I have enabled file sharing / nearby devices. My Galaxy S3 is connected to my wifi network. On the top left of my screen I get the icon telling me nearby devices is active. Now what do I do on my PC to access the files on my phone?
Related
Hello,
I want to use portable Wi-Fi hotspot on my phone to connect to my laptop in places where public wi-fi is not available, or to connect to two computers to each other. And it seems to be working.
But I have a problem. I do not want to use mobile network to access Internet for those computers. I want only to exchange data between phone and computer, or between computers themselves.
But every time I switch on hotspot, 3G connection switches on automatically, even if it is switched off on purpose. I know this is intended use of hotspot, but I have a question:
Is there a way to prevent phone switching 3G network on in wi-fi hotspot mode, or just preventing data traffic over 3G?
Or I am missing the point completely?
The application is not intended for such usage; all it does is route traffic between connected wlan-clients and the carrier's apn. The phone itself has the ip-address 192.168.1.1 during this setup, but it is not listening on any ports that would be useful for your setup (ie 'cifs/samba').
LeeCHeSSS said:
The application is not intended for such usage; all it does is route traffic between connected wlan-clients and the carrier's apn. The phone itself has the ip-address 192.168.1.1 during this setup, but it is not listening on any ports that would be useful for your setup (ie 'cifs/samba').
Click to expand...
Click to collapse
I do not know if I do understand you but here are the facts:
I connect two dell laptops to portable wi-fi hotspot on my wildfire s:
one is : 192.168.1.135
other : 192.168.1.185
I can ping one from another. If I share a folder in one (.135) and go to others(.185) "Search for computers or people" I see all files in shared folder and can do all the usual operations over them (edit, move...)
Also if I install Remote Web Desktop from Market on my phone I can access phone through web interface.
In a word, I can do all things as on "normal" wi-fi network ( and I promise it is the only network around here ) except all the time I have 3G switched on. And I do not want to do that because I see my network data traffic going up.
So, as I see things, my only problem is unwanted 3G traffic.
Help?
Ah, but you did not mention that you had installed a seperate application to open up a port for the webinterface.
This however does not change the intended usage for the mobile wifi hotspot application!
hey...you can try this:
1. go to your mobile network settings
2. create a new APN, a dummy one
3. set the new APN as default
4. launch your wifihotspot
I did not test it with 2 pcs but, when u launch wifihotspot, 3g no longer comes on and my pc still connected to the wireless network without any problems.
Let us know your results
Cheers,
Hey,
I ran more test on this issue. The previous posted solution works like a charm.
I was able to use the wifihotspot as a wireless access point:
1. 2 or more PCs can communicate with each other (browse folders)
2. If one of the PCs has internet access, it shares to the rest of the PCs
3. If one of the PCs has an ethernet connection to a server, all other PCs also get connection to the server
For 3. to work, you will need to brigde the local area connection with the wireless connection on the PC that has cabled ethernet connection. Also browsing folders will work only if you use \\server ip (\\servername does not work).
I will try getting DNS access via the hotspot later.
Hope this helps
I connect my phone to several wifi clients & wanted to know if there is a way to create a widget/shortcut to connect it to the appropriate client without having to do it from the settings menu?
And while I'm at it is there a way to remove any unneeded wifi listings that show up? Example my phone will pick up all my neighbors wifi signals & since I have no need to connect to them, there really is no need to have them show up.
As of now my phone is picking up 8 wifi signals from my surrounding neighbors. The only option is "connect" but nothing for "forget"
Anyone?
I was able to create a shortcut to Wifi settings itself, but I would like a widget or shortcut on the home screen for each as follows:
Wifi Home
Wifi GoFlex Satellite
Then I can simply press on whatever widget/shortcut I need & connect to that particular network.
I can't be the only one with this request (Or am I?)
Well I guess it can't be done. I've searched all over the net & nada.
If you have multiple Wifi access points remembered in your settings, you can turn on Wifi with the notification toggle and just let it auto-connect to whatever is closest.
If that doesn't work for you, try Tasker. You can set up automated connections (depending on your nearby cell tower), a menu of options, or other methods. It'll cost you a few dollars, but given all of its other functionality, it's well worth the price.
I'm not sure what my problem is. When I connect my Note 4 to my wifi it says that my network may not provide internet. In addition, it shows "(secured)" next to my SSID name. The phone then connects to the internet, but it doesn't have internet. I think the problem has to do with the fact that my wifi is being brodcasted on 5Ghz. I attached an image of my wifi settings. Does anyone have any ideas of what to change on the router or my phone? Thanks.
As pathetic as it sounds, I simply restarted my phone and reconnect to the network at it is working great. Go figure.
Hi
If I understand correctly the wifi will only work if the phone is close by
I read elsewhere that other smart watches will connect directly to wifi
even if the phone is not on
can someone please clarify & will this option come with future updates ?
Thanks
The phone needs to be only in a close range if you're connected by Bluetooth. If you're connected to a WiFi network, the phone just needs an internet connection and can be on the other side of the world.
foo said:
The phone needs to be only in a close range if you're connected by Bluetooth. If you're connected to a WiFi network, the phone just needs an internet connection and can be on the other side of the world.
Click to expand...
Click to collapse
Thanks Foo
But it doesn't seem to be the case with mine
If I am at home or at work it will connect easily with the Wifi but only if the phone is there
without the phone its saying disconnected , maybe I am missing something
I did a test recently with mine. I left my paired smartphone (Smartphone_A) far out of range of my watch (>100m within a company building). The watch signaled that it is disconnected as it was only connected by Bluetooth before. The smartphone itself was only connected to a 3G network (no WiFi active).
I used a second smartphone (Smartphone_B, obviously not paired with the watch) and activated the mobile hotspot on it. I connected the watch to the mobile hotspot using WiFi and was able to connect to my paired smartphone:
Code:
Watch<---WiFi<--->Smartphone_B<--------->3G mobile data<--------->Smartphone_A
<--------------------receive notifications-------------------------->
I was really surprised that this worked, but it did, so I'm pretty sure, that they do not have to be both connected to the same WiFi or be within a close range.
The question is, why is it not working for you. How do you check, that you are connected to the WiFi?
foo said:
I did a test recently with mine. I left my paired smartphone (Smartphone_A) far out of range of my watch (>100m within a company building). The watch signaled that it is disconnected as it was only connected by Bluetooth before. The smartphone itself was only connected to a 3G network (no WiFi active).
I used a second smartphone (Smartphone_B, obviously not paired with the watch) and activated the mobile hotspot on it. I connected the watch to the mobile hotspot using WiFi and was able to connect to my paired smartphone:
Code:
Watch<---WiFi<--->Smartphone_B<--------->3G mobile data<--------->Smartphone_A
<--------------------receive notifications-------------------------->
I was really surprised that this worked, but it did, so I'm pretty sure, that they do not have to be both connected to the same WiFi or be within a close range.
The question is, why is it not working for you. How do you check, that you are connected to the WiFi?
Click to expand...
Click to collapse
Strange
with my phone on no problems it shows my house & work network on the watch & connects showing the correct SSID
with phone off I tested it 2 ways 1 clicked on google app (disconnected ) 2 Settings- About -Connection (disconnected )
Brgds
I see the problem, I also may have misunderstood the actual problem.
The status (Google app/about) which you are referring to shows if you're connected to your watch. If your phone is off, the watch can't connect to the phone. Even if the watch is connected to your WiFi, the watch will not go directly to the internet, but will use the WiFi connection to connect to your phone (cloudsync).
You can check the WiFi connection in the WiFi setting. See if the watch was assigned an IP address, if there is one, then you're connected to the WiFi.
I think you expected that the watch can directly connect to the internet and use things like Google now directly. but this is not possible.
foo said:
I see the problem, I also may have misunderstood the actual problem.
The status (Google app/about) which you are referring to shows if you're connected to your watch. If your phone is off, the watch can't connect to the phone. Even if the watch is connected to your WiFi, the watch will not go directly to the internet, but will use the WiFi connection to connect to your phone (cloudsync).
You can check the WiFi connection in the WiFi setting. See if the watch was assigned an IP address, if there is one, then you're connected to the WiFi.
I think you expected that the watch can directly connect to the internet and use things like Google now directly. but this is not possible.
Click to expand...
Click to collapse
Yes
I checked a few things, my phone was on & the google app works, turn phone off & the google app says disconnected
in wifi settings even with phone off it says obtaining IP then connects so I thought it would connect to google app
so if I understand correctly it wont connect directly to internet but the phone (cloudsync) even if the phone is on or off
Thanks for taking the time to clarify
tclough said:
so if I understand correctly it wont connect directly to internet
Click to expand...
Click to collapse
correct
tclough said:
but the phone (cloudsync) even if the phone is on or off
Click to expand...
Click to collapse
it will connect to the phone by cloudsync only if the phone is on.
foo said:
correct
it will connect to the phone by cloudsync only if the phone is on.
Click to expand...
Click to collapse
Thanks
all seems a bit pointless to have a wifi connection but cant really use it do anything
maybe some apps or updates in the future that will utilize the wifi option ??
Thx
I guess wifi is just helpful if you get out of range of the Bluetooth connection.
At home I often get out of range of the Bluetooth connection so the watch connects to my wifi and reconnects to my watch via cloudsync as long as I stay out of Bluetooth range.
When the watch gets back in reach it connects via Bluetooth again, because this is much better for battery life.
So wifi is only there to increase range but unfortunately not for standalone functionality. I also have a Youtube client and a webbrowser on my watch (just for fun, not really useful). Both apps also need the watch and will not use a direct wifi connection to load videos/websites from the Internet.
I have a Samsung Galaxy Note 8 and I cannot seem to ever hook up to any of my devices like my smart thermostat or borescope with WiFi. People keep telling me to connect to my device and I tried to connect to it and it says that it's got a signal strength whichever one I'm connecting to but it says the internet may not be available I am so confused as a how this is even happening like people make it sound so simple but it makes no sense why I cannot connect to these devices what am I missing this is so frustrating thanks in advance for any suggestions
Perhaps you should try connecting through the devices app? I have multiple smart home items in my house and I have to use either their branded app or go through my smart hub to connect. I don't connect to any of them directly with my phone.
I'll try doing it thru the application, my end scope has an app just not sure if it will automatically detect it tho. illsee