I know many of us want to know, so to all the Defender owners out there (I'm still waiting for mine from Amazon) can it be modded to work with the 2600mAh battery or one of the 3500mAh eBay batteries? The commuter is just a tad to small for it to work, I'm hoping the answer is yes for the Defender.
I've ordered a 2nd battery door that I'm planning on cutting out a hole in so the battery pokes out. I suppose you could roll without a battery door at all as well. The next step would be to cut out the inside silicone membrane of the Defender to make room for the battery. At least that's my plan anyway.
OneStepAhead said:
I know many of us want to know, so to all the Defender owners out there (I'm still waiting for mine from Amazon) can it be modded to work with the 2600mAh battery or one of the 3500mAh eBay batteries? The commuter is just a tad to small for it to work, I'm hoping the answer is yes for the Defender.
I've ordered a 2nd battery door that I'm planning on cutting out a hole in so the battery pokes out. I suppose you could roll without a battery door at all as well. The next step would be to cut out the inside silicone membrane of the Defender to make room for the battery. At least that's my plan anyway.
Click to expand...
Click to collapse
Sounds exciting my man. Waiting to see the final product
I too am wanting to know the answers to this question...
after looking at a defender case on a friend's Iphone I was thinking it may be possible... but you would prolly have to cut some of the Defender's hard casing up to make it all fit
we really just need someone who has one and an extended battery to "eyeball" it for us
bump...
I really wish a Defender owner could chip in here
OneStepAhead said:
I know many of us want to know, so to all the Defender owners out there (I'm still waiting for mine from Amazon) can it be modded to work with the 2600mAh battery or one of the 3500mAh eBay batteries? The commuter is just a tad to small for it to work, I'm hoping the answer is yes for the Defender.
I've ordered a 2nd battery door that I'm planning on cutting out a hole in so the battery pokes out. I suppose you could roll without a battery door at all as well. The next step would be to cut out the inside silicone membrane of the Defender to make room for the battery. At least that's my plan anyway.
Click to expand...
Click to collapse
I wouldn't see why not, but you'll be cutting through the hard plastic, not the silicone, the defender has the plastic on the inside and rubber on the out,so it will allow a bit of leeway depending on the elasticity of the silicone wrap. But without first seeing how far the 2600mAh battery sticks out, or knowing the thickness of the Otterbox's plastic, it's kind of a measure it and find out or just do it and find out.
Judging from pictures the 3500 battery looks to be about 2 times thick as stock. Which should put you about flush with the camera lens without the stock battery door. Everything looks like it should work hollowing out the inside of the defender exept they moved the kickstand up a little higher so you probably wont have enough meat there to support it.
i think the kickstand would be in the way... unless you want to cut that out completely and have no kick stand.
Im looking at my commuter and see the possibility of cutting out the battery back along with modifying the seidio battery cover to remove the rails... it should work better than on the defender.
dont know whether or not i want to commit to sticking a dremel tool in my case and doing some surgery.... i miss my extended battery though.
I have a defender case that I was willing to cut out but after studying it I realize its not worth even trying. The kickstand area would have to be completely cut out, the protector for the camera lens and led would also have to be cut out because the bottom edge would have to be cut for the battery to go through. The only hope is one of the seidio extended cases, the rugged in particular.
Sent From My "EVO"
I currently am using the rugged but dont have the extended but my sister in law does so ill do some investigating and ill post back the results. I think it should be ok but itll lose the silicone camera lense cover. Theres no kickstand so thats good. Only prob i think is the plastic outer might be too narrow.
Keep us posted, if it works I will buy one in a heartbeat. I can't stand having my EVO naked any longer but don't want to lose the extended battery either.
Sent From My "EVO"
For the amount of cutting that would need to be done, it probably would not be worth it. There is a lot of plastic to knife through. The silicone isn't terribly flexible either.
The case would be butchered due to fitment. Not worth spending $30 to essentially destroy a decent case.
I did it!
I have a big fat 3500 mah battery.
I also own a Defender. I put my EVO in the plastic Defender case WITHOUT the battery back on. I did not try to close the plastic case (it won't close), I just carefully stretched the rubber exterior over my ghetto rig and voila, IT FITS!
The answer is:
1) Leave the battery back off.
2) Don't try to clip the plastic case closed.
3) Carefully stretch the rubber exterior over.
Take pics I wanna seeeeeeee!!!!!!!!!!
No need, just looks like a slightly fat defender.
Mitchell's EVO
mitchellvii said:
I have a big fat 3500 mah battery.
I also own a Defender. I put my EVO in the plastic Defender case WITHOUT the battery back on. I did not try to close the plastic case (it won't close), I just carefully stretched the rubber exterior over my ghetto rig and voila, IT FITS!
The answer is:
1) Leave the battery back off.
2) Don't try to clip the plastic case closed.
3) Carefully stretch the rubber exterior over.
Click to expand...
Click to collapse
So what about the 2600mAh one from Sprint. If I leave the back door off do you think the case would go together?
ClevelandWheeler said:
So what about the 2600mAh one from Sprint. If I leave the back door off do you think the case would go together?
Click to expand...
Click to collapse
I tried it and the hard case won't go together.
Sent From My "EVO"
jeriel05 said:
I tried it and the hard case won't go together.
Sent From My "EVO"
Click to expand...
Click to collapse
The plastic case wont snap shut but if you stretch the rubber over it it works fine.
jeriel05 said:
I tried it and the hard case won't go together.
Sent From My "EVO"
Click to expand...
Click to collapse
The plastic case wont snap shut but if you stretch the rubber over it it works fine.
** However, with an extended battery and the Defender Case, you have transformed your sleek EVO into a big ass heavy brick.
I want to get an extended battery (nothing huge, no 3500 for me, but something in the lower 2000s will be fine) but I don't want to sacrifice being able to use a badass case like Trident cyclops or defender (can't decide which I want).
However, I don't think there's a 2000+ sized battery that'll fit in the stock case, so do any of those companies make cases for phones that have extended batteries?
If not, can anyone tell me the largest battery you can fit inside of a stock back door?
1800 is the biggest that will fit under the stock door....I just got a 3500 and will NEVER go back..awesome!
you can fit the sprint 2600 in the ballistic case with some modifications... there is a thread about it somewhere on here where someone was asking and I posted pictures showing what needed to be done
bump......
no one makes a rugged extended case except sedio man... thats it, your only option other than modding the ballistic case.
^ +1
i did this and its awesome!
I have the Seidio Extended battery and simply took one of my TPU cases and modded the back to be cut open around the extended part. The remaining cover still houses the sides and corners as usual and the extended case protects the camera/flash area. I have dropped it a few times and it has held up just as well.
At $4-5 a case, simple enough to do. I didn't want the added bulk of the Seidio Rugged, and the slim one piece case just simply fails to protect the phone when being dropped.
Some very small [email protected] pics from my webcam.
***Just read elsewhere that a credit card makes the perfect shape to cutout for a perfect tight fit to the Seidio Extended's bumpout.
Ceger
Are there any known cases that fit with this battery in place?
Scott
Where did you find a battery that big for the X because that is awesome. Getting back to your question I think you might have to custom make one.
Sent from my DROIDX using xda premium
Even though this is dated( ), I thought I'd throw this out there for anyone else interested, the Trident Electra will fit an extended battery (and most kits will actually come with an included battery.) I've got one for my droid x2 and while the case is quite thick (about 2x thickness of a normal Dx/dx2) it is a BEAST. I really like the combination of the hard shell interior and silicone exterior, and I've even accidentally tested the durability by leaving my phone on top of my car after getting gas. Phone fell off as I was driving down the street and all it did was scuff the silicone a bit on one corner. Definitely worth the investment IMO, but I would try to get a case on Amazon or equivalent as Trident wants 80 bucks new! You can find it for half that elsewhere!
This is sort of reaching, but I wonder if I could apply heat to the back of a generic TPU case so that it would stretch enough to fit over the phone with the extended battery cover installed . I would leave the battery out when doing this to protect it from the heat .
buy a silicone one and cut the backing out and glue it on the back of the battery holder. Simple
So I went and bought the Mugen 3900mAh Extended Battery for CDMA version (LTE) and love it, the battery life is awesome.
Here in lies the problem.. the back cover is ugly and is useless as ****
-1st the kick-stand is retarded; why would I want to use this trash and its flimsy as hell
-2nd the back cover takes up useless space thus making the phone look like a 'whale' (which I don't mind but wont fit any case )
So any solution? I have tried the Trexcell TPU Cover Case and it was close to fitting but the back cover but looks like its made out of too much plastic. Is there a cover that will fit the 3900mAh battery or a case that will fit the 'whale' coverback?
I did try the phone without the back cover with the Trexcell and it fits very good so could I use it without the cover? Is that dangerous?
Ideas?
Well I Didn't see any cases.
Have to where it naked
I recently purchased the Gorilla Gadgets extended battery for my SIII. At the same time, I ordered the snap on case that came with it. The problem is that it doesn't fit snugly around the sides of the device. Have any of you out there using extended batteries come across a good case for it? I thought I would ask here and hopefully save some money on other ill fitting cases.
Best I have found is Airbus on amazon. Its not perfect but its far better then the hyperion cases or the yesoo cases stay far away from yesoo. The airbus case did require punching out the mic holes with a paper punch as they were to small and blocking access.
Anything that isn't a TPU case?
At this point, I would be happy with anything that fits properly. The case from Gorilla Gadget is close, but not close enough, and I'm anal about my phone!
Seidioonline is the best I have found
Sent from my SCH-I535 using Tapatalk 2
Have you considered Seidio's extended cases?
Not sure if Seidio's extended battery is the same dimensions as the GG one though.
I personally ordered the active and one of their batteries, though shipping is taking forever