it not work right!
Just curious to see what voltage settings people were using in conjunction with joker's kernel. Screen shots? Post? Whatever. I'm interested!
Sent from my LG-LS970 using xda app-developers app
I'm -50 undervolt a running good. No random reboots or anything. Even played Dead Trigger for an hour and all good. I am also running at 1.62 overclock. All is good.
-Frank
Running 25 under and still good. I'll probably overclock it to get better performance.
frankt2012 said:
I'm -50 undervolt a running good. No random reboots or anything. Even played Dead Trigger for an hour and all good. I am also running at 1.62 overclock. All is good.
-Frank
Click to expand...
Click to collapse
I assume you are -50 on just the highest clock setting?
Sent from my LG-LS970 using xda app-developers app
JeauxAdam said:
I assume you are -50 on just the highest clock setting?
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
No -50 on all clock speeds. I use faux123 from the market. I was running -25 then just bumped it down some more. Might try -75 soon.
-Frank