TMO S3 Kernel on my AT&T S3 ? - AT&T, Rogers, Bell, Telus Samsung Galaxy S III

All is in the title
Can i flash a TMO S3 Kernel on my S3 AT&T without brick ?
And what about TMO roms ?
Thank you

I've flashed some of there roms and kernels, most of them work. Trinity kernel will not work with our leaked firmware though, if your rom is based on that. With the ROMs you will have to change your apn settings as well to att from tmo.
Just make sure you backup before trying anything.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

they are a unified kernel, but you might have to change the apn settings. which kernel are you looking to go to?

monay
do you get charged for this any costs??

Related

Limited roms for use with tmobile sim on atti317?

Ive done flashed one t889 rom on my i317 att note 2 its basically a modded t889-i317 zip rom that works with the att note 2 and wifi calling works also but its a stockish build with only mulit window support
Are there anyother 4.1.2 roms that are t889 based that I can flash without issues...
As far as it seems ive read that you can pretty much flash any tmobile rom on an att s3 or note 2 and everything is issue free..since the variants are literally built with the same hardware
Any truth to that all I want to do ia flash a few diff roms with WIFI calling a must have for me on the i317.
Instead of sitting here on the stock att rom.
Sent from my SAMSUNG-SGH-I317 using xda premium

Can I flash the stock Tmobile ROM?

I just switched to Tmobile from AT&T and I'm wanting to use the full functionality of the Tmobile ROM, is it possible or will I damage my phone?
Did you change the sim or the full phone? Check your model number and find a rom with that model number and you should be good.
I am still using the AT&T SGH-1747 (d2att) phone. I just want to use the Tmobile ROM and I was wondering if it was safe.
You can also flash the Aroma based roms here for the d2att which will give you the option to flash as it were a T-Mo phone. (I'm guessing you have a d2att unlocked using T-Mo service) that will give you the correct APNs and build.props to let your d2att act as a d2tmo
Sent from my Samsung Galaxy S 3 using Tapatalk 2

Question about using ATT Rom

I have read that I can use a ATT ROM on my T-Mobile S4 and was wondering if I did so and then of course flashed a t-mobile kernel, if I would have wifi calling or not. I am not sure if that is part of the rom or not so wanted to just check.
HughesNet said:
I have read that I can use a ATT ROM on my T-Mobile S4 and was wondering if I did so and then of course flashed a t-mobile kernel, if I would have wifi calling or not. I am not sure if that is part of the rom or not so wanted to just check.
Click to expand...
Click to collapse
You can flash an AT&T ROM, but flashing a T-Mobile kernel will not enable WiFi Calling, because it is part of the ROM. Sorry.
The way u wanna do it by flashing an att rom on a tmobile s4 more than likely
wont work cause the wifi call feature is built deep into the tmobile roms... AND ALSO WORKS OF THE SIM CARD.
On the other hand You should be able to flash any tmobile rom.... on a att branded s4 and get wifi calling just keep the att kernel..
And keep att baseband.
This should be no diff for s4 because
On the att s3 you can flash tmobile 4.1.2 roms and get wifi calling
If it uses aroma installer and opts to keep kernel...then keep the kernel but continue flashing tmobile rom...
Ive used many tmobile roms in my att s3 with wifi calling.
Havent tried it with a tmo s4 on a att rom.... just make sure u backup stock att rom if all else fails.
Sent from my SGH-M919 using xda premium

DN3 on my Note 2?

So, I'm not sure what to do, and searching around hasn't been a whole lot of help just yet, either that or I just don't know what to search for.
I want to run ditto note 3 on my tmobile galaxy note 2, it is running on the older 4.1.2 bootloader, but on 4.3
So weeks ago, I installed android 4.3 by the instructions on this thread: http://forum.xda-developers.com/showthread.php?t=2564430
Attempting to install ditto note 3, I grabbed the latest dn3 rom from this thread http://forum.xda-developers.com/showthread.php?t=2504016
I also downloaded the modem from the a fore mentioned thread as well as Devil2-2.0.4-t0lte-DUAL-20131212
I installed the rom, rebooted, installed the modem and kernal, rebooted, and it won't find tmobile in the least.
I go to any type of connection settings for mobile networks and it claims that there is no simcard.
Any help would be appreciated.
Set the APNs. I would also get the newer Devil Kernel 2.3.2 a lot more stable..
fast.t-mobile.com
Double0EK said:
Set the APNs. I would also get the newer Devil Kernel 2.3.2 a lot more stable..
fast.t-mobile.com
Click to expand...
Click to collapse
As I said, I couldn't access any mobile network settings, all it did was give me an error and refuse to go further, so no apn settings.
Thanks for the tip about the devil kernel, I'll grab the new one.
I figured it out, at least for myself, it was a matter of using the at&t LTE port of ditto note 3, flashing the tmobile modem, and then the devils kernel.
So I'm running on 4.1.2 and I know I don't need 4.3 just need to flash Dr.ketans Wi-Fi fix... So just to make sure....
All I would need is the At&t version, my modem of course and devil kernel? I'm running in T-Mobile.

Galaxy S3 Rom Help

I have a unlocked at&t s3 i747 and use it on tmobile service. I wanted to know of there are any good roms that are based on touchwiz and could you please send a link for me. Also will the roms work for tmobile ?
[email protected] said:
I have a unlocked at&t s3 i747 and use it on tmobile service. I wanted to know of there are any good roms that are based on touchwiz and could you please send a link for me. Also will the roms work for tmobile ?
Click to expand...
Click to collapse
The ROMs will work with T-Mobile, but you will probably have to manually load the T-Mo APN settings.
Which bootloader and modem are you on? If you want TW you will not have LP roms as an option, not a problem for me but others always want the latest and greatest. TW KitKat ROMs require at least the NE4 bootloader, unless you are using one of two custom kernels with the MJB bootloader.

Categories

Resources