Develop Bugs

[Q] Help: qualcomm hd-usb qdloader 9008

Today I though let's get cm9 on my nice nitro.
What did I do:
Rooted and installed cwm bytes version
installed custom 0.3 of kernelpanic
Today I installed cmw from the market and installed the new version.
Then I installed the cm9 but it stated that the sd card was not mounted (sdcard pointer wasn't right or something).
I tried all kind of things, but cmw would not work.
So I tried to install cwm bytes version again
[HOW TO]Install ClockworkMod Recovery The easy way
and did: dd if=/dev/block/mmcblk0p6 of=/sdcard/mmcblk0p6.backup bs=4096 and dd if=/sdcard/_ExternalSD/recovery.img of=/dev/block/mmcblk0p6 bs=4096
Then I did a restart
Nothing happened, nothing at all
No screen no download mode
When I connected it to the pc, it has some usb drivers:
qualcomm hs-usb qdloader 9008
Now what?
I am from holland, so getting it back to the US is not a good option, I also don't have an email address from the seller (ebay). I already send him an ebay message, but I don't know if he is still member or something (2 months ago I bought it).
Does someone has a solution?
The name of the windows driver is Qualcomm HS-USB Qdloader 9008

Oh ****, it looks like you flashed CWM to the wrong partition. Um, I think you're going to have to try to unbrick using a .kdz, possibly the SU640 one. My unbricking guide is out of date (my fault, but real life has kept me busy), but all the information you will need is in this thread somewhere. Please read all the posts, particularly ones toward the end of the thread that will tell you how to edit your hosts file and set up a server so that the kdz update tool will let you flash the .kdz file.
Edit, I forgot to mention this will only work if you are able to get into Download Mode. Please confirm if this is the case.

Malnilion said:
Oh ****, it looks like you flashed CWM to the wrong partition. Um, I think you're going to have to try to unbrick using a .kdz, possibly the SU640 one. My unbricking guide is out of date (my fault, but real life has kept me busy), but all the information you will need is in this thread somewhere. Please read all the posts, particularly ones toward the end of the thread that will tell you how to edit your hosts file and set up a server so that the kdz update tool will let you flash the .kdz file.
Edit, I forgot to mention this will only work if you are able to get into Download Mode. Please confirm if this is the case.
Click to expand...
Click to collapse
I doubt it. p6 is the SBL (secondary bootloader), I think emergency mode depends on it.

I cannot get into download mode, I only see ethe qualcomm driver in windows, nothing else. No screen, no nothing.

Your situation is not good. Your best bet at this point is probably getting it repaired by LG/AT&T unless aremcee or someone more knowledgeable than myself can help you rescue it somehow. Whoever's post you followed that told you to flash to p6 was horribly, horribly misguided. Unfortunately, as you know now, flashing roms the manual way can be really dangerous if you overwrite the incorrect partition. I'm sorry it ended the way it did for you...

Yeah I think I screwed up... I just wanted to get ICS on the phone, anyway.
How can I repair it? My seller does not respond, is there a possibility that someone else can get it to at&t for repairs? or wouldn't that be possible?

maybe ask someone to pull (dd if=) their sbl p6 and you could try to overwrite whatever is on yours now.
worth a shot, I know on samsung phones if this happens you need a .pit files, which will help repartition. I dont know if LG has a similar option.

what software do I have to use to get the new p6 on the phone, for samsung there is ODIN, but for lg?

See, that's the thing, the closest thing we have to Odin is the KDZ update tool and as far as I know they both kind of have a caveat of needing the emergency/download mode intact. I really don't know if there is any way to rescue your device without physically getting in it and reflashing, which most people are not equipped to do.

adb probably is no go as well huh? or you would see android/LG driver...
if this was another device I may have more ideas, but I have no exp. with LG.
{tell them you just hooked it up to Itunes to sync your playlist....an it went all weird.. hahahah}
Not sure how releveant this is but I think one of the Qualcomm Phone tools may have an option for raw memory read & raw memory write.
For example READ_MEM from address 0x0200000 to 0x0250000 (from a device with a working sbl of course) and dump it to a file.
Then WRITE_MEM and cross your fingers. Very dangerous and would take some research to find the sbl memory address.
A long shot more geared towards the technically inclined.

Is there someone who can make my phone work again? I can pay you for it, otherwise I will sell the phone, broken as it is.
My seller won't respond, so I have nowhere to go. If someone want to help me, you are welcome.

search an try a jtag solution

roydejong said:
Is there someone who can make my phone work again? I can pay you for it, otherwise I will sell the phone, broken as it is.
My seller won't respond, so I have nowhere to go. If someone want to help me, you are welcome.
Click to expand...
Click to collapse
You know, you could always ship it off to LG. I sent them mine after having the EXACT same problem, and they fixed it and it's on its way home right now!

Did you have to pay for this? Do you have the contact info? Thanks.

foxdl99 said:
Did you have to pay for this? Do you have the contact info? Thanks.
Click to expand...
Click to collapse
Don't have to pay, they can't turn it on, so how would they know ? Just go to their website and fill out a warranty support form.

rani9990 said:
Don't have to pay, they can't turn it on, so how would they know ? Just go to their website and fill out a warranty support form.
Click to expand...
Click to collapse
Does it have to be within one year of original purchase and do you have to show proof of original purchase?
Sent from my LG-P930 using xda app-developers app

i can help with jtag method
or you can buy the medusa box (like me) but it's not easy to solder the wire

nickmatine said:
i can help with jtag method
or you can buy the medusa box (like me) but it's not easy to solder the wire
Click to expand...
Click to collapse
i have the same issue with my lg connect ms 840.
would you mind to share how to unbrick it.
i only have riff box here
tyvm

For the jtags you first need to check if the cpu is supported. If it is, all you have to do is disassemble the device, locate the pins solder up and go for it. Some other model may have same pinout. Just make sure it is same layout, and check if vref and gnd are in the same place. If successful connection is achieve, you just need converted files from box support. Send them full stock rom for your model. If cpu is not supported, it will take longer and will be harder. Get into the forum support of either, medusa and riff. For the OP, see if you can send it to LG but if you can't, someone at forum that lives nearby you could help you. Only solution afaik is jtag.
Sent from my Abacus

i747 Hard Bricked: QHSUSB - DLOAD : Needing a debrick.img

SGH-I747 (4.1.2 i747's please)/ SGH-i747m( If you have a official 4.3 i747m, please post a debrick.img) only:
Hi, I recently hard bricked my phone into QHSUSB DLOAD and I am going to attempt repairing it through the SD Card boot method.
http://forum.xda-developers.com/editpost.php?do=editpost&p=47431259
I need a debrick.img to flash to the SD card in a Linux OS.
I would have gotten it myself but my phone is obviously dead. I found one before on XDA, but it did not work on my device and it gave me an error in the Linux terminal when it should not have.
-snip-
The end of the 3rd boot-loader stage in mmcblk0 is at 77.3 megabytes. If you are going to help out using your device, try to refrain from uploading an image with a different ROM other than root.
Code:
dd if=/dev/block/mmcblk0 of=/sdcard/backup.img bs=2m count=81054925
The count is the amount of bytes. I am not sure if it is meant to be 1000 bytes=kilobyte or 1024 bytes=kilobyte. The count above is for 1024.
I need someone to install the Galaxy S III unified toolkit, and pull the first 7 partitions from mmcblk0 ,which is where the third bootloader stage ends.(Don't upload a heavily modified device please) http://www.skipsoft.net/?page_id=213 Once you get the files, PM me.
If anyone has a link to a working one, please post that. If you want to get your own image to help me, go ahead.
Thanks guys.

Sorry for the bump... I just need the device running again since the state it's in, it CAN be unbricked.

99ytrewq9111 said:
Sorry for the bump... I just need the device running again since the state it's in, it CAN be unbricked.
Click to expand...
Click to collapse
what happened?

winosxbuntu said:
what happened?
Click to expand...
Click to collapse
I tried to unlock what I thought was a locked bootloader(I could only enter bootloader through ADB)
I found an article that says ezunlock works on all S III's.
It corrupted my bootloader,and my phone gives off no signs of life except "Device QHSUSB-DLOAD not recognized" when plugged in.
This means the motherboard/processor wasn't able to boot from the hard disk, so then it tries the SDcard if it matches the phone close enough.
I need someone to use their rooted i747 to dump the first 77.3 megabytes of "mmcblk0". That contains the firmware and bootloaders. With that, i can burn it to an sdcard in a linux operating system and plug it into my phone.

99ytrewq9111 said:
Sorry for the bump... I just need the device running again since the state it's in, it CAN be unbricked.
Click to expand...
Click to collapse
99ytrewq9111 said:
I tried to unlock what I thought was a locked bootloader(I could only enter bootloader through ADB)
I found an article that says ezunlock works on all S III's.
It corrupted my bootloader,and my phone gives off no signs of life except "Device QHSUSB-DLOAD not recognized" when plugged in.
This means the motherboard/processor wasn't able to boot from the hard disk, so then it tries the SDcard if it matches the phone close enough.
I need someone to use their rooted i747 to dump the first 77.3 megabytes of "mmcblk0". That contains the firmware and bootloaders. With that, i can burn it to an sdcard in a linux operating system and plug it into my phone.
Click to expand...
Click to collapse
find a download link for this http://forum.xda-developers.com/showthread.php?t=1746665 (samsung galaxy s3 toolkit) which can help you fix your phone
if that does not help take it to mobiletechvideos.com and they will fix it for you REASONABLE PRICE
its XDA you will get the help you deserve PLUS i have never encounted that kind of problem HOPE TO GOD IDONT but again am sure an SD-CARD that can write firmware/system IS VALUABLE/USEFULL compared to nothing and that means there is hope left to fix bad code :laugh:

winosxbuntu said:
find a download link for this http://forum.xda-developers.com/showthread.php?t=1746665 (samsung galaxy s3 toolkit) which can help you fix your phone
if that does not help take it to mobiletechvideos.com and they will fix it for you REASONABLE PRICE
its XDA you will get the help you deserve PLUS i have never encounted that kind of problem HOPE TO GOD IDONT but again am sure an SD-CARD that can write firmware/system IS VALUABLE/USEFULL compared to nothing and that means there is hope left to fix bad code :laugh:
Click to expand...
Click to collapse
Thanks for that link! It looks very promising, and I can probably find a stock boot.IMG in there. I will work on tomorrow. If I succeed, I'll edit the OP and make a debrick guide for this drvice forum. A word of advice, try not to mess with your bootloader or you end up like me

winosxbuntu said:
find a download link for this http://forum.xda-developers.com/showthread.php?t=1746665 (samsung galaxy s3 toolkit) which can help you fix your phone
if that does not help take it to mobiletechvideos.com and they will fix it for you REASONABLE PRICE
its XDA you will get the help you deserve PLUS i have never encounted that kind of problem HOPE TO GOD IDONT but again am sure an SD-CARD that can write firmware/system IS VALUABLE/USEFULL compared to nothing and that means there is hope left to fix bad code :laugh:
Click to expand...
Click to collapse
Hi, the toolkit didn't fix my phone, but its defiantly a step up. Since I'm assuming you have the toolkit installed that you suggested it, could you do me a favor?
It will be a bit easier using the toolkit to extract the partition files. If you could pull the first 7 partitions from "mmcblk0" of your device through the toolkit, it will probably set the next step to fix my phone. (Assuming you have a 16g i747... I don't really know)
You don't have to do this of course.
Thanks man.

Bump. Can anyone help out? All I need is the first 7 partitions.
Sent from my GT-I9300 using xda app-developers app

99ytrewq9111 said:
Bump. Can anyone help out? All I need is the first 7 partitions.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
either try using this link http://forum.xda-developers.com/showpost.php?p=27239761 am pretty sure it works for all S3 models, either way on the I747 forum it has been removed, the download link does not work........ so use this
it will work, it may not work but for the time being use this toolkit and also search forums or Google on how to fix this without, i think i found some answers after i had an emmc brick with my S2 but i did not have an SD card to re-write firmware to work again on my phone so i bought the S3 and its awesome

winosxbuntu said:
either try using this link http://forum.xda-developers.com/showpost.php?p=27239761 am pretty sure it works for all S3 models, either way on the I747 forum it has been removed, the download link does not work........ so use this
it will work, it may not work but for the time being use this toolkit and also search forums or Google on how to fix this without, i think i found some answers after i had an emmc brick with my S2 but i did not have an SD card to re-write firmware to work again on my phone so i bought the S3 and its awesome
Click to expand...
Click to collapse
The problem is I need a working phone to pull the partitions. :/ I tried to use the boot image, but it had an error writing while in the linux.

99ytrewq9111 said:
The problem is I need a working phone to pull the partitions. :/ I tried to use the boot image, but it had an error writing while in the linux.
Click to expand...
Click to collapse
This one worked for me http://forum.xda-developers.com/showpost.php?p=46258374&postcount=172

I have a similar problem Hard Bricked after update to 4.3 tried to flash my phone Backup 4.1.2 and died can not log in or recovery nor danlold.Is there any solution.

Bradkirk said:
This one worked for me http://forum.xda-developers.com/showpost.php?p=46258374&postcount=172
Click to expand...
Click to collapse
Did you use an i747 or a i747m device?
If a i747m image works on an i747, it will basically fix all of my problems.

spensa said:
I have a similar problem Hard Bricked after update to 4.3 tried to flash my phone Backup 4.1.2 and died can not log in or recovery nor danlold.Is there any solution.
Click to expand...
Click to collapse
What message appears on your computer when you plug it in?
If it says QHSUSB-DLOAD, you are in faint light.
It stands for Qualcomm High Speed USD Download Mode.
What is means that your processor(qualcomm), is trying to boot, but it cannot find proper drivers for the hardware.
It will then look for something to boot from in the SDcard.
Here is a thread on how some other people were able to do it : http://forum.xda-developers.com/showthread.php?t=2439367

I have an I747M technically. I went for an actual I747M image just in case there was a slight difference. in the thread that one came from though there should be one for the actual att device if you look through it.
and just to confirm, yes the phone was blank and unresponsive. showing up as QHSUSB-DLOAD before i loaded that img onto my external SDcard. and I am using the same phone currently.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Bradkirk said:
I have an I747M technically. I went for an actual I747M image just in case there was a slight difference. in the thread that one came from though there should be one for the actual att device if you look through it.
and just to confirm, yes the phone was blank and unresponsive. showing up as QHSUSB-DLOAD before i loaded that img onto my external SDcard. and I am using the same phone currently.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Unfortunately that's the download I found that didn't work.
Thanks for trying though

damn! the only other help I can offer then, is that there is a pretty good thread on this over in the d2tmo section. someone there wrote a little tool to easily download the relevant data. might help you on your quest. or at least make it so you could ask someone that doesnt know ADB. best of luck!
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

99ytrewq9111 said:
What message appears on your computer when you plug it in?
If it says QHSUSB-DLOAD, you are in faint light.
It stands for Qualcomm High Speed USD Download Mode.
What is means that your processor(qualcomm), is trying to boot, but it cannot find proper drivers for the hardware.
It will then look for something to boot from in the SDcard.
Here is a thread on how some other people were able to do it : http://forum.xda-developers.com/showthread.php?t=2439367
Click to expand...
Click to collapse
when connected to the computer written QHSUSB-DLOAD,

spensa said:
when connected to the computer written QHSUSB-DLOAD,
Click to expand...
Click to collapse
OK , take out your battery and tell me your model number(Behind battery). And what phone company do you use?
Did you possibly save a NANDROID on a computer?
( if you have i747m, you can fix your phone, but its hard to do( I havnt done it yet)
Download this image http://forum.xda-developers.com/showpost.php?p=46258374&postcount=172 (thanks to @Bradkirk )
Follow these directions using that image above^^^ http://forum.xda-developers.com/showthread.php?t=2439367
You need to install a Linux operating system (Ubuntu works) to run the commands.
Edit:! According to the T-Mobile thread, you might need a debrick.IMG from a phone on 4.3
Once I know your phones model number, I can edit the main post and ask for you phone model's images.

99ytrewq9111 said:
OK , take out your battery and tell me your model number(Behind battery). And what phone company do you use?
Did you possibly save a NANDROID on a computer?
( if you have i747m, you can fix your phone, but its hard to do( I havnt done it yet)
Download this image http://forum.xda-developers.com/showpost.php?p=46258374&postcount=172 (thanks to @Bradkirk )
Follow these directions using that image above^^^ http://forum.xda-developers.com/showthread.php?t=2439367
You need to install a Linux operating system (Ubuntu works) to run the commands.
Edit:! According to the T-Mobile thread, you might need a debrick.IMG from a phone on 4.3
Once I know your phones model number, I can edit the main post and ask for you phone model's images.
Click to expand...
Click to collapse
I took it to a service to repair

N7105 factory mode

Hi guys, i seriously need help here. Please refer to attached screenshot.
I came here after flashing sokp 4.2.2 rom, and it prompted me an error saying encryption was unsuccessful. After which, i wasnt able to use my phone since then.
I tried to flash stock rom, and I end up with this. Please dont tell me to search the forums because Ive been to them countless times. I suppose this is a efs issue, because baseband and imei are unknown and I do not have a backup for it. Tried with the writing tool for imei, doesnt work as well.
Pls ask me for any info u might need/i missed out to help with this issue.

I think it's in the efs folder, you have to use a root browser and edit factory mode to off instead of on. It's been a long time since I saw factory mode so I'm not 100%
Sent from my GT-N7105 using Tapatalk

sawdoctor said:
I think it's in the efs folder, you have to use a root browser and edit factory mode to off instead of on. It's been a long time since I saw factory mode so I'm not 100%
Sent from my GT-N7105 using Tapatalk
Click to expand...
Click to collapse
Thanks for your reply. But even if I off factory mode, will the baseband and imei be unknown?

I'm not sure but if it doesn't the 2 things that might be worth trying are, emergency firmware recovery with kies or mskips toolkit has a rescue package but I think you have to go to skipsoft.net now as the thread was closed
Sent from my GT-N7105 using Tapatalk

It's current value is "OFF"...u have to write "ON"...i know it sounds weird but that is the value. Amd if u don't have any previous back up of EFS then there's nothing u can do at home to bring it back. Same thing happened to mine and i got it repaired from a local shop for cheap...they used z3x box...the problem is my IMEI is correct and network works fine...but everytime i flash a ROM i have to take it to the shop and get the modem patched or else it doesn't connect to network. So go to Samsung service centre and get it fixed by them...they'll charge u more but their fix is permanent.
Sent from my GT-N7100 using XDA Free mobile app

Alright, it seems like i have a backup of the efs, bt the nv_data.bin file is not included, and i read on other threads that this file is responsible for the imei and all? This backup is dated in aug2013, but it doesnt help in restoring my phone because the efs pro software doesnt see this as a backup file. Im actually looking for one of the thread that actually taught how to edit the nv_data.bin file, but no luck till date.

This thread might help
http://forum.xda-developers.com/showthread.php?t=1946915
[WARNING! + GUIDE] Backup and Restore IMEI / NV Data Procedure for GT-I9305. There is another post in this thread where they flashed the param.bin file
Check out the last post in this thread
http://forum.xda-developers.com/showthread.php?t=2724169
[Q]Null Imei, Baseband Unknown N7105
Sent from my GT-N7105 using Tapatalk

is it safe to flash the file that is intended for i9300? i dare not do that in case it doesnt work coz is different models.

ok my phone's all fixed up now. If anyone is interested to know, samsung kies original firmware helped.

Need Sprint LG-LK430 QCN - LG Gpad F7.0

Good Morning Everyone!!!
First off I would like to say sorry if i am posting this under the wrong section but i was not able to find a section for the Gpad 7.0 (if it is can a mod please move) So back to my dilemma here well I hard brick my New LG GPad from sprint a few days ago and I cannot get this thing up and running mainly because of the lack of availability of files (No KDZ, No TOT) so im wondering is someone on the forums who owns a WORKING Sprint LG GPad F7.0 (LGLK430) would be able to send me a copy of a backup of the device from QPST in the QCN format so that i can try to restore my device that way. Or if someone has one of the lg firmware files preferably the TOT or the hex files for QPST (None of the ones i have found online seem to be compatible with this device) that would work aswell. I know alor of people are going to say " Why dont you just take it back to sprint?" and I dont want to do this because i enjoy working with my devices and leaning new things and correcting my mistakes, taking the tablet back will be like my last resort. So sorry for the long post but i just wanna say thanks in advance to anyone who can help out

Hi! I don't have your device but if I might make a suggestion. Google for lg_imei_checker_2014_b1, enter your device's IMEI and see if the IMEI checker will provide a download for a KDZ for your device. Good luck!

Hello, Thank you for the response unfortunately i have already tried this method and there does not seem to be one publicly available and i say that because this website gaodi.net seems to have the TOT and KDZ but i was not able to get an account setup or meet the requirement due to unknown errors

paradise13 said:
Hello, Thank you for the response unfortunately i have already tried this method and there does not seem to be one publicly available and i say that because this website gaodi.net seems to have the TOT and KDZ but i was not able to get an account setup or meet the requirement due to unknown errors
Click to expand...
Click to collapse
i have tried registering for this site to download the LK430 stock firmware as well i made an account but need a certain amount of points to download it and this site seems to be the only one that has the firmware so it kinda sucks lol can anyone find this firmware on another site???
heres a link to the site if anyone can help it would be greatly appreciated
http://mobile.gaodi.net/forum.php?mod=viewthread&tid=668701

Sprint LK430
http://mobile.gaodi.net/forum.php?mod=viewthread&tid=668701[/QUOTE]
I have tried registering for the site and am trying to obtain points to download the file but the requirement requires $$$$$ :crying: IF anyone finds the stock files for this tab would be greatly appreciated

I have a stock Gpad 7 and would gladly help you if you can tell me how to do it
Sent from my LGLK430 using Tapatalk

LittleRedDot said:
I have a stock Gpad 7 and would gladly help you if you can tell me how to do it
Sent from my LGLK430 using Tapatalk
Click to expand...
Click to collapse
Thanks hun that would be awesome. as for the steps if you could please try this guide and let me know if you have success with it.
sanfranciscoandroid.co.uk/android/unlock-orange-san-francisco-ii/install-qpst-and-backup-qcn-orange-san-francisco-ii/

sprint stock recovery
could you upload a copy of your recovery. i cannot get mind to work and my tab is all hosed up. thanks
LittleRedDot said:
I have a stock Gpad 7 and would gladly help you if you can tell me how to do it
Sent from my LGLK430 using Tapatalk
Click to expand...
Click to collapse

LittleRedDot said:
I have a stock Gpad 7 and would gladly help you if you can tell me how to do it
Sent from my LGLK430 using Tapatalk
Click to expand...
Click to collapse
anyway you could upload a copy of the recovery image for the sprint variant

bsteady2 said:
anyway you could upload a copy of the recovery image for the sprint variant
Click to expand...
Click to collapse
can't post a link. PM you the lk430 recovery I saved.

ghostxxxx said:
can't post a link. PM you the lk430 recovery I saved.
Click to expand...
Click to collapse
If you still have a LK430 stock recovery image I would really appreciate the link to download. My Gpad 7.0 from sprint is in a loop...Thanks!

tekgeek101 said:
If you still have a LK430 stock recovery image I would really appreciate the link to download. My Gpad 7.0 from sprint is in a loop...Thanks!
Click to expand...
Click to collapse
PM sent.

Hey do you remember what site show you how to extract the recovery. I'm having a difficult time trying to get it back on my device. It won't get out of fastboot mode

bsteady2 said:
Hey do you remember what site show you how to extract the recovery. I'm having a difficult time trying to get it back on my device. It won't get out of fastboot mode
Click to expand...
Click to collapse
http://forum.xda-developers.com/g-pad-10/general/dev-thread-lg-g-pad-7-0-8-0-10-1-t2838995
I followed this. Actually, I saw your post in this thread in the first place when I googled "lk430 recovery".

ghostxxxx said:
http://forum.xda-developers.com/g-pad-10/general/dev-thread-lg-g-pad-7-0-8-0-10-1-t2838995
I followed this. Actually, I saw your post in this thread in the first place when I googled "lk430 recovery".
Click to expand...
Click to collapse
Hello! I am also stuck in a boot loop. If you would please send the link for the stock image, I would greatly appreciate it! Thank you.

ghostxxxx said:
can't post a link. PM you the lk430 recovery I saved.
Click to expand...
Click to collapse
If you could send me that link I would be very greatful!

Alvien89 said:
If you could send me that link I would be very greatful!
Click to expand...
Click to collapse
Don't wanna mislead people. I'm not an experienced guy. I dumpped the stock recovery following the instruction in the thread (http://forum.xda-developers.com/g-pad-10/general/dev-thread-lg-g-pad-7-0-8-0-10-1-t2838995). But, I'm not sure if I did it correctly and is this the file to save your pad from not booting or how to do it. The bottom line is that I don't wanna make it worse.
So, if you know what you're doing and you can tell from the file that it is exactly what you are looking for, PM me and I'll send you the link. Otherwise, I suggest you may get help from someone knows about compile stuff.

ghostxxxx said:
Don't wanna mislead people. I'm not an experienced guy. I dumpped the stock recovery following the instruction in the thread (http://forum.xda-developers.com/g-pad-10/general/dev-thread-lg-g-pad-7-0-8-0-10-1-t2838995). But, I'm not sure if I did it correctly and is this the file to save your pad from not booting or how to do it. The bottom line is that I don't wanna make it worse.
So, if you know what you're doing and you can tell from the file that it is exactly what you are looking for, PM me and I'll send you the link. Otherwise, I suggest you may get help from someone knows about compile stuff.
Click to expand...
Click to collapse
I'm not sure if you got my PM, but I do know exactly what I need. That is the stock recovery.img for the LG G Pad F 7.0 LK430 (which is the Sprint variant).
I made the mistake of attempting to install TWRP for a different version of the G Pad back when I originally bought the device. Now I have no recovery.img and cannot factory reset. If you have extracted the recovery.img from your stock LK430, that would indeed help me and I would greatly appreciate it.
Sent from my LGLS991 using Tapatalk

Could someone please send me the recovery image as well? (Or ideally, upload it to a file hosting site and post a link so that people don't have to keep bugging you for it!) I want to install Xposed but I have no way of backing up my device since Nandroid doesn't support it! I rather have to go back to factory than be stuck with a brick should anything go horribly wrong. Thanks.

Psythik said:
Could someone please send me the recovery image as well? (Or ideally, upload it to a file hosting site and post a link so that people don't have to keep bugging you for it!) I want to install Xposed but I have no way of backing up my device since Nandroid doesn't support it! I rather have to go back to factory than be stuck with a brick should anything go horribly wrong. Thanks.
Click to expand...
Click to collapse
Could you please provide an online storage which doesn't need register? I'll upload files to it.

[Q] ATT ZE500CL/Z00D Bricked After OTA Update - HELP (ZenFone 2E)

I have an ATT ZenFone 2E that I rooted successfully with this guide (http://forum.xda-developers.com/showthread.php?t=3116531). Due to an error on my part(fat finger) I accidentally started the OTA update. Now when I try to boot the phone all I get is the AT&T logo/splash screen. I can get it to go into recovery mode and it also will connect via ADB. I have tried flashing the UL-ASUS_Z00D-WW-12.16.5.30-user.zip firmware via ADB fastboot but I get an error saying firmware is wrong carrier ATT (WW). Am I using the wrong firmware for AT&T? I have searched all over and cannot find any ZenFone 2 firmware other than WW, TW, and CN. Any help or suggestions much appreciated.

JRSouth said:
I have an ATT ZenFone 2E that I rooted successfully with this guide (http://forum.xda-developers.com/showthread.php?t=3116531). Due to an error on my part(fat finger) I accidentally started the OTA update. Now when I try to boot the phone all I get is the AT&T logo/splash screen. I can get it to go into recovery mode and it also will connect via ADB. I have tried flashing the UL-ASUS_Z00D-WW-12.16.5.30-user.zip firmware via ADB fastboot but I get an error saying firmware is wrong carrier ATT (WW). Am I using the wrong firmware for AT&T? I have searched all over and cannot find any ZenFone 2 firmware other than WW, TW, and CN. Any help or suggestions much appreciated.
Click to expand...
Click to collapse
i have the exact problem since saturday, you have to use the ATT firmware but i couldnt find it anywhere

also
please pm me if u fixed yours

Lactaid said:
please pm me if u fixed yours
Click to expand...
Click to collapse
Still no luck. I'm sure if we could find the AT&T firmware we would be able to recover. Unfortunately it appears it is not available on ASUS support and AT&T doesn't even provide firmware. Our only hope may be from a backup of another device that isn't bricked.
Does anybody know if we could possibly use the temporary CWM recovery used in the root method to flash to another ROM that is compatible with this device? Any input would be greatly appreciated.

Are there any details I can provide that would be helpful in finding a solution to recover this device? I've seen a few other people are having the same issue as I am and I would like to help them as well if I can get mine fixed. Thanks

JRSouth said:
Are there any details I can provide that would be helpful in finding a solution to recover this device? I've seen a few other people are having the same issue as I am and I would like to help them as well if I can get mine fixed. Thanks
Click to expand...
Click to collapse
ive literally tried everything, my device has been bricked for like 3 weeks now

Lactaid said:
ive literally tried everything, my device has been bricked for like 3 weeks now
Click to expand...
Click to collapse
Just out of curiosity have you tried running the xoa_unroot.bat while your device is in recovery/fastboot mode? Im not sure if it will help but I've found in other threads that to avoid soft bricking your device you must run the unroot prior to applying the OTA update. I'm sure it's probably too late but maybe worth a shot. I'm going to try it when I get home from work today.

JRSouth said:
Just out of curiosity have you tried running the xoa_unroot.bat while your device is in recovery/fastboot mode? Im not sure if it will help but I've found in other threads that to avoid soft bricking your device you must run the unroot prior to applying the OTA update. I'm sure it's probably too late but maybe worth a shot. I'm going to try it when I get home from work today.
Click to expand...
Click to collapse
i havent tried it yet, do you have a tutorial of it?

The truth hurts, your screwd. This is a budget phone. At&t will not support it. Throw away device my their standards.

http://forum.xda-developers.com/attachment.php?attachmentid=3505774&d=1444776691 here the system image for the file maybe try to flash it to see if it helps

http://forum.xda-developers.com/showpost.php?p=63323103&postcount=118
^^^This worked for me successfully!
Make sure to only restore system and disable MD5 Checksum Verification.

I have the same problem, what do I do with that file? How do I apply it through the SD, so I can apply update from SD? I forgot pin code to phone so i need to restore

need help
Lactaid said:
http://forum.xda-developers.com/attachment.php?attachmentid=3505774&d=1444776691 here the system image for the file maybe try to flash it to see if it helps
Click to expand...
Click to collapse
how do I flash this?

Hola, alguien lo consiguió hacer..???

Lactaid said:
http://forum.xda-developers.com/attachment.php?attachmentid=3505774&d=1444776691 here the system image for the file maybe try to flash it to see if it helps
Click to expand...
Click to collapse
Im getting an error that day footer is wrong :/

m1chb3ltr3 said:
Im getting an error that day footer is wrong :/
Click to expand...
Click to collapse
Wait, are you bricked and tried using that as the fix? I cant post links but Check out Asus, They have Firmware, Kernel (havent checked but read it earlier today), and Boot Unlock that you can get right from (assuming you have an account) My Products.
Also... Has anyone used that method recently?
Cathaterfish said:
Sorry I will give credit to DavePmer for his guide in minute, but qouting him for some reason wouldnt let me post, even when I removed the links? anyways I'll edit and give credit I promise
So my phone is stuck on the Asus Logo, I downloaded all of this and followed the instructions all the way up to:
11) now the fun part. open your microsd card and check the folder TWRP\BACKUPS see if it has a folder named
01234567890123456789 if it does great if not, not a problem just copy all the system files from the folder
you extracted TWRP-zf2e-ATT_12.16.10.7 to your microsd card TWRP\BACKUP\01234567890123456789\ whatever folder you have next\ in other words, replace your system.ext4.win000 files with my system.ext4.win000 file.
Replace your system.ext4.win001 with mine, and replace system.ext4.win00.md5 with mine as well as system.ext4.win001.md5 when done safely dismount the microsd card.
It then occurred to me that i should be more careful this time around... This was from October and although I ran across links saying for the most part that this was a good shot for fixing my ZE500CL, Z00D or whatever. But things have changed since then and I was wondering if this is still the best/easiest/safe route. I learned pretty quick that over looking things like OTA/Root or in my case Making assumptions is a fast path to really doing a number on your phone. (Honestly I just started even giving thought to rooting my phone, just considered them back ups I kept in a box). I now have the itch to do this right so hoping to fix this and go about this the right way.
Thanks for any input.
Currently DLing RussaiNBeaR, went and bought a card reader/writer. I was going to Download the firmware, kernel and boot unlock tool but currently staying at a place where im getting 160kbs on my DL's. So if I can get away with davepmer's guide that would be great, or something other or smaller than downloading 4gbs on this Internet Connection.
EDIT: Forgot to add that I haven't completed this step yet because the wording kind of tripped me up. And I want to do this right. When he says "in other words replace your system.ext4.win000 files with my system.ext4.win000 file." and then goes on and 3 more to the list. Does that mean only copy and replace those 4? or does that include all system.(whatever).(extension) files? Im sure it sounds really dumb or noobish but the fact that the next step is using twrp to restore using system only makes me afraid to do this part wrong.
Click to expand...
Click to collapse

ayuda
ATT ZE500CL/Z00D rom