Develop Bugs

Someone help me? Possibly bricked.

I have been trying to find an answer for the last several hours. But I can't seem to get anything to work.
I have the AT&T GS3 and I was able to flash AOKP but then I wanted to revert back to stock. I tried the toolkit and followed the steps and what might of happened is that AOKP did not get wiped completely when I flashed the stock image. Now after successfully flashing the stock image (I get the PASS! on Odin), my phone is stuck while booting. It goes past the AT&T boot image but gets stuck on "SAMSUNG". I tries flashing through ODIN, another downloaded version of the stock image but it didn't work. What am I doing wrong?

Another problem with being stuck in bootloop is that since I flashed the stock image; I think I no longer have CWM. I can't find a way to get to recovery.

I'm not really sure how to help but if you can get to the boot animations you aren't bricked. I know you're not on verizon but in this thread: http://forum.xda-developers.com/showthread.php?t=1759642 it says when coming from an AOSP rom back to the stock rom you have to flash a stock boot.img before flashing the stock rom. Hope you can get it working again

Did you make a nandroid backup before you flashed the Rom...if you did you can restore from cwm recovery...hold power, volume up, and home...after the screen goes black let go of the power...hope this helps
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

If you can get into download mode , just flash recovery from odin.
And how long have you waited at samsung logo , it might take few minutes to bootup.

I don't have CWM recovery. It got stuck on the Samsung logo for 20 minutes before I gave up and did a battery pull.
What do I flash through odin to get it working again. Which recovery file?

Ok, I just used the method described in this article and I am still stuck at the SAMSUNG logo.
http://www.androidegis.com/how-to/unbrcik-your-us-samsung-galaxy-s3-how-to/

http://forum.xda-developers.com/showthread.php?t=1727443
Tried that. Still same problem. Noticed that the boot-stock-att-sgh-i7.tar is only 10.5 mb. I don't know much about this, but is that tar file enough to get me unbricked?

usually the .tar file should be much larger than that. It's possible that the file you downloaded got corrupted. Try re downloading the file and than flashing it again.
Sent from my SCH-I535 using xda premium

If you look in the mediafire link inside ths artivle, you will notice that the download is only 10 mb
http://forum.xda-developers.com/showthread.php?t=1727443

try this
VJKotts said:
I have been trying to find an answer for the last several hours. But I can't seem to get anything to work.
I have the AT&T GS3 and I was able to flash AOKP but then I wanted to revert back to stock. I tried the toolkit and followed the steps and what might of happened is that AOKP did not get wiped completely when I flashed the stock image. Now after successfully flashing the stock image (I get the PASS! on Odin), my phone is stuck while booting. It goes past the AT&T boot image but gets stuck on "SAMSUNG". I tries flashing through ODIN, another downloaded version of the stock image but it didn't work. What am I doing wrong?
Click to expand...
Click to collapse
Get into download mode
clear cache option
factory reset phone option
That should fix it
CC

How do you factory reset/clear cache in download mode?

VJKotts said:
How do you factory reset/clear cache in download mode?
Click to expand...
Click to collapse
just re flash stock in odin flash Flash this file http://forum.xda-developers.com/showthread.php?t=1737848

soft bricked my phone

Merry Christmas everyone. I tried to resolve this issue my self but was unable to. I had stock 4.3 rooted and flashed MOAR. MD5 matched. Everything seemed ok but when I flashed, it was stuck on "updating apps" for over 20 min. I did a battery pull. My phone started and I was able to go to TWRP recovery. I did a cache wipe and factory reset with plans of reflashing but everything was gone, including my nandroid. I tried to flash stock firmware from http://samsung-updates.com/ it said "failed". I cannot get back into TWRP. Is there any way I can restore to 4.1.2? Or 4.3? I just want to get the phone working again. Ideally I would like to get root back but my main priority is obviously just to get the phone working. Thank you.

jeppuda said:
Merry Christmas everyone. I tried to resolve this issue my self but was unable to. I had stock 4.3 rooted and flashed MOAR. MD5 matched. Everything seemed ok but when I flashed, it was stuck on "updating apps" for over 20 min. I did a battery pull. My phone started and I was able to go to TWRP recovery. I did a cache wipe and factory reset with plans of reflashing but everything was gone, including my nandroid. I tried to flash stock firmwa.
Click to expand...
Click to collapse
I had a similar bad expreience with updating my rooted S3,
to recover your phone try to get md5 recovery room and install it using odin, try to get the one that called recovery (runs stock 4.0.4) then you can update by Kies to 4.3.

If stock means the Samsung update you need to flash the 4.3 firmware. If stock means the de-Knoxed version from here, I would start by flashing a new recovery image then reinstalling the de-Knoxed one.
Can you not get into any recovery at all?

mjkubba said:
I had a similar bad expreience with updating my rooted S3,
to recover your phone try to get md5 recovery room and install it using odin, try to get the one that called recovery (runs stock 4.0.4) then you can update by Kies to 4.3.
Click to expand...
Click to collapse
MD5 recovery room (or rom I googled both)? I could not find it. I'm sorry i have never done this before...could you post the link for it?

Kevets said:
If stock means the Samsung update you need to flash the 4.3 firmware. If stock means the de-Knoxed version from here, I would start by flashing a new recovery image then reinstalling the de-Knoxed one.
Can you not get into any recovery at all?
Click to expand...
Click to collapse
When I press the volume up, home and power button it says "firmware upgrade encountered an issue. Please select recovery mode in kies and try again."
I installed the de-knoxed version..I would like to go back to the de-knoxed version if possible. Is there a way to flash new recovery image through ODIN...again, I'm not very confident in my abilities right now and don't want to flash anything to make it worse. Would it be possible to send me a link with what to flash. Thank you

Sorry I meant rom not room, but youv still can get it from the dev "room" forums. I got it from there.
sorry I cant post links here yet, i dont have the enough posts, but google "unroot sprint galaxy s3" it's one of he first links and once you get the md5 file you can use it with Odin, it's a simple process.

fixed it
Fixed it, got to keep root also. Flashed a new recovery image through ODIN (link for recovery in case anyone else needs it: http://forum.xda-developers.com/showthread.php?p=38079994). Then flashed ROM. Thanks for your help guys.

[Q] Bricked my I747 - Please Help?

Hello,
I'm sure there are many threads on about what I'm about to asked but I am a noob and I don't know what to do!!
I tried to flash cm11 to my I747 last night but it failed. So I tried to flash my recovery and it failed at first but second time around it was successful. Only thing is that when it booted, it got stuck on AT&T splash. I left it for about 15-20 minutes but nothing happened. Wasn't sure if my screen was going to burn the image so I turned it off and removed the battery. I have been doing research on how to recover but I want to make sure I do everything correct so I can at least go back to stock.
If there is anyone out there that can please give me some help I would greatly appreciate it!
Thanks!!
Is this fixable?

loc626 said:
Hello,
I'm sure there are many threads on about what I'm about to asked but I am a noob and I don't know what to do!!
I tried to flash cm11 to my I747 last night but it failed. So I tried to flash my recovery and it failed at first but second time around it was successful. Only thing is that when it booted, it got stuck on AT&T splash. I left it for about 15-20 minutes but nothing happened. Wasn't sure if my screen was going to burn the image so I turned it off and removed the battery. I have been doing research on how to recover but I want to make sure I do everything correct so I can at least go back to stock.
If there is anyone out there that can please give me some help I would greatly appreciate it!
Thanks!!
Is this fixable?
Click to expand...
Click to collapse
\
Yeah. Should be fixable. First, can you try booting to recovery and doing a wipe/reset? I presume you have custom recovery? If this doesn't work, then you can try flashing a complete compatible stock restore image via recovery to get the phone working or flash a custom ROM? What Android version were you on prior to the attempt to flash CM? This would let us know what stock version to revert to.

I was running 4.3 before trying to flash the custom rom. I tried flash the stock rom last night using Odin, but it the flash failed on me twice. I also noticed that the micro sd I had in my cell is now completely dead. When I plug it into my pc it does not show up. I think it still shows up in recovery but it doesnt seem to be working. Im worried about sticking another card in and for some unknown reason it going dead too.
I only found a flash for 4.1.1 as far as stock rom goes.

loc626 said:
I was running 4.3 before trying to flash the custom rom. I tried flash the stock rom last night using Odin, but it the flash failed on me twice. I also noticed that the micro sd I had in my cell is now completely dead. When I plug it into my pc it does not show up. I think it still shows up in recovery but it doesnt seem to be working. Im worried about sticking another card in and for some unknown reason it going dead too.
I only found a flash for 4.1.1 as far as stock rom goes.
Click to expand...
Click to collapse
If you were already on 4.3, please do not try to flash 4.1.1 now otherwise you could risk bricking your phone. If you tried doing the hard wipe/reset via (custom) recovery and this did not work, you can try flashing a complete stock restore image via recovery. See the instructions in the following thread ....
http://forum.xda-developers.com/showthread.php?t=2658486
Unfortunately, you would need to load the stock restore zip to a (micro) SD card. Unless you are able to save files to your phone, there is no other way. Once you have the restore zip ready, boot your phone to recovery mode and flash. You can revert to a custom ROM once your phone is back to working normally.

I had this problem TeamWin Recovery. I put Philz recover on there and it worked fine. You will probably have to ADB philz recovery to your phone, if you chose to try Philz. This is what worked when I rooted my girlfriend's phone.

An easy way to install Philz Touch recovery would be to download and install the latest tar version for the d2lte and flash it via Odin.
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte

Thanks to everyone for your help and solutions.
My co-worker, who flashed my root and recovery, was able to get it back to 4.3 stock. Unfortunately, the backup that he made before rooting did not work in recovery [twrp]. So I lost all my pics from the last two months since getting my phone.
As sad as I was that I couldn't recover the pics, I am happy to have my phone back to normal+root.
I'm not sure, but maybe it bricked from trying to flash cm11 thru twrp?! Can't really say, but the recovery did not go thru either.... It went thru "successfully" but after I would reboot then it would stay on ATT splash.
Oh well... all is good now. I will steer away from custom roms for now and wait until the 4.4 update comes out for my i747. Or if i get another phone later on, I can use the s3 as a lab rat.
Again, thanks to everyone!

[Q] Soft Bricked my i747- HELP!

So I was able to root phone on w/o issue. I installed CWM via play store then proceeded to attempted to load Cyanogen mod via zip..and oh yeah I didn't wipe phone prior so....Now I have infinite loop issue at boot. I've searched the interwebs looking for any way to get back to stock or anything so I'll be able to use the phone again but have come up short every time. I've tried using ODIN to flash stock image but that fails. I've tried various .tar, .tz and anything else that odin will load w/o success. Will anyone take pity on my stupid ass and lens a hand?

exarkun631 said:
So I was able to root phone on w/o issue. I installed CWM via play store then proceeded to attempted to load Cyanogen mod via zip..and oh yeah I didn't wipe phone prior so....Now I have infinite loop issue at boot. I've searched the interwebs looking for any way to get back to stock or anything so I'll be able to use the phone again but have come up short every time. I've tried using ODIN to flash stock image but that fails. I've tried various .tar, .tz and anything else that odin will load w/o success. Will anyone take pity on my stupid ass and lens a hand?
Click to expand...
Click to collapse
Are you able to boot in recovery? (volume up + home + power). You could wipe and try flashing again (the first boot does take a while).
As for Odin, make sure you're using the right image (.tar) if recovery doesn't work.
Here's a little Odin guide: [ODIN] Desktop ODIN ver 3.07 for use with Samsung Galaxy S III

yeah I tried that
BWolf56 said:
Are you able to boot in recovery? (volume up + home + power). You could wipe and try flashing again (the first boot does take a while).
As for Odin, make sure you're using the right image (.tar) if recovery doesn't work.
Here's a little Odin guide: [ODIN] Desktop ODIN ver 3.07 for use with Samsung Galaxy S III
Click to expand...
Click to collapse
So I am able to boot into recovery but it's the stock recovery, not the one I intalled after root.
I've tried flashing stock images, custom images, CWM, TWRP, .TARs all w/o success. In ODIN I've flashed CWM and TWRP and it reports success but upon reboot it goes back to stock recovery and shows now 13 attempts to load custom firmware. I even tried to use Cyanogen,s windows app but even that gets stuck saying it can't communicate w/device. I've tried several driver, hiemdal, (which I can't figure out). What I'd like to do wipe EVERYTHING, like format the phone but I can't seem to remove the Samsung boot loader. Is my phone beyond repair? I'm super bummed, esp since I'm not a total noob when it comes to custom ROMs. I dropped greenpoison on my fist iPhone and had several ROMs on my old Moto Atrix. I think whatever evil Samsiung put on this device is totally screwing me.

exarkun631 said:
So I've tried flashing stock images, custom images, CWM, TWRP, .TARs all w/o success. In ODIN I've flashed CWM and TWRP and it reports success but upon reboot it goes back to stock recovery and shows now 13 attempts to load custom firmware. I even tried to use Cyanogen,s windows app but even that gets stuck saying it can't communicate w/device. I've tried several driver, hiemdal, (which I can't figure out). What I'd like to do wipe EVERYTHING, like format the phone but I can't seem to remove the Samsung boot loader. Is my phone beyond repair? I'm super bummed, esp since I'm not a total noob when it comes to custom ROMs. I dropped greenpoison on my fist iPhone and had several ROMs on my old Moto Atrix. I think whatever evil Samsiung put on this device is totally screwing me.
Click to expand...
Click to collapse
Try with a different stock image (debloated if you want a smaller download).
Also, Heimdall installs its own drivers, therefor Odin won't work on the same usb port you've installed Heimdall on.
Even in stock recovery, you should be able to do a factory reset (I think). Chances are that your ROM is corrupted atm though, you can try doing a factory reset and attempt boot. If that doesn't work, go the Odin way.
Bootloaders are not something to play with, it's the only way to hard-brick your phone (and you definitively don't wanna remove those nor stop Odin while it's flashing them, if the .tar contains them).

what about...
BWolf56 said:
Try with a different stock image (debloated if you want a smaller download).
Also, Heimdall installs its own drivers, therefor Odin won't work on the same usb port you've installed Heimdall on.
Even in stock recovery, you should be able to do a factory reset (I think). Chances are that your ROM is corrupted atm though, you can try doing a factory reset and attempt boot. If that doesn't work, go the Odin way.
Bootloaders are not something to play with, it's the only way to hard-brick your phone (and you definitively don't wanna remove those nor stop Odin while it's flashing them, if the .tar contains them).
Click to expand...
Click to collapse
I updated the phone via ota to latest android (4.3 ?). And I think the stock image I tried using was 4.1.x. Could it be I need to find a stock 4.3.x image from at&t? Any idea where to get this? I don't think AT&T provides ythis as that is where I got the previous stock image.

exarkun631 said:
I updated the phone via ota to latest android (4.3 ?). And I think the stock image I tried using was 4.1.x. Could it be I need to find a stock 4.3.x image from at&t? Any idea where to get this? I don't think AT&T provides ythis as that is where I got the previous stock image.
Click to expand...
Click to collapse
Can you check if the image you used had bootloaders? Cause if so, you might have bricked your phone. You can't downgrade bootloaders from 4.3.
The image can be found here or on sammobile.com

Strange
So after flashing my i747 30x via ODIN w/various .tar for boot and recoveries I was briefly able to boot into CWM. Stupidly, I selected the format option and foolishly restarted, intending to boot back into CWM and flash a .zip image. Once I restarted I was locked out of CWM again and can only boot into stock recovery once again. What am I doing wrong? I just can't wrap my head around why every time I flash a custom recovery like CWM or TWRP or Philz's_Touch in OdIn and it reports success, when I restart it just loads Samsung's ****ty stock recovery. I still can't flash a ROM via ODIN but I'm hoping if I can get back into CWM I'll be able to load a new ROM and use my phone again. Anyhelp would be great.
BWolf56 said:
Can you check if the image you used had bootloaders? Cause if so, you might have bricked your phone. You can't downgrade bootloaders from 4.3.
The image can be found here or on sammobile.com
Click to expand...
Click to collapse

lol
exarkun631 said:
So after flashing my i747 30x via ODIN w/various .tar for boot and recoveries I was briefly able to boot into CWM. Stupidly, I selected the format option and foolishly restarted, intending to boot back into CWM and flash a .zip image. Once I restarted I was locked out of CWM again and can only boot into stock recovery once again. What am I doing wrong? I just can't wrap my head around why every time I flash a custom recovery like CWM or TWRP or Philz's_Touch in OdIn and it reports success, when I restart it just loads Samsung's ****ty stock recovery. I still can't flash a ROM via ODIN but I'm hoping if I can get back into CWM I'll be able to load a new ROM and use my phone again. Anyhelp would be great.
Click to expand...
Click to collapse
So I think I figured out what I did wrong. Recovery mode = pwr+home+VolUp...Download mode = Pwr+home+VolDown. What an a$$hole I am, I thought Download mode and Recovery were one in the same and flashing TWRP or CWM would replace download mode. Once I figured out that one it was a simple matter to boot into recovery and wipe the drive then flash my rom (Omni 4.4.2 D2att) IDK if it's the rom or all the screwing around I did but it now takes no less than 10 min to boot into android from rom splash. Tried updating Kernel to latest but found it didn't fix problem.

exarkun631 said:
So I think I figured out what I did wrong. Recovery mode = pwr+home+VolUp...Download mode = Pwr+home+VolDown. What an a$$hole I am, I thought Download mode and Recovery were one in the same and flashing TWRP or CWM would replace download mode. Once I figured out that one it was a simple matter to boot into recovery and wipe the drive then flash my rom (Omni 4.4.2 D2att) IDK if it's the rom or all the screwing around I did but it now takes no less than 10 min to boot into android from rom splash. Tried updating Kernel to latest but found it didn't fix problem.
Click to expand...
Click to collapse
Did you do a clean flash? Sounds like you didn't factory reset.
Make sure you backup your apps before doing so if you wanna keep your app data.

[Q] Sprint Galaxy S3 will not complete boot process

I've searched around for this specific problem and haven't found anything that will help me. I have the SPH-L710 model through Sprint that was previously running Android 4.4.2. That version killed the battery, so I attempted to root and install a custom ROM. I have rooted before, so superSU was already on the phone. I opted to follow the rooting directions from galaxys3root.com, which uses ClockworkMod Recovery v5.5.0.4. I did that and installed superSU again via a .zip file. When I rebooted the phone, superSU kept stopping. After some frustration, I found that there was an updated superSU v2.01 that I installed via CWM. Being an idiot, I figured I would just go right ahead and trying to install the custom ROM without checking anything. I then attempted to install the Carbon ROM 4.4.4 from galaxys3root.com without first making a backup of my existing version (again, idiot). There was some sort of error, and after that point, I was unable to boot up the phone...it would display the Samsung GS3 screen and then do a continuous bootloop.
I tried finding stock ROMS, but they usually have to be loaded from the SD card rather than through ODIN, and they so far haven't been working. I have downloaded more than one that claimed to be an MD5, but they turned out not to be. My wife has the exact same phone so I thought maybe if I use CWM to save a backup of hers to my SD card, perhaps I could restore that and boot up my phone. I got a bit farther this time and boot up made it through the Samsung GS3 and various Sprint 4g screens before getting stuck on the last Samsung screen.
If I can get the phone to boot up again, I've since learned that once you update superSU, you can have it disable knox, thereby allowing me to root, and thereby allowing me to install a custom ROM, but at this point I just need to get the phone to boot up so I can use it again.
Summary:
Attempted to root using CWM v5.5.0.4
Did not properly disable Knox first and had an error loading custom ROM
Phone stuck in bootloop
Did not back up phone first but have a backup of my wife's exact same model
Used that backup and it gets stuck on very last Samsung screen
Any and all help is appreciated.
Matt

huntley said:
Summary:
Attempted to root using CWM v5.5.0.4
Did not properly disable Knox first and had an error loading custom ROM
Phone stuck in bootloop
Did not back up phone first but have a backup of my wife's exact same model
Used that backup and it gets stuck on very last Samsung screen
Any and all help is appreciated.
Matt
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2738533 <-----Odin stock ND8 rom use Desktop Odin
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte/philz_touch_6.48.4-d2lte.tar.md5/ <------flash this recovery through Odin as well it gives you the option to root the stock ND8 rom under Philz settings choose option re-root(SuperSU)

6th_Hokage said:
http://forum.xda-developers.com/showthread.php?t=2738533 <-----Odin stock ND8 rom use Desktop Odin
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte/philz_touch_6.48.4-d2lte.tar.md5/ <------flash this recovery through Odin as well it gives you the option to root the stock ND8 rom under Philz settings choose option re-root(SuperSU)
Click to expand...
Click to collapse
Thank you. That image worked perfectly, and the recovery is a newer version than I was trying to use earlier.

huntley said:
Thank you. That image worked perfectly, and the recovery is a newer version than I was trying to use earlier.
Click to expand...
Click to collapse
i know lol but its the best one for stock ND8 honestly