[SOLVED] Bootlooped on stock rom after restoring - Samsung Galaxy Gio GT-S5660

Hello, sorry for creating a 'HELP I don't know what to do!' thread, but I really am stuck now.
I had some Adrenaline rom for quite a while but today I decided to go back to stock because I was having some minor problems.
I suppose flashing stock went okay. I've got the stock recovery now, but the phone loops on boot. With the help of this thread I've figured this is because the previous rom (probably) used ext4 whereas stock needs rfs. That guy got it working by going through adb doing something that I can't even get to because adb doesn't recognize my phone. (I've tried installing drivers for adb but Windows doesn't want to use them because it thinks its own drivers are superior, even though I've uninstalled these, it keeps reinstalling them)
I also can't get CWM working. I've run the root update.zip and that seemed to go fine, but when installing CWM the screen just freezes and the phone reboots when pressing the home button.
I'm kind of stuck on how to revive my gio, any help is greatly appreciated.
Thanks.
Edit: SOLVED, thread may be deleted. Went to try flashing CWM through odin (ext4+rfs) and during the reboot phase my phone suddenly booted into the android OS.

Related

HELP PLEASE - EVO 3D Stuck in Bootloop!

Hello All,
I recently rooted my EVO3D using the HTCDEV method because the bootloader was version 1.5.
Here are the steps I followed to root (sorry for the copy and past but I want to be as detailed as possible)
Files Used
su 2.3.6.3
TWRP Recovery
Steps Taken:
1)Take both the su.zip and recovery.img files and put them in your sdk tools folder.
2)Now do the following in ur command prompt, hitting enter after each command.
3)Code:adb push recovery.img /sdcard/And,
4)Code:adb push su-2.3.6.3.zip /sdcard/Then,
5)Code:adb reboot bootloaderUr phone will go to fastboot and should look like the after picture above. Now you can flash the twrp recovery, so do,
6)Code:fastboot flash recovery recovery.imgIt will ouput something like this,
7)Code:sending 'recovery' <5068 KB>... OKAY////writing 'recovery'... OKAY///finished. total time: 11.355sNow you have twrp recovery, so you can navigate to it. On ur phone, use the power button to pick bootloader, then scroll down to recovery and pick that. You will then be booted into recovery.
8)Here you can pick "install zip" and then pick the "su-2.3.6.3.zip"
It will flash, the you can pick "back to main menu", then "reboot system now"
9)You will boot back up and have working Superuser. I have had no trouble with Titanium Backup, Root Explorer, Quick Boot or any other app that requires root. Before you do too much, it would be good to go back to recovery and do a Nandroid backup. Always best to get one ready before you start modding anything.
All of this worked fine, and the phone was "unlocked."
Then, I flashed the most recent version of CleanRom (2.7)
Again, the phone worked fine, battery life was a little crappy.
I decided to flash Ziggy's kernel.I flashed the kernel simply by putting on the SD card, and then rebooting into recovery. This worked fine as well, but I noticed some of the buttons for example the menu popups displayed volume where it should have said more, or bluetooth options where it should have said preferences. so this is where the trouble started, I downloaded kernel manager, and flashed silverneedle through that program. Now, I am stuck at the White HTC Splash screen bootloop. The phone turns on and after 15 seconds reboots, and reboots, and reboots.
What Ive attempted:
I have done countless wipes and clears of the dalvik cache and cache
ive formatted the system and the date sections (advanced menu in twrp)
ive reflashed the rom after wiping countless times
ive tried flashing different kernels in recovery to no avail
factory reset and wipe havent helped
im not concerned losing the contents of the SD card
I need help because I already had two phone claims in the past 11 months, and if I claim another lost phone I will lose insurance for life with Asurion (sprint)
anytips or help would be greatly appreciated
i can provide any additional info
Similar situation, Not sure if you've already solved the problem but I'm going to copy paste my solution from another thread...
Hi, I'm not sure if this is the right place to ask but this is a preety derp question. I've gone across the internet and tried a lot of reflashing to repair my sort of "bricked" evo. What happened, was that I had a evo 3d s-on htc bootloader unlocked, with custom recovery -clockwork..anyways I had flashed the leedroid 3d 4.0 rom and It worked the only problem was my wifi, so i attempted to flash another kernel onto it, but I had accidently flashed "Rcmix" kernel which I later found out was cdma =.=. so now my phone keeps rebooting at the htc screen, it would just load up with the green htc letters, then after 10 seconds or so it'd reboot, and then begin the process again. I can boot into bootloader and recovery but whatever I flash doesn't seem to work including restoring my backups...and then the battery died so i couldn't even charge it or go in. But i managed to work out I could load into bootloader from the CMD and the furthest i've gotten to is to have the bootloader show FASTBOOT USB. SO I must be getting somewhere...? I did read that i had to load from the cmd and not just from power+vol down..but I'd appreciate any help towards restoring my phone to the way it is or at least before i flashed the rcmix.
Just a note tho I've tried factory resetting but all i get is that it loads into recovery at the bootloader options i dont get "clear storage" as an option and "restore to factory settings" and what not just boots me into recovery agian.
EDIT:
I Managed to fix the phoneeee!!!..just for future preferences and anyone else who has this problem...
I followed bits and piece of IL DUCE's advice to izzy spun, the important part was booting the recovery from cmd. I wasn't able to "erase recovery" But I tried just booting it,
First I would remove the battery,
Put it back in,
Plug the usb cable in
1. Type command, from your Adb/fasboot folder, "adb reboot-bootloader"
2. After that I made sure my bootloader said "Fastboot USB", and then I issued the command, "fastboot boot cwm-4.0.1.4-shooteru.img" or with whatever recovery you had..
3. From there I restored from my backups my original rom. Rebooting, and fixed.
--- and It worked. At the time I was on clock work recovery, i only had the Revolutionary recovery img. Cwm-4.0.14.-shooteru.img to be exact,
after going in there I just cleared the cache and davlik and then, proceeded to restore my backups (I'm not sure if it would've worked if I had re-flashed the leedroid or a custom rom)
and then I simply rebooted the phone, and it got back into my phones original state before leedroid (as I had Only backedup before then)....
Apologies for the lengthly post, but I guess reading does help, but I've been going nuts before I managed to fix this. Just thought I'd leave this post incase someone were to need this.
Same problem
Hi there. I just recently joined so excuse my noobness but i have a similar problem. I recently just rooted my evo 3d sprint with the the boot 1.5 and everything went well. I decided i wanted to overclock my phone so i followed zeemaxs way. Before going into the overclock procedure i decided to do the the RCMIX Evo 3d kernel v. 2.2.3 first so i would have better results when done with the overclock procedure.I bootup the kernel through the recovery mode on the phone butit failed to load so i just reeboted. After that my wifi and 4g stopped working. So i downloaded an app on the market called "flash image GUI" which lets me flash the kernels through the app. I flashed the RCMIX kernel and rebooted and now im stuck ima boot loop. I COULD just go back and back up to my old rom and settings etc...........but the problem is i dintmake any kind of back up or recovery i think. I know i know im stupid and an idiot but i just sort of panicked n ended up with this. If anyone can help please tell me.I do not want to pay for a new phone at full price. PLEASE HELP THIS POOR NOOB!!!!! X(
awsomepanda20 said:
Hi there. I just recently joined so excuse my noobness but i have a similar problem. I recently just rooted my evo 3d sprint with the the boot 1.5 and everything went well. I decided i wanted to overclock my phone so i followed zeemaxs way. Before going into the overclock procedure i decided to do the the RCMIX Evo 3d kernel v. 2.2.3 first so i would have better results when done with the overclock procedure.I bootup the kernel through the recovery mode on the phone butit failed to load so i just reeboted. After that my wifi and 4g stopped working. So i downloaded an app on the market called "flash image GUI" which lets me flash the kernels through the app. I flashed the RCMIX kernel and rebooted and now im stuck ima boot loop. I COULD just go back and back up to my old rom and settings etc...........but the problem is i dintmake any kind of back up or recovery i think. I know i know im stupid and an idiot but i just sort of panicked n ended up with this. If anyone can help please tell me.I do not want to pay for a new phone at full price. PLEASE HELP THIS POOR NOOB!!!!! X(
Click to expand...
Click to collapse
What your going to have to do is flash the original kernel you started with. thats why your in a bootloop
Similar problem
Hi everyone!
I have a kind of similar problem, so I won't post it in a new thread.
Yesterday I rooted my phone following this guide: androidforums.com/evo-3d-all-things-root/494212-complete-newbies-guide-rooting-flashing-evo-3d-roms-kernels-using-fastboot . html (i am not allowed to post links to prevent spam).
I unlocked it with htcdev and installed a custom ROM without getting any errors. After restarting the phone, it got into a boot loop; it showed the starting animations of htc and the ROM and then shut down again.
Here some more information:
-Evo 3d Europe gsm
-hboot 1.5
-s-on
-image version 3.28.401
-installed ROMs using clockworkrecoverymod (as proposed in guide)
I have tried these ROMs (all leading to boot loop):
ICS NonSense
Cyanogen Mod 10 – DisarmedToaster (v. 1.4 and 1.5)
Jelly Bean 3d (by Ubuntuz)
SAD 2.1 DEsenseX
I installed the ROMs by doing:
Connect device via usb > flash boot.img via fastboot (from pc) > clear Cashe/UserData/DalvikVM > install rom.zip from sdcard > reboot
I really don't know what to try
Any ideas how I could install a running Android OS are highly appreciated.
Thx for any help
Problem solved!
Ok, I solved the problem by simply relocking the phone and installing the stock ROM with the RUU.exe
RUU.exe
I'm glad someone else mentioned Relocking before running the RUU. I've read several posts be others that have actually stated that Relocking wasn't necessary but in order for the RUU to take you have to Relock. IF you get a chance check out CoolICS Rom and MeanRom both are pretty good.
Thanks all for the help, had to revisit this issue today.

[Q] Stuck with no OS, no emmc access Epic 4g Touch

Hi all,
I'm new to trying to root the E4GT and I've gotten in a bit of a jam. I don't think I'm completely borked because I can still easily get the phone into download mode or Clockwork recovery, but I'm stuck on what to do next and I want to proceed carefully so I don't accidentally turn this into a hard brick.
Because I'm on Linux, not Windows, after reading up on rooting the E4GT I installed heimdall. It's not the most intuitive program in the world but I eventually worked out rooting it using "heimdall flash --kernel ~/path/to/zImage" where the "zImage" in question belonged to Zedomax v3 as linked from epic4gtouchroot.com. That seemed to work brilliantly as I was able to boot into what appeared to be a reset phone, now with a generic Android boot animation rather than the default Sprint advert, and I had the Superuser app.
From there, I decided to try Strongsteve's Odex blue and I booted into Clockwork. Without even thinking about it I wiped the factory data and cache partition, and then started looking into what I needed to do, only to learn that my external SD was going to be inaccessible from here so I had the .zip file in the wrong place. I proceeded to reboot my phone to set things right but I was shocked when the phone simply appeared to turn off after the (new, rooted) boot animation played. The phone then becomes unresponsive until the battery is pulled, at which point it becomes responsive again.
Because it boots the Samsung logo (with the yellow warning triangle) and part of the boot animation, I have plenty of time to get it into download mode or Clockwork, but I don't know what my next move is. I guess (based on a bad experience with trying to root a Kindle Fire) that this is still recoverable, though. Should I just flash a stock/stock rooted ROM? Reflashing the Zedomax kernel doesn't seem to work like it did before. Has anyone encountered this? Does anyone have a link to a recovery method that should be reliable in this situation? Thanks in advance and please remember LINUX -- i.e., no Odin.
[[ PS - I pretty much described the whole process above, but in case anyone was wondering, let me explicitly state I do not have a working nandroid backup. I only got Clockwork after rooting successfully, and I didn't think wipe data/cache was potentially a brick! :\ ]]
UPDATE: Solved! I was able to successfully flash the zImage from the stock rooted kernel here. Phone is working (and rooted) once again!

[Q] Bootloop even after wiping

Ive tried searching and googling, but couldnt really find an answer to my problem..I have flashed many roms on my HD2, but only 1 on my gnex. I dont know much about using terminal and the adb system..so im quite lost.
sitation:
-when i put my battery in, i can go into fastboot
-if i let it boot, the google logo with the lock at the bottom boots... then it goes to the loading screen... after about 5-10 seconds, it will reboot and repeat.
i have the sdk tools thing installed on my mac. Im pretty sure its installed correctly but im not exactly sure how to use it.I have an old version of gummy (0.9.0?) and have been running it fine for about 2 months. I used the toolkit program to root and unlock it. installed cwm and installed the rom. didnt have any problems until today, i had just sent an email, and then about a minute or two later, the phone restarted and started booting itself over and over.
I booted into recovery and wiped everything and still boot loops. So i wiped everything again and installed the same rom because I don't know transfer through bootloader. still no luck, after leaving bootloader or recovery it will continue to boot loop.
right now i cant reflash to stock because i can't get my phone to connect to my mac.
my questions:
-will i need to reflash my baseband//kernel/recovery?
-either an update of the rom or a new rom would fix this, yes? how do i transfer a new rom to my phone through fastboot?
-Since i dont have access to my pc, can i do this from my mac? How?
sorry to be so newbie, but i really am with the gnex If anyone can please give me a general step by step... i can search how to specifically do each step.. but i just need help figuring out what to do at this point. Any help would be greatly appreciated! Thank you!!!

CWM Recover help

I have a serious problem. I have a Samsung Galaxy s II Tmobile for about a year now I have had it rooted since day one with not one problem with it. I mostly have had installed custom roms is all. I Just recently updated to CM10.1 nightlys with no trouble. I thought I would update the custom recovery since its been a while I went from 5.0.2.7 and updated to 6.0.2.8 and this is where everything went wrong. my phone went into a bootloop at first wouldn't load at all I went into recovery restored to a cm 10 which was working before which now is doing a boot loop. and i restored back to 2.3.5 rooted and that worked. but with some serious problems. I can't download anything like from the web or play store at all I keep getting this error code 492. I was thinking ok well I'll just put a fresh copy of cm10.1 back on the phone flashing it through recovery and nothing it froze. I played around with this new recovery and found out that I can't install anything through recovery can't fix permissions won't format won't wipe cache or factory reset and it won't even reboot the phone the only thing i got it to do was restore to 2.3.5. well I thought ok well I'll just start over again by unrooting the phone and start at square one again. no problem as the phone isn't bricked but when I hooked it to the computer now its not recognizing it. it comes up as unknown device which worked yesterday and never had a problem before i tried uninstalling drivers off my computer reinstalling them to no success. however I thought If I somehow get rom manager back on the phone i can reinstall 5.0.2.7 back on which i did come up with the idea to use kies air for that which did work. but I couldn't get back to 5.0.2.7 by doing that does anybody have any suggestions that can help me out my phone is working i can do everything that it is suppose to do make call connect to the mobile web, wifi but i want back on my custom rom can anybody help thanks

V410 7.0 LTE bricked

Ok guys I am pretty sure I fubar'd my tablet.
I am stuck in a recovery loop. When I start the tablet it just goes back into recovery. Which if I still had TWRP I think I could still do something, but I flashed cyanogen recovery trying to flash cm13 since I cold not get anything else to work. I cannot boot into download/firmware update screen. The screen just flickers a little and goes dark.
A little background:
Started when tablet forced install of 5.0 update and I was in a recovery loop. I flashed 410 test build, rooted, flashed twrp, installed stock rooted ROM. Everything was fine. Then tablet did it again, this time I just flashed rooted ROM and factory reset. Even took the steps to fix the white lines and storage issues. Was working fine. Got home a few days ago and I was in a recovery loop again. But now I don't have the bootloader screen/download mode/firmware update screen (whatever you want to call it) so last night i tried to download cm13, Gapps and cyanogen recovery with no avail.
I can access adb on my PC while in recovery, but when I try to access ADB shell I get unauthorized something or other. Because I cannot authorize USB debugging, because ROM won't boot. I tried to flash stock rooted ROM from cyanogen recovery and it says not signed or something like that.
Does anyone have any ideas? I really think I have screwed the pooch here.
sent from a device using an app
title
if you have a stock recovery image flashing it is easy, i had a LOT of troubles with my v410 and still am working with it. i have mine rooted, just with TWRP though, i cant use xposed framework, which negates why i rooted this in the first place. anyway, through much grit and determination flash your stock image after wiping what needs to be wiped and doing all other necessary things. Then, you must download kingo root, supersu, superuser. flashify would help with the flashing i hear, but it has troubles with the v410. kingo root was an apk i managed to find buried under a million viruses on the 34th page of google..or something. rooted mine in one click, from stock to reboot to twrp root.. many glitches.
I need help myself, deleted my "Phone" system app, causing me to lose connectivity with my data plan. cant seem to restore it, and flashify nor twrp has been able to flash a custom recovery, or a backup, im at a loss.
Help? We seek the same thing.
Ok but how do I flash the stock recovery image. I can't use fastboot. ADB says I am unauthorized.
sent from a device using an app
Anyone have any other ideas?
I am at a complete loss. I am by no means a developer, but I do know my way around. I really think I have FUBAR'd this one.
Kind of stinks, I give up. Anyone want a bricked v410?
Sent from my Galaxy Tab 2 using Tapatalk

Categories

Resources