[Q] Bootloop even after wiping - Samsung Galaxy Nexus

Ive tried searching and googling, but couldnt really find an answer to my problem..I have flashed many roms on my HD2, but only 1 on my gnex. I dont know much about using terminal and the adb system..so im quite lost.
sitation:
-when i put my battery in, i can go into fastboot
-if i let it boot, the google logo with the lock at the bottom boots... then it goes to the loading screen... after about 5-10 seconds, it will reboot and repeat.
i have the sdk tools thing installed on my mac. Im pretty sure its installed correctly but im not exactly sure how to use it.I have an old version of gummy (0.9.0?) and have been running it fine for about 2 months. I used the toolkit program to root and unlock it. installed cwm and installed the rom. didnt have any problems until today, i had just sent an email, and then about a minute or two later, the phone restarted and started booting itself over and over.
I booted into recovery and wiped everything and still boot loops. So i wiped everything again and installed the same rom because I don't know transfer through bootloader. still no luck, after leaving bootloader or recovery it will continue to boot loop.
right now i cant reflash to stock because i can't get my phone to connect to my mac.
my questions:
-will i need to reflash my baseband//kernel/recovery?
-either an update of the rom or a new rom would fix this, yes? how do i transfer a new rom to my phone through fastboot?
-Since i dont have access to my pc, can i do this from my mac? How?
sorry to be so newbie, but i really am with the gnex If anyone can please give me a general step by step... i can search how to specifically do each step.. but i just need help figuring out what to do at this point. Any help would be greatly appreciated! Thank you!!!

Related

Stuck in Fastboot/Bootloader

While once again needlessly flashing stuff on my phone I lost SMS with the Cyanogen6 Snap kernel with Snap Turbo. From what I read I decided I had to reflash a stock rom to regain my ability to receive SMS. A flash of the update file has left me stuck in the bootloader. I had thought I good having used Unrevoked a few weeks ago. My Hboot was updated and is -S. When I turn the phone on it gets stuck on the white htc screen. Same when I try to boot into recovery. So I need to know how to reflash my phone with a stock rooted rom so I can start over. Shell commands work for fastboot but I am getting remote:not allowed responses when I try and flash recovery.
Please can you help me? I am going to sleep and letting the Evo get a full charge. Please do not delete this and link me to a solution.
Came here for the same, Did you fix this? my problem got worse, since adb doesn't seem to recognize the device, and none of Caulkin's methods here: seemed to work either. Somehow, along the way, Clockworkmod recovery got lost too, and I can't even flash a different rom.
shogun26 said:
Came here for the same, Did you fix this? my problem got worse, since adb doesn't seem to recognize the device, and none of Caulkin's methods here: seemed to work either. Somehow, along the way, Clockworkmod recovery got lost too, and I can't even flash a different rom.
Click to expand...
Click to collapse
I'd like to add a "me too" here.
I'm stuck with only fastboot available for getting the phone to work again.
I have a nandroid backup on my PC, that I could put on it. But I don't know the
fastboot command to use, or if there's even one available to use for a nandroid.
I also have a complete PC36IMG.zip. But again, I don't know the fastboot command
to use, or whether it's even possible.
Please help.
Thank you.
--Chris
I have the SAME PROBLEM! What's going on guys? Any fix?

HELP PLEASE - EVO 3D Stuck in Bootloop!

Hello All,
I recently rooted my EVO3D using the HTCDEV method because the bootloader was version 1.5.
Here are the steps I followed to root (sorry for the copy and past but I want to be as detailed as possible)
Files Used
su 2.3.6.3
TWRP Recovery
Steps Taken:
1)Take both the su.zip and recovery.img files and put them in your sdk tools folder.
2)Now do the following in ur command prompt, hitting enter after each command.
3)Code:adb push recovery.img /sdcard/And,
4)Code:adb push su-2.3.6.3.zip /sdcard/Then,
5)Code:adb reboot bootloaderUr phone will go to fastboot and should look like the after picture above. Now you can flash the twrp recovery, so do,
6)Code:fastboot flash recovery recovery.imgIt will ouput something like this,
7)Code:sending 'recovery' <5068 KB>... OKAY////writing 'recovery'... OKAY///finished. total time: 11.355sNow you have twrp recovery, so you can navigate to it. On ur phone, use the power button to pick bootloader, then scroll down to recovery and pick that. You will then be booted into recovery.
8)Here you can pick "install zip" and then pick the "su-2.3.6.3.zip"
It will flash, the you can pick "back to main menu", then "reboot system now"
9)You will boot back up and have working Superuser. I have had no trouble with Titanium Backup, Root Explorer, Quick Boot or any other app that requires root. Before you do too much, it would be good to go back to recovery and do a Nandroid backup. Always best to get one ready before you start modding anything.
All of this worked fine, and the phone was "unlocked."
Then, I flashed the most recent version of CleanRom (2.7)
Again, the phone worked fine, battery life was a little crappy.
I decided to flash Ziggy's kernel.I flashed the kernel simply by putting on the SD card, and then rebooting into recovery. This worked fine as well, but I noticed some of the buttons for example the menu popups displayed volume where it should have said more, or bluetooth options where it should have said preferences. so this is where the trouble started, I downloaded kernel manager, and flashed silverneedle through that program. Now, I am stuck at the White HTC Splash screen bootloop. The phone turns on and after 15 seconds reboots, and reboots, and reboots.
What Ive attempted:
I have done countless wipes and clears of the dalvik cache and cache
ive formatted the system and the date sections (advanced menu in twrp)
ive reflashed the rom after wiping countless times
ive tried flashing different kernels in recovery to no avail
factory reset and wipe havent helped
im not concerned losing the contents of the SD card
I need help because I already had two phone claims in the past 11 months, and if I claim another lost phone I will lose insurance for life with Asurion (sprint)
anytips or help would be greatly appreciated
i can provide any additional info
Similar situation, Not sure if you've already solved the problem but I'm going to copy paste my solution from another thread...
Hi, I'm not sure if this is the right place to ask but this is a preety derp question. I've gone across the internet and tried a lot of reflashing to repair my sort of "bricked" evo. What happened, was that I had a evo 3d s-on htc bootloader unlocked, with custom recovery -clockwork..anyways I had flashed the leedroid 3d 4.0 rom and It worked the only problem was my wifi, so i attempted to flash another kernel onto it, but I had accidently flashed "Rcmix" kernel which I later found out was cdma =.=. so now my phone keeps rebooting at the htc screen, it would just load up with the green htc letters, then after 10 seconds or so it'd reboot, and then begin the process again. I can boot into bootloader and recovery but whatever I flash doesn't seem to work including restoring my backups...and then the battery died so i couldn't even charge it or go in. But i managed to work out I could load into bootloader from the CMD and the furthest i've gotten to is to have the bootloader show FASTBOOT USB. SO I must be getting somewhere...? I did read that i had to load from the cmd and not just from power+vol down..but I'd appreciate any help towards restoring my phone to the way it is or at least before i flashed the rcmix.
Just a note tho I've tried factory resetting but all i get is that it loads into recovery at the bootloader options i dont get "clear storage" as an option and "restore to factory settings" and what not just boots me into recovery agian.
EDIT:
I Managed to fix the phoneeee!!!..just for future preferences and anyone else who has this problem...
I followed bits and piece of IL DUCE's advice to izzy spun, the important part was booting the recovery from cmd. I wasn't able to "erase recovery" But I tried just booting it,
First I would remove the battery,
Put it back in,
Plug the usb cable in
1. Type command, from your Adb/fasboot folder, "adb reboot-bootloader"
2. After that I made sure my bootloader said "Fastboot USB", and then I issued the command, "fastboot boot cwm-4.0.1.4-shooteru.img" or with whatever recovery you had..
3. From there I restored from my backups my original rom. Rebooting, and fixed.
--- and It worked. At the time I was on clock work recovery, i only had the Revolutionary recovery img. Cwm-4.0.14.-shooteru.img to be exact,
after going in there I just cleared the cache and davlik and then, proceeded to restore my backups (I'm not sure if it would've worked if I had re-flashed the leedroid or a custom rom)
and then I simply rebooted the phone, and it got back into my phones original state before leedroid (as I had Only backedup before then)....
Apologies for the lengthly post, but I guess reading does help, but I've been going nuts before I managed to fix this. Just thought I'd leave this post incase someone were to need this.
Same problem
Hi there. I just recently joined so excuse my noobness but i have a similar problem. I recently just rooted my evo 3d sprint with the the boot 1.5 and everything went well. I decided i wanted to overclock my phone so i followed zeemaxs way. Before going into the overclock procedure i decided to do the the RCMIX Evo 3d kernel v. 2.2.3 first so i would have better results when done with the overclock procedure.I bootup the kernel through the recovery mode on the phone butit failed to load so i just reeboted. After that my wifi and 4g stopped working. So i downloaded an app on the market called "flash image GUI" which lets me flash the kernels through the app. I flashed the RCMIX kernel and rebooted and now im stuck ima boot loop. I COULD just go back and back up to my old rom and settings etc...........but the problem is i dintmake any kind of back up or recovery i think. I know i know im stupid and an idiot but i just sort of panicked n ended up with this. If anyone can help please tell me.I do not want to pay for a new phone at full price. PLEASE HELP THIS POOR NOOB!!!!! X(
awsomepanda20 said:
Hi there. I just recently joined so excuse my noobness but i have a similar problem. I recently just rooted my evo 3d sprint with the the boot 1.5 and everything went well. I decided i wanted to overclock my phone so i followed zeemaxs way. Before going into the overclock procedure i decided to do the the RCMIX Evo 3d kernel v. 2.2.3 first so i would have better results when done with the overclock procedure.I bootup the kernel through the recovery mode on the phone butit failed to load so i just reeboted. After that my wifi and 4g stopped working. So i downloaded an app on the market called "flash image GUI" which lets me flash the kernels through the app. I flashed the RCMIX kernel and rebooted and now im stuck ima boot loop. I COULD just go back and back up to my old rom and settings etc...........but the problem is i dintmake any kind of back up or recovery i think. I know i know im stupid and an idiot but i just sort of panicked n ended up with this. If anyone can help please tell me.I do not want to pay for a new phone at full price. PLEASE HELP THIS POOR NOOB!!!!! X(
Click to expand...
Click to collapse
What your going to have to do is flash the original kernel you started with. thats why your in a bootloop
Similar problem
Hi everyone!
I have a kind of similar problem, so I won't post it in a new thread.
Yesterday I rooted my phone following this guide: androidforums.com/evo-3d-all-things-root/494212-complete-newbies-guide-rooting-flashing-evo-3d-roms-kernels-using-fastboot . html (i am not allowed to post links to prevent spam).
I unlocked it with htcdev and installed a custom ROM without getting any errors. After restarting the phone, it got into a boot loop; it showed the starting animations of htc and the ROM and then shut down again.
Here some more information:
-Evo 3d Europe gsm
-hboot 1.5
-s-on
-image version 3.28.401
-installed ROMs using clockworkrecoverymod (as proposed in guide)
I have tried these ROMs (all leading to boot loop):
ICS NonSense
Cyanogen Mod 10 – DisarmedToaster (v. 1.4 and 1.5)
Jelly Bean 3d (by Ubuntuz)
SAD 2.1 DEsenseX
I installed the ROMs by doing:
Connect device via usb > flash boot.img via fastboot (from pc) > clear Cashe/UserData/DalvikVM > install rom.zip from sdcard > reboot
I really don't know what to try
Any ideas how I could install a running Android OS are highly appreciated.
Thx for any help
Problem solved!
Ok, I solved the problem by simply relocking the phone and installing the stock ROM with the RUU.exe
RUU.exe
I'm glad someone else mentioned Relocking before running the RUU. I've read several posts be others that have actually stated that Relocking wasn't necessary but in order for the RUU to take you have to Relock. IF you get a chance check out CoolICS Rom and MeanRom both are pretty good.
Thanks all for the help, had to revisit this issue today.

Desperate Help Needed!

So I am the proud owner of a shiny, new Galaxy Nexus (GSM). Unlocked the bootloader and installed CWM recovery and was doing great. Today I decided to install the volume fix. Installed the zip through recovery, completed and rebooted. The phone got stuck in a bootloop over and over and over and over and would not boot Android at all. Did a ton of research here and everywhere and, in a panic, I booted into CWM recovery, reset the cache & did a full factory reset. NOW, the phone will not go past the Google bootscreen with the unlock symbol, no matter what I do. AND, I can't even flash the original google image because I can't get in to set USB debugging so my computer won't even recognize the phone (FYI, I'm on a Mac). I am at a complete loss and don't know what to do. If I could only get the computer to recognize the phone I could flash the original google image through Terminal, but alas, I can't. Any ideas? If I can somehow get this phone back up and running I would be eternally grateful. For now, I think I may be SOL. Thanks....
This happened to me, I was not able to solve the issue, even though I could push and pull data to and from the device via ADB. I could still not get past the google logo. I decided to lock the boot loader again and return to the store for a new device.
http://groups.google.com/group/android-building/msg/2cd2b16ed56a7e84
Sent from my Galaxy Nexus using XDA App
hartford said:
So I am the proud owner of a shiny, new Galaxy Nexus (GSM). Unlocked the bootloader and installed CWM recovery and was doing great. Today I decided to install the volume fix. Installed the zip through recovery, completed and rebooted. The phone got stuck in a bootloop over and over and over and over and would not boot Android at all. Did a ton of research here and everywhere and, in a panic, I booted into CWM recovery, reset the cache & did a full factory reset. NOW, the phone will not go past the Google bootscreen with the unlock symbol, no matter what I do. AND, I can't even flash the original google image because I can't get in to set USB debugging so my computer won't even recognize the phone (FYI, I'm on a Mac). I am at a complete loss and don't know what to do. If I could only get the computer to recognize the phone I could flash the original google image through Terminal, but alas, I can't. Any ideas? If I can somehow get this phone back up and running I would be eternally grateful. For now, I think I may be SOL. Thanks....
Click to expand...
Click to collapse
One more post like this in Dev section and you'll be banned for 3 weeks

Bricked gnex and I'm well out of my depth. HELP PLEASE!

Hello,
I had a problem I posted about earlier and I had no replies, so I stupidly tried to fix it myself. Here's the original post
"I'm in a bit of a pickle. I'm running gummy 1.0, and I was just messing around with the lockscreens that are native on the rom, and I changed back to the stock ics one and now my phone won't unlock without rebooting. As soon as I Hello,touch the padlock it restarts.
This would be no more than a minor inconvenience if I hadn't recently had to wipe my SD card due to memory issues (and after forgetting to add any new backups and any rom zips). So I cannot reinstall a back up or reinstall the rom from recovery. I've tried putting a rom back onto the SD via usb but the phone connects as a media device and the computer won't sync. hmm"
I've just done the factory reset from adb and now the phone is stuck in a bootloop. When I start fastboot it says "downloading do not turn off target!!" What in God's name have I done?!
I know this is totally my fault for trying to fix something when I'm in well out of my depth, but I'd really appreciate some help.
Thanks
James, the idiot
First thing I'd suggest is downloading the GNex toolkit located here:
http://forum.xda-developers.com/showthread.php?t=1392310
To re-flash CWM to be on the safe side, then use the adb push feature to push a rom .zip onto the phone. Then boot into CWM and re-flash it.
See if that works.
EchoVelocity said:
First thing I'd suggest is downloading the GNex toolkit located here:
http://forum.xda-developers.com/showthread.php?t=1392310
To re-flash CWM to be on the safe side, then use the adb push feature to push a rom .zip onto the phone. Then boot into CWM and re-flash it.
See if that works.
Click to expand...
Click to collapse
That sounds about right.
Boot to bootloader, flash CWM, boot to recovery, adb push a new ROM to /sdcard, flash ROM, profit.
Hello and thanks for your reply!
It was the Gnex toolkit that I was using, and without it I would be even more lost!
I'm not sure if you're some good omen or something but just as I read your reply, after leaving the phone in a bootloop for about 10 minutes, it just started up by itself!
Hopefully this is the end of my problems
Thanks again for your reply!
James

[SOLVED] Bootlooped on stock rom after restoring

Hello, sorry for creating a 'HELP I don't know what to do!' thread, but I really am stuck now.
I had some Adrenaline rom for quite a while but today I decided to go back to stock because I was having some minor problems.
I suppose flashing stock went okay. I've got the stock recovery now, but the phone loops on boot. With the help of this thread I've figured this is because the previous rom (probably) used ext4 whereas stock needs rfs. That guy got it working by going through adb doing something that I can't even get to because adb doesn't recognize my phone. (I've tried installing drivers for adb but Windows doesn't want to use them because it thinks its own drivers are superior, even though I've uninstalled these, it keeps reinstalling them)
I also can't get CWM working. I've run the root update.zip and that seemed to go fine, but when installing CWM the screen just freezes and the phone reboots when pressing the home button.
I'm kind of stuck on how to revive my gio, any help is greatly appreciated.
Thanks.
Edit: SOLVED, thread may be deleted. Went to try flashing CWM through odin (ext4+rfs) and during the reboot phase my phone suddenly booted into the android OS.

Categories

Resources