I would have posted in the CM 10 nightly build thread but I can't because I am still a newbie and can't post in development threads.
Two relatively simple questions for everyone.
What type of battery life are you guys seeing on the stock cm10 kernel/ the 9-05 nightly?
My other question is, is there a way to bring up a pin unlock screen in conjunction with the slide unlocker launcher? (I searched but couldn't find the answer to this, might just be searching for the wrong thing) After you slide to the right to unlock it brings up a screen that lets you enter in your pin. I believe that those of you that had cm7 should remember this functionality and ideally I would like to keep the option of opening up other apps from the unlock screen as well as have a pin to unlock my screen.
Observation about the flicker that I was going to put in the development thread: screen flickers after switching from the camera. (CM10, 9/05 nightly, stock cm10 kernel)
silhouette004 said:
What type of battery life are you guys seeing on the stock cm10 kernel/ the 9-05 nightly?
Click to expand...
Click to collapse
Not sure what answer you are looking for here (subjective), but seems to be good. Sleeping, it is using ~1%/hour.
My other question is, is there a way to bring up a pin unlock screen in conjunction with the slide unlocker launcher? (I searched but couldn't find the answer to this, might just be searching for the wrong thing) After you slide to the right to unlock it brings up a screen that lets you enter in your pin. I believe that those of you that had cm7 should remember this functionality and ideally I would like to keep the option of opening up other apps from the unlock screen as well as have a pin to unlock my screen.
Click to expand...
Click to collapse
Its here on CM10: Menu key > System settings > Lock screen > Screen security > Show widgets before unlock.
Observation about the flicker that I was going to put in the development thread: screen flickers after switching from the camera. (CM10, 9/05 nightly, stock cm10 kernel)
Click to expand...
Click to collapse
Screen flickers still happen, for some people more than others, and not at all for some people. It isn't bad enough to make me want to stop using it.
Aerowinder said:
Not sure what answer you are looking for here (subjective), but seems to be good. Sleeping, it is using ~1%/hour.
Its here on CM10: Menu key > System settings > Lock screen > Screen security > Show widgets before unlock.
Screen flickers still happen, for some people more than others, and not at all for some people. It isn't bad enough to make me want to stop using it.
Click to expand...
Click to collapse
I know this is couple months old but thanks for the answer with the "show widgets before unlock"!
Related
Is it possible to completely disable the red 'you failed' trail that is displayed when you fail at your zigzag pattern? i know my pattern...why in the name of god would i want to display the failed pattern? what is the possible purpose other than to allow others to visualize the baseline idea of your pattern that you deftly just mussed up? why not light up the 4 digits on your ATM keyboard so you can see just which digits you hit vs the ones you intended to hit?
There must be a way to disable the pattern lock visible line. with exception to the period of time allocated to setting and verifying of the pattern to be used...i would think it should never been seen.
There should be an option to "turn visible lines off"....It should be in the same menu as adding the pattern...
JordanClay2003 said:
There should be an option to "turn visible lines off"....It should be in the same menu as adding the pattern...
Click to expand...
Click to collapse
This only disables the green line while trying to unlock instead of the red fail line
Sent from my PC36100 using XDA App
Correct. I do not want failed attempts to be displayed on the device in a red line... nor do I wish to see the green line.. i have already made the green line go away.. now to hide there red one.
Sent from my PC36100 using XDA App
just a bump in hopes of an answer...
Install the latest CM rom tons of stuff in the pattern lock settings on that rom.
P_Dub_S said:
Install the latest CM rom tons of stuff in the pattern lock settings on that rom.
Click to expand...
Click to collapse
You might want to include the fact that a lot of stuff isn't working with CM.
such as no 4g.......
WiFi not working for everyone.
no HDMI
Why anyone would give up all that, to change the pattern lock settings, is beyond me.
Well if you don't live in a 4G area or don't use HDMI then why not. Personally I'm waiting for a stable version since I use my phone for my business so I cant be using a experimental version for everyday use.
MaliciousOne said:
Why anyone would give up all that, to change the pattern lock settings, is beyond me.
Click to expand...
Click to collapse
LOL.
I too would like the fail trail to go away. I often miss the last one (because it's just a little bit out of reach) and it basically gives it all away, anyone watching and seeing the red line obviously knows which one I didn't hit.
I could obviously change my pattern so my thumb doesn't have to reach, considering it's also compromised as of late...
I am watching the CM6 development with great interest but am not willing to roll to a pre-Alpah release (according the first post of that thread). yes, i know it is working very well, but do prefer to wait for the RC1 to be available.
This may have been asked before, but haven't found any threads on this.
In Gingerbread, when you chose the password unlock option, you got the slide-to-unlock with unlock and silent sliders, and then when you slid the unlock one, you were presented with the password screen. In ICS, you just get the password screen. Is it possible to have both the ring unlock on ICS which leads to the password screen?
Thanks!
newest version of gummy has this feature. Can't say off top of my head where he got it or if he just coded it himself. Might check there first though.
Sent from my Galaxy Nexus using Tapatalk
antovolk said:
This may have been asked before, but haven't found any threads on this.
In Gingerbread, when you chose the password unlock option, you got the slide-to-unlock with unlock and silent sliders, and then when you slid the unlock one, you were presented with the password screen. In ICS, you just get the password screen. Is it possible to have both the ring unlock on ICS which leads to the password screen?
Thanks!
Click to expand...
Click to collapse
Why the Hell!!! would you want to slide and put in a password every time you use your phone? Coming from an iphone 4 that was the feature I hated the most in GB.
Am I missing something? Please Help me understand why you actually Want That?
mrnovanova said:
Why the Hell!!! would you want to slide and put in a password every time you use your phone? Coming from an iphone 4 that was the feature I hated the most in GB.
Am I missing something? Please Help me understand why you actually Want That?
Click to expand...
Click to collapse
Check out the gummy thread, there is a video that may help you understand. Basically, it allows you quick access to the camera and two other shortcuts while maintaining a security option.
I installed unlock with WiFi and it does the slide to unlock and the PIN. So when you are on a home WiFi network you just get the slide to unlock.
njKeever said:
Check out the gummy thread, there is a video that may help you understand. Basically, it allows you quick access to the camera and two other shortcuts while maintaining a security option.
Click to expand...
Click to collapse
Ohhh, I see said the blind man. That actually makes more sense than wanting to go through both (slide and pin/pattern) 20+ times a day. That's what I didn't get.
Sent from my Galaxy Nexus using xda premium
https://plus.google.com/110145431558529252718/posts/UAvWY5TXvqZ
This allows you to configure the power button to shut off the screen and not lock the device. Device autolocks after the lock timer setting. should help while driving. and win a few of the WP7 challenges
I think they messed up something because I'm using one of those apps to use a widget instead power button to lock device and after pressing that widget, lock screen shows again and after 5 seconds or something like that device really gets locked (although that new timeout is 0 seconds...)
Is it just me or could it be a bug?
Thanks in advance.
google changed the lock screen behaviour again.. so gotta wait for update to the app
I don't see that option...using the 4.0.4 ota, could it be different than the factory images?
Sent from my Galaxy Nexus using XDA
strange but i'm running stock official 4.0.4 and i don't have this feature
Yeah, I'm running the CM9 3/29 nightly (based off 4.0.4) and I'm not seeing this either.
CrazedGeek said:
Yeah, I'm running the CM9 3/29 nightly (based off 4.0.4) and I'm not seeing this either.
Click to expand...
Click to collapse
I really doubt that CM9 has moved to 4.0.4 in 24 hours.
Also..this feature does not show itself on slide unlock.
adrynalyne said:
I really doubt that CM9 has moved to 4.0.4 in 24 hours.
Click to expand...
Click to collapse
4.0.4 was merged in yesterday: http://review.cyanogenmod.com/#change,14096
EDIT: Eugh, you may be right; I think that bug's only for Trebuchet. My phone's showing 4.0.4 though.
CrazedGeek said:
4.0.4 was merged in yesterday: http://review.cyanogenmod.com/#change,14096
Click to expand...
Click to collapse
Do you see where that is just the launcher code?
Edit: Editing due to your edit
Its likely a lot of it is 4.0.4. I just am not convinced all of it is. CM does what we do; they pull directly from AOSP and then their repos. Anything not in their repos would be updated to 4.0.4, until they do it themselves.
Using GummyNex 9.5 (test build) and it's in there. VERY COOL!!!
You need the new build of 4.0.4 which was released yesterday (IMM76D). and yes it does not work for slide unlock - only for password/pattern.
adrynalyne said:
Its likely a lot of it is 4.0.4. I just am not convinced all of it is.
Click to expand...
Click to collapse
Well, it turns out it is in there, I just had slide unlock enabled. Changed it to pattern and it magically appeared (as per madmak's post).
This perfects Android for me. I am actually the one who added this option to CM7.
when you set up the security lock you will see it in there
CM already had/has a similar feature, it's under security->lockscreen->delay_screen_lock
CrazedGeek said:
Well, it turns out it is in there, I just had slide unlock enabled. Changed it to pattern and it magically appeared (as per madmak's post).
Click to expand...
Click to collapse
Thanks this worked. I usually just use slide instead of a pattern, my phone is always on me and I'm not worried about people accessing it.
Sent from my Galaxy Nexus using XDA
Hello XDA members,
Problem:
I never liked a lockscreen i just want to turn my phone on and work with it. Thats why i created a app with taskers appfactory
Solution:
The app looks a few seconds with the proximity sensor if you turn on the screen, if something is close to the sensor the phone will relock itself.
You can edit the time of checking in the settings menu.
Why this thread:
I wanted to get feedback from you to resolve problems with it and make it work better to the needs of people.
A few questions:
- Is it simple to install?
- Does it work properly?
- Feature request
- What would you like to change?
- Do you like the app?
Requirements:
- Proximity sensor
How to install with help?
- Follow step 1 and step 2 in the app
How to install manually?
- Settings -> Security -> Device administrators -> check SmartLock
- Settings -> Security -> Lockscreen -> select "none"
How to uninstall:
- Settings -> Security -> Device administrators -> uncheck SmartLock
- Uninstall as usual
What means PocketLock?
- PocketLock is a different way of locking, it will lock your phone when your screen is ON and you put it in your pocket.
You can set the directions (left, right, down) when it will check in the settings menu
- Maybe you need to set the checktime a bit higher in the settings menu. because it takes time to get your phone in your pocket.
- Maybe eats more battery (dont know it for sure)
Frequently Asked Questions:
Q. Why does SmartLock not lock my phone?
A.
- Did you enable SmartLock as Device administrator ( Settings -> security -> device administrator -> check SmartLock )
- Reset your settings in the Settings menu of SmartLock
Changelog:
See Play Store
Download:
- Play Store (Android 2.3+)
- Play Store (Android 4.0+)
AW: [APP] SmartLock - no lockscreen, proximitysensor as guard
Thanks!!
Will try now on Cm 10.1 & stock LSD and report back.
Edit: Works without Problems on Cm10.1 ! Your setup guide is very clear and easy to understand, awesome!
On stock LSD the 2nd step leads to "security settings" , but it should lead to "Lockscreen". This is not a real big problem but may confuse people.
All over this App is great, thank you very much!
Sent from my GT-I9100 using xda app-developers app
ohwarumbloss said:
Thanks!!
Will try now on Cm 10.1 & stock LSD and report back.
Edit: Works without Problems on Cm10.1 ! Your setup guide is very clear and easy to understand, awesome!
On stock LSD the 2nd step leads to "security settings" , but it should lead to "Lockscreen". This is not a real big problem but may confuse people.
All over this App is great, thank you very much!
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Thank you for your first reply, and really nice to hear you like it.
The problem with the lockscreen is that every rom is different and the place of lockscreen disabling is not the same.
So this is one thing to fix
AW: [APP] SmartLock - no lockscreen, proximitysensor as guard
Diechel said:
Thank you for your first reply, and really nice to hear you like it.
The problem with the lockscreen is that every rom is different and the place of lockscreen disabling is not the same.
So this is one thing to fix
Click to expand...
Click to collapse
Maybe 2 editions, one for stock, one for Cm10.1
But this is really no biggie, app is awesome
Sent from my GT-I9100 using xda app-developers app
Re: [APP] SmartLock - no lockscreen, proximitysensor as guard
ohwarumbloss said:
Maybe 2 editions, one for stock, one for Cm10.1
But this is really no biggie, app is awesome
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Thats an option thanks for reply
Did you already use PocketLock? so yes what do you find about it
Are you using the app right now on your device or did you already uninstalled it?
Greetings
Sent from my Transformer Prime TF201 using xda app-developers app
Re: [APP] SmartLock - no lockscreen, proximitysensor as guard
Hey!
Nice app mate. Thanks!
Really easy setup(fool proof) and working great!
Any chance of making it so it works WITH lockscreen enabled?
It's even a good idea to implement this in a ROM to avoid wrong button presses if you unlock in your pocket by mistake.
Cool!
Will test further...
Ive noticed settings are blacked out in some areas...is this normal?
RootBOX latest
DorimanX latest
Link to DorimanX Discussion Thread
pSyCh¤_O_O said:
Hey!
Nice app mate. Thanks!
Really easy setup(fool proof) and working great!
Any chance of making it so it works WITH lockscreen enabled?
It's even a good idea to implement this in a ROM to avoid wrong button presses if you unlock in your pocket by mistake.
Cool!
Will test further...
Ive noticed settings are blacked out in some areas...is this normal?
RootBOX latest
DorimanX latest
Link to DorimanX Discussion Thread
Click to expand...
Click to collapse
The blacked areas are maybe caused by the theme you are using?
I will look if i can implement the thing with lockscreen enabled, think tonight
Thanks for your response btw
AW: [APP] SmartLock - no lockscreen, proximitysensor as guard
Diechel said:
Thats an option thanks for reply
Did you already use PocketLock? so yes what do you find about it
Are you using the app right now on your device or did you already uninstalled it?
Greetings
Sent from my Transformer Prime TF201 using xda app-developers app
Click to expand...
Click to collapse
Yes I am still using it and there's no reason to uninstall it
I had no graphic bugs, btw! First Rom is stock XWLSD with Alliance Mod and 2nd is 2901 build by MCM (10.1)
Greetings!
Thomas
P.s. No, didn't try Pocket Lock, will report back!
Edit: I have no clue what Pocket Lock changes but my shopping tour went well without any unlocks so for me, your App works fine!
Sent from my GT-I9100 using xda app-developers app
Re: [APP] SmartLock - no lockscreen, proximitysensor as guard
ohwarumbloss said:
Yes I am still using it and there's no reason to uninstall it
I had no graphic bugs, btw! First Rom is stock XWLSD with Alliance Mod and 2nd is 2901 build by MCM (10.1)
Greetings!
Thomas
P.s. No, didn't try Pocket Lock, will report back!
Edit: I have no clue what Pocket Lock changes but my shopping tour went well without any unlocks so for me, your App works fine!
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Nice
PocketLock is a different way it locks your phone when screen is on and you put it in your pocket
In the settings menu you can select left,right or down. That are the conditions to check if its in your pocket.
It checks as long as you set checktime, so maybe you need a little bit more checktime for pocketlock. hehe
Hope this helps, if you think what is he talking about just say it
It can use some more battery because of movement tracking, just test it
EDIT:
Just created a Google Play developers account and i will release SmartLock in there i think tomorrow, just because i can
We will see
The easy thing is that everybody can stay up to date
Sent from my Transformer Prime TF201 using xda app-developers app
Re: [APP][BETA] SmartLock v1.1 - no lockscreen, proximitysensor as guard
Diechel said:
The blacked areas are maybe caused by the theme you are using?
I will look if i can implement the thing with lockscreen enabled, think tonight
Thanks for your response btw
Click to expand...
Click to collapse
Yes. Im using darkjelly theme sorry.
Thanks for implementing with lockscreen enabled. Nice:thumbup::thumbup:
RootBOX latest
DorimanX latest
Link to DorimanX Discussion Thread
pSyCh¤_O_O said:
Yes. Im using darkjelly theme sorry.
Thanks for implementing with lockscreen enabled. Nice:thumbup::thumbup:
RootBOX latest
DorimanX latest
Link to DorimanX Discussion Thread
Click to expand...
Click to collapse
Its not implemented yet, i will look to it.
EDIT:
Your request will be in v1.2 just made a sketch and I can enable the proximity when lockscreen is on screen
Just published v1.1 on the Play Store but need to wait till its available
EDIT:
https://play.google.com/store/apps/details?id=com.michelt.smartlock
EDIT (20-02-13 10.35):
Made a test build for lockscreen enabled, please make sure you install the old v1.0 because of new package name.
You need to make smartlock device admin again, just follow step 1 if you dont know where to find
test build: SmartLock.37.apk
Can you give feedback to me if it works for you ?
Re: [APP][BETA] SmartLock v1.1 - no lockscreen, proximitysensor as guard
Its working great with lockscreen enabled!!!:thumbup::thumbup:
Good job mate!
RootBOX latest
DorimanX latest
Link to DorimanX Discussion Thread
Did someone already test PocketLock
If yes, what do you find about it?
SmartLock v1.2 released today
- Play Store on phone [RECOMMENDED]
- Play Store web link
v1.2 (10-03-13)
- Also lock when lockscreen is enabled, double security
- Better screen on/off detection
- New type of installation helper
- Vibrate when set vibrate time
- Added installation video
Re: [APP][BETA] SmartLock v1.2 (10-03-13) no lockscreen, proximitysensor as guard
Installed SmartLock v1.2 yesterday. I'm on Disaster v9 (JB 4.2.1). Simple installation and setup. Working without any problems including PocketLock. Will have to test longer to check if there is no battery drain, but so far all looks ok.
Must say that it is really great idea and app. Until I used it I did not know how convenient and comfortable usage of my phone might be without haveing to unlock it every time. It would be great if this app could be built into rom as one of the lockscreen options.
I have noticed one issue only, nothing major - vibration time on lock sometimes is shorter then set. Lookes like it happens only when I unlock phone for few seconds and put it back into pocket.
As for app menu it is ok, I would love it more if it looked like standard android JB settings menu.
Thanks a lot for your time, effort and the app.
Pidu said:
Installed SmartLock v1.2 yesterday. I'm on Disaster v9 (JB 4.2.1). Simple installation and setup. Working without any problems including PocketLock. Will have to test longer to check if there is no battery drain, but so far all looks ok.
Must say that it is really great idea and app. Until I used it I did not know how convenient and comfortable usage of my phone might be without haveing to unlock it every time. It would be great if this app could be built into rom as one of the lockscreen options.
I have noticed one issue only, nothing major - vibration time on lock sometimes is shorter then set. Lookes like it happens only when I unlock phone for few seconds and put it back into pocket.
As for app menu it is ok, I would love it more if it looked like standard android JB settings menu.
Thanks a lot for your time, effort and the app.
Click to expand...
Click to collapse
Dear Pidu,
Thank you for your feedback and really nice to hear you like it
There should be no excessive battery drain with only SmartLock on, PocketLock can use some extra juice from your battery because of the motion sensor being used while screen is on.
I will check if i can reproduce you issue with the vibrate time
The layout of the app is a bit difficult because its made with tasker and not programmed in Java
Maybe a further release will be programmed so stay tuned.
I would like if you give feedback via play store so that other users can read it there.
Thanks
Re: [APP][BETA] SmartLock v1.2 (10-03-13) no lockscreen, proximitysensor as guard
This afternoon my daughter found big issue with PocketLock. From time to time she is using my phone to play games when travelling. Unfo PocketLock Left and Right turn screen off every time she is holding the phone horizontally while playing. Proximity sensor detects her finger and motion sensor - constant movement. Had to disable both options.
I did not notice extensive battery drain caused by PocketLock.
Will test the app few more days and then give feedback on Google Play.
Pidu said:
This afternoon my daughter found big issue with PocketLock. From time to time she is using my phone to play games when travelling. Unfo PocketLock Left and Right turn screen off every time she is holding the phone horizontally while playing. Proximity sensor detects her finger and motion sensor - constant movement. Had to disable both options.
I did not notice extensive battery drain caused by PocketLock.
Will test the app few more days and then give feedback on Google Play.
Click to expand...
Click to collapse
Understand the problem you have and will think about a solution this evening
do you maybe have a suggestion how you want it?
Re: [APP][BETA] SmartLock v1.2 (10-03-13) no lockscreen, proximitysensor as guard
Diechel said:
Understand the problem you have and will think about a solution this evening
do you maybe have a suggestion how you want it?
Click to expand...
Click to collapse
As written above I have disabled left and right options of PocketLock. Still few times phone locked when my daughter was playing and motion sensor detected downwards movement - kid simply shakes phone in different directions
It might be hard to keep PocketLock active and avoid locking in certain situations but I would prefere to avoid having to switch it off and then on manualy. Personally I find PocketLock down most useful, so it is still fine for me, but it depends on individual preferences of the user.
Pidu said:
As written above I have disabled left and right options of PocketLock. Still few times phone locked when my daughter was playing and motion sensor detected downwards movement - kid simply shakes phone in different directions
It might be hard to keep PocketLock active and avoid locking in certain situations but I would prefere to avoid having to switch it off and then on manualy. Personally I find PocketLock down most useful, so it is still fine for me, but it depends on individual preferences of the user.
Click to expand...
Click to collapse
Iam busy with a sketch which can have a notification in your statusbar with the status of SmartLock / PocketLock
You can enable the notification in the settings menu to stay forever or just come up when phone is left or right.
Normally if you click on the notification the settings menu will come up, but you can enable the option
to disable PocketLock if you click on it.
What is your first impression of that?
Think will release it today on the forum
I honestly don't know if this is the right place to ask, but I'm not sure where else I can post. CM13 in the 910V is unofficial, so I don't think I can ask on the CM forums.
I installed CM13 (the one from the 910V XDA section) in a dual-boot with stock 5.1.1. I'm still setting things up, but so far it works amazingly. I finally got to setting up fingerprints, since I saw they were supported. However, I noticed that the lockscreen doesn't have a fingerprint option. I know fingerprints aren't really that secure and all, but it's convenient and fun .
My question is: is there any way to make it so I can unlock my SM-N910V on CyanogenMod 13 using the fingerprint scanner, or do I have to settle for a pin, pattern or password while I'm in it?
Sorry if this isn't the right place to ask. If there's somewhere better, please direct me. I don't know what I'm doing ;P
Zacharee1 said:
I honestly don't know if this is the right place to ask, but I'm not sure where else I can post. CM13 in the 910V is unofficial, so I don't think I can ask on the CM forums.
I installed CM13 (the one from the 910V XDA section) in a dual-boot with stock 5.1.1. I'm still setting things up, but so far it works amazingly. I finally got to setting up fingerprints, since I saw they were supported. However, I noticed that the lockscreen doesn't have a fingerprint option. I know fingerprints aren't really that secure and all, but it's convenient and fun .
My question is: is there any way to make it so I can unlock my SM-N910V on CyanogenMod 13 using the fingerprint scanner, or do I have to settle for a pin, pattern or password while I'm in it?
Sorry if this isn't the right place to ask. If there's somewhere better, please direct me. I don't know what I'm doing ;P
Click to expand...
Click to collapse
I was dying to figure this out too.... inside the CM 13 post there are a couple posts of the trick....
The trick is to go to settings then select finger print and scan your finger super fast to register/enroll the print... once you got tat and a pin/password it should show up.. thanks to hsbadr & devinakatouch01
hsbadr said:
Not quoting the above posts because all are about fingerprint.
To successfuly enroll your fingerprint and use it to wake and unlock the device, ignore the Setup wizard and add fingerprint(s) from Settings / Lock screen until it reports "1 fingerprint set up". Try to use only one pattern (swipe your fingertip over the home key in the same way/direction)! Then, power off the screen before testing it.
Click to expand...
Click to collapse
hsbadr said:
Not quoting the above posts because all are about fingerprint.
To successfuly enroll your fingerprint and use it to wake and unlock the device, ignore the Setup wizard and add fingerprint(s) from Settings / Lock screen until it reports "1 fingerprint set up". Try to use only one pattern (swipe your fingertip over the home key in the same way/direction)! Then, power off the screen before testing it.
Click to expand...
Click to collapse
devinakatouch01 said:
As far as fingerprint goes you have to swipe really fast and a couple of times as you swipe for your "last" fingerprint .. Then it will appear that you have 1 fingerprint set up. I have multiple set up and they all work flawlessly. Image shows the point where it's asking for your last swipe and u swipe multiple times and kind of fast and it will set up correctly
Click to expand...
Click to collapse
reggaeton1991 said:
I was dying to figure this out too.... inside the CM 13 post there are a couple posts of the trick....
The trick is to go to settings then select finger print and scan your finger super fast to register/enroll the print... once you got tat and a pin/password it should show up.. thanks to hsbadr & devinakatouch01
Click to expand...
Click to collapse
I'm not sure I understand. Would you mind clarifying it a bit for me?
EDIT:
So it says I have one fingerprint enrolled, which I realize it didn't say before. It now works! Thanks