Related
I just flashed Cyanogen to my gf's phone. Is there anything further that needs to be done to insure that her apps will make it on the partition? How large can i make the partition? and I have read I don't need a swap size. is this true as well?
Make 1GB ext3/4 partition. (ext4 is slightly faster)
Then flash A2SD DarkTremor script (after you flash it the device might reboot after boot up, thats normal)
And lastly download A2SD GUI from market and set everything as you like. Apps to SD and Zipaling ON that's for sure, you can also move Dalvik Cache to SD-Ext for extra internal space. (but it's not recommended for performance reasons)
You dont need SWAP thats correct.
partitioning through recovery or rom manager will format ext3/4?
Dont use ROM Manager at all, this thing is horrible and cause lots of trouble.
Try to use Recovery, should be ok. (backup your SD Card content first as it will be wiped)
If you have any issues use gParted.
And make sure you have a backup of the SDCard. I think your gf won't be very happy if her pictures are gone ^^
edifying scripts??? I'm getting an error about this during flashing
Did you turned off signature verification?
If still doesn't work i think you have some old recovery...
If you're S-OFF try flashing recovery from my signature, if not try latest Clockworkmod.
Hey guys,
I'm a pro when it comes to phone hacking but I somehow managed to flash the RCMixHD Rom. I remembered that there quite some steps involved (partitioning sd and whatnot). But since this Rom is not being developed any further (and because I just want something new), I'd like to go back to an AOSP Rom like Cyanogen.
But since there were so many steps involved in flashing RCMixHD, I really don't know how to reverse all this.
I would really appreciate if you could help out a noob.
Thx,
Kalle
just do a nandroid backup, then wipe everything (data/factory reset, cache, dalvik) before flashing the rom...
maybe update your radio
How about the partitioned sd? At which point should I do that?
Download Gparted, and use it to repartition your sd card before you flash your new rom.
Remember to copy your nandroid backup to your pc before using gparted, as partitioning your sd will delete its contents... And to install a completely different rom I would advise making a wipe system (or format system, depend on your recovery)
Tapatalking
As iruiz2 said, copy your nandroid to your pc (after you make afresh one of course) in case something goes wrong. Then repartition your sd card using GParted.
It's recommended to do a first partition of fat32 then a second 1gb partition of ext4 (so if you have a 4gb card, do 3gb as fat32 first, then the remaining 1gb as ext4).
Place the new rom of your choice on the root of your newly partitioned sd card.
Boot into recovery, then wipe everything (factory reset, caches, dalvik cache).
Then install the zip of your new rom.
Reboot.
Enjoy.
A good guide is here... http://forum.xda-developers.com/showthread.php?t=1016084
Thanks a lot guys. Will try it tomorrow. Will keep you posted...
Ok, so, my sd is already partitioned with a 1gb ext2 and the rest with fat32. Cos I can't find my usb stick (and since I don't have a disk drive), I can't make a bootable gparted live usb thingy right now. Do I really need to wipe the ext2 partition? Or even format it with ext4?
Thanks!
If it is already partitioned, you dont need to do anything. Just do a data wipe and flash your new rom.
Thanks again guys. Worked like a charm. I'm running Oxygen now.
Basically we all know that the Desire has a useless ammount of memory. I'm running ICS one of the first beta versions, anyway I've got no memory, I've tried to partition the sd card to ext 4 but it rejects it so I'm looking for someone to point me to the next step with some instructions mainly if I need to revert back to gingerbread, how would I do that?
Thanks Dave
[EDIT] Should also mention I found this thread but doesn't really help me.. http://forum.xda-developers.com/showthread.php?t=1429570&page=2
Please use the Q&A Forum for questions Thanks
Moving to Q&A
How are you trying to partion SD card? Most reliable methods seem to be with 4ext or Gpart.
I've used gparted via ubuntu, but it for some reason doesn't like that, I'm thinking its rom related as it worked on a GB rom but since going over to ICS it doesn't work..
what do you mean 'rejects it'
do you mean that your entire SD card is not being read by the ROM and/or windows ?
You can use one of clockwork recovery's advanced menus to format the drive for you to a size of your choice 512 or 1024 or whatever.. I can't remember if it gave options for ext3 and 4 but you can def. get ext 4 out of it. the rest should be left as fat32.. works like a charm
Dave759 said:
Basically we all know that the Desire has a useless ammount of memory. I'm running ICS one of the first beta versions, anyway I've got no memory, I've tried to partition the sd card to ext 4 but it rejects it so I'm looking for someone to point me to the next step with some instructions mainly if I need to revert back to gingerbread, how would I do that?
Thanks Dave
[EDIT] Should also mention I found this thread but doesn't really help me.. http://forum.xda-developers.com/showthread.php?t=1429570&page=2
Click to expand...
Click to collapse
The way I did it was via the CWM.
Before you do this, make sure that there are no apps stored on the sdcard (because your about to wipe it) - i.e. go through each app (unless you have Titanium Backup, which makes this easier).
Boot into recovery, in the advanced section, select partition sdcard, then select a 512Mb partition (wouldn't go higher - you get issues), select 0 for the swap partition.
Then boot up and follow the instructions about a2sd on this page:-
http://forum.xda-developers.com/showthread.php?t=1355660
It all worked fine for me (and I have loads of space now!)
What version of CWM did you use?
hmmmm, are you using beta 0.3.6?
I mean, there are some instructions for a2sd:
To activate the built in a2sd:
open terminal and run these commands:
su
a2sd install
To move dalvik cache do:
a2sd cachesd
And try with different sd card....
I'm on 0.3.6 i followed the methods of using the CWM to partition it, when i said rejects it i meant that after using gparted android claims it is corrupted and nees to be format. Anyway so after running the terminal commands all fine but i cannot use the phone at all, contacts process crashes and thats followed by "android.process.accore has stopped." Any suggestions? I figured it might be a bad flash so re-flashed it but that doesnt seem to help.
I have not yet partitioned my sd card, I am still sorting things out. I also have low mem error. I believe the bulk of the problem, is the sorting of things. Others have had success with certain configurations of CWM, Droid builds, ext3 or ext4, and cell phone carriers.
After reading like you have, I have seen that CWM partitions have been unsuccessful until after version 2. I am currently running a US Cellular Droid 2.2, Rooted, CWM v4.0.0.2. Sorry for the lack of help yet. I will keep updating as I work through this.
I think best bet for me is to go back to gingerbread and go back to ICS after that and see where I am.
ICS for Desire is too many bug.
Try to erase cash and restart phone
These are the steps you have to do:
1. S-off
2. Get the appropriate partition for the system (see the Alpharev instrutions);you need Bravo Stock or Bravo Data++(I used the last one);
3. with Geparted from Linux(Ubuntu) live cd, partition SD card FAT32 and at least 1,5Gb 4Ext, both as primary partition;
4. power-off your Desire;
5. press Vol. down and Power;
6. go in Recovery;
7. wipe data/factory reset
8. wipe cache partition
9. mounts and storage --> format boot, cache, data, system, sd-ext
10. advanced --> wipe dalvik cache, wipe battery stats
11. install clean rom from http://forum.xda-developers.com/show....php?t=1403113 without trying to get m2sd to work;
12. Setup the Google stuff;
Goodluck!
If you want to have ICS on your Desire, try Chromium v1.5 .
Enviado desde mi HTC Desire
My HTC Desire was restarted due to low battery long after I restored some backups (app + data) with Titanium Backup. When I booted back into Android, it showed 1MB of free internal space! So thought it might be the 4 downloads I had, so I deleted all of them and Android then said it had 61MB of free internal space.
Then I rebooted but now I only have 216KB free space!!
This is the second time it's happened and I've tried everything including SD Maid and every single app is linked to the SD card's 2nd partition. This didn't happen when Installing apps from the Play store or from Easy Installer; and Avast finds no problems.
It keeps saying "Unfortunately Google Play Store has stopped" etc. and the phone is very slow including booting.
I'm not willing to re-flash everything again and manually install each app, especially as the first time re-flashing, Clockwork Recovery said it couldn't mount the SD card, then after formatting, Windows 7 wouldn't recognize it, then neither would (after formatting using gparted)!
I'm only using Link2SD on ICS for HTC Desire 0.4.4.4.1, default HBoot, Clockworkmod Recovery Touch 5.8.0.2, aGPS and default homescreen with no scripts.
This is extremely irritating, can anyone help please?
Using any scripts like A2SD?
Cool story bro. Please post more relevant information so peeps here can help you out. How about letting us know your hboot information, rom you are currently using, scripts etc. ;-)
I'm only using Link2SD on ICS for HTC Desire 0.4.4.4.1, default HBoot, Clockworkmod Recovery Touch 5.8.0.2, aGPS and default homescreen with no scripts.
DarkIceGB said:
I'm only using Link2SD on ICS for HTC Desire 0.4.4.4.1, default HBoot, Clockworkmod Recovery Touch 5.8.0.2, aGPS and default homescreen with no scripts.
Click to expand...
Click to collapse
try stock a2sd then enable it with terminal
Code:
su
a2sd install
y
y
y
Edit: also DL 5.1, i found 4.4.4.1 SUPER buggy.
Thanks for the help, I've tried the above and it's been booting for 10 minutes now, should I wait for it to finish or is it stuck?
Edit: After 30 minutes of booting, I took the battery out. It now won't go past booting (the animated 'X screen') and it takes ages to get past the 'HTC' screen to the boot screen.
Edit 2: I booted into recovery and cleared all caches and fixed permissions and after booting it doesn't say the memory is full! Thanks for your help!
What else did it move and is the data on the first partition of the SD card or the second and can I remove the SD card safely? Any idea how the internal memory was filled and why there were issues with the SD card or if they might appear again? It's a new Samsung Extreme Speed Class 10 16GB Micro SDHC card.
I can't move apps from the SD card to the SD card's second partition or to the internal memory. It says, "pkg: /mnt/asec/appnamehere/pkg.apk Failure [INSTALL_FAILED_INSUFFICIENT_STORAGE]".
The internal memory is empty, the SD card has 8GB of free space and the 2nd partition has 1GB free out of 2GB.
Just upgraded to 5.1 and it's the same as above. Any ideas?
Anyone have any idea?
What A2SD-option did you pick in Aroma Installer? I cannot see any Link2SD option there.
Sorry I meant I chose the built-in a2sd but I used this app called Link2SD as I have a second partition on my sd card for apps.
DarkIceGB said:
Sorry I meant I chose the built-in a2sd but I used this app called Link2SD as I have a second partition on my sd card for apps.
Click to expand...
Click to collapse
How have you partitioned your SD? Primary and secondary FAT32 or primary FAT32 and secondary EXT? I've never used Link2SD 'cause i prefer the script way, but i think it works the same way.
If you are using EXT for secondary, i recommend you the 4ext recovery, if you are S-OFF you can install it directly from the phone using the Updater form 4ext.net.
Then I suggest you to do:
A nandroid backup
A backup of your SD data
Repartition you SD using 4ext
Check partition allignment with 4ext
Do a full wipe
Restore your SD's backup
Restore your nandroid backup
Re-install 0.5.1 and select built-in a2sd
In rom use terminal like bortak stated, but say NO to moving appdata (slowed down my phone a lot)
Uninstall Link2SD
This will give you a standard installation for a2sd.
If I were in you, i would format everything (except SD card first partition) and start from scratch with the built-in a2sd method without Link2SD; you'll have to reinstall everything and lose every data (backup with TB if you can), but you are sure to run a rock solid method to "enlarge you space"
If you are on double FAT32... well, i cannot help you there
Bortak, correct me if i ever say stupids things i want to help out and you surely are a master in troubleshooting and point to my errors
I'm actually running BCM 3.0U0 + 3.0U1 update with m2sd (with apps and dalvik on ext), 100% V6 supercharged and ScrollingCache patched... i have to say, in my opinion, it finally surpassed Sandvold ICS!
Thanks a lot for the help, I've followed the steps and everything's working now!
I used 4ext recovery, which appears to be a lot better than clockworkmod, with more useful options. 4etx said that the partitions weren't aligned (which I previously set in clockworkmod) so I wiped everything and made fresh partitions which were perfectly aligned. I'm using 0.5.2 now with a full format.
I had/have fat32 then ext4.
I've noticed that most apps don't appear to be on the SD card though. Any advice?
Hello development community
I'm currently running an CM 9 on an unlocked, rooted Wildfire S. A while ago I created a 4 GB partition in my SD card (Ext 2 format I believe) and set link2sd to install all new apps to this partition (this is the tutorial I followed http://forum.xda-developers.com/showthread.php?p=31544540 )
Anyway lately I've been having trouble installing new apps and larger updates (Facebook and DoubleTwist, namely) and my phone keeps telling me that I don't have enough memory. I tried wiping all my cache data and generally cleaning up, still no luck.
So I checked my storage usage in my settings, that's when things got interesting. My phone is telling me that I have 150 MB total of internal storage (which is how much there is without the partition), but somehow I have 229 MB used with 21.63 MB free. Doesn't take a mathematician to figure out that i can't be using 250 MB when there's only 150 MB to be had, however this 250 MB it's telling me I have is a lot less than the 4 GB of space I formatted and am linking everything too.
Does anyone know a way to get the phone to recognize the partition as internal space so it stops telling me I'm running out? I should be able to install any apps to my phone via my computer since they won't install directly from Google Play. Or is there a way I can set everything to just automatically install to the partition? That would solve my app installing problems but I might run into storage problems later on depending on how full my caches get. The more steps your give me the better, I'm still pretty new to this stuff :silly:
Thanks for any help!
PS. I checked some other threads but nothing I saw was helpful; so sorry if this is answered somewhere else, but I didn't find it.
After flashing rom did u flash the latest cronmod script
Sent from my Wildfire S A510e using xda premium
schalm1029 said:
Hello development community
I'm currently running an CM 9 on an unlocked, rooted Wildfire S. A while ago I created a 4 GB partition in my SD card (Ext 2 format I believe) and set link2sd to install all new apps to this partition (this is the tutorial I followed http://forum.xda-developers.com/showthread.php?p=31544540 )
Anyway lately I've been having trouble installing new apps and larger updates (Facebook and DoubleTwist, namely) and my phone keeps telling me that I don't have enough memory. I tried wiping all my cache data and generally cleaning up, still no luck.
So I checked my storage usage in my settings, that's when things got interesting. My phone is telling me that I have 150 MB total of internal storage (which is how much there is without the partition), but somehow I have 229 MB used with 21.63 MB free. Doesn't take a mathematician to figure out that i can't be using 250 MB when there's only 150 MB to be had, however this 250 MB it's telling me I have is a lot less than the 4 GB of space I formatted and am linking everything too.
Does anyone know a way to get the phone to recognize the partition as internal space so it stops telling me I'm running out? I should be able to install any apps to my phone via my computer since they won't install directly from Google Play. Or is there a way I can set everything to just automatically install to the partition? That would solve my app installing problems but I might run into storage problems later on depending on how full my caches get. The more steps your give me the better, I'm still pretty new to this stuff :silly:
Thanks for any help!
PS. I checked some other threads but nothing I saw was helpful; so sorry if this is answered somewhere else, but I didn't find it.
Click to expand...
Click to collapse
First of all, you can never use 4GB of your card as a partition Since there are some restrictions-- 100mb internal is needed for every 500mb sd-ext. We are getting around 100+ internal only for most of the ROMs , right? So you can use only around 600-700MB of the SD card as a partition.
Use min-partition tool and format your card and better make use of that card to the max. Format with ext4 (your choice) for around 700-800MB (Since 1/2/3/4GB is totally useless considering the above restriction) . After that, download and place this on SD card .
Before we go any further make sure that there are no scripts already loaded in that ROM you are using. (Apps2SD, Link2SD, etc). You need to have init.d support to make this work. This , you can verify by opening the ROM zip package and follow the path - system/etc . If you see a "init.d" folder there, then you have this support. All CM9 ROMs have this (I believe). So, now you make sure that the ROM whichever you are trying doesn't have any link2sd or apps2sd pre-loaded in it.
Then do the following.
* Put both the ROM and INT2EXT file on the SD card.
1- Goto Recovery.
2- Wipe Dalvik Cache, Battery Stats (Twice - Just to make sure )
3- Factory reset , Wipe Cache partition (Twice)
4- 'Choose zip from SD card' and select your ROM. Wait until it has finished installation.
5- Once Finished, again 'Choose zip from SD card' and flash/install the INT2EXT file that you have already placed on SD card.
6- Once done, reboot the phone. Goto settings->Apps and check if you have 'added' memory now
7- Go to recovery again and Flash GAPPS.
You are all set to Rock and Roll
Check this if you need more information
Hey, this will give you better space manipulation than the Link2SD, but still this is also limited to use, You can't fill all the internal memory. That will considerably lag your phone. Use the internal memory wisely
I guess this helps. And don't forget to thank "croniccorey" for his work
Thank you so much!!!
rishr4 said:
First of all, you can never use 4GB of your card as a partition Since there are some restrictions-- 100mb internal is needed for every 500mb sd-ext. We are getting around 100+ internal only for most of the ROMs , right? So you can use only around 600-700MB of the SD card as a partition.
Use min-partition tool and format your card and better make use of that card to the max. Format with ext4 (your choice) for around 700-800MB (Since 1/2/3/4GB is totally useless considering the above restriction) . After that, download and place this on SD card .
Before we go any further make sure that there are no scripts already loaded in that ROM you are using. (Apps2SD, Link2SD, etc). You need to have init.d support to make this work. This , you can verify by opening the ROM zip package and follow the path - system/etc . If you see a "init.d" folder there, then you have this support. All CM9 ROMs have this (I believe). So, now you make sure that the ROM whichever you are trying doesn't have any link2sd or apps2sd pre-loaded in it.
Then do the following.
* Put both the ROM and INT2EXT file on the SD card.
1- Goto Recovery.
2- Wipe Dalvik Cache, Battery Stats (Twice - Just to make sure )
3- Factory reset , Wipe Cache partition (Twice)
4- 'Choose zip from SD card' and select your ROM. Wait until it has finished installation.
5- Once Finished, again 'Choose zip from SD card' and flash/install the INT2EXT file that you have already placed on SD card.
6- Once done, reboot the phone. Goto settings->Apps and check if you have 'added' memory now
7- Go to recovery again and Flash GAPPS.
You are all set to Rock and Roll
Check this if you need more information
Hey, this will give you better space manipulation than the Link2SD, but still this is also limited to use, You can't fill all the internal memory. That will considerably lag your phone. Use the internal memory wisely
I guess this helps. And don't forget to thank "croniccorey" for his work
Click to expand...
Click to collapse
Thank you so much for the post! I know it's been a while since the OP, but this worked perfectly! My phone now tells me that I have 705MB of internal storage. I believe all my problems have now been solved. I literally can't say "Thank you" enough!