Develop Bugs

Remote Desktop Mobile

I am unable to connect w/ a 3G connection...if I use WiFi I can make a remote desktop connection from my TyTn to my company server, but if I am on 3G I cannot connect. What am I missing?

digitalfx said:
I am unable to connect w/ a 3G connection...if I use WiFi I can make a remote desktop connection from my TyTn to my company server, but if I am on 3G I cannot connect. What am I missing?
Click to expand...
Click to collapse
make sure the connection is active before attempting to connect... so kick up internet explorer or something that initiates the connection...

I have a connection, I can see it go active then I get an error.
I tried as you suggested, the error just comes up immediatly.
ERROR:
Cannot Connect. Likely reasons are:
1. Specific Computer name does not exist
2. A network error occurred while establishing the connection.
Works fine when using WiFi or when connected to PC via USB...wont connect while on 3G

digitalfx said:
I have a connection, I can see it go active then I get an error.
I tried as you suggested, the error just comes up immediatly.
ERROR:
Cannot Connect. Likely reasons are:
1. Specific Computer name does not exist
2. A network error occurred while establishing the connection.
Works fine when using WiFi or when connected to PC via USB...wont connect while on 3G
Click to expand...
Click to collapse
mmm...i think i know your problem...
Click Start > Settings > Connections > Connections > Advanced > Select Networks... now what connection is specified in the 'Programs that automatically connect to a private network should connect using'
that should be your 'GPRS Connection' you are using to connect to your IP WAN

thanks, I had that set wrong...but still cant connect.
my 3G is setup as ISP (Cingular)...I called it "ISP"
The advanced setting had a preset called "My ISP", so I re-setup my connection and called it "My ISP" and selected it in "Programs that automatically connect to a private network should connect using:"
still wont connect.

digitalfx said:
thanks, I had that set wrong...but still cant connect.
my 3G is setup as ISP (Cingular)...I called it "ISP"
The advanced setting had a preset called "My ISP", so I re-setup my connection and called it "My ISP" and selected it in "Programs that automatically connect to a private network should connect using:"
still wont connect.
Click to expand...
Click to collapse
did you use Custel's cabs to install the Cingular Settings??

no, those always caused problems as I am using ISP not MediaNet.
btw- should have mentioned I am now using Black IV Shadow and Radio 1.43.00

Possible reason: your networkprovider has blocked the port used by remote desktop.
We had to change the gprs connection point/address when we wanted to use vpn to connect to our corporate network.
Try to get hold of at telnet application for your device and connect to port 3389 on you remote desktop server.
nadreas

digitalfx said:
no, those always caused problems as I am using ISP not MediaNet.
btw- should have mentioned I am now using Black IV Shadow and Radio 1.43.00
Click to expand...
Click to collapse
ahh well change your signature
ok... umm let me think... i want you to re-create the connections without using the My ISP... create a seperate one for Cingular...

digitalfx said:
I am unable to connect w/ a 3G connection...if I use WiFi I can make a remote desktop connection from my TyTn to my company server, but if I am on 3G I cannot connect. What am I missing?
Click to expand...
Click to collapse
I had the same problem till I created two VPN connections. One for internal use (WiFi) and one for extenal use (3G).
The internal one uses the internal IP address of the VPN server and the external one uses the external IP address.
You have to sleect which connection you want to use before starting the connection depending on whether u r using WiFi or 3G.
Hope that makes sense. It works 4 me.

GOT IT!!! Thanks

esseff said:
I had the same problem till I created two VPN connections. One for internal use (WiFi) and one for extenal use (3G).
The internal one uses the internal IP address of the VPN server and the external one uses the external IP address.
You have to sleect which connection you want to use before starting the connection depending on whether u r using WiFi or 3G.
Hope that makes sense. It works 4 me.
Click to expand...
Click to collapse
esseff, pardon my noobness but when you speak of "VPN server" is that referring to the desktop I am trying to remote connect to?
I have an ATT 8525 w/Black Satin Normal WM6 on the ATT network using MediaNet as my GPRS.
I can remote in from almost any open network via my laptop. Could it be that ATT blocks 3389? If so can I alter the port RDM uses to setup a connection?

are you able to remote connect PC to PC? (from outside of your current LAN)
if not ... its not your phone its your firewall... try disabling your firewall w/in your pc os and router.
would explain why you can connect using wifi if its part of your router and its set up as a "home network".
I'd bet if you googled this you'd find EVERYTHING you need to know.

Yes, I can connect just fine PC to PC outside the LAN. I have my custom listen port opened as required. The issue is definitely with the 8525 connection settings or the ATT service. I have trolled google pretty extensively, but have been unsuccessful in finding some quality info.

Mobile Wi-Fi router stopped working

So I've been using the Tom coding package that installs the mobile Wi-Fi router with no problems until last night... now it keeps trying to connect to ISP.Cingular and then stops... it basically doesn't work now. I've tried to uninstall and reinstalled it dozens of times with no luck.
And yet... the 3G connection works because I can browse through Opera. So...?

OhI might add that I can turn on the Wi-Fi and connect to my in-house router just fine and do what on the internet through the phone. SO... it is definitely something specific with wireless internet sharing.
???
Someone please he me I use internet sharing DAILY

You need to make sure that it is connecting to the correct address. At the bottom of the App, it should have a few different choices of connections to use. Try another one and see if it works. You may have to set up a new connections for this to work properly. Keep in mind that tethering/mobile hotspot is not covered by AT&T's wireless data plan. It is a separate monthly charge. You should be careful when using it too much at a time, so they don't block or throttle your connection.

The device I am trying to connect with to my Tilt 2 is a Samsung Galaxy Tab, and apparently it doesn't like ad-hoc, whatever that is exactly. I was told on the Galaxy Tab section of this forum that this is the case, and that I need some kind of "mobile ap", although again I do not understand what that exactly means. ???

Ah, see that's much better information. So, no, you probably won't be able to connect without another app doing so. Ad-hoc is, simply put, a connection to another device other than a router which is allowing you access to its Internet connection. If the device you're trying to connect with doesn't allow ad-hoc connections, then the Wifi Router app won't do you any good, as that is the type of connection it uses. Most mobile devices do not natively support this, however. The problem, therefore, is with the Galaxy Tab you have, not with the TP2. Find an app or mod that allows for ad-hoc connections and you'll be all set.

Well is there an apparently for the WM phone side of things that will do non ad-hoc??

No. Ad-hoc is a connection between two devices. Unless you use a router, that's how it's going to be no matter if you are using WM, a laptop, iOS, Android, et cetera. The connection type is determined by the device sending the signal. If it comes from a device, then it is ad-hoc. It is not a problem with the software. That is how wifi was designed to work in the first place. The problem, again, is with the Tab, not the WM application.

Well apparently there is a solution for the Tab that allows it to see ad-hoc networks, so I will try that and let you guys know how it went.

Can no longer connect to Ad-Hoc with Tilt 2
I have been using both the CM Internet Sharing program and the WMWifiRouter with no issues for over a year now on my AT&T Tilt 2.
One day a couple weeks ago I had been using CM to connect my laptop to the internet. everything was just fine as usual.
At some point, I had disconnected and tried to reconnect, and since then I can no longer use either of these programs.
What happens is this...I turn them on and the phone will no longer hold a connection to the ad-hoc network that is created. Up in the status bar I see the icon showing WiFi trying to connect but it will not stick anymore.
I can connect to my office and/or home wifi router still. It just will not connect to the ad-hoc network any longer.
This makes no sense to me at all, since it has always worked and was even working earlier in the day when it stopped working.
I use the tethering frequently and really need to get this solved. Any help would be greatly appreciated.

Tethering on Mobilicity - same or different ip address?

I have a question regarding tethering via wifi on my T989D.
I am using the Juggernaut v5.0 on my Telus T989D. It has wifi-sharing app built in. When I use this application to share my mobile internet with my PC, I get two different ip addresses. For example, use my PC's browser, I find my PC's ip address is 123.123.123.57, however my phone's IP address is 123.123.123.101. So my phone and my pc have different ip addresses.
Strange enough, my Samsung Vibrant (T959 from TMobile), is different. I use wifi tethering for root user app, and I find my PC and my phone (T959) share the same ip address.
Why they are different on my T989D?
The problem I am having right now is, tethering via T989D's built-in function is slow. Sometimes connection drops. However the tethering via my T959 is very reliable and fast.
Is there a way to disable built-in tethering on T989D and use the tethering for root user app on my T989D? I have tried to freeze the tether manager, but tethering for root user still has error in log and I cannot connect to it at all.
Please help, I want to fix my tethering problem with T989D.
thanks

think about it...
when you are WiFi tethering, your phone is acting as the router, and it provides its own IP to you
you don't get the Mobilicity IP on your laptop or whatever it's hooking up to your phone on WiFi

Sorry I don't get it.
Why my T989D and T959 act differently?

Basically there are two ways of tethering your phone to your PC, (to allow the PC to access the internet through your phone's data connection). The first way is connect PC to the phone, and then to configure your PC to see the phone as the network adapter. This is the method used when you configure USB tethering and you connect the PC to the phone with a USB cable. In that case there will only be 1 IP address assigned, because the PC is using the phone as the network adapter. (Imagine the phone is just an ethernet adapter for the PC)
The second way is to connect your phone to your PC and then to configure the PC to access the phone as if it were a Wireless Access Point (WAP). This is the method used when you use Wi-Fi sharing, (called Portable Hotspot). It's called sharing because the phone can share access to its data connection through its Wi-Fi hardware, for up to 8 different PCs simultaneously. In order to do this the phone has to route data requests correctly between the connected computers. It does this by assigning itself 1 IP address, and then assigning each PC that's connected to it, a different IP address. This is similar to setting up a wireless router at home to share a single internet connection between multiple PCs.
Usually USB tethering results in 1 IP address for both phone (network adapter) and PC, and Wi-Fi sharing/tethering results in 1 IP address for the phone and another IP address for each connected PC. However, I suppose it's possible to use different Wi-Fi tethering software that connects the PC to the phone via Wi-Fi, using only 1 IP address for both phone and PC, like the USB tether method. This would mean you couldn't share the connection, but it may work faster, since the phone wouldn't need to do any routing.
If the android-wifi-tether app is what you refer to as "wifi tethering for root user app", it's worth it to see if it works on the T989. (I'd be curious if it works too). However, if you're using Juggernaut 5.0, you should be able to install android-wifi-tether, and it should work. You shouldn't actually have a Tethering manager app in your list of apps, I don't and I'm using 5.0. If you do, and freezing Tethering manager doesn't allow this app to work, then I would try freezing both the Wi-Fi sharing app and the Wi-Fi sharing manager app as well. If it still doesn't work I'd be tempted to reflash the Juggernaut 5.0 ROM, and then install the android-wifi-tether app again, and see if it works.
Good Luck..

Thanks Jasnn, this really helped and I am now clear.
Yes, the application I am referring to was android-wifi-tether. It works flawlessly
on T959D. it is very slow on my T989D with Juggernaut 5.0/Telus modem.
If I reboot the phone and start tethering using android-wifi-tether, the application starts, but there is one error in log:
Setting ad-hoc mode: failed.
IP address are still different. My pc and phone has two different ipaddress.
I'd like to have the same ipaddress, also one thing bugs me is, the internet connection is not stable, the internet goes on and off. Lots of t989/D users have experienced this problem, there is no cure yet.
thanks
jasnn said:
Basically there are two ways of tethering your phone to your PC, (to allow the PC to access the internet through your phone's data connection). The first way is connect PC to the phone, and then to configure your PC to see the phone as the network adapter. This is the method used when you configure USB tethering and you connect the PC to the phone with a USB cable. In that case there will only be 1 IP address assigned, because the PC is using the phone as the network adapter. (Imagine the phone is just an ethernet adapter for the PC)
The second way is to connect your phone to your PC and then to configure the PC to access the phone as if it were a Wireless Access Point (WAP). This is the method used when you use Wi-Fi sharing, (called Portable Hotspot). It's called sharing because the phone can share access to its data connection through its Wi-Fi hardware, for up to 8 different PCs simultaneously. In order to do this the phone has to route data requests correctly between the connected computers. It does this by assigning itself 1 IP address, and then assigning each PC that's connected to it, a different IP address. This is similar to setting up a wireless router at home to share a single internet connection between multiple PCs.
Usually USB tethering results in 1 IP address for both phone (network adapter) and PC, and Wi-Fi sharing/tethering results in 1 IP address for the phone and another IP address for each connected PC. However, I suppose it's possible to use different Wi-Fi tethering software that connects the PC to the phone via Wi-Fi, using only 1 IP address for both phone and PC, like the USB tether method. This would mean you couldn't share the connection, but it may work faster, since the phone wouldn't need to do any routing.
If the android-wifi-tether app is what you refer to as "wifi tethering for root user app", it's worth it to see if it works on the T989. (I'd be curious if it works too). However, if you're using Juggernaut 5.0, you should be able to install android-wifi-tether, and it should work. You shouldn't actually have a Tethering manager app in your list of apps, I don't and I'm using 5.0. If you do, and freezing Tethering manager doesn't allow this app to work, then I would try freezing both the Wi-Fi sharing app and the Wi-Fi sharing manager app as well. If it still doesn't work I'd be tempted to reflash the Juggernaut 5.0 ROM, and then install the android-wifi-tether app again, and see if it works.
Good Luck..
Click to expand...
Click to collapse

S4 tethering to a Draytek router

Anyone know how I can attach a Galaxy S4 mini to a Draytek 2820n router?
I'll give a bit of background that might explain why I'm trying to do what I'm doing.
I'm a heavy internet user. I need to download medical image files that are 300MB at a time on a frequent basis, as well as wanting to do usual downloading from iPlayer, Sky etc, plus app updates and all the usual keeping computers up to date. I live somewhere that I cannot get a decent ADSL connection (download speed is about 256Kb/s) never mind fibre. However, do have a good 3G (HSDPA) connection with three.co.uk. Have a Draytek 2820n router so I can use a 3G dongle via the router's USB so in essence the whole house has a fairly rapid internet connection. Only problem is that three's mobile broadband plans limit you to 15GB cap per month.
I've got a Galaxy S4 mini on monthly contract which gives unlimited (All You Can Eat) data and allows tethering.
I've been able to successfully connect wifi devices to the S4 via wifi tethering and use the internet but it's a pain having to switch wifi connections if say I want to control an XBMC server on my LAN, for instance. What would be ideal is to have the router distribute the S4's internet around. I can't just put the SIM in a mobile dongle as three have a way of blocking that (something to do with IMEI recognition) and I don't want to risk trying it.
Anyone got any ideas how I might be able to go about this. The Draytek router has various settings you can put into the 3G setup - I've attached a screenshot. I've tried various things but nothing works and I'm not sure how to access the router's debugging output. I set the S4 with USB debugging on in the developer settings. Wondering if there is something I can do that is fairly straightforward on the S4 so that I can try some generic dial string settings on the router to see if that works. I'd read something about putting the S4 into USB Kies mode but I don't seem to have that option.
My other thought was I might be able to leave the S4 in wifi tethering mode and somehow bridge this with my router but that would probably screw up my LAN DHCP assignments as I'd have to switch the router DHCP off and then I would be limited to 10 connections.
Sorry it's a bit long and complex. Any thoughts anyone?

Connect to WPA2-Enterprise wifi

Is there any way for the fire TV to connect to it? My university uses it, and I was wondering if I could connect, but the access point is not showing up

Can´t look now because I´m not at home but wasn´t there a setting for a manual AP setup where you could enter the SSID by yourself?

Some organizations may keep a second network available for legacy devices like printers, XBoxes, and older machines. You can check with your university's tech support to see how you can add your device to the list of allowed access for that network.
This isn't a guarantee that this network exists for you, but most enterprise and even some residential-grade equipment have this capability.
Otherwise, you might be able to find a router or range extender that can understand and connect to WPA2-Enterprise to work around this. In a pinch, an old laptop with two wifi cards or a wifi Ethernet port should suffice.
Or you may want to scrap wifi and run an Ethernet cable to your dorm's jack or personal switch.
Related topics found through Googling, but no further help:
https://www.reddit.com/r/cordcutters/comments/2sv1ov/best_option_for_college_wifi/
https://www.reddit.com/r/fireTV/comments/2mydhh/fire_tv_stick_can_you_use_a_wireless_network_that/

Thanks the responses, but neither of them works well for me. there is a secondary unsecured wifi network, but it is just too slow to use, especially for streaming videos. I sideloaded a wifi APK onto it, and the networks DO show up, but there is no way to enter the login information (you need both a username and password.) Anyone know of an app that can do that?